HH3C-VOICE-IF-MIB
- Registered at
- 1.3.6.1.4.1.25506.2.39.13
- Last updated
- 2007-12-10 17:00
- Organization
- New H3C Technologies Co., Ltd.
- Revisions
- 2007-12-10 17:00
- Namespace
- comware
- Source file
HH3C-VOICE-IF-MIB- Digest
sha256:a01c55c06825fbc1488638f98f1718ea7dbaa223de11879f6527598001614f80
Description
This MIB file is to provide the definition of the voice interface general configuration.
Contact
Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China Http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| HH3C-OID-MIB | hh3cVoice |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HH3C-OID-MIB HH3C-VOICE-IF-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hh3cVoiceIfObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.39.13.1 | |||
| hh3cVoiceIfConfigTable OBJECT-TYPE The table contains configurable parameters for both analog voice interface and digital voice interface. | 1.3.6.1.4.1.25506.2.39.13.1.1 | not-accessible | current | |
| hh3cVoiceIfConfigEntry OBJECT-TYPE The entry of voice interface table. | 1.3.6.1.4.1.25506.2.39.13.1.1.1 | not-accessible | current | |
| hh3cVoiceIfCfgCngOn OBJECT-TYPE This object indicates whether the silence gaps should be filled with background noise. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. | 1.3.6.1.4.1.25506.2.39.13.1.1.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| hh3cVoiceIfCfgNonLinearSwitch OBJECT-TYPE This object expresses the nonlinear processing is enable or disable for the voice interface. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. Currently, only digital voice subscriber lines can be set disabled. | 1.3.6.1.4.1.25506.2.39.13.1.1.1.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| hh3cVoiceIfCfgInputGain OBJECT-TYPE This object indicates the amount of gain added to the receiver side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. | 1.3.6.1.4.1.25506.2.39.13.1.1.1.3 | Integer32 (-140..139) | read-write | current |
| hh3cVoiceIfCfgOutputGain OBJECT-TYPE This object indicates the amount of gain added to the send side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. | 1.3.6.1.4.1.25506.2.39.13.1.1.1.4 | Integer32 (-140..139) | read-write | current |
| hh3cVoiceIfCfgEchoCancelSwitch OBJECT-TYPE This object indicates whether the echo cancellation is enabled. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. | 1.3.6.1.4.1.25506.2.39.13.1.1.1.5 | INTEGER {enable(1), disable(2)} | read-write | current |
| hh3cVoiceIfCfgEchoCancelDelay OBJECT-TYPE This object indicates the delay of the echo cancellation for the voice interface. This value couldn't be modified unless hh3cVoiceIfCfgEchoCancelSwitch is enable. Unit is milliseconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. The default value of this object is 32. | 1.3.6.1.4.1.25506.2.39.13.1.1.1.6 | Integer32 (0..64) | read-write | current |
| hh3cVoiceIfCfgTimerDialInterval OBJECT-TYPE The interval, in seconds, between two dialing numbers. The default value of this object is 10 seconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line. | 1.3.6.1.4.1.25506.2.39.13.1.1.1.7 | Integer32 (1..300) | read-write | current |
| hh3cVoiceIfCfgTimerFirstDial OBJECT-TYPE The period of time, in seconds, before dialing the first number. The default value of this object is 10 seconds. It is applicable to FXO, FXS subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line. | 1.3.6.1.4.1.25506.2.39.13.1.1.1.8 | Integer32 (1..300) | read-write | current |
| hh3cVoiceIfCfgPrivateline OBJECT-TYPE This object indicates the E.164 phone number for plar mode. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. | 1.3.6.1.4.1.25506.2.39.13.1.1.1.9 | DisplayString (SIZE(0..31)) | read-write | current |
| hh3cVoiceIfCfgRegTone OBJECT-TYPE This object uses 2 or 3 letter country code specify voice parameters of different countrys. This value will take effect on all voice interfaces of all cards on the device. | 1.3.6.1.4.1.25506.2.39.13.1.1.1.10 | OCTET STRING (SIZE(0 | 2..3)) | read-write | current |