MIBs Depot

HH3C-PPP-OVER-SONET-MIB

Registered at
1.3.6.1.4.1.25506.2.19
Last updated
2016-09-09 17:00
Organization
New H3C Tech. Co., Ltd.
Revisions
2016-09-09 17:00, 2013-10-10 17:00, 2010-05-19 17:00, 2007-07-19 17:00
Namespace
comware
Source file
HH3C-PPP-OVER-SONET-MIB
Digest
sha256:e3834cdd9c680fbde34fbb3678129233a77f1d2224444fdb2965123dc87c0da6

Description

This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions.

Contact

Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085

Imports

FromSymbols
HH3C-OID-MIBhh3cCommon
IF-MIBifDescr, ifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HH3C-OID-MIB
HH3C-PPP-OVER-SONET-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hh3cPosMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.19.1
hh3cPosParamTable
OBJECT-TYPE
The pos parameter table.
1.3.6.1.4.1.25506.2.19.1.1not-accessiblecurrent
hh3cPosParamTableEntry
OBJECT-TYPE
The entry of pos table.
1.3.6.1.4.1.25506.2.19.1.1.1not-accessiblecurrent
hh3cPosCRC
OBJECT-TYPE
The length of CRC
1.3.6.1.4.1.25506.2.19.1.1.1.1INTEGER {crc32(1), crc16(2)}read-writecurrent
hh3cPosMTU
OBJECT-TYPE
Maximum Transfer Unit (MTU) of POS interface
1.3.6.1.4.1.25506.2.19.1.1.1.2Integer32read-writecurrent
hh3cPosScramble
OBJECT-TYPE
Scrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or not
1.3.6.1.4.1.25506.2.19.1.1.1.3TruthValueread-writecurrent
hh3cPosClockSource
OBJECT-TYPE
The value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remote
1.3.6.1.4.1.25506.2.19.1.1.1.4INTEGER {system(1), line(2)}read-writecurrent
hh3cPosSdhFlagJ0
OBJECT-TYPE
The section trace byte. This node is used when the frame type is sdh.
1.3.6.1.4.1.25506.2.19.1.1.1.5DisplayString (SIZE(0..15))read-writecurrent
hh3cPosSdhFlagJ1
OBJECT-TYPE
The path trace byte. This node is used when the frame type is sdh.
1.3.6.1.4.1.25506.2.19.1.1.1.6DisplayString (SIZE(0..15))read-writecurrent
hh3cPosSonetFlagJ0
OBJECT-TYPE
The section trace byte. This node is used when the frame type is sonet.
1.3.6.1.4.1.25506.2.19.1.1.1.7Integer32 (0..255)read-writecurrent
hh3cPosSonetFlagJ1
OBJECT-TYPE
The path trace byte. This node is used when the frame type is sonet.
1.3.6.1.4.1.25506.2.19.1.1.1.8DisplayString (SIZE(0..62))read-writecurrent
hh3cPosFlagC2
OBJECT-TYPE
The parameter for the channel signal value of C2 byte
1.3.6.1.4.1.25506.2.19.1.1.1.9Integer32 (0..255)read-writecurrent
hh3cPosFrameType
OBJECT-TYPE
The frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network).
1.3.6.1.4.1.25506.2.19.1.1.1.10INTEGER {sdh(1), sonet(2)}read-writecurrent
hh3cPosBindVlanId
OBJECT-TYPE
The vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link status or this pos.
1.3.6.1.4.1.25506.2.19.1.1.1.11Integer32 (0..4095)read-writecurrent
hh3cPosEncapsulation
OBJECT-TYPE
The type of encapsulation
1.3.6.1.4.1.25506.2.19.1.1.1.12INTEGER {ppp(1), hdlc(2), fr(3), mfr(4)}read-writecurrent
hh3cPoskeepaliveTimeout
OBJECT-TYPE
The keeplive of ppp, hdlc, fr or mfr. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link.
1.3.6.1.4.1.25506.2.19.1.1.1.13Integer32 (0..32767)read-writecurrent
hh3cPosBERthresholdSF
OBJECT-TYPE
The bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold.
1.3.6.1.4.1.25506.2.19.1.1.1.14Integer32 (3..9)read-writecurrent
hh3cPosBERthresholdSD
OBJECT-TYPE
The bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold.
1.3.6.1.4.1.25506.2.19.1.1.1.15Integer32 (3..9)read-writecurrent
hh3cPosB1Error
OBJECT-TYPE
Counter for SBIPE(Section Bit Interleave Parity Error)
1.3.6.1.4.1.25506.2.19.1.1.1.16Counter64read-onlycurrent
hh3cPosB2Error
OBJECT-TYPE
Counter for LBIPE(Line Bit Interleave Parity Error)
1.3.6.1.4.1.25506.2.19.1.1.1.17Counter64read-onlycurrent
hh3cPosB3Error
OBJECT-TYPE
Counter for PBIPE(Path Bit Interleave Parity Error)
1.3.6.1.4.1.25506.2.19.1.1.1.18Counter64read-onlycurrent
hh3cPosM1Error
OBJECT-TYPE
How many times does LREI(Line Remote Error Indication) occur
1.3.6.1.4.1.25506.2.19.1.1.1.19Counter64read-onlycurrent
hh3cPosG1Error
OBJECT-TYPE
How many times does PREI(Path Remote Error Indication) occur
1.3.6.1.4.1.25506.2.19.1.1.1.20Counter64read-onlycurrent
hh3cPosFlagJ0Type
OBJECT-TYPE
The frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.
1.3.6.1.4.1.25506.2.19.1.1.1.21INTEGER {sdh(1), sonet(2)}read-writecurrent
hh3cPosFlagJ1Type
OBJECT-TYPE
The frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.
1.3.6.1.4.1.25506.2.19.1.1.1.22INTEGER {sdh(1), sonet(2)}read-writecurrent
hh3cPosB1TCAThreshold
OBJECT-TYPE
Threshold for B1 TCA.
1.3.6.1.4.1.25506.2.19.1.1.1.23Integer32 (3..9)read-writecurrent
hh3cPosB2TCAThreshold
OBJECT-TYPE
Threshold for B2 TCA.
1.3.6.1.4.1.25506.2.19.1.1.1.24Integer32 (3..9)read-writecurrent
hh3cPosB3TCAThreshold
OBJECT-TYPE
Threshold for B3 TCA.
1.3.6.1.4.1.25506.2.19.1.1.1.25Integer32 (3..9)read-writecurrent
hh3cPosB1TCAEnable
OBJECT-TYPE
Enable traps of B1 TCA.
1.3.6.1.4.1.25506.2.19.1.1.1.26INTEGER {enable(1), disable(2)}read-writecurrent
hh3cPosB2TCAEnable
OBJECT-TYPE
Enable traps of B2 TCA.
1.3.6.1.4.1.25506.2.19.1.1.1.27INTEGER {enable(1), disable(2)}read-writecurrent
hh3cPosB3TCAEnable
OBJECT-TYPE
Enable traps of B3 TCA.
1.3.6.1.4.1.25506.2.19.1.1.1.28INTEGER {enable(1), disable(2)}read-writecurrent
hh3cPosMIBNotificationsPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.19.2
hh3cPosMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.19.2.0

Notifications

NameOIDStatus
hh3cPosLOSAlarm
NOTIFICATION-TYPE
Alarm indicates loss of signal
1.3.6.1.4.1.25506.2.19.2.0.1current
hh3cPosLOFAlarm
NOTIFICATION-TYPE
Alarm indicates loss of frame
1.3.6.1.4.1.25506.2.19.2.0.2current
hh3cPosOOFAlarm
NOTIFICATION-TYPE
Alarm indicates out of frame
1.3.6.1.4.1.25506.2.19.2.0.3current
hh3cPosLAISAlarm
NOTIFICATION-TYPE
Alarm when LAIS(Line Alarm Indication Signal) arrives
1.3.6.1.4.1.25506.2.19.2.0.4current
hh3cPosLRDIAlarm
NOTIFICATION-TYPE
Alarm when LRDI(Line Remote Defect Indication) arrives
1.3.6.1.4.1.25506.2.19.2.0.5current
hh3cPosPRDIAlarm
NOTIFICATION-TYPE
Alarm when PRDI(Path Remote Defect Indication) arrives
1.3.6.1.4.1.25506.2.19.2.0.6current
hh3cPosPAISAlarm
NOTIFICATION-TYPE
Alarm when PAIS(Path Alarm Indication Signal) arrives
1.3.6.1.4.1.25506.2.19.2.0.7current
hh3cPosLOPAlarm
NOTIFICATION-TYPE
Alarm indicates loss of pointer
1.3.6.1.4.1.25506.2.19.2.0.8current
hh3cPosSTIMAlarm
NOTIFICATION-TYPE
Alarm indicates inconsistency between sent and received J0 bytes.
1.3.6.1.4.1.25506.2.19.2.0.9current
hh3cPosPTIMAlarm
NOTIFICATION-TYPE
Alarm indicates inconsistency between sent and received J1 bytes.
1.3.6.1.4.1.25506.2.19.2.0.10current
hh3cPosPSLMAlarm
NOTIFICATION-TYPE
Alarm indicates a mismatched C2 byte.
1.3.6.1.4.1.25506.2.19.2.0.11current
hh3cPosLSDAlarm
NOTIFICATION-TYPE
Alarm indicates that the B2 bit-error rate exceeds SD threshold.
1.3.6.1.4.1.25506.2.19.2.0.12current
hh3cPosLSFAlarm
NOTIFICATION-TYPE
Alarm indicates that the B2 bit-error rate exceeds SF threshold.
1.3.6.1.4.1.25506.2.19.2.0.13current
hh3cPosNormalAlarm
NOTIFICATION-TYPE
Alarm indicates that the Pos interface state returns normal.
1.3.6.1.4.1.25506.2.19.2.0.14current
hh3cPosB1TCAlarm
NOTIFICATION-TYPE
Threshold crossing alarms for B1.
1.3.6.1.4.1.25506.2.19.2.0.15current
hh3cPosB2TCAlarm
NOTIFICATION-TYPE
Threshold crossing alarms for B2.
1.3.6.1.4.1.25506.2.19.2.0.16current
hh3cPosB3TCAlarm
NOTIFICATION-TYPE
Threshold crossing alarms for B3.
1.3.6.1.4.1.25506.2.19.2.0.17current