HH3C-MPLS-LDP-MIB
- Registered at
- 1.3.6.1.4.1.25506.8.12.2
- Last updated
- 1999-06-30 12:00
- Organization
- New H3C Tech. Co., Ltd.
- Revisions
- 1996-11-08 21:55
- Namespace
- comware
- Source file
HH3C-MPLS-LDP-MIB- Digest
sha256:4b7b0a477c3204ebfa645785af12fc7b1c6c3191c5528662826cf14ca6b133cd
Description
All rights reserved
Contact
Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| HH3C-OID-MIB | hh3cMpls |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HH3C-MPLS-LDP-MIB HH3C-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AddressFamilyNumbers TEXTUAL-CONVENTION An address family. Values are defined in RFC 1700 - Assigned Numbers. All values may not be relevant in all contexts when used in this MIB, but are included for completeness. | current | |||
| AtmVcIdentifier TEXTUAL-CONVENTION The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB. | current | |||
| AtmVpIdentifier TEXTUAL-CONVENTION The VPI value for a VPL. The value VPI=0 is not used for a VPL not associated with a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 1 to 255. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. | current | |||
| BitRate type | ||||
| BurstSize type | ||||
| DisplayString type | ||||
| MplsLabel TEXTUAL-CONVENTION Represents an MPLS label. Note that the contents of a label field are interpreted in an interface-type specific fashion. For example, the label carried in the MPLS shim header is 20 bits wide and the top 12 bits must be zero. The frame relay label can be either 10, 17 or 23 bits wide depending on the size of the DLCI field size and the top 22, 15, or 9 bits must be zero, respectively. For an ATM interface, the lowermost 16 bits are interpreted as the VCI, the next 8 bits as the VPI and the remaining bits must be zero. Also note the permissible label values are also a function of the interface type. For example, the value 3 has special semantics in the control plane for an MPLS shim header label and is not a valid label value in the datapath. | current | |||
| MplsLdpGenAddr TEXTUAL-CONVENTION The value of an network layer or data link layer address. | current | |||
| MplsLdpIdentifier TEXTUAL-CONVENTION The LDP identifier is a six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR. | current | |||
| MplsLsrIdentifier TEXTUAL-CONVENTION The Label Switch Router (LSR) identifier is the first 4 bytes or the IP Address component of the Label Distribution Protocol (LDP) identifier. | current | |||
| MplsTunnelIndex TEXTUAL-CONVENTION Index into mplsTunnelTable. | current | |||
| PhysAddress type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hh3cMplsLdpObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.2.1 | |||
| hh3cMplsLdpLsrObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.2.1.1 | |||
| hh3cMplsLdpLsrIncarnTable OBJECT-TYPE MPLS provides support for multiple incarnations of the MPLS Stack in a target. The LSR defined in the standard <IETF DRAFT> MIB is treated as an incarnation in this MIB. Using a local policy the Network administrator must group the LDP Entities that should be placed in an incarnation. | 1.3.6.1.4.1.25506.8.12.2.1.1.1 | not-accessible | current | |
| hh3cMplsLdpLsrIncarnEntry OBJECT-TYPE An entry in this table represents an LSR incarnation. All the entries in this table are created initially when the LDP is initiated. The row status of each entry will be in 'notInService' state initially. The row status must be set to 'active' after the necessary configurations are complete with respect to an incarnation. Currenlty the LSR ID of the incarnation is the only mandatory parameter that must be set before the rowStatus is set to 'active'. An LSR Incarnation Entity is uniquely indexed by its Incarnation Identifier. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1 | not-accessible | current | |
| hh3cMplsLdpLsrID OBJECT-TYPE The LSR's Identifier. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.1 | MplsLsrIdentifier | read-write | current |
| hh3cMplsLdpLsrLoopDetectionPresent OBJECT-TYPE A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.2 | TruthValue | read-only | current |
| hh3cMplsLdpLsrLoopDetectionAdminStatus OBJECT-TYPE To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.3 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hh3cMplsLdpLsrPathVectorLimit OBJECT-TYPE This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it had traversed a loop. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.4 | INTEGER | read-write | current |
| hh3cMplsLdpLsrHopCountLimit OBJECT-TYPE This object only has meaning if hh3cMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it had traversed a loop. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.5 | INTEGER | read-write | current |
| hh3cMplsLdpLsrLoopPreventionPresent OBJECT-TYPE A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. Current release of MPLS does not provide support to assign this MIB object with a value 'true'. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.6 | TruthValue | read-only | current |
| hh3cMplsLdpLsrLoopPreventionAdminStatus OBJECT-TYPE To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of MPLS does not provide support to assign this MIB object with a value 'enabled'. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.7 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| hh3cMplsLdpLsrLabelRetentionMode OBJECT-TYPE The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used to forward packets, i.e. if label came from a valid next hop. If the value of this object is liberal(2) then all advertized label mappings are retained whether they are from a valid next hop or not. Current release of MPLS does not provide support to assign this MIB object with a value 'liberal'. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.8 | INTEGER {conservative(1), liberal(2)} | read-write | current |
| hh3cMplsLdpLsrIncarnID OBJECT-TYPE The incarnation acts as index to all the elements in this table. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.9 | INTEGER | read-only | current |
| hh3cMplsLdpLsrMaxLdpEntities OBJECT-TYPE The maximum number of LDP entities that can be supported by this Incarnation. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.10 | INTEGER (1..1024) | read-write | current |
| hh3cMplsLdpLsrMaxLocalPeers OBJECT-TYPE The maximum number of Local LDP peers that can be supported by this Incarnation. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.11 | INTEGER (1..1024) | read-write | current |
| hh3cMplsLdpLsrMaxRemotePeers OBJECT-TYPE The maximum number of Remote LDP peers that can be supported by this Incarnation. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.12 | INTEGER (1..1024) | read-write | current |
| hh3cMplsLdpLsrMaxIfaces OBJECT-TYPE The maximum number of Label enabled Interfaces that can be supported by this Incarnation. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.13 | INTEGER | read-write | current |
| hh3cMplsLdpLsrMaxLsps OBJECT-TYPE The maximum number of Label Switched Paths that can be supported by this Incarnation. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.14 | INTEGER | read-write | current |
| hh3cMplsLdpLsrMaxCrlspTnls OBJECT-TYPE The maximum number of CRLSPs that can be supported by this Incarnation. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.15 | INTEGER | read-write | current |
| hh3cMplsLdpLsrMaxErhopPerCrlspTnl OBJECT-TYPE The maximum number of ER-Hops that can be supported in a CRLSP tunnel. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.16 | INTEGER | read-write | current |
| hh3cMplsLdpLsrRowStatus OBJECT-TYPE An object that allows entries in this table to be created and deleted using the RowStatus convention. | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.17 | RowStatus | read-create | current |
| hh3cMplsLdpLsrMaxVcmCapability OBJECT-TYPE | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.18 | INTEGER | read-write | current |
| hh3cMplsLdpLsrVcmPathVecInAllLblMapPresent OBJECT-TYPE | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.19 | TruthValue | read-write | current |
| hh3cMplsLdpLsrRequestRetrytimerValue OBJECT-TYPE | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.20 | INTEGER | read-write | current |
| hh3cMplsLdpLsrNumOfRequestRetryAttempts OBJECT-TYPE | 1.3.6.1.4.1.25506.8.12.2.1.1.1.1.21 | INTEGER | read-write | current |
| hh3cMplsLdpEntityObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.2.1.2 | |||
| hh3cMplsLdpEntityTable OBJECT-TYPE This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR). | 1.3.6.1.4.1.25506.8.12.2.1.2.1 | not-accessible | current | |
| hh3cMplsLdpEntityEntry OBJECT-TYPE An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An LPD Entity is uniquely indexed by its LPD Identifier. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1 | not-accessible | current | |
| hh3cMplsLdpEntityID OBJECT-TYPE The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.1 | MplsLdpIdentifier | accessible-for-notify | current |
| hh3cMplsLdpEntityLabelSpaceType OBJECT-TYPE The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type of label space is tied to an interface. 'perPlatform(3)' The type of label space is tied to the platform. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.2 | INTEGER {unknown(1), perInterface(2), perPlatform(3)} | read-create | current |
| hh3cMplsLdpEntityDefVpi OBJECT-TYPE The Default VPI value used in the label for the default VPI. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.3 | AtmVpIdentifier | read-create | current |
| hh3cMplsLdpEntityDefVci OBJECT-TYPE The Default VCI value used in the label for the default VCI. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.4 | AtmVcIdentifier | read-create | current |
| hh3cMplsLdpEntityUnlabTrafVpi OBJECT-TYPE VPI value of the VCC supporting unlabeled traffic. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.5 | AtmVpIdentifier | read-create | current |
| hh3cMplsLdpEntityUnlabTrafVci OBJECT-TYPE VCI value of the VCC supporting unlabeled traffic. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.6 | AtmVcIdentifier | read-create | current |
| hh3cMplsLdpEntityMergeCapability OBJECT-TYPE Sets the merge capability for this LDP entity. Current Release of MPLS does not provide support for any kind of Merge. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.7 | INTEGER {noMerge(0), vpMerge(1), vcMerge(2), vpVcMerge(3)} | read-create | current |
| hh3cMplsLdpEntityVcDirectionality OBJECT-TYPE Sets the VC directionality for this LDP entity. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.8 | INTEGER {bidirectional(1), unidirectional(2)} | read-create | current |
| hh3cMplsLdpEntityWellKnownDiscoveryPort OBJECT-TYPE The well known LDP Discovery Port. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.9 | INTEGER | read-create | current |
| hh3cMplsLdpEntityMtu OBJECT-TYPE The maximum transmission unit (MTU) that was configured for this entity. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.10 | INTEGER (0..65535) | read-create | current |
| hh3cMplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE The two octet value which is the proposed keep alive hold timer for this LDP Entity. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.11 | INTEGER (1..65535) | read-create | current |
| hh3cMplsLdpEntityFailedInitSessionThreshold OBJECT-TYPE When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero). | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.12 | INTEGER | read-create | current |
| hh3cMplsLdpEntityLabelDistributionMethod OBJECT-TYPE For any given LDP session, the method of label distribution must be specified. Current release of MPLS does not provide support for 'downstreamUnsolicited'. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.13 | INTEGER {downstreamOnDemand(1), downstreamUnsolicited(2)} | read-create | current |
| hh3cMplsLdpEntityLabelAllocationMethod OBJECT-TYPE For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.14 | INTEGER {ordered(1), independent(2)} | read-create | current |
| hh3cMplsLdpEntityHelloHoldTimer OBJECT-TYPE The two octet value which is the proposed hello hold timer for this LDP Entity. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.15 | INTEGER (1..65535) | read-create | current |
| hh3cMplsLdpEntityRowStatus OBJECT-TYPE An object that allows entries in this table to be created and deleted using the RowStatus convention. | 1.3.6.1.4.1.25506.8.12.2.1.2.1.1.16 | RowStatus | read-create | current |
| hh3cMplsLdpEntityIfTable OBJECT-TYPE This table contains information about the interfaces that are associated with an LDP Entity. There should be atleast one interface associated with each LDP Entity. If the LDP Entity supports 'per interface based label space' label type then, atmost one interface can be associated with the LDP entity. If the LDP Entity supports 'per platform based label space' label type then, more than one interface can be associated with the LDP Entity. | 1.3.6.1.4.1.25506.8.12.2.1.2.2 | not-accessible | current | |
| hh3cMplsLdpEntityIfEntry OBJECT-TYPE An entry in this table represents an Interface that is associated with a LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An interface (row in this table) can be created/deleted only when the associted LDP Entity row status has the value notInService or notReady. | 1.3.6.1.4.1.25506.8.12.2.1.2.2.1 | not-accessible | current | |
| hh3cMplsLdpEntityIfIndex OBJECT-TYPE Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II | 1.3.6.1.4.1.25506.8.12.2.1.2.2.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| hh3cMplsLdpEntityIfIpv4Address OBJECT-TYPE The IPv4 address associated with the interface. | 1.3.6.1.4.1.25506.8.12.2.1.2.2.1.2 | IpAddress | read-create | current |
| hh3cMplsLdpEntityIfRowStatus OBJECT-TYPE An object that allows entries in this table to be created and deleted using the RowStatus convention. | 1.3.6.1.4.1.25506.8.12.2.1.2.2.1.3 | RowStatus | read-create | current |
| hh3cMplsLdpEntityConfAtmLabelRangeTable OBJECT-TYPE The MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table. | 1.3.6.1.4.1.25506.8.12.2.1.2.3 | not-accessible | current | |
| hh3cMplsLdpEntityConfAtmLabelRangeEntry OBJECT-TYPE A row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityID and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table. | 1.3.6.1.4.1.25506.8.12.2.1.2.3.1 | not-accessible | current | |
| hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVPI OBJECT-TYPE The minimum VPI number configured for this range. | 1.3.6.1.4.1.25506.8.12.2.1.2.3.1.1 | AtmVpIdentifier | not-accessible | current |
| hh3cMplsLdpEntityConfAtmLabelRangeLowerBoundVCI OBJECT-TYPE The minimum VCI number configured for this range. | 1.3.6.1.4.1.25506.8.12.2.1.2.3.1.2 | AtmVcIdentifier | not-accessible | current |
| hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVPI OBJECT-TYPE The maximum VPI number configured for this range. | 1.3.6.1.4.1.25506.8.12.2.1.2.3.1.3 | AtmVpIdentifier | read-create | current |
| hh3cMplsLdpEntityConfAtmLabelRangeUpperBoundVCI OBJECT-TYPE The maximum VCI number configured for this range. | 1.3.6.1.4.1.25506.8.12.2.1.2.3.1.4 | AtmVcIdentifier | read-create | current |
| hh3cMplsLdpEntityConfAtmLabelRangeRowStatus OBJECT-TYPE An object that allows entries in this table to be created and deleted using the RowStatus convention. | 1.3.6.1.4.1.25506.8.12.2.1.2.3.1.5 | RowStatus | read-create | current |
| hh3cMplsLdpEntityStatsTable OBJECT-TYPE This table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR. | 1.3.6.1.4.1.25506.8.12.2.1.2.4 | not-accessible | current | |
| hh3cMplsLdpEntityStatsEntry OBJECT-TYPE A row in this table contains statistical information about an LDP Entity. | 1.3.6.1.4.1.25506.8.12.2.1.2.4.1 | not-accessible | current | |
| hh3cMplsLdpAttemptedSessions OBJECT-TYPE A count of the total attempted sessions for this LDP Entity. | 1.3.6.1.4.1.25506.8.12.2.1.2.4.1.1 | Counter32 | read-only | current |
| hh3cMplsLdpPeerObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.2.1.3 | |||
| hh3cMplsLdpPeerTable OBJECT-TYPE Information about LDP peers which have been discovered by the LDP Entities that are managed by this agent. | 1.3.6.1.4.1.25506.8.12.2.1.3.1 | not-accessible | current | |
| hh3cMplsLdpPeerEntry OBJECT-TYPE Information about a single Peer. | 1.3.6.1.4.1.25506.8.12.2.1.3.1.1 | not-accessible | current | |
| hh3cMplsLdpPeerIndex OBJECT-TYPE An identifier for the LDP peer that is unique within the scope of this agent. | 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| hh3cMplsLdpPeerID OBJECT-TYPE The LDP identifier of this LDP Peer. | 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.2 | MplsLdpIdentifier | read-create | current |
| hh3cMplsLdpPeerInternetworkAddrType OBJECT-TYPE The type of the internetwork layer address of this LDP peer. This object indicates how the value of hh3cMplsLdpPeerInternetworkAddr is to be interpreted. | 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.3 | AddressFamilyNumbers | read-create | current |
| hh3cMplsLdpPeerInternetworkAddr OBJECT-TYPE The value of the internetwork layer address of this LDP peer. | 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.4 | MplsLdpGenAddr | read-create | current |
| hh3cMplsLdpPeerDefaultMtu OBJECT-TYPE The default maximum transmission unit (MTU) of the LDP Peer. | 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.5 | INTEGER (0..65535) | read-create | current |
| hh3cMplsLdpPeerKeepAliveHoldTimer OBJECT-TYPE The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval. | 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.6 | INTEGER (1..65535) | read-create | current |
| hh3cMplsLdpPeerLabelDistributionMethod OBJECT-TYPE For any given LDP session, the method of label distribution must be specified. | 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.7 | INTEGER {downstreamOnDemand(1), downstreamUnsolicited(2)} | read-create | current |
| hh3cMplsLdpPeerType OBJECT-TYPE Indicates whether a peer is a local peer or a remote peer | 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.8 | INTEGER {local(1), remote(2)} | read-create | current |
| hh3cMplsLdpPeerRowStatus OBJECT-TYPE An object that allows entries in this table to be created and deleted using the RowStatus convention. | 1.3.6.1.4.1.25506.8.12.2.1.3.1.1.9 | RowStatus | read-create | current |
| hh3cMplsLdpPeerConfAtmLabelRangeTable OBJECT-TYPE The MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table. | 1.3.6.1.4.1.25506.8.12.2.1.3.2 | not-accessible | current | |
| hh3cMplsLdpPeerConfAtmLabelRangeEntry OBJECT-TYPE A row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table. | 1.3.6.1.4.1.25506.8.12.2.1.3.2.1 | not-accessible | current | |
| hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVPI OBJECT-TYPE The minimum VPI number configured for this range. | 1.3.6.1.4.1.25506.8.12.2.1.3.2.1.1 | AtmVpIdentifier | not-accessible | current |
| hh3cMplsLdpPeerConfAtmLabelRangeLowerBoundVCI OBJECT-TYPE The minimum VCI number configured for this range. | 1.3.6.1.4.1.25506.8.12.2.1.3.2.1.2 | AtmVcIdentifier | not-accessible | current |
| hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVPI OBJECT-TYPE The maximum VPI number configured for this range. | 1.3.6.1.4.1.25506.8.12.2.1.3.2.1.3 | AtmVpIdentifier | read-only | current |
| hh3cMplsLdpPeerConfAtmLabelRangeUpperBoundVCI OBJECT-TYPE The maximum VCI number configured for this range. | 1.3.6.1.4.1.25506.8.12.2.1.3.2.1.4 | AtmVcIdentifier | read-only | current |
| hh3cMplsLdpSessionObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.2.1.4 | |||
| hh3cMplsLdpSessionTable OBJECT-TYPE A table of Sessions between the LDP Entities and LDP Peers. | 1.3.6.1.4.1.25506.8.12.2.1.4.1 | not-accessible | current | |
| hh3cMplsLdpSessionEntry OBJECT-TYPE An entry in this table represents information on a single session between an LDP Entity and LDP Peer. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1 | not-accessible | current | |
| hh3cMplsLdpSessionIndex OBJECT-TYPE An unique identifier for this entry such that it identifies a specific LDP Session. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| hh3cMplsLdpSessionID OBJECT-TYPE The LDP Session identifier. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.2 | MplsLdpIdentifier | read-only | current |
| hh3cMplsLdpSessionProtocolVersion OBJECT-TYPE The version of the LDP Protocol which this session is using. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.3 | INTEGER (0..65535) | read-only | current |
| hh3cMplsLdpSessionKeepAliveHoldTimeRemaining OBJECT-TYPE The keep alive hold time remaining for this session. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.4 | TimeInterval | read-only | current |
| hh3cMplsLdpSessionRole OBJECT-TYPE An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.5 | INTEGER {active(1), passive(2)} | read-only | current |
| hh3cMplsLdpSessionState OBJECT-TYPE The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.6 | INTEGER {nonexistent(1), initialized(2), openrec(3), opensent(4), operational(5)} | read-only | current |
| hh3cMplsLdpSessionAtmLabelRangeLowerBoundVPI OBJECT-TYPE The minimum VPI number for this range. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.7 | AtmVpIdentifier | read-only | current |
| hh3cMplsLdpSessionAtmLabelRangeLowerBoundVCI OBJECT-TYPE The minimum VCI number for this range. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.8 | AtmVcIdentifier | read-only | current |
| hh3cMplsLdpSessionAtmLabelRangeUpperBoundVPI OBJECT-TYPE The maximum VPI number for this range. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.9 | AtmVpIdentifier | read-only | current |
| hh3cMplsLdpSessionAtmLabelRangeUpperBoundVCI OBJECT-TYPE The maximum VCI number for this range. | 1.3.6.1.4.1.25506.8.12.2.1.4.1.1.10 | AtmVcIdentifier | read-only | current |
| hh3cMplsLdpHelloAdjacencyObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.2.1.5 | |||
| hh3cMplsLdpHelloAdjacencyTable OBJECT-TYPE A table of Hello Adjacencies for Sessions. | 1.3.6.1.4.1.25506.8.12.2.1.5.1 | not-accessible | current | |
| hh3cMplsLdpHelloAdjacencyEntry OBJECT-TYPE Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies. | 1.3.6.1.4.1.25506.8.12.2.1.5.1.1 | not-accessible | current | |
| hh3cMplsLdpHelloAdjacencyIndex OBJECT-TYPE An identifier for the adjacency. | 1.3.6.1.4.1.25506.8.12.2.1.5.1.1.1 | Unsigned32 (1..4294967295) | not-accessible | current |
| hh3cMplsLdpHelloAdjacencyHoldTimeRemaining OBJECT-TYPE The time remaining for this Hello Adjacency. | 1.3.6.1.4.1.25506.8.12.2.1.5.1.1.2 | TimeInterval | read-only | current |
| hh3cMplsLdpCrlspTnlObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.2.1.6 | |||
| hh3cMplsLdpCrlspTnlTable OBJECT-TYPE The hh3cMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels to be created. The ER hops associated with a CRLSP tunnel are to be configured using the hh3cMplsLdpCrlspErHopTable. | 1.3.6.1.4.1.25506.8.12.2.1.6.1 | not-accessible | current | |
| hh3cMplsLdpCrlspTnlEntry OBJECT-TYPE An entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1 | not-accessible | current | |
| hh3cMplsLdpCrlspTnlIndex OBJECT-TYPE Uniquely identifies this row. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.1 | MplsTunnelIndex | accessible-for-notify | current |
| hh3cMplsLdpCrlspTnlName OBJECT-TYPE The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.2 | DisplayString | read-create | current |
| hh3cMplsLdpCrlspTnlDirection OBJECT-TYPE Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.3 | INTEGER {in(1), out(2), inOut(3)} | read-create | current |
| hh3cMplsLdpCrlspTnlSignallingProto OBJECT-TYPE The signaling protocol, if any, that set up this tunnel. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.4 | INTEGER {none(1), ldp(2), rsvp(3)} | read-create | current |
| hh3cMplsLdpCrlspTnlSetupPrio OBJECT-TYPE The setup priority of this tunnel. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.5 | INTEGER (0..7) | read-create | current |
| hh3cMplsLdpCrlspTnlHoldingPrio OBJECT-TYPE The holding priority for this tunnel. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.6 | INTEGER (0..7) | read-create | current |
| hh3cMplsLdpCrlspTnlPeakDataRate OBJECT-TYPE The peak rate - the maximum rate at which traffic will be sent on the CRLSP. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.7 | BitRate | read-create | current |
| hh3cMplsLdpCrlspTnlPeakBurstSize OBJECT-TYPE The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.8 | BurstSize | read-create | current |
| hh3cMplsLdpCrlspTnlCommittedDataRate OBJECT-TYPE The committed rate - the committed rate at which traffic will be sent on the CRLSP. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.9 | BitRate | read-create | current |
| hh3cMplsLdpCrlspTnlCommittedBurstSize OBJECT-TYPE The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.10 | BurstSize | read-create | current |
| hh3cMplsLdpCrlspTnlExcessBurstSize OBJECT-TYPE The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.11 | BurstSize | read-create | current |
| hh3cMplsLdpCrlspTnlIsPinned OBJECT-TYPE Indicates whether the loose-routed hops of this tunnel are to be pinned. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.12 | TruthValue | read-create | current |
| hh3cMplsLdpCrlspTnlFrequency OBJECT-TYPE Indicates the frequency of usage of the established CRLSP. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.13 | INTEGER (0..2) | read-create | current |
| hh3cMplsLdpCrlspTnlWeight OBJECT-TYPE Indicates the weight that is the established CRLSP. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.14 | INTEGER (0..255) | read-create | current |
| hh3cMplsLdpCrlspTnlRowStatus OBJECT-TYPE For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hh3cMplsLdpErHopTable, associated with this tunnel. | 1.3.6.1.4.1.25506.8.12.2.1.6.1.1.15 | RowStatus | read-create | current |
| hh3cMplsLdpCrlspErHopTable OBJECT-TYPE The hh3cMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hh3cMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hh3cMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel. | 1.3.6.1.4.1.25506.8.12.2.1.6.2 | not-accessible | current | |
| hh3cMplsLdpCrlspErHopEntry OBJECT-TYPE An entry in this table represents a tunnel hop. An entry is created by a network administrator for signalled ERLSP set up by LDP or RSVP. | 1.3.6.1.4.1.25506.8.12.2.1.6.2.1 | not-accessible | current | |
| hh3cMplsLdpCrlspErHopIndex OBJECT-TYPE Secondary index into this table identifying the particular hop. | 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.1 | INTEGER | not-accessible | current |
| hh3cMplsLdpCrlspErHopAddrType OBJECT-TYPE Address type of this hop. | 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.2 | INTEGER {ipV4(1)} | read-create | current |
| hh3cMplsLdpCrlspErHopIpv4Addr OBJECT-TYPE If hh3cMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0. | 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.3 | IpAddress | read-create | current |
| hh3cMplsLdpCrlspErHopIpv4PrefixLen OBJECT-TYPE If hh3cMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0. | 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.4 | INTEGER (1..32) | read-create | current |
| hh3cMplsLdpCrlspErHopStrictOrLoose OBJECT-TYPE Whether this is a strict or loose hop. | 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.5 | INTEGER {strict(1), loose(2)} | read-create | current |
| hh3cMplsLdpCrlspErHopRowStatus OBJECT-TYPE For creating, modifying and deleting this row. | 1.3.6.1.4.1.25506.8.12.2.1.6.2.1.6 | RowStatus | read-create | current |
| hh3cMplsLdpNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.2.2 | |||
| hh3cMplsLdpNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.2.2.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| hh3cMplsLdpFailedInitSessionThresholdExceeded NOTIFICATION-TYPE This notification is generated whenever the value of hh3cMplsLdpEntityFailedInitSessionThreshold is exceeded. | 1.3.6.1.4.1.25506.8.12.2.2.0.1 | current |
| hh3cMplsLdpCrlspTunnelUp NOTIFICATION-TYPE This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Label mapping message from the downstream LSR for the LAbel request sent for the CRLSP tunnel. | 1.3.6.1.4.1.25506.8.12.2.2.0.2 | current |
| hh3cMplsLdpCrlspTunnelDown NOTIFICATION-TYPE This notification is generated when a CRLSP Row status is modified to destroy the CRLSP tunnel. - due to pre-emption etc., | 1.3.6.1.4.1.25506.8.12.2.2.0.3 | current |
| hh3cMplsLdpCrlspTunnelSetupFailure NOTIFICATION-TYPE This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Nak message from the downstream LSR for the Label request sent for the CRLSP tunnel. This can occur due to improper ER hop values being set, or Traffic resources not available etc., | 1.3.6.1.4.1.25506.8.12.2.2.0.4 | current |
| hh3cMplsLdpIncarnUpEventFailure NOTIFICATION-TYPE This notification is generated by LDP to notify the Incarnation UP Event failure | 1.3.6.1.4.1.25506.8.12.2.2.0.11 | current |
| hh3cMplsLdpIncarnDownEventFailure NOTIFICATION-TYPE This notification is generated by LDP to notify the Incarnation DOWN Event failure | 1.3.6.1.4.1.25506.8.12.2.2.0.12 | current |
| hh3cMplsLdpEntityUpEventFailure NOTIFICATION-TYPE This notification is generated by LDP to notify the ENTITY UP Event failure | 1.3.6.1.4.1.25506.8.12.2.2.0.13 | current |
| hh3cMplsLdpEntityDownEventFailure NOTIFICATION-TYPE This notification is generated by LDP to notify the ENTITY DOWN Event failure | 1.3.6.1.4.1.25506.8.12.2.2.0.14 | current |
| hh3cMplsLdpSessionUpEventFailure NOTIFICATION-TYPE Generation of this trap occurs when the value of 'hh3cMplsLdpSessionState' enters the 'operational(5)' state. | 1.3.6.1.4.1.25506.8.12.2.2.0.15 | current |
| hh3cMplsLdpSessionDownEventFailure NOTIFICATION-TYPE Generation of this trap occurs when the value of 'hh3cMplsLdpSessionState' leaves the 'operational(5)' state. | 1.3.6.1.4.1.25506.8.12.2.2.0.16 | current |