HH3C-MPLS-BGP-VPN-MIB
- Registered at
- 1.3.6.1.4.1.25506.8.12.3
- Last updated
- 2001-07-20 12:00
- Organization
- New H3C Tech. Co., Ltd.
- Revisions
- 2001-07-20 12:00, 2001-07-17 12:00, 2001-07-10 12:00, 2001-06-19 12:00, 2001-05-30 12:00, 2000-09-30 12:00
- Namespace
- comware
- Source file
HH3C-MPLS-BGP-VPN-MIB- Digest
sha256:ffab8ee234a62d58006efcbea9a9ec79dc745bd8814753df7b9c7b254eb3aa68
Description
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft <draft-ietf-mpls-arch-06.txt>, August 1999.
Contact
Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| HH3C-OID-MIB | hh3cMpls |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, experimental, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HH3C-MPLS-BGP-VPN-MIB HH3C-OID-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| Hh3cMplsVpnId TEXTUAL-CONVENTION An identifier that is assigned to each MPLS/BGP VPN and is used to uniquely identify it. This is assigned by the system operator or NMS and SHOULD be unique throughout the MPLS domain. If this is the case, then this identifier can then be used at any LSR within a specific MPLS domain to identify this MPLS/BGP VPN. It may also be possible to preserve the uniqueness of this identifier across MPLS domain boundaries, in which case this identifier can then be used to uniquely identify MPLS/BGP VPNs on a more global basis. | current | |||
| Hh3cMplsVpnRouteDistinguisher TEXTUAL-CONVENTION Syntax for a route distinguisher and route target. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hh3cmplsVpnObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.3.1 | |||
| hh3cmplsVpnScalars OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.3.1.1 | |||
| hh3cmplsVpnConfiguredVrfs OBJECT-TYPE The number of VRFs which are configured on this node. | 1.3.6.1.4.1.25506.8.12.3.1.1.1 | Unsigned32 | read-only | current |
| hh3cmplsVpnActiveVrfs OBJECT-TYPE The number of VRFs which are active on this node. That is, those whose operStatus = Up (1). | 1.3.6.1.4.1.25506.8.12.3.1.1.2 | Unsigned32 | read-only | current |
| hh3cmplsVpnConf OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.3.1.2 | |||
| hh3cmplsVpnInterfaceConfTable OBJECT-TYPE This table specifies per-interface MPLS capability and associated information. | 1.3.6.1.4.1.25506.8.12.3.1.2.1 | not-accessible | current | |
| hh3cmplsVpnInterfaceConfEntry OBJECT-TYPE An entry in this table is created by an LSR for every interface capable of supporting MPLS/BGP VPN. Each entry in this table is meant to correspond to an entry in the Interfaces Table. | 1.3.6.1.4.1.25506.8.12.3.1.2.1.1 | not-accessible | current | |
| hh3cmplsVpnInterfaceConfIndex OBJECT-TYPE This is a unique index for an entry in the hh3cmplsVpnInterfaceConfTable. | 1.3.6.1.4.1.25506.8.12.3.1.2.1.1.1 | InterfaceIndex | read-only | current |
| hh3cmplsVpnInterfaceLabelEdgeType OBJECT-TYPE Either the providerEdge(1) (PE) or customerEdge(2) (CE) bit MUST be set. | 1.3.6.1.4.1.25506.8.12.3.1.2.1.1.2 | INTEGER {providerEdge(1), customerEdge(2)} | read-only | current |
| hh3cmplsVpnInterfaceVpnClassification OBJECT-TYPE Denotes whether this link participates in a carrier-of-carrier's, enterprise, or inter-provider scenario. | 1.3.6.1.4.1.25506.8.12.3.1.2.1.1.3 | INTEGER {carrierOfCarrier(1), enterprise(2), interProvider(3)} | read-only | current |
| hh3cmplsVpnInterfaceIpAddress OBJECT-TYPE The IP address of this interface. | 1.3.6.1.4.1.25506.8.12.3.1.2.1.1.4 | InetAddress | read-create | current |
| hh3cmplsVpnInterfaceIpAddressMask OBJECT-TYPE The IP address mask of this interface. | 1.3.6.1.4.1.25506.8.12.3.1.2.1.1.5 | InetAddress | read-create | current |
| hh3cmplsVpnInterfaceConfRowStatus OBJECT-TYPE The row status for this entry. This value is used to create a row in this table, signifying that the specified interface is to be associated with the specified interface. If this operation suceeds, the interface will have been associated, otherwise the agent would not allow the association. If the agent only allows read-only operations on this table, it will create entries in this table as they are created. | 1.3.6.1.4.1.25506.8.12.3.1.2.1.1.6 | RowStatus | read-create | current |
| hh3cmplsVpnVrfConfTable OBJECT-TYPE This table specifies per-interface MPLS/BGP VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated with MPLS/VPN interfaces. Note that multiple interfaces can belong to the same VRF instance. The collection of all VRF instances comprises an actual VPN. | 1.3.6.1.4.1.25506.8.12.3.1.2.2 | not-accessible | current | |
| hh3cmplsVpnVrfConfEntry OBJECT-TYPE An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1 | not-accessible | current | |
| hh3cmplsVpnVrfName OBJECT-TYPE The human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.1 | Hh3cMplsVpnId | read-only | current |
| hh3cmplsVpnVrfRouteDistinguisher OBJECT-TYPE The route distinguisher for this VRF. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.2 | Hh3cMplsVpnRouteDistinguisher | read-create | current |
| hh3cmplsVpnVrfNetPrefixType OBJECT-TYPE Denotes the type network prefix in use for the PE-CE connections. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.3 | INTEGER {other(1), rip(2), ospf(3), isis(4), bgp(5), static(6)} | read-only | current |
| hh3cmplsVpnVrfNetPrefix OBJECT-TYPE Denotes the network prefix for the PE-CE connections. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.4 | InetAddress | read-only | current |
| hh3cmplsVpnVrfIpRouteRedistributeConn OBJECT-TYPE Denotes the redistribution of directly connected networks into the VRF BGP table. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.5 | TruthValue | read-create | current |
| hh3cmplsVpnVrfIpRouteRedistributeStatic OBJECT-TYPE Denotes the redistribution of static routes into the VRF BGP table. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.6 | TruthValue | read-create | current |
| hh3cmplsVpnVrfIpRouteRedistributeRip OBJECT-TYPE Denotes the redistribution of rip routes into the VRF BGP table. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.7 | TruthValue | read-create | current |
| hh3cmplsVpnVrfConfHighRouteThreshold OBJECT-TYPE Denotes high-level water marker for the number of routes which this VRF may hold. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.8 | Unsigned32 | read-create | current |
| hh3cmplsVpnVrfConfIsWarnOnly OBJECT-TYPE Denotes the action when the amount of VPN's routes exceed the hh3cmplsVpnVrfConfHighRouteThreshold. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.9 | TruthValue | read-create | current |
| hh3cmplsVpnVrfConfMaxRoutes OBJECT-TYPE Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to hh3cmplsVrfMaxPossibleRoutes unless it is set to 0. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.10 | Unsigned32 | read-create | current |
| hh3cmplsVpnVrfConfRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. | 1.3.6.1.4.1.25506.8.12.3.1.2.2.1.11 | RowStatus | read-create | current |
| hh3cmplsVpnVrfRouteTargetTable OBJECT-TYPE This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN. | 1.3.6.1.4.1.25506.8.12.3.1.2.3 | not-accessible | current | |
| hh3cmplsVpnVrfRouteTargetEntry OBJECT-TYPE An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS/BGP VPN instance. The indexing provides an ordering per-VRF instance. | 1.3.6.1.4.1.25506.8.12.3.1.2.3.1 | not-accessible | current | |
| hh3cmplsVpnVrfRouteTarget OBJECT-TYPE The route target distribution policy. | 1.3.6.1.4.1.25506.8.12.3.1.2.3.1.1 | Hh3cMplsVpnRouteDistinguisher | read-only | current |
| hh3cmplsVpnVrfRouteTargetType OBJECT-TYPE The route target export distribution type. | 1.3.6.1.4.1.25506.8.12.3.1.2.3.1.2 | INTEGER {import(1), export(2)} | read-only | current |
| hh3cmplsVpnVrfRouteTargetRowStatus OBJECT-TYPE Row status for this entry. | 1.3.6.1.4.1.25506.8.12.3.1.2.3.1.3 | RowStatus | read-create | current |
| hh3cmplsVpnVrfBgpNbrAddrTable OBJECT-TYPE This table specifies per-interface MPLS/BGP neighbor addresses for both PEs and CEs. | 1.3.6.1.4.1.25506.8.12.3.1.2.4 | not-accessible | current | |
| hh3cmplsVpnVrfBgpNbrAddrEntry OBJECT-TYPE An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. | 1.3.6.1.4.1.25506.8.12.3.1.2.4.1 | not-accessible | current | |
| hh3cmplsVpnVrfBgpNbrAddr OBJECT-TYPE Denotes the BGP neighbor address. | 1.3.6.1.4.1.25506.8.12.3.1.2.4.1.1 | InetAddress | read-only | current |
| hh3cmplsVpnVrfBgpNbrRole OBJECT-TYPE Denotes the role played by this BGP neighbor with respect to this VRF. | 1.3.6.1.4.1.25506.8.12.3.1.2.4.1.2 | INTEGER {ce(1), pe(2)} | read-create | current |
| hh3cmplsVpnVrfBgpNbrType OBJECT-TYPE Denotes the address family of the PE address. | 1.3.6.1.4.1.25506.8.12.3.1.2.4.1.3 | InetAddressType | read-create | current |
| hh3cmplsVpnVrfBgpNbrAsNumber OBJECT-TYPE The Automonous System that the BGP's neighbour in. | 1.3.6.1.4.1.25506.8.12.3.1.2.4.1.4 | Unsigned32 | read-create | current |
| hh3cmplsVpnVrfBgpNbrAdminStatus OBJECT-TYPE The action set by SNMP client. | 1.3.6.1.4.1.25506.8.12.3.1.2.4.1.5 | INTEGER {mplsVpnVrfBgpNbrSetUp(1), mplsVpnVrfBgpNbrSetDown(2)} | read-create | current |
| hh3cmplsVpnVrfBgpNbrRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. | 1.3.6.1.4.1.25506.8.12.3.1.2.4.1.6 | RowStatus | read-create | current |
| hh3cmplsVpnRoute OBJECT-IDENTITY | 1.3.6.1.4.1.25506.8.12.3.1.3 | |||
| hh3cmplsVpnVrfRouteTable OBJECT-TYPE This table specifies per-interface MPLS/BGP VPN VRF Table routing information. Entries in this table define VRF routing entries associated with the specified MPLS/VPN interfaces. Note that this table contains both BGP and IGP routes, as both may appear in the same VRF. | 1.3.6.1.4.1.25506.8.12.3.1.3.1 | not-accessible | current | |
| hh3cmplsVpnVrfRouteEntry OBJECT-TYPE An entry in this table is created by an LSR for every route present configured (either dynamically or statically) within the context of a specific VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. | 1.3.6.1.4.1.25506.8.12.3.1.3.1.1 | not-accessible | current | |
| hh3cmplsVpnVrfRouteDest OBJECT-TYPE The destination IP address of this route. This object may not take a Multicast (Class D) address value. | 1.3.6.1.4.1.25506.8.12.3.1.3.1.1.1 | InetAddress | read-only | current |
| hh3cmplsVpnVrfRouteMask OBJECT-TYPE Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the hh3cmplsVpnVrfRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the hh3cmplsVpnVrfRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bit-wise logical-AND of x with the value of the corresponding instance of the hh3cmplsVpnVrfRouteDest object is not equal to hh3cmplsVpnVrfRouteDest. | 1.3.6.1.4.1.25506.8.12.3.1.3.1.1.2 | InetAddress | read-create | current |
| hh3cmplsVpnVrfRouteNextHop OBJECT-TYPE On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. . | 1.3.6.1.4.1.25506.8.12.3.1.3.1.1.3 | InetAddress | read-only | current |
| hh3cmplsVpnVrfRouteIfIndex OBJECT-TYPE The ifIndex value that identifies the local interface through which the next hop of this route should be reached. | 1.3.6.1.4.1.25506.8.12.3.1.3.1.1.4 | InterfaceIndex | read-create | current |
| hh3cmplsVpnVrfRouteProto OBJECT-TYPE The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols. | 1.3.6.1.4.1.25506.8.12.3.1.3.1.1.5 | INTEGER {other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isIs(9), esIs(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), idpr(15), ciscoEigrp(16)} | read-create | current |
| hh3cmplsVpnVrfRouteRowStatus OBJECT-TYPE Row status for this table. It is used according to row installation and removal conventions. | 1.3.6.1.4.1.25506.8.12.3.1.3.1.1.6 | RowStatus | read-create | current |