HH3C-LI-MIB
- Registered at
- 1.3.6.1.4.1.25506.2.111
- Last updated
- 2009-08-25 10:00
- Organization
- New H3C Tech. Co., Ltd.
- Revisions
- 2009-08-25 10:00
- Namespace
- comware
- Source file
HH3C-LI-MIB- Digest
sha256:746ef28bcad08bebdd2ede96ef6ed89c373fda866390820b68ba5438f4c88d62
Description
Lawful Interception MIB
Contact
Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| HH3C-OID-MIB | hh3cCommon |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType, InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HH3C-LI-MIB HH3C-OID-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hh3cLICommon OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.1 | |||
| hh3cLITrapBindObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.1.1 | |||
| hh3cLIBoardInformation OBJECT-TYPE It is a slot number. | 1.3.6.1.4.1.25506.2.111.1.1.1 | Unsigned32 | accessible-for-notify | current |
| hh3cLINotifications OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.1.2 | |||
| hh3cLINotificationsPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.1.2.0 | |||
| hh3cLIObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.1.3 | |||
| hh3cLINewIndex OBJECT-TYPE This object will be used as an index value for a new hh3cLIMediationEntry. Whenever read, the agent will give a non-used value. This is to reduce the probability of conflict during creation of new hh3cLIMediationTable entries. | 1.3.6.1.4.1.25506.2.111.1.3.1 | Integer32 (1..2147483647) | read-only | current |
| hh3cLIMediationTable OBJECT-TYPE This table describes interception gateway information with which interception device communicates. | 1.3.6.1.4.1.25506.2.111.1.3.2 | not-accessible | current | |
| hh3cLIMediationEntry OBJECT-TYPE An entry of configuring mediation device. | 1.3.6.1.4.1.25506.2.111.1.3.2.1 | not-accessible | current | |
| hh3cLIMediationIndex OBJECT-TYPE hh3cLIMediationIndex is a entry identifier. The Mediation Device should be responsible for making sure these are unique. Before creating a new entry, a value for this variable may be obtained by reading hh3cLINewIndex to reduce the probability of a value collision. | 1.3.6.1.4.1.25506.2.111.1.3.2.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| hh3cLIMediationDestAddrType OBJECT-TYPE The type of hh3cLIMediationDestAddr. | 1.3.6.1.4.1.25506.2.111.1.3.2.1.2 | InetAddressType | read-write | current |
| hh3cLIMediationDestAddr OBJECT-TYPE The IP Address of the Mediation Device to receive intercepted traffic. | 1.3.6.1.4.1.25506.2.111.1.3.2.1.3 | InetAddress | read-write | current |
| hh3cLIMediationDestPort OBJECT-TYPE The L4-port number on the Mediation Device to receive intercepted traffic. | 1.3.6.1.4.1.25506.2.111.1.3.2.1.4 | InetPortNumber | read-write | current |
| hh3cLIMediationSrcInterface OBJECT-TYPE The interface on the intercepting device from which to transmit intercepted data. If zero, intercepting device will select an outbound interface according to hh3cLIMediationDestAddr. | 1.3.6.1.4.1.25506.2.111.1.3.2.1.5 | InterfaceIndexOrZero | read-write | current |
| hh3cLIMediationDscp OBJECT-TYPE The Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic. | 1.3.6.1.4.1.25506.2.111.1.3.2.1.6 | Integer32 | read-write | current |
| hh3cLIMediationTimeOut OBJECT-TYPE The time at which this row and all related Stream Table rows should be automatically removed, and the intercept function expire. | 1.3.6.1.4.1.25506.2.111.1.3.2.1.7 | DateAndTime | read-write | current |
| hh3cLIMediationTransport OBJECT-TYPE The protocol used in transferring intercepted data to the Mediation Device. | 1.3.6.1.4.1.25506.2.111.1.3.2.1.8 | INTEGER {udp(1)} | read-write | current |
| hh3cLIMediationNotificationEnable OBJECT-TYPE This variable controls the generation of any notifications or informs by the MIB agent for this table entry. | 1.3.6.1.4.1.25506.2.111.1.3.2.1.9 | TruthValue | read-write | current |
| hh3cLIMediationRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.25506.2.111.1.3.2.1.10 | RowStatus | read-create | current |
| hh3cLIStreamTable OBJECT-TYPE This table lists the traffic stream's type to be intercepted. The specified filter is defined in hh3cLIIPStreamTable, hh3cLIMACStreamTable or hh3cLIUserStreamTable, according to hh3cLIStreamtype. Also it contains counters for packets to be intercepted and dropped by attached type of filter. | 1.3.6.1.4.1.25506.2.111.1.3.3 | not-accessible | current | |
| hh3cLIStreamEntry OBJECT-TYPE A single type of data stream to be intercepted. | 1.3.6.1.4.1.25506.2.111.1.3.3.1 | not-accessible | current | |
| hh3cLIStreamIndex OBJECT-TYPE The index of the stream entry. | 1.3.6.1.4.1.25506.2.111.1.3.3.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| hh3cLIStreamtype OBJECT-TYPE Identifies the type of stream, and according to it uses filter table. It can not be changed after a filter table is attached to it. The following types of streams are supported: ip: IP filter. The exact definition is a row in hh3cLIIPStreamTable. mac: MAC filter. The exact definition is a row in hh3cLIMACStreamTable. userConnecton: User connection filter. The exact definition is a row in hh3cLIUserStreamTable. | 1.3.6.1.4.1.25506.2.111.1.3.3.1.2 | INTEGER {ip(1), mac(2), userConnection(3)} | read-write | current |
| hh3cLIStreamEnable OBJECT-TYPE If 'true', the interception is active. And it is set to 'true' only after an additional filter specification has been attached to this stream. | 1.3.6.1.4.1.25506.2.111.1.3.3.1.3 | TruthValue | read-write | current |
| hh3cLIStreamPackets OBJECT-TYPE The numbers of packets that have been intercepted. | 1.3.6.1.4.1.25506.2.111.1.3.3.1.4 | Counter32 | read-only | current |
| hh3cLIStreamDrops OBJECT-TYPE The numbers of packets were dropped in the lawful intercept process. | 1.3.6.1.4.1.25506.2.111.1.3.3.1.5 | Counter32 | read-only | current |
| hh3cLIStreamHPackets OBJECT-TYPE The numbers of packets have been intercepted. This object is a 64-bit version of hh3cLIStreamPackets. | 1.3.6.1.4.1.25506.2.111.1.3.3.1.6 | Counter64 | read-only | current |
| hh3cLIStreamHDrops OBJECT-TYPE The numbers of packets were dropped in the lawful intercept process. This object is a 64-bit version of hh3cLIStreamDrops. | 1.3.6.1.4.1.25506.2.111.1.3.3.1.7 | Counter64 | read-only | current |
| hh3cLIStreamRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.25506.2.111.1.3.3.1.8 | RowStatus | read-create | current |
| hh3cLIIPStream OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.2 | |||
| hh3cLIIPStreamObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.2.1 | |||
| hh3cLIIPStreamTable OBJECT-TYPE This table lists the IPv4 and IPv6 streams to be intercepted. It is associated with hh3cLIMediationTable and hh3cLIStreamTable. | 1.3.6.1.4.1.25506.2.111.2.1.1 | not-accessible | current | |
| hh3cLIIPStreamEntry OBJECT-TYPE A single stream to be intercepted. The first index indicates the Mediation Device. The second index is that of the stream's counter entry in the hh3cLIStreamTable. The second index permits multiple classifiers to be used together, such as having an IP address as source or destination. | 1.3.6.1.4.1.25506.2.111.2.1.1.1 | not-accessible | current | |
| hh3cLIIPStreamInterface OBJECT-TYPE Traffic received or transmitted over this interface will be intercepted. This value must be set when creating a stream entry, either zero, or a valid interface index. If the value is zero, interception accepts any interface. Then at least one additional parameter must be selected, and not be default value. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.1 | InterfaceIndexOrZero | read-write | current |
| hh3cLIIPStreamAddrType OBJECT-TYPE The type of address, used in packet selection. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.2 | InetAddressType | read-write | current |
| hh3cLIIPStreamDestAddr OBJECT-TYPE The Destination address used in packet selection. This address will be consistent with the type specified in hh3cLIIPStreamAddrType. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.3 | InetAddress | read-write | current |
| hh3cLIIPStreamDestAddrLength OBJECT-TYPE The length of the Destination Prefix. A value of zero means all addresses to match. This prefix length will be consistent with the type specified in hh3cLIIPStreamAddrType. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.4 | InetAddressPrefixLength | read-write | current |
| hh3cLIIPStreamSrcAddr OBJECT-TYPE The Source Address used in packet selection. This address will be consistent with the type specified in hh3cLIIPStreamAddrType. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.5 | InetAddress | read-write | current |
| hh3cLIIPStreamSrcAddrLength OBJECT-TYPE The length of the Source Prefix. A value of zero means all addresses to match. This prefix length will be consistent with the type specified in hh3cLIIPStreamAddrType. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.6 | InetAddressPrefixLength | read-write | current |
| hh3cLIIPStreamTosByte OBJECT-TYPE The value of the TOS byte. If hh3cLIIPStreamTosByte&(~hh3cLIIPStreamTosByteMask)!=0, configuration is rejected. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.7 | Integer32 (0..255) | read-write | current |
| hh3cLIIPStreamTosByteMask OBJECT-TYPE This value is ANDed with the value of the TOS byte in a packet and compared with hh3cLIIPStreamTosByte. If the values are equal, the comparison is equal. If both the mask and the TosByte value are zero, the result is to always accept. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.8 | Integer32 (0..255) | read-write | current |
| hh3cLIIPStreamFlowId OBJECT-TYPE The flow identifier in an IPv6 header. -1 indicates that the Flow Id is unused. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.9 | Integer32 (-1 | 0..1048575) | read-write | current |
| hh3cLIIPStreamProtocol OBJECT-TYPE The IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.10 | Integer32 (-1 | 0..255) | read-write | current |
| hh3cLIIPStreamDestL4PortMin OBJECT-TYPE The minimum value that the layer-4 destination port number in the packet must have in order to match. This value must be equal to or less than the value specified for this entry in hh3cLIIPStreamDestL4PortMax. If both hh3cLIIPStreamDestL4PortMin and hh3cLIIPStreamDestL4PortMax are at their default values, the port number is effectively unused. If hh3cLIIPStreamDestL4PortMin is equal to hh3cLIIPStreamDestL4PortMax, only one port number to be intercepted. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.11 | InetPortNumber | read-write | current |
| hh3cLIIPStreamDestL4PortMax OBJECT-TYPE The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in hh3cLIIPStreamDestL4PortMin. If both hh3cLIIPStreamDestL4PortMin and hh3cLIIPStreamDestL4PortMax are at their default values, the port number is effectively unused. If hh3cLIIPStreamDestL4PortMin is equal to hh3cLIIPStreamDestL4PortMax, only one port number to be intercepted. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.12 | InetPortNumber | read-write | current |
| hh3cLIIPStreamSrcL4PortMin OBJECT-TYPE The minimum value that the layer-4 destination port number in the packet must have in order to match. This value must be equal to or less than the value specified for this entry in hh3cLIIPStreamSrcL4PortMax. If both hh3cLIIPStreamSrcL4PortMin and hh3cLIIPStreamSrcL4PortMax are at their default values, the port number is effectively unused. If hh3cLIIPStreamSrcL4PortMin is equal to hh3cLIIPStreamSrcL4PortMax, only one port number to be intercepted. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.13 | InetPortNumber | read-write | current |
| hh3cLIIPStreamSrcL4PortMax OBJECT-TYPE The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in hh3cLIIPStreamSrcL4PortMin. If both hh3cLIIPStreamSrcL4PortMin and hh3cLIIPStreamSrcL4PortMax are at their default values, the port number is effectively unused. If hh3cLIIPStreamSrcL4PortMin is equal to hh3cLIIPStreamSrcL4PortMax, only one port number to be intercepted. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.14 | InetPortNumber | read-write | current |
| hh3cLIIPStreamVRF OBJECT-TYPE It is the name of a Virtual Routing and Forwarding (VRF) of a VPN. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.15 | SnmpAdminString | read-write | current |
| hh3cLIIPStreamRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.25506.2.111.2.1.1.1.18 | RowStatus | read-create | current |
| hh3cLIMACStream OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.3 | |||
| hh3cLIMACStreamObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.3.1 | |||
| hh3cLIMACStreamTable OBJECT-TYPE This table lists the IEEE 802 streams to be intercepted. It is associated with hh3cLIMediationTable and hh3cLIStreamTable. | 1.3.6.1.4.1.25506.2.111.3.1.1 | not-accessible | current | |
| hh3cLIMACStreamEntry OBJECT-TYPE A single stream to be intercepted. The first index indicates the Mediation Device. The second index is that of the stream's counter entry in the hh3cLIStreamTable. The second index permits multiple classifiers to be used together, such as having an MAC address as source or destination. | 1.3.6.1.4.1.25506.2.111.3.1.1.1 | not-accessible | current | |
| hh3cLIMACStreamFields OBJECT-TYPE This object displays what attributes will be compared to identify traffic. interface: indicates that traffic on the stated interface is to be intercepted dstMacAddress: indicates that traffic destined to a given address should be intercepted srcMacAddress: indicates that traffic sourced from a given address should be intercepted ethernetPid: indicates that traffic with a stated Ethernet Protocol Identifier should be intercepted dSap: indicates that traffic with an certain 802.2 LLC Destination SAP should be intercepted sSap: indicates that traffic with an certain 802.2 LLC Source SAP should be intercepted At least one of the bits has to be set in order to activate an entry. If multiple bits are set, traffic to be intercepted must be satisfied with all set attributes. | 1.3.6.1.4.1.25506.2.111.3.1.1.1.1 | Bits {interface(0), dstMacAddress(1), srcMacAddress(2), ethernetPid(3), dSap(4), sSap(5)} | read-write | current |
| hh3cLIMACStreamInterface OBJECT-TYPE Traffic received or transmitted over this interface will be intercepted. This value must be set when creating a stream entry, either zero, or a valid interface index. If the value is zero, interception accepts any interface. Additional parameter must be selected together. | 1.3.6.1.4.1.25506.2.111.3.1.1.1.2 | InterfaceIndexOrZero | read-write | current |
| hh3cLIMACStreamDestAddr OBJECT-TYPE The Destination address used in packet selection. | 1.3.6.1.4.1.25506.2.111.3.1.1.1.3 | MacAddress | read-write | current |
| hh3cLIMACStreamSrcAddr OBJECT-TYPE The Source Address used in packet selection. | 1.3.6.1.4.1.25506.2.111.3.1.1.1.4 | MacAddress | read-write | current |
| hh3cLIMACStreamEthPid OBJECT-TYPE The value of the Ethernet Protocol Identifier in the Ethernet traffic or IEEE 802.2 SNAP traffic. | 1.3.6.1.4.1.25506.2.111.3.1.1.1.5 | Unsigned32 | read-write | current |
| hh3cLIMACStreamDSap OBJECT-TYPE The value of the IEEE 802.2 Destination SAP. | 1.3.6.1.4.1.25506.2.111.3.1.1.1.6 | Unsigned32 | read-write | current |
| hh3cLIMACStreamSSap OBJECT-TYPE The value of the IEEE 802.2 Source SAP. | 1.3.6.1.4.1.25506.2.111.3.1.1.1.7 | Unsigned32 | read-write | current |
| hh3cLIMACStreamRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.25506.2.111.3.1.1.1.8 | RowStatus | read-create | current |
| hh3cLIUserStream OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.4 | |||
| hh3cLIUserStreamObjects OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.111.4.1 | |||
| hh3cLIUserStreamTable OBJECT-TYPE This table lists the user connection streams to be intercepted. It is associated with hh3cLIMediationTable and hh3cLIStreamTable. | 1.3.6.1.4.1.25506.2.111.4.1.1 | not-accessible | current | |
| hh3cLIUserStreamEntry OBJECT-TYPE A single stream to be intercepted. The first index indicates the Mediation Device. The second index is that of the stream's counter entry in the hh3cLIStreamTable. This permits multiple classifiers to be used together. | 1.3.6.1.4.1.25506.2.111.4.1.1.1 | not-accessible | current | |
| hh3cLIUserStreamAcctSessID OBJECT-TYPE This is the RADIUS attribute 44 acct-session-ID. The string must be set, and the length not be zero. | 1.3.6.1.4.1.25506.2.111.4.1.1.1.1 | OCTET STRING (SIZE(0..253)) | read-write | current |
| hh3cLIUserStreamRowStatus OBJECT-TYPE Operation status of this table entry. | 1.3.6.1.4.1.25506.2.111.4.1.1.1.2 | RowStatus | read-create | current |
Notifications
| Name | OID | Status |
|---|---|---|
| hh3cLIActive NOTIFICATION-TYPE This Notification is sent when a type of intercepting configuration is changed from inactive to active. The value of the hh3cLIStreamtype which identify the actual intercept stream is included in this notification. | 1.3.6.1.4.1.25506.2.111.1.2.0.1 | current |
| hh3cLITimeOut NOTIFICATION-TYPE When the time specified in hh3cLIMediationTimeout arrives, the device notifies the manager corresponding intercept is removed. | 1.3.6.1.4.1.25506.2.111.1.2.0.2 | current |
| hh3cLIFailureInformation NOTIFICATION-TYPE When interception is configured on distributed device, the configuration perhaps failed on some board. If this happened, this notification will occur. | 1.3.6.1.4.1.25506.2.111.1.2.0.3 | current |