MIBs Depot

HH3C-IF-EXT-MIB

Registered at
1.3.6.1.4.1.25506.2.40
Last updated
2021-05-14 00:00
Organization
New H3C Technologies Co., Ltd.
Revisions
2021-05-14 00:00, 2021-04-27 00:00, 2020-08-05 00:00, 2020-08-04 00:00, 2020-06-09 00:00, 2019-08-06 00:00, 2018-06-05 00:00, 2018-04-26 00:00, 2018-02-07 00:00, 2018-01-09 00:00, 2017-12-13 18:20, 2017-07-13 10:40, 2016-12-05 18:00, 2016-07-01 17:00, 2015-12-10 10:00, 2015-04-02 04:58, 2014-11-20 08:00, 2009-05-06 19:36, 2004-11-13 19:36
Namespace
comware
Source file
HH3C-IF-EXT-MIB
Digest
sha256:e4fbf7bea59eba9010200dd9d243b94dff391e6def052986738f4dac3802d96e

Description

This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches, and other products. Some objects in this MIB may be used only for some specific products, so users should refer to the related documents to acquire more detailed information.

Contact

Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085

Imports

FromSymbols
HCNUM-TCCounterBasedGauge64
HH3C-OID-MIBhh3cCommon
IF-MIBInterfaceIndex, ifDescr, ifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HCNUM-TC
HH3C-IF-EXT-MIB
HH3C-OID-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hh3cIfExtScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.1
hh3cIfStatGlobalFlowInterval
OBJECT-TYPE
Sampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function.
1.3.6.1.4.1.25506.2.40.1.1Integer32read-writecurrent
hh3cIfShutDownInterval
OBJECT-TYPE
Set the port status detection timer. The device starts a port status detection timer when a port is shut down by a protocol. Once the timer expires, the device brings up the port so the port status reflects the port's physical status.
1.3.6.1.4.1.25506.2.40.1.2Integer32read-writecurrent
hh3cIfThroughputInKbps
OBJECT-TYPE
Actual incoming throughput of the device in kbps.
1.3.6.1.4.1.25506.2.40.1.3CounterBasedGauge64read-onlycurrent
hh3cIfThroughputOutKbps
OBJECT-TYPE
Actual outgoing throughput of the device in kbps.
1.3.6.1.4.1.25506.2.40.1.4CounterBasedGauge64read-onlycurrent
hh3cIfExtGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.2
hh3cIfStat
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.2.1
hh3cIfStatScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.2.1.1
hh3cIfStatTable
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.2.1.2
hh3cIfFlowStatTable
OBJECT-TYPE
This table contains objects to get statistic information of interfaces on a device.
1.3.6.1.4.1.25506.2.40.2.1.2.1not-accessiblecurrent
hh3cIfFlowStatEntry
OBJECT-TYPE
Entry items
1.3.6.1.4.1.25506.2.40.2.1.2.1.1not-accessiblecurrent
hh3cIfStatFlowInterval
OBJECT-TYPE
Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.
1.3.6.1.4.1.25506.2.40.2.1.2.1.1.1Integer32read-writecurrent
hh3cIfStatFlowInBits
OBJECT-TYPE
In bits in the specified interval.
1.3.6.1.4.1.25506.2.40.2.1.2.1.1.2Unsigned32read-onlycurrent
hh3cIfStatFlowOutBits
OBJECT-TYPE
Out bits in the specified interval.
1.3.6.1.4.1.25506.2.40.2.1.2.1.1.3Unsigned32read-onlycurrent
hh3cIfStatFlowInPkts
OBJECT-TYPE
In packets in the specified interval.
1.3.6.1.4.1.25506.2.40.2.1.2.1.1.4Unsigned32read-onlycurrent
hh3cIfStatFlowOutPkts
OBJECT-TYPE
Out packets in the specified interval.
1.3.6.1.4.1.25506.2.40.2.1.2.1.1.5Unsigned32read-onlycurrent
hh3cIfStatFlowInBytes
OBJECT-TYPE
In bytes in the specified interval.
1.3.6.1.4.1.25506.2.40.2.1.2.1.1.6Unsigned32read-onlycurrent
hh3cIfStatFlowOutBytes
OBJECT-TYPE
Out bytes in the specified interval.
1.3.6.1.4.1.25506.2.40.2.1.2.1.1.7Unsigned32read-onlycurrent
hh3cIfSpeedStatTable
OBJECT-TYPE
This table contains objects to get average speed information in the specified interval for interfaces on a device.
1.3.6.1.4.1.25506.2.40.2.1.2.2not-accessiblecurrent
hh3cIfSpeedStatEntry
OBJECT-TYPE
Entry items
1.3.6.1.4.1.25506.2.40.2.1.2.2.1not-accessiblecurrent
hh3cIfSpeedStatInterval
OBJECT-TYPE
Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.
1.3.6.1.4.1.25506.2.40.2.1.2.2.1.1Integer32read-writecurrent
hh3cIfSpeedStatInPkts
OBJECT-TYPE
Average of input packets per second in the interval specified by hh3cIfSpeedStatInterval.
1.3.6.1.4.1.25506.2.40.2.1.2.2.1.2Unsigned32read-onlycurrent
hh3cIfSpeedStatOutPkts
OBJECT-TYPE
Average of output packets per second in the interval specified by hh3cIfSpeedStatInterval.
1.3.6.1.4.1.25506.2.40.2.1.2.2.1.3Unsigned32read-onlycurrent
hh3cIfSpeedStatInBytes
OBJECT-TYPE
Average of input bytes per second in the interval specified by hh3cIfSpeedStatInterval.
1.3.6.1.4.1.25506.2.40.2.1.2.2.1.4Unsigned32read-onlycurrent
hh3cIfSpeedStatOutBytes
OBJECT-TYPE
Average of output bytes per second in the interval specified by hh3cIfSpeedStatInterval.
1.3.6.1.4.1.25506.2.40.2.1.2.2.1.5Unsigned32read-onlycurrent
hh3cIfSpeedStatInBits
OBJECT-TYPE
Average of input bits per second in the interval specified by hh3cIfSpeedStatInterval.
1.3.6.1.4.1.25506.2.40.2.1.2.2.1.6Unsigned32read-onlycurrent
hh3cIfSpeedStatOutBits
OBJECT-TYPE
Average of output bits per second in the interval specified by hh3cIfSpeedStatInterval.
1.3.6.1.4.1.25506.2.40.2.1.2.2.1.7Unsigned32read-onlycurrent
hh3cIfHCFlowStatTable
OBJECT-TYPE
This table contains objects to get statistic information of interfaces on a device.
1.3.6.1.4.1.25506.2.40.2.1.2.3not-accessiblecurrent
hh3cIfHCFlowStatEntry
OBJECT-TYPE
Entry items
1.3.6.1.4.1.25506.2.40.2.1.2.3.1not-accessiblecurrent
hh3cIfStatFlowHCInBits
OBJECT-TYPE
In bits in the specified interval. This object is a 64-bit version of hh3cIfStatFlowInBits.
1.3.6.1.4.1.25506.2.40.2.1.2.3.1.1CounterBasedGauge64read-onlycurrent
hh3cIfStatFlowHCOutBits
OBJECT-TYPE
Out bits in the specified interval. This object is a 64-bit version of hh3cIfStatFlowOutBits.
1.3.6.1.4.1.25506.2.40.2.1.2.3.1.2CounterBasedGauge64read-onlycurrent
hh3cIfStatFlowHCInPkts
OBJECT-TYPE
In packets in the specified interval. This object is a 64-bit version of hh3cIfStatFlowInPkts.
1.3.6.1.4.1.25506.2.40.2.1.2.3.1.3CounterBasedGauge64read-onlycurrent
hh3cIfStatFlowHCOutPkts
OBJECT-TYPE
Out packets in the specified interval. This object is a 64-bit version of hh3cIfStatFlowOutPkts.
1.3.6.1.4.1.25506.2.40.2.1.2.3.1.4CounterBasedGauge64read-onlycurrent
hh3cIfStatFlowHCInBytes
OBJECT-TYPE
In bytes in the specified interval. This object is a 64-bit version of hh3cIfStatFlowInBytes.
1.3.6.1.4.1.25506.2.40.2.1.2.3.1.5CounterBasedGauge64read-onlycurrent
hh3cIfStatFlowHCOutBytes
OBJECT-TYPE
Out bytes in the specified interval. This object is a 64-bit version of hh3cIfStatFlowOutBytes.
1.3.6.1.4.1.25506.2.40.2.1.2.3.1.6CounterBasedGauge64read-onlycurrent
hh3cIfHCSpeedStatTable
OBJECT-TYPE
This table contains objects to get average speed information in the specified interval for interfaces on a device. This table is a 64-bit version of hh3cIfSpeedStatTable.
1.3.6.1.4.1.25506.2.40.2.1.2.4not-accessiblecurrent
hh3cIfHCSpeedStatEntry
OBJECT-TYPE
Entry items
1.3.6.1.4.1.25506.2.40.2.1.2.4.1not-accessiblecurrent
hh3cIfSpeedStatHCInPkts
OBJECT-TYPE
Average of input packets per second in the interval specified by hh3cIfSpeedStatInterval. This object is a 64-bit version of hh3cIfSpeedStatInPkts.
1.3.6.1.4.1.25506.2.40.2.1.2.4.1.1CounterBasedGauge64read-onlycurrent
hh3cIfSpeedStatHCOutPkts
OBJECT-TYPE
Average of output packets per second in the interval specified by hh3cIfSpeedStatInterval. This object is a 64-bit version of hh3cIfSpeedStatOutPkts.
1.3.6.1.4.1.25506.2.40.2.1.2.4.1.2CounterBasedGauge64read-onlycurrent
hh3cIfSpeedStatHCInBytes
OBJECT-TYPE
Average of input bytes per second in the interval specified by hh3cIfSpeedStatInterval. This object is a 64-bit version of hh3cIfSpeedStatInBytes.
1.3.6.1.4.1.25506.2.40.2.1.2.4.1.3CounterBasedGauge64read-onlycurrent
hh3cIfSpeedStatHCOutBytes
OBJECT-TYPE
Average of output bytes per second in the interval specified by hh3cIfSpeedStatInterval. This object is a 64-bit version of hh3cIfSpeedStatOutBytes.
1.3.6.1.4.1.25506.2.40.2.1.2.4.1.4CounterBasedGauge64read-onlycurrent
hh3cIfSpeedStatHCInBits
OBJECT-TYPE
Average of input bits per second in the interval specified by hh3cIfSpeedStatInterval. This object is a 64-bit version of hh3cIfSpeedStatInBits.
1.3.6.1.4.1.25506.2.40.2.1.2.4.1.5CounterBasedGauge64read-onlycurrent
hh3cIfSpeedStatHCOutBits
OBJECT-TYPE
Average of output bits per second in the interval specified by hh3cIfSpeedStatInterval. This object is a 64-bit version of hh3cIfSpeedStatOutBits.
1.3.6.1.4.1.25506.2.40.2.1.2.4.1.6CounterBasedGauge64read-onlycurrent
hh3cIfControl
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.2.2
hh3cRTParentIfTable
OBJECT-TYPE
This table contains all interfaces that can create subinterfaces.
1.3.6.1.4.1.25506.2.40.2.2.1not-accessiblecurrent
hh3cRTParentIfEntry
OBJECT-TYPE
This entry describes an interface that can create subinterfaces.
1.3.6.1.4.1.25506.2.40.2.2.1.1not-accessiblecurrent
hh3cRTParentIfIndex
OBJECT-TYPE
The index of the interface that can create subinterfaces. The value is the same as the ifIndex value for this interface.
1.3.6.1.4.1.25506.2.40.2.2.1.1.1Integer32 (1..2147483647)not-accessiblecurrent
hh3cRTMinSubIfOrdinal
OBJECT-TYPE
The min ordinal of the subinterface.
1.3.6.1.4.1.25506.2.40.2.2.1.1.2Integer32read-onlycurrent
hh3cRTMaxSubIfOrdinal
OBJECT-TYPE
The max ordinal of the subinterface.
1.3.6.1.4.1.25506.2.40.2.2.1.1.3Integer32read-onlycurrent
hh3cRTSubIfTable
OBJECT-TYPE
This table contains objects to create or delete subinterfaces. To create a subinterface, a valid parent interface must be specified by hh3cRTSubIfParentIfIndex, and hh3cRTSubIfOrdinal must be in the range between hh3cRTMinSubIfOrdinal and hh3cRTMaxSubIfOrdinal of the parent interface from hh3cRTParentIfTable. Subinterfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface doesn't affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces can't operate correctly unless the main interface is connected. Creating multiple subinterfaces on a single interface enables you to plan network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP.
1.3.6.1.4.1.25506.2.40.2.2.2not-accessiblecurrent
hh3cRTSubIfEntry
OBJECT-TYPE
The hh3cRTSubIfTable entry items
1.3.6.1.4.1.25506.2.40.2.2.2.1not-accessiblecurrent
hh3cRTSubIfParentIfIndex
OBJECT-TYPE
The parent interface index. The value should be the same as hh3cRTParentIfIndex.
1.3.6.1.4.1.25506.2.40.2.2.2.1.1Integer32 (1..2147483647)not-accessiblecurrent
hh3cRTSubIfOrdinal
OBJECT-TYPE
The ordinal of the subinterface. It should between hh3cRTMinSubIfOrdinal and hh3cRTMaxSubIfOrdinal of the parent interface.
1.3.6.1.4.1.25506.2.40.2.2.2.1.2Integer32 (1..2147483647)not-accessiblecurrent
hh3cRTSubIfSubIfIndex
OBJECT-TYPE
The ifIndex value of the subinterface
1.3.6.1.4.1.25506.2.40.2.2.2.1.3Integer32read-onlycurrent
hh3cRTSubIfSubIfDesc
OBJECT-TYPE
The name of the interface
1.3.6.1.4.1.25506.2.40.2.2.2.1.4DisplayString (SIZE(0..255))read-onlycurrent
hh3cRTSubIfRowStatus
OBJECT-TYPE
Operation status.
1.3.6.1.4.1.25506.2.40.2.2.2.1.5RowStatusread-createcurrent
hh3cIfLinkModeTable
OBJECT-TYPE
This table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode.
1.3.6.1.4.1.25506.2.40.2.2.3not-accessiblecurrent
hh3cIfLinkModeEntry
OBJECT-TYPE
The interface link mode table entry
1.3.6.1.4.1.25506.2.40.2.2.3.1not-accessiblecurrent
hh3cIfLinkModeIndex
OBJECT-TYPE
The value is the same as ifIndex.
1.3.6.1.4.1.25506.2.40.2.2.3.1.1Integer32 (1..2147483647)not-accessiblecurrent
hh3cIfLinkMode
OBJECT-TYPE
The current link mode of the interface. If hh3cIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface.
1.3.6.1.4.1.25506.2.40.2.2.3.1.2INTEGER {bridgeMode(1), routeMode(2)}read-writecurrent
hh3cIfLinkModeSwitchSupport
OBJECT-TYPE
Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode.
1.3.6.1.4.1.25506.2.40.2.2.3.1.3TruthValueread-onlycurrent
hh3cIfPortTypeTable
OBJECT-TYPE
This table contains objects to get or set the port type of an interface.
1.3.6.1.4.1.25506.2.40.2.2.4not-accessiblecurrent
hh3cIfPortTypeEntry
OBJECT-TYPE
The interface port type table entry.
1.3.6.1.4.1.25506.2.40.2.2.4.1not-accessiblecurrent
hh3cIfPortTypeIndex
OBJECT-TYPE
The value is the same as ifIndex.
1.3.6.1.4.1.25506.2.40.2.2.4.1.1InterfaceIndexnot-accessiblecurrent
hh3cIfPortType
OBJECT-TYPE
The current port type of the interface. Don't set the port type to other for an interface.
1.3.6.1.4.1.25506.2.40.2.2.4.1.2INTEGER {other(1), ethernet(2), fc(3)}read-writecurrent
hh3cIfPfcDot1pTable
OBJECT-TYPE
This table can set the inbound and outbound rate thresholds for the specified dot1p values.
1.3.6.1.4.1.25506.2.40.2.2.5not-accessiblecurrent
hh3cIfPfcDot1pEntry
OBJECT-TYPE
Entry items
1.3.6.1.4.1.25506.2.40.2.2.5.1not-accessiblecurrent
hh3cIfPfcDot1pValue
OBJECT-TYPE
The PFC dot1p value list.
1.3.6.1.4.1.25506.2.40.2.2.5.1.1INTEGER {pri0(1), pri1(2), pri2(3), pri3(4), pri4(5), pri5(6), pri6(7), pri7(8)}read-onlycurrent
hh3cIfPfcDot1pInPps
OBJECT-TYPE
The current inbound rate for the PFC dot1p.
1.3.6.1.4.1.25506.2.40.2.2.5.1.2Unsigned32read-onlycurrent
hh3cIfPfcDot1pOutPps
OBJECT-TYPE
The current outbound rate for the PFC dot1p.
1.3.6.1.4.1.25506.2.40.2.2.5.1.3Unsigned32read-onlycurrent
hh3cIfPfcDot1pInPpsThreshold
OBJECT-TYPE
The threshold for the inbound rate. If the hh3cIfPfcDot1pInPpsThreshold is set to 0, no hh3cIfPfcInRising will be generated.
1.3.6.1.4.1.25506.2.40.2.2.5.1.4Unsigned32read-writecurrent
hh3cIfPfcDot1pOutPpsThreshold
OBJECT-TYPE
The threshold for the outbound rate. If the hh3cIfPfcDot1pOutPpsThreshold is set to 0, no hh3cIfPfcOutRising will be generated.
1.3.6.1.4.1.25506.2.40.2.2.5.1.5Unsigned32read-writecurrent
hh3cIfQueBufferTable
OBJECT-TYPE
This table contains objects to get the usage info, thresholds, and statistics of queue buffers and to set the thresholds of queue buffers.
1.3.6.1.4.1.25506.2.40.2.2.6not-accessiblecurrent
hh3cIfQueBufferEntry
OBJECT-TYPE
Entry items
1.3.6.1.4.1.25506.2.40.2.2.6.1not-accessiblecurrent
hh3cIfQueId
OBJECT-TYPE
The buffer's queue ID.
1.3.6.1.4.1.25506.2.40.2.2.6.1.1INTEGER {que0(1), que1(2), que2(3), que3(4), que4(5), que5(6), que6(7), que7(8)}read-onlycurrent
hh3cIfQueOutUcastTotal
OBJECT-TYPE
The total amount of outbound unicast queue buffer.
1.3.6.1.4.1.25506.2.40.2.2.6.1.2Unsigned32read-onlycurrent
hh3cIfQueOutUcastFree
OBJECT-TYPE
The amount of free outbound unicast queue buffer.
1.3.6.1.4.1.25506.2.40.2.2.6.1.3Unsigned32read-onlycurrent
hh3cIfQueOutUcastUsedRatio
OBJECT-TYPE
The ratio of outbound unicast queue buffer which is used.
1.3.6.1.4.1.25506.2.40.2.2.6.1.4Unsigned32read-onlycurrent
hh3cIfQueOutUcastUsedPeak
OBJECT-TYPE
The peak of outbound unicast queue buffer which is used.
1.3.6.1.4.1.25506.2.40.2.2.6.1.5Unsigned32read-onlycurrent
hh3cIfQueOutUcastThreshold
OBJECT-TYPE
The alarm threshold of outbound unicast queue buffer which is used.
1.3.6.1.4.1.25506.2.40.2.2.6.1.6Unsigned32read-writecurrent
hh3cIfQueOutUcastOverThres
OBJECT-TYPE
The number of times of exceeding the alarm threshold of outbound unicast queue buffer which is used.
1.3.6.1.4.1.25506.2.40.2.2.6.1.7Unsigned32read-onlycurrent
hh3cIfQueInTotal
OBJECT-TYPE
The total amount of inbound queue buffer.
1.3.6.1.4.1.25506.2.40.2.2.6.1.8Unsigned32read-onlycurrent
hh3cIfQueInFree
OBJECT-TYPE
The amount of free inbound queue buffer.
1.3.6.1.4.1.25506.2.40.2.2.6.1.9Unsigned32read-onlycurrent
hh3cIfQueInUsedRatio
OBJECT-TYPE
The ratio of inbound queue buffer which is used.
1.3.6.1.4.1.25506.2.40.2.2.6.1.10Unsigned32read-onlycurrent
hh3cIfQueInUsedPeak
OBJECT-TYPE
The peak of inbound queue buffer which is used.
1.3.6.1.4.1.25506.2.40.2.2.6.1.11Unsigned32read-onlycurrent
hh3cIfQueInThreshold
OBJECT-TYPE
The alarm threshold of inbound queue buffer which is used.
1.3.6.1.4.1.25506.2.40.2.2.6.1.12Unsigned32read-writecurrent
hh3cIfQueInOverThres
OBJECT-TYPE
The number of times over the alarm threshold of inbound queue buffer which is used.
1.3.6.1.4.1.25506.2.40.2.2.6.1.13Unsigned32read-onlycurrent
hh3cIfQueInHeadRoomTotal
OBJECT-TYPE
The total amount of inbound queue headroom buffer.
1.3.6.1.4.1.25506.2.40.2.2.6.1.14Unsigned32read-onlycurrent
hh3cIfQueInHeadRoomFree
OBJECT-TYPE
The amount of free inbound queue headroom buffer.
1.3.6.1.4.1.25506.2.40.2.2.6.1.15Unsigned32read-onlycurrent
hh3cIfQueInHeadRoomUsedRatio
OBJECT-TYPE
The ratio of inbound queue headroom buffer which is used.
1.3.6.1.4.1.25506.2.40.2.2.6.1.16Unsigned32read-onlycurrent
hh3cIfQueInHeadRoomUsedPeak
OBJECT-TYPE
The peak of inbound queue headroom buffer which is used.
1.3.6.1.4.1.25506.2.40.2.2.6.1.17Unsigned32read-onlycurrent
hh3cIfInterfaces
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.2.3
hh3cIfPhysicalNumber
OBJECT-TYPE
Represents the number of physical interfaces on the device.
1.3.6.1.4.1.25506.2.40.2.3.1Integer32read-onlycurrent
hh3cIfTable
OBJECT-TYPE
A list of interface entries. The number of entries is given by the value of IfNumber.
1.3.6.1.4.1.25506.2.40.2.3.2not-accessiblecurrent
hh3cIfEntry
OBJECT-TYPE
An entry containing management information applicable to a particular interface.
1.3.6.1.4.1.25506.2.40.2.3.2.1not-accessiblecurrent
hh3cIfUpDownTimes
OBJECT-TYPE
The interface's up/down times, since the device was initialized.
1.3.6.1.4.1.25506.2.40.2.3.2.1.1Integer32read-onlycurrent
hh3cIfMtu
OBJECT-TYPE
The size of the largest datagram that can be sent or received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interfaces.
1.3.6.1.4.1.25506.2.40.2.3.2.1.2Integer32read-writecurrent
hh3cIfBandwidthRate
OBJECT-TYPE
The rate of the bandwidth for an interface.
1.3.6.1.4.1.25506.2.40.2.3.2.1.3Integer32 (0..100)read-onlycurrent
hh3cIfDiscardPktRate
OBJECT-TYPE
The rate of the discarded packets for an interface.
1.3.6.1.4.1.25506.2.40.2.3.2.1.4Integer32 (0..100)read-onlycurrent
hh3cIfStatusKeepTime
OBJECT-TYPE
The time since the interface entered its current operational state.
1.3.6.1.4.1.25506.2.40.2.3.2.1.5TimeTicksread-onlycurrent
hh3cIfInNUcastPkts
OBJECT-TYPE
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
1.3.6.1.4.1.25506.2.40.2.3.2.1.6Counter64read-onlycurrent
hh3cIfOutNUcastPkts
OBJECT-TYPE
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address.
1.3.6.1.4.1.25506.2.40.2.3.2.1.7Counter64read-onlycurrent
hh3cIfIsPoe
OBJECT-TYPE
Whether the interface supports PoE.
1.3.6.1.4.1.25506.2.40.2.3.2.1.8TruthValueread-onlycurrent
hh3cIfOperStatus
OBJECT-TYPE
Current status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, hh3cIfOperStatus should be admindown. If ifAdminStatus is changed to up, hh3cIfOperStatus should change to up if the interface is ready to send and receive network traffic; otherwise, it should stay in down state.
1.3.6.1.4.1.25506.2.40.2.3.2.1.9INTEGER {up(1), down(2), testing(3), admindown(4)}read-onlycurrent
hh3cIfDownTimes
OBJECT-TYPE
Number of times the interface went down, since the device was initialized.
1.3.6.1.4.1.25506.2.40.2.3.2.1.10Integer32read-onlycurrent
hh3cIfPfcStatus
OBJECT-TYPE
Pfc (Priority-based Flow Control) status. Forcibly enable Pfc by enable(1). Disable Pfc by disable(2). Set Pfc to auto mode by auto(3). In auto mode, the local end automatically negotiates the Pfc status with its peer. When congestion occurs in the network, the local device notifies the peer to stop sending packets carrying the specified 802.1p priority if all of the following conditions exist: 1. Both the local end and the remote end have Pfc enabled. 2. Both the local end and the remote end have the dot1p list specified by hh3cIfPfcDot1pNoDrop. 3. The specified 802.1p priority is in the dot1p list of hh3cIfPfcDot1pNoDrop. 4. The local end receives a packet carrying the specified 802.1p priority.
1.3.6.1.4.1.25506.2.40.2.3.2.1.11INTEGER {enable(1), disable(2), auto(3)}read-writecurrent
hh3cIfPfcDot1pNoDrop
OBJECT-TYPE
Pfc (Priority-based Flow Control) dot1q list, bit 0 through bit 7 corresponding to priority 0 through priority 7. See hh3cIfPfcStatus.
1.3.6.1.4.1.25506.2.40.2.3.2.1.12Bits {pri0(0), pri1(1), pri2(2), pri3(3), pri4(4), pri5(5), pri6(6), pri7(7)}read-writecurrent
hh3cIfDescription
OBJECT-TYPE
This object is also an 'alias' name for the interface specified by a network manager, like the object of ifAlias. However, the size of this object is larger than ifAlias. When this object is set to a string of more than 64 characters, only the first 64 characters of the object are read for the IfAlias object.
1.3.6.1.4.1.25506.2.40.2.3.2.1.13DisplayString (SIZE(0..255))read-writecurrent
hh3cIfFwdErrDiscards
OBJECT-TYPE
The number of packets that were discarded when being forwarded.
1.3.6.1.4.1.25506.2.40.2.3.2.1.14Unsigned32read-onlycurrent
hh3cIfFiberOrCopper
OBJECT-TYPE
Type of the port,which can be copper or fiber.
1.3.6.1.4.1.25506.2.40.2.3.2.1.15INTEGER {unknown(0), fiber(1), copper(2)}read-onlycurrent
hh3cIfTransferMode
OBJECT-TYPE
Transfer mode of the port, which can be lan or wan.
1.3.6.1.4.1.25506.2.40.2.3.2.1.16INTEGER {lan(1), wan(2)}read-onlycurrent
hh3cIfUsingTable
OBJECT-TYPE
A table containing management information applicable to splitting interfaces. To improve port density, reduce costs, and improve network flexibility, a high-bandwidth interface can be split into multiple low-bandwidth breakout interfaces, and the breakout interfaces can be combined into a higher-bandwidth interface. For example, a 40-GE interface can be split into four 10-GE breakout interfaces. After the operation takes effect on a 40-GE interface, the system deletes the 40-GE interface and creates four 10-GE breakout interfaces.
1.3.6.1.4.1.25506.2.40.2.3.3not-accessiblecurrent
hh3cIfUsingEntry
OBJECT-TYPE
An entry of hh3cIfUsingTable.
1.3.6.1.4.1.25506.2.40.2.3.3.1not-accessiblecurrent
hh3cIfUsingIndex
OBJECT-TYPE
Index of an interface that can be split into multiple low-bandwidth breakout interfaces or be restored to a high-bandwidth interface.
1.3.6.1.4.1.25506.2.40.2.3.3.1.1Integer32 (1..2147483647)not-accessiblecurrent
hh3cIfUsingSupportType
OBJECT-TYPE
This object specifies the port type which can be split into or restored to. From lowest bit, each bit corresponds to a port type ('10GE', '20GE', '40GE', '100GE', '25GE', '50GE', '200GE', '400GE'). For example, value 3 means this object can be split into 10GE or 20GE, value 4 means this object can be split into 40GE, or can be restored to 40GE.
1.3.6.1.4.1.25506.2.40.2.3.3.1.2Integer32read-onlycurrent
hh3cIfUsingType
OBJECT-TYPE
This object specifies the port type that can be split into or restored to. After this object is set to a non-zero value, the operation returns success in the following cases: 1. The original instance still exists and is read as a non-zero value. In this case, object hh3cIfUsingStatus change to needReboot(1), which means that you need to reboot the line card (for distributed devices) or device (for centralized devices) where the port is located to make the operation take effect. Set this object to noUsing(0) for cancelling the operation. 2. The operation takes effect immediately. Original instance is deleted and new instance is created while the operation takes effect.
1.3.6.1.4.1.25506.2.40.2.3.3.1.3INTEGER {noUsing(0), using10GE(1), using20GE(2), using40GE(3), using100GE(4), using25GE(5), using50GE(6), using200GE(7), using400GE(8)}read-writecurrent
hh3cIfUsingStatus
OBJECT-TYPE
After object hh3cIfUsingType is set to a non-zero value, the value for this object is needReboot(1) until you reboot the line card (for distributed devices) or device (for centralized devices) where the port is located.
1.3.6.1.4.1.25506.2.40.2.3.3.1.4INTEGER {noUsing(0), needReboot(1)}read-onlycurrent
hh3cIfExtTrap
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.3
hh3cIfExtTrapPrex
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.3.0
hh3cIfExtTrapObject
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.3.1
hh3cIfExtTrapCfgTable
OBJECT-TYPE
The trap configuration table.
1.3.6.1.4.1.25506.2.40.3.1.1not-accessiblecurrent
hh3cIfExtTrapCfgEntry
OBJECT-TYPE
An entry for this table.
1.3.6.1.4.1.25506.2.40.3.1.1.1not-accessiblecurrent
hh3cIfBandwidthUpperLimit
OBJECT-TYPE
The rate of the bandwidth upper limit for an interface.
1.3.6.1.4.1.25506.2.40.3.1.1.1.1Integer32 (1..100)read-writecurrent
hh3cIfDiscardPktRateUpperLimit
OBJECT-TYPE
The rate of the discarded packets upper limit for an interface.
1.3.6.1.4.1.25506.2.40.3.1.1.1.2Integer32 (1..100)read-writecurrent
hh3cIfMonScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.4
hh3cIfMonGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.5
hh3cIfMonStat
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.5.1
hh3cIfMonStatTable
OBJECT-TYPE
This table is about some types of statistics.
1.3.6.1.4.1.25506.2.40.5.1.1not-accessiblecurrent
hh3cIfMonStatEntry
OBJECT-TYPE
Entry items.
1.3.6.1.4.1.25506.2.40.5.1.1.1not-accessiblecurrent
hh3cIfMonInputUsageStatistics
OBJECT-TYPE
Statistics about the inbound bandwidth usage.
1.3.6.1.4.1.25506.2.40.5.1.1.1.1Unsigned32read-onlycurrent
hh3cIfMonOutputUsageStatistics
OBJECT-TYPE
Statistics about the outbound bandwidth usage.
1.3.6.1.4.1.25506.2.40.5.1.1.1.2Unsigned32read-onlycurrent
hh3cIfMonInputErrorAlarmStatistics
OBJECT-TYPE
Statistics about the number of inbound error packets.
1.3.6.1.4.1.25506.2.40.5.1.1.1.3Counter64read-onlycurrent
hh3cIfMonOutputErrorAlarmStatistics
OBJECT-TYPE
Statistics about the number of outbound error packets.
1.3.6.1.4.1.25506.2.40.5.1.1.1.4Counter64read-onlycurrent
hh3cIfMonSdhErrorStatistics
OBJECT-TYPE
Statistics about the number of SDH error packets.
1.3.6.1.4.1.25506.2.40.5.1.1.1.5Counter64read-onlycurrent
hh3cIfMonSdhB1ErrorStatistics
OBJECT-TYPE
Statistics about the number of SDH B1 error packets.
1.3.6.1.4.1.25506.2.40.5.1.1.1.6Counter64read-onlycurrent
hh3cIfMonSdhB2ErrorStatistics
OBJECT-TYPE
Statistics about the number of SDH B2 error packets.
1.3.6.1.4.1.25506.2.40.5.1.1.1.7Counter64read-onlycurrent
hh3cIfMonCRCErrorStatistics
OBJECT-TYPE
Statistics about the number of CRC error packets.
1.3.6.1.4.1.25506.2.40.5.1.1.1.8Counter64read-onlycurrent
hh3cIfMonRxPauseFrameStatistics
OBJECT-TYPE
Statistics about the number of received pause frames.
1.3.6.1.4.1.25506.2.40.5.1.1.1.9Counter64read-onlycurrent
hh3cIfMonTxPauseFrameStatistics
OBJECT-TYPE
Statistics about the number of transmitted pause frames.
1.3.6.1.4.1.25506.2.40.5.1.1.1.10Counter64read-onlycurrent
hh3cIfMonRuntStatistics
OBJECT-TYPE
Statistics about the Runt packets.
1.3.6.1.4.1.25506.2.40.5.1.1.1.11Counter64read-onlycurrent
hh3cIfMonGiantStatistics
OBJECT-TYPE
Statistics about the Giant packets.
1.3.6.1.4.1.25506.2.40.5.1.1.1.12Counter64read-onlycurrent
hh3cIfMonControl
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.5.2
hh3cIfMonThresholdTable
OBJECT-TYPE
This table is about the upper threshold, lower threshold, CRC type, and inspection interval. The upper threshold and lower threshold must be bound together. If the CRC type is configured, node hh3cIfMonCRCErrType must be carried. If there is no current configuration for a type, all attributes of this type must be carried. After modification, the table hh3cIfMonAlarmDownEnableTable will be changed.If there is configuration for the current type, setting all attributes of this type to invalid values indicates that the configuration of this type is deleted, and the table hh3cIfMonAlarmDownEnableTable will be changed. Take CRC as an example. If there is no CRC configuration, nodes hh3cIfMonCRCErrorLowThres, hh3cIfMonCRCErrorLowThres, hh3cIfMonCRCErrorLowThres, and hh3cIfMonCRCErrorLowThres must be carried. After modification, the node hh3cIfMonCRCErrorEnableDown becomes false. If there is CRC configuration, settings the nodes hh3cIfMonCRCErrorLowThres, hh3cIfMonCRCErrorHighThres, hh3cIfMonCRCErrorInterval, and hh3cIfMonCRCErrorInterval to invalid values indicates the CRC configuration is deleted, and the node hh3cIfMonCRCErrorEnableDown becomes invalid.
1.3.6.1.4.1.25506.2.40.5.2.1not-accessiblecurrent
hh3cIfMonThresholdEntry
OBJECT-TYPE
Entry items.
1.3.6.1.4.1.25506.2.40.5.2.1.1not-accessiblecurrent
hh3cIfMonInputUsageLowThres
OBJECT-TYPE
Lower threshold for the inbound bandwidth usage.
1.3.6.1.4.1.25506.2.40.5.2.1.1.1Unsigned32read-writecurrent
hh3cIfMonInputUsageHighThres
OBJECT-TYPE
Upper threshold for the inbound bandwidth usage.
1.3.6.1.4.1.25506.2.40.5.2.1.1.2Unsigned32read-writecurrent
hh3cIfMonOutputUsageLowThres
OBJECT-TYPE
Lower threshold for the outbound bandwidth usage.
1.3.6.1.4.1.25506.2.40.5.2.1.1.3Unsigned32read-writecurrent
hh3cIfMonOutputUsageHighThres
OBJECT-TYPE
Upper threshold for the outbound bandwidth usage.
1.3.6.1.4.1.25506.2.40.5.2.1.1.4Unsigned32read-writecurrent
hh3cIfMonInputErrorAlarmLowThres
OBJECT-TYPE
Lower threshold for the number of inbound error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.5Unsigned32read-writecurrent
hh3cIfMonInputErrorAlarmHighThres
OBJECT-TYPE
Upper threshold for the number of inbound error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.6Unsigned32read-writecurrent
hh3cIfMonInputErrorAlarmInterval
OBJECT-TYPE
Inspection interval for the number of inbound error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.7Unsigned32read-writecurrent
hh3cIfMonOutputErrorAlarmLowThres
OBJECT-TYPE
Lower threshold for the number of outbound error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.8Unsigned32read-writecurrent
hh3cIfMonOutputErrorAlarmHighThres
OBJECT-TYPE
Upper threshold for the number of outbound error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.9Unsigned32read-writecurrent
hh3cIfMonOutputErrorAlarmInterval
OBJECT-TYPE
Inspection interval for the number of outbound error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.10Unsigned32read-writecurrent
hh3cIfMonSdhErrorLowThres
OBJECT-TYPE
Lower threshold for the number of SDH error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.11Unsigned32read-writecurrent
hh3cIfMonSdhErrorHighThres
OBJECT-TYPE
Upper threshold for the number of SDH error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.12Unsigned32read-writecurrent
hh3cIfMonSdhErrorInterval
OBJECT-TYPE
Inspection interval for the number of SDH error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.13Unsigned32read-writecurrent
hh3cIfMonSdhB1ErrorLowThres
OBJECT-TYPE
Lower threshold for the number of SDH B1 error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.14Unsigned32read-writecurrent
hh3cIfMonSdhB1ErrorHighThres
OBJECT-TYPE
Upper threshold for the number of SDH B1 error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.15Unsigned32read-writecurrent
hh3cIfMonSdhB1ErrorInterval
OBJECT-TYPE
Inspection interval for the number of SDH B1 error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.16Unsigned32read-writecurrent
hh3cIfMonSdhB2ErrorLowThres
OBJECT-TYPE
Lower threshold for the number of SDH B2 error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.17Unsigned32read-writecurrent
hh3cIfMonSdhB2ErrorHighThres
OBJECT-TYPE
Upper threshold for the number of SDH B2 error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.18Unsigned32read-writecurrent
hh3cIfMonSdhB2ErrorInterval
OBJECT-TYPE
Inspection interval for the number of SDH B2 error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.19Unsigned32read-writecurrent
hh3cIfMonCRCErrorLowThres
OBJECT-TYPE
Lower threshold for the number of CRC error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.20Unsigned32read-writecurrent
hh3cIfMonCRCErrorHighThres
OBJECT-TYPE
Upper threshold for the number of CRC error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.21Unsigned32read-writecurrent
hh3cIfMonCRCErrorInterval
OBJECT-TYPE
Inspection interval for the number of CRC error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.22Unsigned32read-writecurrent
hh3cIfMonCRCErrType
OBJECT-TYPE
Inspection type for the CRC error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.23INTEGER {absolute(1), ratio(2), invalid(65535)}read-writecurrent
hh3cIfMonRxPauseFrameLowThres
OBJECT-TYPE
Lower threshold for the number of received pause frames.
1.3.6.1.4.1.25506.2.40.5.2.1.1.24Unsigned32read-writecurrent
hh3cIfMonRxPauseFrameHighThres
OBJECT-TYPE
Upper threshold for the number of received pause frames.
1.3.6.1.4.1.25506.2.40.5.2.1.1.25Unsigned32read-writecurrent
hh3cIfMonRxPauseFrameInterval
OBJECT-TYPE
Inspection interval for the number of received pause frames.
1.3.6.1.4.1.25506.2.40.5.2.1.1.26Unsigned32read-writecurrent
hh3cIfMonTxPauseFrameLowThres
OBJECT-TYPE
Lower threshold for the number of transmitted pause frames.
1.3.6.1.4.1.25506.2.40.5.2.1.1.27Unsigned32read-writecurrent
hh3cIfMonTxPauseFrameHighThres
OBJECT-TYPE
Upper threshold for the number of transmitted pause frames.
1.3.6.1.4.1.25506.2.40.5.2.1.1.28Unsigned32read-writecurrent
hh3cIfMonTxPauseFrameInterval
OBJECT-TYPE
Inspection interval for the number of transmitted pause frames.
1.3.6.1.4.1.25506.2.40.5.2.1.1.29Unsigned32read-writecurrent
hh3cIfMonGiantLowThres
OBJECT-TYPE
Lower threshold for the number of Giant error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.30Unsigned32read-writecurrent
hh3cIfMonGiantHighThres
OBJECT-TYPE
Upper threshold for the number of Giant error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.31Unsigned32read-writecurrent
hh3cIfMonGiantInterval
OBJECT-TYPE
Inspection interval for the number of Giant error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.32Unsigned32read-writecurrent
hh3cIfMonRuntLowThres
OBJECT-TYPE
Lower threshold for the number of Runt error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.33Unsigned32read-writecurrent
hh3cIfMonRuntHighThres
OBJECT-TYPE
Upper threshold for the number of Runt error packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.34Unsigned32read-writecurrent
hh3cIfMonRuntInterval
OBJECT-TYPE
Inspection interval for the number of Runt packets.
1.3.6.1.4.1.25506.2.40.5.2.1.1.35Unsigned32read-writecurrent
hh3cIfMonAlarmDownEnableTable
OBJECT-TYPE
This table can set or get whether to enable the interface down function.
1.3.6.1.4.1.25506.2.40.5.2.2not-accessiblecurrent
hh3cIfMonAlarmDownEnableEntry
OBJECT-TYPE
Entry items
1.3.6.1.4.1.25506.2.40.5.2.2.1not-accessiblecurrent
hh3cIfMonInputErrorAlarmEnableDown
OBJECT-TYPE
When the number of inbound error packets exceeds the upper threshold, the physical interface goes down.
1.3.6.1.4.1.25506.2.40.5.2.2.1.1TruthValueread-writecurrent
hh3cIfMonOutputErrorAlarmEnableDown
OBJECT-TYPE
When the number of outbound error packets exceeds the upper threshold, the physical interface goes down.
1.3.6.1.4.1.25506.2.40.5.2.2.1.2TruthValueread-writecurrent
hh3cIfMonSdhErrorEnableDown
OBJECT-TYPE
When the number of SDH error packets exceeds the upper threshold, the physical interface goes down.
1.3.6.1.4.1.25506.2.40.5.2.2.1.3TruthValueread-writecurrent
hh3cIfMonSdhB1ErrorEnableDown
OBJECT-TYPE
When the number of SDH B1 error packets exceeds the upper threshold, the physical interface goes down.
1.3.6.1.4.1.25506.2.40.5.2.2.1.4TruthValueread-writecurrent
hh3cIfMonSdhB2ErrorEnableDown
OBJECT-TYPE
When the number of SDH B2 error packets exceeds the upper threshold, the physical interface goes down.
1.3.6.1.4.1.25506.2.40.5.2.2.1.5TruthValueread-writecurrent
hh3cIfMonCRCErrorEnableDown
OBJECT-TYPE
When the number of CRC error packets exceeds the upper threshold, the physical interface goes down.
1.3.6.1.4.1.25506.2.40.5.2.2.1.6TruthValueread-writecurrent
hh3cIfMonGiantEnableDown
OBJECT-TYPE
When the number of Giant error packets exceeds the upper threshold, the physical interface goes down.
1.3.6.1.4.1.25506.2.40.5.2.2.1.7TruthValueread-writecurrent
hh3cIfMonRuntEnableDown
OBJECT-TYPE
When the number of Runt error packets exceeds the upper threshold, the physical interface goes down.
1.3.6.1.4.1.25506.2.40.5.2.2.1.8TruthValueread-writecurrent
hh3cIfMonTrap
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.6
hh3cIfMonTrapPrex
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.6.0
hh3cIfMonTrapObject
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.40.6.1

Notifications

NameOIDStatus
hh3cIfBandwidthUsageHigh
NOTIFICATION-TYPE
The notification is generated when the rate of the bandwidth for the interface exceeds the upper limit.
1.3.6.1.4.1.25506.2.40.3.0.1current
hh3cIfDiscardPktRateHigh
NOTIFICATION-TYPE
The notification is generated when the rate of the discarded packets for the interface exceeds the upper limit.
1.3.6.1.4.1.25506.2.40.3.0.2current
hh3cIfDampeningSuppressed
NOTIFICATION-TYPE
The notification is generated when the interface is suppressed via dampening.
1.3.6.1.4.1.25506.2.40.3.0.3current
hh3cIfDampeningNotSuppressed
NOTIFICATION-TYPE
The notification is generated when the interface is resumed to not suppressed via dampening.
1.3.6.1.4.1.25506.2.40.3.0.4current
hh3cIfPortUp
NOTIFICATION-TYPE
The notification is generated when physical state of the interface changes to up.
1.3.6.1.4.1.25506.2.40.3.0.5current
hh3cIfPortDown
NOTIFICATION-TYPE
The notification is generated when physical state of the interface changes to down.
1.3.6.1.4.1.25506.2.40.3.0.6current
hh3cIfPfcOutRising
NOTIFICATION-TYPE
The notification is generated when the outbound rate exceeds the threshold for the dot1p value. If the hh3cIfPfcDot1pOutPpsThreshold is set to 0, no hh3cIfPfcOutRising will be generated.
1.3.6.1.4.1.25506.2.40.3.0.7current
hh3cIfPfcInRising
NOTIFICATION-TYPE
The notification is generated when the inbound rate exceeds the threshold for the dot1p value. If the hh3cIfPfcDot1pInPpsThreshold is set to 0, no hh3cIfPfcInRising will be generated.
1.3.6.1.4.1.25506.2.40.3.0.8current
hh3cIfMonInputUsageRising
NOTIFICATION-TYPE
The notification is generated when the inbound bandwidth usage exceeds the upper threshold.
1.3.6.1.4.1.25506.2.40.6.0.1current
hh3cIfMonInputUsageResume
NOTIFICATION-TYPE
The notification is generated when the inbound bandwidth usage drops from above the upper threshold to below the lower threshold.
1.3.6.1.4.1.25506.2.40.6.0.2current
hh3cIfMonOutputUsageRising
NOTIFICATION-TYPE
The notification is generated when the outbound bandwidth usage exceeds the upper threshold.
1.3.6.1.4.1.25506.2.40.6.0.3current
hh3cIfMonOutputUsageResume
NOTIFICATION-TYPE
The notification is generated when the outbound bandwidth usage drops from above the upper threshold to below the lower threshold.
1.3.6.1.4.1.25506.2.40.6.0.4current
hh3cIfMonInputErrorAlarmRising
NOTIFICATION-TYPE
The notification is generated when the number of inbound error packets exceeds the upper threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.5current
hh3cIfMonInputErrorAlarmResume
NOTIFICATION-TYPE
The notification is generated when the number of inbound error packets drops from above the upper threshold to below the lower threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.6current
hh3cIfMonOutputErrorAlarmRising
NOTIFICATION-TYPE
The notification is generated when the number of outbound error packets exceeds the upper threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.7current
hh3cIfMonOutputErrorAlarmResume
NOTIFICATION-TYPE
The notification is generated when the number of outbound error packets drops from above the upper threshold to below the lower threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.8current
hh3cIfMonSdhErrorRising
NOTIFICATION-TYPE
The notification is generated when the number of SDH error packets exceeds the upper threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.9current
hh3cIfMonSdhErrorResume
NOTIFICATION-TYPE
The notification is generated when the number of SDH error packets drops from above the upper threshold to below the lower threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.10current
hh3cIfMonSdhB1ErrorRising
NOTIFICATION-TYPE
The notification is generated when the number of SDH B1 error packets exceeds the upper threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.11current
hh3cIfMonSdhB1ErrorResume
NOTIFICATION-TYPE
The notification is generated when the number of SDH B1 error packets drops from above the upper threshold to below the lower threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.12current
hh3cIfMonSdhB2ErrorRising
NOTIFICATION-TYPE
The notification is generated when the number of SDH B2 error packets exceeds the upper threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.13current
hh3cIfMonSdhB2ErrorResume
NOTIFICATION-TYPE
The notification is generated when the number of SDH B2 error packets drops from above the upper threshold to below the lower threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.14current
hh3cIfMonCRCErrorRising
NOTIFICATION-TYPE
The notification is generated when the number of CRC error packets exceeds the upper threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.15current
hh3cIfMonCRCErrorResume
NOTIFICATION-TYPE
The notification is generated when the number of CRC error packets drops from above the upper threshold to below the lower threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.16current
hh3cIfMonRxPauseFrameRising
NOTIFICATION-TYPE
The notification is generated when the number of received pause frames exceeds the upper threshold.
1.3.6.1.4.1.25506.2.40.6.0.17current
hh3cIfMonRxPauseFrameResume
NOTIFICATION-TYPE
The notification is generated when the number of received pause frames drops from above the upper threshold to below the lower-threshold.
1.3.6.1.4.1.25506.2.40.6.0.18current
hh3cIfMonTxPauseFrameRising
NOTIFICATION-TYPE
The notification is generated when the number of transmitted pause frames exceeds the upper threshold.
1.3.6.1.4.1.25506.2.40.6.0.19current
hh3cIfMonTxPauseFrameResume
NOTIFICATION-TYPE
The notification is generated when the number of transmitted pause frames drops from above the upper threshold to below the lower threshold.
1.3.6.1.4.1.25506.2.40.6.0.20current
hh3cIfMonGiantRising
NOTIFICATION-TYPE
The notification is generated when the number of Giant error packets exceeds the upper threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.21current
hh3cIfMonGiantResume
NOTIFICATION-TYPE
The notification is generated when the number of Giant error packets drops from above the upper threshold to below the lower threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.22current
hh3cIfMonRuntRising
NOTIFICATION-TYPE
The notification is generated when the number of Runt error packets exceeds the upper threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.23current
hh3cIfMonRuntResume
NOTIFICATION-TYPE
The notification is generated when the number of Runt error packets drops from above the upper threshold to below the lower threshold within the default interval.
1.3.6.1.4.1.25506.2.40.6.0.24current