MIBs Depot

HH3C-FAILOVER-MIB

Registered at
1.3.6.1.4.1.25506.2.164
Last updated
2015-10-27 10:40
Organization
New H3C Tech. Co., Ltd.
Revisions
2015-10-27 10:40
Namespace
comware
Source file
HH3C-FAILOVER-MIB
Digest
sha256:48898e7acf730921a68761c38cfad20fed77f3bc5fd88da9fba672ba1dd20fae

Description

This MIB file is to provide the definition of failover group. Such as: 1. Configure Failover Groups for a device and display Failover Groups and their status. 2. Assign CPU to the Failover Group, and display their status. Failover Group: A failover group contains a primary node and a secondary node. When a failover group is referenced by a service module, the primary node processes services and backs up service data to the secondary node. The secondary node does not process services, but it takes over the services when the primary node fails. When the primary node is recovered, traffic is switched to the primary node again.

Contact

Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085

Imports

FromSymbols
HH3C-OID-MIBhh3cCommon
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HH3C-FAILOVER-MIB
HH3C-OID-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hh3cFailoverScalarObjects
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.164.1
hh3cFailoverMaxNum
OBJECT-TYPE
The maximum number of Failover groups which the system supported to create, does not include the AutoBackup.
1.3.6.1.4.1.25506.2.164.1.1Unsigned32read-onlycurrent
hh3cFailoverCurrentNum
OBJECT-TYPE
The current number of Failover groups which the system has created, does not include the AutoBackup.
1.3.6.1.4.1.25506.2.164.1.2Unsigned32read-onlycurrent
hh3cFailoverTables
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.164.2
hh3cFailoverCfgTable
OBJECT-TYPE
This table is for configuration of backup group.
1.3.6.1.4.1.25506.2.164.2.1not-accessiblecurrent
hh3cFailoverCfgEntry
OBJECT-TYPE
An entry of the hh3cFailoverGroupCfgTable.
1.3.6.1.4.1.25506.2.164.2.1.1not-accessiblecurrent
hh3cFailoverIndex
OBJECT-TYPE
Failover group ID is used as group index, the value range of failover group ID depends on the device model. The failover GroupIndex cannot be modified after creation.
1.3.6.1.4.1.25506.2.164.2.1.1.1Unsigned32 (0..4294967295)accessible-for-notifycurrent
hh3cFailoverName
OBJECT-TYPE
Specifies the backup group name, a case-sensitive string of 1 to 63 characters. The failover group name cannot be modified after creation. The name can not include '?', and can not begin or end with ' '.
1.3.6.1.4.1.25506.2.164.2.1.1.2DisplayString (SIZE(1..63))read-createcurrent
hh3cFailoverPrimaryChassisID
OBJECT-TYPE
Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. (Distributed devices In IRF mode.) On a centralized or distributed device, the value for this node is always zero. Note:The -1 for delete the node.
1.3.6.1.4.1.25506.2.164.2.1.1.3Integer32 (-1..255)read-createcurrent
hh3cFailoverPrimarySlotID
OBJECT-TYPE
Specifies a card by its slot number. (Distributed devices In standalone mode.) Note:The -1 for delete the node.
1.3.6.1.4.1.25506.2.164.2.1.1.4Integer32 (-1..255)read-createcurrent
hh3cFailoverPrimaryCpuID
OBJECT-TYPE
Specifies a CPU by its number. This option is available only if multiple CPUs are available on the specified slot. Note:The -1 for delete the node.
1.3.6.1.4.1.25506.2.164.2.1.1.5Integer32 (-1..7)read-createcurrent
hh3cFailoverSecondaryChassisID
OBJECT-TYPE
Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. (Distributed devices In IRF mode.) On a centralized or distributed device, the value for this node is always zero. Note:The -1 for delete the node.
1.3.6.1.4.1.25506.2.164.2.1.1.6Integer32 (-1..255)read-createcurrent
hh3cFailoverSecondarySlotID
OBJECT-TYPE
Specifies a card by its slot number. (Distributed devices In standalone mode.) Note:The -1 for delete the node.
1.3.6.1.4.1.25506.2.164.2.1.1.7Integer32 (-1..255)read-createcurrent
hh3cFailoverSecondaryCpuID
OBJECT-TYPE
Specifies a CPU by its number. This option is available only if multiple CPUs are available on the specified slot. Note:The -1 for delete the node.
1.3.6.1.4.1.25506.2.164.2.1.1.8Integer32 (-1..7)read-createcurrent
hh3cFailoverState
OBJECT-TYPE
Backup group state: Initial: No node in the failover group is processing services. Normal: The primary node is processing services. Fault: The secondary node is processing services.
1.3.6.1.4.1.25506.2.164.2.1.1.9INTEGER {initial(1), normal(2), fault(3)}read-onlycurrent
hh3cFailoverRowStatus
OBJECT-TYPE
The status of this table entry. Only support active(1), createAndGo(4) and destroy(6).
1.3.6.1.4.1.25506.2.164.2.1.1.10RowStatusread-createcurrent
hh3cFailoverNotification
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.164.3
hh3cFailoverTrap
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.164.3.0

Notifications

NameOIDStatus
hh3cFailoverCreate
NOTIFICATION-TYPE
The hh3cFailoverCreate trap indicates that the failover group has created.
1.3.6.1.4.1.25506.2.164.3.0.1current
hh3cFailoverDelete
NOTIFICATION-TYPE
The hh3cFailoverDelete trap indicates that the failover group has deleted.
1.3.6.1.4.1.25506.2.164.3.0.2current
hh3cFailoverPrimaryNodeAdd
NOTIFICATION-TYPE
The hh3cFailoverPrimaryNodeAdd trap indicates that the failover group has added the primary node.
1.3.6.1.4.1.25506.2.164.3.0.3current
hh3cFailoverPrimaryNodeRemove
NOTIFICATION-TYPE
The hh3cFailoverPrimaryNodeRemove trap indicates that the failover group has removed the primary node.
1.3.6.1.4.1.25506.2.164.3.0.4current
hh3cFailoverSecondaryNodeAdd
NOTIFICATION-TYPE
The hh3cFailoverSecondaryNodeAdd trap indicates that the failover group has added the secondary node.
1.3.6.1.4.1.25506.2.164.3.0.5current
hh3cFailoverSecondaryNodeRemove
NOTIFICATION-TYPE
The hh3cFailoverSecondaryNodeRemove trap indicates that the failover group has removed the secondary node.
1.3.6.1.4.1.25506.2.164.3.0.6current