MIBs Depot

HH3C-EPON-MIB

Registered at
1.3.6.1.4.1.25506.2.42.1
Last updated
2021-01-25 10:38
Organization
New H3C Technologies Co., Ltd.
Revisions
2021-01-25 10:38, 2019-07-10 10:38, 2019-07-08 10:49, 2018-11-28 10:49, 2017-03-06 11:45, 2017-02-10 11:45, 2015-08-04 11:45
Namespace
comware
Source file
HH3C-EPON-MIB
Digest
sha256:d7ffdd13e2449989bccb63cb1355c43e961ff5d9264001dc22b8881e8e6d9993

Description

The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..

Contact

Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085

Imports

FromSymbols
HH3C-LSW-DEV-ADM-MIBhh3cLswFrameIndex, hh3cLswSlotIndex
HH3C-OID-MIBhh3cEpon
IF-MIBifDescr, ifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HCNUM-TC
HH3C-EPON-MIB
HH3C-LSW-DEV-ADM-MIB
HH3C-OID-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hh3cEponSysMan
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.1
hh3cEponAutoAuthorize
OBJECT-TYPE
This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized.
1.3.6.1.4.1.25506.2.42.1.1.1TruthValueread-writecurrent
hh3cEponMonitorCycle
OBJECT-TYPE
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.
1.3.6.1.4.1.25506.2.42.1.1.2Integer32 (1..3600)read-writecurrent
hh3cEponMsgTimeOut
OBJECT-TYPE
Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
1.3.6.1.4.1.25506.2.42.1.1.3Integer32read-writecurrent
hh3cEponMsgLoseNum
OBJECT-TYPE
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
1.3.6.1.4.1.25506.2.42.1.1.4Integer32read-writecurrent
hh3cEponSysHasEPONBoard
OBJECT-TYPE
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
1.3.6.1.4.1.25506.2.42.1.1.5TruthValueread-onlycurrent
hh3cEponMonitorCycleEnable
OBJECT-TYPE
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
1.3.6.1.4.1.25506.2.42.1.1.6TruthValueread-writecurrent
hh3cEponOltSoftwareErrAlmEnable
OBJECT-TYPE
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.1.7TruthValueread-writecurrent
hh3cEponPortLoopBackAlmEnable
OBJECT-TYPE
LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.1.8TruthValueread-writecurrent
hh3cEponMonitorCycleMinVal
OBJECT-TYPE
The lower limit of cycle which be confined to the hh3cEponMonitorCycle.
1.3.6.1.4.1.25506.2.42.1.1.9Integer32read-onlycurrent
hh3cEponMonitorCycleMaxVal
OBJECT-TYPE
The upper limit of cycle which be confined to the hh3cEponMonitorCycle.
1.3.6.1.4.1.25506.2.42.1.1.10Integer32read-onlycurrent
hh3cEponMsgTimeOutMinVal
OBJECT-TYPE
The lower limit of timeout which be confined to the hh3cEponMsgTimeOut.
1.3.6.1.4.1.25506.2.42.1.1.11Integer32read-onlycurrent
hh3cEponMsgTimeOutMaxVal
OBJECT-TYPE
The upper limit of timeout which be confined to the hh3cEponMsgTimeOut.
1.3.6.1.4.1.25506.2.42.1.1.12Integer32read-onlycurrent
hh3cEponMsgLoseNumMinVal
OBJECT-TYPE
The lower limit of time which be confined to the hh3cEponMsgLoseNum.
1.3.6.1.4.1.25506.2.42.1.1.13Integer32read-onlycurrent
hh3cEponMsgLoseNumMaxVal
OBJECT-TYPE
The upper limit of time which be confined to the hh3cEponMsgLoseNum.
1.3.6.1.4.1.25506.2.42.1.1.14Integer32read-onlycurrent
hh3cEponSysScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.1.15
hh3cEponSysManTable
OBJECT-TYPE
This table defines system related parameters.
1.3.6.1.4.1.25506.2.42.1.1.16not-accessiblecurrent
hh3cEponSysManEntry
OBJECT-TYPE
The entry of the table hh3cEponSysManTable.
1.3.6.1.4.1.25506.2.42.1.1.16.1not-accessiblecurrent
hh3cEponSlotIndex
OBJECT-TYPE
Slot Index, the index of hh3cEponSysManTable.
1.3.6.1.4.1.25506.2.42.1.1.16.1.1Integer32not-accessiblecurrent
hh3cEponModeSwitch
OBJECT-TYPE
cmode - epon standard mode. hmode - private mode.
1.3.6.1.4.1.25506.2.42.1.1.16.1.2INTEGER {cmode(1), hmode(2)}read-writecurrent
hh3cEponAutomaticMode
OBJECT-TYPE
Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode.
1.3.6.1.4.1.25506.2.42.1.1.16.1.3INTEGER {enable(1), disable(2)}read-writecurrent
hh3cEponOamDiscoveryTimeout
OBJECT-TYPE
Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.
1.3.6.1.4.1.25506.2.42.1.1.16.1.4Integer32read-writecurrent
hh3cEponEncryptionNoReplyTimeOut
OBJECT-TYPE
Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.
1.3.6.1.4.1.25506.2.42.1.1.16.1.5Integer32read-writecurrent
hh3cEponEncryptionUpdateTime
OBJECT-TYPE
Encryption key update timer for all ONUs on slot, indicated by hh3cEponSlotIndex, ranging from 1 to 255, measured in seconds.
1.3.6.1.4.1.25506.2.42.1.1.16.1.6Integer32read-writecurrent
hh3cEponAutoBindStatus
OBJECT-TYPE
enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.
1.3.6.1.4.1.25506.2.42.1.1.16.1.7INTEGER {enable(1), disable(2)}read-writecurrent
hh3cEponAutoBindType
OBJECT-TYPE
Set auto binding type, which can be combined. If auto binding is disabled, 0 is returned.
1.3.6.1.4.1.25506.2.42.1.1.16.1.8Bits {mac(0), loid(1), loidPassword(2)}read-writecurrent
hh3cEponAutoUpdateTable
OBJECT-TYPE
EPON auto update ONU application configuration.
1.3.6.1.4.1.25506.2.42.1.1.17not-accessiblecurrent
hh3cEponAutoUpdateEntry
OBJECT-TYPE
The entry of the table hh3cEponAutoUpdateTable.
1.3.6.1.4.1.25506.2.42.1.1.17.1not-accessiblecurrent
hh3cEponAutoUpdateFileName
OBJECT-TYPE
The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.
1.3.6.1.4.1.25506.2.42.1.1.17.1.1DisplayString (SIZE(0..255))read-writecurrent
hh3cEponAutoUpdateSchedStatus
OBJECT-TYPE
The status of schedule update configuration. The hh3cEponAutoUpdateFileName must be set before enable hh3cEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.
1.3.6.1.4.1.25506.2.42.1.1.17.1.2INTEGER {enable(1), disable(2)}read-writecurrent
hh3cEponAutoUpdateSchedTime
OBJECT-TYPE
The schedule update timing configuration is related to the hh3cEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if hh3cEponAutoUpdateSchedStatus is enabled.
1.3.6.1.4.1.25506.2.42.1.1.17.1.3OCTET STRING (SIZE(0..255))read-writecurrent
hh3cEponAutoUpdateSchedType
OBJECT-TYPE
The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.
1.3.6.1.4.1.25506.2.42.1.1.17.1.4INTEGER {daily(1), weekly(2), comingdate(3)}read-writecurrent
hh3cEponAutoUpdateRealTimeStatus
OBJECT-TYPE
The status of real time update configuration. The hh3cEponAutoUpdateFileName must be set before enable hh3cEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.
1.3.6.1.4.1.25506.2.42.1.1.17.1.5INTEGER {enable(1), disable(2)}read-writecurrent
hh3cEponOuiIndexNextTable
OBJECT-TYPE
Next OUI index table.
1.3.6.1.4.1.25506.2.42.1.1.18not-accessiblecurrent
hh3cEponOuiIndexNextEntry
OBJECT-TYPE
The entry of the table hh3cEponOuiIndexNextTable.
1.3.6.1.4.1.25506.2.42.1.1.18.1not-accessiblecurrent
hh3cEponOuiIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for hh3cEponOuiIndex when creating rows in the hh3cEponOuiTable.
1.3.6.1.4.1.25506.2.42.1.1.18.1.1Integer32read-onlycurrent
hh3cEponOuiTable
OBJECT-TYPE
List of OUI and OAM supported by OLT.
1.3.6.1.4.1.25506.2.42.1.1.19not-accessiblecurrent
hh3cEponOuiEntry
OBJECT-TYPE
The entry of the table hh3cEponOuiTable.
1.3.6.1.4.1.25506.2.42.1.1.19.1not-accessiblecurrent
hh3cEponOuiIndex
OBJECT-TYPE
The index of this table.
1.3.6.1.4.1.25506.2.42.1.1.19.1.1Integer32not-accessiblecurrent
hh3cEponOuiValue
OBJECT-TYPE
OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.
1.3.6.1.4.1.25506.2.42.1.1.19.1.2OCTET STRING (SIZE(0..512))read-createcurrent
hh3cEponOamVersion
OBJECT-TYPE
Version of OAM protocol defined by the organization denoted by OUI.
1.3.6.1.4.1.25506.2.42.1.1.19.1.3OCTET STRING (SIZE(0..255))read-createcurrent
hh3cEponOuiRowStatus
OBJECT-TYPE
The status of this table entry. Only active, createAndGo, and destroy are supported.
1.3.6.1.4.1.25506.2.42.1.1.19.1.4RowStatusread-createcurrent
hh3cEponMulticastControlTable
OBJECT-TYPE
Multicast control global configuration.
1.3.6.1.4.1.25506.2.42.1.1.20not-accessiblecurrent
hh3cEponMulticastControlEntry
OBJECT-TYPE
The entry of the table hh3cEponMulticastControlTable.
1.3.6.1.4.1.25506.2.42.1.1.20.1not-accessiblecurrent
hh3cEponMulticastVlanId
OBJECT-TYPE
The index of this table.
1.3.6.1.4.1.25506.2.42.1.1.20.1.1Integer32not-accessiblecurrent
hh3cEponMulticastAddressList
OBJECT-TYPE
The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.
1.3.6.1.4.1.25506.2.42.1.1.20.1.2OCTET STRING (SIZE(0..255))read-createcurrent
hh3cEponMulticastStatus
OBJECT-TYPE
The status of this table entry. Only active, createAndGo, and destroy are supported.
1.3.6.1.4.1.25506.2.42.1.1.20.1.3RowStatusread-createcurrent
hh3cEponAuthMode
OBJECT-TYPE
Set global auth mode, which can be combined(loid and loid-password cannot be configured at the same time). If no auth mode was set, 0 is returned.
1.3.6.1.4.1.25506.2.42.1.1.21Bits {mac(0), loid(1), loidPassword(2)}read-writecurrent
hh3cEponOnuBindOneToOne
OBJECT-TYPE
Enable or disable one-to-one ONU binding feature. true(1) - feature enable. false(2) - feature disable.
1.3.6.1.4.1.25506.2.42.1.1.22TruthValueread-writecurrent
hh3cEponOnuBlackListMacTable
OBJECT-TYPE
The table contains the configurations for managing the ONU MAC blacklist.
1.3.6.1.4.1.25506.2.42.1.1.23not-accessiblecurrent
hh3cEponOnuBlackListMacEntry
OBJECT-TYPE
The entry of the table hh3cEponOnuBlackListMacTable.
1.3.6.1.4.1.25506.2.42.1.1.23.1not-accessiblecurrent
hh3cEponOnuBlackListMac
OBJECT-TYPE
The ONU MAC blacklist value. This value is used to specify the blacklist MAC which is bound by the ONU interface.
1.3.6.1.4.1.25506.2.42.1.1.23.1.1MacAddressread-onlycurrent
hh3cEponOnuBlackListMacRowStatus
OBJECT-TYPE
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
1.3.6.1.4.1.25506.2.42.1.1.23.1.2RowStatusread-createcurrent
hh3cEponOnuBlackListLoidTable
OBJECT-TYPE
The table contains the configurations for managing the ONU LOID blacklist.
1.3.6.1.4.1.25506.2.42.1.1.24not-accessiblecurrent
hh3cEponOnuBlackListLoidEntry
OBJECT-TYPE
The entry of the table hh3cEponOnuBlackListLoidTable.
1.3.6.1.4.1.25506.2.42.1.1.24.1not-accessiblecurrent
hh3cEponOnuBlackListLoid
OBJECT-TYPE
The ONU LOID blacklist value. This value is used to specify the blacklist LOID which is bound by the ONU interface.
1.3.6.1.4.1.25506.2.42.1.1.24.1.1OCTET STRING (SIZE(1..24))read-onlycurrent
hh3cEponOnuBlackListLoidRowStatus
OBJECT-TYPE
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
1.3.6.1.4.1.25506.2.42.1.1.24.1.2RowStatusread-createcurrent
hh3cEponFileName
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.2
hh3cEponDbaUpdateFileName
OBJECT-TYPE
The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path.
1.3.6.1.4.1.25506.2.42.1.2.1OCTET STRING (SIZE(0..64))read-writecurrent
hh3cEponOnuUpdateFileName
OBJECT-TYPE
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
1.3.6.1.4.1.25506.2.42.1.2.2OCTET STRING (SIZE(0..64))read-writecurrent
hh3cEponOltMan
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.3
hh3cOltSysManTable
OBJECT-TYPE
This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result
1.3.6.1.4.1.25506.2.42.1.3.1not-accessiblecurrent
hh3cOltSysManEntry
OBJECT-TYPE
The entry of the table hh3cOltSysManTable.
1.3.6.1.4.1.25506.2.42.1.3.1.1not-accessiblecurrent
hh3cOltLaserOnTime
OBJECT-TYPE
The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).
1.3.6.1.4.1.25506.2.42.1.3.1.1.1Integer32read-writecurrent
hh3cOltLaserOffTime
OBJECT-TYPE
The laser off time of the ONUs during the discovery process, measured in TQ.
1.3.6.1.4.1.25506.2.42.1.3.1.1.2Integer32read-writecurrent
hh3cOltMultiCopyBrdCast
OBJECT-TYPE
true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature.
1.3.6.1.4.1.25506.2.42.1.3.1.1.3TruthValueread-writecurrent
hh3cOltEnableDiscardPacket
OBJECT-TYPE
Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.
1.3.6.1.4.1.25506.2.42.1.3.1.1.4TruthValueread-writecurrent
hh3cOltSelfTest
OBJECT-TYPE
selftest(1): Test OLT to check whether it's OK.
1.3.6.1.4.1.25506.2.42.1.3.1.1.5INTEGER {selftest(1)}read-writecurrent
hh3cOltSelfTestResult
OBJECT-TYPE
The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.
1.3.6.1.4.1.25506.2.42.1.3.1.1.6INTEGER {other(1), ok(2), fail(3)}read-onlycurrent
hh3cOltMaxRtt
OBJECT-TYPE
Set the max Round Trip Time of this OLT.
1.3.6.1.4.1.25506.2.42.1.3.1.1.7Unsigned32read-writecurrent
hh3cOltAuthMode
OBJECT-TYPE
Set the auth mode of this OLT, which can be combined(loid and loid-password cannot be configured at the same time). If no auth mode was set, 0 is returned.
1.3.6.1.4.1.25506.2.42.1.3.1.1.8Bits {mac(0), loid(1), loidPassword(2)}read-writecurrent
hh3cOltOnuBindOneToOne
OBJECT-TYPE
Enable or disable one-to-one ONU binding feature. true(1) - feature enable. false(2) - feature disable.
1.3.6.1.4.1.25506.2.42.1.3.1.1.9TruthValueread-writecurrent
hh3cOltInfoTable
OBJECT-TYPE
Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (hh3cOltFirmMajorVersion, hh3cOltFirmMinorVersion, hh3cOltHardMajorVersion, hh3cOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (hh3cOltAgcLockTime, hh3cOltAgcCdrTime) (3)The operation(activation) status of an OLT. (hh3cOltMacAddress, hh3cOltWorkMode)
1.3.6.1.4.1.25506.2.42.1.3.2not-accessiblecurrent
hh3cOltInfoEntry
OBJECT-TYPE
The entry of the table hh3cOltInfoTable.
1.3.6.1.4.1.25506.2.42.1.3.2.1not-accessiblecurrent
hh3cOltFirmMajorVersion
OBJECT-TYPE
OLT firmware major version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.25506.2.42.1.3.2.1.1OCTET STRINGread-onlycurrent
hh3cOltFirmMinorVersion
OBJECT-TYPE
OLT firmware minor version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.25506.2.42.1.3.2.1.2OCTET STRINGread-onlycurrent
hh3cOltHardMajorVersion
OBJECT-TYPE
OLT hardware major version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.25506.2.42.1.3.2.1.3OCTET STRINGread-onlycurrent
hh3cOltHardMinorVersion
OBJECT-TYPE
OLT hardware minor version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.25506.2.42.1.3.2.1.4OCTET STRINGread-onlycurrent
hh3cOltAgcLockTime
OBJECT-TYPE
PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.
1.3.6.1.4.1.25506.2.42.1.3.2.1.5Integer32read-onlycurrent
hh3cOltAgcCdrTime
OBJECT-TYPE
PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value
1.3.6.1.4.1.25506.2.42.1.3.2.1.6Integer32read-onlycurrent
hh3cOltMacAddress
OBJECT-TYPE
OLT MAC address.
1.3.6.1.4.1.25506.2.42.1.3.2.1.7MacAddressread-onlycurrent
hh3cOltWorkMode
OBJECT-TYPE
The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.
1.3.6.1.4.1.25506.2.42.1.3.2.1.8INTEGER {other(1), open(2), reset(3), closed(4)}read-onlycurrent
hh3cOltOpticalPowerTx
OBJECT-TYPE
The optical power transmitted by this OLT. It measured in 0.01 dBm unit.
1.3.6.1.4.1.25506.2.42.1.3.2.1.9Integer32read-onlycurrent
hh3cOltOpticalPowerRx
OBJECT-TYPE
The burst optical power received by this OLT. It measured in 0.01 dBm unit.
1.3.6.1.4.1.25506.2.42.1.3.2.1.10Integer32read-onlycurrent
hh3cOltDbaManTable
OBJECT-TYPE
This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.
1.3.6.1.4.1.25506.2.42.1.3.3not-accessiblecurrent
hh3cOltDbaManEntry
OBJECT-TYPE
The entry of the table hh3cOltDbaManTable.
1.3.6.1.4.1.25506.2.42.1.3.3.1not-accessiblecurrent
hh3cOltDbaEnabledType
OBJECT-TYPE
Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source.
1.3.6.1.4.1.25506.2.42.1.3.3.1.1INTEGER {internal(1), external(2)}read-writecurrent
hh3cOltDbaDiscoveryLength
OBJECT-TYPE
Discovery length in TQ units.
1.3.6.1.4.1.25506.2.42.1.3.3.1.2Integer32read-writecurrent
hh3cOltDbaDiscovryFrequency
OBJECT-TYPE
How often should the OLT send discovery frames to the ONUs, measured in grant cycles.
1.3.6.1.4.1.25506.2.42.1.3.3.1.3Integer32read-writecurrent
hh3cOltDbaCycleLength
OBJECT-TYPE
The grant cycle length in TQ units.
1.3.6.1.4.1.25506.2.42.1.3.3.1.4Integer32read-writecurrent
hh3cOltDbaVersion
OBJECT-TYPE
DBA version of the OLT.
1.3.6.1.4.1.25506.2.42.1.3.3.1.5OCTET STRINGread-onlycurrent
hh3cOltDbaUpdate
OBJECT-TYPE
Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hh3cEponDbaUpdateFileName.
1.3.6.1.4.1.25506.2.42.1.3.3.1.6INTEGER {update(1)}read-writecurrent
hh3cOltDbaUpdateResult
OBJECT-TYPE
The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set.
1.3.6.1.4.1.25506.2.42.1.3.3.1.7INTEGER {other(1), ok(2), fail(3), fileNotExist(4), notSetFilename(5)}read-onlycurrent
hh3cOltPortAlarmThresholdTable
OBJECT-TYPE
The table defines the alarm threshold of OLT.
1.3.6.1.4.1.25506.2.42.1.3.4not-accessiblecurrent
hh3cOltPortAlarmThresholdEntry
OBJECT-TYPE
The entry of the table hh3cOltPortAlarmThresholdTable.
1.3.6.1.4.1.25506.2.42.1.3.4.1not-accessiblecurrent
hh3cOltPortAlarmBerEnabled
OBJECT-TYPE
Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.1TruthValueread-writecurrent
hh3cOltPortAlarmBerDirect
OBJECT-TYPE
Traffic direction to monitor for BER alarm.
1.3.6.1.4.1.25506.2.42.1.3.4.1.2INTEGER {berUplink(1), berDownlink(2), berAll(3)}read-writecurrent
hh3cOltPortAlarmBerThreshold
OBJECT-TYPE
BER threshold exceed which the alarm is raised.
1.3.6.1.4.1.25506.2.42.1.3.4.1.3Integer32read-writecurrent
hh3cOltPortAlarmFerEnabled
OBJECT-TYPE
Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.4TruthValueread-writecurrent
hh3cOltPortAlarmFerDirect
OBJECT-TYPE
Traffic direction to monitor for FER alarm.
1.3.6.1.4.1.25506.2.42.1.3.4.1.5INTEGER {ferUplink(1), ferDownlink(2), ferAll(3)}read-writecurrent
hh3cOltPortAlarmFerThreshold
OBJECT-TYPE
Frame error rate exceed threshold then the alarm is raised.
1.3.6.1.4.1.25506.2.42.1.3.4.1.6Integer32read-writecurrent
hh3cOltPortAlarmLlidMismatchEnabled
OBJECT-TYPE
Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.7TruthValueread-writecurrent
hh3cOltPortAlarmLlidMismatchThreshold
OBJECT-TYPE
The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.
1.3.6.1.4.1.25506.2.42.1.3.4.1.8Integer32read-writecurrent
hh3cOltPortAlarmRemoteStableEnabled
OBJECT-TYPE
Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.9TruthValueread-writecurrent
hh3cOltPortAlarmLocalStableEnabled
OBJECT-TYPE
Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.10TruthValueread-writecurrent
hh3cOltPortAlarmRegistrationEnabled
OBJECT-TYPE
Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.11TruthValueread-writecurrent
hh3cOltPortAlarmOamDisconnectionEnabled
OBJECT-TYPE
Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.12TruthValueread-writecurrent
hh3cOltPortAlarmEncryptionKeyEnabled
OBJECT-TYPE
Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.13TruthValueread-writecurrent
hh3cOltPortAlarmVendorSpecificEnabled
OBJECT-TYPE
Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.14TruthValueread-writecurrent
hh3cOltPortAlarmRegExcessEnabled
OBJECT-TYPE
Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.15TruthValueread-writecurrent
hh3cOltPortAlarmDFEEnabled
OBJECT-TYPE
Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.
1.3.6.1.4.1.25506.2.42.1.3.4.1.16TruthValueread-writecurrent
hh3cOltLaserOnTimeMinVal
OBJECT-TYPE
The lower limit of time which is confined to hh3cOltLaserOnTime.
1.3.6.1.4.1.25506.2.42.1.3.5Integer32read-onlycurrent
hh3cOltLaserOnTimeMaxVal
OBJECT-TYPE
The upper limit of time which is confined to hh3cOltLaserOnTime.
1.3.6.1.4.1.25506.2.42.1.3.6Integer32read-onlycurrent
hh3cOltLaserOffTimeMinVal
OBJECT-TYPE
The lower limit of time which is confined to hh3cOltLaserOffTime.
1.3.6.1.4.1.25506.2.42.1.3.7Integer32read-onlycurrent
hh3cOltLaserOffTimeMaxVal
OBJECT-TYPE
The upper limit of time which is confined to hh3cOltLaserOffTime.
1.3.6.1.4.1.25506.2.42.1.3.8Integer32read-onlycurrent
hh3cOltDbaDiscoveryLengthMinVal
OBJECT-TYPE
The lower limit of the discovery length which is confined to hh3cOltDbaDiscoveryLength.
1.3.6.1.4.1.25506.2.42.1.3.9Integer32read-onlycurrent
hh3cOltDbaDiscoveryLengthMaxVal
OBJECT-TYPE
The upper limit of the discovery length which is confined to hh3cOltDbaDiscoveryLength.
1.3.6.1.4.1.25506.2.42.1.3.10Integer32read-onlycurrent
hh3cOltDbaDiscovryFrequencyMinVal
OBJECT-TYPE
The lower limit of the discovery length which is confined to hh3cOltDbaDiscovryFrequency.
1.3.6.1.4.1.25506.2.42.1.3.11Integer32read-onlycurrent
hh3cOltDbaDiscovryFrequencyMaxVal
OBJECT-TYPE
The upper limit of the discovery length which is confined to hh3cOltDbaDiscovryFrequency.
1.3.6.1.4.1.25506.2.42.1.3.12Integer32read-onlycurrent
hh3cOltDbaCycleLengthMinVal
OBJECT-TYPE
The lower limit of the frames which is confined to hh3cOltDbaCycleLength.
1.3.6.1.4.1.25506.2.42.1.3.13Integer32read-onlycurrent
hh3cOltDbaCycleLengthMaxVal
OBJECT-TYPE
The upper limit of the frames which is confined to hh3cOltDbaCycleLength.
1.3.6.1.4.1.25506.2.42.1.3.14Integer32read-onlycurrent
hh3cOltPortAlarmLlidMisMinVal
OBJECT-TYPE
The lower limit of the frames which is confined to hh3cOltPortAlarmLlidMismatchThreshold.
1.3.6.1.4.1.25506.2.42.1.3.15Integer32read-onlycurrent
hh3cOltPortAlarmLlidMisMaxVal
OBJECT-TYPE
The upper limit of the frames which is confined to hh3cOltPortAlarmLlidMismatchThreshold.
1.3.6.1.4.1.25506.2.42.1.3.16Integer32read-onlycurrent
hh3cOltPortAlarmBerMinVal
OBJECT-TYPE
The lower limit of threshold which is confined to hh3cOltPortAlarmBerThreshold.
1.3.6.1.4.1.25506.2.42.1.3.17Integer32read-onlycurrent
hh3cOltPortAlarmBerMaxVal
OBJECT-TYPE
The upper limit of threshold which is confined to hh3cOltPortAlarmBerThreshold.
1.3.6.1.4.1.25506.2.42.1.3.18Integer32read-onlycurrent
hh3cOltPortAlarmFerMinVal
OBJECT-TYPE
The lower limit of threshold which is confined to hh3cOltPortAlarmFerThreshold.
1.3.6.1.4.1.25506.2.42.1.3.19Integer32read-onlycurrent
hh3cOltPortAlarmFerMaxVal
OBJECT-TYPE
The upper limit of threshold which is confined to hh3cOltPortAlarmFerThreshold.
1.3.6.1.4.1.25506.2.42.1.3.20Integer32read-onlycurrent
hh3cOnuSilentTable
OBJECT-TYPE
This table is used for getting silent ONU information of OLT.
1.3.6.1.4.1.25506.2.42.1.3.21not-accessiblecurrent
hh3cOnuSilentEntry
OBJECT-TYPE
The entry of the table hh3cOnuSilentTable.
1.3.6.1.4.1.25506.2.42.1.3.21.1not-accessiblecurrent
hh3cOnuSilentMacAddr
OBJECT-TYPE
The MAC address of silent ONUs in OLT.
1.3.6.1.4.1.25506.2.42.1.3.21.1.1MacAddressnot-accessiblecurrent
hh3cOnuSilentTime
OBJECT-TYPE
The aging time of a silent ONU.
1.3.6.1.4.1.25506.2.42.1.3.21.1.2Integer32read-onlycurrent
hh3cOltUsingOnuTable
OBJECT-TYPE
The table containing configurations to manage ONU interface(s) based on OLT interface.
1.3.6.1.4.1.25506.2.42.1.3.22not-accessiblecurrent
hh3cOltUsingOnuEntry
OBJECT-TYPE
The entry of the table hh3cOltUsingOnuTable.
1.3.6.1.4.1.25506.2.42.1.3.22.1not-accessiblecurrent
hh3cOltUsingOnuNum
OBJECT-TYPE
The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.
1.3.6.1.4.1.25506.2.42.1.3.22.1.1Integer32 (1..128)not-accessiblecurrent
hh3cOltUsingOnuIfIndex
OBJECT-TYPE
The ifIndex of the ONU interface.
1.3.6.1.4.1.25506.2.42.1.3.22.1.2Integer32read-onlycurrent
hh3cOltUsingOnuRowStatus
OBJECT-TYPE
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
1.3.6.1.4.1.25506.2.42.1.3.22.1.3RowStatusread-createcurrent
hh3cOnuSilentLoidTable
OBJECT-TYPE
This table is used for getting silent ONU's LOID information of an OLT.
1.3.6.1.4.1.25506.2.42.1.3.23not-accessiblecurrent
hh3cOnuSilentLoidEntry
OBJECT-TYPE
The entry of the table hh3cOnuSilentLoidTable.
1.3.6.1.4.1.25506.2.42.1.3.23.1not-accessiblecurrent
hh3cOnuSilentLoid
OBJECT-TYPE
The LOID of a silent ONU in an OLT.
1.3.6.1.4.1.25506.2.42.1.3.23.1.1OCTET STRING (SIZE(1..24))not-accessiblecurrent
hh3cOnuSilentLoidTime
OBJECT-TYPE
The aging time of a silent ONU.
1.3.6.1.4.1.25506.2.42.1.3.23.1.2Integer32read-onlycurrent
hh3cOltTransceiverTxPowerTable
OBJECT-TYPE
This table is used for setting ONU's Tx power on an OLT.
1.3.6.1.4.1.25506.2.42.1.3.24not-accessiblecurrent
hh3cOltTransceiverTxPowerEntry
OBJECT-TYPE
The entry of the table hh3cOltTransceiverTxPowerTable.
1.3.6.1.4.1.25506.2.42.1.3.24.1not-accessiblecurrent
hh3cOltTransTxPwrTransId
OBJECT-TYPE
The transceiver ID of an ONU in an OLT.
1.3.6.1.4.1.25506.2.42.1.3.24.1.1INTEGER {main(0), standby(1), all(2)}read-writecurrent
hh3cOltTransTxPwrOffTime
OBJECT-TYPE
The turnoff time of the transceiver Tx power.
1.3.6.1.4.1.25506.2.42.1.3.24.1.2Unsigned32read-writecurrent
hh3cOltTransTxPwrIsAllOnu
OBJECT-TYPE
Setting all ONUs' transceiver Tx power or not.
1.3.6.1.4.1.25506.2.42.1.3.24.1.3TruthValueread-writecurrent
hh3cOltTransTxPwrOnuIfList
OBJECT-TYPE
ONUs' ifIndex for which the transceiver Tx power is to be set.
1.3.6.1.4.1.25506.2.42.1.3.24.1.4OCTET STRING (SIZE(0..20))read-writecurrent
hh3cEponOnuMan
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.5
hh3cOnuSysManTable
OBJECT-TYPE
This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator.
1.3.6.1.4.1.25506.2.42.1.5.1not-accessiblecurrent
hh3cOnuSysManEntry
OBJECT-TYPE
The entry of the table hh3cOnuSysManTable.
1.3.6.1.4.1.25506.2.42.1.5.1.1not-accessiblecurrent
hh3cOnuEncryptMan
OBJECT-TYPE
Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic.
1.3.6.1.4.1.25506.2.42.1.5.1.1.1INTEGER {off(1), downlink(2), updownlink(3)}read-writecurrent
hh3cOnuReAuthorize
OBJECT-TYPE
Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server.
1.3.6.1.4.1.25506.2.42.1.5.1.1.2INTEGER {reAuthorize(1)}read-writecurrent
hh3cOnuMulticastFilterStatus
OBJECT-TYPE
true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.
1.3.6.1.4.1.25506.2.42.1.5.1.1.3TruthValueread-writecurrent
hh3cOnuDbaReportQueueSetNumber
OBJECT-TYPE
The number of queue sets reported in MPCP report frames.
1.3.6.1.4.1.25506.2.42.1.5.1.1.4Integer32read-writecurrent
hh3cOnuRemoteFecStatus
OBJECT-TYPE
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction.
1.3.6.1.4.1.25506.2.42.1.5.1.1.5INTEGER {enable(1), disable(2)}read-writecurrent
hh3cOnuPortBerStatus
OBJECT-TYPE
enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.
1.3.6.1.4.1.25506.2.42.1.5.1.1.6INTEGER {enable(1), disable(2)}read-writecurrent
hh3cOnuReset
OBJECT-TYPE
Reboot ONU.
1.3.6.1.4.1.25506.2.42.1.5.1.1.7INTEGER {reset(1)}read-writecurrent
hh3cOnuMulticastControlMode
OBJECT-TYPE
igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.
1.3.6.1.4.1.25506.2.42.1.5.1.1.8INTEGER {igmpsnooping(1), multicastcontrol(2)}read-writecurrent
hh3cOnuAccessVlan
OBJECT-TYPE
The VLAN ID assigned to untagged frames received on ONU.
1.3.6.1.4.1.25506.2.42.1.5.1.1.9Integer32read-writecurrent
hh3cOnuEncryptKey
OBJECT-TYPE
The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.
1.3.6.1.4.1.25506.2.42.1.5.1.1.10DisplayString (SIZE(0..255))read-writecurrent
hh3cOnuUniUpDownTrapStatus
OBJECT-TYPE
true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.
1.3.6.1.4.1.25506.2.42.1.5.1.1.11TruthValueread-writecurrent
hh3cOnuFecStatus
OBJECT-TYPE
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction.
1.3.6.1.4.1.25506.2.42.1.5.1.1.12INTEGER {enable(1), disable(2)}read-writecurrent
hh3cOnuMcastCtrlHostAgingTime
OBJECT-TYPE
The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.
1.3.6.1.4.1.25506.2.42.1.5.1.1.13Integer32read-writecurrent
hh3cOnuMulticastFastLeaveEnable
OBJECT-TYPE
true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.
1.3.6.1.4.1.25506.2.42.1.5.1.1.14TruthValueread-writecurrent
hh3cOnuPortIsolateEnable
OBJECT-TYPE
true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.
1.3.6.1.4.1.25506.2.42.1.5.1.1.15TruthValueread-writecurrent
hh3cOnuMacAddressTimer
OBJECT-TYPE
no-aging(0) - Disable aging. others - Aging time(seconds).
1.3.6.1.4.1.25506.2.42.1.5.1.1.16Unsigned32read-writecurrent
hh3cOnuLinkTestTable
OBJECT-TYPE
LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames.
1.3.6.1.4.1.25506.2.42.1.5.2not-accessiblecurrent
hh3cOnuLinkTestEntry
OBJECT-TYPE
The entry of hh3cOnuLinkTestEntry.
1.3.6.1.4.1.25506.2.42.1.5.2.1not-accessiblecurrent
hh3cOnuLinkTestFrameNum
OBJECT-TYPE
Exact number of measurement frames.
1.3.6.1.4.1.25506.2.42.1.5.2.1.1Integer32read-writecurrent
hh3cOnuLinkTestFrameSize
OBJECT-TYPE
Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 .
1.3.6.1.4.1.25506.2.42.1.5.2.1.2Integer32 (60..1514)read-writecurrent
hh3cOnuLinkTestDelay
OBJECT-TYPE
true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement.
1.3.6.1.4.1.25506.2.42.1.5.2.1.3TruthValueread-writecurrent
hh3cOnuLinkTestVlanTag
OBJECT-TYPE
true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.
1.3.6.1.4.1.25506.2.42.1.5.2.1.4TruthValueread-writecurrent
hh3cOnuLinkTestVlanPriority
OBJECT-TYPE
VLAN priority: 0-7.
1.3.6.1.4.1.25506.2.42.1.5.2.1.5Integer32 (0..7)read-writecurrent
hh3cOnuLinkTestVlanTagID
OBJECT-TYPE
VLAN ID: 1-4094.
1.3.6.1.4.1.25506.2.42.1.5.2.1.6Integer32 (1..4094)read-writecurrent
hh3cOnuLinkTestResultSentFrameNum
OBJECT-TYPE
The total number of frames sent during the link test process.
1.3.6.1.4.1.25506.2.42.1.5.2.1.7Integer32read-onlycurrent
hh3cOnuLinkTestResultRetFrameNum
OBJECT-TYPE
The total number of frames return back during the link test process.
1.3.6.1.4.1.25506.2.42.1.5.2.1.8Integer32read-onlycurrent
hh3cOnuLinkTestResultRetErrFrameNum
OBJECT-TYPE
The total number of error frames return back during the link test process.
1.3.6.1.4.1.25506.2.42.1.5.2.1.9Integer32read-onlycurrent
hh3cOnuLinkTestResultMinDelay
OBJECT-TYPE
The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true.
1.3.6.1.4.1.25506.2.42.1.5.2.1.10Integer32read-onlycurrent
hh3cOnuLinkTestResultMeanDelay
OBJECT-TYPE
The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true.
1.3.6.1.4.1.25506.2.42.1.5.2.1.11Integer32read-onlycurrent
hh3cOnuLinkTestResultMaxDelay
OBJECT-TYPE
The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true.
1.3.6.1.4.1.25506.2.42.1.5.2.1.12Integer32read-onlycurrent
hh3cOnuBandWidthTable
OBJECT-TYPE
Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection.
1.3.6.1.4.1.25506.2.42.1.5.3not-accessiblecurrent
hh3cOnuBandWidthEntry
OBJECT-TYPE
The entry of table hh3cOnuBandWidthTable.
1.3.6.1.4.1.25506.2.42.1.5.3.1not-accessiblecurrent
hh3cOnuDownStreamBandWidthPolicy
OBJECT-TYPE
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
1.3.6.1.4.1.25506.2.42.1.5.3.1.1TruthValueread-writecurrent
hh3cOnuDownStreamMaxBandWidth
OBJECT-TYPE
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
1.3.6.1.4.1.25506.2.42.1.5.3.1.2Integer32read-writecurrent
hh3cOnuDownStreamMaxBurstSize
OBJECT-TYPE
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
1.3.6.1.4.1.25506.2.42.1.5.3.1.3Integer32 (0..8388480)read-writecurrent
hh3cOnuDownStreamHighPriorityFirst
OBJECT-TYPE
true:Enable high priority frames preference. false:Disable high priority frames preference.
1.3.6.1.4.1.25506.2.42.1.5.3.1.4TruthValueread-writecurrent
hh3cOnuDownStreamShortFrameFirst
OBJECT-TYPE
true:Enable short frames preference. false:Disable short frames preference.
1.3.6.1.4.1.25506.2.42.1.5.3.1.5TruthValueread-writecurrent
hh3cOnuP2PBandWidthPolicy
OBJECT-TYPE
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
1.3.6.1.4.1.25506.2.42.1.5.3.1.6TruthValueread-writecurrent
hh3cOnuP2PMaxBandWidth
OBJECT-TYPE
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
1.3.6.1.4.1.25506.2.42.1.5.3.1.7Integer32 (0..1000000)read-writecurrent
hh3cOnuP2PMaxBurstSize
OBJECT-TYPE
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
1.3.6.1.4.1.25506.2.42.1.5.3.1.8Integer32 (0..8388480)read-writecurrent
hh3cOnuP2PHighPriorityFirst
OBJECT-TYPE
true:Enable high priority frames preference. false:Disable high priority frames preference.
1.3.6.1.4.1.25506.2.42.1.5.3.1.9TruthValueread-writecurrent
hh3cOnuP2PShortFrameFirst
OBJECT-TYPE
true:Enable short frames preference. false:Disable short frames preference.
1.3.6.1.4.1.25506.2.42.1.5.3.1.10TruthValueread-writecurrent
hh3cOnuSlaManTable
OBJECT-TYPE
Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm.
1.3.6.1.4.1.25506.2.42.1.5.4not-accessiblecurrent
hh3cOnuSlaManEntry
OBJECT-TYPE
The entry of table hh3cOnuSlaManTable.
1.3.6.1.4.1.25506.2.42.1.5.4.1not-accessiblecurrent
hh3cOnuSlaMaxBandWidth
OBJECT-TYPE
Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.
1.3.6.1.4.1.25506.2.42.1.5.4.1.1Integer32read-writecurrent
hh3cOnuSlaMinBandWidth
OBJECT-TYPE
Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.
1.3.6.1.4.1.25506.2.42.1.5.4.1.2Integer32read-writecurrent
hh3cOnuSlaBandWidthStepVal
OBJECT-TYPE
Granularity of bandwidth - measured in Kbit/s. The value of hh3cOnuSlaMaxBandWidth and hh3cOnuSlaMinBandWidth should be the multiple of the value of this object.
1.3.6.1.4.1.25506.2.42.1.5.4.1.3Integer32read-onlycurrent
hh3cOnuSlaDelay
OBJECT-TYPE
low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.
1.3.6.1.4.1.25506.2.42.1.5.4.1.4INTEGER {low(1), high(2)}read-writecurrent
hh3cOnuSlaFixedBandWidth
OBJECT-TYPE
Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal.
1.3.6.1.4.1.25506.2.42.1.5.4.1.5Integer32read-writecurrent
hh3cOnuSlaPriorityClass
OBJECT-TYPE
Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.
1.3.6.1.4.1.25506.2.42.1.5.4.1.6Integer32read-writecurrent
hh3cOnuSlaFixedPacketSize
OBJECT-TYPE
Fixed packet size - measured in byte. The value of this object should be valid when hh3cOnuSlaFixedBandWidth is configured.
1.3.6.1.4.1.25506.2.42.1.5.4.1.7Integer32read-writecurrent
hh3cOnuSlaWrrBandWidth
OBJECT-TYPE
The WRR weight will be used to compute the remaining bandwidth allocation after each CIR has been guaranteed.
1.3.6.1.4.1.25506.2.42.1.5.4.1.8Integer32read-writecurrent
hh3cOnuInfoTable
OBJECT-TYPE
Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (hh3cOnuHardMajorVersion, hh3cOnuHardMinorVersion, hh3cOnuUniMacType) (2)Several physical capabilities of the ONU. (hh3cOnuLaserOnTime, hh3cOnuLaserOffTime, hh3cOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (hh3cOnuWorkMode)
1.3.6.1.4.1.25506.2.42.1.5.5not-accessiblecurrent
hh3cOnuInfoEntry
OBJECT-TYPE
The entry of the hh3cOnuInfoTable.
1.3.6.1.4.1.25506.2.42.1.5.5.1not-accessiblecurrent
hh3cOnuHardMajorVersion
OBJECT-TYPE
ONU hardware major version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.25506.2.42.1.5.5.1.1OCTET STRINGread-onlycurrent
hh3cOnuHardMinorVersion
OBJECT-TYPE
ONU hardware minor version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.25506.2.42.1.5.5.1.2OCTET STRINGread-onlycurrent
hh3cOnuSoftwareVersion
OBJECT-TYPE
ONU software version.
1.3.6.1.4.1.25506.2.42.1.5.5.1.3OCTET STRINGread-onlycurrent
hh3cOnuUniMacType
OBJECT-TYPE
ONU User Network Interface(UNI) port MAC type.
1.3.6.1.4.1.25506.2.42.1.5.5.1.4INTEGER {other(1), mii(2), gmii(3), tbi(4)}read-onlycurrent
hh3cOnuLaserOnTime
OBJECT-TYPE
The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hh3cOnuLaserOnTime is unknown.
1.3.6.1.4.1.25506.2.42.1.5.5.1.5Integer32read-onlycurrent
hh3cOnuLaserOffTime
OBJECT-TYPE
The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hh3cOnuLaserOffTime is unknown.
1.3.6.1.4.1.25506.2.42.1.5.5.1.6Integer32read-onlycurrent
hh3cOnuGrantFifoDep
OBJECT-TYPE
Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.
1.3.6.1.4.1.25506.2.42.1.5.5.1.7Integer32 (1..255 | 2147483647)read-onlycurrent
hh3cOnuWorkMode
OBJECT-TYPE
The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network.
1.3.6.1.4.1.25506.2.42.1.5.5.1.8INTEGER {other(1), on(2), pending(3), off(4)}read-onlycurrent
hh3cOnuPCBVersion
OBJECT-TYPE
ONU PCB version.
1.3.6.1.4.1.25506.2.42.1.5.5.1.9OCTET STRINGread-onlycurrent
hh3cOnuRtt
OBJECT-TYPE
The signal round-trip-time(RTT) received.
1.3.6.1.4.1.25506.2.42.1.5.5.1.10Unsigned32read-onlycurrent
hh3cOnuEEPROMVersion
OBJECT-TYPE
ONU EEPROM version.
1.3.6.1.4.1.25506.2.42.1.5.5.1.11OCTET STRINGread-onlycurrent
hh3cOnuRegType
OBJECT-TYPE
ONU registered type.
1.3.6.1.4.1.25506.2.42.1.5.5.1.12OCTET STRINGread-onlycurrent
hh3cOnuHostType
OBJECT-TYPE
ONU host type.
1.3.6.1.4.1.25506.2.42.1.5.5.1.13OCTET STRINGread-onlycurrent
hh3cOnuDistance
OBJECT-TYPE
The distance between OLT and ONU, measured in meter.
1.3.6.1.4.1.25506.2.42.1.5.5.1.14Integer32read-onlycurrent
hh3cOnuLlid
OBJECT-TYPE
The link layer identifier, which uniquely identifies the ONU of a specific OLT.
1.3.6.1.4.1.25506.2.42.1.5.5.1.15Integer32read-onlycurrent
hh3cOnuVendorId
OBJECT-TYPE
ONU vendor ID.
1.3.6.1.4.1.25506.2.42.1.5.5.1.16OCTET STRINGread-onlycurrent
hh3cOnuFirmwareVersion
OBJECT-TYPE
ONU firmware version.
1.3.6.1.4.1.25506.2.42.1.5.5.1.17OCTET STRINGread-onlycurrent
hh3cOnuOpticalPowerReceivedByOlt
OBJECT-TYPE
The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.
1.3.6.1.4.1.25506.2.42.1.5.5.1.18Integer32read-onlycurrent
hh3cOnuInfoMac
OBJECT-TYPE
ONU's MAC.
1.3.6.1.4.1.25506.2.42.1.5.5.1.19MacAddressread-onlycurrent
hh3cOnuInfoLoid
OBJECT-TYPE
ONU's LOID.
1.3.6.1.4.1.25506.2.42.1.5.5.1.20OCTET STRING (SIZE(0..24))read-onlycurrent
hh3cOnuMacAddrInfoTable
OBJECT-TYPE
This table used for getting MAC address information of ONU.
1.3.6.1.4.1.25506.2.42.1.5.6not-accessiblecurrent
hh3cOnuMacAddrInfoEntry
OBJECT-TYPE
The entry of the hh3cEponOnuMacAddrInfoTable.
1.3.6.1.4.1.25506.2.42.1.5.6.1not-accessiblecurrent
hh3cOnuMacIndex
OBJECT-TYPE
The index of ONUs in one OLT.
1.3.6.1.4.1.25506.2.42.1.5.6.1.1Integer32not-accessiblecurrent
hh3cOnuMacAddrFlag
OBJECT-TYPE
The flag of ONU status. 1 - bound: The ONU is bound but not registered. 2 - registered: The ONU is registered but not bound. 3 - run: The ONU is registered and bound on one OLT. 4 - regIncorrect: The ONU is bound on one OLT and registered on another OLT.
1.3.6.1.4.1.25506.2.42.1.5.6.1.2INTEGER {bound(1), registered(2), run(3), regIncorrect(4)}read-onlycurrent
hh3cOnuMacAddress
OBJECT-TYPE
The MAC address of ONU.
1.3.6.1.4.1.25506.2.42.1.5.6.1.3MacAddressread-onlycurrent
hh3cOnuBindMacAddrTable
OBJECT-TYPE
This table implements the following functions for ONUs: Bind MAC of ONU.
1.3.6.1.4.1.25506.2.42.1.5.7not-accessiblecurrent
hh3cOnuBindMacAddrEntry
OBJECT-TYPE
The entry of the table hh3cOnuBindMacAddrTable.
1.3.6.1.4.1.25506.2.42.1.5.7.1not-accessiblecurrent
hh3cOnuBindMacAddress
OBJECT-TYPE
Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values.
1.3.6.1.4.1.25506.2.42.1.5.7.1.1MacAddressread-writecurrent
hh3cOnuBindType
OBJECT-TYPE
Set the binding type with the ONU which is confined to the index of hh3cEponOnuTypeDescr.
1.3.6.1.4.1.25506.2.42.1.5.7.1.2Integer32read-writecurrent
hh3cOnuBindLoid
OBJECT-TYPE
Bind the LOID of ONU. While the LOID is not bound, the ONU can not go into effect and configurations can not be set.
1.3.6.1.4.1.25506.2.42.1.5.7.1.3OCTET STRING (SIZE(0..24))read-writecurrent
hh3cOnuBindPassword
OBJECT-TYPE
The password of LOID by using LOID-PASSWORD binding type to bind ONU. A zero-length string will be returned when reading.
1.3.6.1.4.1.25506.2.42.1.5.7.1.4OCTET STRING (SIZE(0..12))read-writecurrent
hh3cOnuFirmwareUpdateTable
OBJECT-TYPE
This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware.
1.3.6.1.4.1.25506.2.42.1.5.8not-accessiblecurrent
hh3cOnuFirmwareUpdateEntry
OBJECT-TYPE
The entry of the table hh3cOnuFirmwareUpdateTable.
1.3.6.1.4.1.25506.2.42.1.5.8.1not-accessiblecurrent
hh3cOnuUpdate
OBJECT-TYPE
update(1): Update the ONU firmware. Config the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
1.3.6.1.4.1.25506.2.42.1.5.8.1.1INTEGER {update(1)}read-writecurrent
hh3cOnuUpdateResult
OBJECT-TYPE
The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown.
1.3.6.1.4.1.25506.2.42.1.5.8.1.2INTEGER {updating(1), ok(2), fail(3), fileNotExist(4), notSetFilename(5), fileNotMatchONU(6), timeout(7), otherError(8)}read-onlycurrent
hh3cOnuUpdateFileName
OBJECT-TYPE
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
1.3.6.1.4.1.25506.2.42.1.5.8.1.3OCTET STRING (SIZE(0..255))read-writecurrent
hh3cOnuUpdateProtType
OBJECT-TYPE
private(0): Using private protocol to update the ONU firmware. ctc(1): Using ctc standard protocol to update the ONU firmware.
1.3.6.1.4.1.25506.2.42.1.5.8.1.4INTEGER {private(0), ctc(1)}read-writecurrent
hh3cOnuUpdateStartTime
OBJECT-TYPE
The start time of the ONU update every day. Using HH:MM as format.
1.3.6.1.4.1.25506.2.42.1.5.8.1.5OCTET STRING (SIZE(0..5))read-writecurrent
hh3cOnuUpdateDuration
OBJECT-TYPE
The duration of the ONU update.
1.3.6.1.4.1.25506.2.42.1.5.8.1.6Integer32 (0..1439)read-writecurrent
hh3cOnuLinkTestFrameNumMinVal
OBJECT-TYPE
The lower limit of measurement frames which is confined to hh3cOnuLinkTestFrameNum.
1.3.6.1.4.1.25506.2.42.1.5.9Integer32read-onlycurrent
hh3cOnuLinkTestFrameNumMaxVal
OBJECT-TYPE
The upper limit of measurement frames which is confined to hh3cOnuLinkTestFrameNum.
1.3.6.1.4.1.25506.2.42.1.5.10Integer32read-onlycurrent
hh3cOnuSlaMaxBandWidthMinVal
OBJECT-TYPE
The lower limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth.
1.3.6.1.4.1.25506.2.42.1.5.11Integer32read-onlycurrent
hh3cOnuSlaMaxBandWidthMaxVal
OBJECT-TYPE
The upper limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth.
1.3.6.1.4.1.25506.2.42.1.5.12Integer32read-onlycurrent
hh3cOnuSlaMinBandWidthMinVal
OBJECT-TYPE
The lower limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth.
1.3.6.1.4.1.25506.2.42.1.5.13Integer32read-onlycurrent
hh3cOnuSlaMinBandWidthMaxVal
OBJECT-TYPE
The upper limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth.
1.3.6.1.4.1.25506.2.42.1.5.14Integer32read-onlycurrent
hh3cEponOnuTypeManTable
OBJECT-TYPE
This table is used for getting ONU bind type in current version.
1.3.6.1.4.1.25506.2.42.1.5.15not-accessiblecurrent
hh3cEponOnuTypeManEntry
OBJECT-TYPE
The entry of the hh3cEponOnuTypeManTable.
1.3.6.1.4.1.25506.2.42.1.5.15.1not-accessiblecurrent
hh3cEponOnuTypeIndex
OBJECT-TYPE
The ONU type index.
1.3.6.1.4.1.25506.2.42.1.5.15.1.1Integer32not-accessiblecurrent
hh3cEponOnuTypeDescr
OBJECT-TYPE
The ONU type description which can be used to bind ONU in current version. the value of hh3cOnuBindType can be configured by the index of hh3cEponOnuTypeDescr.
1.3.6.1.4.1.25506.2.42.1.5.15.1.2OCTET STRINGread-onlycurrent
hh3cOnuPacketManTable
OBJECT-TYPE
This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode.
1.3.6.1.4.1.25506.2.42.1.5.16not-accessiblecurrent
hh3cOnuPacketManEntry
OBJECT-TYPE
The entry of the hh3cOnuPacketManTable.
1.3.6.1.4.1.25506.2.42.1.5.16.1not-accessiblecurrent
hh3cOnuPriorityTrust
OBJECT-TYPE
The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.
1.3.6.1.4.1.25506.2.42.1.5.16.1.1INTEGER {dscp(1), ipprecedence(2), cos(3)}read-writecurrent
hh3cOnuQueueScheduler
OBJECT-TYPE
The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.
1.3.6.1.4.1.25506.2.42.1.5.16.1.2INTEGER {spq(1), wfq(2)}read-writecurrent
hh3cOnuProtocolTable
OBJECT-TYPE
This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping.
1.3.6.1.4.1.25506.2.42.1.5.17not-accessiblecurrent
hh3cOnuProtocolEntry
OBJECT-TYPE
The entry of hh3cOnuProtocolTable.
1.3.6.1.4.1.25506.2.42.1.5.17.1not-accessiblecurrent
hh3cOnuStpStatus
OBJECT-TYPE
true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.
1.3.6.1.4.1.25506.2.42.1.5.17.1.1TruthValueread-writecurrent
hh3cOnuIgmpSnoopingStatus
OBJECT-TYPE
true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.
1.3.6.1.4.1.25506.2.42.1.5.17.1.2TruthValueread-writecurrent
hh3cOnuDhcpsnoopingOption82
OBJECT-TYPE
true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.
1.3.6.1.4.1.25506.2.42.1.5.17.1.3TruthValueread-writecurrent
hh3cOnuDhcpsnooping
OBJECT-TYPE
true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.
1.3.6.1.4.1.25506.2.42.1.5.17.1.4TruthValueread-writecurrent
hh3cOnuPppoe
OBJECT-TYPE
true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.
1.3.6.1.4.1.25506.2.42.1.5.17.1.5TruthValueread-writecurrent
hh3cOnuIgmpSnoopingHostAgingT
OBJECT-TYPE
Set the host aging time of IGMP on ONU.
1.3.6.1.4.1.25506.2.42.1.5.17.1.6Integer32read-writecurrent
hh3cOnuIgmpSnoopingMaxRespT
OBJECT-TYPE
Set the max response time of IGMP on ONU.
1.3.6.1.4.1.25506.2.42.1.5.17.1.7Integer32read-writecurrent
hh3cOnuIgmpSnoopingRouterAgingT
OBJECT-TYPE
Set the router aging time of IGMP on ONU.
1.3.6.1.4.1.25506.2.42.1.5.17.1.8Integer32read-writecurrent
hh3cOnuIgmpSnoopingAggReportS
OBJECT-TYPE
true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.
1.3.6.1.4.1.25506.2.42.1.5.17.1.9TruthValueread-writecurrent
hh3cOnuIgmpSnoopingAggLeaveS
OBJECT-TYPE
true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.
1.3.6.1.4.1.25506.2.42.1.5.17.1.10TruthValueread-writecurrent
hh3cOnuDot1xTable
OBJECT-TYPE
This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable.
1.3.6.1.4.1.25506.2.42.1.5.18not-accessiblecurrent
hh3cOnuDot1xEntry
OBJECT-TYPE
The entry of the hh3cOnuDot1xTable.
1.3.6.1.4.1.25506.2.42.1.5.18.1not-accessiblecurrent
hh3cOnuDot1xAccount
OBJECT-TYPE
ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hh3cOnuDot1xPassword.
1.3.6.1.4.1.25506.2.42.1.5.18.1.1OCTET STRINGread-writecurrent
hh3cOnuDot1xPassword
OBJECT-TYPE
ONU 802.1X password. The object should be set together with hh3cOnuDot1xAccount.
1.3.6.1.4.1.25506.2.42.1.5.18.1.2OCTET STRINGread-writecurrent
hh3cOnuPriorityQueueTable
OBJECT-TYPE
This table contains specific information of priority queue.
1.3.6.1.4.1.25506.2.42.1.5.19not-accessiblecurrent
hh3cOnuPriorityQueueEntry
OBJECT-TYPE
The entry of hh3cOnuPriorityQueueTable.
1.3.6.1.4.1.25506.2.42.1.5.19.1not-accessiblecurrent
hh3cOnuQueueDirection
OBJECT-TYPE
The direction of priority queue.
1.3.6.1.4.1.25506.2.42.1.5.19.1.1INTEGER {inbound(1), outbound(2)}not-accessiblecurrent
hh3cOnuQueueId
OBJECT-TYPE
The queue ID of priority queue.
1.3.6.1.4.1.25506.2.42.1.5.19.1.2Integer32 (0..7)not-accessiblecurrent
hh3cOnuQueueSize
OBJECT-TYPE
The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of hh3cOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100.
1.3.6.1.4.1.25506.2.42.1.5.19.1.3Integer32read-writecurrent
hh3cOnuCountTable
OBJECT-TYPE
This table contains statistics of ONU port.
1.3.6.1.4.1.25506.2.42.1.5.20not-accessiblecurrent
hh3cOnuCountEntry
OBJECT-TYPE
The entry of hh3cOnuCountTable.
1.3.6.1.4.1.25506.2.42.1.5.20.1not-accessiblecurrent
hh3cOnuInCRCErrPkts
OBJECT-TYPE
The total number of frames received with bad CRC checksum.
1.3.6.1.4.1.25506.2.42.1.5.20.1.1Counter64read-onlycurrent
hh3cOnuOutDroppedFrames
OBJECT-TYPE
The total number of frames dropped because of buffer failure.
1.3.6.1.4.1.25506.2.42.1.5.20.1.2Counter64read-onlycurrent
hh3cEponOnuScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.5.21
hh3cOnuPriorityQueueSizeMinVal
OBJECT-TYPE
The lower limit of queue size which is confined to hh3cOnuQueueSize.
1.3.6.1.4.1.25506.2.42.1.5.21.1Integer32read-onlycurrent
hh3cOnuPriorityQueueSizeMaxVal
OBJECT-TYPE
The upper limit of queue size which is confined to hh3cOnuQueueSize.
1.3.6.1.4.1.25506.2.42.1.5.21.2Integer32read-onlycurrent
hh3cOnuPriorityQueueBandwidthMinVal
OBJECT-TYPE
The lower limit of hh3cOnuQueueMaxBandwidth.
1.3.6.1.4.1.25506.2.42.1.5.21.3Integer32read-onlycurrent
hh3cOnuPriorityQueueBandwidthMaxVal
OBJECT-TYPE
The upper limit of hh3cOnuQueueMaxBandwidth.
1.3.6.1.4.1.25506.2.42.1.5.21.4Integer32read-onlycurrent
hh3cOnuPriorityQueueBurstsizeMinVal
OBJECT-TYPE
The lower limit of hh3cOnuQueueMaxBurstsize.
1.3.6.1.4.1.25506.2.42.1.5.21.5Integer32read-onlycurrent
hh3cOnuPriorityQueueBurstsizeMaxVal
OBJECT-TYPE
The upper limit of hh3cOnuQueueMaxBurstsize.
1.3.6.1.4.1.25506.2.42.1.5.21.6Integer32read-onlycurrent
hh3cOnuUpdateByTypeNextIndex
OBJECT-TYPE
Offer a free index of hh3cOnuFirmwareUpdateByTypeTable.
1.3.6.1.4.1.25506.2.42.1.5.21.7Integer32read-onlycurrent
hh3cOnuQueueBandwidthTable
OBJECT-TYPE
This table contains specific bandwidth information of ONU priority queue.
1.3.6.1.4.1.25506.2.42.1.5.22not-accessiblecurrent
hh3cOnuQueueBandwidthEntry
OBJECT-TYPE
The entry of hh3cOnuQueueBandwidthTable.
1.3.6.1.4.1.25506.2.42.1.5.22.1not-accessiblecurrent
hh3cOnuQueueMaxBandwidth
OBJECT-TYPE
The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.
1.3.6.1.4.1.25506.2.42.1.5.22.1.1Integer32read-writecurrent
hh3cOnuQueueMaxBurstsize
OBJECT-TYPE
The maximum burst size of specific ONU priority queue, measured in 64Bytes.
1.3.6.1.4.1.25506.2.42.1.5.22.1.2Integer32read-writecurrent
hh3cOnuQueuePolicyStatus
OBJECT-TYPE
true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.
1.3.6.1.4.1.25506.2.42.1.5.22.1.3TruthValueread-writecurrent
hh3cOnuIpAddressTable
OBJECT-TYPE
ONU IP address table.
1.3.6.1.4.1.25506.2.42.1.5.23not-accessiblecurrent
hh3cOnuIpAddressEntry
OBJECT-TYPE
The entry of hh3cOnuIpAddressTable.
1.3.6.1.4.1.25506.2.42.1.5.23.1not-accessiblecurrent
hh3cOnuIpAddress
OBJECT-TYPE
The IP address assigned to the ONU.
1.3.6.1.4.1.25506.2.42.1.5.23.1.1IpAddressread-writecurrent
hh3cOnuIpAddressMask
OBJECT-TYPE
The mask of IP address denoted by hh3cOnuIpAddress.
1.3.6.1.4.1.25506.2.42.1.5.23.1.2IpAddressread-writecurrent
hh3cOnuIpAddressGateway
OBJECT-TYPE
The gateway of IP address denoted by hh3cOnuIpAddress.
1.3.6.1.4.1.25506.2.42.1.5.23.1.3IpAddressread-writecurrent
hh3cOnuDhcpallocate
OBJECT-TYPE
true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.
1.3.6.1.4.1.25506.2.42.1.5.23.1.4TruthValueread-writecurrent
hh3cOnuManageVID
OBJECT-TYPE
The management VLAN of ONU denoted by hh3cOnuManageVID.
1.3.6.1.4.1.25506.2.42.1.5.23.1.5Integer32read-writecurrent
hh3cOnuManageVlanIntfS
OBJECT-TYPE
The management interface status of ONU denoted by hh3cOnuManageVlanIntfS.
1.3.6.1.4.1.25506.2.42.1.5.23.1.6TruthValueread-writecurrent
hh3cOnuChipSetInfoTable
OBJECT-TYPE
ONU vendor specific information of ONU.
1.3.6.1.4.1.25506.2.42.1.5.24not-accessiblecurrent
hh3cOnuChipSetInfoEntry
OBJECT-TYPE
The entry of hh3cOnuChipSetInfoTable.
1.3.6.1.4.1.25506.2.42.1.5.24.1not-accessiblecurrent
hh3cOnuChipSetVendorId
OBJECT-TYPE
Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.
1.3.6.1.4.1.25506.2.42.1.5.24.1.1OCTET STRING (SIZE(0..255))read-onlycurrent
hh3cOnuChipSetModel
OBJECT-TYPE
Chip model, numbering(range from 0 to 0xFF) by the chip vendor.
1.3.6.1.4.1.25506.2.42.1.5.24.1.2OCTET STRING (SIZE(0..255))read-onlycurrent
hh3cOnuChipSetRevision
OBJECT-TYPE
Chip revision.
1.3.6.1.4.1.25506.2.42.1.5.24.1.3Integer32read-onlycurrent
hh3cOnuChipSetDesignDate
OBJECT-TYPE
Chip design date.
1.3.6.1.4.1.25506.2.42.1.5.24.1.4DateAndTimeread-onlycurrent
hh3cOnuCapabilityTable
OBJECT-TYPE
Capability of ONU.
1.3.6.1.4.1.25506.2.42.1.5.25not-accessiblecurrent
hh3cOnuCapabilityEntry
OBJECT-TYPE
The entry of the table hh3cOnuCapabilityTable.
1.3.6.1.4.1.25506.2.42.1.5.25.1not-accessiblecurrent
hh3cOnuServiceSupported
OBJECT-TYPE
Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service.
1.3.6.1.4.1.25506.2.42.1.5.25.1.1Bits {geinterfacesupport(0), feinterfacesupport(1), voipservicesupport(2), tdmservicesupport(3)}read-onlycurrent
hh3cOnuGEPortNumber
OBJECT-TYPE
The current gigabit ethernet ports number supported by the ONU.
1.3.6.1.4.1.25506.2.42.1.5.25.1.2Integer32read-onlycurrent
hh3cOnuFEPortNumber
OBJECT-TYPE
the current fast ethernet ports number supported by the ONU.
1.3.6.1.4.1.25506.2.42.1.5.25.1.3Integer32read-onlycurrent
hh3cOnuPOTSPortNumber
OBJECT-TYPE
The current POTS ports number supported by the ONU
1.3.6.1.4.1.25506.2.42.1.5.25.1.4Integer32read-onlycurrent
hh3cOnuE1PortsNumber
OBJECT-TYPE
The current E1 ports number supported by the ONU.
1.3.6.1.4.1.25506.2.42.1.5.25.1.5Integer32read-onlycurrent
hh3cOnuUpstreamQueueNumber
OBJECT-TYPE
The number of upstream queues supported by the ONU.
1.3.6.1.4.1.25506.2.42.1.5.25.1.6Integer32read-onlycurrent
hh3cOnuMaxUpstreamQueuePerPort
OBJECT-TYPE
The number of maximum upstream queues per port of the ONU.
1.3.6.1.4.1.25506.2.42.1.5.25.1.7Integer32read-onlycurrent
hh3cOnuDownstreamQueueNumber
OBJECT-TYPE
The number of downstream queues supported by the ONU.
1.3.6.1.4.1.25506.2.42.1.5.25.1.8Integer32read-onlycurrent
hh3cOnuMaxDownstreamQueuePerPort
OBJECT-TYPE
The number of maximum downstream queues per port of the ONU.
1.3.6.1.4.1.25506.2.42.1.5.25.1.9Integer32read-onlycurrent
hh3cOnuBatteryBackup
OBJECT-TYPE
true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.
1.3.6.1.4.1.25506.2.42.1.5.25.1.10TruthValueread-onlycurrent
hh3cOnuIgspFastLeaveSupported
OBJECT-TYPE
true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.
1.3.6.1.4.1.25506.2.42.1.5.25.1.11TruthValueread-onlycurrent
hh3cOnuMCtrlFastLeaveSupported
OBJECT-TYPE
true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.
1.3.6.1.4.1.25506.2.42.1.5.25.1.12TruthValueread-onlycurrent
hh3cOnuType
OBJECT-TYPE
ONU type: SFU(0) HGU(1) SBU(2) MDU(3) which is cassette equipment and uses Ethernet access as broadband MDU(4) which is small card equipment and uses Ethernet access as broadband MDU(5) which is small card equipment and uses DSL access as broadband MDU(6) which is middle card equipment and uses DSL access as broadband MDU(7) which is card equipment and can use both Ethernet and DSL access as broadband MTU(8)
1.3.6.1.4.1.25506.2.42.1.5.25.1.13Integer32read-onlycurrent
hh3cOnuMultiLLID
OBJECT-TYPE
(0) - Invalid value. (1) - ONU supports one LLID. other - ONU supports multiple LLIDs.
1.3.6.1.4.1.25506.2.42.1.5.25.1.14Integer32read-onlycurrent
hh3cOnuProtectionType
OBJECT-TYPE
(0) - Not supported. (1) - ONU supports type C optical link protection. (2) - ONU supports type D optical link protection.
1.3.6.1.4.1.25506.2.42.1.5.25.1.15Integer32read-onlycurrent
hh3cOnuPonIFNum
OBJECT-TYPE
(1) - ONU support one PON interface. (2) - ONU support two PON interfaces.
1.3.6.1.4.1.25506.2.42.1.5.25.1.16Integer32read-onlycurrent
hh3cOnuSlotNum
OBJECT-TYPE
The slot number of a card ONU. If the ONU is not card equipment, 0 is returned.
1.3.6.1.4.1.25506.2.42.1.5.25.1.17Integer32read-onlycurrent
hh3cOnuIPv6Supported
OBJECT-TYPE
(0) - ONU supports IPv6. (1) - ONU does not support IPv6.
1.3.6.1.4.1.25506.2.42.1.5.25.1.18Integer32read-onlycurrent
hh3cOnuPowerSupplyControl
OBJECT-TYPE
(0) - ONU does not support ONU power supply control. (1) - ONU supports Tx power supply control only. The Tx and Rx power supply can only be controlled together whereby Rx power supply is also shutdown when Tx power supply is shutdown. (2) - ONU supports both Tx and Rx power supply control. In this case, Tx and Rx power supply can be controlled separately whereby Rx power supply is still on while Tx power supply is shutdown.
1.3.6.1.4.1.25506.2.42.1.5.25.1.19Integer32read-onlycurrent
hh3cOnuServiceSLA
OBJECT-TYPE
(1) - ONU does not support SLA services. (2~8) - ONU supports 2~8 SLA services.
1.3.6.1.4.1.25506.2.42.1.5.25.1.20Integer32read-onlycurrent
hh3cOnuDbaReportTable
OBJECT-TYPE
This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames.
1.3.6.1.4.1.25506.2.42.1.5.26not-accessiblecurrent
hh3cOnuDbaReportEntry
OBJECT-TYPE
The entry of the table hh3cOnuDbaReportTable.
1.3.6.1.4.1.25506.2.42.1.5.26.1not-accessiblecurrent
hh3cOnuDbaReportQueueId
OBJECT-TYPE
The DBA report queue ID.
1.3.6.1.4.1.25506.2.42.1.5.26.1.1Integer32not-accessiblecurrent
hh3cOnuDbaReportThreshold
OBJECT-TYPE
The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0
1.3.6.1.4.1.25506.2.42.1.5.26.1.2Integer32read-writecurrent
hh3cOnuDbaReportStatus
OBJECT-TYPE
enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.
1.3.6.1.4.1.25506.2.42.1.5.26.1.3INTEGER {enable(1), disable(2)}read-writecurrent
hh3cOnuCosToLocalPrecedenceTable
OBJECT-TYPE
Table of map of the COS to local-precedence.
1.3.6.1.4.1.25506.2.42.1.5.27not-accessiblecurrent
hh3cOnuCosToLocalPrecedenceEntry
OBJECT-TYPE
Configuration information of map of the COS to local precedence.
1.3.6.1.4.1.25506.2.42.1.5.27.1not-accessiblecurrent
hh3cOnuCosToLocalPrecedenceCosIndex
OBJECT-TYPE
Index of the map, obtains from packet cos value.
1.3.6.1.4.1.25506.2.42.1.5.27.1.1Integer32 (0..7)read-onlycurrent
hh3cOnuCosToLocalPrecedenceValue
OBJECT-TYPE
Value of local precedence.
1.3.6.1.4.1.25506.2.42.1.5.27.1.2Integer32 (0..3)read-writecurrent
hh3cEponOnuStpPortTable
OBJECT-TYPE
Table of ONU STP ports.
1.3.6.1.4.1.25506.2.42.1.5.28not-accessiblecurrent
hh3cEponOnuStpPortEntry
OBJECT-TYPE
Configuration information of ONU STP ports.
1.3.6.1.4.1.25506.2.42.1.5.28.1not-accessiblecurrent
hh3cEponStpPortIndex
OBJECT-TYPE
The index of the STP ports.
1.3.6.1.4.1.25506.2.42.1.5.28.1.1Integer32 (0..144)accessible-for-notifycurrent
hh3cEponStpPortDescr
OBJECT-TYPE
The description of the STP ports.
1.3.6.1.4.1.25506.2.42.1.5.28.1.2OCTET STRINGread-onlycurrent
hh3cEponStpPortState
OBJECT-TYPE
The current state of the port (i.e. disabled, discarding, learning and forwarding).
1.3.6.1.4.1.25506.2.42.1.5.28.1.3INTEGER {disabled(1), discarding(2), learning(3), forwarding(4)}read-onlycurrent
hh3cOnuPhysicalTable
OBJECT-TYPE
This table is used for getting ONU physical information.
1.3.6.1.4.1.25506.2.42.1.5.29not-accessiblecurrent
hh3cOnuPhysicalEntry
OBJECT-TYPE
The entry of the hh3cOnuPhysicalTable.
1.3.6.1.4.1.25506.2.42.1.5.29.1not-accessiblecurrent
hh3cOnuBridgeMac
OBJECT-TYPE
The bridge MAC address of ONU.
1.3.6.1.4.1.25506.2.42.1.5.29.1.1MacAddressread-onlycurrent
hh3cOnuFirstPonMac
OBJECT-TYPE
The MAC address of ONU first PON port.
1.3.6.1.4.1.25506.2.42.1.5.29.1.2MacAddressread-onlycurrent
hh3cOnuFirstPonRegState
OBJECT-TYPE
The register state of ONU first PON port.
1.3.6.1.4.1.25506.2.42.1.5.29.1.3INTEGER {notExist(1), absent(2), offline(3), silent(4), down(5), up(6)}read-onlycurrent
hh3cOnuSecondPonMac
OBJECT-TYPE
The MAC address of ONU second PON port.
1.3.6.1.4.1.25506.2.42.1.5.29.1.4MacAddressread-onlycurrent
hh3cOnuSecondPonRegState
OBJECT-TYPE
The register state of ONU second PON port.
1.3.6.1.4.1.25506.2.42.1.5.29.1.5INTEGER {notExist(1), absent(2), offline(3), silent(4), down(5), up(6)}read-onlycurrent
hh3cOnuSmlkTable
OBJECT-TYPE
This table is used for getting ONU SMLK information.
1.3.6.1.4.1.25506.2.42.1.5.30not-accessiblecurrent
hh3cOnuSmlkEntry
OBJECT-TYPE
The entry of the hh3cOnuSmlkTable.
1.3.6.1.4.1.25506.2.42.1.5.30.1not-accessiblecurrent
hh3cOnuSmlkGroupID
OBJECT-TYPE
The SMLK group ID of ONU.
1.3.6.1.4.1.25506.2.42.1.5.30.1.1Integer32read-onlycurrent
hh3cOnuSmlkFirstPonRole
OBJECT-TYPE
The role of ONU first PON port in a SMLK group.
1.3.6.1.4.1.25506.2.42.1.5.30.1.2INTEGER {master(1), slave(2), null(3)}read-onlycurrent
hh3cOnuSmlkFirstPonStatus
OBJECT-TYPE
The transmitting status of ONU first PON port in a SMLK group.
1.3.6.1.4.1.25506.2.42.1.5.30.1.3INTEGER {active(1), standby(2), down(3), null(4)}read-onlycurrent
hh3cOnuSmlkSecondPonRole
OBJECT-TYPE
The role of ONU second PON port in a SMLK group.
1.3.6.1.4.1.25506.2.42.1.5.30.1.4INTEGER {master(1), slave(2), null(3)}read-onlycurrent
hh3cOnuSmlkSecondPonStatus
OBJECT-TYPE
The transmitting status of ONU second PON port in a SMLK group.
1.3.6.1.4.1.25506.2.42.1.5.30.1.5INTEGER {active(1), standby(2), down(3), null(4)}read-onlycurrent
hh3cOnuRS485PropertiesTable
OBJECT-TYPE
Property table.
1.3.6.1.4.1.25506.2.42.1.5.31not-accessiblecurrent
hh3cOnuRS485PropertiesEntry
OBJECT-TYPE
The entry of property table.
1.3.6.1.4.1.25506.2.42.1.5.31.1not-accessiblecurrent
hh3cOnuRS485SerialIndex
OBJECT-TYPE
The index of serial port.
1.3.6.1.4.1.25506.2.42.1.5.31.1.1Integer32 (1..64)not-accessiblecurrent
hh3cOnuRS485BaudRate
OBJECT-TYPE
The port baud rate.
1.3.6.1.4.1.25506.2.42.1.5.31.1.2INTEGER {baudRate300(1), baudRate600(2), baudRate1200(3), baudRate2400(4), baudRate4800(5), baudRate9600(6), baudRate19200(7), baudRate38400(8), baudRate57600(9), baudRate115200(10)}read-writecurrent
hh3cOnuRS485DataBits
OBJECT-TYPE
The port number of data bits in a character.
1.3.6.1.4.1.25506.2.42.1.5.31.1.3INTEGER {five(1), six(2), seven(3), eight(4)}read-writecurrent
hh3cOnuRS485Parity
OBJECT-TYPE
The port sense of a character parity bit.
1.3.6.1.4.1.25506.2.42.1.5.31.1.4INTEGER {none(1), odd(2), even(3), mark(4), space(5)}read-writecurrent
hh3cOnuRS485StopBits
OBJECT-TYPE
The port number of stop bits.
1.3.6.1.4.1.25506.2.42.1.5.31.1.5INTEGER {one(1), two(2), oneAndHalf(3)}read-writecurrent
hh3cOnuRS485FlowControl
OBJECT-TYPE
The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.
1.3.6.1.4.1.25506.2.42.1.5.31.1.6INTEGER {none(1), hardware(2), xonOrxoff(3)}read-writecurrent
hh3cOnuRS485TXOctets
OBJECT-TYPE
The number of output octets about the port. The unit is byte.
1.3.6.1.4.1.25506.2.42.1.5.31.1.7Integer32read-onlycurrent
hh3cOnuRS485RXOctets
OBJECT-TYPE
The number of input octets about the port. The unit is byte.
1.3.6.1.4.1.25506.2.42.1.5.31.1.8Integer32read-onlycurrent
hh3cOnuRS485TXErrOctets
OBJECT-TYPE
The number of output error octets about the port. The unit is byte.
1.3.6.1.4.1.25506.2.42.1.5.31.1.9Integer32read-onlycurrent
hh3cOnuRS485RXErrOctets
OBJECT-TYPE
The number of input error octets about the port. The unit is byte.
1.3.6.1.4.1.25506.2.42.1.5.31.1.10Integer32read-onlycurrent
hh3cOnuRS485ResetStatistics
OBJECT-TYPE
Reset the counters to zero, including hh3cOnuRS485TXOctets, hh3cOnuRS485RXOctets, hh3cOnuRS485TXErrOctets and hh3cOnuRS485RXErrOctets.
1.3.6.1.4.1.25506.2.42.1.5.31.1.11INTEGER {counting(1), clear(2)}read-writecurrent
hh3cOnuRS485SessionSummaryTable
OBJECT-TYPE
Session summary table.
1.3.6.1.4.1.25506.2.42.1.5.32not-accessiblecurrent
hh3cOnuRS485SessionSummaryEntry
OBJECT-TYPE
The entry of session summary table.
1.3.6.1.4.1.25506.2.42.1.5.32.1not-accessiblecurrent
hh3cOnuRS485SessionMaxNum
OBJECT-TYPE
The max session number of every serial port which can be supported.
1.3.6.1.4.1.25506.2.42.1.5.32.1.1Integer32 (1..64)read-onlycurrent
hh3cOnuRS485SessionNextIndex
OBJECT-TYPE
The next valid index used for creating a new session raw. When there is no valid index left, it will return 0.
1.3.6.1.4.1.25506.2.42.1.5.32.1.2Integer32 (0..64)read-onlycurrent
hh3cOnuRS485SessionTable
OBJECT-TYPE
RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets.
1.3.6.1.4.1.25506.2.42.1.5.33not-accessiblecurrent
hh3cOnuRS485SessionEntry
OBJECT-TYPE
The entry of session table.
1.3.6.1.4.1.25506.2.42.1.5.33.1not-accessiblecurrent
hh3cOnuRS485SessionIndex
OBJECT-TYPE
Raw session index.
1.3.6.1.4.1.25506.2.42.1.5.33.1.1Integer32 (1..64)not-accessiblecurrent
hh3cOnuRS485SessionType
OBJECT-TYPE
The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
1.3.6.1.4.1.25506.2.42.1.5.33.1.2INTEGER {udp(1), tcpClient(2), tcpServer(3)}read-createcurrent
hh3cOnuRS485SessionAddType
OBJECT-TYPE
This object indicates the transport type of the address contained in hh3cOnuRS485SessionRemoteIP object.
1.3.6.1.4.1.25506.2.42.1.5.33.1.3InetAddressTyperead-createcurrent
hh3cOnuRS485SessionRemoteIP
OBJECT-TYPE
The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.
1.3.6.1.4.1.25506.2.42.1.5.33.1.4InetAddressread-createcurrent
hh3cOnuRS485SessionRemotePort
OBJECT-TYPE
The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.
1.3.6.1.4.1.25506.2.42.1.5.33.1.5Integer32 (1024..65535)read-createcurrent
hh3cOnuRS485SessionLocalPort
OBJECT-TYPE
Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.
1.3.6.1.4.1.25506.2.42.1.5.33.1.6Integer32 (1024..65535)read-createcurrent
hh3cOnuRS485SessionRowStatus
OBJECT-TYPE
The status used for creating, modifying, and deleting instances of the columnar objects in raw session table.
1.3.6.1.4.1.25506.2.42.1.5.33.1.7RowStatusread-createcurrent
hh3cOnuRS485SessionErrInfoTable
OBJECT-TYPE
Error information table. When failed to create a session, error information can be got from this table.
1.3.6.1.4.1.25506.2.42.1.5.34not-accessiblecurrent
hh3cOnuRS485SessionErrInfoEntry
OBJECT-TYPE
The entry of error information table.
1.3.6.1.4.1.25506.2.42.1.5.34.1not-accessiblecurrent
hh3cOnuRS485SessionErrInfo
OBJECT-TYPE
Error information string. When a response with 'noCreeation' for row creation in table hh3cOnuRS485SessionTable, the error reason can be got from this object.
1.3.6.1.4.1.25506.2.42.1.5.34.1.1DisplayStringread-onlycurrent
hh3cOnuDbaReport2Table
OBJECT-TYPE
This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames.
1.3.6.1.4.1.25506.2.42.1.5.35not-accessiblecurrent
hh3cOnuDbaReport2Entry
OBJECT-TYPE
The entry of the table hh3cOnuDbaReport2Table.
1.3.6.1.4.1.25506.2.42.1.5.35.1not-accessiblecurrent
hh3cOnuDbaReport2QueueSetId
OBJECT-TYPE
The DBA report queue set ID.
1.3.6.1.4.1.25506.2.42.1.5.35.1.1Integer32 (1..3)not-accessiblecurrent
hh3cOnuDbaReport2QueueId
OBJECT-TYPE
The DBA report queue ID.
1.3.6.1.4.1.25506.2.42.1.5.35.1.2Integer32 (1..8)not-accessiblecurrent
hh3cOnuDbaReport2Threshold
OBJECT-TYPE
The thresholds of the DBA report queue. The following are the queue ID and the related default threshold settings. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0
1.3.6.1.4.1.25506.2.42.1.5.35.1.3Integer32read-writecurrent
hh3cOnuDbaReport2Status
OBJECT-TYPE
true -threshold configuration is active for the queue. false -threshold configuration is not active for the queue.
1.3.6.1.4.1.25506.2.42.1.5.35.1.4TruthValueread-writecurrent
hh3cOnuLoidInfoTable
OBJECT-TYPE
This table is used for getting LOID information of an ONU.
1.3.6.1.4.1.25506.2.42.1.5.36not-accessiblecurrent
hh3cOnuLoidInfoEntry
OBJECT-TYPE
The entry of the hh3cOnuLoidInfoTable.
1.3.6.1.4.1.25506.2.42.1.5.36.1not-accessiblecurrent
hh3cOnuLoidIndex
OBJECT-TYPE
The index of an ONU in one OLT.
1.3.6.1.4.1.25506.2.42.1.5.36.1.1Integer32not-accessiblecurrent
hh3cOnuLoidFlag
OBJECT-TYPE
The flag of ONU status. 1 - bound: The ONU is bound but not registered. 2 - registered: The ONU is registered but not bound. 3 - run: The ONU is registered and bound on one OLT. 4 - regIncorrect: The ONU is bound on one OLT and registered on another OLT.
1.3.6.1.4.1.25506.2.42.1.5.36.1.2INTEGER {bound(1), registered(2), run(3), regIncorrect(4)}read-onlycurrent
hh3cOnuLoid
OBJECT-TYPE
The LOID of an ONU.
1.3.6.1.4.1.25506.2.42.1.5.36.1.3OCTET STRING (SIZE(1..24))read-onlycurrent
hh3cOnuStatisticsTable
OBJECT-TYPE
This table is used for enabling or disabling statistics and setting period of a PON.
1.3.6.1.4.1.25506.2.42.1.5.37not-accessiblecurrent
hh3cOnuStatisticsEntry
OBJECT-TYPE
The entry of the hh3cOnuStatisticsTable.
1.3.6.1.4.1.25506.2.42.1.5.37.1not-accessiblecurrent
hh3cOnuStatisticsPeriodVal
OBJECT-TYPE
PON statistics period value.
1.3.6.1.4.1.25506.2.42.1.5.37.1.1Unsigned32read-writecurrent
hh3cOnuStatisticsEnable
OBJECT-TYPE
Enable or disable statistics of a PON. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.25506.2.42.1.5.37.1.2TruthValueread-writecurrent
hh3cOnuSlaMaxBandWidthMinVal10G
OBJECT-TYPE
The lower limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth for 10G EPON.
1.3.6.1.4.1.25506.2.42.1.5.38Integer32read-onlycurrent
hh3cOnuSlaMaxBandWidthMaxVal10G
OBJECT-TYPE
The upper limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth for 10G EPON.
1.3.6.1.4.1.25506.2.42.1.5.39Integer32read-onlycurrent
hh3cOnuSlaMinBandWidthMinVal10G
OBJECT-TYPE
The lower limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth for 10G EPON.
1.3.6.1.4.1.25506.2.42.1.5.40Integer32read-onlycurrent
hh3cOnuSlaMinBandWidthMaxVal10G
OBJECT-TYPE
The upper limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth for 10G EPON.
1.3.6.1.4.1.25506.2.42.1.5.41Integer32read-onlycurrent
hh3cOnuServiceSlaTable
OBJECT-TYPE
This table is used for setting the service SLA mode and applying the service SLA to an ONU.
1.3.6.1.4.1.25506.2.42.1.5.42not-accessiblecurrent
hh3cOnuServiceSlaEntry
OBJECT-TYPE
The entry of the hh3cOnuServiceSlaTable.
1.3.6.1.4.1.25506.2.42.1.5.42.1not-accessiblecurrent
hh3cSlaSchedulingMode
OBJECT-TYPE
Service SLA scheduling mode.
1.3.6.1.4.1.25506.2.42.1.5.42.1.1INTEGER {sp(0), wrr(1), spWrr(2), invalid(3)}read-writecurrent
hh3cSlaHighPrioBoundary
OBJECT-TYPE
Service SLA high priority boundary in SP-WRR mode.
1.3.6.1.4.1.25506.2.42.1.5.42.1.2Integer32read-writecurrent
hh3cSlaCycleLength
OBJECT-TYPE
Service SLA cycle length in time quantums.
1.3.6.1.4.1.25506.2.42.1.5.42.1.3Integer32 (200..16777215)read-writecurrent
hh3cSlaApply
OBJECT-TYPE
Apply service SLA configuration. true(1) - Apply. false(2) - Not apply.
1.3.6.1.4.1.25506.2.42.1.5.42.1.4TruthValueread-writecurrent
hh3cOnuServiceSlaQueTable
OBJECT-TYPE
This table is used for configuring service SLA queues.
1.3.6.1.4.1.25506.2.42.1.5.43not-accessiblecurrent
hh3cOnuServiceSlaQueEntry
OBJECT-TYPE
The entry of the hh3cOnuServiceSlaQueTable.
1.3.6.1.4.1.25506.2.42.1.5.43.1not-accessiblecurrent
hh3cSlaQueId
OBJECT-TYPE
Service SLA queue ID.
1.3.6.1.4.1.25506.2.42.1.5.43.1.1Integer32not-accessiblecurrent
hh3cSlaQueMode
OBJECT-TYPE
Service SLA queue mode.
1.3.6.1.4.1.25506.2.42.1.5.43.1.2INTEGER {sp(0), wrr(1)}read-createcurrent
hh3cSlaQueWeight
OBJECT-TYPE
Service SLA queue weight in WRR mode.
1.3.6.1.4.1.25506.2.42.1.5.43.1.3Integer32 (0..100)read-createcurrent
hh3cSlaQueFixPktSize
OBJECT-TYPE
Service SLA queue fixed packet size in bytes.
1.3.6.1.4.1.25506.2.42.1.5.43.1.4Integer32 (0..2000)read-createcurrent
hh3cSlaQueFixBandwidth
OBJECT-TYPE
Service SLA queue fixed bandwidth in kbps, which will be rounded down to the nearest multiple of 256.
1.3.6.1.4.1.25506.2.42.1.5.43.1.5Integer32read-createcurrent
hh3cSlaQueGuaBandwidth
OBJECT-TYPE
Service SLA queue guaranteed bandwidth in kbps, which will be rounded down to the nearest multiple of 256.
1.3.6.1.4.1.25506.2.42.1.5.43.1.6Integer32read-createcurrent
hh3cSlaQueBstBandwidth
OBJECT-TYPE
Service SLA queue best effort bandwidth in kbps, which will be rounded down to the nearest multiple of 256.
1.3.6.1.4.1.25506.2.42.1.5.43.1.7Integer32read-createcurrent
hh3cSlaQueRowStatus
OBJECT-TYPE
The status of this table entry. Only active, createAndGo, and destroy are supported.
1.3.6.1.4.1.25506.2.42.1.5.43.1.8RowStatusread-createcurrent
hh3cOnuPoeTable
OBJECT-TYPE
This table is used for configuring the PoE function for ONUs.
1.3.6.1.4.1.25506.2.42.1.5.44not-accessiblecurrent
hh3cOnuPoeEntry
OBJECT-TYPE
The entry of the hh3cOnuPoeTable.
1.3.6.1.4.1.25506.2.42.1.5.44.1not-accessiblecurrent
hh3cOnuPoeEnable
OBJECT-TYPE
Enable PoE for an ONU.
1.3.6.1.4.1.25506.2.42.1.5.44.1.1TruthValueread-writecurrent
hh3cOnuPoeMode
OBJECT-TYPE
Set the PoE mode for an ONU.
1.3.6.1.4.1.25506.2.42.1.5.44.1.2INTEGER {signal(0), spare(1)}read-writecurrent
hh3cOnuPoeMaxPowerClass
OBJECT-TYPE
Set the PoE max power class for an ONU.
1.3.6.1.4.1.25506.2.42.1.5.44.1.3INTEGER {default(0), class0(1), class1(2), class2(3), class3(4), class4(5), undefined(255)}read-writecurrent
hh3cOnuPoeMaxPowerValue
OBJECT-TYPE
Set the PoE max power value for an ONU.
1.3.6.1.4.1.25506.2.42.1.5.44.1.4Integer32read-writecurrent
hh3cOnuPoeLegacyEnable
OBJECT-TYPE
Enable the PoE legacy PD detection for an ONU.
1.3.6.1.4.1.25506.2.42.1.5.44.1.5TruthValueread-writecurrent
hh3cEponBatchOperationMan
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.6
hh3cEponBatchOperationBySlotTable
OBJECT-TYPE
This table is used for batch operation by slot.
1.3.6.1.4.1.25506.2.42.1.6.1not-accessiblecurrent
hh3cEponBatchOperationBySlotEntry
OBJECT-TYPE
The entry of the hh3cEponBatchOperationBySlotTable.
1.3.6.1.4.1.25506.2.42.1.6.1.1not-accessiblecurrent
hh3cEponBatchOperationBySlotIndex
OBJECT-TYPE
The EPON board index.
1.3.6.1.4.1.25506.2.42.1.6.1.1.1Integer32not-accessiblecurrent
hh3cEponBatchOperationBySlotType
OBJECT-TYPE
The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hh3cEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
1.3.6.1.4.1.25506.2.42.1.6.1.1.2INTEGER {resetUnknown(1), updateDba(9), updateONU(10)}read-writecurrent
hh3cEponBatchOperationBySlot
OBJECT-TYPE
Execute batch operation.
1.3.6.1.4.1.25506.2.42.1.6.1.1.3INTEGER {batOpBySlot(1)}read-writecurrent
hh3cEponBatchOperationBySlotResult
OBJECT-TYPE
The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype.
1.3.6.1.4.1.25506.2.42.1.6.1.1.4Integer32read-onlycurrent
hh3cEponBatchOpBySlotBindType
OBJECT-TYPE
Set batch binding type, which can only be assigned one type.
1.3.6.1.4.1.25506.2.42.1.6.1.1.5Bits {mac(0), loid(1), loidPassword(2)}read-writecurrent
hh3cEponBatchOperationByOLTTable
OBJECT-TYPE
This table is used for batch operation by OLT.
1.3.6.1.4.1.25506.2.42.1.6.2not-accessiblecurrent
hh3cEponBatchOperationByOLTEntry
OBJECT-TYPE
The entry of the hh3cEponBatchOperationByOLTTable.
1.3.6.1.4.1.25506.2.42.1.6.2.1not-accessiblecurrent
hh3cEponBatchOperationByOLTType
OBJECT-TYPE
The types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
1.3.6.1.4.1.25506.2.42.1.6.2.1.1INTEGER {resetUnknown(1), updateONU(5)}read-writecurrent
hh3cEponBatchOperationByOLT
OBJECT-TYPE
Execute batch operation.
1.3.6.1.4.1.25506.2.42.1.6.2.1.2INTEGER {batOpByOlt(1)}read-writecurrent
hh3cEponBatchOperationByOLTResult
OBJECT-TYPE
The result of batch operation: 0xFFFF -- other, general error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype.
1.3.6.1.4.1.25506.2.42.1.6.2.1.3Integer32read-onlycurrent
hh3cOnuFirmwareUpdateByTypeTable
OBJECT-TYPE
This table is used to update ONU by ONU type.
1.3.6.1.4.1.25506.2.42.1.6.3not-accessiblecurrent
hh3cOnuFirmwareUpdateByTypeEntry
OBJECT-TYPE
The entry of the hh3cOnuFirmwareUpdateByTypeTable.
1.3.6.1.4.1.25506.2.42.1.6.3.1not-accessiblecurrent
hh3cOnuUpdateByOnuTypeIndex
OBJECT-TYPE
The type and file relationship table entry index.
1.3.6.1.4.1.25506.2.42.1.6.3.1.1Integer32not-accessiblecurrent
hh3cOnuUpdateByTypeOnuType
OBJECT-TYPE
The type of ONUs.
1.3.6.1.4.1.25506.2.42.1.6.3.1.2OCTET STRING (SIZE(0..15))read-createcurrent
hh3cOnuUpdateByTypeFileName
OBJECT-TYPE
The file to be updated for the type of ONUs.
1.3.6.1.4.1.25506.2.42.1.6.3.1.3OCTET STRING (SIZE(0..255))read-createcurrent
hh3cOnuUpdateByTypeRowStatus
OBJECT-TYPE
The status of this table entry. Only createAndGo and destroy actions are supported.
1.3.6.1.4.1.25506.2.42.1.6.3.1.4RowStatusread-createcurrent
hh3cOnuUpdateByTypeProtType
OBJECT-TYPE
private(0): Using private protocol to update the ONU firmware. ctc(1): Using ctc standard protocol to update the ONU firmware.
1.3.6.1.4.1.25506.2.42.1.6.3.1.5INTEGER {private(0), ctc(1)}read-writecurrent
hh3cOnuUpdateByTypeStartTime
OBJECT-TYPE
The start time of the ONU update every day. Using HH:MM as format.
1.3.6.1.4.1.25506.2.42.1.6.3.1.6OCTET STRING (SIZE(0..5))read-writecurrent
hh3cOnuUpdateByTypeDuration
OBJECT-TYPE
The duration of the ONU update.
1.3.6.1.4.1.25506.2.42.1.6.3.1.7Integer32 (0..1439)read-writecurrent
hh3cEponErrorInfo
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.7
hh3cEponSoftwareErrorCode
OBJECT-TYPE
OLT software error code.
1.3.6.1.4.1.25506.2.42.1.7.1Integer32accessible-for-notifycurrent
hh3cOamVendorSpecificAlarmCode
OBJECT-TYPE
Alarm code of the vendor.
1.3.6.1.4.1.25506.2.42.1.7.2Integer32accessible-for-notifycurrent
hh3cEponOnuRegErrorMacAddr
OBJECT-TYPE
The MAC of ONU registered error.
1.3.6.1.4.1.25506.2.42.1.7.3OCTET STRINGaccessible-for-notifycurrent
hh3cOamEventLogType
OBJECT-TYPE
The type of event that generated this entry in the event log.
1.3.6.1.4.1.25506.2.42.1.7.4Unsigned32accessible-for-notifycurrent
hh3cOamEventLogLocation
OBJECT-TYPE
Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM.
1.3.6.1.4.1.25506.2.42.1.7.5INTEGER {local(1), remote(2)}accessible-for-notifycurrent
hh3cEponLoopbackPortIndex
OBJECT-TYPE
The index of port which generate loop back event.
1.3.6.1.4.1.25506.2.42.1.7.6Integer32accessible-for-notifycurrent
hh3cEponLoopbackPortDescr
OBJECT-TYPE
A textual string containing information about the port generated loop back event.
1.3.6.1.4.1.25506.2.42.1.7.7OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hh3cOltPortAlarmLlidMisFrames
OBJECT-TYPE
the amount of mismatched frames about the LLID mismatch alarm.
1.3.6.1.4.1.25506.2.42.1.7.8Unsigned32accessible-for-notifycurrent
hh3cOltPortAlarmBer
OBJECT-TYPE
error bit rate.
1.3.6.1.4.1.25506.2.42.1.7.9Unsigned32accessible-for-notifycurrent
hh3cOltPortAlarmFer
OBJECT-TYPE
error frames rate.
1.3.6.1.4.1.25506.2.42.1.7.10Unsigned32accessible-for-notifycurrent
hh3cEponOnuRegSilentMac
OBJECT-TYPE
The MAC of silent ONU.
1.3.6.1.4.1.25506.2.42.1.7.11OCTET STRINGaccessible-for-notifycurrent
hh3cEponOperationResult
OBJECT-TYPE
The result of EPON operation.
1.3.6.1.4.1.25506.2.42.1.7.12OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
hh3cEponOnuLaserState
OBJECT-TYPE
The state of ONU laser.
1.3.6.1.4.1.25506.2.42.1.7.13INTEGER {normal(1), laserAlwaysOn(2), signalDegradation(3), endOfLife(4)}accessible-for-notifycurrent
hh3cEponOnuRegSilentBindType
OBJECT-TYPE
The binding type of a silent ONU.
1.3.6.1.4.1.25506.2.42.1.7.14Bits {mac(0), loid(1), loidPassword(2)}accessible-for-notifycurrent
hh3cEponOnuRegSilentLoid
OBJECT-TYPE
The LOID of a silent ONU.
1.3.6.1.4.1.25506.2.42.1.7.15OCTET STRINGaccessible-for-notifycurrent
hh3cEponOnuRegSilentLoidPwd
OBJECT-TYPE
The LOID's password of a silent ONU. A zero-length string will be returned when reading.
1.3.6.1.4.1.25506.2.42.1.7.16OCTET STRINGaccessible-for-notifycurrent
hh3cEponOnuRegErrorLoid
OBJECT-TYPE
The LOID of an ONU with registration error.
1.3.6.1.4.1.25506.2.42.1.7.17OCTET STRINGaccessible-for-notifycurrent
hh3cEponOnuRegErrorLoidCode
OBJECT-TYPE
The reason of ONU registration failure.
1.3.6.1.4.1.25506.2.42.1.7.18INTEGER {loidNotExist(1), wrongPassword(2), conflictLoid(3), notSupport(4), mismatch(5)}accessible-for-notifycurrent
hh3cEponTrap
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.8
hh3cEponTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.8.0
hh3cEponStat
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.9
hh3cEponStatTable
OBJECT-TYPE
This table contains line code error statistics of epon port.
1.3.6.1.4.1.25506.2.42.1.9.1not-accessiblecurrent
hh3cEponStatEntry
OBJECT-TYPE
The entry of hh3cEponStatTable.
1.3.6.1.4.1.25506.2.42.1.9.1.1not-accessiblecurrent
hh3cEponStatFER
OBJECT-TYPE
The frame error rate of epon port, measured in 1e-9 unit.
1.3.6.1.4.1.25506.2.42.1.9.1.1.1Counter64read-onlycurrent
hh3cEponStatBER
OBJECT-TYPE
The bit error rate of epon port, measured in 1e-9 unit.
1.3.6.1.4.1.25506.2.42.1.9.1.1.2Counter64read-onlycurrent
hh3cEponRoltMan
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.42.1.10
hh3cRoltInterfaceTable
OBJECT-TYPE
The table of redundant OLT interfaces.
1.3.6.1.4.1.25506.2.42.1.10.1not-accessiblecurrent
hh3cRoltInterfaceEntry
OBJECT-TYPE
The entry of the table hh3cRoltInterfaceTable.
1.3.6.1.4.1.25506.2.42.1.10.1.1not-accessiblecurrent
hh3cRoltInterfaceNumber
OBJECT-TYPE
The number of an ROLT interface.
1.3.6.1.4.1.25506.2.42.1.10.1.1.1Integer32not-accessiblecurrent
hh3cRoltInterfaceIfIndex
OBJECT-TYPE
The ifIndex of an ROLT interface.
1.3.6.1.4.1.25506.2.42.1.10.1.1.2Integer32read-onlycurrent
hh3cRoltInterfaceRowStatus
OBJECT-TYPE
Create or delete a redundant OLT interface. Now only two operations are supported: createAndGo and destroy.
1.3.6.1.4.1.25506.2.42.1.10.1.1.3RowStatusread-createcurrent
hh3cRoltMemberTable
OBJECT-TYPE
This table is used for adding or deleting the OLT member interfaces of an redundant OLT interface.
1.3.6.1.4.1.25506.2.42.1.10.2not-accessiblecurrent
hh3cRoltMemberEntry
OBJECT-TYPE
The entry of the table hh3cRoltMemberTable.
1.3.6.1.4.1.25506.2.42.1.10.2.1not-accessiblecurrent
hh3cRoltMemberOltIfindex
OBJECT-TYPE
The ifindex of an OLT interface.
1.3.6.1.4.1.25506.2.42.1.10.2.1.1Integer32not-accessiblecurrent
hh3cRoltMemberOltPriority
OBJECT-TYPE
The priority of an OLT interface that will be assigned to an ROLT interface.
1.3.6.1.4.1.25506.2.42.1.10.2.1.2Integer32 (1..255)read-createcurrent
hh3cRoltMemberRowStatus
OBJECT-TYPE
Operation status. Now only two states are supported: createAndGo and destroy.
1.3.6.1.4.1.25506.2.42.1.10.2.1.3RowStatusread-createcurrent
hh3cRoltMemberForwardStatus
OBJECT-TYPE
The forwarding status of an OLT member interface. true(1) - Active. false(2) - Inactive.
1.3.6.1.4.1.25506.2.42.1.10.2.1.4TruthValueread-onlycurrent

Notifications

NameOIDStatus
hh3cEponPortAlarmBerTrap
NOTIFICATION-TYPE
A hh3cEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected.
1.3.6.1.4.1.25506.2.42.1.8.0.1current
hh3cEponPortAlarmFerTrap
NOTIFICATION-TYPE
A hh3cEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected.
1.3.6.1.4.1.25506.2.42.1.8.0.2current
hh3cEponErrorLLIDFrameTrap
NOTIFICATION-TYPE
A hh3cEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected.
1.3.6.1.4.1.25506.2.42.1.8.0.3current
hh3cEponLoopBackEnableTrap
NOTIFICATION-TYPE
A hh3cEponLoopBackEnableTrap notification is sent when the loop back command is committed.
1.3.6.1.4.1.25506.2.42.1.8.0.4current
hh3cEponOnuRegistrationErrTrap
NOTIFICATION-TYPE
A hh3cEponOnuRegistrationErrTrap notification is sent when a ONU register failed.
1.3.6.1.4.1.25506.2.42.1.8.0.5current
hh3cEponOamDisconnectionTrap
NOTIFICATION-TYPE
A hh3cEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
1.3.6.1.4.1.25506.2.42.1.8.0.6current
hh3cEponEncryptionKeyErrTrap
NOTIFICATION-TYPE
A hh3cEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad.
1.3.6.1.4.1.25506.2.42.1.8.0.7current
hh3cEponRemoteStableTrap
NOTIFICATION-TYPE
A hh3cEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information.
1.3.6.1.4.1.25506.2.42.1.8.0.8current
hh3cEponLocalStableTrap
NOTIFICATION-TYPE
A hh3cEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information.
1.3.6.1.4.1.25506.2.42.1.8.0.9current
hh3cEponOamVendorSpecificTrap
NOTIFICATION-TYPE
A hh3cEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised.
1.3.6.1.4.1.25506.2.42.1.8.0.10current
hh3cEponSoftwareErrTrap
NOTIFICATION-TYPE
A hh3cEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs.
1.3.6.1.4.1.25506.2.42.1.8.0.11current
hh3cEponPortAlarmBerRecoverTrap
NOTIFICATION-TYPE
A hh3cEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered.
1.3.6.1.4.1.25506.2.42.1.8.0.12current
hh3cEponPortAlarmFerRecoverTrap
NOTIFICATION-TYPE
A hh3cEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recovered.
1.3.6.1.4.1.25506.2.42.1.8.0.13current
hh3cEponErrorLLIDFrameRecoverTrap
NOTIFICATION-TYPE
A hh3cEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recovered.
1.3.6.1.4.1.25506.2.42.1.8.0.14current
hh3cEponLoopBackEnableRecoverTrap
NOTIFICATION-TYPE
A hh3cEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recovered.
1.3.6.1.4.1.25506.2.42.1.8.0.15current
hh3cEponOnuRegistrationErrRecoverTrap
NOTIFICATION-TYPE
A hh3cEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again.
1.3.6.1.4.1.25506.2.42.1.8.0.16current
hh3cEponOamDisconnectionRecoverTrap
NOTIFICATION-TYPE
A hh3cEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
1.3.6.1.4.1.25506.2.42.1.8.0.17current
hh3cEponEncryptionKeyErrRecoverTrap
NOTIFICATION-TYPE
A hh3cEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right.
1.3.6.1.4.1.25506.2.42.1.8.0.18current
hh3cEponRemoteStableRecoverTrap
NOTIFICATION-TYPE
A hh3cEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized.
1.3.6.1.4.1.25506.2.42.1.8.0.19current
hh3cEponLocalStableRecoverTrap
NOTIFICATION-TYPE
A hh3cEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized.
1.3.6.1.4.1.25506.2.42.1.8.0.20current
hh3cEponOamVendorSpecificRecoverTrap
NOTIFICATION-TYPE
A hh3cEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered.
1.3.6.1.4.1.25506.2.42.1.8.0.21current
hh3cEponSoftwareErrRecoverTrap
NOTIFICATION-TYPE
A hh3cEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered.
1.3.6.1.4.1.25506.2.42.1.8.0.22current
hh3cDot3OamThresholdRecoverEvent
NOTIFICATION-TYPE
A hh3cDot3OamThresholdRecoverEvent notification is sent when hh3cDot3OamThresholdEvent is detected and then recovered.
1.3.6.1.4.1.25506.2.42.1.8.0.23current
hh3cDot3OamNonThresholdRecoverEvent
NOTIFICATION-TYPE
A hh3cDot3OamNonThresholdRecoverEvent notification is sent when hh3cDot3OamNonThresholdEvent is detected and then recovered.
1.3.6.1.4.1.25506.2.42.1.8.0.24current
hh3cEponOnuRegExcessTrap
NOTIFICATION-TYPE
A hh3cEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit.
1.3.6.1.4.1.25506.2.42.1.8.0.25current
hh3cEponOnuRegExcessRecoverTrap
NOTIFICATION-TYPE
A hh3cEponOnuRegExcessRecoverTrap notification is sent when hh3cEponOnuRegExcessTrap is detected and then recovered.
1.3.6.1.4.1.25506.2.42.1.8.0.26current
hh3cEponOnuPowerOffTrap
NOTIFICATION-TYPE
A hh3cEponOnuPowerOffTrap notification is sent when ONU is power off.
1.3.6.1.4.1.25506.2.42.1.8.0.27current
hh3cEponOltSwitchoverTrap
NOTIFICATION-TYPE
A hh3cEponOltSwithoverTrap notification is sent when OLT switchover is detected.
1.3.6.1.4.1.25506.2.42.1.8.0.28current
hh3cEponOltDFETrap
NOTIFICATION-TYPE
A hh3cEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT.
1.3.6.1.4.1.25506.2.42.1.8.0.29current
hh3cEponOltDFERecoverTrap
NOTIFICATION-TYPE
A hh3cEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recovered.
1.3.6.1.4.1.25506.2.42.1.8.0.30current
hh3cEponOnuSilenceTrap
NOTIFICATION-TYPE
The hh3cEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT.
1.3.6.1.4.1.25506.2.42.1.8.0.31current
hh3cEponOnuSilenceRecoverTrap
NOTIFICATION-TYPE
The hh3cEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout.
1.3.6.1.4.1.25506.2.42.1.8.0.32current
hh3cEponOnuUpdateResultTrap
NOTIFICATION-TYPE
A hh3cEponUpdateResultTrap notification is sent when an ONU reported its firmware update result.
1.3.6.1.4.1.25506.2.42.1.8.0.33current
hh3cEponOnuAutoBindTrap
NOTIFICATION-TYPE
A hh3cEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically.
1.3.6.1.4.1.25506.2.42.1.8.0.34current
hh3cEponOnuPortStpStateTrap
NOTIFICATION-TYPE
A hh3cEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment.
1.3.6.1.4.1.25506.2.42.1.8.0.35current
hh3cEponOnuLaserFailedTrap
NOTIFICATION-TYPE
A hh3cEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life).
1.3.6.1.4.1.25506.2.42.1.8.0.36current
hh3cOnuSmlkSwitchoverTrap
NOTIFICATION-TYPE
A hh3cOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected.
1.3.6.1.4.1.25506.2.42.1.8.0.37current
hh3cEponOnuRegLoidErrTrap
NOTIFICATION-TYPE
A hh3cEponOnuRegLoidErrTrap notification is sent when an ONU failed to register identified by LOID.
1.3.6.1.4.1.25506.2.42.1.8.0.38current
hh3cEponOnuRegLoidErrRecTrap
NOTIFICATION-TYPE
A hh3cEponOnuRegLoidErrRecTrap notification is sent when an ONU failed to register and then registered successful again identified by LOID.
1.3.6.1.4.1.25506.2.42.1.8.0.39current
hh3cEponOnuSilenceLoidTrap
NOTIFICATION-TYPE
The hh3cEponOnuSilenceLoidTrap notification is sent when an unbound ONU try to register to an OLT identified by LOID.
1.3.6.1.4.1.25506.2.42.1.8.0.40current
hh3cEponOnuSilenceLoidRecTrap
NOTIFICATION-TYPE
The hh3cEponOnuSilenceLoidRecTrap notification is sent when a silent ONU is bound in the OLT or the aging ONU MAC address times out identified by LOID.
1.3.6.1.4.1.25506.2.42.1.8.0.41current
hh3cEponOnuUpdateLoidRetTrap
NOTIFICATION-TYPE
A hh3cEponOnuUpdateLoidRetTrap notification is sent when an ONU reported its firmware update result identified by LOID.
1.3.6.1.4.1.25506.2.42.1.8.0.42current
hh3cEponOnuAutoBindLoidTrap
NOTIFICATION-TYPE
A hh3cEponOnuAutoBindLoidTrap notification is sent when a silent ONU is bound automatically identified by LOID.
1.3.6.1.4.1.25506.2.42.1.8.0.43current
hh3cEponOnuPowerOnTrap
NOTIFICATION-TYPE
A hh3cEponOnuPowerOffTrap notification is sent when ONU is powered on.
1.3.6.1.4.1.25506.2.42.1.8.0.44current
hh3cEponOpticalSignalLosTrap
NOTIFICATION-TYPE
A hh3cEponOpticalSignalLosTrap notification is sent when optical signals are lost.
1.3.6.1.4.1.25506.2.42.1.8.0.45current
hh3cEponOpticalSignalLosRecoverTrap
NOTIFICATION-TYPE
A hh3cEponOpticalSignalLosTrap notification is sent when optical signal loss recovers.
1.3.6.1.4.1.25506.2.42.1.8.0.46current
hh3cEponOnuFiberFailTrap
NOTIFICATION-TYPE
A hh3cEponOnuPowerOffTrap notification is sent when the ONU fiber fails.
1.3.6.1.4.1.25506.2.42.1.8.0.47current
hh3cEponOnuFiberFailRecoverTrap
NOTIFICATION-TYPE
A hh3cEponOnuPowerOffTrap notification is sent when the ONU fiber failure recovers.
1.3.6.1.4.1.25506.2.42.1.8.0.48current