HH3C-DOT11-WLANEXT-MIB
- Registered at
- 1.3.6.1.4.1.25506.2.75.7
- Last updated
- 2007-06-08 20:00
- Organization
- New H3C Technologies Co., Ltd.
- Revisions
- 2007-06-08 20:00
- Namespace
- comware
- Source file
HH3C-DOT11-WLANEXT-MIB- Digest
sha256:7f5b1269e45678a3d1e24d6d96855cddd560d6ae71f2970648900854d3624d99
Description
This MIB provides more information for WLAN network. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11e Standard to define the MAC procedures to support LAN applications with Quality of Service (QoS) requirements, including the transport of voice, audio and video over IEEE 802.11 wireless LANs. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
Contact
Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085
Imports
| From | Symbols |
|---|---|
| HH3C-DOT11-REF-MIB | Hh3cDot11ObjectIDType, Hh3cDot11QosAcType, Hh3cDot11RadioScopeType, hh3cDot11 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HH3C-DOT11-REF-MIB HH3C-DOT11-WLANEXT-MIB HH3C-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| hh3cDot11RFGroup OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.75.7.1 | |||
| hh3cDot11RFSignalStatisTable OBJECT-TYPE The table will describe statistic information of signal strength for AP radio. | 1.3.6.1.4.1.25506.2.75.7.1.1 | not-accessible | current | |
| hh3cDot11RFSignalStatisEntry OBJECT-TYPE Each entry contains the signal of each signal strength information of a specific AP. | 1.3.6.1.4.1.25506.2.75.7.1.1.1 | not-accessible | current | |
| hh3cDot11RFAPID OBJECT-TYPE To identify each AP, and AP is running status. | 1.3.6.1.4.1.25506.2.75.7.1.1.1.1 | Hh3cDot11ObjectIDType | not-accessible | current |
| hh3cDot11RFRadioID OBJECT-TYPE Represents each radio. | 1.3.6.1.4.1.25506.2.75.7.1.1.1.2 | Hh3cDot11RadioScopeType | not-accessible | current |
| hh3cDot11RFSignalStatisInterv OBJECT-TYPE Represents the interval of statistic. | 1.3.6.1.4.1.25506.2.75.7.1.1.1.3 | Integer32 | read-only | current |
| hh3cDot11RFAverageSignalStrength OBJECT-TYPE Represents the average value of signal strength for stations on a specific radio. | 1.3.6.1.4.1.25506.2.75.7.1.1.1.4 | Integer32 | read-only | current |
| hh3cDot11RFMaxSignalStrength OBJECT-TYPE Represents the maximum value of signal strength for stations on a specific radio. | 1.3.6.1.4.1.25506.2.75.7.1.1.1.5 | Integer32 | read-only | current |
| hh3cDot11RFMinSignalStrength OBJECT-TYPE Represents the minimum value of signal strength for stations on a specific radio. | 1.3.6.1.4.1.25506.2.75.7.1.1.1.6 | Integer32 | read-only | current |
| hh3cDot11QosGroup OBJECT-IDENTITY | 1.3.6.1.4.1.25506.2.75.7.2 | |||
| hh3cDot11QosStatisTable OBJECT-TYPE The table defines the attributes for the Qos feature of radio. | 1.3.6.1.4.1.25506.2.75.7.2.1 | not-accessible | current | |
| hh3cDot11QosStatisEntry OBJECT-TYPE Each entry contains information of the Qos attribute of each radio. | 1.3.6.1.4.1.25506.2.75.7.2.1.1 | not-accessible | current | |
| hh3cDot11QosAPID OBJECT-TYPE To uniquely identify a AP in running status. | 1.3.6.1.4.1.25506.2.75.7.2.1.1.1 | Hh3cDot11ObjectIDType | not-accessible | current |
| hh3cDot11QosRadioID OBJECT-TYPE Represents each radio. | 1.3.6.1.4.1.25506.2.75.7.2.1.1.2 | Hh3cDot11RadioScopeType | not-accessible | current |
| hh3cDot11QosAverageQueLen OBJECT-TYPE The average frame numbers to be sent out in the queue. | 1.3.6.1.4.1.25506.2.75.7.2.1.1.3 | Integer32 | read-only | current |
| hh3cDot11QosDropFrameRatio OBJECT-TYPE The ratio of dropped frames in a minute because of full queue. | 1.3.6.1.4.1.25506.2.75.7.2.1.1.4 | Integer32 | read-only | current |
| hh3cDot11QosAverageDataRate OBJECT-TYPE The average transmit data rate of radio. | 1.3.6.1.4.1.25506.2.75.7.2.1.1.5 | Integer32 | read-only | current |
| hh3cDot11QosAcStatisTable OBJECT-TYPE The table defines the parameters for Qos access category. | 1.3.6.1.4.1.25506.2.75.7.2.2 | not-accessible | current | |
| hh3cDot11QosAcStatisEntry OBJECT-TYPE Each entry contains information of each Qos access category. | 1.3.6.1.4.1.25506.2.75.7.2.2.1 | not-accessible | current | |
| hh3cDot11QosAcType OBJECT-TYPE The access category type. | 1.3.6.1.4.1.25506.2.75.7.2.2.1.1 | Hh3cDot11QosAcType | not-accessible | current |
| hh3cDot11AcDropFrameCnt OBJECT-TYPE The number of dropped frames in a minute for one specific access category because of full queue. | 1.3.6.1.4.1.25506.2.75.7.2.2.1.2 | Counter32 | read-only | current |