MIBs Depot

HH3C-DOT11-SA-MIB

Registered at
1.3.6.1.4.1.25506.2.75.13
Last updated
2011-08-26 20:00
Organization
New H3C Tech. Co., Ltd.
Revisions
2011-08-26 20:00
Namespace
comware
Source file
HH3C-DOT11-SA-MIB
Digest
sha256:c8509285ec06412c284052fc1510a358a929de19f8b3bde8edbfaae9b186ee9a

Description

This MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel.

Contact

Platform Team New H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085

Imports

FromSymbols
HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType, Hh3cDot11ObjectIDType, Hh3cDot11RadioScopeType, Hh3cDot11SaIntfDevType, hh3cDot11
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HH3C-DOT11-REF-MIB
HH3C-DOT11-SA-MIB
HH3C-OID-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hh3cDot11SaCfgGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.13.1
hh3cDot11SaCfgTable
OBJECT-TYPE
This table is used to configure spectrum analysis.
1.3.6.1.4.1.25506.2.75.13.1.1not-accessiblecurrent
hh3cDot11SaCfgEntry
OBJECT-TYPE
This entry contains the spectrum analysis configuration.
1.3.6.1.4.1.25506.2.75.13.1.1.1not-accessiblecurrent
hh3cDot11SaCfgRadioType
OBJECT-TYPE
Represents the radio type of the configuration.
1.3.6.1.4.1.25506.2.75.13.1.1.1.1INTEGER {dot11bg(1), dot11a(2)}not-accessiblecurrent
hh3cDot11SaEnable
OBJECT-TYPE
Represents whether spectrum analysis is enabled globally.
1.3.6.1.4.1.25506.2.75.13.1.1.1.2TruthValueread-writecurrent
hh3cDot11SaRptDevType
OBJECT-TYPE
Represents which types of interference devices should be reported.
1.3.6.1.4.1.25506.2.75.13.1.1.1.3Bits {microwave(0), microwaveInverter(1), bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5), fixedFreqAudio(6), freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11)}read-writecurrent
hh3cDot11SaTrapDevEnable
OBJECT-TYPE
Represents whether the interference device trap is enabled.
1.3.6.1.4.1.25506.2.75.13.1.1.1.4TruthValueread-writecurrent
hh3cDot11SaTrapDevType
OBJECT-TYPE
Represents which types of interference device will send traps when the interference device trap is enabled.
1.3.6.1.4.1.25506.2.75.13.1.1.1.5Bits {microwave(0), microwaveInverter(1), bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5), fixedFreqAudio(6), freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11)}read-writecurrent
hh3cDot11SaTrapAQEnable
OBJECT-TYPE
Represents whether the air quality trap is enabled.
1.3.6.1.4.1.25506.2.75.13.1.1.1.6TruthValueread-writecurrent
hh3cDot11SaTrapAQThreshold
OBJECT-TYPE
Represents the air quality trap threshold. When the air quality is below this value, the air quality trap will be sent.
1.3.6.1.4.1.25506.2.75.13.1.1.1.7Integer32 (1..100)read-writecurrent
hh3cDot11SaDrivenRRMEnable
OBJECT-TYPE
Configure whether to trigger RRM to run when an access point detects a certain level of interference.
1.3.6.1.4.1.25506.2.75.13.1.1.1.8TruthValueread-writecurrent
hh3cDot11SaDrivenRRMSnt
OBJECT-TYPE
Configure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity.
1.3.6.1.4.1.25506.2.75.13.1.1.1.9INTEGER {low(1), medium(2), high(3)}read-writecurrent
hh3cDot11SaStatusGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.13.2
hh3cDot11SaRtFFTDataTable
OBJECT-TYPE
This table contains the real-time FFT data for spectrum analysis.
1.3.6.1.4.1.25506.2.75.13.2.1not-accessiblecurrent
hh3cDot11SaRtFFTDataEntry
OBJECT-TYPE
This entry contains the real-time FFT data for spectrum analysis.
1.3.6.1.4.1.25506.2.75.13.2.1.1not-accessiblecurrent
hh3cDot11SaAPID
OBJECT-TYPE
Represents the serial ID of the AP.
1.3.6.1.4.1.25506.2.75.13.2.1.1.1Hh3cDot11ObjectIDTypenot-accessiblecurrent
hh3cDot11SaRadioID
OBJECT-TYPE
Represents the ID of the radio.
1.3.6.1.4.1.25506.2.75.13.2.1.1.2Hh3cDot11RadioScopeTypenot-accessiblecurrent
hh3cDot11SaRtDataGroupID
OBJECT-TYPE
Represents group ID of the collected data. Maybe the device collects multiple groups of data at the collected interval.
1.3.6.1.4.1.25506.2.75.13.2.1.1.3Integer32not-accessiblecurrent
hh3cDot11SaFrequency
OBJECT-TYPE
Represents the frequency number in 100 Hz.
1.3.6.1.4.1.25506.2.75.13.2.1.1.4Integer32not-accessiblecurrent
hh3cDot11SaRtFreqPower
OBJECT-TYPE
Represents the power of the frequency point.
1.3.6.1.4.1.25506.2.75.13.2.1.1.5Integer32read-onlycurrent
hh3cDot11SaRtFreqMaxPower
OBJECT-TYPE
Represents the max power of the frequency point.
1.3.6.1.4.1.25506.2.75.13.2.1.1.6Integer32read-onlycurrent
hh3cDot11SaRtFreqDutyCycle
OBJECT-TYPE
Represents the duty cycle of the frequency point.
1.3.6.1.4.1.25506.2.75.13.2.1.1.7Integer32read-onlycurrent
hh3cDot11SaRtFreqDataSeqNo
OBJECT-TYPE
Represents the sequence number of the data.
1.3.6.1.4.1.25506.2.75.13.2.1.1.8Unsigned32read-onlycurrent
hh3cDot11SaIntfDevTable
OBJECT-TYPE
This table contains the information of the interfering devices.
1.3.6.1.4.1.25506.2.75.13.2.2not-accessiblecurrent
hh3cDot11SaIntfDevEntry
OBJECT-TYPE
This entry contains the information of the interfering devices.
1.3.6.1.4.1.25506.2.75.13.2.2.1not-accessiblecurrent
hh3cDot11SaDevID
OBJECT-TYPE
Represents the device identification number that uniquely identified the interfering device.
1.3.6.1.4.1.25506.2.75.13.2.2.1.1Integer32not-accessiblecurrent
hh3cDot11SaDevType
OBJECT-TYPE
Represents type of the interferer.
1.3.6.1.4.1.25506.2.75.13.2.2.1.2Hh3cDot11SaIntfDevTyperead-onlycurrent
hh3cDot11SaDevSI
OBJECT-TYPE
Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).
1.3.6.1.4.1.25506.2.75.13.2.2.1.3Integer32read-onlycurrent
hh3cDot11SaDevRSSI
OBJECT-TYPE
Represents receive signal strength indicator (RSSI) of interfering device.
1.3.6.1.4.1.25506.2.75.13.2.2.1.4Integer32read-onlycurrent
hh3cDot11SaDevDutyCycle
OBJECT-TYPE
Represents proportion of time in percentage during which the interfering device was active.
1.3.6.1.4.1.25506.2.75.13.2.2.1.5Integer32read-onlycurrent
hh3cDot11SaDevAffectedChls
OBJECT-TYPE
Represents channels that the interfering device affects.
1.3.6.1.4.1.25506.2.75.13.2.2.1.6OCTET STRINGread-onlycurrent
hh3cDot11SaDevDetectedTime
OBJECT-TYPE
Represents time at which the interference was detected.
1.3.6.1.4.1.25506.2.75.13.2.2.1.7DateAndTimeread-onlycurrent
hh3cDot11SaAirQualityTable
OBJECT-TYPE
This table contains the air quality of the channels.
1.3.6.1.4.1.25506.2.75.13.2.3not-accessiblecurrent
hh3cDot11SaAirQualityEntry
OBJECT-TYPE
This entry contains the air quality of the channels.
1.3.6.1.4.1.25506.2.75.13.2.3.1not-accessiblecurrent
hh3cDot11SaChlNum
OBJECT-TYPE
Represents the radio channel where the air quality is monitored.
1.3.6.1.4.1.25506.2.75.13.2.3.1.1Hh3cDot11ChannelScopeTypenot-accessiblecurrent
hh3cDot11SaAvgQuality
OBJECT-TYPE
Represents the average air quality for this radio channel.
1.3.6.1.4.1.25506.2.75.13.2.3.1.2Integer32read-onlycurrent
hh3cDot11SaMinQuality
OBJECT-TYPE
Represents the minimum air quality for this radio channel.
1.3.6.1.4.1.25506.2.75.13.2.3.1.3Integer32read-onlycurrent
hh3cDot11SaIntfDevNum
OBJECT-TYPE
Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.
1.3.6.1.4.1.25506.2.75.13.2.3.1.4Integer32read-onlycurrent
hh3cDot11SaWiFiUtil
OBJECT-TYPE
Represents the percentage of the channel currently being used by Wi-Fi devices.
1.3.6.1.4.1.25506.2.75.13.2.3.1.5Integer32read-onlycurrent
hh3cDot11SaNonWiFiUtil
OBJECT-TYPE
Represents the percentage of the channel currently being used by non-Wi-Fi interference.
1.3.6.1.4.1.25506.2.75.13.2.3.1.6Integer32read-onlycurrent
hh3cDot11SaNoiseFloor
OBJECT-TYPE
Represents current noise floor recorded on the channel.
1.3.6.1.4.1.25506.2.75.13.2.3.1.7Integer32read-onlycurrent
hh3cDot11SaNotifyGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.13.3
hh3cDot11SaTraps
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.13.3.0
hh3cDot11SaTrapVars
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.13.3.1
hh3cDot11SaTrapAPID
OBJECT-TYPE
Represents the identifier of the AP.
1.3.6.1.4.1.25506.2.75.13.3.1.1Hh3cDot11ObjectIDTypeaccessible-for-notifycurrent
hh3cDot11SaTrapRadioID
OBJECT-TYPE
Represents the identifier of the radio.
1.3.6.1.4.1.25506.2.75.13.3.1.2Hh3cDot11RadioScopeTypeaccessible-for-notifycurrent
hh3cDot11SaTrapDevID
OBJECT-TYPE
Represents the device identification number that uniquely identified the interfering device.
1.3.6.1.4.1.25506.2.75.13.3.1.3Integer32accessible-for-notifycurrent
hh3cDot11SaTrapIntfDevType
OBJECT-TYPE
Represents type of the interferer.
1.3.6.1.4.1.25506.2.75.13.3.1.4Hh3cDot11SaIntfDevTypeaccessible-for-notifycurrent
hh3cDot11APTrapDevSI
OBJECT-TYPE
Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).
1.3.6.1.4.1.25506.2.75.13.3.1.5Integer32accessible-for-notifycurrent
hh3cDot11SaTrapDevRSSI
OBJECT-TYPE
Represents receive signal strength indicator (RSSI) of interfering device.
1.3.6.1.4.1.25506.2.75.13.3.1.6Integer32accessible-for-notifycurrent
hh3cDot11APTrapDevDC
OBJECT-TYPE
Represents proportion of time in percentage during which the interfering device was active.
1.3.6.1.4.1.25506.2.75.13.3.1.7Integer32accessible-for-notifycurrent
hh3cDot11APTrapDevChls
OBJECT-TYPE
Represents channels that the interfering device affects.
1.3.6.1.4.1.25506.2.75.13.3.1.8OCTET STRINGaccessible-for-notifycurrent
hh3cDot11APTrapDevDctTime
OBJECT-TYPE
Represents time at which the interference was detected.
1.3.6.1.4.1.25506.2.75.13.3.1.9DateAndTimeaccessible-for-notifycurrent
hh3cDot11SaTrapChlNum
OBJECT-TYPE
Represents the radio channel where the air quality is monitored.
1.3.6.1.4.1.25506.2.75.13.3.1.10Hh3cDot11ChannelScopeTypeaccessible-for-notifycurrent
hh3cDot11SaTrapChlQlt
OBJECT-TYPE
Represents the quality for this radio channel.
1.3.6.1.4.1.25506.2.75.13.3.1.11Integer32accessible-for-notifycurrent
hh3cDot11SaTrapChlIntfNum
OBJECT-TYPE
Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.
1.3.6.1.4.1.25506.2.75.13.3.1.12Integer32accessible-for-notifycurrent

Notifications

NameOIDStatus
hh3cDot11SaIntfDevDetected
NOTIFICATION-TYPE
Interfering device is detected.
1.3.6.1.4.1.25506.2.75.13.3.0.1current
hh3cDot11SaIntfDevDisappear
NOTIFICATION-TYPE
Interfering device disappeared.
1.3.6.1.4.1.25506.2.75.13.3.0.2current
hh3cDot11SaChlQltLow
NOTIFICATION-TYPE
The quality of the channel is below the specified threshold.
1.3.6.1.4.1.25506.2.75.13.3.0.3current
hh3cDot11SaChlQltRecover
NOTIFICATION-TYPE
The quality of the channel recovered from low status.
1.3.6.1.4.1.25506.2.75.13.3.0.4current