MIBs Depot

HH3C-DOT11-RRM-MIB

Registered at
1.3.6.1.4.1.25506.2.75.8
Last updated
2017-05-22 16:00
Organization
New H3C Technologies Co., Ltd.
Revisions
2017-05-22 16:00, 2010-09-25 18:00, 2010-02-23 18:00, 2009-08-01 20:00, 2009-05-07 20:00, 2009-04-17 20:00, 2008-07-14 14:29
Namespace
comware
Source file
HH3C-DOT11-RRM-MIB
Digest
sha256:8f8eed1a27fdf509fadd9aaf8cfaf204527c1a2c68a273b298a74289ad394a95

Description

This MIB file is to provide the object definition of WLAN radio resource management (RRM).

Contact

Platform Team New H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R.China Http://www.h3c.com Zip: 100085

Imports

FromSymbols
HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType, Hh3cDot11ObjectIDType, Hh3cDot11RadioElementIndex, Hh3cDot11RadioScopeType, Hh3cDot11RadioType, Hh3cDot11SSIDStringType, hh3cDot11, hh3cDot11APElementIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

HH3C-DOT11-REF-MIB
HH3C-DOT11-RRM-MIB
HH3C-OID-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hh3cDot11RRMConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.8.1
hh3cDot11RRMGlobalCfgPara
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.8.1.1
hh3cDot11RRM11nMadtMaxMcs
OBJECT-TYPE
Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is specified for 802.11n mandatory rates by default. Besides 255, the specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
1.3.6.1.4.1.25506.2.75.8.1.1.1Integer32 (0..76 | 255)read-writecurrent
hh3cDot11RRM11nSuptMaxMcs
OBJECT-TYPE
Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
1.3.6.1.4.1.25506.2.75.8.1.1.2Integer32 (0..76)read-writecurrent
hh3cDot11RRM11gProtect
OBJECT-TYPE
Enable/Disable dot11g protection.
1.3.6.1.4.1.25506.2.75.8.1.1.3TruthValueread-writecurrent
hh3cDot11RRM11aPwrConstrt
OBJECT-TYPE
Configure the power constraint for all 802.11a radios. The configured power constraint is advertised in beacons if spectrum management is enabled. The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER is defined by the regulatory domain).
1.3.6.1.4.1.25506.2.75.8.1.1.4Integer32read-writecurrent
hh3cDot11RRM11aSpectrumManag
OBJECT-TYPE
Enable/Disable spectrum management for 802.11a radios. When spectrum management is enabled, the WLAN sub-system advertises power capabilities of the AP and power constraints applicable to all devices in the BSS based on regulatory domain specification.
1.3.6.1.4.1.25506.2.75.8.1.1.5TruthValueread-writecurrent
hh3cDot11RRMAutoChlAvoid11h
OBJECT-TYPE
Configure the auto-channel set as non-dot11h channels, this is, only the non-dot11h channels belonging to the country code are scanned during initial channel selection and one of them is selected.
1.3.6.1.4.1.25506.2.75.8.1.1.6TruthValueread-writecurrent
hh3cDot11RRMScanChl
OBJECT-TYPE
Set the scan mode. auto: When this option is set, all channels of the country code being set are scanned. all: When this option is set, all the channels of the radio band are scanned.
1.3.6.1.4.1.25506.2.75.8.1.1.7INTEGER {auto(1), all(2)}read-writecurrent
hh3cDot11RRMScanRptIntvel
OBJECT-TYPE
Set the scan report interval.
1.3.6.1.4.1.25506.2.75.8.1.1.8Integer32 (5..120)read-writecurrent
hh3cDot11APInterfNumThreshhd
OBJECT-TYPE
Represents threshold of AP interference . If the value of AP interference exceeds this threshold, AP interference trap will be sent. If the value of this node is zero, AP interference trap will be sent immediately.
1.3.6.1.4.1.25506.2.75.8.1.1.9Integer32read-writecurrent
hh3cDot11StaInterfNumThreshhd
OBJECT-TYPE
Represents threshold of STA interference. If the value of STA interference exceeds this threshold, STA interference trap will be sent. If the value of this node is zero, STA interference trap will be sent immediately.
1.3.6.1.4.1.25506.2.75.8.1.1.10Integer32read-writecurrent
hh3cDot11RRM11nMultiCastMcs
OBJECT-TYPE
Specify the modulation and coding scheme (MCS) index for 802.11n multicast rates. The value 4294967295 indicates that no MCS index is specified. No MCS index is specified for 802.11n multicast rates by default. Besides 4294967295, the specified MCS index for 802.11n multicast rates must be no less than the specified maximum MCS index for 802.11n mandatory rates. Before configure the MCS index for 802.11n multicast rates, the maximum MCS index for 802.11n mandatory rates must be configured
1.3.6.1.4.1.25506.2.75.8.1.1.11Unsigned32 (0..76 | 4294967295)read-writecurrent
hh3cDot11RRM11acMadtMaxNss
OBJECT-TYPE
Specify the maximum NSS index for 802.11ac mandatory rates. The value 0 indicates that no maximum NSS index is specified. No maximum NSS index is specified for 802.11ac mandatory rates by default. The specified maximum NSS index for 802.11ac supported rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates.
1.3.6.1.4.1.25506.2.75.8.1.1.12Integer32 (0..8)read-writecurrent
hh3cDot11RRM11acSuptMaxNss
OBJECT-TYPE
Specify the maximum NSS index for 802.11ac supported rates. The specified maximum NSS index for 802.11ac supported rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates.
1.3.6.1.4.1.25506.2.75.8.1.1.13Integer32 (1..8)read-writecurrent
hh3cDot11RRM11acMultiCastNss
OBJECT-TYPE
Specify the NSS index for 802.11ac multicast rates. The value 0 indicates that no NSS index is specified. No NSS index is specified for 802.11ac multicast rates by default. The specified NSS index for 802.11ac multicast rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates. Before configuring the NSS index for 802.11ac multicast rates, the maximum NSS index for 802.11ac mandatory rates must be configured. Besides, it must be configured together with the node below.
1.3.6.1.4.1.25506.2.75.8.1.1.14Integer32 (0..8)read-writecurrent
hh3cDot11RRM11acMultiCastVhtMcs
OBJECT-TYPE
Specify the MCS index for 802.11ac multicast rates. The value 255 indicates that no MCS index is specified. No MCS index is specified for 802.11ac multicast rates by default. Besides, it must be configured together with the node above.
1.3.6.1.4.1.25506.2.75.8.1.1.15Integer32 (0..9 | 255)read-writecurrent
hh3cDot11RRMRadioCfgTable
OBJECT-TYPE
Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
1.3.6.1.4.1.25506.2.75.8.1.2not-accessiblecurrent
hh3cDot11RRMRadioCfgEntry
OBJECT-TYPE
Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
1.3.6.1.4.1.25506.2.75.8.1.2.1not-accessiblecurrent
hh3cDot11RRMRadioType
OBJECT-TYPE
802.11 radio type.
1.3.6.1.4.1.25506.2.75.8.1.2.1.1Hh3cDot11RadioTypenot-accessiblecurrent
hh3cDot11RRMCfgChlState
OBJECT-TYPE
Enable/Disable dynamic channel selection.
1.3.6.1.4.1.25506.2.75.8.1.2.1.2TruthValueread-writecurrent
hh3cDot11RRMCfgChlMode
OBJECT-TYPE
Configure the mode of channel selection. This node can be configured only when dynamic channel selection is enabled.
1.3.6.1.4.1.25506.2.75.8.1.2.1.3INTEGER {selfDecisive(1), userTriggered(2)}read-writecurrent
hh3cDot11RRMChlProntoRadioElmt
OBJECT-TYPE
Specify the AP and radio that will change channel at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of channel selection control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
1.3.6.1.4.1.25506.2.75.8.1.2.1.4Unsigned32read-writecurrent
hh3cDot11RRMCfgPwrState
OBJECT-TYPE
Enable/Disable dynamic power selection for the band.
1.3.6.1.4.1.25506.2.75.8.1.2.1.5TruthValueread-writecurrent
hh3cDot11RRMCfgPwrMode
OBJECT-TYPE
Configure the mode of transmit power control. This node can be configured only when dynamic power selection is enabled.
1.3.6.1.4.1.25506.2.75.8.1.2.1.6INTEGER {selfDecisive(1), userTriggered(2)}read-writecurrent
hh3cDot11RRMPwrProntoRadioElmt
OBJECT-TYPE
Specify the AP and radio that will change power at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of transmit power control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
1.3.6.1.4.1.25506.2.75.8.1.2.1.7Unsigned32read-writecurrent
hh3cDot11RRMCfgIntrvl
OBJECT-TYPE
Configure the calibration interval.
1.3.6.1.4.1.25506.2.75.8.1.2.1.8Integer32read-writecurrent
hh3cDot11RRMCfgIntrfThres
OBJECT-TYPE
Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation.
1.3.6.1.4.1.25506.2.75.8.1.2.1.9Integer32 (1..100)read-writecurrent
hh3cDot11RRMCfgNoiseThres
OBJECT-TYPE
Configure the noise threshold.
1.3.6.1.4.1.25506.2.75.8.1.2.1.10Integer32 (-127..127)read-writecurrent
hh3cDot11RRMCfgPERThres
OBJECT-TYPE
Configure the CRC error threshold. If the percentage of CRC errors reaches the threshold, RRM will perform resource adjustment to control the situation.
1.3.6.1.4.1.25506.2.75.8.1.2.1.11Integer32 (1..100)read-writecurrent
hh3cDot11RRMCfgToleranceFctr
OBJECT-TYPE
Configure the tolerance level. During dynamic frequency selection (DFS), the channel will be changed only if there is a better channel having lesser interference and packet error rate than those specified by the user.
1.3.6.1.4.1.25506.2.75.8.1.2.1.12Integer32 (1..45)read-writecurrent
hh3cDot11RRMCfgAdjacencyFctr
OBJECT-TYPE
Configure the adjacency factor for the band. If transmit power control (TPC) is configured, power will be adjusted when the nth neighbor is detected. The value n is the adjacency factor.
1.3.6.1.4.1.25506.2.75.8.1.2.1.13Integer32 (1..16)read-writecurrent
hh3cDot11RRMAPCfgTable
OBJECT-TYPE
This table defines the RRM parameters for AP.
1.3.6.1.4.1.25506.2.75.8.1.3not-accessiblecurrent
hh3cDot11RRMAPCfgEntry
OBJECT-TYPE
Each entry contains information of RRM parameters for AP.
1.3.6.1.4.1.25506.2.75.8.1.3.1not-accessiblecurrent
hh3cDot11RRMAPWorkMode
OBJECT-TYPE
AP work mode.
1.3.6.1.4.1.25506.2.75.8.1.3.1.1INTEGER {normal(1), monitor(2), hybrid(3)}read-writecurrent
hh3cDot11RRMSDRadioGroupTable
OBJECT-TYPE
This table defines RRM self-decisive radio group.
1.3.6.1.4.1.25506.2.75.8.1.4not-accessiblecurrent
hh3cDot11RRMSDRadioGroupEntry
OBJECT-TYPE
Each entry contains information of one RRM self-decisive radio group.
1.3.6.1.4.1.25506.2.75.8.1.4.1not-accessiblecurrent
hh3cDot11RRMSDRadioGroupId
OBJECT-TYPE
Represents RRM self-decisive radio group ID.
1.3.6.1.4.1.25506.2.75.8.1.4.1.1Unsigned32not-accessiblecurrent
hh3cDot11RRMSDRadioGroupDesc
OBJECT-TYPE
Represents the description of RRM self-decisive radio group.
1.3.6.1.4.1.25506.2.75.8.1.4.1.2OCTET STRINGread-createcurrent
hh3cDot11RRMSDRdGrpChlHolddownTm
OBJECT-TYPE
Represents the channel holddown time of RRM self-decisive radio group.
1.3.6.1.4.1.25506.2.75.8.1.4.1.3Unsigned32read-createcurrent
hh3cDot11RRMSDRdGrpPwrHolddownTm
OBJECT-TYPE
Represents the power holddown time of RRM self-decisive radio group.
1.3.6.1.4.1.25506.2.75.8.1.4.1.4Unsigned32read-createcurrent
hh3cDot11RRMSDRdGroupRowStatus
OBJECT-TYPE
The row status of this table entry.
1.3.6.1.4.1.25506.2.75.8.1.4.1.5RowStatusread-createcurrent
hh3cDot11RRMAPCfg2Table
OBJECT-TYPE
This table defines the RRM parameters for AP.
1.3.6.1.4.1.25506.2.75.8.1.5not-accessiblecurrent
hh3cDot11RRMAPCfg2Entry
OBJECT-TYPE
Each entry contains information of RRM parameters for AP.
1.3.6.1.4.1.25506.2.75.8.1.5.1not-accessiblecurrent
hh3cDot11RRMAPSerialID
OBJECT-TYPE
Serial ID of the AP.
1.3.6.1.4.1.25506.2.75.8.1.5.1.1Hh3cDot11ObjectIDTypenot-accessiblecurrent
hh3cDot11RRMAPIntfThreshold
OBJECT-TYPE
Represents threshold of AP interference . If the number of AP interference exceeds this threshold, AP interference trap will be sent.
1.3.6.1.4.1.25506.2.75.8.1.5.1.2Integer32read-writecurrent
hh3cDot11RRMStaIntfThreshold
OBJECT-TYPE
Represents threshold of STA interference. If the number of STA interference exceeds this threshold, station interference trap will be sent.
1.3.6.1.4.1.25506.2.75.8.1.5.1.3Integer32read-writecurrent
hh3cDot11RRMCoChlIntfTrapThhd
OBJECT-TYPE
Represents threshold of interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
1.3.6.1.4.1.25506.2.75.8.1.5.1.4Integer32read-writecurrent
hh3cDot11RRMAdjChlIntfTrapThhd
OBJECT-TYPE
Represents threshold of adjacent interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
1.3.6.1.4.1.25506.2.75.8.1.5.1.5Integer32read-writecurrent
hh3cDot11RRMDetectGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.8.2
hh3cDot11RRMChlRptTable
OBJECT-TYPE
This table shows the RRM channel information of each radio on all APs.
1.3.6.1.4.1.25506.2.75.8.2.1not-accessiblecurrent
hh3cDot11RRMChlRptEntry
OBJECT-TYPE
Each entry contains information of RRM channel information of the radio on the AP.
1.3.6.1.4.1.25506.2.75.8.2.1.1not-accessiblecurrent
hh3cDot11RRMRadioIndex
OBJECT-TYPE
Represents index of the radio.
1.3.6.1.4.1.25506.2.75.8.2.1.1.1Hh3cDot11RadioElementIndexaccessible-for-notifycurrent
hh3cDot11RRMChlRptChlNum
OBJECT-TYPE
Channel number.
1.3.6.1.4.1.25506.2.75.8.2.1.1.2Integer32accessible-for-notifycurrent
hh3cDot11RRMChlRptChlType
OBJECT-TYPE
Channel type.
1.3.6.1.4.1.25506.2.75.8.2.1.1.3INTEGER {primeChannel(1), offChannel(2)}read-onlycurrent
hh3cDot11RRMChlRptChlQlty
OBJECT-TYPE
Channel quality.
1.3.6.1.4.1.25506.2.75.8.2.1.1.4INTEGER {good(1), bad(2)}read-onlycurrent
hh3cDot11RRMChlRptNbrCnt
OBJECT-TYPE
Number of neighbors found on the channel.
1.3.6.1.4.1.25506.2.75.8.2.1.1.5Integer32read-onlycurrent
hh3cDot11RRMChlRptLoad
OBJECT-TYPE
Load observed on the channel in percentage.
1.3.6.1.4.1.25506.2.75.8.2.1.1.6Integer32 (0..100)read-onlycurrent
hh3cDot11RRMChlRptUtlz
OBJECT-TYPE
Utilization of the channel in percentage.
1.3.6.1.4.1.25506.2.75.8.2.1.1.7Integer32 (0..100)read-onlycurrent
hh3cDot11RRMChlRptIntrf
OBJECT-TYPE
Interference observed on the channel in percentage.
1.3.6.1.4.1.25506.2.75.8.2.1.1.8Integer32 (0..100)read-onlycurrent
hh3cDot11RRMChlRptPER
OBJECT-TYPE
Packet error rate observed on the channel in percentage.
1.3.6.1.4.1.25506.2.75.8.2.1.1.9Integer32 (0..100)read-onlycurrent
hh3cDot11RRMChlRptRetryRate
OBJECT-TYPE
Percentage of retransmission happened on the channel.
1.3.6.1.4.1.25506.2.75.8.2.1.1.10Integer32 (0..100)read-onlycurrent
hh3cDot11RRMChlRptNoise
OBJECT-TYPE
Noise observed on the channel.
1.3.6.1.4.1.25506.2.75.8.2.1.1.11Integer32read-onlycurrent
hh3cDot11RRMChlRptRadarIndtcr
OBJECT-TYPE
Radar detection status.
1.3.6.1.4.1.25506.2.75.8.2.1.1.12INTEGER {detected(1), notDetected(2)}read-writecurrent
hh3cDot11RRMNbrInfoTable
OBJECT-TYPE
This table shows the RRM neighbor information of each radio on all APs.
1.3.6.1.4.1.25506.2.75.8.2.2not-accessiblecurrent
hh3cDot11RRMNbrInfoEntry
OBJECT-TYPE
Each entry contains information of RRM neighbor information of the radio on an AP.
1.3.6.1.4.1.25506.2.75.8.2.2.1not-accessiblecurrent
hh3cDot11RrmNbrBSSID
OBJECT-TYPE
MAC address of the AP.
1.3.6.1.4.1.25506.2.75.8.2.2.1.1MacAddressnot-accessiblecurrent
hh3cDot11RrmNbrChl
OBJECT-TYPE
Channel number on which the neighbor was found.
1.3.6.1.4.1.25506.2.75.8.2.2.1.2Hh3cDot11ChannelScopeTyperead-onlycurrent
hh3cDot11RRMNbrIntrf
OBJECT-TYPE
Interference observed on the channel in percentage by neighbor.
1.3.6.1.4.1.25506.2.75.8.2.2.1.3Integer32 (0..100)read-onlycurrent
hh3cDot11RrmNbrRSSI
OBJECT-TYPE
Signal strength of the AP in dBm.
1.3.6.1.4.1.25506.2.75.8.2.2.1.4Integer32read-onlycurrent
hh3cDot11RrmNbrType
OBJECT-TYPE
Type of the AP, managed or unmanaged.
1.3.6.1.4.1.25506.2.75.8.2.2.1.5INTEGER {managed(1), unmanaged(2)}read-onlycurrent
hh3cDot11RrmNbrSSID
OBJECT-TYPE
SSID of the Neighbor.
1.3.6.1.4.1.25506.2.75.8.2.2.1.6Hh3cDot11SSIDStringTyperead-onlycurrent
hh3cDot11RrmNbrSNR
OBJECT-TYPE
Signal to noise ratio of the AP in dB.
1.3.6.1.4.1.25506.2.75.8.2.2.1.7Integer32read-onlycurrent
hh3cDot11RrmNbrNF
OBJECT-TYPE
Noise floor of the AP in dBm.
1.3.6.1.4.1.25506.2.75.8.2.2.1.8Integer32read-onlycurrent
hh3cDot11RRMHistoryTable
OBJECT-TYPE
This table shows the details of the latest three channel changes and power changes applied on all APs, including time of change, reason of the change and the channel, power, interference parameters.
1.3.6.1.4.1.25506.2.75.8.2.3not-accessiblecurrent
hh3cDot11RRMHistoryEntry
OBJECT-TYPE
Each entry shows the details of channel and power changes.
1.3.6.1.4.1.25506.2.75.8.2.3.1not-accessiblecurrent
hh3cDot11RRMHistoryId
OBJECT-TYPE
History number of the change.
1.3.6.1.4.1.25506.2.75.8.2.3.1.1Integer32not-accessiblecurrent
hh3cDot11RRMHistoryRecIndctr
OBJECT-TYPE
History record type of the change.
1.3.6.1.4.1.25506.2.75.8.2.3.1.2INTEGER {before(1), after(2)}not-accessiblecurrent
hh3cDot11RRMHistoryChl
OBJECT-TYPE
Channel on which the radio operates before/after the change of channel or power.
1.3.6.1.4.1.25506.2.75.8.2.3.1.3Hh3cDot11ChannelScopeTyperead-onlycurrent
hh3cDot11RRMHistoryPwr
OBJECT-TYPE
Power of the radio before/after the change of channel or power.
1.3.6.1.4.1.25506.2.75.8.2.3.1.4Integer32read-onlycurrent
hh3cDot11RRMHistoryLoad
OBJECT-TYPE
Load observed on the radio in percentage before/after the change of channel or power.
1.3.6.1.4.1.25506.2.75.8.2.3.1.5Integer32 (0..100)read-onlycurrent
hh3cDot11RRMHistoryUtlz
OBJECT-TYPE
Utilization of the radio in percentage before/after the change of channel or power.
1.3.6.1.4.1.25506.2.75.8.2.3.1.6Integer32 (0..100)read-onlycurrent
hh3cDot11RRMHistoryIntrf
OBJECT-TYPE
Interference observed on the radio in percentage before/after the change of channel or power.
1.3.6.1.4.1.25506.2.75.8.2.3.1.7Integer32 (0..100)read-onlycurrent
hh3cDot11RRMHistoryNoise
OBJECT-TYPE
Noise observed on the radio before/after the change of channel or power.
1.3.6.1.4.1.25506.2.75.8.2.3.1.8Integer32read-onlycurrent
hh3cDot11RRMHistoryPER
OBJECT-TYPE
Packet error rate observed on the radio in percentage before/after the change of channel or power.
1.3.6.1.4.1.25506.2.75.8.2.3.1.9Integer32 (0..100)read-onlycurrent
hh3cDot11RRMHistoryRetryRate
OBJECT-TYPE
Percentage of retransmission happened on the radio before/after the change of channel or power.
1.3.6.1.4.1.25506.2.75.8.2.3.1.10Integer32 (0..100)read-onlycurrent
hh3cDot11RRMHistoryChgReason
OBJECT-TYPE
Reason for the change of channel or power. The various bit positions are: |0 |Others | |1 |Coverage | |2 |Radar | |3 |Retransmission | |4 |Packets discarded | |5 |Interference | 0 is returned when the history record type is after.
1.3.6.1.4.1.25506.2.75.8.2.3.1.11Bits {others(0), coverage(1), radar(2), retransmission(3), packetsDiscarded(4), interference(5)}read-onlycurrent
hh3cDot11RRMHistoryChgDateTime
OBJECT-TYPE
The time when the channel or power change occurred.
1.3.6.1.4.1.25506.2.75.8.2.3.1.12DateAndTimeread-onlycurrent
hh3cDot11RRMRadioNbrInfoTable
OBJECT-TYPE
This table shows the RRM neighbor information of each radio on all APs.
1.3.6.1.4.1.25506.2.75.8.2.4not-accessiblecurrent
hh3cDot11RRMRadioNbrInfoEntry
OBJECT-TYPE
Each entry contains information of RRM neighbor information of the radio on an AP.
1.3.6.1.4.1.25506.2.75.8.2.4.1not-accessiblecurrent
hh3cDot11RRMRadioNbrAPID
OBJECT-TYPE
AP serial id.
1.3.6.1.4.1.25506.2.75.8.2.4.1.1Hh3cDot11ObjectIDTypenot-accessiblecurrent
hh3cDot11RRMRadioNbrRadioID
OBJECT-TYPE
Radio Id on AP.
1.3.6.1.4.1.25506.2.75.8.2.4.1.2Hh3cDot11RadioScopeTypenot-accessiblecurrent
hh3cDot11RRMRadioNbrSSID
OBJECT-TYPE
All neighbour SSIDs scanned by the selected radio.
1.3.6.1.4.1.25506.2.75.8.2.4.1.3OCTET STRINGread-onlycurrent
hh3cDot11RRMNotifyGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.8.3
hh3cDot11RRMChlQltyNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.8.3.1
hh3cDot11RRMChlQltyNtfPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.8.3.1.0
hh3cDot11RRMResChgNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.8.3.2
hh3cDot11RRMResChgNtfPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.8.3.2.0
hh3cDot11RRMNotificationsVar
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.8.3.3
hh3cDot11NewPower
OBJECT-TYPE
Power of the radio after the change of power.
1.3.6.1.4.1.25506.2.75.8.3.3.1Integer32accessible-for-notifycurrent
hh3cDot11OldPower
OBJECT-TYPE
Power of the radio before the change of power.
1.3.6.1.4.1.25506.2.75.8.3.3.2Integer32accessible-for-notifycurrent
hh3cDot11MonitorDetectedGroup
OBJECT-IDENTITY
1.3.6.1.4.1.25506.2.75.8.4
hh3cDot11MonitorDetectedDevTable
OBJECT-TYPE
This table shows the devices of AP detected
1.3.6.1.4.1.25506.2.75.8.4.1not-accessiblecurrent
hh3cDot11MonitorDetectedDevEntry
OBJECT-TYPE
Each entry contains information of detected devices.
1.3.6.1.4.1.25506.2.75.8.4.1.1not-accessiblecurrent
hh3cDot11MonitorDevMAC
OBJECT-TYPE
Represents MAC address of the device detected.
1.3.6.1.4.1.25506.2.75.8.4.1.1.1MacAddressnot-accessiblecurrent
hh3cDot11MonitorDevType
OBJECT-TYPE
Represents type of the device detected.
1.3.6.1.4.1.25506.2.75.8.4.1.1.2INTEGER {client(1), ap(2), adhoc(3), wirelessBridge(4), unknown(5)}read-onlycurrent
hh3cDot11MonitorDevVendor
OBJECT-TYPE
Represents vendor of the detected device.
1.3.6.1.4.1.25506.2.75.8.4.1.1.3OCTET STRINGread-onlycurrent
hh3cDot11MonitorDevSSID
OBJECT-TYPE
Represents the service set identifier for the ESS of the device which type is ap or adhoc.
1.3.6.1.4.1.25506.2.75.8.4.1.1.4OCTET STRINGread-onlycurrent
hh3cDot11MonitorDevBSSID
OBJECT-TYPE
Represents the basic service set identifier of the detected device.
1.3.6.1.4.1.25506.2.75.8.4.1.1.5MacAddressread-onlycurrent
hh3cDot11MonitorDevChannel
OBJECT-TYPE
Represents the channel in which the device was last detected. AP will choose the channel which has maximum signal strength as effective channel, as there is interference between adjacent channels.
1.3.6.1.4.1.25506.2.75.8.4.1.1.6Hh3cDot11ChannelScopeTyperead-onlycurrent
hh3cDot11MonitorRadioId
OBJECT-TYPE
Represents the radio ID of the AP that detected the device.
1.3.6.1.4.1.25506.2.75.8.4.1.1.7Hh3cDot11RadioScopeTyperead-onlycurrent
hh3cDot11MonitorDevMaxRSSI
OBJECT-TYPE
Represents the maximum detected RSSI of the device in a scan report cycle.
1.3.6.1.4.1.25506.2.75.8.4.1.1.8Integer32read-onlycurrent
hh3cDot11MonitorDevBeaconIntvl
OBJECT-TYPE
Represents the beacon interval for the detected device(not include the device which type is client).
1.3.6.1.4.1.25506.2.75.8.4.1.1.9Integer32read-onlycurrent
hh3cDot11MonitorDevFstDctTime
OBJECT-TYPE
Represents the time at which the device was first detected.
1.3.6.1.4.1.25506.2.75.8.4.1.1.10DateAndTimeread-onlycurrent
hh3cDot11MonitorDevLstDctTime
OBJECT-TYPE
Represents the time at which the device was detected last time.
1.3.6.1.4.1.25506.2.75.8.4.1.1.11DateAndTimeread-onlycurrent
hh3cDot11MonitorDevClear
OBJECT-TYPE
This object is used to clear the information of the device detected in the WLAN. It will return false for get operation.
1.3.6.1.4.1.25506.2.75.8.4.1.1.12TruthValueread-writecurrent
hh3cDot11MonitorDevSNR
OBJECT-TYPE
Represents the SNR of the device in a scan report cycle.
1.3.6.1.4.1.25506.2.75.8.4.1.1.13Integer32read-onlycurrent

Notifications

NameOIDStatus
hh3cDot11RRMIntrfLimit
NOTIFICATION-TYPE
This notification will be sent when interference on the radio exceeds the limit.
1.3.6.1.4.1.25506.2.75.8.3.1.0.1current
hh3cDot11RRMPERLimit
NOTIFICATION-TYPE
This notification will be sent when packet error rate on the radio exceeds the limit.
1.3.6.1.4.1.25506.2.75.8.3.1.0.2current
hh3cDot11RRMNoiseLimit
NOTIFICATION-TYPE
This notification will be sent when noise on the radio exceeds the limit.
1.3.6.1.4.1.25506.2.75.8.3.1.0.3current
hh3cDot11RRMPowerChange
NOTIFICATION-TYPE
This notification will be sent when power changed on the radio automatically.
1.3.6.1.4.1.25506.2.75.8.3.2.0.1current