MIBs Depot

H3C-PPP-OVER-SONET-MIB

Registered at
1.3.6.1.4.1.2011.10.2.19
Last updated
2010-05-19 17:00
Organization
Hangzhou H3C Tech. Co., Ltd.
Revisions
2010-05-19 17:00, 2007-07-19 17:00
Namespace
huawei
Source file
H3C-PPP-OVER-SONET-MIB
Digest
sha256:c183ee99cf9c5184bbdd3556a42c848bab1ee7b2b17c4c48812000636fb70ce8

Description

This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions.

Contact

Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085

Imports

FromSymbols
HUAWEI-3COM-OID-MIBh3cCommon
IF-MIBifDescr, ifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter64, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

H3C-PPP-OVER-SONET-MIB
HUAWEI-3COM-OID-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
h3cPosMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.19.1
h3cPosParamTable
OBJECT-TYPE
The pos parameter table.
1.3.6.1.4.1.2011.10.2.19.1.1not-accessiblecurrent
h3cPosParamTableEntry
OBJECT-TYPE
1.3.6.1.4.1.2011.10.2.19.1.1.1not-accessiblecurrent
h3cPosCRC
OBJECT-TYPE
The length of CRC
1.3.6.1.4.1.2011.10.2.19.1.1.1.1INTEGER {crc32(1), crc16(2)}read-writecurrent
h3cPosMTU
OBJECT-TYPE
Maximum Transfer Unit (MTU) of POS interface
1.3.6.1.4.1.2011.10.2.19.1.1.1.2INTEGER (64..9192)read-writecurrent
h3cPosScramble
OBJECT-TYPE
Scrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or not
1.3.6.1.4.1.2011.10.2.19.1.1.1.3TruthValueread-writecurrent
h3cPosClockSource
OBJECT-TYPE
The value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remote
1.3.6.1.4.1.2011.10.2.19.1.1.1.4INTEGER {system(1), line(2)}read-writecurrent
h3cPosSdhFlagJ0
OBJECT-TYPE
The section trace byte. This node is used when the frame type is sdh.
1.3.6.1.4.1.2011.10.2.19.1.1.1.5DisplayString (SIZE(0..15))read-writecurrent
h3cPosSdhFlagJ1
OBJECT-TYPE
The path trace byte. This node is used when the frame type is sdh.
1.3.6.1.4.1.2011.10.2.19.1.1.1.6DisplayString (SIZE(0..15))read-writecurrent
h3cPosSonetFlagJ0
OBJECT-TYPE
The section trace byte. This node is used when the frame type is sonet.
1.3.6.1.4.1.2011.10.2.19.1.1.1.7INTEGER (0..255)read-writecurrent
h3cPosSonetFlagJ1
OBJECT-TYPE
The path trace byte. This node is used when the frame type is sonet.
1.3.6.1.4.1.2011.10.2.19.1.1.1.8DisplayString (SIZE(0..62))read-writecurrent
h3cPosFlagC2
OBJECT-TYPE
The parameter for the channel signal value of C2 byte
1.3.6.1.4.1.2011.10.2.19.1.1.1.9INTEGER (0..255)read-writecurrent
h3cPosFrameType
OBJECT-TYPE
The frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network).
1.3.6.1.4.1.2011.10.2.19.1.1.1.10INTEGER {sdh(1), sonet(2)}read-writecurrent
h3cPosBindVlanId
OBJECT-TYPE
The vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link status or this pos.
1.3.6.1.4.1.2011.10.2.19.1.1.1.11INTEGER (0..4095)read-writecurrent
h3cPosEncapsulation
OBJECT-TYPE
The type of encapsulation
1.3.6.1.4.1.2011.10.2.19.1.1.1.12INTEGER {ppp(1), hdlc(2)}read-writecurrent
h3cPoskeepaliveTimeout
OBJECT-TYPE
The keeplive of hdlc. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link.
1.3.6.1.4.1.2011.10.2.19.1.1.1.13INTEGER (0..32767)read-writecurrent
h3cPosBERthresholdSF
OBJECT-TYPE
The bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold.
1.3.6.1.4.1.2011.10.2.19.1.1.1.14INTEGER (3..9)read-writecurrent
h3cPosBERthresholdSD
OBJECT-TYPE
The bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold.
1.3.6.1.4.1.2011.10.2.19.1.1.1.15INTEGER (3..9)read-writecurrent
h3cPosB1Error
OBJECT-TYPE
Counter for SBIPE(Section Bit Interleave Parity Error)
1.3.6.1.4.1.2011.10.2.19.1.1.1.16Counter64read-onlycurrent
h3cPosB2Error
OBJECT-TYPE
Counter for LBIPE(Line Bit Interleave Parity Error)
1.3.6.1.4.1.2011.10.2.19.1.1.1.17Counter64read-onlycurrent
h3cPosB3Error
OBJECT-TYPE
Counter for PBIPE(Path Bit Interleave Parity Error)
1.3.6.1.4.1.2011.10.2.19.1.1.1.18Counter64read-onlycurrent
h3cPosM1Error
OBJECT-TYPE
How many times does LREI(Line Remote Error Indication) occur
1.3.6.1.4.1.2011.10.2.19.1.1.1.19Counter64read-onlycurrent
h3cPosG1Error
OBJECT-TYPE
How many times does PREI(Path Remote Error Indication) occur
1.3.6.1.4.1.2011.10.2.19.1.1.1.20Counter64read-onlycurrent
h3cPosFlagJ0Type
OBJECT-TYPE
The frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.
1.3.6.1.4.1.2011.10.2.19.1.1.1.21INTEGER {sdh(1), sonet(2)}read-writecurrent
h3cPosFlagJ1Type
OBJECT-TYPE
The frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.
1.3.6.1.4.1.2011.10.2.19.1.1.1.22INTEGER {sdh(1), sonet(2)}read-writecurrent
h3cPosB1TCAThreshold
OBJECT-TYPE
Threshold for B1 TCA.
1.3.6.1.4.1.2011.10.2.19.1.1.1.23INTEGER (3..9)read-writecurrent
h3cPosB2TCAThreshold
OBJECT-TYPE
Threshold for B2 TCA.
1.3.6.1.4.1.2011.10.2.19.1.1.1.24INTEGER (3..9)read-writecurrent
h3cPosB3TCAThreshold
OBJECT-TYPE
Threshold for B3 TCA.
1.3.6.1.4.1.2011.10.2.19.1.1.1.25INTEGER (3..9)read-writecurrent
h3cPosB1TCAEnable
OBJECT-TYPE
Enable traps of B1 TCA.
1.3.6.1.4.1.2011.10.2.19.1.1.1.26INTEGER {enable(1), disable(2)}read-writecurrent
h3cPosB2TCAEnable
OBJECT-TYPE
Enable traps of B2 TCA.
1.3.6.1.4.1.2011.10.2.19.1.1.1.27INTEGER {enable(1), disable(2)}read-writecurrent
h3cPosB3TCAEnable
OBJECT-TYPE
Enable traps of B3 TCA.
1.3.6.1.4.1.2011.10.2.19.1.1.1.28INTEGER {enable(1), disable(2)}read-writecurrent
h3cPosMIBNotificationsPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.19.2
h3cPosMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.19.2.0

Notifications

NameOIDStatus
h3cPosLOSAlarm
NOTIFICATION-TYPE
Alarm indicates loss of signal
1.3.6.1.4.1.2011.10.2.19.2.0.1current
h3cPosLOFAlarm
NOTIFICATION-TYPE
Alarm indicates loss of frame
1.3.6.1.4.1.2011.10.2.19.2.0.2current
h3cPosOOFAlarm
NOTIFICATION-TYPE
Alarm indicates out of frame
1.3.6.1.4.1.2011.10.2.19.2.0.3current
h3cPosLAISAlarm
NOTIFICATION-TYPE
Alarm when LAIS(Line Alarm Indication Signal) arrives
1.3.6.1.4.1.2011.10.2.19.2.0.4current
h3cPosLRDIAlarm
NOTIFICATION-TYPE
Alarm when LRDI(Line Remote Defect Indication) arrives
1.3.6.1.4.1.2011.10.2.19.2.0.5current
h3cPosPRDIAlarm
NOTIFICATION-TYPE
Alarm when PRDI(Path Remote Defect Indication) arrives
1.3.6.1.4.1.2011.10.2.19.2.0.6current
h3cPosPAISAlarm
NOTIFICATION-TYPE
Alarm when PAIS(Path Alarm Indication Signal) arrives
1.3.6.1.4.1.2011.10.2.19.2.0.7current
h3cPosLOPAlarm
NOTIFICATION-TYPE
Alarm indicates loss of pointer
1.3.6.1.4.1.2011.10.2.19.2.0.8current
h3cPosSTIMAlarm
NOTIFICATION-TYPE
Alarm indicates inconsistency between sent and received J0 bytes.
1.3.6.1.4.1.2011.10.2.19.2.0.9current
h3cPosPTIMAlarm
NOTIFICATION-TYPE
Alarm indicates inconsistency between sent and received J1 bytes.
1.3.6.1.4.1.2011.10.2.19.2.0.10current
h3cPosPSLMAlarm
NOTIFICATION-TYPE
Alarm indicates a mismatched C2 byte.
1.3.6.1.4.1.2011.10.2.19.2.0.11current
h3cPosLSDAlarm
NOTIFICATION-TYPE
Alarm indicates that the B2 bit-error rate exceeds SD threshold.
1.3.6.1.4.1.2011.10.2.19.2.0.12current
h3cPosLSFAlarm
NOTIFICATION-TYPE
Alarm indicates that the B2 bit-error rate exceeds SF threshold.
1.3.6.1.4.1.2011.10.2.19.2.0.13current
h3cPosNormalAlarm
NOTIFICATION-TYPE
Alarm indicates that the Pos interface state returns normal.
1.3.6.1.4.1.2011.10.2.19.2.0.14current
h3cPosB1TCAlarm
NOTIFICATION-TYPE
Threshold crossing alarms for B1.
1.3.6.1.4.1.2011.10.2.19.2.0.15current
h3cPosB2TCAlarm
NOTIFICATION-TYPE
Threshold crossing alarms for B2.
1.3.6.1.4.1.2011.10.2.19.2.0.16current
h3cPosB3TCAlarm
NOTIFICATION-TYPE
Threshold crossing alarms for B3.
1.3.6.1.4.1.2011.10.2.19.2.0.17current