MIBs Depot

H3C-NQA-MIB

Registered at
1.3.6.1.4.1.2011.10.8.3
Last updated
2006-08-14 00:00
Organization
Huawei 3Com Technologies Co., Ltd.
Namespace
huawei
Source file
H3C-NQA-MIB
Digest
sha256:3c697f556203e769889ad48c1da12be71e73e2d6bb7d9a1c6cc4b648aa065e52

Description

The private mib file includes the test information of the device. It is supplementary for rfc2925.txt.

Contact

Platform Team Huawei 3Com Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.huawei-3com.com Zip:100085

Imports

FromSymbols
DISMAN-PING-MIBpingCtlDescr, pingCtlEntry, pingCtlOwnerIndex, pingCtlTargetAddress, pingCtlTargetAddressType, pingCtlTestName, pingCtlType
HUAWEI-3COM-OID-MIBh3cRhw
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DISMAN-PING-MIB
H3C-NQA-MIB
HUAWEI-3COM-OID-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
h3cNqaObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.8.3.1
h3cNqaMIBVersion
OBJECT-TYPE
Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB'
1.3.6.1.4.1.2011.10.8.3.1.1DisplayStringread-onlycurrent
h3cNqaCtlTable
OBJECT-TYPE
Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host.
1.3.6.1.4.1.2011.10.8.3.1.2not-accessiblecurrent
h3cNqaCtlEntry
OBJECT-TYPE
Defines an entry in the h3cNqaCtlTable. The operation of this table is same as that of pingResultsTable.
1.3.6.1.4.1.2011.10.8.3.1.2.1not-accessiblecurrent
h3cNqaCtlTargetPort
OBJECT-TYPE
The destination port that may be used by udpEcho, tcpConnect and jitter probes.
1.3.6.1.4.1.2011.10.8.3.1.2.1.1Integer32 (0..65536)read-createcurrent
h3cNqaCtlSourcePort
OBJECT-TYPE
The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port.
1.3.6.1.4.1.2011.10.8.3.1.2.1.2Integer32 (0..65536)read-createcurrent
h3cNqaCtlTTL
OBJECT-TYPE
Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe.
1.3.6.1.4.1.2011.10.8.3.1.2.1.3Integer32read-createcurrent
h3cNqaCtlJitterAdminInterval
OBJECT-TYPE
Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test.
1.3.6.1.4.1.2011.10.8.3.1.2.1.4Integer32 (0..60000)read-createcurrent
h3cNqaCtlJitterAdminNumPackets
OBJECT-TYPE
Packet number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test.
1.3.6.1.4.1.2011.10.8.3.1.2.1.5Integer32read-createcurrent
h3cNqaCtlHttpOperationType
OBJECT-TYPE
Http operation type: get or post.
1.3.6.1.4.1.2011.10.8.3.1.2.1.6INTEGER {get(1), post(2)}read-createcurrent
h3cNqaCtlHttpOperationString
OBJECT-TYPE
Http operation string. For example, if the http operation type is get, the string will be url, home page and http version.
1.3.6.1.4.1.2011.10.8.3.1.2.1.7DisplayString (SIZE(0..255))read-createcurrent
h3cNqaCtlFtpOperationType
OBJECT-TYPE
Ftp operation type.
1.3.6.1.4.1.2011.10.8.3.1.2.1.8INTEGER {get(1), put(2)}read-createcurrent
h3cNqaCtlFtpUsername
OBJECT-TYPE
Ftp username.
1.3.6.1.4.1.2011.10.8.3.1.2.1.9DisplayString (SIZE(0..32))read-createcurrent
h3cNqaCtlFtpPassword
OBJECT-TYPE
Ftp password.
1.3.6.1.4.1.2011.10.8.3.1.2.1.10DisplayString (SIZE(0..32))read-createcurrent
h3cNqaCtlFtpOperationString
OBJECT-TYPE
Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server.
1.3.6.1.4.1.2011.10.8.3.1.2.1.11DisplayString (SIZE(0..255))read-createcurrent
h3cNqaCtlVPNInstance
OBJECT-TYPE
VPN name by which system finds route in the specified VPN to send NQA probe packets.
1.3.6.1.4.1.2011.10.8.3.1.2.1.12DisplayString (SIZE(0..255))read-createcurrent
h3cNqaCtlHistoryKeptTime
OBJECT-TYPE
To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped.
1.3.6.1.4.1.2011.10.8.3.1.2.1.13Integer32 (1..1440)read-createcurrent
h3cNqaCtlHistoryEnable
OBJECT-TYPE
To indicate whether the history should be recorded in the PingProbeHistoryTable or not. enabled(1) --history will be recorded disabled(2) --history will not be recorded.
1.3.6.1.4.1.2011.10.8.3.1.2.1.14INTEGER {enabled(1), disabled(2)}read-createcurrent
h3cNqaCtlICPIFAdvFactor
OBJECT-TYPE
The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. Suggestion values: |-----------------------------------|-------| | Service |factor | |-----------------------------------|-------| |conventional wire-line | 0 | |-----------------------------------|-------| |mobility within Building | 5 | |-----------------------------------|-------| |mobility within geographical area | 10 | |-----------------------------------|-------| |access to hard-to-reach location | 20 | |-----------------------------------|-------|
1.3.6.1.4.1.2011.10.8.3.1.2.1.15Integer32read-createcurrent
h3cNqaCtlCodecType
OBJECT-TYPE
To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.
1.3.6.1.4.1.2011.10.8.3.1.2.1.16INTEGER {notDefined(1), g711Alaw(2), g711Ulaw(3), g729A(4), icmpTimestamp(5)}read-createcurrent
h3cNqaResultsTable
OBJECT-TYPE
Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in the h3cNqaResultsTable. The operation of this table is same as that of pingResultsTable.
1.3.6.1.4.1.2011.10.8.3.1.3not-accessiblecurrent
h3cNqaResultsEntry
OBJECT-TYPE
The operation of this table is same as that of pingResultsTable.
1.3.6.1.4.1.2011.10.8.3.1.3.1not-accessiblecurrent
h3cNqaResultsRttNumDisconnects
OBJECT-TYPE
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.2011.10.8.3.1.3.1.1Unsigned32read-onlycurrent
h3cNqaResultsRttTimeouts
OBJECT-TYPE
The number of times that a NQA probe failed because the probe timed out.
1.3.6.1.4.1.2011.10.8.3.1.3.1.2Unsigned32read-onlycurrent
h3cNqaResultsRttBusies
OBJECT-TYPE
The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The next test will not start until the next Frequency.
1.3.6.1.4.1.2011.10.8.3.1.3.1.3Unsigned32read-onlycurrent
h3cNqaResultsRttNoConnections
OBJECT-TYPE
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.2011.10.8.3.1.3.1.4Unsigned32read-onlycurrent
h3cNqaResultsRttDrops
OBJECT-TYPE
The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources.
1.3.6.1.4.1.2011.10.8.3.1.3.1.5Unsigned32read-onlycurrent
h3cNqaResultsRttSequenceErrors
OBJECT-TYPE
The number of packets arrived out of sequence.
1.3.6.1.4.1.2011.10.8.3.1.3.1.6Unsigned32read-onlycurrent
h3cNqaResultsRttStatsErrors
OBJECT-TYPE
The number of some other errors.
1.3.6.1.4.1.2011.10.8.3.1.3.1.7Unsigned32read-onlycurrent
h3cNqaResultsMaxDelaySD
OBJECT-TYPE
The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0.
1.3.6.1.4.1.2011.10.8.3.1.3.1.8Unsigned32read-onlycurrent
h3cNqaResultsMaxDelayDS
OBJECT-TYPE
The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitter test, if destination system time is not valid, the DS delay may be set 0.
1.3.6.1.4.1.2011.10.8.3.1.3.1.9Unsigned32read-onlycurrent
h3cNqaResultsLostPacketRatio
OBJECT-TYPE
The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets.
1.3.6.1.4.1.2011.10.8.3.1.3.1.10Unsigned32read-onlycurrent
h3cNqaResultsPacketLateArrival
OBJECT-TYPE
The value of this object indicates the number of the packets that arrived after the timeout.
1.3.6.1.4.1.2011.10.8.3.1.3.1.11Unsigned32read-onlycurrent
h3cNqaResultsRttSum
OBJECT-TYPE
The sum of round trip time.
1.3.6.1.4.1.2011.10.8.3.1.3.1.12Unsigned32read-onlycurrent
h3cNqaResultsNumOfDelaySD
OBJECT-TYPE
The number of delay from source to destination that are successfully measured.
1.3.6.1.4.1.2011.10.8.3.1.3.1.13Unsigned32read-onlycurrent
h3cNqaResultsMinDelaySD
OBJECT-TYPE
The minimum of all one way times from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.3.1.14Unsigned32read-onlycurrent
h3cNqaResultsSumDelaySD
OBJECT-TYPE
The sum of one way times from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.3.1.15Unsigned32read-onlycurrent
h3cNqaResultsSum2DelaySD
OBJECT-TYPE
The sum of squares of one way times from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.3.1.16Unsigned32read-onlycurrent
h3cNqaResultsNumOfDelayDS
OBJECT-TYPE
The number of delay from destination to source that are successfully measured.
1.3.6.1.4.1.2011.10.8.3.1.3.1.17Unsigned32read-onlycurrent
h3cNqaResultsMinDelayDS
OBJECT-TYPE
The minimum of all one way times from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.3.1.18Unsigned32read-onlycurrent
h3cNqaResultsSumDelayDS
OBJECT-TYPE
The sum of one way times from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.3.1.19Unsigned32read-onlycurrent
h3cNqaResultsSum2DelayDS
OBJECT-TYPE
The sum of squares of one way times from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.3.1.20Unsigned32read-onlycurrent
h3cNqaJitterStatsTable
OBJECT-TYPE
Statistics table for latest jitter activity.
1.3.6.1.4.1.2011.10.8.3.1.4not-accessiblecurrent
h3cNqaJitterStatsEntry
OBJECT-TYPE
An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is h3cNqajitter.
1.3.6.1.4.1.2011.10.8.3.1.4.1not-accessiblecurrent
h3cNqaJitterStatsNumOfRTT
OBJECT-TYPE
The number of received destination device responses with which jitter test can reach round-trip time.
1.3.6.1.4.1.2011.10.8.3.1.4.1.1Counter32read-onlycurrent
h3cNqaJitterStatsMinOfPositivesSD
OBJECT-TYPE
The value of time that records the minimal positive jitter value from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.2Gauge32read-onlycurrent
h3cNqaJitterStatsMaxOfPositivesSD
OBJECT-TYPE
The value of time that records the maximal positive jitter value from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.3Gauge32read-onlycurrent
h3cNqaJitterStatsNumOfPositivesSD
OBJECT-TYPE
The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets sent from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.4.1.4Gauge32read-onlycurrent
h3cNqaJitterStatsSumOfPositivesSD
OBJECT-TYPE
The value of time that records the sum of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.5Gauge32read-onlycurrent
h3cNqaJitterStatsSum2PositivesSD
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.6Gauge32read-onlycurrent
h3cNqaJitterStatsMinOfNegativesSD
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.7Gauge32read-onlycurrent
h3cNqaJitterStatsMaxOfNegativesSD
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.8Gauge32read-onlycurrent
h3cNqaJitterStatsNumOfNegativesSD
OBJECT-TYPE
The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.4.1.9Gauge32read-onlycurrent
h3cNqaJitterStatsSumOfNegativesSD
OBJECT-TYPE
The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative jitters in packets sent from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.4.1.10Gauge32read-onlycurrent
h3cNqaJitterStatsSum2NegativesSD
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.11Gauge32read-onlycurrent
h3cNqaJitterStatsMinOfPositivesDS
OBJECT-TYPE
The value of time that records the minimal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.12Gauge32read-onlycurrent
h3cNqaJitterStatsMaxOfPositivesDS
OBJECT-TYPE
The value of time that records the maximal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.13Gauge32read-onlycurrent
h3cNqaJitterStatsNumOfPositivesDS
OBJECT-TYPE
The number that records positive jitter times from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.14Gauge32read-onlycurrent
h3cNqaJitterStatsSumOfPositivesDS
OBJECT-TYPE
The value of time that records the sum of positive jitter values from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.15Gauge32read-onlycurrent
h3cNqaJitterStatsSum2PositivesDS
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.16Gauge32read-onlycurrent
h3cNqaJitterStatsMinOfNegativesDS
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.17Gauge32read-onlycurrent
h3cNqaJitterStatsMaxOfNegativesDS
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.18Gauge32read-onlycurrent
h3cNqaJitterStatsNumOfNegativesDS
OBJECT-TYPE
The number that records negative jitter times from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.19Gauge32read-onlycurrent
h3cNqaJitterStatsSumOfNegativesDS
OBJECT-TYPE
The value of time that records the sum of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.20Gauge32read-onlycurrent
h3cNqaJitterStatsSum2NegativesDS
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.21Gauge32read-onlycurrent
h3cNqaJitterStatsPacketLossSD
OBJECT-TYPE
The lost packets number sent from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.4.1.22Gauge32read-onlycurrent
h3cNqaJitterStatsPacketLossDS
OBJECT-TYPE
The lost packets number sent from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.4.1.23Gauge32read-onlycurrent
h3cNqaJitterStatsAvePositivesSD
OBJECT-TYPE
The value of time that records the average positive jitter value from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.4.1.24Gauge32read-onlycurrent
h3cNqaJitterStatsAveNegativesSD
OBJECT-TYPE
The value of time that records the average negative jitter value from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.4.1.25Gauge32read-onlycurrent
h3cNqaJitterStatsAvePositivesDS
OBJECT-TYPE
The value of time that records the average positive jitter value from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.4.1.26Gauge32read-onlycurrent
h3cNqaJitterStatsAveNegativesDS
OBJECT-TYPE
The value of time that records the average negative jitter value from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.4.1.27Gauge32read-onlycurrent
h3cNqaJitterStatsPktLossUnknown
OBJECT-TYPE
The number of packets which is lost with unknown reason.
1.3.6.1.4.1.2011.10.8.3.1.4.1.28Gauge32read-onlycurrent
h3cNqaJitterStatsOperOfICPIF
OBJECT-TYPE
The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.29Gauge32read-onlycurrent
h3cNqaJitterStatsOperOfMOS
OBJECT-TYPE
The MOS (Mean Opinion Score) value for the latest jitter test.
1.3.6.1.4.1.2011.10.8.3.1.4.1.30Gauge32read-onlycurrent
h3cNqaAgentEnable
OBJECT-TYPE
Enable NQA agent function.
1.3.6.1.4.1.2011.10.8.3.1.5INTEGER {enable(1), disable(2)}read-writecurrent
h3cNqaTcpServerTable
OBJECT-TYPE
A table which contains the status of NQA tcp server configuration information.
1.3.6.1.4.1.2011.10.8.3.1.6not-accessiblecurrent
h3cNqaTcpServerEntry
OBJECT-TYPE
A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server port.
1.3.6.1.4.1.2011.10.8.3.1.6.1not-accessiblecurrent
h3cNqaTcpServerIpAddress
OBJECT-TYPE
Tcp server's ip address.
1.3.6.1.4.1.2011.10.8.3.1.6.1.1InetAddressnot-accessiblecurrent
h3cNqaTcpServerPort
OBJECT-TYPE
Tcp server's port number.
1.3.6.1.4.1.2011.10.8.3.1.6.1.2Integer32 (0..65536)not-accessiblecurrent
h3cNqaTcpServerRowStatus
OBJECT-TYPE
h3cNqaTcpServerIpAddress and h3cNqaTcpServerPort must be set during a creation operation.
1.3.6.1.4.1.2011.10.8.3.1.6.1.3RowStatusread-createcurrent
h3cNqaUdpServerTable
OBJECT-TYPE
Status of NQA udp server configuration information.
1.3.6.1.4.1.2011.10.8.3.1.7not-accessiblecurrent
h3cNqaUdpServerEntry
OBJECT-TYPE
This entry includes not only the udp server ip address but also the udp server udp port.
1.3.6.1.4.1.2011.10.8.3.1.7.1not-accessiblecurrent
h3cNqaUdpServerIpAddress
OBJECT-TYPE
Udp server's ip address.
1.3.6.1.4.1.2011.10.8.3.1.7.1.1InetAddressnot-accessiblecurrent
h3cNqaUdpServerPort
OBJECT-TYPE
Udp server's port number.
1.3.6.1.4.1.2011.10.8.3.1.7.1.2Integer32 (0..65536)not-accessiblecurrent
h3cNqaUdpServerRowStatus
OBJECT-TYPE
h3cNqaUdpServerIpAddress and h3cNqaUdpServerPort must be set during a creation operation.
1.3.6.1.4.1.2011.10.8.3.1.7.1.3RowStatusread-createcurrent
h3cNqaServerEnable
OBJECT-TYPE
Enable NQA server function.
1.3.6.1.4.1.2011.10.8.3.1.8INTEGER {enable(1), disable(2)}read-writecurrent
h3cNqaStatsMaxGroupNumber
OBJECT-TYPE
The maximum number saved per group. The maximum value of h3cNqaCtlStatisticsGroupNumber can not exceed the value of this object.
1.3.6.1.4.1.2011.10.8.3.1.9Integer32read-onlycurrent
h3cNqaStatisticsCtlTable
OBJECT-TYPE
Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations are stored in the h3cNqaStatisticsResultsTable and the h3cNqaGroupStatsJitterTable.
1.3.6.1.4.1.2011.10.8.3.1.10not-accessiblecurrent
h3cNqaStatisticsCtlEntry
OBJECT-TYPE
Defines an entry in the h3cNqaStatisticsCtlTable. The h3cNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a h3cNqaStatisticsCtlTable to correspond to the pingCtlEntry.
1.3.6.1.4.1.2011.10.8.3.1.10.1not-accessiblecurrent
h3cNqaCtlStatisticsInterval
OBJECT-TYPE
Statistic information will be calculated after the time that is the value of h3cNqaCtlStatisticsInterval.
1.3.6.1.4.1.2011.10.8.3.1.10.1.1Unsigned32read-createcurrent
h3cNqaCtlStatisticsGroupNumber
OBJECT-TYPE
The value of this object indicates the number of group saved. The length of this object is from 1 to h3cNqaStatsMaxGroupNumber.
1.3.6.1.4.1.2011.10.8.3.1.10.1.2Unsigned32read-createcurrent
h3cNqaCtlStatisticsKeptTime
OBJECT-TYPE
To indicate how long the statistic information will be saved after the test stops.
1.3.6.1.4.1.2011.10.8.3.1.10.1.3Unsigned32 (1..1440)read-createcurrent
h3cNqaCtlBeginTime
OBJECT-TYPE
Time at which the type-specified test will start.
1.3.6.1.4.1.2011.10.8.3.1.10.1.4DateAndTimeread-createcurrent
h3cNqaCtlLifeTime
OBJECT-TYPE
To indicate how long the type-specified test will last.
1.3.6.1.4.1.2011.10.8.3.1.10.1.5Unsigned32read-createcurrent
h3cNqaStatisticsResultsTable
OBJECT-TYPE
Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations in a statistic cycle are stored in the h3cNqaStatisticsResultsTable. The statistic cycle is the value of h3cNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that the probe statistics result (H3cNqaStatisticsResultsEntry) belongs to.
1.3.6.1.4.1.2011.10.8.3.1.11not-accessiblecurrent
h3cNqaStatisticsResultsEntry
OBJECT-TYPE
Defines an entry in the h3cNqaStatisticsResultsTable. The h3cNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a h3cNqaStatisticsResultsEntry to correspond to the pingCtlEntry that caused it to be created.
1.3.6.1.4.1.2011.10.8.3.1.11.1not-accessiblecurrent
h3cNqaStatResIndex
OBJECT-TYPE
An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning h3cNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
1.3.6.1.4.1.2011.10.8.3.1.11.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
h3cNqaStatResIpTargetAddressType
OBJECT-TYPE
This object indicates the type of address stored in the corresponding h3cNqaStatResIpTargetAddress object.
1.3.6.1.4.1.2011.10.8.3.1.11.1.2InetAddressTyperead-onlycurrent
h3cNqaStatResIpTargetAddress
OBJECT-TYPE
This object represent the host address to be used at a remote host for performing a network analysis operation.
1.3.6.1.4.1.2011.10.8.3.1.11.1.3InetAddressread-onlycurrent
h3cNqaStatResMinRtt
OBJECT-TYPE
The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
1.3.6.1.4.1.2011.10.8.3.1.11.1.4Gauge32read-onlycurrent
h3cNqaStatResMaxRtt
OBJECT-TYPE
The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
1.3.6.1.4.1.2011.10.8.3.1.11.1.5Gauge32read-onlycurrent
h3cNqaStatResAverageRtt
OBJECT-TYPE
The average NQA probe round-trip-time (RTT).
1.3.6.1.4.1.2011.10.8.3.1.11.1.6Gauge32read-onlycurrent
h3cNqaStatResProbeResponses
OBJECT-TYPE
The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.
1.3.6.1.4.1.2011.10.8.3.1.11.1.7Counter32read-onlycurrent
h3cNqaStatResSentProbes
OBJECT-TYPE
The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent.
1.3.6.1.4.1.2011.10.8.3.1.11.1.8Counter32read-onlycurrent
h3cNqaStatResRttSumOfSquares
OBJECT-TYPE
This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.
1.3.6.1.4.1.2011.10.8.3.1.11.1.9Counter32read-onlycurrent
h3cNqaStatResStartTime
OBJECT-TYPE
This object contains the start time of the statistic.
1.3.6.1.4.1.2011.10.8.3.1.11.1.10DateAndTimeread-onlycurrent
h3cNqaStatResInterval
OBJECT-TYPE
This object contains the interval between two times of statistic.
1.3.6.1.4.1.2011.10.8.3.1.11.1.11Gauge32read-onlycurrent
h3cNqaStatResRttNumDisconnects
OBJECT-TYPE
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.2011.10.8.3.1.11.1.12Counter32read-onlycurrent
h3cNqaStatResRttTimeouts
OBJECT-TYPE
The number of times that a probe failed because the probe timed out.
1.3.6.1.4.1.2011.10.8.3.1.11.1.13Counter32read-onlycurrent
h3cNqaStatResRttBusies
OBJECT-TYPE
The number of times that a NQA probe failed because errors related to sockets.
1.3.6.1.4.1.2011.10.8.3.1.11.1.14Counter32read-onlycurrent
h3cNqaStatResRttNoConnections
OBJECT-TYPE
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
1.3.6.1.4.1.2011.10.8.3.1.11.1.15Counter32read-onlycurrent
h3cNqaStatResRttDrops
OBJECT-TYPE
The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.
1.3.6.1.4.1.2011.10.8.3.1.11.1.16Counter32read-onlycurrent
h3cNqaStatResRttSequenceErrors
OBJECT-TYPE
The number of packets arrived out of sequence.
1.3.6.1.4.1.2011.10.8.3.1.11.1.17Counter32read-onlycurrent
h3cNqaStatResRttErrors
OBJECT-TYPE
The number of other errors.
1.3.6.1.4.1.2011.10.8.3.1.11.1.18Counter32read-onlycurrent
h3cNqaStatResLostPacketRatio
OBJECT-TYPE
The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent packets.
1.3.6.1.4.1.2011.10.8.3.1.11.1.19Gauge32read-onlycurrent
h3cNqaStatResPacketLateArrival
OBJECT-TYPE
The value of this object reflects the number of the packets that arrived after the timeout.
1.3.6.1.4.1.2011.10.8.3.1.11.1.20Counter32read-onlycurrent
h3cNqaStatResRttSum
OBJECT-TYPE
This object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received.
1.3.6.1.4.1.2011.10.8.3.1.11.1.21Counter32read-onlycurrent
h3cNqaStatResNumOfDelaySD
OBJECT-TYPE
The number of one way times from source to destination that are successfully measured.
1.3.6.1.4.1.2011.10.8.3.1.11.1.22Counter32read-onlycurrent
h3cNqaStatResMinDelaySD
OBJECT-TYPE
The minimum one way times from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.11.1.23Gauge32read-onlycurrent
h3cNqaStatResMaxDelaySD
OBJECT-TYPE
The maximum one way times from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.11.1.24Gauge32read-onlycurrent
h3cNqaStatResSumDelaySD
OBJECT-TYPE
The sum of one way times from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.11.1.25Counter32read-onlycurrent
h3cNqaStatResSum2DelaySD
OBJECT-TYPE
The sum of squares of one way times from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.11.1.26Counter32read-onlycurrent
h3cNqaStatResNumOfDelayDS
OBJECT-TYPE
The number of one way times from destination to source that are successfully measured.
1.3.6.1.4.1.2011.10.8.3.1.11.1.27Counter32read-onlycurrent
h3cNqaStatResMinDelayDS
OBJECT-TYPE
The minimum one way times from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.11.1.28Gauge32read-onlycurrent
h3cNqaStatResMaxDelayDS
OBJECT-TYPE
The maximum one way times from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.11.1.29Gauge32read-onlycurrent
h3cNqaStatResSumDelayDS
OBJECT-TYPE
The sum of one way times from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.11.1.30Counter32read-onlycurrent
h3cNqaStatResSum2DelayDS
OBJECT-TYPE
The sum of squares of one way times from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.11.1.31Counter32read-onlycurrent
h3cNqaGroupStatsJitterTable
OBJECT-TYPE
Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of h3cNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that a probe statistics result (H3cNqaStatisticsResultsEntry) belongs to.
1.3.6.1.4.1.2011.10.8.3.1.12not-accessiblecurrent
h3cNqaGroupStatsJitterEntry
OBJECT-TYPE
An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is h3cNqajitter.
1.3.6.1.4.1.2011.10.8.3.1.12.1not-accessiblecurrent
h3cNqaStatJitterIndex
OBJECT-TYPE
An entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning h3cNqaStatJitterIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
1.3.6.1.4.1.2011.10.8.3.1.12.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
h3cNqaStatJitterMinOfPosSD
OBJECT-TYPE
The value of time that records the minimal positive jitter value from source to destination in jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.2Gauge32read-onlycurrent
h3cNqaStatJitterMaxOfPosSD
OBJECT-TYPE
The value of time that records the maximal positive jitter value from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.3Gauge32read-onlycurrent
h3cNqaStatJitterNumOfPosSD
OBJECT-TYPE
The number that records positive jitter times from source to destination in the jitter test. The total number of all positive jitter values in packets sent from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.12.1.4Counter32read-onlycurrent
h3cNqaStatJitterSumOfPosSD
OBJECT-TYPE
The value of time that records the sum of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.5Counter32read-onlycurrent
h3cNqaStatJitterSumOfSquarePosSD
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.6Counter32read-onlycurrent
h3cNqaStatJitterMinOfNegSD
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.7Gauge32read-onlycurrent
h3cNqaStatJitterMaxOfNegSD
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.8Gauge32read-onlycurrent
h3cNqaStatJitterNumOfNegSD
OBJECT-TYPE
The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values sent from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.12.1.9Counter32read-onlycurrent
h3cNqaStatJitterSumOfNegSD
OBJECT-TYPE
The value of time that records the sum of negative jitter values from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.10Counter32read-onlycurrent
h3cNqaStatJitterSumOfSquareNegSD
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.11Counter32read-onlycurrent
h3cNqaStatJitterMinOfPosDS
OBJECT-TYPE
The value of time that records the minimal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.12Gauge32read-onlycurrent
h3cNqaStatJitterMaxOfPosDS
OBJECT-TYPE
The value of time that records the maximal positive jitter value from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.13Gauge32read-onlycurrent
h3cNqaStatJitterNumOfPosDS
OBJECT-TYPE
The number that records positive jitter times from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.14Counter32read-onlycurrent
h3cNqaStatJitterSumOfPosDS
OBJECT-TYPE
The value of time that records the sum of positive jitter values from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.15Counter32read-onlycurrent
h3cNqaStatJitterSumOfSquarePosDS
OBJECT-TYPE
The value of time that records the sum of square of positive jitter values destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.16Counter32read-onlycurrent
h3cNqaStatJitterMinOfNegDS
OBJECT-TYPE
The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.17Gauge32read-onlycurrent
h3cNqaStatJitterMaxOfNegDS
OBJECT-TYPE
The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.18Gauge32read-onlycurrent
h3cNqaStatJitterNumOfNegDS
OBJECT-TYPE
The number that records negative jitter times from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.19Counter32read-onlycurrent
h3cNqaStatJitterSumOfNegDS
OBJECT-TYPE
The value of time that records the sum of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.20Counter32read-onlycurrent
h3cNqaStatJitterSumOfSquareNegDS
OBJECT-TYPE
The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.21Counter32read-onlycurrent
h3cNqaStatJitterPacketLossSD
OBJECT-TYPE
The lost packets number sent from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.12.1.22Counter32read-onlycurrent
h3cNqaStatJitterPacketLossDS
OBJECT-TYPE
The lost packets number sent from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.12.1.23Counter32read-onlycurrent
h3cNqaStatJitterAvePosSD
OBJECT-TYPE
The value of time that records the average positive jitter value from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.12.1.24Gauge32read-onlycurrent
h3cNqaStatJitterAveNegSD
OBJECT-TYPE
The value of time that records the average negative jitter value from source to destination.
1.3.6.1.4.1.2011.10.8.3.1.12.1.25Gauge32read-onlycurrent
h3cNqaStatJitterAvePosDS
OBJECT-TYPE
The value of time that records the average positive jitter value from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.12.1.26Gauge32read-onlycurrent
h3cNqaStatJitterAveNegDS
OBJECT-TYPE
The value of time that records the average negative jitter value from destination to source.
1.3.6.1.4.1.2011.10.8.3.1.12.1.27Gauge32read-onlycurrent
h3cNqaStatJitterPktLossUnknown
OBJECT-TYPE
The number of packets which is lost with unknown reason.
1.3.6.1.4.1.2011.10.8.3.1.12.1.28Counter32read-onlycurrent
h3cNqaStatJitterMaxOfICPIF
OBJECT-TYPE
The maximum of all ICPIF values in a statistic cycle for jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.29Gauge32read-onlycurrent
h3cNqaStatJitterMinOfICPIF
OBJECT-TYPE
The minimum of all ICPIF values in a statistic cycle for jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.30Gauge32read-onlycurrent
h3cNqaStatJitterMaxOfMOS
OBJECT-TYPE
The maximum of all MOS values in a statistic cycle for jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.31Gauge32read-onlycurrent
h3cNqaStatJitterMinOfMOS
OBJECT-TYPE
The minimum of all MOS values in a statistic cycle for jitter test.
1.3.6.1.4.1.2011.10.8.3.1.12.1.32Gauge32read-onlycurrent
h3cNqaReactionTable
OBJECT-TYPE
A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
1.3.6.1.4.1.2011.10.8.3.1.13not-accessiblecurrent
h3cNqaReactionEntry
OBJECT-TYPE
Defines an entry in the h3cNqaReactionTable. The first two index elements identify the pingCtlEntry that a h3cNqaReactItemIndex belongs to. The third index element selects a single reaction.
1.3.6.1.4.1.2011.10.8.3.1.13.1not-accessiblecurrent
h3cNqaReactOwnerIndex
OBJECT-TYPE
The first index of h3cNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. h3cNqaReactOwnerIndex and h3cNqaReactTestName identify an existed test.
1.3.6.1.4.1.2011.10.8.3.1.13.1.1SnmpAdminString (SIZE(0..32))accessible-for-notifycurrent
h3cNqaReactTestName
OBJECT-TYPE
The second index of h3cNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. h3cNqaReactOwnerIndex and h3cNqaReactTestName identify an existed test.
1.3.6.1.4.1.2011.10.8.3.1.13.1.2SnmpAdminString (SIZE(0..32))accessible-for-notifycurrent
h3cNqaReactItemIndex
OBJECT-TYPE
The third index of h3cNqaReactionTable, it definitely identifies one of the reaction configurations for a test.
1.3.6.1.4.1.2011.10.8.3.1.13.1.3Unsigned32 (1..10)accessible-for-notifycurrent
h3cNqaReactCheckedElement
OBJECT-TYPE
A list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not h3cNqajitter. 'jitterOwdSD': one way time from source to destination in jitter test. 'jitterOwdDS': one way time from destination to source in jitter test. 'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds', 'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType of the test is h3cNqajitter. 'icpif' and 'mos' are valid when pingCtlType of the test is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
1.3.6.1.4.1.2011.10.8.3.1.13.1.4INTEGER {probetime(1), probefailure(2), jitterrtt(3), jitterpacketloss(4), jittersd(5), jitterds(6), icpif(7), mos(8), jitterOwdSD(9), jitterOwdDS(10)}read-createcurrent
h3cNqaReactThresholdUpperLimit
OBJECT-TYPE
This object defines an administrative upper-threshold value for h3cNqaReactCheckedElement. The value of this object is zero if h3cNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
1.3.6.1.4.1.2011.10.8.3.1.13.1.5Unsigned32read-createcurrent
h3cNqaReactThresholdLowerLimit
OBJECT-TYPE
This object defines an administrative lower-threshold value for h3cNqaReactCheckedElement. The value of h3cNqaReactThresholdLowerLimit should be equal or less than the value of h3cNqaReactThresholdUpperLimit. The value of this object is zero if h3cNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
1.3.6.1.4.1.2011.10.8.3.1.13.1.6Unsigned32read-createcurrent
h3cNqaReactThresholdType
OBJECT-TYPE
This object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched operation exceeds threshold limit, an action specified in h3cNqaReactActionType is generated when h3cNqaReactCurrentStatus changes. consecutive(2): If reaction threshold type is consecutive and the times of watched operation consecutively exceeds the limit specified by h3cNqaReactThresholdConsecNum, an action specified in h3cNqaReactActionType is generated when h3cNqaReactCurrentStatus changes. accumulative(3): If reaction threshold type is accumulative and the times of watched operation accumulatively exceeds the limit specified by h3cNqaReactThresholdAccumNum, an action specified in h3cNqaReactActionType is generated when h3cNqaReactCurrentStatus changes. If reaction threshold type is not configured, the value of this object is 'invalid'.
1.3.6.1.4.1.2011.10.8.3.1.13.1.7INTEGER {invalid(0), average(1), consecutive(2), accumulative(3)}read-createcurrent
h3cNqaReactThresholdConsecNum
OBJECT-TYPE
This object defines a consecutive threshold limit. The value is zero when h3cNqaReactThresholdType is not 'consecutive'.
1.3.6.1.4.1.2011.10.8.3.1.13.1.8Unsigned32read-createcurrent
h3cNqaReactThresholdAccumNum
OBJECT-TYPE
This object defines an accumulative threshold limit. The value is zero when the h3cNqaReactThresholdType is not 'accumulative'.
1.3.6.1.4.1.2011.10.8.3.1.13.1.9Unsigned32read-createcurrent
h3cNqaReactActionType
OBJECT-TYPE
Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap is generated triggerOnly - All trigger actions defined for this entry are generated trapAndTrigger - Both a trap and all trigger actions are generated
1.3.6.1.4.1.2011.10.8.3.1.13.1.10INTEGER {none(0), trapOnly(1), triggerOnly(2), trapAndTrigger(3)}read-createcurrent
h3cNqaReactCurrentStatus
OBJECT-TYPE
Specifies the current status of this reaction entry: invalid - Specifies the reaction entry status is uncertain. overThreshold - Specifies the reaction entry has met the h3cNqaReactThresholdType and the threshold value. belowThreshold - Specifies the reaction entry has disobeyed the h3cNqaReactThresholdType and the threshold value.
1.3.6.1.4.1.2011.10.8.3.1.13.1.11INTEGER {invalid(1), overThreshold(2), belowThreshold(3)}read-onlycurrent
h3cNqaReactRowStatus
OBJECT-TYPE
This object allows entries to be created and deleted in the h3cNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurations which take effect immediately. Deletion of an entry in this table results in corresponding reaction configurations are being deleted and stop taking effect.
1.3.6.1.4.1.2011.10.8.3.1.13.1.12RowStatusread-createcurrent
h3cNqaReactCheckedNum
OBJECT-TYPE
The number of checked element samples that are monitored.
1.3.6.1.4.1.2011.10.8.3.1.13.1.13Unsigned32read-onlycurrent
h3cNqaReactThresholdNum
OBJECT-TYPE
The number of checked element samples that are over threshold.
1.3.6.1.4.1.2011.10.8.3.1.13.1.14Unsigned32read-onlycurrent
h3cNqaStatisticsReactionTable
OBJECT-TYPE
A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
1.3.6.1.4.1.2011.10.8.3.1.14not-accessiblecurrent
h3cNqaStatisticsReactionEntry
OBJECT-TYPE
Defines an entry in the h3cNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a h3cNqaReactItemIndex belongs to. The third index element identifies an entry in the h3cNqaStatisticsResultsTable. The forth index element selects a single reaction.
1.3.6.1.4.1.2011.10.8.3.1.14.1not-accessiblecurrent
h3cNqaStatReactOwnerIndex
OBJECT-TYPE
The first index of h3cNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable.
1.3.6.1.4.1.2011.10.8.3.1.14.1.1SnmpAdminString (SIZE(0..32))not-accessiblecurrent
h3cNqaStatReactTestName
OBJECT-TYPE
The second index of h3cNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable.
1.3.6.1.4.1.2011.10.8.3.1.14.1.2SnmpAdminString (SIZE(0..32))not-accessiblecurrent
h3cNqaStatReactIndex
OBJECT-TYPE
The third index of h3cNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning h3cNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
1.3.6.1.4.1.2011.10.8.3.1.14.1.3Unsigned32not-accessiblecurrent
h3cNqaStatReactItemIndex
OBJECT-TYPE
The forth index of h3cNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test
1.3.6.1.4.1.2011.10.8.3.1.14.1.4Unsigned32not-accessiblecurrent
h3cNqaStatReactCheckedNum
OBJECT-TYPE
The number of checked element samples that are monitored.
1.3.6.1.4.1.2011.10.8.3.1.14.1.5Counter32read-onlycurrent
h3cNqaStatReactThresholdNum
OBJECT-TYPE
The number of checked element samples that are over threshold.
1.3.6.1.4.1.2011.10.8.3.1.14.1.6Counter32read-onlycurrent
h3cNqaImplementationTypeDomains
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.8.3.2
h3cNqaUdpEcho
OBJECT-IDENTITY
Indicates that an implementation is using the UDP based echo server. Notes: The h3cNqaCtlTargetPort and h3cNqaCtlSourcePort need to be set, while in the pingUdpEcho Node, h3cNqaCtlTargetPort must be set to the default value.
1.3.6.1.4.1.2011.10.8.3.2.1current
h3cNqaTcpconnect
OBJECT-IDENTITY
Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The h3cNqaCtlTargetPort and h3cNqaCtlSourcePort need to be set, while in the pingTcpConnectionAttempt Node, h3cNqaCtlTargetPort must be set to the default value.
1.3.6.1.4.1.2011.10.8.3.2.2current
h3cNqajitter
OBJECT-IDENTITY
Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance analysis.
1.3.6.1.4.1.2011.10.8.3.2.3current
h3cNqaHttp
OBJECT-IDENTITY
Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL.
1.3.6.1.4.1.2011.10.8.3.2.4current
h3cNqadlsw
OBJECT-IDENTITY
Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the response time of a DLSw peer.
1.3.6.1.4.1.2011.10.8.3.2.5current
h3cNqadhcp
OBJECT-IDENTITY
Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown operation.
1.3.6.1.4.1.2011.10.8.3.2.6current
h3cNqaftp
OBJECT-IDENTITY
Indicates that an implementation is using tcp packet for ftp connect and data transfer.
1.3.6.1.4.1.2011.10.8.3.2.7current
h3cNqaNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.8.3.3

Notifications

NameOIDStatus
h3cNqaProbeTimeOverThreshold
NOTIFICATION-TYPE
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdConsecNum. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not h3cNqajitter.
1.3.6.1.4.1.2011.10.8.3.3.1current
h3cNqaJitterRTTOverThreshold
NOTIFICATION-TYPE
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum in one test. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter.
1.3.6.1.4.1.2011.10.8.3.3.2current
h3cNqaProbeFailure
NOTIFICATION-TYPE
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the probe test accumulatively failed for a number of times specified in h3cNqaReactThresholdAccumNum in one test while the value of h3cNqaReactThresholdType is 'accumulative'. 2. When the probe test consecutively failed for a number of times specified in h3cNqaReactThresholdConsecNum in one test while the value of h3cNqaReactThresholdType is 'consecutive'. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not h3cNqajitter.
1.3.6.1.4.1.2011.10.8.3.3.3current
h3cNqaJitterPacketLoss
NOTIFICATION-TYPE
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the jitter packets accumulatively lost for a number of times specified in h3cNqaReactThresholdAccumNum in one test while the value of h3cNqaReactThresholdType is 'accumulative'. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter.
1.3.6.1.4.1.2011.10.8.3.3.4current
h3cNqaJitterSDOverThreshold
NOTIFICATION-TYPE
The SD means the jitter values from source to destination. It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit and the h3cNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum and the h3cNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter.
1.3.6.1.4.1.2011.10.8.3.3.5current
h3cNqaJitterDSOverThreshold
NOTIFICATION-TYPE
The DS means the jitter values from destination to source. It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of DS in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit and the h3cNqaReactThresholdType is specified as 'average' type. 2. The average of DS in one jitter test is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum and the h3cNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter.
1.3.6.1.4.1.2011.10.8.3.3.6current
h3cNqaICPIFOverThreshold
NOTIFICATION-TYPE
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the ICPIF value in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
1.3.6.1.4.1.2011.10.8.3.3.7current
h3cNqaMOSOverThreshold
NOTIFICATION-TYPE
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the MOS value in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
1.3.6.1.4.1.2011.10.8.3.3.8current