MIBs Depot

H3C-NAT-MIB

Registered at
1.3.6.1.4.1.2011.10.2.18
Last updated
2004-09-17 01:00
Organization
Huawei-3Com Technologies Co., Ltd.
Revisions
2005-01-20 15:18
Namespace
huawei
Source file
H3C-NAT-MIB
Digest
sha256:e66efc9875566286ebbd0328657fe8134edc74cfab0791ccb688a804d8f5bc20

Description

This MIB contains objects to manage configuration of NAT. There are no constraints on this MIB.

Contact

http://www.huawei-3com.com

Imports

FromSymbols
HUAWEI-3COM-OID-MIBh3cCommon
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

H3C-NAT-MIB
HUAWEI-3COM-OID-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
h3cNATGlobalVars
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.18.1
h3cNATClearSession
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.18.1.1
h3cNATClearSessionSlotNo
OBJECT-TYPE
The number of NAT board in which administrator wants to clear data of the session. In router, the value is 255 because no NAT board in it. This node only supports 'set' operation. The return value of 'get' operation is meaningless.
1.3.6.1.4.1.2011.10.2.18.1.1.1INTEGER (1..14 | 255)read-writecurrent
h3cNATBLConnectLimitPara
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.18.1.2
h3cNATBLConnectHighValue
OBJECT-TYPE
The maximal connection amount. If the connection amount exceeds the value, the IP address will be added into blacklist. The IP address will not be removed from blacklist until the connection amount is less than the minimal connection amount.
1.3.6.1.4.1.2011.10.2.18.1.2.1INTEGER (20..20000)read-writecurrent
h3cNATBLConnectLowValue
OBJECT-TYPE
The minimal connection amount.
1.3.6.1.4.1.2011.10.2.18.1.2.2INTEGER (20..20000)read-writecurrent
h3cNATBLConnectHighRate
OBJECT-TYPE
The maximal connection rate(in second). If the connection rate exceed the value, the IP address will be added into blacklist. The IP address will not be removed from blacklist until the connection rate is less than the minimal connection rate.
1.3.6.1.4.1.2011.10.2.18.1.2.3INTEGER (20..21474836)read-writecurrent
h3cNATBLConnectLowRate
OBJECT-TYPE
The minimal connection rate(in second).
1.3.6.1.4.1.2011.10.2.18.1.2.4INTEGER (20..21474836)read-writecurrent
h3cNATBLSpecialConnectHighRate
OBJECT-TYPE
The maximal special connection rate(in second). When administrator wants to control the speed of connection, he can selects the connection speed rate or special connection rate.
1.3.6.1.4.1.2011.10.2.18.1.2.5INTEGER (20..21474836)read-writecurrent
h3cNATBLSpecialConnectLowRate
OBJECT-TYPE
The minimal special connection rate(in second).
1.3.6.1.4.1.2011.10.2.18.1.2.6INTEGER (20..21474836)read-writecurrent
h3cNATBLCtrlEnable
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.18.1.3
h3cNATBLConnectSumEnable
OBJECT-TYPE
Enable or disable the connection amount control.
1.3.6.1.4.1.2011.10.2.18.1.3.1INTEGER {enable(1), disable(2)}read-writecurrent
h3cNATBLConnectRateEnable
OBJECT-TYPE
Enable or disable the connection rate control.
1.3.6.1.4.1.2011.10.2.18.1.3.2INTEGER {enable(1), disable(2)}read-writecurrent
h3cNATNPTimer
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.18.1.4
h3cNATNPAgingTime
OBJECT-TYPE
There are two kinds of aging time in NP. One is fast and the other is slow. Administrator can select one or other. The defalult is fast.
1.3.6.1.4.1.2011.10.2.18.1.4.1INTEGER {fast(1), slow(2)}read-writecurrent
h3cNATMibObjects
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.18.2
h3cNATPoolInfoTable
OBJECT-TYPE
NAT address pool table : The address in the pool is the IP address in the global network. The pool can span 255 IP addresses.All address pools configured by administrator are recorded in this table.
1.3.6.1.4.1.2011.10.2.18.2.1not-accessiblecurrent
h3cNATPoolInfoEntry
OBJECT-TYPE
The entry of NAT address pool table.
1.3.6.1.4.1.2011.10.2.18.2.1.1not-accessiblecurrent
h3cNATPoolIdx
OBJECT-TYPE
Index of the address pool: The index uniquely indicates the address pool in the system, and its range is from 1 to 320.
1.3.6.1.4.1.2011.10.2.18.2.1.1.1Integer32 (1..320)not-accessiblecurrent
h3cNATPoolStartIpAddr
OBJECT-TYPE
The start IP address of address pool: It must be less than or equal to the end IP address.
1.3.6.1.4.1.2011.10.2.18.2.1.1.2IpAddressread-createcurrent
h3cNATPoolEndIpAddr
OBJECT-TYPE
The end IP address of address pool: It must be more than or equal to the start IP address.
1.3.6.1.4.1.2011.10.2.18.2.1.1.3IpAddressread-createcurrent
h3cNATPoolSlotNo
OBJECT-TYPE
The number of NAT board to which the address pool is bound. The address translation is processed by this NAT board . The relation between address pool and slotNo is n:1. When the address pool is not bound to the NAT board,the value is 255.
1.3.6.1.4.1.2011.10.2.18.2.1.1.4INTEGER (1..14 | 255)read-createcurrent
h3cNATPoolRefCounter
OBJECT-TYPE
The counter of reference. A address pool can be associated with more than one ACL and the counter of reference is recorded in this field. When the address pool is not associated with ACL, the value is 0.
1.3.6.1.4.1.2011.10.2.18.2.1.1.5Integer32read-createcurrent
h3cNATPoolRowStatus
OBJECT-TYPE
Only support 'destroy' and 'createAndGo'. If h3cNATPoolIdx, h3cNATPoolStartIpAddr and h3cNATPoolEndIpAddr were provided correctly, its value is changed 'active'.
1.3.6.1.4.1.2011.10.2.18.2.1.1.6RowStatusread-createcurrent
h3cNATOutboundTable
OBJECT-TYPE
NAT out bound table: through associating ACL number, address pool with NAT board, administrator can designate which inside IP address can be translated to global IP address in the pool and the translation is processed by which NAT board.
1.3.6.1.4.1.2011.10.2.18.2.2not-accessiblecurrent
h3cNATOutboundEntry
OBJECT-TYPE
The entry of NAT out bound table.
1.3.6.1.4.1.2011.10.2.18.2.2.1not-accessiblecurrent
h3cNATOutboundAclNo
OBJECT-TYPE
The number of ACL(Access Control List). When the packet accords with the rule in the ACL, its source IP address will be translated to IP address in Address pool.
1.3.6.1.4.1.2011.10.2.18.2.2.1.1INTEGER (2000..3999)not-accessiblecurrent
h3cNATOutboundPoolIdx
OBJECT-TYPE
The index of address pool in h3cNATPoolInfoTable. when administrator doesn't use the address pool and use the IP address of the interface as the address of global network, the value is 2147483647.
1.3.6.1.4.1.2011.10.2.18.2.2.1.2INTEGER (0..320 | 2147483647)read-createcurrent
h3cNATOutboundIsNoPat
OBJECT-TYPE
Whether to use no pat manner. The translation of no pat is that the translation doesn't use the port information of packet.
1.3.6.1.4.1.2011.10.2.18.2.2.1.3INTEGER {true(1), false(2)}read-createcurrent
h3cNATOutboundSlotNo
OBJECT-TYPE
The number of NAT board. In router, the value is 255 because no NAT board in it.
1.3.6.1.4.1.2011.10.2.18.2.2.1.4Integer32 (1..14 | 255)read-createcurrent
h3cNATOutboundRowStatus
OBJECT-TYPE
Only support 'destroy' and 'createAndGo'. If h3cNATOutboundAclNo or h3cNATOutboundAclNo and h3cNATOutboundPoolIdx were provided correctly, its value is changed 'active'.
1.3.6.1.4.1.2011.10.2.18.2.2.1.5RowStatusread-createcurrent
h3cNATServerTable
OBJECT-TYPE
NAT inside Server Table. Administrator can configure server in the private network which can provide service for people in the public network. The translation map is : (InsideIP , InsidePort--> GlobalIP, GlobalPort ) (InsideIP + 1 , InsidePort--> GlobalIP, GlobalPort + 1) (InsideIP + 2 , InsidePort--> GlobalIP, GlobalPort + 2) ... ... ... (InsideIP+n(=InsideIP2),InsidePort--> GlobalIP,GlobalPort+n(=GlobalPort2))
1.3.6.1.4.1.2011.10.2.18.2.3not-accessiblecurrent
h3cNATServerEntry
OBJECT-TYPE
The entry of NAT inside server table.
1.3.6.1.4.1.2011.10.2.18.2.3.1not-accessiblecurrent
h3cNATServerProType
OBJECT-TYPE
The type of protocol: icmp(1), tcp(6), udp(17) and others.
1.3.6.1.4.1.2011.10.2.18.2.3.1.1INTEGER (1..255)not-accessiblecurrent
h3cNATServerGlobalIP
OBJECT-TYPE
The global IP address of Inside Server.
1.3.6.1.4.1.2011.10.2.18.2.3.1.2IpAddressnot-accessiblecurrent
h3cNATServerStartGlobalPort
OBJECT-TYPE
The start global port of Inside Server. When the port need not be configured, the value is 0.
1.3.6.1.4.1.2011.10.2.18.2.3.1.3INTEGER (0..65535)not-accessiblecurrent
h3cNATServerEndGlobalPort
OBJECT-TYPE
The end global port of Inside Server. When administrator doesn't configure a series of inside server, the value is 0. If the value is not zero, the value of (GlobalPort2-GlobalPort) must be equal to (InsideIP2 - InsideIP).
1.3.6.1.4.1.2011.10.2.18.2.3.1.4INTEGER (0..65535)read-createcurrent
h3cNATServerStartInsideIP
OBJECT-TYPE
The start private IP address of Inside Server.
1.3.6.1.4.1.2011.10.2.18.2.3.1.5IpAddressread-createcurrent
h3cNATServerEndInsideIP
OBJECT-TYPE
The end private IP address of Inside Server. When administrator doesn't configure a series of inside server, the value is 0.0.0.0.
1.3.6.1.4.1.2011.10.2.18.2.3.1.6IpAddressread-createcurrent
h3cNATServerInsidePort
OBJECT-TYPE
The private port of Inside Server.
1.3.6.1.4.1.2011.10.2.18.2.3.1.7INTEGER (0..65535)read-createcurrent
h3cNATServerSlotNo
OBJECT-TYPE
The number of NAT board. In router, the value is 255 because no NAT board in it.
1.3.6.1.4.1.2011.10.2.18.2.3.1.8Integer32 (1..14 | 255)read-createcurrent
h3cNATServerVpnIndex
OBJECT-TYPE
The VPN index of server.
1.3.6.1.4.1.2011.10.2.18.2.3.1.10Integer32 (0..65535)not-accessiblecurrent
h3cNATServerAclNumber
OBJECT-TYPE
Number of basic or advanced acl.
1.3.6.1.4.1.2011.10.2.18.2.3.1.11Integer32 (1..10000)read-createcurrent
h3cNATServerRowStatus
OBJECT-TYPE
Only support 'destroy' and 'createAndGo'. If h3cNATServerProType, h3cNATServerGlobalIP, h3cNATServerGlobalPort and h3cNATServerInsideIP were provided correctly, its value is changed 'active'.
1.3.6.1.4.1.2011.10.2.18.2.3.1.12RowStatusread-createcurrent
h3cNATTimeOutTable
OBJECT-TYPE
NAT Time out Table. When a connection is established, if there are not any actives in this connection between the time, it will be disconnected.
1.3.6.1.4.1.2011.10.2.18.2.4not-accessiblecurrent
h3cNATTimeOutEntry
OBJECT-TYPE
The entry of NAT Time out Table.
1.3.6.1.4.1.2011.10.2.18.2.4.1not-accessiblecurrent
h3cNATTimeOutProtocol
OBJECT-TYPE
The type of protocol.
1.3.6.1.4.1.2011.10.2.18.2.4.1.1INTEGER {tcp(1), udp(2), icmp(3), pptp(4), dns(5), tcpFin(6), tcpSyn(7), ftpCtrl(8), ftpData(9)}not-accessiblecurrent
h3cNATTimeOutTimeValue
OBJECT-TYPE
The time of time out.
1.3.6.1.4.1.2011.10.2.18.2.4.1.2INTEGER (10..86400)read-writecurrent
h3cNATBLEnableTable
OBJECT-TYPE
NAT blacklist function Enable Table. In this table, administrator can decide whether to start the function of blacklist in the NAT board. When the function of blacklist can't be set for a NAT board, the number of NAT board is 256.
1.3.6.1.4.1.2011.10.2.18.2.5not-accessiblecurrent
h3cNATBLEnableEntry
OBJECT-TYPE
The entry of NAT blacklist Enable Table.
1.3.6.1.4.1.2011.10.2.18.2.5.1not-accessiblecurrent
h3cNATBLEnableSlotNo
OBJECT-TYPE
The number of NAT board. When the function of blacklist can't be set for a NAT board, the value is 255.
1.3.6.1.4.1.2011.10.2.18.2.5.1.1Integer32 (1..14 | 255)not-accessiblecurrent
h3cNATBLEnable
OBJECT-TYPE
Start or stop of function of balcklist.
1.3.6.1.4.1.2011.10.2.18.2.5.1.2INTEGER {enable(1), disable(2)}read-writecurrent
h3cNATBLIPConnectLimitParaTable
OBJECT-TYPE
The table of connection control of special IP address. In this table, administrator can decide to adopt which manner to control the connection which IP address is the special IP address.
1.3.6.1.4.1.2011.10.2.18.2.6not-accessiblecurrent
h3cNATBLIPConnectLimitParaEntry
OBJECT-TYPE
The entry of the table of connection control of special IP address.
1.3.6.1.4.1.2011.10.2.18.2.6.1not-accessiblecurrent
h3cNATBLIPConnectLimitParaIP
OBJECT-TYPE
The special IP address. The IP is private IP address.
1.3.6.1.4.1.2011.10.2.18.2.6.1.1IpAddressnot-accessiblecurrent
h3cNATBLIPConnectHighValue
OBJECT-TYPE
The maximal connection amount. It must be more than the minimal connection amount.
1.3.6.1.4.1.2011.10.2.18.2.6.1.2INTEGER (20..20000)read-createcurrent
h3cNATBLIPConnectLowValue
OBJECT-TYPE
The minimal connection amount. It must be less than the maximal connection amount.
1.3.6.1.4.1.2011.10.2.18.2.6.1.3INTEGER (20..20000)read-createcurrent
h3cNATBLIPUseSpecialConnectRate
OBJECT-TYPE
Whether to use the special connection rate control.
1.3.6.1.4.1.2011.10.2.18.2.6.1.4INTEGER {true(1), false(2)}read-createcurrent
h3cNATBLIPConnectLimitRowStatus
OBJECT-TYPE
Only support 'destroy' and 'createAndGo'. If h3cNATBLIPConnectHighValue, h3cNATBLIPConnectLowValue and h3cNATBLIPUseSpecialConnectRate were provided correctly, its value is changed 'active'.
1.3.6.1.4.1.2011.10.2.18.2.6.1.5RowStatusread-createcurrent
h3cNATBLManagerTable
OBJECT-TYPE
The management table of blacklist. The table doesn't support 'getnext' operation.
1.3.6.1.4.1.2011.10.2.18.2.7not-accessiblecurrent
h3cNATBLManagerEntry
OBJECT-TYPE
The entry of management table of blacklist.
1.3.6.1.4.1.2011.10.2.18.2.7.1not-accessiblecurrent
h3cNATBLIpAdress
OBJECT-TYPE
The IP address of entry of blacklist.
1.3.6.1.4.1.2011.10.2.18.2.7.1.1IpAddressnot-accessiblecurrent
h3cNATBLSlotNo
OBJECT-TYPE
The number of NAT board.
1.3.6.1.4.1.2011.10.2.18.2.7.1.2INTEGER (1..14)not-accessiblecurrent
h3cNATBLConSum
OBJECT-TYPE
The connection amount.
1.3.6.1.4.1.2011.10.2.18.2.7.1.3Integer32read-onlycurrent
h3cNATBLConSpd
OBJECT-TYPE
The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.
1.3.6.1.4.1.2011.10.2.18.2.7.1.4INTEGER {red(1), yellow(2), green(3)}read-onlycurrent
h3cNATStatTable
OBJECT-TYPE
The statistics information table of NAT module.
1.3.6.1.4.1.2011.10.2.18.2.8not-accessiblecurrent
h3cNATStatEntry
OBJECT-TYPE
The entry of statistics information table of NAT module.
1.3.6.1.4.1.2011.10.2.18.2.8.1not-accessiblecurrent
h3cNATStatNATBoardNo
OBJECT-TYPE
The number of NAT board. In router, the value is 255 because no NAT board in it.
1.3.6.1.4.1.2011.10.2.18.2.8.1.1Integer32 (1..14 | 255)not-accessiblecurrent
h3cNATStatActiveTblCount
OBJECT-TYPE
Active PAT session count In software.
1.3.6.1.4.1.2011.10.2.18.2.8.1.2Counter32read-onlycurrent
h3cNATStatActiveTblCountInNP
OBJECT-TYPE
Active PAT session count In NP.
1.3.6.1.4.1.2011.10.2.18.2.8.1.3Counter32read-onlycurrent
h3cNATStatActiveNatTblCount
OBJECT-TYPE
Active NO-PAT session count.
1.3.6.1.4.1.2011.10.2.18.2.8.1.4Counter32read-onlycurrent
h3cNATStatActiveSvrTblCount
OBJECT-TYPE
Active SERVER session count.
1.3.6.1.4.1.2011.10.2.18.2.8.1.5Counter32read-onlycurrent
h3cNATStatActivePoolTblCount
OBJECT-TYPE
Active address pool session count.
1.3.6.1.4.1.2011.10.2.18.2.8.1.6Counter32read-onlycurrent
h3cNATStatNumOfUsedPort
OBJECT-TYPE
The number of used port in NP.
1.3.6.1.4.1.2011.10.2.18.2.8.1.7Counter32read-onlycurrent
h3cNATStatNumOfGoodPkt
OBJECT-TYPE
The number of good packet in NP.
1.3.6.1.4.1.2011.10.2.18.2.8.1.8Counter32read-onlycurrent
h3cNATStatNumOfBadPkt
OBJECT-TYPE
The number of bad packet in NP.
1.3.6.1.4.1.2011.10.2.18.2.8.1.9Counter32read-onlycurrent
h3cNATStaticSessionCount
OBJECT-TYPE
Active STATIC session count.
1.3.6.1.4.1.2011.10.2.18.2.8.1.10Integer32read-onlycurrent
h3cNATFragmentSessionCount
OBJECT-TYPE
Active fragment packet session count.
1.3.6.1.4.1.2011.10.2.18.2.8.1.11Integer32read-onlycurrent
h3cNATSequenceSessionCount
OBJECT-TYPE
Active session table count hash by private IP.
1.3.6.1.4.1.2011.10.2.18.2.8.1.12Integer32read-onlycurrent
h3cNATLogCount
OBJECT-TYPE
Buffered Nat LOG table count.
1.3.6.1.4.1.2011.10.2.18.2.8.1.13Integer32read-onlycurrent
h3cNATSessionTable
OBJECT-TYPE
The nat session information table. There is the address translation information in the table. The sketch map of connection is pc1(private Net)------------------>NAT Device ------------------>Server(public Net) InsideIP, InsidePort---->translating to GlobalIP, GlobalPort------>PeerIP, PeerPort.
1.3.6.1.4.1.2011.10.2.18.2.9not-accessiblecurrent
h3cNATSessionEntry
OBJECT-TYPE
The entry of session information table.
1.3.6.1.4.1.2011.10.2.18.2.9.1not-accessiblecurrent
h3cNATSessionHashNumber
OBJECT-TYPE
The row number of the hash table.
1.3.6.1.4.1.2011.10.2.18.2.9.1.1Integer32 (1..300000)not-accessiblecurrent
h3cNATSessionProtocol
OBJECT-TYPE
The protocol type of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.2INTEGER (1..255)not-accessiblecurrent
h3cNATSessionGlobalIP
OBJECT-TYPE
The global IP of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.3IpAddressread-onlycurrent
h3cNATSessionGlobalPort
OBJECT-TYPE
The global port of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.4Integer32 (0..65535)read-onlycurrent
h3cNATSessionInsideIP
OBJECT-TYPE
The Inside IP of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.5IpAddressnot-accessiblecurrent
h3cNATSessionInsidePort
OBJECT-TYPE
The Inside port of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.6Integer32 (0..65535)not-accessiblecurrent
h3cNATSessionPeerIP
OBJECT-TYPE
The peer IP of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.7IpAddressnot-accessiblecurrent
h3cNATSessionPeerPort
OBJECT-TYPE
The peer port of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.8Integer32 (0..65535)not-accessiblecurrent
h3cNATSessionVpnIndex
OBJECT-TYPE
The VPN index of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.9Integer32 (0..255)not-accessiblecurrent
h3cNATSessionTTL
OBJECT-TYPE
The TTL of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.10Integer32read-onlycurrent
h3cNATSessionStatus
OBJECT-TYPE
The status of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.11Integer32read-onlycurrent
h3cNATSessionLeftTime
OBJECT-TYPE
The Left time of session.
1.3.6.1.4.1.2011.10.2.18.2.9.1.12TimeTicksread-onlycurrent
h3cNATStaticConfTable
OBJECT-TYPE
Static Nat configuration table.
1.3.6.1.4.1.2011.10.2.18.2.10not-accessiblecurrent
h3cNATStaticConfEntry
OBJECT-TYPE
Configure static Nat.
1.3.6.1.4.1.2011.10.2.18.2.10.1not-accessiblecurrent
h3cNATStaticInsideIp
OBJECT-TYPE
Inside ip address.
1.3.6.1.4.1.2011.10.2.18.2.10.1.1IpAddressnot-accessiblecurrent
h3cNATStaticGlobalIp
OBJECT-TYPE
Global Ip address.
1.3.6.1.4.1.2011.10.2.18.2.10.1.2IpAddressread-createcurrent
h3cNATStaticRowStatus
OBJECT-TYPE
Only support 'destroy' and 'createAndGo'. If h3cNATStaticInsideIp and h3cNATStaticGlobalIp were provided correctly, its value is changed 'active'.
1.3.6.1.4.1.2011.10.2.18.2.10.1.3RowStatusread-createcurrent
h3cNATStaticEnableTable
OBJECT-TYPE
Active the static Nat on interface.
1.3.6.1.4.1.2011.10.2.18.2.11not-accessiblecurrent
h3cNATStaticEnableEntry
OBJECT-TYPE
Active the static Nat on interface.
1.3.6.1.4.1.2011.10.2.18.2.11.1not-accessiblecurrent
h3cNATStaticEnable
OBJECT-TYPE
Enable/disable the static Nat on the interface(h3cNatStaticEnableIfIndex). disable (0) enable (1)
1.3.6.1.4.1.2011.10.2.18.2.11.1.2INTEGER {disable(0), enable(1)}read-writecurrent
h3cNATDnsMapTable
OBJECT-TYPE
This table is used to set mapping of DNS.
1.3.6.1.4.1.2011.10.2.18.2.12not-accessiblecurrent
h3cNATDnsMapEntry
OBJECT-TYPE
The entry of h3cNATDnsMapTable.
1.3.6.1.4.1.2011.10.2.18.2.12.1not-accessiblecurrent
h3cNATDnsMapDomainName
OBJECT-TYPE
Domain name.
1.3.6.1.4.1.2011.10.2.18.2.12.1.1DisplayStringnot-accessiblecurrent
h3cNATDnsMapGlobalIp
OBJECT-TYPE
Global IP address.
1.3.6.1.4.1.2011.10.2.18.2.12.1.2IpAddressread-createcurrent
h3cNATDnsMapGlobalPort
OBJECT-TYPE
Global port number.
1.3.6.1.4.1.2011.10.2.18.2.12.1.3Integer32 (1..65535)read-createcurrent
h3cNATDnsMapProtocolType
OBJECT-TYPE
TCP Transmission Control Protocol. UDP User Datagram Protocol.
1.3.6.1.4.1.2011.10.2.18.2.12.1.4INTEGER {any(0), typeTCP(1), typeUDP(2)}read-createcurrent
h3cNATDnsMapLastUseTime
OBJECT-TYPE
Its value is the time that the device uses from startup to last use 'Dns Map'record. If the value is 0,the device never use this record.
1.3.6.1.4.1.2011.10.2.18.2.12.1.5TimeTicksread-createcurrent
h3cNATDnsMapRowStatus
OBJECT-TYPE
Only support 'destroy' and 'createAndGo'. If h3cNATDnsMapDomainName, h3cNATDnsMapGlobalIp and h3cNATDnsMapGlobalPortor h3cNATDnsMapDomainName, h3cNATDnsMapGlobalIp, h3cNATDnsMapGlobalPort and h3cNATDnsMapProtocolType were provided correctly, its value is changed 'active'.
1.3.6.1.4.1.2011.10.2.18.2.12.1.6RowStatusread-createcurrent