H3C-MAC-INFORMATION-MIB
- Registered at
- 1.3.6.1.4.1.2011.10.2.87
- Last updated
- 2007-12-28 19:12
- Organization
- Hangzhou H3C Technologies Co., Ltd.
- Revisions
- 2007-12-28 19:12
- Namespace
- huawei
- Source file
H3C-MAC-INFORMATION-MIB- Digest
sha256:22b8ab54ba105dd71eaf31978f860630570addf1c3b6ee4f3e57821cfc288386
Description
This MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC information in the monitored device is knowable in remote monitoring device.
Contact
Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085
Imports
| From | Symbols |
|---|---|
| HUAWEI-3COM-OID-MIB | h3cCommon |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
H3C-MAC-INFORMATION-MIB HUAWEI-3COM-OID-MIB IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| H3cMACInfoWorkMode TEXTUAL-CONVENTION The working mode of the MAC Information feature. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| h3cMACInformationObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.87.1 | |||
| h3cMACInformationMibGlobal OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.87.1.1 | |||
| h3cMACInformationEnabled OBJECT-TYPE The value is a global setting. The feature will not work until the value is set to enabled(1). If the value is set to disabled(2), the feature will stop working even there are interfaces that have been enabled the feature. | 1.3.6.1.4.1.2011.10.2.87.1.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| h3cMACInformationcSendInterval OBJECT-TYPE The maximum interval that the device generate syslogs or traps. The unit is second. | 1.3.6.1.4.1.2011.10.2.87.1.1.2 | Unsigned32 (1..20000) | read-write | current |
| h3cMACInformationLearntMACNum OBJECT-TYPE The number of MAC addresses that learnt by the device since the h3cMACInformationEnabled is set to enabled(1) and h3cMACLearntEnable is set to enabled(1) at least on one interface. If the h3cMACInformationEnabled is set to disabled(2), the object will always return 0. | 1.3.6.1.4.1.2011.10.2.87.1.1.3 | Counter32 | read-only | current |
| h3cMACInformationRemovedMACNum OBJECT-TYPE The number of MAC addresses that removed by the device since the h3cMACInformationEnabled is set to enabled(1) and h3cMACRemovedEnable is set to enabled(1) at least on one interface. If the h3cMACInformationEnabled is set to disabled(2), the object will always return 0. | 1.3.6.1.4.1.2011.10.2.87.1.1.4 | Counter32 | read-only | current |
| h3cMACInformationTrapSendNum OBJECT-TYPE The number of traps that have been generated. This object is valid only when the h3cMACInfomationWorkMode is set to trap(1). If the h3cMACInfomationWorkMode is set to syslog(2), the object will always return 0. | 1.3.6.1.4.1.2011.10.2.87.1.1.5 | Counter32 | read-only | current |
| h3cMACInformationSyslogSendNum OBJECT-TYPE The number of syslogs that have been generated. This object is valid only when the h3cMACInfomationWorkMode is set to syslog(2). If the h3cMACInfomationWorkMode is set to trap(1), the object will always return 0. | 1.3.6.1.4.1.2011.10.2.87.1.1.6 | Counter32 | read-only | current |
| h3cMACInformationCacheLen OBJECT-TYPE The maximum queue lenth used to cache the changed MAC addresses information in the monitored device. If the value is set to 0, syslog or trap will generate as soon as there is a MAC address learnt or removed. | 1.3.6.1.4.1.2011.10.2.87.1.1.7 | Unsigned32 (0..1000) | read-write | current |
| h3cMACInfomationWorkMode OBJECT-TYPE The working mode of MAC Information feature. If the object is set to trap(1), the device will use trap mode to notify the MAC address information and all properties of trap interrelated is valid. If the object is set to syslog(2), the device will use syslog mode to notify the MAC address information and all properties of trap interrelated is invalid. | 1.3.6.1.4.1.2011.10.2.87.1.1.8 | H3cMACInfoWorkMode | read-write | current |
| h3cMACInformationMIBTableTroop OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.87.1.2 | |||
| h3cMACInfomationIfTable OBJECT-TYPE The table is used to enable or disable the MAC Information feature on interfaces. | 1.3.6.1.4.1.2011.10.2.87.1.2.1 | not-accessible | current | |
| h3cMACInfomationIfEntry OBJECT-TYPE The entry of h3cMACInfomationIfTable. | 1.3.6.1.4.1.2011.10.2.87.1.2.1.1 | not-accessible | current | |
| h3cMACLearntEnable OBJECT-TYPE If the object is set to enabled(1) on interface, the device will cache the MAC address information that learnt on the interface. | 1.3.6.1.4.1.2011.10.2.87.1.2.1.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| h3cMACRemovedEnable OBJECT-TYPE If the object is set to enable(1) on interface, the device will cache the MAC address information that removed on the interface. | 1.3.6.1.4.1.2011.10.2.87.1.2.1.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| h3cMACInformationMibTrap OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.87.1.3 | |||
| h3cMACInformationTraps OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.87.1.3.0 | |||
| h3cMACInformationTrapObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.87.1.3.2 | |||
| h3cMACInfoTrapIndex OBJECT-TYPE The sequence number of trap information. When it reaches the maximum value, it should be set to 1. | 1.3.6.1.4.1.2011.10.2.87.1.3.2.1 | Unsigned32 (1..4294967295) | accessible-for-notify | current |
| h3cMACInfoTrapCount OBJECT-TYPE The cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell. | 1.3.6.1.4.1.2011.10.2.87.1.3.2.2 | Unsigned32 | accessible-for-notify | current |
| h3cMACInfoTrapMsg OBJECT-TYPE This object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '<cell1><cell2>...'. Each cell consists of 12 octets in the format of '<operationType><VLAN><MAC><MACtype><ifIndex>'. <operationType> is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. <VLAN> is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. <MAC> is the MAC address and has size of 6 octets. <MACtype> is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - WAPI <ifIndex> is the index of the interface where the MAC address is learnt or removed and has size of 2 octets. | 1.3.6.1.4.1.2011.10.2.87.1.3.2.3 | OCTET STRING (SIZE(1..254)) | accessible-for-notify | current |
| h3cMACInformationMibTrapExt OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.87.1.4 | |||
| h3cMACInformationTrapsExt OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.87.1.4.0 | |||
| h3cMACInformationTrapObjectsExt OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.87.1.4.2 | |||
| h3cMACInfoTrapVerExt OBJECT-TYPE The version of trap information. | 1.3.6.1.4.1.2011.10.2.87.1.4.2.1 | Unsigned32 | accessible-for-notify | current |
| h3cMACInfoTrapIndexExt OBJECT-TYPE The sequence number of trap information. When it reaches the maximum value, it should be set to 1. | 1.3.6.1.4.1.2011.10.2.87.1.4.2.2 | Unsigned32 (1..4294967295) | accessible-for-notify | current |
| h3cMACInfoTrapCountExt OBJECT-TYPE The cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell. | 1.3.6.1.4.1.2011.10.2.87.1.4.2.3 | Unsigned32 | accessible-for-notify | current |
| h3cMACInfoTrapMsgExt OBJECT-TYPE This object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '<cell1><cell2>...'. Each cell consists of 14 octets in the format of '<operationType><VLAN><MAC><MACtype><ifIndex>'. <operationType> is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. <VLAN> is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. <MAC> is the MAC address and has size of 6 octets. <MACtype> is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - WAPI <ifIndex> is the index of the interface where the MAC address is learnt or removed and has size of 4 octets. | 1.3.6.1.4.1.2011.10.2.87.1.4.2.4 | OCTET STRING (SIZE(1..254)) | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| h3cMACInformationChangedTrap NOTIFICATION-TYPE When the cached number of MAC address information is reached the value specified by h3cMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by h3cMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when h3cMACInfomationWorkMode is set to trap(1). When the h3cMACInfomationWorkMode is set to syslog(2), No trap will be generated even h3cMACInformationEnabled is set to enabled(1) and the feature is enabled on interface. | 1.3.6.1.4.1.2011.10.2.87.1.3.0.1 | current |
| h3cMACInformationChangedTrapExt NOTIFICATION-TYPE When the cached number of MAC address information is reached the value specified by h3cMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by h3cMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when h3cMACInfomationWorkMode is set to trap(1). When the h3cMACInfomationWorkMode is set to syslog(2), No trap will be generated even h3cMACInformationEnabled is set to enabled(1) and the feature is enabled on interface. | 1.3.6.1.4.1.2011.10.2.87.1.4.0.1 | current |