MIBs Depot

H3C-EPON-MIB

Registered at
1.3.6.1.4.1.2011.10.2.42.1
Last updated
2007-05-22 10:08
Organization
Hangzhou H3C Technologies Co., Ltd.
Namespace
huawei
Source file
H3C-EPON-MIB
Digest
sha256:0ca8ad5a155cc5058c908e6944fa22df9a78f15173c4e00909911512133205f6

Description

The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..

Contact

Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085

Imports

FromSymbols
HUAWEI-3COM-OID-MIBh3cEpon
HUAWEI-LSW-DEV-ADM-MIBhwLswFrameIndex, hwLswSlotIndex
IF-MIBifDescr, ifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

H3C-EPON-MIB
HUAWEI-3COM-OID-MIB
HUAWEI-LSW-DEV-ADM-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
h3cEponSysMan
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.1
h3cEponAutoAuthorize
OBJECT-TYPE
This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized.
1.3.6.1.4.1.2011.10.2.42.1.1.1TruthValueread-writecurrent
h3cEponMonitorCycle
OBJECT-TYPE
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.
1.3.6.1.4.1.2011.10.2.42.1.1.2Integer32read-writecurrent
h3cEponMsgTimeOut
OBJECT-TYPE
Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
1.3.6.1.4.1.2011.10.2.42.1.1.3Integer32read-writecurrent
h3cEponMsgLoseNum
OBJECT-TYPE
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
1.3.6.1.4.1.2011.10.2.42.1.1.4Integer32read-writecurrent
h3cEponSysHasEPONBoard
OBJECT-TYPE
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
1.3.6.1.4.1.2011.10.2.42.1.1.5TruthValueread-onlycurrent
h3cEponMonitorCycleEnable
OBJECT-TYPE
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
1.3.6.1.4.1.2011.10.2.42.1.1.6TruthValueread-writecurrent
h3cEponOltSoftwareErrAlmEnable
OBJECT-TYPE
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.1.7TruthValueread-writecurrent
h3cEponPortLoopBackAlmEnable
OBJECT-TYPE
LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.1.8TruthValueread-writecurrent
h3cEponMonitorCycleMinVal
OBJECT-TYPE
The lower limit of cycle which be confined to the h3cEponMonitorCycle.
1.3.6.1.4.1.2011.10.2.42.1.1.9Integer32read-onlycurrent
h3cEponMonitorCycleMaxVal
OBJECT-TYPE
The upper limit of cycle which be confined to the h3cEponMonitorCycle.
1.3.6.1.4.1.2011.10.2.42.1.1.10Integer32read-onlycurrent
h3cEponMsgTimeOutMinVal
OBJECT-TYPE
The lower limit of timeout which be confined to the h3cEponMsgTimeOut.
1.3.6.1.4.1.2011.10.2.42.1.1.11Integer32read-onlycurrent
h3cEponMsgTimeOutMaxVal
OBJECT-TYPE
The upper limit of timeout which be confined to the h3cEponMsgTimeOut.
1.3.6.1.4.1.2011.10.2.42.1.1.12Integer32read-onlycurrent
h3cEponMsgLoseNumMinVal
OBJECT-TYPE
The lower limit of time which be confined to the h3cEponMsgLoseNum.
1.3.6.1.4.1.2011.10.2.42.1.1.13Integer32read-onlycurrent
h3cEponMsgLoseNumMaxVal
OBJECT-TYPE
The upper limit of time which be confined to the h3cEponMsgLoseNum.
1.3.6.1.4.1.2011.10.2.42.1.1.14Integer32read-onlycurrent
h3cEponSysScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.1.15
h3cEponSysManTable
OBJECT-TYPE
This table defines system related parameters.
1.3.6.1.4.1.2011.10.2.42.1.1.16not-accessiblecurrent
h3cEponSysManEntry
OBJECT-TYPE
The entry of the table h3cEponSysManTable.
1.3.6.1.4.1.2011.10.2.42.1.1.16.1not-accessiblecurrent
h3cEponSlotIndex
OBJECT-TYPE
Slot Index, the index of h3cEponSysManTable.
1.3.6.1.4.1.2011.10.2.42.1.1.16.1.1Integer32not-accessiblecurrent
h3cEponModeSwitch
OBJECT-TYPE
cmode - epon standard mode. hmode - private mode.
1.3.6.1.4.1.2011.10.2.42.1.1.16.1.2INTEGER {cmode(1), hmode(2)}read-writecurrent
h3cEponAutomaticMode
OBJECT-TYPE
Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode.
1.3.6.1.4.1.2011.10.2.42.1.1.16.1.3INTEGER {enable(1), disable(2)}read-writecurrent
h3cEponOamDiscoveryTimeout
OBJECT-TYPE
Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.
1.3.6.1.4.1.2011.10.2.42.1.1.16.1.4Integer32read-writecurrent
h3cEponEncryptionNoReplyTimeOut
OBJECT-TYPE
Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.
1.3.6.1.4.1.2011.10.2.42.1.1.16.1.5Integer32read-writecurrent
h3cEponEncryptionUpdateTime
OBJECT-TYPE
Encryption key update timer for all ONUs on slot, indicated by h3cEponSlotIndex, ranging from 1 to 255, measured in seconds.
1.3.6.1.4.1.2011.10.2.42.1.1.16.1.6Integer32read-writecurrent
h3cEponAutoBindStatus
OBJECT-TYPE
enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.
1.3.6.1.4.1.2011.10.2.42.1.1.16.1.7INTEGER {enable(1), disable(2)}read-writecurrent
h3cEponAutoUpdateTable
OBJECT-TYPE
EPON auto update ONU application configuration.
1.3.6.1.4.1.2011.10.2.42.1.1.17not-accessiblecurrent
h3cEponAutoUpdateEntry
OBJECT-TYPE
The entry of the table h3cEponAutoUpdateTable.
1.3.6.1.4.1.2011.10.2.42.1.1.17.1not-accessiblecurrent
h3cEponAutoUpdateFileName
OBJECT-TYPE
The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.
1.3.6.1.4.1.2011.10.2.42.1.1.17.1.1DisplayString (SIZE(0..255))read-writecurrent
h3cEponAutoUpdateSchedStatus
OBJECT-TYPE
The status of schedule update configuration. The h3cEponAutoUpdateFileName must be set before enable h3cEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.
1.3.6.1.4.1.2011.10.2.42.1.1.17.1.2INTEGER {enable(1), disable(2)}read-writecurrent
h3cEponAutoUpdateSchedTime
OBJECT-TYPE
The schedule update timing configuration is related to the h3cEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if h3cEponAutoUpdateSchedStatus is enabled.
1.3.6.1.4.1.2011.10.2.42.1.1.17.1.3OCTET STRING (SIZE(0..255))read-writecurrent
h3cEponAutoUpdateSchedType
OBJECT-TYPE
The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.
1.3.6.1.4.1.2011.10.2.42.1.1.17.1.4INTEGER {daily(1), weekly(2), comingdate(3)}read-writecurrent
h3cEponAutoUpdateRealTimeStatus
OBJECT-TYPE
The status of real time update configuration. The h3cEponAutoUpdateFileName must be set before enable h3cEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.
1.3.6.1.4.1.2011.10.2.42.1.1.17.1.5INTEGER {enable(1), disable(2)}read-writecurrent
h3cEponOuiIndexNextTable
OBJECT-TYPE
Next OUI index table.
1.3.6.1.4.1.2011.10.2.42.1.1.18not-accessiblecurrent
h3cEponOuiIndexNextEntry
OBJECT-TYPE
The entry of the table h3cEponOuiIndexNextTable.
1.3.6.1.4.1.2011.10.2.42.1.1.18.1not-accessiblecurrent
h3cEponOuiIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for h3cEponOuiIndex when creating rows in the h3cEponOuiTable.
1.3.6.1.4.1.2011.10.2.42.1.1.18.1.1Integer32read-onlycurrent
h3cEponOuiTable
OBJECT-TYPE
List of OUI and OAM supported by OLT.
1.3.6.1.4.1.2011.10.2.42.1.1.19not-accessiblecurrent
h3cEponOuiEntry
OBJECT-TYPE
The entry of the table h3cEponOuiTable.
1.3.6.1.4.1.2011.10.2.42.1.1.19.1not-accessiblecurrent
h3cEponOuiIndex
OBJECT-TYPE
The index of this table.
1.3.6.1.4.1.2011.10.2.42.1.1.19.1.1Integer32not-accessiblecurrent
h3cEponOuiValue
OBJECT-TYPE
OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.
1.3.6.1.4.1.2011.10.2.42.1.1.19.1.2OCTET STRING (SIZE(0..512))read-createcurrent
h3cEponOamVersion
OBJECT-TYPE
Version of OAM protocol defined by the organization denoted by OUI.
1.3.6.1.4.1.2011.10.2.42.1.1.19.1.3OCTET STRING (SIZE(0..255))read-createcurrent
h3cEponOuiRowStatus
OBJECT-TYPE
The status of this table entry. Only active, createAndGo and the destory are supported.
1.3.6.1.4.1.2011.10.2.42.1.1.19.1.4RowStatusread-createcurrent
h3cEponMulticastControlTable
OBJECT-TYPE
Multicast control global configuration.
1.3.6.1.4.1.2011.10.2.42.1.1.20not-accessiblecurrent
h3cEponMulticastControlEntry
OBJECT-TYPE
The entry of the table h3cEponMulticastControlTable.
1.3.6.1.4.1.2011.10.2.42.1.1.20.1not-accessiblecurrent
h3cEponMulticastVlanId
OBJECT-TYPE
The index of this table.
1.3.6.1.4.1.2011.10.2.42.1.1.20.1.1Integer32not-accessiblecurrent
h3cEponMulticastAddressList
OBJECT-TYPE
The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.
1.3.6.1.4.1.2011.10.2.42.1.1.20.1.2OCTET STRING (SIZE(0..255))read-createcurrent
h3cEponMulticastStatus
OBJECT-TYPE
The status of this table entry. Only active, createAndGo and the destory are supported.
1.3.6.1.4.1.2011.10.2.42.1.1.20.1.3RowStatusread-createcurrent
h3cEponFileName
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.2
h3cEponDbaUpdateFileName
OBJECT-TYPE
The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path.
1.3.6.1.4.1.2011.10.2.42.1.2.1OCTET STRING (SIZE(0..64))read-writecurrent
h3cEponOnuUpdateFileName
OBJECT-TYPE
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
1.3.6.1.4.1.2011.10.2.42.1.2.2OCTET STRING (SIZE(0..64))read-writecurrent
h3cEponOltMan
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.3
h3cOltSysManTable
OBJECT-TYPE
This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result
1.3.6.1.4.1.2011.10.2.42.1.3.1not-accessiblecurrent
h3cOltSysManEntry
OBJECT-TYPE
The entry of the table h3cOltSysManTable.
1.3.6.1.4.1.2011.10.2.42.1.3.1.1not-accessiblecurrent
h3cOltLaserOnTime
OBJECT-TYPE
The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).
1.3.6.1.4.1.2011.10.2.42.1.3.1.1.1Integer32read-writecurrent
h3cOltLaserOffTime
OBJECT-TYPE
The laser off time of the ONUs during the discovery process, measured in TQ.
1.3.6.1.4.1.2011.10.2.42.1.3.1.1.2Integer32read-writecurrent
h3cOltMultiCopyBrdCast
OBJECT-TYPE
true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature.
1.3.6.1.4.1.2011.10.2.42.1.3.1.1.3TruthValueread-writecurrent
h3cOltEnableDiscardPacket
OBJECT-TYPE
Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.
1.3.6.1.4.1.2011.10.2.42.1.3.1.1.4TruthValueread-writecurrent
h3cOltSelfTest
OBJECT-TYPE
selftest(1): Test OLT to check whether it's OK.
1.3.6.1.4.1.2011.10.2.42.1.3.1.1.5INTEGER {selftest(1)}read-writecurrent
h3cOltSelfTestResult
OBJECT-TYPE
The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.
1.3.6.1.4.1.2011.10.2.42.1.3.1.1.6INTEGER {other(1), ok(2), fail(3)}read-onlycurrent
h3cOltMaxRtt
OBJECT-TYPE
Set the max Round Trip Time of this OLT.
1.3.6.1.4.1.2011.10.2.42.1.3.1.1.7Unsigned32read-writecurrent
h3cOltInfoTable
OBJECT-TYPE
Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (h3cOltFirmMajorVersion, h3cOltFirmMinorVersion, h3cOltHardMajorVersion, h3cOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (h3cOltAgcLockTime, h3cOltAgcCdrTime) (3)The operation(activation) status of an OLT. (h3cOltMacAddress, h3cOltWorkMode)
1.3.6.1.4.1.2011.10.2.42.1.3.2not-accessiblecurrent
h3cOltInfoEntry
OBJECT-TYPE
The entry of the table h3cOltInfoTable.
1.3.6.1.4.1.2011.10.2.42.1.3.2.1not-accessiblecurrent
h3cOltFirmMajorVersion
OBJECT-TYPE
OLT firmware major version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.2011.10.2.42.1.3.2.1.1OCTET STRINGread-onlycurrent
h3cOltFirmMinorVersion
OBJECT-TYPE
OLT firmware minor version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.2011.10.2.42.1.3.2.1.2OCTET STRINGread-onlycurrent
h3cOltHardMajorVersion
OBJECT-TYPE
OLT hardware major version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.2011.10.2.42.1.3.2.1.3OCTET STRINGread-onlycurrent
h3cOltHardMinorVersion
OBJECT-TYPE
OLT hardware minor version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.2011.10.2.42.1.3.2.1.4OCTET STRINGread-onlycurrent
h3cOltAgcLockTime
OBJECT-TYPE
PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.
1.3.6.1.4.1.2011.10.2.42.1.3.2.1.5Integer32read-onlycurrent
h3cOltAgcCdrTime
OBJECT-TYPE
PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value
1.3.6.1.4.1.2011.10.2.42.1.3.2.1.6Integer32read-onlycurrent
h3cOltMacAddress
OBJECT-TYPE
OLT MAC address.
1.3.6.1.4.1.2011.10.2.42.1.3.2.1.7MacAddressread-onlycurrent
h3cOltWorkMode
OBJECT-TYPE
The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.
1.3.6.1.4.1.2011.10.2.42.1.3.2.1.8INTEGER {other(1), open(2), reset(3), closed(4)}read-onlycurrent
h3cOltOpticalPowerTx
OBJECT-TYPE
The optical power transmitted by this OLT. It measured in 0.01 dBm unit.
1.3.6.1.4.1.2011.10.2.42.1.3.2.1.9Integer32read-onlycurrent
h3cOltOpticalPowerRx
OBJECT-TYPE
The burst optical power received by this OLT. It measured in 0.01 dBm unit.
1.3.6.1.4.1.2011.10.2.42.1.3.2.1.10Integer32read-onlycurrent
h3cOltDbaManTable
OBJECT-TYPE
This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.
1.3.6.1.4.1.2011.10.2.42.1.3.3not-accessiblecurrent
h3cOltDbaManEntry
OBJECT-TYPE
The entry of the table h3cOltDbaManTable.
1.3.6.1.4.1.2011.10.2.42.1.3.3.1not-accessiblecurrent
h3cOltDbaEnabledType
OBJECT-TYPE
Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source.
1.3.6.1.4.1.2011.10.2.42.1.3.3.1.1INTEGER {internal(1), external(2)}read-writecurrent
h3cOltDbaDiscoveryLength
OBJECT-TYPE
Discovery length in TQ units.
1.3.6.1.4.1.2011.10.2.42.1.3.3.1.2Integer32read-writecurrent
h3cOltDbaDiscovryFrequency
OBJECT-TYPE
How often should the OLT send discovery frames to the ONUs, measured in grant cycles.
1.3.6.1.4.1.2011.10.2.42.1.3.3.1.3Integer32read-writecurrent
h3cOltDbaCycleLength
OBJECT-TYPE
The grant cycle length in TQ units.
1.3.6.1.4.1.2011.10.2.42.1.3.3.1.4Integer32read-writecurrent
h3cOltDbaVersion
OBJECT-TYPE
DBA version of the OLT.
1.3.6.1.4.1.2011.10.2.42.1.3.3.1.5OCTET STRINGread-onlycurrent
h3cOltDbaUpdate
OBJECT-TYPE
Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module h3cEponDbaUpdateFileName.
1.3.6.1.4.1.2011.10.2.42.1.3.3.1.6INTEGER {update(1)}read-writecurrent
h3cOltDbaUpdateResult
OBJECT-TYPE
The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set.
1.3.6.1.4.1.2011.10.2.42.1.3.3.1.7INTEGER {other(1), ok(2), fail(3), fileNotExist(4), notSetFilename(5)}read-onlycurrent
h3cOltPortAlarmThresholdTable
OBJECT-TYPE
The table defines the alarm threshold of OLT.
1.3.6.1.4.1.2011.10.2.42.1.3.4not-accessiblecurrent
h3cOltPortAlarmThresholdEntry
OBJECT-TYPE
The entry of the table h3cOltPortAlarmThresholdTable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1not-accessiblecurrent
h3cOltPortAlarmBerEnabled
OBJECT-TYPE
Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.1TruthValueread-writecurrent
h3cOltPortAlarmBerDirect
OBJECT-TYPE
Traffic direction to monitor for BER alarm.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.2INTEGER {berUplink(1), berDownlink(2), berAll(3)}read-writecurrent
h3cOltPortAlarmBerThreshold
OBJECT-TYPE
BER threshold exceed which the alarm is raised.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.3Integer32read-writecurrent
h3cOltPortAlarmFerEnabled
OBJECT-TYPE
Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.4TruthValueread-writecurrent
h3cOltPortAlarmFerDirect
OBJECT-TYPE
Traffic direction to monitor for FER alarm.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.5INTEGER {ferUplink(1), ferDownlink(2), ferAll(3)}read-writecurrent
h3cOltPortAlarmFerThreshold
OBJECT-TYPE
Frame error rate exceed threshold then the alarm is raised.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.6Integer32read-writecurrent
h3cOltPortAlarmLlidMismatchEnabled
OBJECT-TYPE
Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.7TruthValueread-writecurrent
h3cOltPortAlarmLlidMismatchThreshold
OBJECT-TYPE
The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.8Integer32read-writecurrent
h3cOltPortAlarmRemoteStableEnabled
OBJECT-TYPE
Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.9TruthValueread-writecurrent
h3cOltPortAlarmLocalStableEnabled
OBJECT-TYPE
Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.10TruthValueread-writecurrent
h3cOltPortAlarmRegistrationEnabled
OBJECT-TYPE
Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.11TruthValueread-writecurrent
h3cOltPortAlarmOamDisconnectionEnabled
OBJECT-TYPE
Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.12TruthValueread-writecurrent
h3cOltPortAlarmEncryptionKeyEnabled
OBJECT-TYPE
Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.13TruthValueread-writecurrent
h3cOltPortAlarmVendorSpecificEnabled
OBJECT-TYPE
Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.14TruthValueread-writecurrent
h3cOltPortAlarmRegExcessEnabled
OBJECT-TYPE
Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.15TruthValueread-writecurrent
h3cOltPortAlarmDFEEnabled
OBJECT-TYPE
Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.
1.3.6.1.4.1.2011.10.2.42.1.3.4.1.16TruthValueread-writecurrent
h3cOltLaserOnTimeMinVal
OBJECT-TYPE
The lower limit of time which is confined to h3cOltLaserOnTime.
1.3.6.1.4.1.2011.10.2.42.1.3.5Integer32read-onlycurrent
h3cOltLaserOnTimeMaxVal
OBJECT-TYPE
The upper limit of time which is confined to h3cOltLaserOnTime.
1.3.6.1.4.1.2011.10.2.42.1.3.6Integer32read-onlycurrent
h3cOltLaserOffTimeMinVal
OBJECT-TYPE
The lower limit of time which is confined to h3cOltLaserOffTime.
1.3.6.1.4.1.2011.10.2.42.1.3.7Integer32read-onlycurrent
h3cOltLaserOffTimeMaxVal
OBJECT-TYPE
The upper limit of time which is confined to h3cOltLaserOffTime.
1.3.6.1.4.1.2011.10.2.42.1.3.8Integer32read-onlycurrent
h3cOltDbaDiscoveryLengthMinVal
OBJECT-TYPE
The lower limit of the discovery length which is confined to h3cOltDbaDiscoveryLength.
1.3.6.1.4.1.2011.10.2.42.1.3.9Integer32read-onlycurrent
h3cOltDbaDiscoveryLengthMaxVal
OBJECT-TYPE
The upper limit of the discovery length which is confined to h3cOltDbaDiscoveryLength.
1.3.6.1.4.1.2011.10.2.42.1.3.10Integer32read-onlycurrent
h3cOltDbaDiscovryFrequencyMinVal
OBJECT-TYPE
The lower limit of the discovery length which is confined to h3cOltDbaDiscovryFrequency.
1.3.6.1.4.1.2011.10.2.42.1.3.11Integer32read-onlycurrent
h3cOltDbaDiscovryFrequencyMaxVal
OBJECT-TYPE
The upper limit of the discovery length which is confined to h3cOltDbaDiscovryFrequency.
1.3.6.1.4.1.2011.10.2.42.1.3.12Integer32read-onlycurrent
h3cOltDbaCycleLengthMinVal
OBJECT-TYPE
The lower limit of the frames which is confined to h3cOltDbaCycleLength.
1.3.6.1.4.1.2011.10.2.42.1.3.13Integer32read-onlycurrent
h3cOltDbaCycleLengthMaxVal
OBJECT-TYPE
The upper limit of the frames which is confined to h3cOltDbaCycleLength.
1.3.6.1.4.1.2011.10.2.42.1.3.14Integer32read-onlycurrent
h3cOltPortAlarmLlidMisMinVal
OBJECT-TYPE
The lower limit of the frames which is confined to h3cOltPortAlarmLlidMismatchThreshold.
1.3.6.1.4.1.2011.10.2.42.1.3.15Integer32read-onlycurrent
h3cOltPortAlarmLlidMisMaxVal
OBJECT-TYPE
The upper limit of the frames which is confined to h3cOltPortAlarmLlidMismatchThreshold.
1.3.6.1.4.1.2011.10.2.42.1.3.16Integer32read-onlycurrent
h3cOltPortAlarmBerMinVal
OBJECT-TYPE
The lower limit of threshold which is confined to h3cOltPortAlarmBerThreshold.
1.3.6.1.4.1.2011.10.2.42.1.3.17Integer32read-onlycurrent
h3cOltPortAlarmBerMaxVal
OBJECT-TYPE
The upper limit of threshold which is confined to h3cOltPortAlarmBerThreshold.
1.3.6.1.4.1.2011.10.2.42.1.3.18Integer32read-onlycurrent
h3cOltPortAlarmFerMinVal
OBJECT-TYPE
The lower limit of threshold which is confined to h3cOltPortAlarmFerThreshold.
1.3.6.1.4.1.2011.10.2.42.1.3.19Integer32read-onlycurrent
h3cOltPortAlarmFerMaxVal
OBJECT-TYPE
The upper limit of threshold which is confined to h3cOltPortAlarmFerThreshold.
1.3.6.1.4.1.2011.10.2.42.1.3.20Integer32read-onlycurrent
h3cOnuSilentTable
OBJECT-TYPE
This table is used for getting silent ONU information of OLT.
1.3.6.1.4.1.2011.10.2.42.1.3.21not-accessiblecurrent
h3cOnuSilentEntry
OBJECT-TYPE
The entry of the table h3cOnuSilentTable.
1.3.6.1.4.1.2011.10.2.42.1.3.21.1not-accessiblecurrent
h3cOnuSilentMacAddr
OBJECT-TYPE
The MAC address of silent ONUs in OLT.
1.3.6.1.4.1.2011.10.2.42.1.3.21.1.1MacAddressnot-accessiblecurrent
h3cOnuSilentTime
OBJECT-TYPE
The aging time of a silent ONU.
1.3.6.1.4.1.2011.10.2.42.1.3.21.1.2Integer32read-onlycurrent
h3cOltUsingOnuTable
OBJECT-TYPE
The table containing configurations to manage ONU interface(s) based on OLT interface.
1.3.6.1.4.1.2011.10.2.42.1.3.22not-accessiblecurrent
h3cOltUsingOnuEntry
OBJECT-TYPE
The entry of the table h3cOltUsingOnuTable.
1.3.6.1.4.1.2011.10.2.42.1.3.22.1not-accessiblecurrent
h3cOltUsingOnuNum
OBJECT-TYPE
The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.
1.3.6.1.4.1.2011.10.2.42.1.3.22.1.1Integer32 (1..64)not-accessiblecurrent
h3cOltUsingOnuIfIndex
OBJECT-TYPE
The ifIndex of the ONU interface.
1.3.6.1.4.1.2011.10.2.42.1.3.22.1.2Integer32read-onlycurrent
h3cOltUsingOnuRowStatus
OBJECT-TYPE
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
1.3.6.1.4.1.2011.10.2.42.1.3.22.1.3RowStatusread-createcurrent
h3cEponOnuMan
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.5
h3cOnuSysManTable
OBJECT-TYPE
This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator.
1.3.6.1.4.1.2011.10.2.42.1.5.1not-accessiblecurrent
h3cOnuSysManEntry
OBJECT-TYPE
The entry of the table h3cOnuSysManTable.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1not-accessiblecurrent
h3cOnuEncryptMan
OBJECT-TYPE
Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.1INTEGER {off(1), downlink(2), updownlink(3)}read-writecurrent
h3cOnuReAuthorize
OBJECT-TYPE
Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.2INTEGER {reAuthorize(1)}read-writecurrent
h3cOnuMulticastFilterStatus
OBJECT-TYPE
true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.3TruthValueread-writecurrent
h3cOnuDbaReportQueueSetNumber
OBJECT-TYPE
The number of queue sets reported in MPCP report frames.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.4Integer32read-writecurrent
h3cOnuRemoteFecStatus
OBJECT-TYPE
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.5INTEGER {enable(1), disable(2)}read-writecurrent
h3cOnuPortBerStatus
OBJECT-TYPE
enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.6INTEGER {enable(1), disable(2)}read-writecurrent
h3cOnuReset
OBJECT-TYPE
Reboot ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.7INTEGER {reset(1)}read-writecurrent
h3cOnuMulticastControlMode
OBJECT-TYPE
igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.8INTEGER {igmpsnooping(1), multicastcontrol(2)}read-writecurrent
h3cOnuAccessVlan
OBJECT-TYPE
The VLAN ID assigned to untagged frames received on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.9Integer32read-writecurrent
h3cOnuEncryptKey
OBJECT-TYPE
The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.10DisplayString (SIZE(0..255))read-writecurrent
h3cOnuUniUpDownTrapStatus
OBJECT-TYPE
true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.11TruthValueread-writecurrent
h3cOnuFecStatus
OBJECT-TYPE
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.12INTEGER {enable(1), disable(2)}read-writecurrent
h3cOnuMcastCtrlHostAgingTime
OBJECT-TYPE
The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.13Integer32read-writecurrent
h3cOnuMulticastFastLeaveEnable
OBJECT-TYPE
true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.14TruthValueread-writecurrent
h3cOnuPortIsolateEnable
OBJECT-TYPE
true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.1.1.15TruthValueread-writecurrent
h3cOnuLinkTestTable
OBJECT-TYPE
LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames.
1.3.6.1.4.1.2011.10.2.42.1.5.2not-accessiblecurrent
h3cOnuLinkTestEntry
OBJECT-TYPE
The entry of h3cOnuLinkTestEntry.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1not-accessiblecurrent
h3cOnuLinkTestFrameNum
OBJECT-TYPE
Exact number of measurement frames.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.1Integer32read-writecurrent
h3cOnuLinkTestFrameSize
OBJECT-TYPE
Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 .
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.2Integer32 (60..1514)read-writecurrent
h3cOnuLinkTestDelay
OBJECT-TYPE
true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.3TruthValueread-writecurrent
h3cOnuLinkTestVlanTag
OBJECT-TYPE
true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.4TruthValueread-writecurrent
h3cOnuLinkTestVlanPriority
OBJECT-TYPE
VLAN priority: 0-7.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.5Integer32 (0..7)read-writecurrent
h3cOnuLinkTestVlanTagID
OBJECT-TYPE
VLAN ID: 1-4094.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.6Integer32 (1..4094)read-writecurrent
h3cOnuLinkTestResultSentFrameNum
OBJECT-TYPE
The total number of frames sent during the link test process.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.7Integer32read-onlycurrent
h3cOnuLinkTestResultRetFrameNum
OBJECT-TYPE
The total number of frames return back during the link test process.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.8Integer32read-onlycurrent
h3cOnuLinkTestResultRetErrFrameNum
OBJECT-TYPE
The total number of error frames return back during the link test process.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.9Integer32read-onlycurrent
h3cOnuLinkTestResultMinDelay
OBJECT-TYPE
The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay' is set to be true.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.10Integer32read-onlycurrent
h3cOnuLinkTestResultMeanDelay
OBJECT-TYPE
The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay' is set to be true.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.11Integer32read-onlycurrent
h3cOnuLinkTestResultMaxDelay
OBJECT-TYPE
The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay' is set to be true.
1.3.6.1.4.1.2011.10.2.42.1.5.2.1.12Integer32read-onlycurrent
h3cOnuBandWidthTable
OBJECT-TYPE
Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection.
1.3.6.1.4.1.2011.10.2.42.1.5.3not-accessiblecurrent
h3cOnuBandWidthEntry
OBJECT-TYPE
The entry of table h3cOnuBandWidthTable.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1not-accessiblecurrent
h3cOnuDownStreamBandWidthPolicy
OBJECT-TYPE
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1.1TruthValueread-writecurrent
h3cOnuDownStreamMaxBandWidth
OBJECT-TYPE
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1.2Integer32 (0..1000000)read-writecurrent
h3cOnuDownStreamMaxBurstSize
OBJECT-TYPE
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1.3Integer32 (0..8388480)read-writecurrent
h3cOnuDownStreamHighPriorityFirst
OBJECT-TYPE
true:Enable high priority frames preference. false:Disable high priority frames preference.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1.4TruthValueread-writecurrent
h3cOnuDownStreamShortFrameFirst
OBJECT-TYPE
true:Enable short frames preference. false:Disable short frames preference.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1.5TruthValueread-writecurrent
h3cOnuP2PBandWidthPolicy
OBJECT-TYPE
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1.6TruthValueread-writecurrent
h3cOnuP2PMaxBandWidth
OBJECT-TYPE
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1.7Integer32 (0..1000000)read-writecurrent
h3cOnuP2PMaxBurstSize
OBJECT-TYPE
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1.8Integer32 (0..8388480)read-writecurrent
h3cOnuP2PHighPriorityFirst
OBJECT-TYPE
true:Enable high priority frames preference. false:Disable high priority frames preference.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1.9TruthValueread-writecurrent
h3cOnuP2PShortFrameFirst
OBJECT-TYPE
true:Enable short frames preference. false:Disable short frames preference.
1.3.6.1.4.1.2011.10.2.42.1.5.3.1.10TruthValueread-writecurrent
h3cOnuSlaManTable
OBJECT-TYPE
Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm.
1.3.6.1.4.1.2011.10.2.42.1.5.4not-accessiblecurrent
h3cOnuSlaManEntry
OBJECT-TYPE
The entry of table h3cOnuSlaManTable.
1.3.6.1.4.1.2011.10.2.42.1.5.4.1not-accessiblecurrent
h3cOnuSlaMaxBandWidth
OBJECT-TYPE
Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.
1.3.6.1.4.1.2011.10.2.42.1.5.4.1.1Integer32read-writecurrent
h3cOnuSlaMinBandWidth
OBJECT-TYPE
Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.
1.3.6.1.4.1.2011.10.2.42.1.5.4.1.2Integer32read-writecurrent
h3cOnuSlaBandWidthStepVal
OBJECT-TYPE
Granularity of bandwidth - measured in Kbit/s. The value of h3cOnuSlaMaxBandWidth and h3cOnuSlaMinBandWidth should be the multiple of the value of this object.
1.3.6.1.4.1.2011.10.2.42.1.5.4.1.3Integer32read-onlycurrent
h3cOnuSlaDelay
OBJECT-TYPE
low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.
1.3.6.1.4.1.2011.10.2.42.1.5.4.1.4INTEGER {low(1), high(2)}read-writecurrent
h3cOnuSlaFixedBandWidth
OBJECT-TYPE
Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal.
1.3.6.1.4.1.2011.10.2.42.1.5.4.1.5Integer32read-writecurrent
h3cOnuSlaPriorityClass
OBJECT-TYPE
Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.
1.3.6.1.4.1.2011.10.2.42.1.5.4.1.6Integer32read-writecurrent
h3cOnuSlaFixedPacketSize
OBJECT-TYPE
Fixed packet size - measured in byte. The value of this object should be valid when h3cOnuSlaFixedBandWidth is configured.
1.3.6.1.4.1.2011.10.2.42.1.5.4.1.7Integer32read-writecurrent
h3cOnuInfoTable
OBJECT-TYPE
Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (h3cOnuHardMajorVersion, h3cOnuHardMinorVersion, h3cOnuUniMacType) (2)Several physical capabilities of the ONU. (h3cOnuLaserOnTime, h3cOnuLaserOffTime, h3cOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (h3cOnuWorkMode)
1.3.6.1.4.1.2011.10.2.42.1.5.5not-accessiblecurrent
h3cOnuInfoEntry
OBJECT-TYPE
The entry of the h3cOnuInfoTable.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1not-accessiblecurrent
h3cOnuHardMajorVersion
OBJECT-TYPE
ONU hardware major version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.1OCTET STRINGread-onlycurrent
h3cOnuHardMinorVersion
OBJECT-TYPE
ONU hardware minor version. If the object length is zero, it means the version is unknown.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.2OCTET STRINGread-onlycurrent
h3cOnuSoftwareVersion
OBJECT-TYPE
ONU software version.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.3OCTET STRINGread-onlycurrent
h3cOnuUniMacType
OBJECT-TYPE
ONU User Network Interface(UNI) port MAC type.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.4INTEGER {other(1), mii(2), gmii(3), tbi(4)}read-onlycurrent
h3cOnuLaserOnTime
OBJECT-TYPE
The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means h3cOnuLaserOnTime is unknown.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.5Integer32read-onlycurrent
h3cOnuLaserOffTime
OBJECT-TYPE
The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means h3cOnuLaserOffTime is unknown.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.6Integer32read-onlycurrent
h3cOnuGrantFifoDep
OBJECT-TYPE
Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.7Integer32 (1..255 | 2147483647)read-onlycurrent
h3cOnuWorkMode
OBJECT-TYPE
The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.8INTEGER {other(1), on(2), pending(3), off(4)}read-onlycurrent
h3cOnuPCBVersion
OBJECT-TYPE
ONU PCB version.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.9OCTET STRINGread-onlycurrent
h3cOnuRtt
OBJECT-TYPE
The signal round-trip-time(RTT) received.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.10Unsigned32read-onlycurrent
h3cOnuEEPROMVersion
OBJECT-TYPE
ONU EEPROM version.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.11OCTET STRINGread-onlycurrent
h3cOnuRegType
OBJECT-TYPE
ONU registered type.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.12OCTET STRINGread-onlycurrent
h3cOnuHostType
OBJECT-TYPE
ONU host type.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.13OCTET STRINGread-onlycurrent
h3cOnuDistance
OBJECT-TYPE
The distance between OLT and ONU, measured in meter.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.14Integer32read-onlycurrent
h3cOnuLlid
OBJECT-TYPE
The link layer identifier, which uniquely identifies the ONU of a specific OLT.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.15Integer32read-onlycurrent
h3cOnuVendorId
OBJECT-TYPE
ONU vendor ID.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.16OCTET STRINGread-onlycurrent
h3cOnuFirmwareVersion
OBJECT-TYPE
ONU firmware version.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.17OCTET STRINGread-onlycurrent
h3cOnuOpticalPowerReceivedByOlt
OBJECT-TYPE
The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.
1.3.6.1.4.1.2011.10.2.42.1.5.5.1.18Integer32read-onlycurrent
h3cOnuMacAddrInfoTable
OBJECT-TYPE
This table used for getting MAC address information of ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.6not-accessiblecurrent
h3cOnuMacAddrInfoEntry
OBJECT-TYPE
The entry of the h3cEponOnuMacAddrInfoTable.
1.3.6.1.4.1.2011.10.2.42.1.5.6.1not-accessiblecurrent
h3cOnuMacIndex
OBJECT-TYPE
The index of ONUs in one OLT.
1.3.6.1.4.1.2011.10.2.42.1.5.6.1.1Integer32not-accessiblecurrent
h3cOnuMacAddrFlag
OBJECT-TYPE
The flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT and registered on another OLT.
1.3.6.1.4.1.2011.10.2.42.1.5.6.1.2INTEGER {bound(1), registered(2), run(3), regIncorrect(4)}read-onlycurrent
h3cOnuMacAddress
OBJECT-TYPE
The MAC address of ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.6.1.3MacAddressread-onlycurrent
h3cOnuBindMacAddrTable
OBJECT-TYPE
This table implements the following functions for ONUs: Bind MAC of ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.7not-accessiblecurrent
h3cOnuBindMacAddrEntry
OBJECT-TYPE
The entry of the table h3cOnuBindMacAddrTable.
1.3.6.1.4.1.2011.10.2.42.1.5.7.1not-accessiblecurrent
h3cOnuBindMacAddress
OBJECT-TYPE
Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values.
1.3.6.1.4.1.2011.10.2.42.1.5.7.1.1MacAddressread-writecurrent
h3cOnuBindType
OBJECT-TYPE
Set the binding type with the ONU which is confined to the index of h3cEponOnuTypeDescr.
1.3.6.1.4.1.2011.10.2.42.1.5.7.1.2Integer32read-writecurrent
h3cOnuFirmwareUpdateTable
OBJECT-TYPE
This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware.
1.3.6.1.4.1.2011.10.2.42.1.5.8not-accessiblecurrent
h3cOnuFirmwareUpdateEntry
OBJECT-TYPE
The entry of the table h3cOnuFirmwareUpdateTable.
1.3.6.1.4.1.2011.10.2.42.1.5.8.1not-accessiblecurrent
h3cOnuUpdate
OBJECT-TYPE
update(1): Update the ONU firmware. Config the MIB object module h3cEponOnuUpdateFileName with the filename of ONU firmware first.
1.3.6.1.4.1.2011.10.2.42.1.5.8.1.1INTEGER {update(1)}read-writecurrent
h3cOnuUpdateResult
OBJECT-TYPE
The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown.
1.3.6.1.4.1.2011.10.2.42.1.5.8.1.2INTEGER {updating(1), ok(2), fail(3), fileNotExist(4), notSetFilename(5), fileNotMatchONU(6), timeout(7), otherError(8)}read-onlycurrent
h3cOnuUpdateFileName
OBJECT-TYPE
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
1.3.6.1.4.1.2011.10.2.42.1.5.8.1.3OCTET STRING (SIZE(0..255))read-writecurrent
h3cOnuLinkTestFrameNumMinVal
OBJECT-TYPE
The lower limit of measurement frames which is confined to h3cOnuLinkTestFrameNum.
1.3.6.1.4.1.2011.10.2.42.1.5.9Integer32read-onlycurrent
h3cOnuLinkTestFrameNumMaxVal
OBJECT-TYPE
The upper limit of measurement frames which is confined to h3cOnuLinkTestFrameNum.
1.3.6.1.4.1.2011.10.2.42.1.5.10Integer32read-onlycurrent
h3cOnuSlaMaxBandWidthMinVal
OBJECT-TYPE
The lower limit of maximum-bandwidth which is confined to h3cOnuSlaMaxBandWidth.
1.3.6.1.4.1.2011.10.2.42.1.5.11Integer32read-onlycurrent
h3cOnuSlaMaxBandWidthMaxVal
OBJECT-TYPE
The upper limit of maximum-bandwidth which is confined to h3cOnuSlaMaxBandWidth.
1.3.6.1.4.1.2011.10.2.42.1.5.12Integer32read-onlycurrent
h3cOnuSlaMinBandWidthMinVal
OBJECT-TYPE
The lower limit of minimum-bandwidth which is confined to h3cOnuSlaMinBandWidth.
1.3.6.1.4.1.2011.10.2.42.1.5.13Integer32read-onlycurrent
h3cOnuSlaMinBandWidthMaxVal
OBJECT-TYPE
The upper limit of minimum-bandwidth which is confined to h3cOnuSlaMinBandWidth.
1.3.6.1.4.1.2011.10.2.42.1.5.14Integer32read-onlycurrent
h3cEponOnuTypeManTable
OBJECT-TYPE
This table is used for getting ONU bind type in current version.
1.3.6.1.4.1.2011.10.2.42.1.5.15not-accessiblecurrent
h3cEponOnuTypeManEntry
OBJECT-TYPE
The entry of the h3cEponOnuTypeManTable.
1.3.6.1.4.1.2011.10.2.42.1.5.15.1not-accessiblecurrent
h3cEponOnuTypeIndex
OBJECT-TYPE
The ONU type index.
1.3.6.1.4.1.2011.10.2.42.1.5.15.1.1Integer32not-accessiblecurrent
h3cEponOnuTypeDescr
OBJECT-TYPE
The ONU type description which can be used to bind ONU in current version. the value of h3cOnuBindType can be configured by the index of h3cEponOnuTypeDescr.
1.3.6.1.4.1.2011.10.2.42.1.5.15.1.2OCTET STRINGread-onlycurrent
h3cOnuPacketManTable
OBJECT-TYPE
This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode.
1.3.6.1.4.1.2011.10.2.42.1.5.16not-accessiblecurrent
h3cOnuPacketManEntry
OBJECT-TYPE
The entry of the h3cOnuPacketManTable.
1.3.6.1.4.1.2011.10.2.42.1.5.16.1not-accessiblecurrent
h3cOnuPriorityTrust
OBJECT-TYPE
The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.
1.3.6.1.4.1.2011.10.2.42.1.5.16.1.1INTEGER {dscp(1), ipprecedence(2), cos(3)}read-writecurrent
h3cOnuQueueScheduler
OBJECT-TYPE
The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.
1.3.6.1.4.1.2011.10.2.42.1.5.16.1.2INTEGER {spq(1), wfq(2)}read-writecurrent
h3cOnuProtocolTable
OBJECT-TYPE
This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping.
1.3.6.1.4.1.2011.10.2.42.1.5.17not-accessiblecurrent
h3cOnuProtocolEntry
OBJECT-TYPE
The entry of h3cOnuProtocolTable.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1not-accessiblecurrent
h3cOnuStpStatus
OBJECT-TYPE
true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1.1TruthValueread-writecurrent
h3cOnuIgmpSnoopingStatus
OBJECT-TYPE
true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1.2TruthValueread-writecurrent
h3cOnuDhcpsnoopingOption82
OBJECT-TYPE
true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1.3TruthValueread-writecurrent
h3cOnuDhcpsnooping
OBJECT-TYPE
true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1.4TruthValueread-writecurrent
h3cOnuPppoe
OBJECT-TYPE
true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1.5TruthValueread-writecurrent
h3cOnuIgmpSnoopingHostAgingT
OBJECT-TYPE
Set the host aging time of IGMP on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1.6Integer32read-writecurrent
h3cOnuIgmpSnoopingMaxRespT
OBJECT-TYPE
Set the max response time of IGMP on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1.7Integer32read-writecurrent
h3cOnuIgmpSnoopingRouterAgingT
OBJECT-TYPE
Set the router aging time of IGMP on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1.8Integer32read-writecurrent
h3cOnuIgmpSnoopingAggReportS
OBJECT-TYPE
true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1.9TruthValueread-writecurrent
h3cOnuIgmpSnoopingAggLeaveS
OBJECT-TYPE
true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.17.1.10TruthValueread-writecurrent
h3cOnuDot1xTable
OBJECT-TYPE
This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable.
1.3.6.1.4.1.2011.10.2.42.1.5.18not-accessiblecurrent
h3cOnuDot1xEntry
OBJECT-TYPE
The entry of the h3cOnuDot1xTable.
1.3.6.1.4.1.2011.10.2.42.1.5.18.1not-accessiblecurrent
h3cOnuDot1xAccount
OBJECT-TYPE
ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with h3cOnuDot1xPassword.
1.3.6.1.4.1.2011.10.2.42.1.5.18.1.1OCTET STRINGread-writecurrent
h3cOnuDot1xPassword
OBJECT-TYPE
ONU 802.1X password. The object should be set together with h3cOnuDot1xAccount.
1.3.6.1.4.1.2011.10.2.42.1.5.18.1.2OCTET STRINGread-writecurrent
h3cOnuPriorityQueueTable
OBJECT-TYPE
This table contains specific information of priority queue.
1.3.6.1.4.1.2011.10.2.42.1.5.19not-accessiblecurrent
h3cOnuPriorityQueueEntry
OBJECT-TYPE
The entry of h3cOnuPriorityQueueTable.
1.3.6.1.4.1.2011.10.2.42.1.5.19.1not-accessiblecurrent
h3cOnuQueueDirection
OBJECT-TYPE
The direction of priority queue.
1.3.6.1.4.1.2011.10.2.42.1.5.19.1.1INTEGER {inbound(1), outbound(2)}not-accessiblecurrent
h3cOnuQueueId
OBJECT-TYPE
The queue ID of priority queue.
1.3.6.1.4.1.2011.10.2.42.1.5.19.1.2Integer32 (0..7)not-accessiblecurrent
h3cOnuQueueSize
OBJECT-TYPE
The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of h3cOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100.
1.3.6.1.4.1.2011.10.2.42.1.5.19.1.3Integer32read-writecurrent
h3cOnuCountTable
OBJECT-TYPE
This table contains statistics of ONU port.
1.3.6.1.4.1.2011.10.2.42.1.5.20not-accessiblecurrent
h3cOnuCountEntry
OBJECT-TYPE
The entry of h3cOnuCountTable.
1.3.6.1.4.1.2011.10.2.42.1.5.20.1not-accessiblecurrent
h3cOnuInCRCErrPkts
OBJECT-TYPE
The total number of frames received with bad CRC checksum.
1.3.6.1.4.1.2011.10.2.42.1.5.20.1.1Counter64read-onlycurrent
h3cOnuOutDroppedFrames
OBJECT-TYPE
The total number of frames dropped because of buffer failure.
1.3.6.1.4.1.2011.10.2.42.1.5.20.1.2Counter64read-onlycurrent
h3cEponOnuScalarGroup
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.5.21
h3cOnuPriorityQueueSizeMinVal
OBJECT-TYPE
The lower limit of queue size which is confined to h3cOnuQueueSize.
1.3.6.1.4.1.2011.10.2.42.1.5.21.1Integer32read-onlycurrent
h3cOnuPriorityQueueSizeMaxVal
OBJECT-TYPE
The upper limit of queue size which is confined to h3cOnuQueueSize.
1.3.6.1.4.1.2011.10.2.42.1.5.21.2Integer32read-onlycurrent
h3cOnuPriorityQueueBandwidthMinVal
OBJECT-TYPE
The lower limit of h3cOnuQueueMaxBandwidth.
1.3.6.1.4.1.2011.10.2.42.1.5.21.3Integer32read-onlycurrent
h3cOnuPriorityQueueBandwidthMaxVal
OBJECT-TYPE
The upper limit of h3cOnuQueueMaxBandwidth.
1.3.6.1.4.1.2011.10.2.42.1.5.21.4Integer32read-onlycurrent
h3cOnuPriorityQueueBurstsizeMinVal
OBJECT-TYPE
The lower limit of h3cOnuQueueMaxBurstsize.
1.3.6.1.4.1.2011.10.2.42.1.5.21.5Integer32read-onlycurrent
h3cOnuPriorityQueueBurstsizeMaxVal
OBJECT-TYPE
The upper limit of h3cOnuQueueMaxBurstsize.
1.3.6.1.4.1.2011.10.2.42.1.5.21.6Integer32read-onlycurrent
h3cOnuUpdateByTypeNextIndex
OBJECT-TYPE
Offer a free index of h3cOnuFirmwareUpdateByTypeTable.
1.3.6.1.4.1.2011.10.2.42.1.5.21.7Integer32read-onlycurrent
h3cOnuQueueBandwidthTable
OBJECT-TYPE
This table contains specific bandwidth information of ONU priority queue.
1.3.6.1.4.1.2011.10.2.42.1.5.22not-accessiblecurrent
h3cOnuQueueBandwidthEntry
OBJECT-TYPE
The entry of h3cOnuQueueBandwidthTable.
1.3.6.1.4.1.2011.10.2.42.1.5.22.1not-accessiblecurrent
h3cOnuQueueMaxBandwidth
OBJECT-TYPE
The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.
1.3.6.1.4.1.2011.10.2.42.1.5.22.1.1Integer32read-writecurrent
h3cOnuQueueMaxBurstsize
OBJECT-TYPE
The maximum burst size of specific ONU priority queue, measured in 64Bytes.
1.3.6.1.4.1.2011.10.2.42.1.5.22.1.2Integer32read-writecurrent
h3cOnuQueuePolicyStatus
OBJECT-TYPE
true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.
1.3.6.1.4.1.2011.10.2.42.1.5.22.1.3TruthValueread-writecurrent
h3cOnuIpAddressTable
OBJECT-TYPE
ONU IP address table.
1.3.6.1.4.1.2011.10.2.42.1.5.23not-accessiblecurrent
h3cOnuIpAddressEntry
OBJECT-TYPE
The entry of h3cOnuIpAddressTable.
1.3.6.1.4.1.2011.10.2.42.1.5.23.1not-accessiblecurrent
h3cOnuIpAddress
OBJECT-TYPE
The IP address assigned to the ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.23.1.1IpAddressread-writecurrent
h3cOnuIpAddressMask
OBJECT-TYPE
The mask of IP address denoted by h3cOnuIpAddress.
1.3.6.1.4.1.2011.10.2.42.1.5.23.1.2IpAddressread-writecurrent
h3cOnuIpAddressGateway
OBJECT-TYPE
The gateway of IP address denoted by h3cOnuIpAddress.
1.3.6.1.4.1.2011.10.2.42.1.5.23.1.3IpAddressread-writecurrent
h3cOnuDhcpallocate
OBJECT-TYPE
true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.
1.3.6.1.4.1.2011.10.2.42.1.5.23.1.4TruthValueread-writecurrent
h3cOnuManageVID
OBJECT-TYPE
The management VLAN of ONU denoted by h3cOnuManageVID.
1.3.6.1.4.1.2011.10.2.42.1.5.23.1.5Integer32read-writecurrent
h3cOnuManageVlanIntfS
OBJECT-TYPE
The management interface status of ONU denoted by h3cOnuManageVlanIntfS.
1.3.6.1.4.1.2011.10.2.42.1.5.23.1.6TruthValueread-writecurrent
h3cOnuChipSetInfoTable
OBJECT-TYPE
ONU vendor specific information of ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.24not-accessiblecurrent
h3cOnuChipSetInfoEntry
OBJECT-TYPE
The entry of h3cOnuChipSetInfoTable.
1.3.6.1.4.1.2011.10.2.42.1.5.24.1not-accessiblecurrent
h3cOnuChipSetVendorId
OBJECT-TYPE
Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.
1.3.6.1.4.1.2011.10.2.42.1.5.24.1.1OCTET STRING (SIZE(0..255))read-onlycurrent
h3cOnuChipSetModel
OBJECT-TYPE
Chip model, numbering(range from 0 to 0xFF) by the chip vendor.
1.3.6.1.4.1.2011.10.2.42.1.5.24.1.2OCTET STRING (SIZE(0..255))read-onlycurrent
h3cOnuChipSetRevision
OBJECT-TYPE
Chip revision.
1.3.6.1.4.1.2011.10.2.42.1.5.24.1.3Integer32read-onlycurrent
h3cOnuChipSetDesignDate
OBJECT-TYPE
Chip design date.
1.3.6.1.4.1.2011.10.2.42.1.5.24.1.4DateAndTimeread-onlycurrent
h3cOnuCapabilityTable
OBJECT-TYPE
Capability of ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.25not-accessiblecurrent
h3cOnuCapabilityEntry
OBJECT-TYPE
The entry of the table h3cOnuCapabilityTable.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1not-accessiblecurrent
h3cOnuServiceSupported
OBJECT-TYPE
Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.1Bits {geinterfacesupport(0), feinterfacesupport(1), voipservicesupport(2), tdmservicesupport(3)}read-onlycurrent
h3cOnuGEPortNumber
OBJECT-TYPE
The current gigabit ethernet ports number supported by the ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.2Integer32read-onlycurrent
h3cOnuFEPortNumber
OBJECT-TYPE
the current fast ethernet ports number supported by the ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.3Integer32read-onlycurrent
h3cOnuPOTSPortNumber
OBJECT-TYPE
The current POTS ports number supported by the ONU
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.4Integer32read-onlycurrent
h3cOnuE1PortsNumber
OBJECT-TYPE
The current E1 ports number supported by the ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.5Integer32read-onlycurrent
h3cOnuUpstreamQueueNumber
OBJECT-TYPE
The number of upstream queues supported by the ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.6Integer32read-onlycurrent
h3cOnuMaxUpstreamQueuePerPort
OBJECT-TYPE
The number of maximum upstream queues per port of the ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.7Integer32read-onlycurrent
h3cOnuDownstreamQueueNumber
OBJECT-TYPE
The number of downstream queues supported by the ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.8Integer32read-onlycurrent
h3cOnuMaxDownstreamQueuePerPort
OBJECT-TYPE
The number of maximum downstream queues per port of the ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.9Integer32read-onlycurrent
h3cOnuBatteryBackup
OBJECT-TYPE
true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.10TruthValueread-onlycurrent
h3cOnuIgspFastLeaveSupported
OBJECT-TYPE
true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.11TruthValueread-onlycurrent
h3cOnuMCtrlFastLeaveSupported
OBJECT-TYPE
true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.
1.3.6.1.4.1.2011.10.2.42.1.5.25.1.12TruthValueread-onlycurrent
h3cOnuDbaReportTable
OBJECT-TYPE
This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames.
1.3.6.1.4.1.2011.10.2.42.1.5.26not-accessiblecurrent
h3cOnuDbaReportEntry
OBJECT-TYPE
The entry of the table h3cOnuDbaReportTable.
1.3.6.1.4.1.2011.10.2.42.1.5.26.1not-accessiblecurrent
h3cOnuDbaReportQueueId
OBJECT-TYPE
The DBA report queue ID.
1.3.6.1.4.1.2011.10.2.42.1.5.26.1.1Integer32not-accessiblecurrent
h3cOnuDbaReportThreshold
OBJECT-TYPE
The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0
1.3.6.1.4.1.2011.10.2.42.1.5.26.1.2Integer32read-writecurrent
h3cOnuDbaReportStatus
OBJECT-TYPE
enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.
1.3.6.1.4.1.2011.10.2.42.1.5.26.1.3INTEGER {enable(1), disable(2)}read-writecurrent
h3cOnuCosToLocalPrecedenceTable
OBJECT-TYPE
Table of map of the COS to local-precedence.
1.3.6.1.4.1.2011.10.2.42.1.5.27not-accessiblecurrent
h3cOnuCosToLocalPrecedenceEntry
OBJECT-TYPE
Configuration information of map of the COS to local precedence.
1.3.6.1.4.1.2011.10.2.42.1.5.27.1not-accessiblecurrent
h3cOnuCosToLocalPrecedenceCosIndex
OBJECT-TYPE
Index of the map, obtains from packet cos value.
1.3.6.1.4.1.2011.10.2.42.1.5.27.1.1Integer32 (0..7)read-onlycurrent
h3cOnuCosToLocalPrecedenceValue
OBJECT-TYPE
Value of local precedence.
1.3.6.1.4.1.2011.10.2.42.1.5.27.1.2Integer32 (0..7)read-writecurrent
h3cEponOnuStpPortTable
OBJECT-TYPE
Table of ONU STP ports.
1.3.6.1.4.1.2011.10.2.42.1.5.28not-accessiblecurrent
h3cEponOnuStpPortEntry
OBJECT-TYPE
Configuration information of ONU STP ports.
1.3.6.1.4.1.2011.10.2.42.1.5.28.1not-accessiblecurrent
h3cEponStpPortIndex
OBJECT-TYPE
The index of the STP ports.
1.3.6.1.4.1.2011.10.2.42.1.5.28.1.1Integer32 (0..144)accessible-for-notifycurrent
h3cEponStpPortDescr
OBJECT-TYPE
The description of the STP ports.
1.3.6.1.4.1.2011.10.2.42.1.5.28.1.2OCTET STRINGaccessible-for-notifycurrent
h3cEponStpPortState
OBJECT-TYPE
The current state of the port (i.e. disabled, discarding, learning and forwarding).
1.3.6.1.4.1.2011.10.2.42.1.5.28.1.3INTEGER {disabled(1), discarding(2), learning(3), forwarding(4)}accessible-for-notifycurrent
h3cOnuPhysicalTable
OBJECT-TYPE
This table is used for getting ONU physical information.
1.3.6.1.4.1.2011.10.2.42.1.5.29not-accessiblecurrent
h3cOnuPhysicalEntry
OBJECT-TYPE
The entry of the h3cOnuPhysicalTable.
1.3.6.1.4.1.2011.10.2.42.1.5.29.1not-accessiblecurrent
h3cOnuBridgeMac
OBJECT-TYPE
The bridge MAC address of ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.29.1.1MacAddressread-onlycurrent
h3cOnuFirstPonMac
OBJECT-TYPE
The MAC address of ONU first PON port.
1.3.6.1.4.1.2011.10.2.42.1.5.29.1.2MacAddressread-onlycurrent
h3cOnuFirstPonRegState
OBJECT-TYPE
The register state of ONU first PON port.
1.3.6.1.4.1.2011.10.2.42.1.5.29.1.3INTEGER {notExist(1), absent(2), offline(3), silent(4), down(5), up(6)}read-onlycurrent
h3cOnuSecondPonMac
OBJECT-TYPE
The MAC address of ONU second PON port.
1.3.6.1.4.1.2011.10.2.42.1.5.29.1.4MacAddressread-onlycurrent
h3cOnuSecondPonRegState
OBJECT-TYPE
The register state of ONU second PON port.
1.3.6.1.4.1.2011.10.2.42.1.5.29.1.5INTEGER {notExist(1), absent(2), offline(3), silent(4), down(5), up(6)}read-onlycurrent
h3cOnuSmlkTable
OBJECT-TYPE
This table is used for getting ONU SMLK information.
1.3.6.1.4.1.2011.10.2.42.1.5.30not-accessiblecurrent
h3cOnuSmlkEntry
OBJECT-TYPE
The entry of the h3cOnuSmlkTable.
1.3.6.1.4.1.2011.10.2.42.1.5.30.1not-accessiblecurrent
h3cOnuSmlkGroupID
OBJECT-TYPE
The SMLK group ID of ONU.
1.3.6.1.4.1.2011.10.2.42.1.5.30.1.1Integer32read-onlycurrent
h3cOnuSmlkFirstPonRole
OBJECT-TYPE
The role of ONU first PON port in a SMLK group.
1.3.6.1.4.1.2011.10.2.42.1.5.30.1.2INTEGER {master(1), slave(2), null(3)}read-onlycurrent
h3cOnuSmlkFirstPonStatus
OBJECT-TYPE
The transmitting status of ONU first PON port in a SMLK group.
1.3.6.1.4.1.2011.10.2.42.1.5.30.1.3INTEGER {active(1), standby(2), down(3), null(4)}read-onlycurrent
h3cOnuSmlkSecondPonRole
OBJECT-TYPE
The role of ONU second PON port in a SMLK group.
1.3.6.1.4.1.2011.10.2.42.1.5.30.1.4INTEGER {master(1), slave(2), null(3)}read-onlycurrent
h3cOnuSmlkSecondPonStatus
OBJECT-TYPE
The transmitting status of ONU second PON port in a SMLK group.
1.3.6.1.4.1.2011.10.2.42.1.5.30.1.5INTEGER {active(1), standby(2), down(3), null(4)}read-onlycurrent
h3cOnuRS485PropertiesTable
OBJECT-TYPE
Property table.
1.3.6.1.4.1.2011.10.2.42.1.5.31not-accessiblecurrent
h3cOnuRS485PropertiesEntry
OBJECT-TYPE
The entry of property table.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1not-accessiblecurrent
h3cOnuRS485SerialIndex
OBJECT-TYPE
The index of serial port.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.1Integer32 (1..64)not-accessiblecurrent
h3cOnuRS485BaudRate
OBJECT-TYPE
The port baud rate.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.2INTEGER {baudRate300(1), baudRate600(2), baudRate1200(3), baudRate2400(4), baudRate4800(5), baudRate9600(6), baudRate19200(7), baudRate38400(8), baudRate57600(9), baudRate115200(10)}read-writecurrent
h3cOnuRS485DataBits
OBJECT-TYPE
The port number of data bits in a character.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.3INTEGER {five(1), six(2), seven(3), eight(4)}read-writecurrent
h3cOnuRS485Parity
OBJECT-TYPE
The port sense of a character parity bit.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.4INTEGER {none(1), odd(2), even(3), mark(4), space(5)}read-writecurrent
h3cOnuRS485StopBits
OBJECT-TYPE
The port number of stop bits.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.5INTEGER {one(1), two(2), oneAndHalf(3)}read-writecurrent
h3cOnuRS485FlowControl
OBJECT-TYPE
The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.6INTEGER {none(1), hardware(2), xonOrxoff(3)}read-writecurrent
h3cOnuRS485TXOctets
OBJECT-TYPE
The number of output octets about the port. The unit is byte.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.7Integer32read-onlycurrent
h3cOnuRS485RXOctets
OBJECT-TYPE
The number of input octets about the port. The unit is byte.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.8Integer32read-onlycurrent
h3cOnuRS485TXErrOctets
OBJECT-TYPE
The number of output error octets about the port. The unit is byte.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.9Integer32read-onlycurrent
h3cOnuRS485RXErrOctets
OBJECT-TYPE
The number of input error octets about the port. The unit is byte.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.10Integer32read-onlycurrent
h3cOnuRS485ResetStatistics
OBJECT-TYPE
Reset the counters to zero, including h3cOnuRS485TXOctets, h3cOnuRS485RXOctets, h3cOnuRS485TXErrOctets and h3cOnuRS485RXErrOctets.
1.3.6.1.4.1.2011.10.2.42.1.5.31.1.11INTEGER {counting(1), clear(2)}read-writecurrent
h3cOnuRS485SessionSummaryTable
OBJECT-TYPE
Session summary table.
1.3.6.1.4.1.2011.10.2.42.1.5.32not-accessiblecurrent
h3cOnuRS485SessionSummaryEntry
OBJECT-TYPE
The entry of session summary table.
1.3.6.1.4.1.2011.10.2.42.1.5.32.1not-accessiblecurrent
h3cOnuRS485SessionMaxNum
OBJECT-TYPE
The max session number of every serial port which can be supported.
1.3.6.1.4.1.2011.10.2.42.1.5.32.1.1Integer32 (1..64)read-onlycurrent
h3cOnuRS485SessionNextIndex
OBJECT-TYPE
The next valid index used for creating a new session raw. When there is no valid index left, it will return 0.
1.3.6.1.4.1.2011.10.2.42.1.5.32.1.2Integer32 (0..64)read-onlycurrent
h3cOnuRS485SessionTable
OBJECT-TYPE
RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets.
1.3.6.1.4.1.2011.10.2.42.1.5.33not-accessiblecurrent
h3cOnuRS485SessionEntry
OBJECT-TYPE
The entry of session table.
1.3.6.1.4.1.2011.10.2.42.1.5.33.1not-accessiblecurrent
h3cOnuRS485SessionIndex
OBJECT-TYPE
Raw session index.
1.3.6.1.4.1.2011.10.2.42.1.5.33.1.1Integer32 (1..64)not-accessiblecurrent
h3cOnuRS485SessionType
OBJECT-TYPE
The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
1.3.6.1.4.1.2011.10.2.42.1.5.33.1.2INTEGER {udp(1), tcpClient(2), tcpServer(3)}read-createcurrent
h3cOnuRS485SessionAddType
OBJECT-TYPE
This object indicates the transport type of the address contained in h3cOnuRS485SessionRemoteIP object.
1.3.6.1.4.1.2011.10.2.42.1.5.33.1.3InetAddressTyperead-createcurrent
h3cOnuRS485SessionRemoteIP
OBJECT-TYPE
The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.
1.3.6.1.4.1.2011.10.2.42.1.5.33.1.4InetAddressread-createcurrent
h3cOnuRS485SessionRemotePort
OBJECT-TYPE
The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.
1.3.6.1.4.1.2011.10.2.42.1.5.33.1.5Integer32 (1024..65535)read-createcurrent
h3cOnuRS485SessionLocalPort
OBJECT-TYPE
Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.
1.3.6.1.4.1.2011.10.2.42.1.5.33.1.6Integer32 (1024..65535)read-createcurrent
h3cOnuRS485SessionRowStatus
OBJECT-TYPE
The status used for creating, modifying, and deleting instances of the columnar objects in raw session table.
1.3.6.1.4.1.2011.10.2.42.1.5.33.1.7RowStatusread-createcurrent
h3cOnuRS485SessionErrInfoTable
OBJECT-TYPE
Error information table. When failed to create a session, error information can be got from this table.
1.3.6.1.4.1.2011.10.2.42.1.5.34not-accessiblecurrent
h3cOnuRS485SessionErrInfoEntry
OBJECT-TYPE
The entry of error information table.
1.3.6.1.4.1.2011.10.2.42.1.5.34.1not-accessiblecurrent
h3cOnuRS485SessionErrInfo
OBJECT-TYPE
Error information string. When a response with 'noCreeation' for row creation in table h3cOnuRS485SessionTable, the error reason can be got from this object.
1.3.6.1.4.1.2011.10.2.42.1.5.34.1.1DisplayStringread-onlycurrent
h3cEponBatchOperationMan
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.6
h3cEponBatchOperationBySlotTable
OBJECT-TYPE
This table is used for batch operation by slot.
1.3.6.1.4.1.2011.10.2.42.1.6.1not-accessiblecurrent
h3cEponBatchOperationBySlotEntry
OBJECT-TYPE
The entry of the h3cEponBatchOperationBySlotTable.
1.3.6.1.4.1.2011.10.2.42.1.6.1.1not-accessiblecurrent
h3cEponBatchOperationBySlotIndex
OBJECT-TYPE
The EPON board index.
1.3.6.1.4.1.2011.10.2.42.1.6.1.1.1Integer32not-accessiblecurrent
h3cEponBatchOperationBySlotType
OBJECT-TYPE
The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module h3cEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module h3cEponOnuUpdateFileName with the filename of ONU firmware first.
1.3.6.1.4.1.2011.10.2.42.1.6.1.1.2INTEGER {resetUnknown(1), updateDba(9), updateONU(10)}read-writecurrent
h3cEponBatchOperationBySlot
OBJECT-TYPE
Execute batch operation.
1.3.6.1.4.1.2011.10.2.42.1.6.1.1.3INTEGER {batOpBySlot(1)}read-writecurrent
h3cEponBatchOperationBySlotResult
OBJECT-TYPE
The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype.
1.3.6.1.4.1.2011.10.2.42.1.6.1.1.4Integer32read-onlycurrent
h3cEponBatchOperationByOLTTable
OBJECT-TYPE
This table is used for batch operation by OLT.
1.3.6.1.4.1.2011.10.2.42.1.6.2not-accessiblecurrent
h3cEponBatchOperationByOLTEntry
OBJECT-TYPE
The entry of the h3cEponBatchOperationByOLTTable.
1.3.6.1.4.1.2011.10.2.42.1.6.2.1not-accessiblecurrent
h3cEponBatchOperationByOLTType
OBJECT-TYPE
The types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module h3cEponOnuUpdateFileName with the filename of ONU firmware first.
1.3.6.1.4.1.2011.10.2.42.1.6.2.1.1INTEGER {resetUnknown(1), updateONU(5)}read-writecurrent
h3cEponBatchOperationByOLT
OBJECT-TYPE
Execute batch operation.
1.3.6.1.4.1.2011.10.2.42.1.6.2.1.2INTEGER {batOpByOlt(1)}read-writecurrent
h3cEponBatchOperationByOLTResult
OBJECT-TYPE
The result of batch operation: 0xFFFF -- other, gernal error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype.
1.3.6.1.4.1.2011.10.2.42.1.6.2.1.3Integer32read-onlycurrent
h3cOnuFirmwareUpdateByTypeTable
OBJECT-TYPE
This table is used to update ONU by ONU type.
1.3.6.1.4.1.2011.10.2.42.1.6.3not-accessiblecurrent
h3cOnuFirmwareUpdateByTypeEntry
OBJECT-TYPE
The entry of the h3cOnuFirmwareUpdateByTypeTable.
1.3.6.1.4.1.2011.10.2.42.1.6.3.1not-accessiblecurrent
h3cOnuUpdateByOnuTypeIndex
OBJECT-TYPE
The type and file relationship table entry index.
1.3.6.1.4.1.2011.10.2.42.1.6.3.1.1Integer32not-accessiblecurrent
h3cOnuUpdateByTypeOnuType
OBJECT-TYPE
The type of ONUs.
1.3.6.1.4.1.2011.10.2.42.1.6.3.1.2OCTET STRING (SIZE(0..15))read-createcurrent
h3cOnuUpdateByTypeFileName
OBJECT-TYPE
The file to be updated for the type of ONUs.
1.3.6.1.4.1.2011.10.2.42.1.6.3.1.3OCTET STRING (SIZE(0..255))read-createcurrent
h3cOnuUpdateByTypeRowStatus
OBJECT-TYPE
The status of this table entry. Only createAndGo and destroy actions are supported.
1.3.6.1.4.1.2011.10.2.42.1.6.3.1.4RowStatusread-createcurrent
h3cEponErrorInfo
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.7
h3cEponSoftwareErrorCode
OBJECT-TYPE
OLT software error code.
1.3.6.1.4.1.2011.10.2.42.1.7.1Integer32accessible-for-notifycurrent
h3cOamVendorSpecificAlarmCode
OBJECT-TYPE
Alarm code of the vendor.
1.3.6.1.4.1.2011.10.2.42.1.7.2Integer32accessible-for-notifycurrent
h3cEponOnuRegErrorMacAddr
OBJECT-TYPE
The MAC of ONU registered error.
1.3.6.1.4.1.2011.10.2.42.1.7.3OCTET STRINGaccessible-for-notifycurrent
h3cOamEventLogType
OBJECT-TYPE
The type of event that generated this entry in the event log.
1.3.6.1.4.1.2011.10.2.42.1.7.4Unsigned32accessible-for-notifycurrent
h3cOamEventLogLocation
OBJECT-TYPE
Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM.
1.3.6.1.4.1.2011.10.2.42.1.7.5INTEGER {local(1), remote(2)}accessible-for-notifycurrent
h3cEponLoopbackPortIndex
OBJECT-TYPE
The index of port which generate loop back event.
1.3.6.1.4.1.2011.10.2.42.1.7.6Integer32accessible-for-notifycurrent
h3cEponLoopbackPortDescr
OBJECT-TYPE
A textual string containing information about the port generated loop back event.
1.3.6.1.4.1.2011.10.2.42.1.7.7OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
h3cOltPortAlarmLlidMisFrames
OBJECT-TYPE
the amount of mismatched frames about the LLID mismatch alarm.
1.3.6.1.4.1.2011.10.2.42.1.7.8Unsigned32accessible-for-notifycurrent
h3cOltPortAlarmBer
OBJECT-TYPE
error bit rate.
1.3.6.1.4.1.2011.10.2.42.1.7.9Unsigned32accessible-for-notifycurrent
h3cOltPortAlarmFer
OBJECT-TYPE
error frames rate.
1.3.6.1.4.1.2011.10.2.42.1.7.10Unsigned32accessible-for-notifycurrent
h3cEponOnuRegSilentMac
OBJECT-TYPE
The MAC of silent ONU.
1.3.6.1.4.1.2011.10.2.42.1.7.11OCTET STRINGaccessible-for-notifycurrent
h3cEponOperationResult
OBJECT-TYPE
The result of EPON operation.
1.3.6.1.4.1.2011.10.2.42.1.7.12OCTET STRING (SIZE(0..255))accessible-for-notifycurrent
h3cEponOnuLaserState
OBJECT-TYPE
The state of ONU laser.
1.3.6.1.4.1.2011.10.2.42.1.7.13INTEGER {normal(1), laserAlwaysOn(2), signalDegradation(3), endOfLife(4)}accessible-for-notifycurrent
h3cEponTrap
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.8
h3cEponTrapPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.8.0
h3cEponStat
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.42.1.9
h3cEponStatTable
OBJECT-TYPE
This table contains line code error statistics of epon port.
1.3.6.1.4.1.2011.10.2.42.1.9.1not-accessiblecurrent
h3cEponStatEntry
OBJECT-TYPE
The entry of h3cEponStatTable.
1.3.6.1.4.1.2011.10.2.42.1.9.1.1not-accessiblecurrent
h3cEponStatFER
OBJECT-TYPE
The frame error rate of epon port, measured in 1e-9 unit.
1.3.6.1.4.1.2011.10.2.42.1.9.1.1.1Counter64read-onlycurrent
h3cEponStatBER
OBJECT-TYPE
The bit error rate of epon port, measured in 1e-9 unit.
1.3.6.1.4.1.2011.10.2.42.1.9.1.1.2Counter64read-onlycurrent

Notifications

NameOIDStatus
h3cEponPortAlarmBerTrap
NOTIFICATION-TYPE
A h3cEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected.
1.3.6.1.4.1.2011.10.2.42.1.8.0.1current
h3cEponPortAlarmFerTrap
NOTIFICATION-TYPE
A h3cEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected.
1.3.6.1.4.1.2011.10.2.42.1.8.0.2current
h3cEponErrorLLIDFrameTrap
NOTIFICATION-TYPE
A h3cEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected.
1.3.6.1.4.1.2011.10.2.42.1.8.0.3current
h3cEponLoopBackEnableTrap
NOTIFICATION-TYPE
A h3cEponLoopBackEnableTrap notification is sent when the loop back command is committed.
1.3.6.1.4.1.2011.10.2.42.1.8.0.4current
h3cEponOnuRegistrationErrTrap
NOTIFICATION-TYPE
A h3cEponOnuRegistrationErrTrap notification is sent when a ONU register failed.
1.3.6.1.4.1.2011.10.2.42.1.8.0.5current
h3cEponOamDisconnectionTrap
NOTIFICATION-TYPE
A h3cEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
1.3.6.1.4.1.2011.10.2.42.1.8.0.6current
h3cEponEncryptionKeyErrTrap
NOTIFICATION-TYPE
A h3cEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad.
1.3.6.1.4.1.2011.10.2.42.1.8.0.7current
h3cEponRemoteStableTrap
NOTIFICATION-TYPE
A h3cEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information.
1.3.6.1.4.1.2011.10.2.42.1.8.0.8current
h3cEponLocalStableTrap
NOTIFICATION-TYPE
A h3cEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information.
1.3.6.1.4.1.2011.10.2.42.1.8.0.9current
h3cEponOamVendorSpecificTrap
NOTIFICATION-TYPE
A h3cEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised.
1.3.6.1.4.1.2011.10.2.42.1.8.0.10current
h3cEponSoftwareErrTrap
NOTIFICATION-TYPE
A h3cEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs.
1.3.6.1.4.1.2011.10.2.42.1.8.0.11current
h3cEponPortAlarmBerRecoverTrap
NOTIFICATION-TYPE
A h3cEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered.
1.3.6.1.4.1.2011.10.2.42.1.8.0.12current
h3cEponPortAlarmFerRecoverTrap
NOTIFICATION-TYPE
A h3cEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd.
1.3.6.1.4.1.2011.10.2.42.1.8.0.13current
h3cEponErrorLLIDFrameRecoverTrap
NOTIFICATION-TYPE
A h3cEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd.
1.3.6.1.4.1.2011.10.2.42.1.8.0.14current
h3cEponLoopBackEnableRecoverTrap
NOTIFICATION-TYPE
A h3cEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd.
1.3.6.1.4.1.2011.10.2.42.1.8.0.15current
h3cEponOnuRegistrationErrRecoverTrap
NOTIFICATION-TYPE
A h3cEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again.
1.3.6.1.4.1.2011.10.2.42.1.8.0.16current
h3cEponOamDisconnectionRecoverTrap
NOTIFICATION-TYPE
A h3cEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
1.3.6.1.4.1.2011.10.2.42.1.8.0.17current
h3cEponEncryptionKeyErrRecoverTrap
NOTIFICATION-TYPE
A h3cEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right.
1.3.6.1.4.1.2011.10.2.42.1.8.0.18current
h3cEponRemoteStableRecoverTrap
NOTIFICATION-TYPE
A h3cEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized.
1.3.6.1.4.1.2011.10.2.42.1.8.0.19current
h3cEponLocalStableRecoverTrap
NOTIFICATION-TYPE
A h3cEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized.
1.3.6.1.4.1.2011.10.2.42.1.8.0.20current
h3cEponOamVendorSpecificRecoverTrap
NOTIFICATION-TYPE
A h3cEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered.
1.3.6.1.4.1.2011.10.2.42.1.8.0.21current
h3cEponSoftwareErrRecoverTrap
NOTIFICATION-TYPE
A h3cEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered.
1.3.6.1.4.1.2011.10.2.42.1.8.0.22current
h3cDot3OamThresholdRecoverEvent
NOTIFICATION-TYPE
A h3cDot3OamThresholdRecoverEvent notification is sent when h3cDot3OamThresholdEvent is detected and then recoverd.
1.3.6.1.4.1.2011.10.2.42.1.8.0.23current
h3cDot3OamNonThresholdRecoverEvent
NOTIFICATION-TYPE
A h3cDot3OamNonThresholdRecoverEvent notification is sent when h3cDot3OamNonThresholdEvent is detected and then recoverd.
1.3.6.1.4.1.2011.10.2.42.1.8.0.24current
h3cEponOnuRegExcessTrap
NOTIFICATION-TYPE
A h3cEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit.
1.3.6.1.4.1.2011.10.2.42.1.8.0.25current
h3cEponOnuRegExcessRecoverTrap
NOTIFICATION-TYPE
A h3cEponOnuRegExcessRecoverTrap notification is sent when h3cEponOnuRegExcessTrap is detected and then recoverd.
1.3.6.1.4.1.2011.10.2.42.1.8.0.26current
h3cEponOnuPowerOffTrap
NOTIFICATION-TYPE
A h3cEponOnuPowerOffTrap notification is sent when ONU is power off.
1.3.6.1.4.1.2011.10.2.42.1.8.0.27current
h3cEponOltSwitchoverTrap
NOTIFICATION-TYPE
A h3cEponOltSwithoverTrap notification is sent when OLT switchover is detected.
1.3.6.1.4.1.2011.10.2.42.1.8.0.28current
h3cEponOltDFETrap
NOTIFICATION-TYPE
A h3cEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT.
1.3.6.1.4.1.2011.10.2.42.1.8.0.29current
h3cEponOltDFERecoverTrap
NOTIFICATION-TYPE
A h3cEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd.
1.3.6.1.4.1.2011.10.2.42.1.8.0.30current
h3cEponOnuSilenceTrap
NOTIFICATION-TYPE
The h3cEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT.
1.3.6.1.4.1.2011.10.2.42.1.8.0.31current
h3cEponOnuSilenceRecoverTrap
NOTIFICATION-TYPE
The h3cEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout.
1.3.6.1.4.1.2011.10.2.42.1.8.0.32current
h3cEponOnuUpdateResultTrap
NOTIFICATION-TYPE
A h3cEponUpdateResultTrap notification is sent when an ONU reported its firmware update result.
1.3.6.1.4.1.2011.10.2.42.1.8.0.33current
h3cEponOnuAutoBindTrap
NOTIFICATION-TYPE
A h3cEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically.
1.3.6.1.4.1.2011.10.2.42.1.8.0.34current
h3cEponOnuPortStpStateTrap
NOTIFICATION-TYPE
A h3cEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment.
1.3.6.1.4.1.2011.10.2.42.1.8.0.35current
h3cEponOnuLaserFailedTrap
NOTIFICATION-TYPE
A h3cEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life).
1.3.6.1.4.1.2011.10.2.42.1.8.0.36current
h3cOnuSmlkSwitchoverTrap
NOTIFICATION-TYPE
A h3cOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected.
1.3.6.1.4.1.2011.10.2.42.1.8.0.37current