MIBs Depot

H3C-DOT11-WLANEXT-MIB

Registered at
1.3.6.1.4.1.2011.10.2.75.7
Last updated
2007-06-08 20:00
Organization
HUAWEI-3COM Technologies Co., Ltd.
Revisions
2007-06-08 20:00
Namespace
huawei
Source file
H3C-DOT11-WLANEXT-MIB
Digest
sha256:249e7473406b3e6a9e580f5ffd4e63bbb385fc890c06d969406059cc193924ef

Description

This MIB provides more information for WLAN network. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11e Standard to define the MAC procedures to support LAN applications with Quality of Service (QoS) requirements, including the transport of voice, audio and video over IEEE 802.11 wireless LANs. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.

Contact

Platform Team HUAWEI-3COM Technologies Co., Ltd. Hai-Dian District Beijing P.R. China Http://www.huawei-3com.com Zip:100085

Imports

FromSymbols
H3C-DOT11-REF-MIBH3cDot11ObjectIDType, H3cDot11QosAcType, H3cDot11RadioScopeType, h3cDot11
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

H3C-DOT11-REF-MIB
H3C-DOT11-WLANEXT-MIB
HUAWEI-3COM-OID-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
h3cDot11RFGroup
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.75.7.1
h3cDot11RFSignalStatisTable
OBJECT-TYPE
The table will describe statistic information of signal strength for AP radio.
1.3.6.1.4.1.2011.10.2.75.7.1.1not-accessiblecurrent
h3cDot11RFSignalStatisEntry
OBJECT-TYPE
Each entry contains the signal of each signal strength information of a specific AP.
1.3.6.1.4.1.2011.10.2.75.7.1.1.1not-accessiblecurrent
h3cDot11RFAPID
OBJECT-TYPE
To identify each AP, and AP is running status.
1.3.6.1.4.1.2011.10.2.75.7.1.1.1.1H3cDot11ObjectIDTypenot-accessiblecurrent
h3cDot11RFRadioID
OBJECT-TYPE
Represents each radio.
1.3.6.1.4.1.2011.10.2.75.7.1.1.1.2H3cDot11RadioScopeTypenot-accessiblecurrent
h3cDot11RFSignalStatisInterv
OBJECT-TYPE
Represents the interval of statistic.
1.3.6.1.4.1.2011.10.2.75.7.1.1.1.3Integer32read-onlycurrent
h3cDot11RFAverageSignalStrength
OBJECT-TYPE
Represents the average value of signal strength for stations on a specific radio.
1.3.6.1.4.1.2011.10.2.75.7.1.1.1.4Integer32read-onlycurrent
h3cDot11RFMaxSignalStrength
OBJECT-TYPE
Represents the maximum value of signal strength for stations on a specific radio.
1.3.6.1.4.1.2011.10.2.75.7.1.1.1.5Integer32read-onlycurrent
h3cDot11RFMinSignalStrength
OBJECT-TYPE
Represents the minimum value of signal strength for stations on a specific radio.
1.3.6.1.4.1.2011.10.2.75.7.1.1.1.6Integer32read-onlycurrent
h3cDot11QosGroup
OBJECT-IDENTITY
1.3.6.1.4.1.2011.10.2.75.7.2
h3cDot11QosStatisTable
OBJECT-TYPE
The table defines the attributes for the Qos feature of radio.
1.3.6.1.4.1.2011.10.2.75.7.2.1not-accessiblecurrent
h3cDot11QosStatisEntry
OBJECT-TYPE
Each entry contains information of the Qos attribute of each radio.
1.3.6.1.4.1.2011.10.2.75.7.2.1.1not-accessiblecurrent
h3cDot11QosAPID
OBJECT-TYPE
To uniquely identify a AP in running status.
1.3.6.1.4.1.2011.10.2.75.7.2.1.1.1H3cDot11ObjectIDTypenot-accessiblecurrent
h3cDot11QosRadioID
OBJECT-TYPE
Represents each radio.
1.3.6.1.4.1.2011.10.2.75.7.2.1.1.2H3cDot11RadioScopeTypenot-accessiblecurrent
h3cDot11QosAverageQueLen
OBJECT-TYPE
The average frame numbers to be sent out in the queue.
1.3.6.1.4.1.2011.10.2.75.7.2.1.1.3Integer32read-onlycurrent
h3cDot11QosDropFrameRatio
OBJECT-TYPE
The ratio of dropped frames in a minute because of full queue.
1.3.6.1.4.1.2011.10.2.75.7.2.1.1.4Integer32read-onlycurrent
h3cDot11QosAverageDataRate
OBJECT-TYPE
The average transmit data rate of radio.
1.3.6.1.4.1.2011.10.2.75.7.2.1.1.5Integer32read-onlycurrent
h3cDot11QosAcStatisTable
OBJECT-TYPE
The table defines the parameters for Qos access category.
1.3.6.1.4.1.2011.10.2.75.7.2.2not-accessiblecurrent
h3cDot11QosAcStatisEntry
OBJECT-TYPE
Each entry contains information of each Qos access category.
1.3.6.1.4.1.2011.10.2.75.7.2.2.1not-accessiblecurrent
h3cDot11QosAcType
OBJECT-TYPE
The access category type.
1.3.6.1.4.1.2011.10.2.75.7.2.2.1.1H3cDot11QosAcTypenot-accessiblecurrent
h3cDot11AcDropFrameCnt
OBJECT-TYPE
The number of dropped frames in a minute for one specific access category because of full queue.
1.3.6.1.4.1.2011.10.2.75.7.2.2.1.2Counter32read-onlycurrent