H3C-DOT11-APMT-MIB
- Registered at
- 1.3.6.1.4.1.2011.10.2.75.2
- Last updated
- 2010-10-11 12:00
- Organization
- Hangzhou H3C Technologies Co., Ltd.
- Revisions
- 2010-10-11 18:00, 2010-09-15 12:00, 2009-08-07 18:00, 2009-07-29 18:00, 2009-05-07 20:00, 2008-11-07 10:00, 2008-07-09 18:00, 2008-02-25 18:00, 2007-12-21 18:00, 2007-06-19 18:00, 2007-04-27 20:00, 2007-02-01 20:00, 2006-05-10 19:00
- Namespace
- huawei
- Source file
H3C-DOT11-APMT-MIB- Digest
sha256:7a440972a93ed282e869a78d1fa6a3dc51b88fb03529b896b29faf1900d1cbf4
Description
This MIB provides AP information which includes AP current object information, AP statistic data. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable STA invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association.
Contact
Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085
Imports
| From | Symbols |
|---|---|
| H3C-DOT11-REF-MIB | H3cDot11ChannelScopeType, H3cDot11MACModeType, H3cDot11NotifyReasonType, H3cDot11ObjectIDType, H3cDot11RFModeType, H3cDot11RadioElementIndex, H3cDot11RadioScopeType, H3cDot11SSIDStringType, H3cDot11ServicePolicyIDType, H3cDot11TxPwrLevelScopeType, h3cDot11, h3cDot11APElementIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
H3C-DOT11-APMT-MIB H3C-DOT11-REF-MIB HUAWEI-3COM-OID-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| h3cDot11APObjectGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.75.2.1 | |||
| h3cDot11APObjectStatusTable OBJECT-TYPE The table will provide the general information about APs in different status. | 1.3.6.1.4.1.2011.10.2.75.2.1.1 | not-accessible | current | |
| h3cDot11APObjectStatusEntry OBJECT-TYPE Each entry contains the general information of an AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1 | not-accessible | current | |
| h3cDot11APID OBJECT-TYPE To uniquely identify each AP, and relation-ship between h3cDot11APID and AP device will be static. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.1 | H3cDot11ObjectIDType | accessible-for-notify | current |
| h3cDot11APIPAddress OBJECT-TYPE Represents the IP address of an AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.2 | IpAddress | read-only | current |
| h3cDot11APMacAddress OBJECT-TYPE Represents the MAC address of an AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.3 | MacAddress | read-only | current |
| h3cDot11APOperationStatus OBJECT-TYPE Represents operational status of AP. The following values are supported: join(1) - AP is joining to AC. joinConfirm(2) - AC confirm whether permit AP to join. download(3) - AP is downloading software from AC. config(4) - AP and AC exchange configuration before AP - provide WLAN service. run(5) - The WLAN service is ready. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.4 | INTEGER {join(1), joinConfirm(2), download(3), config(4), run(5)} | read-only | current |
| h3cDot11APTemplateNameOfAP OBJECT-TYPE Represents the name of current AP template configured for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.5 | OCTET STRING | read-only | current |
| h3cDot11APReset OBJECT-TYPE When read the value from the node 2: Represents the AP can not be reseted. 1: Represents the AP can be reseted. When write the value to the node 1: Represents reseting the AP. Other values are not supported | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.6 | TruthValue | read-write | current |
| h3cDot11APCpuUsage OBJECT-TYPE Represents the current CPU usage for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.7 | Integer32 (0..100) | read-only | current |
| h3cDot11APConnectionType OBJECT-TYPE Represents the current connection type. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.8 | INTEGER {master(1), slave(2), notAvailable(3)} | read-only | current |
| h3cDot11APLastImgDownloadTime OBJECT-TYPE Represents the time at which the device last downloaded image. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.9 | DateAndTime | read-only | current |
| h3cDot11APIPv6Address OBJECT-TYPE Represents the IPv6 address of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.10 | OCTET STRING | read-only | current |
| h3cDot11APLastRegisterTime OBJECT-TYPE Represents the time at which the device last registered with AC. | 1.3.6.1.4.1.2011.10.2.75.2.1.1.1.11 | DateAndTime | read-only | current |
| h3cDot11APObjectTable OBJECT-TYPE The table will provide information for APs in the running status. | 1.3.6.1.4.1.2011.10.2.75.2.1.2 | not-accessible | current | |
| h3cDot11APObjectEntry OBJECT-TYPE Each entry contains information of an AP in run status. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1 | not-accessible | current | |
| h3cDot11APObjID OBJECT-TYPE To uniquely identify each AP, and relation-ship between h3cDot11APObjID and AP device will be static. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.1 | H3cDot11ObjectIDType | not-accessible | current |
| h3cDot11CurrAPIPAddress OBJECT-TYPE Represents the IP address of an AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.2 | IpAddress | read-only | current |
| h3cDot11CurrAPMacAddress OBJECT-TYPE Represents the MAC address of an AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.3 | MacAddress | read-only | current |
| h3cDot11CurrACPortIndex OBJECT-TYPE Represents the port on the AC, by which the traffic of this AP comes through. NMS could refer it to access information kept in the MIB-2. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.4 | Integer32 | read-only | current |
| h3cDot11CurrAPMACMode OBJECT-TYPE Represents what MAC mode defined in the CAPWAP is applied. For fat AP, the value will be fatap. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.5 | H3cDot11MACModeType | read-only | current |
| h3cDot11CurrAPTemplateName OBJECT-TYPE Represents the name of current AP template. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.6 | OCTET STRING | read-only | current |
| h3cDot11CurrAPStationAssocCount OBJECT-TYPE Represents the total number of stations which are associating to AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.7 | Integer32 | read-only | current |
| h3cDot11CurrAPName OBJECT-TYPE Represents the name of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.8 | OCTET STRING | read-only | current |
| h3cDot11CurrAPModelName OBJECT-TYPE Represents index of WTP model,with it to get AP model information. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.9 | OCTET STRING | read-only | current |
| h3cDot11CurrAPImageName OBJECT-TYPE Represents the image file name of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.10 | OCTET STRING | read-only | current |
| h3cDot11CurrAPSoftwareVersion OBJECT-TYPE Represents the software version of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.11 | OCTET STRING | read-only | current |
| h3cDot11CurrAPIPNetMask OBJECT-TYPE Represents the IP netmask of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.12 | IpAddress | read-only | current |
| h3cDot11CurrRadioModeSupport OBJECT-TYPE Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11n(8) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4). | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.13 | Integer32 | read-only | current |
| h3cDot11CurrIfNumber OBJECT-TYPE Represents number of interface of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.14 | Integer32 | read-only | current |
| h3cDot11CurrAPElementID OBJECT-TYPE Represents the AP element ID. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.15 | Integer32 | read-only | current |
| h3cDot11CurrAPMode OBJECT-TYPE Represents the forward mode of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.16 | INTEGER {bridge(1), route(2)} | read-only | current |
| h3cDot11CurrAPIPv6Address OBJECT-TYPE Represents the IPv6 address of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.17 | OCTET STRING | read-only | current |
| h3cDot11CurrAPSSIDNumber OBJECT-TYPE Represents the number of SSID configured on AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.18 | Integer32 | read-only | current |
| h3cDot11CurrAPManufacturer OBJECT-TYPE By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.19 | OCTET STRING | read-only | current |
| h3cDot11CurrAPMemorySize OBJECT-TYPE Represents the size of AP memory. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.20 | Integer32 | read-only | current |
| h3cDot11CurrAPMemSizeInBytes OBJECT-TYPE Represents the size of AP memory. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.21 | Integer32 | read-only | current |
| h3cDot11CurrAPFlashSize OBJECT-TYPE Represents the size of AP flash. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.22 | Integer32 | read-only | current |
| h3cDot11CurrAPFlashSizeInBytes OBJECT-TYPE This object represents the size of AP flash. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.23 | Integer32 | read-only | current |
| h3cDot11CurrAPReleasedVersion OBJECT-TYPE Represents the released version of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.24 | OCTET STRING | read-only | current |
| h3cDot11CurrRadioModeSupport2 OBJECT-TYPE Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4). | 1.3.6.1.4.1.2011.10.2.75.2.1.2.1.25 | Integer32 | read-only | current |
| h3cDot11APRadioTable OBJECT-TYPE The table will describe the radio information of AP. The AP here will be in running status. | 1.3.6.1.4.1.2011.10.2.75.2.1.3 | not-accessible | current | |
| h3cDot11APRadioEntry OBJECT-TYPE Each entry contains the information of each radio of a specific AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1 | not-accessible | current | |
| h3cDot11CurAPID OBJECT-TYPE To uniquely identify a AP in running status. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.1 | H3cDot11ObjectIDType | not-accessible | current |
| h3cDot11RadioID OBJECT-TYPE Represents each radio. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.2 | H3cDot11RadioScopeType | accessible-for-notify | current |
| h3cDot11AdminStatus OBJECT-TYPE Represents the administrator status of radio. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.3 | TruthValue | read-only | current |
| h3cDot11OperStatus OBJECT-TYPE Represents the operational status of radio. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.4 | TruthValue | read-only | current |
| h3cDot11Channel OBJECT-TYPE Represents the current channel allocation for radio. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.5 | H3cDot11ChannelScopeType | read-only | current |
| h3cDot11TxPowerLevel OBJECT-TYPE Represents the current transmit power level for radio. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.6 | H3cDot11TxPwrLevelScopeType | read-only | current |
| h3cDot11APRadioIfIndex OBJECT-TYPE Represents the interface index for the radio. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.7 | Integer32 | read-only | current |
| h3cDot11AntennaGain OBJECT-TYPE Represents the current gain for antenna. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.8 | Integer32 | read-only | current |
| h3cDot11MaxBandwidth OBJECT-TYPE Represents the maximum bandwidth for the radio. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.9 | Integer32 | read-only | current |
| h3cDot11ResourceUseRatio OBJECT-TYPE Represents the ratio of radio resource usage. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.10 | Integer32 | read-only | current |
| h3cDot11RadioModeSupport OBJECT-TYPE Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11gn(16), dot11an(32). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4). | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.11 | Unsigned32 | read-only | current |
| h3cDot11TxPowerLevel2 OBJECT-TYPE The TxPowerLevel N currently being used to transmit data. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.12 | INTEGER (1..8) | read-only | current |
| h3cDot11PowerMgmtStatus OBJECT-TYPE Represents status of power management of the radio. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.13 | TruthValue | read-only | current |
| h3cDot11ChannelSwitchTimes OBJECT-TYPE Represents the channel switch times. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.14 | Counter32 | read-only | current |
| h3cDot11AntennaType OBJECT-TYPE Represents type of the antenna which radio used. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.15 | OCTET STRING | read-only | current |
| h3cDot11DiversitySelectionRx OBJECT-TYPE Represents the diversity selection received. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.16 | TruthValue | read-only | current |
| h3cDot11MaxTxPwrLvl OBJECT-TYPE Represents the maximum transmit power. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.17 | OCTET STRING | read-only | current |
| h3cDot11PwrAttRange OBJECT-TYPE Represents the range of power attenuation. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.18 | Integer32 | read-only | current |
| h3cDot11AvgRxSignalStrength OBJECT-TYPE Represents the average received signal strength. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.19 | Integer32 | read-only | current |
| h3cDot11HighestRxSignalStrength OBJECT-TYPE Represents the highest received signal strength. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.20 | Integer32 | read-only | current |
| h3cDot11LowestRxSignalStrength OBJECT-TYPE Represents the lowest received signal strength. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.21 | Integer32 | read-only | current |
| h3cDot11RadioIfUpdownTimes OBJECT-TYPE Represents the up/down times on radio interface. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.22 | Counter32 | read-only | current |
| h3cDot11RadioIfLastChange OBJECT-TYPE Represents time at last change that occurred on radio interface. | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.23 | TimeTicks | read-only | current |
| h3cDot11RadioModeSupport2 OBJECT-TYPE Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4). | 1.3.6.1.4.1.2011.10.2.75.2.1.3.1.24 | Unsigned32 | read-only | current |
| h3cDot11APBSSTable OBJECT-TYPE After AP connect to AC and get AP template configuration, it will create BSS data structure for each radio. The table will describe BSS information of AP and service policy as per BSS. | 1.3.6.1.4.1.2011.10.2.75.2.1.4 | not-accessible | current | |
| h3cDot11APBSSEntry OBJECT-TYPE Each entry contains information of each BSS for specific radio. | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1 | not-accessible | current | |
| h3cDot11WlanID OBJECT-TYPE Represents ID of a specific ESS. | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.1 | Integer32 | not-accessible | current |
| h3cDot11BSSID OBJECT-TYPE As MAC Address format, it is to identify BSS. | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.2 | MacAddress | read-only | current |
| h3cDot11CurrSvcPolicyID OBJECT-TYPE Represents the ID of each service policy used by the AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.3 | H3cDot11ServicePolicyIDType | read-only | current |
| h3cDot11SSID OBJECT-TYPE This object represents the SSID corresponding to this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.4 | OCTET STRING | read-only | current |
| h3cDot11CurrSSIDResourceUseRatio OBJECT-TYPE Represents the ratio of resource usage of curr SSID | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.5 | Integer32 | read-only | current |
| h3cDot11APEssVlanId OBJECT-TYPE This object represents the VlanID of the interface ESS corresponding to this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.1.4.1.6 | Integer32 | read-only | current |
| h3cDot11APModelTable OBJECT-TYPE The table defines the capability information for a specific kind of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.5 | not-accessible | current | |
| h3cDot11APModelEntry OBJECT-TYPE Each entry contains capability information for a specific kind of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1 | not-accessible | current | |
| h3cDot11APModelAlias OBJECT-TYPE Represents alias of AP model name. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.1 | OCTET STRING (SIZE(0..127)) | not-accessible | current |
| h3cDot11APModelName OBJECT-TYPE Represents AP model name(like WA2100). | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.2 | OCTET STRING | read-only | current |
| h3cDot11RadioNumSupport OBJECT-TYPE Represents how many radios the specific AP model could support. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.3 | H3cDot11RadioScopeType | read-only | current |
| h3cDot11StationNumSupport OBJECT-TYPE Represents how many station could be supported by a specific AP model. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.4 | Integer32 | read-only | current |
| h3cDot11MACModeSupport OBJECT-TYPE Represents the MAC mode type could be supported by a specific AP model. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.5 | H3cDot11MACModeType | read-only | current |
| h3cDot11APManufacturer OBJECT-TYPE By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.6 | OCTET STRING | read-only | current |
| h3cDot11APCPUType OBJECT-TYPE Represents the CPU type of AP | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.7 | OCTET STRING | read-only | current |
| h3cDot11APCPUClockSpeed OBJECT-TYPE Represents the clock speed of CPU. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.8 | Unsigned32 | read-only | current |
| h3cDot11APMemoryType OBJECT-TYPE Represents the memory card type of AP | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.9 | OCTET STRING | read-only | current |
| h3cDot11APFlashType OBJECT-TYPE Represents the flash card type of AP | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.11 | OCTET STRING | read-only | current |
| h3cDot11APFlashSize OBJECT-TYPE Represents the size of AP flash card. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.12 | Unsigned32 | read-only | current |
| h3cDot11APMemSize OBJECT-TYPE Represents the size of AP memory card. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.13 | Gauge32 | read-only | current |
| h3cDot11APFlashSizeInBytes OBJECT-TYPE This object represents the size of AP flash card in bytes. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.14 | Unsigned32 | read-only | current |
| h3cDot11APMemorySize OBJECT-TYPE Represents the size of AP memory card. | 1.3.6.1.4.1.2011.10.2.75.2.1.5.1.20 | Unsigned32 | read-only | current |
| h3cDot11APIfTable OBJECT-TYPE This table represents the AP interface informations. | 1.3.6.1.4.1.2011.10.2.75.2.1.6 | not-accessible | current | |
| h3cDot11APIfEntry OBJECT-TYPE Each entry of the table will provide data for the interface of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1 | not-accessible | current | |
| h3cDot11APIfIndex OBJECT-TYPE Represents the index for a interface. | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.1 | Integer32 | not-accessible | current |
| h3cDot11APIfDescr OBJECT-TYPE Represents the interface description for a interface. | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.2 | OCTET STRING | read-only | current |
| h3cDot11APIfType OBJECT-TYPE Represents the interface type for a interface. | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.3 | Integer32 | read-only | current |
| h3cDot11APIfMtu OBJECT-TYPE Represents size of the largest datagram which can be sent/received on the interface, specified in octets. | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.4 | Integer32 | read-write | current |
| h3cDot11APIfPHYAddress OBJECT-TYPE Represents the PHY address of interface. | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.5 | OCTET STRING | read-only | current |
| h3cDot11APIfSpeed OBJECT-TYPE Represents maximum bandwidth of this interface. | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.6 | Integer32 | read-only | current |
| h3cDot11APIfInDataRate OBJECT-TYPE Represents the average input data rate of this interface in latest 300 seconds. | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.7 | Integer32 | read-only | current |
| h3cDot11APIfOutDataRate OBJECT-TYPE Represents the average output data rate of this interface in latest 300 seconds. | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.8 | Integer32 | read-only | current |
| h3cDot11APIfSpeedKbps OBJECT-TYPE Represents maximum bandwidth of this interface. | 1.3.6.1.4.1.2011.10.2.75.2.1.6.1.9 | Gauge32 | read-only | current |
| h3cDot11APSSIDObjectTable OBJECT-TYPE This table provides BSSID number configuration information based on SSID. | 1.3.6.1.4.1.2011.10.2.75.2.1.7 | not-accessible | current | |
| h3cDot11APSSIDObjectEntry OBJECT-TYPE Each entry provides BSSID number configuration information of a SSID. | 1.3.6.1.4.1.2011.10.2.75.2.1.7.1 | not-accessible | current | |
| h3cDot11APConfigSPID OBJECT-TYPE Represents the service policy ID. | 1.3.6.1.4.1.2011.10.2.75.2.1.7.1.1 | H3cDot11ServicePolicyIDType | not-accessible | current |
| h3cDot11APConfigSSIDName OBJECT-TYPE Represents the SSID name of this service policy. | 1.3.6.1.4.1.2011.10.2.75.2.1.7.1.2 | H3cDot11SSIDStringType | read-only | current |
| h3cDot11APConfigBSSIDNum OBJECT-TYPE Represents the number of BSSID that be configured with current SSID. | 1.3.6.1.4.1.2011.10.2.75.2.1.7.1.3 | Integer32 | read-only | current |
| h3cDot11APConfigPortalStaNum OBJECT-TYPE Represents the total number of associated protal stations with current SSID. | 1.3.6.1.4.1.2011.10.2.75.2.1.7.1.4 | Integer32 | read-only | current |
| h3cDot11APSysInfoTable OBJECT-TYPE The table provides the system information of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.8 | not-accessible | current | |
| h3cDot11APSysInfoEntry OBJECT-TYPE Each entry provides system information of an AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1 | not-accessible | current | |
| h3cDot11APSysUpTime OBJECT-TYPE Represents how long AP has been powered on. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.1 | TimeTicks | read-only | current |
| h3cDot11APCPURTUsage OBJECT-TYPE Represents the CPU real time usage for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.2 | Integer32 (0..100) | read-only | current |
| h3cDot11APCPUAvgUsage OBJECT-TYPE Represents the CPU average usage for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.3 | Integer32 (0..100) | read-only | current |
| h3cDot11APMemRTUsage OBJECT-TYPE Represents the memory real time usage for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.4 | Integer32 (0..100) | read-only | current |
| h3cDot11APMemAvgUsage OBJECT-TYPE Represents the average memory usage for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.5 | Integer32 (0..100) | read-only | current |
| h3cDot11APIPAddressGateway OBJECT-TYPE Represents the IP address gateway for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.6 | IpAddress | read-only | current |
| h3cDot11APACAssociateStatus OBJECT-TYPE Represents associate status of AP and AC. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.7 | INTEGER {associated(1), deassociated(2), downloadingImage(3)} | read-only | current |
| h3cDot11APManuBuildInfo OBJECT-TYPE Represents the device version information for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.8 | OCTET STRING (SIZE(0..255)) | read-only | current |
| h3cDot11APFlashFreeSize OBJECT-TYPE Represents the free size of AP flash card. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.9 | Unsigned32 | read-only | current |
| h3cDot11APTemperature OBJECT-TYPE Represents the device temperature information for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.8.1.10 | INTEGER | read-only | current |
| h3cDot11APIdleListTable OBJECT-TYPE This table provides the list of idle AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.9 | not-accessible | current | |
| h3cDot11APIdleListEntry OBJECT-TYPE Each entry provides information of a idle AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.9.1 | not-accessible | current | |
| h3cDot11APIdleTemplateName OBJECT-TYPE Represents the name of idle AP template. | 1.3.6.1.4.1.2011.10.2.75.2.1.9.1.1 | OCTET STRING (SIZE(0..127)) | not-accessible | current |
| h3cDot11APIdleSerialID OBJECT-TYPE Represents AP serial ID. | 1.3.6.1.4.1.2011.10.2.75.2.1.9.1.2 | OCTET STRING | read-only | current |
| h3cDot11APSysInfoByAPIDTable OBJECT-TYPE The table provides the system information of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.10 | not-accessible | current | |
| h3cDot11APSysInfoByAPIDEntry OBJECT-TYPE Each entry provides system information of an AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1 | not-accessible | current | |
| h3cDot11APSysUpTime2 OBJECT-TYPE Represents how long AP has been powered on. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.1 | TimeTicks | read-only | current |
| h3cDot11APCPURTUsage2 OBJECT-TYPE Represents the CPU real time usage for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.2 | Integer32 (0..100) | read-only | current |
| h3cDot11APCPUAvgUsage2 OBJECT-TYPE Represents the CPU average usage for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.3 | Integer32 (0..100) | read-only | current |
| h3cDot11APMemRTUsage2 OBJECT-TYPE Represents the memory real time usage for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.4 | Integer32 (0..100) | read-only | current |
| h3cDot11APMemAvgUsage2 OBJECT-TYPE Represents the average memory usage for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.5 | Integer32 (0..100) | read-only | current |
| h3cDot11APIPAddressGateway2 OBJECT-TYPE Represents the IP address gateway for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.6 | IpAddress | read-only | current |
| h3cDot11APACAssociateStatus2 OBJECT-TYPE Represents associate status of AP and AC. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.7 | INTEGER {associated(1), deassociated(2), downloadingImage(3)} | read-only | current |
| h3cDot11APManuBuildInfo2 OBJECT-TYPE Represents the device version information for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.8 | OCTET STRING (SIZE(0..255)) | read-only | current |
| h3cDot11APFlashFreeSize2 OBJECT-TYPE Represents the free size of AP flash card. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.9 | Unsigned32 | read-only | current |
| h3cDot11APTemperature2 OBJECT-TYPE Represents the device temperature information for AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.10 | Integer32 | read-only | current |
| h3cDot11APMacAddress2 OBJECT-TYPE Represents the MAC address of AP. | 1.3.6.1.4.1.2011.10.2.75.2.1.10.1.11 | MacAddress | read-only | current |
| h3cDot11APStatisGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.75.2.2 | |||
| h3cDot11APRxStatisTable OBJECT-TYPE The table will provide the receiving statistic for a specific radio of AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.1 | not-accessible | current | |
| h3cDot11APRxStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data for each radio of a specific AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1 | not-accessible | current | |
| h3cDot11RxFrameDupCnt OBJECT-TYPE Represents the number of duplicate frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.1 | Counter32 | read-only | current |
| h3cDot11RxFrameCnt OBJECT-TYPE Represents the number of frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.2 | Counter32 | read-only | current |
| h3cDot11RxUcastFrameCnt OBJECT-TYPE Represents the number of unicast frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.3 | Counter32 | read-only | current |
| h3cDot11RxBcastFrameCnt OBJECT-TYPE Represents the number of broadcast frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.4 | Counter32 | read-only | current |
| h3cDot11RxMcastFrameCnt OBJECT-TYPE Represents the number of multicast frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.5 | Counter32 | read-only | current |
| h3cDot11RxDiscardFrameCnt OBJECT-TYPE Represents the number of frames discarded by AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.6 | Counter32 | read-only | current |
| h3cDot11RxFragCnt OBJECT-TYPE Represents the number of frame fragments reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.7 | Counter32 | read-only | current |
| h3cDot11RxFcsErrCnt OBJECT-TYPE Represents the number of FCS error frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.8 | Counter32 | read-only | current |
| h3cDot11RxFrameBytes OBJECT-TYPE Represents the bytes of frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.9 | Counter32 | read-only | current |
| h3cDot11RxUcastFrameBytes OBJECT-TYPE Represents the bytes of unicast frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.10 | Counter32 | read-only | current |
| h3cDot11RxBcastFrameBytes OBJECT-TYPE Represents the bytes of broadcast frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.11 | Counter32 | read-only | current |
| h3cDot11RxMcastFrameBytes OBJECT-TYPE Represents the bytes of multicast frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.12 | Counter32 | read-only | current |
| h3cDot11RxDiscardFrameBytes OBJECT-TYPE Represents the bytes of frames discarded by AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.13 | Counter32 | read-only | current |
| h3cDot11RxMgmtFrameCnt OBJECT-TYPE Represents the number of management frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.14 | Counter32 | read-only | current |
| h3cDot11RxCtrlFrameCnt OBJECT-TYPE Represents the number of control frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.15 | Counter32 | read-only | current |
| h3cDot11RxDataFrameCnt OBJECT-TYPE Represents the number of data frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.16 | Counter32 | read-only | current |
| h3cDot11RxDecryptErrorCnt OBJECT-TYPE Represents the number of decryption error. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.17 | Counter32 | read-only | current |
| h3cDot11RxAuthenFrameCnt OBJECT-TYPE Represents the number of authentication frame reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.18 | Counter32 | read-only | current |
| h3cDot11RxAssociateFrameCnt OBJECT-TYPE Represents the number of associate frame reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.19 | Counter32 | read-only | current |
| h3cDot11RxFrameErrorRatio OBJECT-TYPE Represents the ratio of error frame. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.20 | Integer32 | read-only | current |
| h3cDot11RxPhyErrorCnt OBJECT-TYPE Represents the number of physical reception error. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.21 | Counter32 | read-only | current |
| h3cDot11RxMICErrorCnt OBJECT-TYPE Represents the number of MIC verification error. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.22 | Counter32 | read-only | current |
| h3cDot11RxDataFrameBytes OBJECT-TYPE Represents the bytes of data frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.23 | Counter32 | read-only | current |
| h3cDot11RadioRxAverSnr OBJECT-TYPE Represents the average signal noise rate of this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.24 | Integer32 | read-only | current |
| h3cDot11RxPayloadBytes OBJECT-TYPE Represents the payload bytes of data frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.25 | Counter32 | read-only | current |
| h3cDot11RxTrafficSpeed OBJECT-TYPE Represents the bytes of frames reception per second. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.26 | Integer32 | read-only | current |
| h3cDot11RxUcastDataFrameCnt OBJECT-TYPE Represents the number of unicast data frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.27 | Counter64 | read-only | current |
| h3cDot11RxNUcastDataFrameCnt OBJECT-TYPE Represents the number of non-unicast data frames reception. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.28 | Counter64 | read-only | current |
| h3cDot11RxTotalDiscardFrameCnt OBJECT-TYPE Represents the number of total frames discarded by radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.29 | Counter64 | read-only | current |
| h3cDot11RxTotalIPCheckErrPacketCnt OBJECT-TYPE Represents the total number of IP checksum error packets received through the current radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.1.1.30 | Counter64 | read-only | current |
| h3cDot11APTxStatisTable OBJECT-TYPE The table will provide the transmission statistic for a specific radio of AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.2 | not-accessible | current | |
| h3cDot11APTxStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data for each radio of a specific AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1 | not-accessible | current | |
| h3cDot11TxFragCnt OBJECT-TYPE Represents the number of fragmented frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.1 | Counter32 | read-only | current |
| h3cDot11FailedCnt OBJECT-TYPE Represents the number of transmission failures. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.2 | Counter32 | read-only | current |
| h3cDot11RetryCnt OBJECT-TYPE Represents the number of transmit retries. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.3 | Counter32 | read-only | current |
| h3cDot11MultiRetryCnt OBJECT-TYPE Represents the number of transmits that required more than one retry. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.4 | Counter32 | read-only | current |
| h3cDot11RtsSuccessCnt OBJECT-TYPE Represents the number of successful RTS (Request to send) transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.5 | Counter32 | read-only | current |
| h3cDot11RtsFailCnt OBJECT-TYPE Represents the number of RTS transmission failures. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.6 | Counter32 | read-only | current |
| h3cDot11AckFailCnt OBJECT-TYPE Represents the number of acknowledgement failures. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.7 | Counter32 | read-only | current |
| h3cDot11TxFrameCnt OBJECT-TYPE Represents the total number of frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.8 | Counter32 | read-only | current |
| h3cDot11TxUcastFrameCnt OBJECT-TYPE Represents the number of unicast frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.9 | Counter32 | read-only | current |
| h3cDot11TxBcastFrameCnt OBJECT-TYPE Represents the number of broadcast frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.10 | Counter32 | read-only | current |
| h3cDot11TxMcastFrameCnt OBJECT-TYPE Represents the number of multicast frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.11 | Counter32 | read-only | current |
| h3cDot11TxDiscardFrameCnt OBJECT-TYPE Represents the number of frames discarded by AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.12 | Counter32 | read-only | current |
| h3cDot11TxFrameBytes OBJECT-TYPE Represents the total bytes of frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.13 | Counter32 | read-only | current |
| h3cDot11TxUcastFrameBytes OBJECT-TYPE Represents the bytes of unicast frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.14 | Counter32 | read-only | current |
| h3cDot11TxBcastFrameBytes OBJECT-TYPE Represents the bytes of broadcast frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.15 | Counter32 | read-only | current |
| h3cDot11TxMcastFrameBytes OBJECT-TYPE Represents the bytes of multicast frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.16 | Counter32 | read-only | current |
| h3cDot11TxDiscardFrameBytes OBJECT-TYPE Represents the bytes of multicast frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.17 | Counter32 | read-only | current |
| h3cDot11TxAuthenFrameCnt OBJECT-TYPE Represents the number of authentication frame transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.18 | Counter32 | read-only | current |
| h3cDot11TxAssociateFrameCnt OBJECT-TYPE Represents the number of associate frame transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.19 | Counter32 | read-only | current |
| h3cDot11TxFrameRetryRatio OBJECT-TYPE Represents the ratio of retry frame. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.20 | Integer32 | read-only | current |
| h3cDot11TxDataFrameCnt OBJECT-TYPE Represents the number of data frame transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.21 | Counter32 | read-only | current |
| h3cDot11TxDataFrameBytes OBJECT-TYPE Represents the bytes of data frame transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.22 | Counter32 | read-only | current |
| h3cDot11TxMSDUCnt OBJECT-TYPE Represents the total number of MSDU transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.23 | Counter32 | read-only | current |
| h3cDot11TxDiscardMSDUCnt OBJECT-TYPE Represents the number of discarded MSDU transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.24 | Counter32 | read-only | current |
| h3cDot11RetryMSDUCnt OBJECT-TYPE Represents the number of retransfer MSDU. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.25 | Counter32 | read-only | current |
| h3cDot11TxPayloadBytes OBJECT-TYPE Represents the payload bytes of data frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.26 | Counter32 | read-only | current |
| h3cDot11TxTrafficSpeed OBJECT-TYPE Represents the bytes of frames transmission per second. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.27 | Integer32 | read-only | current |
| h3cDot11TxErrFrameRatio OBJECT-TYPE Represents the ratio of error frame. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.28 | Integer32 | read-only | current |
| h3cDot11TxFrameRate OBJECT-TYPE Represents the count of frames transmission per second. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.29 | Integer32 | read-only | current |
| h3cDot11TxMgtFrameCnt OBJECT-TYPE Represents the number of transmitted management frames. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.30 | Counter32 | read-only | current |
| h3cDot11TxCtrlFrameCnt OBJECT-TYPE Represents the number of transmission control frames. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.31 | Counter32 | read-only | current |
| h3cDot11TxMACErrCnt OBJECT-TYPE Represents the count of MAC error frame. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.32 | Counter32 | read-only | current |
| h3cDot11TxErrFrameCnt OBJECT-TYPE Represents the count of error frame. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.33 | Counter32 | read-only | current |
| h3cDot11TxUcastDataFrameCnt OBJECT-TYPE Represents the number of unicast data frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.34 | Counter64 | read-only | current |
| h3cDot11TxNUcastDataFrameCnt OBJECT-TYPE Represents the number of non-unicast data frames transmission. | 1.3.6.1.4.1.2011.10.2.75.2.2.2.1.35 | Counter64 | read-only | current |
| h3cDot11APAssocStatisTable OBJECT-TYPE The table will provide the station association statistic for AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3 | not-accessible | current | |
| h3cDot11APAssocStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data of station association for AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1 | not-accessible | current | |
| h3cDot11ApStationAssocSum OBJECT-TYPE Represents the total number of station association with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.1 | Counter32 | read-only | current |
| h3cDot11ApStationAssocFailSum OBJECT-TYPE Represents the total number of station association failure with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.2 | Counter32 | read-only | current |
| h3cDot11ApStationReassocSum OBJECT-TYPE Represents the total number of station reassociation with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.3 | Counter32 | read-only | current |
| h3cDot11ApStationAssocRejectSum OBJECT-TYPE Represents the total number of station association rejected on account of resource limit with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.4 | Counter32 | read-only | current |
| h3cDot11ApStationExDeAuthenSum OBJECT-TYPE Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.5 | Counter32 | read-only | current |
| h3cDot11ApStationCurAssocSum OBJECT-TYPE Represents the total number of current associated stations with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.6 | Integer32 | read-only | current |
| h3cDot11ApStaCurAuthSuccSum OBJECT-TYPE Represents the successful number of station authentication with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.7 | Integer32 | read-only | current |
| h3cDot11AllStationUpSumTime OBJECT-TYPE Represents the sum of duration of all stations which associate with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.8 | Counter32 | read-only | current |
| h3cDot11ApStationAssocReqSum OBJECT-TYPE Represents the number of station association request with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.9 | Counter32 | read-only | current |
| h3cDot11AllStationUpSumTimeTicks OBJECT-TYPE Represents the sum of duration of all stations which associate with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.3.1.10 | TimeTicks | read-only | current |
| h3cDot11BSSRxStatisTable OBJECT-TYPE The table will provide the reception statistic for a specific BSS on a radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.4 | not-accessible | current | |
| h3cDot11BSSRxStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data for each BSS on a specific radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1 | not-accessible | current | |
| h3cDot11BSSRxFrameCnt OBJECT-TYPE Represents the number of frames reception with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.1 | Counter32 | read-only | current |
| h3cDot11BSSRxFrameBytes OBJECT-TYPE Represents the bytes of frames reception with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.2 | Counter32 | read-only | current |
| h3cDot11BSSRxDataFrameCnt OBJECT-TYPE Represents the number of data frames reception with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.3 | Counter32 | read-only | current |
| h3cDot11BSSRxDataFrameBytes OBJECT-TYPE Represents the bytes of data frames reception with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.4 | Counter32 | read-only | current |
| h3cDot11BSSRxAssociateFrameCnt OBJECT-TYPE Represents the number of associate frames reception with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.5 | Counter32 | read-only | current |
| h3cDot11BSSRxFrameErrorRatio OBJECT-TYPE Represents the ratio of error frames reception with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.6 | Integer32 | read-only | current |
| h3cDot11BSSRxPayloadBytes OBJECT-TYPE Represents the payload bytes of data frames reception with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.7 | Counter32 | read-only | current |
| h3cDot11BSSRxUniFrameCnt OBJECT-TYPE Represents the count of unicast frames received. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.8 | Counter32 | read-only | current |
| h3cDot11BSSRxNonUniFrameCnt OBJECT-TYPE Represents the count of non-unicast frames received. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.9 | Integer32 | read-only | current |
| h3cDot11BSSRxAuthenFrameCnt OBJECT-TYPE Represents the count of authentication frames received. | 1.3.6.1.4.1.2011.10.2.75.2.2.4.1.10 | Counter32 | read-only | current |
| h3cDot11BSSTxStatisTable OBJECT-TYPE The table will provide the transmission statistic for a specific BSS on a radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.5 | not-accessible | current | |
| h3cDot11BSSTxStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data for each BSS on a specific radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1 | not-accessible | current | |
| h3cDot11BSSTxFrameCnt OBJECT-TYPE Represents the total number of frames transmission with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.1 | Counter32 | read-only | current |
| h3cDot11BSSTxFrameBytes OBJECT-TYPE Represents the total number of bytes transmission with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.2 | Counter32 | read-only | current |
| h3cDot11BSSTxDataFrameCnt OBJECT-TYPE Represents the number of data frame transmission with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.3 | Counter32 | read-only | current |
| h3cDot11BSSTxDataFrameBytes OBJECT-TYPE Represents the bytes of data frame transmission with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.4 | Counter32 | read-only | current |
| h3cDot11BSSTxAssociateFrameCnt OBJECT-TYPE Represents the number of associate frame transmission with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.5 | Counter32 | read-only | current |
| h3cDot11BSSTxPayloadBytes OBJECT-TYPE Represents the payload bytes of data frame transmission with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.6 | Counter32 | read-only | current |
| h3cDot11BSSTxRetryCnt OBJECT-TYPE Represents the count of bytes retransmitted with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.7 | Counter32 | read-only | current |
| h3cDot11BSSTxUniFrameCnt OBJECT-TYPE Represents the count of unicast frames transmission with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.8 | Counter32 | read-only | current |
| h3cDot11BSSTxNonUniFrameCnt OBJECT-TYPE Represents the number of non-unicast frames transmission with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.9 | Integer32 | read-only | current |
| h3cDot11BSSTxAuthenFrameCnt OBJECT-TYPE Represents the count of authentication frames transmission with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.5.1.10 | Counter32 | read-only | current |
| h3cDot11BSSAssocStatisTable OBJECT-TYPE The table will provide the station association statistic for BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.6 | not-accessible | current | |
| h3cDot11BSSAssocStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data of station association for BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1 | not-accessible | current | |
| h3cDot11BSSStationAssocSum OBJECT-TYPE Represents the total number of station association with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.1 | Counter32 | read-only | current |
| h3cDot11BSSStationAssocFailSum OBJECT-TYPE Represents the total number of station association failure with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.2 | Counter32 | read-only | current |
| h3cDot11BSSStationReassocSum OBJECT-TYPE Represents the total number of station reassociation with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.3 | Counter32 | read-only | current |
| h3cDot11BSSStationAssocRejectSum OBJECT-TYPE Represents the total number of station association rejected on account of resource limit with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.4 | Counter32 | read-only | current |
| h3cDot11BSSStationExDeAssocSum OBJECT-TYPE Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.5 | Counter32 | read-only | current |
| h3cDot11BSSStationCurAssocSum OBJECT-TYPE Represents the total number of current associated stations with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.6 | Integer32 | read-only | current |
| h3cDot11BSSStationAssocReqSum OBJECT-TYPE Represents the total number of station association request with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.7 | Counter32 | read-only | current |
| h3cDot11BSSStationCurAuthSum OBJECT-TYPE Represents the total number of current associated stations which have passed portal or 1x authentication with this BSS. | 1.3.6.1.4.1.2011.10.2.75.2.2.6.1.8 | Integer32 | read-only | current |
| h3cDot11APLinkStatisTable OBJECT-TYPE The table will provide the link statistic for AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.7 | not-accessible | current | |
| h3cDot11APLinkStatisEntry OBJECT-TYPE Each entry provides the link statistic of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.7.1 | not-accessible | current | |
| h3cDot11UpLinkUpDownTimes OBJECT-TYPE Represents up/down times of uplink interface of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.7.1.1 | Counter32 | read-only | current |
| h3cDot11DownLinkUpDownTimes OBJECT-TYPE Represents up/down times of downlink interface of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.7.1.2 | Counter32 | read-only | current |
| h3cDot11RadioAssocStatisTable OBJECT-TYPE The table will provide the station association statistic for radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.8 | not-accessible | current | |
| h3cDot11RadioAssocStatisEntry OBJECT-TYPE Each entry of the table will provide the statistic data of station association for radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1 | not-accessible | current | |
| h3cDot11RadioStaAssocSum OBJECT-TYPE Represents the total number of station association with this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.1 | Counter32 | read-only | current |
| h3cDot11RadioStaAssocFailSum OBJECT-TYPE Represents the total number of station association failure with this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.2 | Counter32 | read-only | current |
| h3cDot11RadioStaReassocSum OBJECT-TYPE Represents the total number of station re-association with this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.3 | Counter32 | read-only | current |
| h3cDot11RadioStaAssocRejectSum OBJECT-TYPE Represents the total number of station association rejected on account of resource limit with this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.4 | Counter32 | read-only | current |
| h3cDot11RadioStaExDeAssocSum OBJECT-TYPE Represents the total number of exceptional station de-authentication (Without sending a de-authentication to AP) with this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.5 | Counter32 | read-only | current |
| h3cDot11RadioStaCurAssocSum OBJECT-TYPE Represents the total number of current associated stations with this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.8.1.6 | Integer32 | read-only | current |
| h3cDot11RadioMngFrameStatisTable OBJECT-TYPE The table will provide the management frame statistic for this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.9 | not-accessible | current | |
| h3cDot11RadioMngFrameStatisEntry OBJECT-TYPE Each entry of the table will provide the management frame statistic for this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.9.1 | not-accessible | current | |
| h3cDot11RadioStatisIndex OBJECT-TYPE Represents index of radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.9.1.1 | H3cDot11RadioElementIndex | not-accessible | current |
| h3cDot11MngFrameType OBJECT-TYPE Represents the type of the management frame on this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.9.1.2 | INTEGER {assocReq(1), assocResp(2), reassocReq(3), reassocResp(4), probeReq(5), probeResp(6), beacon(7), atim(8), disassociation(9), authentication(10), deauthentication(11), action(12)} | not-accessible | current |
| h3cDot11MngFrameCnt OBJECT-TYPE Represents the total number of each type for management frame on this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.9.1.3 | Counter32 | read-only | current |
| h3cDot11APAuthFailStatisTable OBJECT-TYPE The table will provide the authentication failure statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.10 | not-accessible | current | |
| h3cDot11APAuthFailStatisEntry OBJECT-TYPE Each entry of the table will provide the authentication failure statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.10.1 | not-accessible | current | |
| h3cDot11APAuthFailStatisType OBJECT-TYPE Represents the type of authentication failure with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.10.1.1 | INTEGER {invalidation(1), overtime(2), rejected(3), other(4)} | not-accessible | current |
| h3cDot11APAuthFailStatisCnt OBJECT-TYPE Represents the total number of each type for authentication failure on this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.10.1.2 | Counter32 | read-only | current |
| h3cDot11APAssocFailStatisTable OBJECT-TYPE The table will provide the association failure statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.11 | not-accessible | current | |
| h3cDot11APAssocFailStatisEntry OBJECT-TYPE Each entry of the table will provide the association failure statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.11.1 | not-accessible | current | |
| h3cDot11APAssocFailStatisType OBJECT-TYPE Represents the type of association failure with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.11.1.1 | INTEGER {invalidation(1), overtime(2), rejected(3), other(4)} | not-accessible | current |
| h3cDot11APAssocFailStatisCnt OBJECT-TYPE Represents the total number of each type for association failure on this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.11.1.2 | Counter32 | read-only | current |
| h3cDot11APReassocStatisTable OBJECT-TYPE The table will provide the re-association statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.12 | not-accessible | current | |
| h3cDot11APReassocStatisEntry OBJECT-TYPE Each entry of the table will provide the re-association statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.12.1 | not-accessible | current | |
| h3cDot11APReassocStatisType OBJECT-TYPE Represents the type of re-association with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.12.1.1 | INTEGER {total(1), success(2), invalidation(3), overtime(4), rejected(5), other(6)} | not-accessible | current |
| h3cDot11APReassocStatisCnt OBJECT-TYPE Represents the total number of each type for re-association with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.12.1.2 | Counter32 | read-only | current |
| h3cDot11APUserAuthStatisTable OBJECT-TYPE The table will provide the user authentication statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.13 | not-accessible | current | |
| h3cDot11APUserAuthStatisEntry OBJECT-TYPE Each entry of the table will provide the user authentication statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.13.1 | not-accessible | current | |
| h3cDot11UserAuthStatisType OBJECT-TYPE Represents the type of user authentication with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.13.1.1 | INTEGER {total(1), success(2), keyError(3), invalidation(4), overtime(5), rejected(6), other(7)} | not-accessible | current |
| h3cDot11UserAuthStatisCnt OBJECT-TYPE Represents the total number of each type for user authentication with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.13.1.2 | Counter32 | read-only | current |
| h3cDot11APDeauthStatisTable OBJECT-TYPE The table will provide the de-authentication statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.14 | not-accessible | current | |
| h3cDot11APDeauthStatisEntry OBJECT-TYPE Each entry of the table will provide the de-authentication statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.14.1 | not-accessible | current | |
| h3cDot11APDeauthStatisType OBJECT-TYPE Represents the type of de-authentication for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.14.1.1 | INTEGER {total(1), stationLeaving(2), shortResource(3), exception(4), other(5)} | not-accessible | current |
| h3cDot11APDeauthStatisCnt OBJECT-TYPE Represents the total number of each type for de-authentication with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.14.1.2 | Counter32 | read-only | current |
| h3cDot11APDeassocStatisTable OBJECT-TYPE The table will provide the de-association statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.15 | not-accessible | current | |
| h3cDot11APDeassocStatisEntry OBJECT-TYPE Each entry of the table will provide the de-association statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.15.1 | not-accessible | current | |
| h3cDot11APDeassocStatisType OBJECT-TYPE Represents the type of de-association with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.15.1.1 | INTEGER {total(1), stationLeaving(2), shortResource(3), exception(4), other(5)} | not-accessible | current |
| h3cDot11APDeassocStatisCnt OBJECT-TYPE Represents the total number of each type for de-association with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.15.1.2 | Counter32 | read-only | current |
| h3cDot11APAssocFailStatis2Table OBJECT-TYPE This table will provide statistic of association fails for each ap. | 1.3.6.1.4.1.2011.10.2.75.2.2.16 | not-accessible | current | |
| h3cDot11APAssocFailStatis2Entry OBJECT-TYPE Each entry will provide statistic of association fails for this ap. | 1.3.6.1.4.1.2011.10.2.75.2.2.16.1 | not-accessible | current | |
| h3cDot11APAssocFailStatis2Type OBJECT-TYPE Represents the type of association fails for this AP | 1.3.6.1.4.1.2011.10.2.75.2.2.16.1.1 | INTEGER {shortResource(1), notSupportRateSet(2), unknownReasonCode(3), other(4)} | not-accessible | current |
| h3cDot11APAssocFailStatis2Cnt OBJECT-TYPE Represents the total count of association fails for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.16.1.2 | Counter32 | read-only | current |
| h3cDot11APIfStatisTable OBJECT-TYPE The table will provide the statistics on the interface of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.17 | not-accessible | current | |
| h3cDot11APIfStatisEntry OBJECT-TYPE Each entry of the table will provide statistics on the interface of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1 | not-accessible | current | |
| h3cDot11APIfInPkts OBJECT-TYPE Represents the total number of packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.1 | Counter32 | read-only | current |
| h3cDot11APIfInNormalPkts OBJECT-TYPE Represents the total number of correct packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.2 | Counter32 | read-only | current |
| h3cDot11APIfInErrorPkts OBJECT-TYPE Represents the total number of error packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.3 | Counter32 | read-only | current |
| h3cDot11APIfOutPkts OBJECT-TYPE Represents the total number of packets sent from the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.4 | Counter32 | read-only | current |
| h3cDot11APIfInOctets OBJECT-TYPE Represents the total number of octets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.5 | Counter32 | read-only | current |
| h3cDot11APIfOutOctets OBJECT-TYPE Represents the total number of octets sent from the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.6 | Counter32 | read-only | current |
| h3cDot11APIfFlowOut OBJECT-TYPE Represents the traffic rate (byte/s) on the uplink interface during a sampling period. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.7 | Unsigned32 | read-only | current |
| h3cDot11APIfFlowIN OBJECT-TYPE Represents the traffic rate (byte/s) on the downlink interface during a sampling period. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.8 | Unsigned32 | read-only | current |
| h3cDot11APIfInUcastPkts OBJECT-TYPE Represents the number of unicast packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.9 | Counter32 | read-only | current |
| h3cDot11APIfInNUcastPkts OBJECT-TYPE Represents the number of non-unicast packets received on the wired interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.10 | Counter32 | read-only | current |
| h3cDot11APIfInDiscardPkts OBJECT-TYPE Represents the number of unicast packets discarded on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.11 | Counter32 | read-only | current |
| h3cDot11APIfOutUcastPkts OBJECT-TYPE Represents the number of unicast packets send on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.12 | Counter32 | read-only | current |
| h3cDot11APIfOutNUcastPkts OBJECT-TYPE Represents the number of non-unicast packets send on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.13 | Counter32 | read-only | current |
| h3cDot11APIfOutDiscardPkts OBJECT-TYPE Represents the number of discarded packets send on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.14 | Counter32 | read-only | current |
| h3cDot11APIfOutErrorPkts OBJECT-TYPE Represents the number of error packets send on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.15 | Counter32 | read-only | current |
| h3cDot11APIfUpdownTimes OBJECT-TYPE Represents the up/down times on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.16 | Counter32 | read-only | current |
| h3cDot11APIfStatusKeepTime OBJECT-TYPE Represents the last change time on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.17 | TimeTicks | read-only | current |
| h3cDot11APIfOperStatus OBJECT-TYPE Represents the operational state of the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.18 | INTEGER {up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)} | read-only | current |
| h3cDot11APIfInBrdcastPkts OBJECT-TYPE Represents the number of broadcast packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.19 | Counter64 | read-only | current |
| h3cDot11APIfOutBrdcastPkts OBJECT-TYPE Represents the number of broadcast packets sent on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.20 | Counter64 | read-only | current |
| h3cDot11APIfInMulcastPkts OBJECT-TYPE Represents the number of multicast packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.21 | Counter64 | read-only | current |
| h3cDot11APIfOutMulcastPkts OBJECT-TYPE Represents the number of multicast packets sent on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.22 | Counter64 | read-only | current |
| h3cDot11APIfInPayloadOctets OBJECT-TYPE Represents the number of actual octets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.23 | Counter64 | read-only | current |
| h3cDot11APIfOutPayloadOctets OBJECT-TYPE Represents the number of actual octets sent on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.17.1.24 | Counter64 | read-only | current |
| h3cDot11RadioMngFrmStatisTable OBJECT-TYPE The table will provide the management frame statistic of this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.18 | not-accessible | current | |
| h3cDot11RadioMngFrmStatisEntry OBJECT-TYPE Each entry of the table will provide the management frame statistic of this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.18.1 | not-accessible | current | |
| h3cDot11MngFrmType OBJECT-TYPE Represents the type of the management frame on this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.18.1.1 | INTEGER {assocReq(1), assocResp(2), reassocReq(3), reassocResp(4), probeReq(5), probeResp(6), beacon(7), atim(8), disassociation(9), authentication(10), deauthentication(11), action(12)} | not-accessible | current |
| h3cDot11MngFrmCnt OBJECT-TYPE Represents the total number of each type of management frame on this radio. | 1.3.6.1.4.1.2011.10.2.75.2.2.18.1.2 | Counter32 | read-only | current |
| h3cDot11APPacketSizeStatisTable OBJECT-TYPE This table provides packets statistic base on size. | 1.3.6.1.4.1.2011.10.2.75.2.2.19 | not-accessible | current | |
| h3cDot11APPacketSizeStatisEntry OBJECT-TYPE Each entry provides packets statistic base on size for each radio of a specific AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.19.1 | not-accessible | current | |
| h3cDot11APPacketSize OBJECT-TYPE This node represents packet size: sizeLevel1 : size <= 128 sizeLevel2 : 128 < size <= 512 sizeLevel3 : 512 < size <= 1024 sizeLevel4 : size > 1024 | 1.3.6.1.4.1.2011.10.2.75.2.2.19.1.1 | INTEGER {sizeLevel1(1), sizeLevel2(2), sizeLevel3(3), sizeLevel4(4)} | not-accessible | current |
| h3cDot11APRXPacketSizeCount OBJECT-TYPE Represents the count of packets reception base on frame size. | 1.3.6.1.4.1.2011.10.2.75.2.2.19.1.2 | Counter64 | read-only | current |
| h3cDot11APTXPacketSizeCount OBJECT-TYPE Represents the count of packets transmission base on frame size. | 1.3.6.1.4.1.2011.10.2.75.2.2.19.1.3 | Counter64 | read-only | current |
| h3cDot11APPacketRateStatisTable OBJECT-TYPE This table provides packets statistic base on rate. | 1.3.6.1.4.1.2011.10.2.75.2.2.20 | not-accessible | current | |
| h3cDot11APPacketRateStatisEntry OBJECT-TYPE Each entry provides packets statistic base on rate for each radio of a specific AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.20.1 | not-accessible | current | |
| h3cDot11APPacketRate OBJECT-TYPE Represents transmit data rate(twice as actual rate). | 1.3.6.1.4.1.2011.10.2.75.2.2.20.1.1 | Integer32 | not-accessible | current |
| h3cDot11APRXPacketRateCount OBJECT-TYPE Represents the count of packets reception base on transmit data rate. | 1.3.6.1.4.1.2011.10.2.75.2.2.20.1.2 | Counter64 | read-only | current |
| h3cDot11APTXPacketRateCount OBJECT-TYPE Represents the count of packets transmission base on transmit data rate. | 1.3.6.1.4.1.2011.10.2.75.2.2.20.1.3 | Counter64 | read-only | current |
| h3cDot11APPacketMCSRateStatisTable OBJECT-TYPE This table provides packets statistic base on MCS rate. | 1.3.6.1.4.1.2011.10.2.75.2.2.21 | not-accessible | current | |
| h3cDot11APPacketMCSRateStatisEntry OBJECT-TYPE Each entry provides packets statistic base on MCS rate for each radio of a specific AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.21.1 | not-accessible | current | |
| h3cDot11APPacketMCSRate OBJECT-TYPE Represents transmit data rate(twice as actual rate). | 1.3.6.1.4.1.2011.10.2.75.2.2.21.1.1 | Integer32 | not-accessible | current |
| h3cDot11APRXPacketMCSRateCount OBJECT-TYPE Represents the count of packets reception base on transmit data rate. | 1.3.6.1.4.1.2011.10.2.75.2.2.21.1.2 | Counter64 | read-only | current |
| h3cDot11APTXPacketMCSRateCount OBJECT-TYPE Represents the count of packets transmission base on transmit data rate. | 1.3.6.1.4.1.2011.10.2.75.2.2.21.1.3 | Counter64 | read-only | current |
| h3cDot11APAssocFailStatis3Table OBJECT-TYPE This table will provide statistic of association fails for each AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.22 | not-accessible | current | |
| h3cDot11APAssocFailStatis3Entry OBJECT-TYPE Each entry will provide statistic of association failure with this AP because of different reasons. | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1 | not-accessible | current | |
| h3cDot11APAssocFailStatis3SRCnt OBJECT-TYPE This object represents the count of association failure because of lack of resource. | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1.1 | Counter32 | read-only | current |
| h3cDot11APAssocFailStatis3NSRCnt OBJECT-TYPE This object represents the count of association failure because of not support rate set. | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1.2 | Counter32 | read-only | current |
| h3cDot11APAssocFailStatis3URCCnt OBJECT-TYPE This object represents the count of association failure because of unknown reason code. | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1.3 | Counter32 | read-only | current |
| h3cDot11APAssocFailStatis3RFCnt OBJECT-TYPE This object represents the count of association failure because of re-associate failed. | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1.4 | Counter32 | read-only | current |
| h3cDot11APAssocFailStatis3OtherCnt OBJECT-TYPE This object represents the count of association fails because of reason not in 802.11 the protocol. | 1.3.6.1.4.1.2011.10.2.75.2.2.22.1.5 | Counter32 | read-only | current |
| h3cDot11APIfStatisByAPIDTable OBJECT-TYPE The table will provide the statistics on the interface of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.23 | not-accessible | current | |
| h3cDot11APIfStatisByAPIDEntry OBJECT-TYPE Each entry of the table will provide statistics on the interface of the AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1 | not-accessible | current | |
| h3cDot11APIfInPkts2 OBJECT-TYPE Represents the total number of packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.1 | Counter64 | read-only | current |
| h3cDot11APIfInNormalPkts2 OBJECT-TYPE Represents the total number of correct packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.2 | Counter64 | read-only | current |
| h3cDot11APIfInErrorPkts2 OBJECT-TYPE Represents the total number of error packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.3 | Counter64 | read-only | current |
| h3cDot11APIfOutPkts2 OBJECT-TYPE Represents the total number of packets sent from the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.4 | Counter64 | read-only | current |
| h3cDot11APIfInOctets2 OBJECT-TYPE Represents the total number of octets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.5 | Counter64 | read-only | current |
| h3cDot11APIfOutOctets2 OBJECT-TYPE Represents the total number of octets sent from the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.6 | Counter64 | read-only | current |
| h3cDot11APIfFlowOut2 OBJECT-TYPE Represents the traffic rate (byte/s) on the uplink interface during a sampling period. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.7 | Unsigned32 | read-only | current |
| h3cDot11APIfFlowIN2 OBJECT-TYPE Represents the traffic rate (byte/s) on the downlink interface during a sampling period. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.8 | Unsigned32 | read-only | current |
| h3cDot11APIfInUcastPkts2 OBJECT-TYPE Represents the number of unicast packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.9 | Counter64 | read-only | current |
| h3cDot11APIfInNUcastPkts2 OBJECT-TYPE Represents the number of non-unicast packets received on the wired interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.10 | Counter64 | read-only | current |
| h3cDot11APIfInDiscardPkts2 OBJECT-TYPE Represents the number of unicast packets discarded on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.11 | Counter64 | read-only | current |
| h3cDot11APIfOutUcastPkts2 OBJECT-TYPE Represents the number of unicast packets send on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.12 | Counter64 | read-only | current |
| h3cDot11APIfOutNUcastPkts2 OBJECT-TYPE Represents the number of non-unicast packets send on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.13 | Counter64 | read-only | current |
| h3cDot11APIfOutDiscardPkts2 OBJECT-TYPE Represents the number of discarded packets send on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.14 | Counter64 | read-only | current |
| h3cDot11APIfOutErrorPkts2 OBJECT-TYPE Represents the number of error packets send on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.15 | Counter64 | read-only | current |
| h3cDot11APIfUpdownTimes2 OBJECT-TYPE Represents the up/down times on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.16 | Counter32 | read-only | current |
| h3cDot11APIfStatusKeepTime2 OBJECT-TYPE Represents the last change time on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.17 | TimeTicks | read-only | current |
| h3cDot11APIfOperStatus2 OBJECT-TYPE Represents the operational state of the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.18 | INTEGER {up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)} | read-only | current |
| h3cDot11APIfInBrdcastPkts2 OBJECT-TYPE Represents the number of broadcast packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.19 | Counter64 | read-only | current |
| h3cDot11APIfOutBrdcastPkts2 OBJECT-TYPE Represents the number of broadcast packets sent on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.20 | Counter64 | read-only | current |
| h3cDot11APIfInMulcastPkts2 OBJECT-TYPE Represents the number of multicast packets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.21 | Counter64 | read-only | current |
| h3cDot11APIfOutMulcastPkts2 OBJECT-TYPE Represents the number of multicast packets sent on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.22 | Counter64 | read-only | current |
| h3cDot11APIfInPayloadOctets2 OBJECT-TYPE Represents the number of actual octets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.23 | Counter64 | read-only | current |
| h3cDot11APIfOutPayloadOctets2 OBJECT-TYPE Represents the number of actual octets sent on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.24 | Counter64 | read-only | current |
| h3cDot11APIfInDataOctets2 OBJECT-TYPE Represents the number of actual data octets received on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.25 | Counter64 | read-only | current |
| h3cDot11APIfOutDataOctets2 OBJECT-TYPE Represents the number of actual data octets sent on the interface. | 1.3.6.1.4.1.2011.10.2.75.2.2.23.1.26 | Counter64 | read-only | current |
| h3cDot11APUserSecAuthStatisTable OBJECT-TYPE The table will provide the user authentication statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.24 | not-accessible | current | |
| h3cDot11APUserSecAuthStatisEntry OBJECT-TYPE Each entry of the table will provide the user authentication statistic for this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1 | not-accessible | current | |
| h3cDot11APUserAuthCurNumber OBJECT-TYPE Represents the current number of user authenticated with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.1 | Integer32 | read-only | current |
| h3cDot11APUserConnFailCnt OBJECT-TYPE Represents the total number of user disconnected with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.2 | Counter32 | read-only | current |
| h3cDot11APUserAuthReqCnt OBJECT-TYPE Represents the total number of user authenticate request with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.3 | Counter32 | read-only | current |
| h3cDot11APUserAuthSuccCnt OBJECT-TYPE Represents the total number of user authenticated successed with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.4 | Counter32 | read-only | current |
| h3cDot11APUserAuthFailCnt OBJECT-TYPE Represents the total number of user authenticated failed with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.5 | Counter32 | read-only | current |
| h3cDot11AllUserOnlineTime OBJECT-TYPE Represents the online time of all users authenticated successed with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.24.1.6 | TimeTicks | read-only | current |
| h3cDot11APUserInfoStatisTable OBJECT-TYPE The table will provide the user information statistic of this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.25 | not-accessible | current | |
| h3cDot11APUserInfoStatisEntry OBJECT-TYPE Each entry of the table will provide the user information statistic of this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1 | not-accessible | current | |
| h3cDot11APUserMacAddr OBJECT-TYPE Represents the mac address of user logging in this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1.1 | MacAddress | not-accessible | current |
| h3cDot11APUserIpAddr OBJECT-TYPE Represents the ip address of user logging in this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1.2 | IpAddress | read-only | current |
| h3cDot11APUserLoginName OBJECT-TYPE Represents the login name of user logging in this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1.3 | OCTET STRING | read-only | current |
| h3cDot11APUserLoginTime OBJECT-TYPE Represents the login time of user with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1.4 | OCTET STRING | read-only | current |
| h3cDot11APUserOnlineTime OBJECT-TYPE Represents the online time of user with this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.25.1.5 | TimeTicks | read-only | current |
| h3cDot11APReassocStatis2Table OBJECT-TYPE This table will provide statistic of reassociation for each AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.26 | not-accessible | current | |
| h3cDot11APReassocStatis2Entry OBJECT-TYPE Each entry will provide statistic of reassociation with this AP because of different reasons. | 1.3.6.1.4.1.2011.10.2.75.2.2.26.1 | not-accessible | current | |
| h3cDot11APReassocFailStatis2Cnt OBJECT-TYPE This object represents the count of reassociation failure because of lack of resource. | 1.3.6.1.4.1.2011.10.2.75.2.2.26.1.1 | Counter32 | read-only | current |
| h3cDot11TrafficTable OBJECT-TYPE The table describes user's traffic based on ssid | 1.3.6.1.4.1.2011.10.2.75.2.2.27 | not-accessible | current | |
| h3cDot11TrafficEntry OBJECT-TYPE Each entry contains the traffc information of a ssid. | 1.3.6.1.4.1.2011.10.2.75.2.2.27.1 | not-accessible | current | |
| h3cDot11SSIDIndex OBJECT-TYPE Represents the SSID. | 1.3.6.1.4.1.2011.10.2.75.2.2.27.1.1 | OCTET STRING | not-accessible | current |
| h3cDot11UpPacketNumber OBJECT-TYPE Represents the packet count of up link. | 1.3.6.1.4.1.2011.10.2.75.2.2.27.1.2 | Counter64 | read-only | current |
| h3cDot11UpByteNumber OBJECT-TYPE Represents the byte count of up link. | 1.3.6.1.4.1.2011.10.2.75.2.2.27.1.3 | Counter64 | read-only | current |
| h3cDot11DownPacketNumber OBJECT-TYPE Represents the packet count of down link. | 1.3.6.1.4.1.2011.10.2.75.2.2.27.1.4 | Counter64 | read-only | current |
| h3cDot11DownByteNumber OBJECT-TYPE Represents the byte count of down link. | 1.3.6.1.4.1.2011.10.2.75.2.2.27.1.5 | Counter64 | read-only | current |
| h3cDot11APEchoStatisTable OBJECT-TYPE The table will provide the Echo statistic of this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.28 | not-accessible | current | |
| h3cDot11APEchoInfoStatisEntry OBJECT-TYPE Each entry of the table will provide the Echo statistic of this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.28.1 | not-accessible | current | |
| h3cDot11APEchoAvgDelay OBJECT-TYPE This object represents the average time delay of heart beat in this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.28.1.1 | Integer32 | read-only | current |
| h3cDot11APEchoRequestCnt OBJECT-TYPE This object represents the count of echo request in this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.28.1.2 | Counter64 | read-only | current |
| h3cDot11APEchoRespLossCnt OBJECT-TYPE This object represents the loss count of echo response in this AP. | 1.3.6.1.4.1.2011.10.2.75.2.2.28.1.3 | Counter64 | read-only | current |
| h3cDot11APMtNotifyGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.75.2.3 | |||
| h3cDot11APMtTraps OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.75.2.3.0 | |||
| h3cDot11APMtTrapVarObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.75.2.3.1 | |||
| h3cDot11APMtTrapCfgErrReason OBJECT-TYPE Represents errors caused by configuration operation. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.1 | H3cDot11NotifyReasonType | accessible-for-notify | current |
| h3cDot11APMtTrapRadioFailReason OBJECT-TYPE Represents errors caused by configuration operation. The following values are supported: config(1) - Configuration error hwerror(2) - Hardware error swerror(3) - Software error radar(4) - Radar Detection unknown(8) - Unknown reason | 1.3.6.1.4.1.2011.10.2.75.2.3.1.2 | INTEGER {config(1), hwerror(2), swerror(3), radar(4), unknown(8)} | accessible-for-notify | current |
| h3cDot11APMtTrapOldChannel OBJECT-TYPE Represents which channel the radio used to use. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.3 | H3cDot11ChannelScopeType | accessible-for-notify | current |
| h3cDot11APMtTrapNewChannel OBJECT-TYPE Represents which channel the radio will use. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.4 | H3cDot11ChannelScopeType | accessible-for-notify | current |
| h3cDot11APChannelChgMode OBJECT-TYPE Represents the channel change mode for a radio. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.5 | H3cDot11RFModeType | accessible-for-notify | current |
| h3cDot11APChgWorkMode OBJECT-TYPE Represents what work mode for AP. The following values are supported: normal(1) - AP will supply WLAN service. monitor(2) - AP will be a monitor to detect attack. hybrid(3) - AP will supply WLAN service and detect attack. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.6 | INTEGER {normal(1), monitor(2), hybrid(3)} | accessible-for-notify | current |
| h3cDot11APIntfDevMACAddress OBJECT-TYPE Represents MAC address of the device which triggers the notification. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.7 | MacAddress | accessible-for-notify | current |
| h3cDot11APMtTrapOldIPAddr OBJECT-TYPE Represents the IP address of AP. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.8 | IpAddress | accessible-for-notify | current |
| h3cDot11CurrInterfDetectedNum OBJECT-TYPE Represents the number of interfere detected. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.9 | Integer32 | accessible-for-notify | current |
| h3cDot11StaFullReason OBJECT-TYPE Reports which kind maximum number of STA is reached. New STA is not able to associate. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.10 | INTEGER {ap(1), bss(2), radio(3), radioConcur(4), radiopolicy(5), ac(6), acConcur(7), aid(8)} | accessible-for-notify | current |
| h3cDot11StaLimitNumber OBJECT-TYPE Represents the limit number of STA. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.11 | Integer32 | accessible-for-notify | current |
| h3cDot11APRadioDownReason OBJECT-TYPE Reports the reason why WLAN links is interrupted. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.12 | INTEGER {phyicalUnusable(1), configDisable(2), operatinUnusable(3), apTunnelDown(4)} | accessible-for-notify | current |
| h3cDot11InterfMacList OBJECT-TYPE Represents MAC address list of interfere detected. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.13 | OCTET STRING | accessible-for-notify | current |
| h3cDot11APTrapUserCnt OBJECT-TYPE Represents the online user counter of AP. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.14 | Integer32 | accessible-for-notify | current |
| h3cDot11APTrapUserThreshold OBJECT-TYPE Represents threshold of AP's online user counter. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.15 | Integer32 | accessible-for-notify | current |
| h3cDot11APMtChanlChgCount OBJECT-TYPE Represents how many times that channel changed. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.16 | Integer32 | accessible-for-notify | current |
| h3cDot11APMtFormerApVersion OBJECT-TYPE Represents former software version of AP. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.17 | OCTET STRING | accessible-for-notify | current |
| h3cDot11APMtAPID OBJECT-TYPE To uniquely identify each AP. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.18 | H3cDot11ObjectIDType | accessible-for-notify | current |
| h3cDot11APMtRadioID OBJECT-TYPE Represents each radio. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.19 | H3cDot11RadioScopeType | accessible-for-notify | current |
| h3cDot11APMtChannel OBJECT-TYPE Represents the current channel allocation for radio. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.20 | H3cDot11ChannelScopeType | accessible-for-notify | current |
| h3cDot11APMtInterfMacAdd OBJECT-TYPE Represents the MAC address of an AP. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.21 | MacAddress | accessible-for-notify | current |
| h3cDot11APMtAdjChannel OBJECT-TYPE Represents the adjacent channel of radio. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.22 | H3cDot11ChannelScopeType | accessible-for-notify | current |
| h3cDot11APMtFirstTrapTime OBJECT-TYPE Represents the first trap time. | 1.3.6.1.4.1.2011.10.2.75.2.3.1.23 | TimeTicks | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| h3cDot11APMtWorkModeChgTrap NOTIFICATION-TYPE The notification will be sent when AP changes the work mode, and h3cDot11APWorkMode suggests which work mode will be used by AP. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.1 | current |
| h3cDot11APMtCfgErrorTrap NOTIFICATION-TYPE The notification will represent errors caused by the configuration operation of AP. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.2 | current |
| h3cDot11APMtRadioFailTrap NOTIFICATION-TYPE The notification will notify which the operational status of radio becomes down. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.3 | current |
| h3cDot11APMtRadioFailRecoverTrap NOTIFICATION-TYPE The notification will notify the operational status of which radio becomes up again. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.4 | current |
| h3cDot11APMtRdoChanlChgTrap NOTIFICATION-TYPE The notification will represent which radio changes the channel. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.5 | current |
| h3cDot11APMtTimeSynFail NOTIFICATION-TYPE The notification will be sent when AC and AP failed to synchronize their time. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.6 | current |
| h3cDot11APMtChlIntfDetected NOTIFICATION-TYPE The notification will be sent when some ambient device interferes with current channel. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.7 | current |
| h3cDot11APMtIntfAPDetected NOTIFICATION-TYPE The notification will be sent when some ambient AP interferes with current channel. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.8 | current |
| h3cDot11APMtIntfStaDetected NOTIFICATION-TYPE The notification will be sent when some ambient station interferes with current channel. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.9 | current |
| h3cDot11APMtIPChange NOTIFICATION-TYPE The notification will be sent when IP address of the AP changes. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.10 | current |
| h3cDot11APFlashWriteFailure NOTIFICATION-TYPE The notification will be sent when AP failed to write data into flash. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.11 | current |
| h3cDot11APSysReboot NOTIFICATION-TYPE The notification will be sent when AP reboots. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.12 | current |
| h3cDot11APMtAvailChlTooLow NOTIFICATION-TYPE The notification will be sent when number of available channels is too low. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.13 | current |
| h3cDot11APImgDwldSuccess NOTIFICATION-TYPE The notification will be sent when AP succeeds to download image from AC. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.14 | current |
| h3cDot11APInterfDetectedTrap NOTIFICATION-TYPE This notification will be sent when some ambient AP interferes with current channel. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.15 | current |
| h3cDot11APInterfClearTrap NOTIFICATION-TYPE This notification will be sent when interference caused by ambient APs on the current channel disappears. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.16 | current |
| h3cDot11StaInterfDetectedTrap NOTIFICATION-TYPE This notification will be sent when interference caused by ambient STAs on the current channel disappears. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.17 | current |
| h3cDot11StaInterfClearTrap NOTIFICATION-TYPE This notification will be sent when interference caused by ambient devices on the current channel happens. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.18 | current |
| h3cDot11OtherDevIntDetectedTrap NOTIFICATION-TYPE This notification will be sent when interference caused by ambient devices on the current channel disappears. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.19 | current |
| h3cDot11OtherDevIntClearTrap NOTIFICATION-TYPE This notification will be sent when previous ambient device disappeared with the same channel. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.20 | current |
| h3cDot11APModuleTroubleTrap NOTIFICATION-TYPE This notification will be sent when WLAN module failed. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.21 | current |
| h3cDot11APModuleTroubleClearTrap NOTIFICATION-TYPE The notification will be sent when WLAN module recovered. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.22 | current |
| h3cDot11APRadioDownTrap NOTIFICATION-TYPE This notification will be sent when WLAN links interrupted. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.23 | current |
| h3cDot11APRadioDownRecovTrap NOTIFICATION-TYPE This notification will be sent when WLAN links recover. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.24 | current |
| h3cDot11APStaFullTrap NOTIFICATION-TYPE This notification will be sent when STA number reach limit number. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.25 | current |
| h3cDot11APStaFullRecoverTrap NOTIFICATION-TYPE This notification will be sent when STA number recover enough level. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.26 | current |
| h3cDot11DFSFreeCntBelowThrRecov NOTIFICATION-TYPE This notification will be sent when available channels number recover enough level. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.27 | current |
| h3cDot11APCpuUsageHigh NOTIFICATION-TYPE The notification will be sent when the AP CPU usage exceeds the threshold. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.28 | current |
| h3cDot11APCpuUsageHighRecover NOTIFICATION-TYPE The notification will be sent when the AP CPU usage descends the threshold. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.29 | current |
| h3cDot11APMemUsageHigh NOTIFICATION-TYPE The notification will be sent when the AP memory usage exceeds the threshold. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.30 | current |
| h3cDot11APMemUsageHighRecover NOTIFICATION-TYPE The notification will be sent when the AP memory usage descends the threshold. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.31 | current |
| h3cDot11APTrapUserCntExceedThre NOTIFICATION-TYPE The notification will be sent when the online user counter exceeds the threshold. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.32 | current |
| h3cDot11APMtDetectedIntfAP NOTIFICATION-TYPE This notification will be sent when some ambient AP interferes with current channel. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.33 | current |
| h3cDot11APMtDetectedIntfSTA NOTIFICATION-TYPE This notification will be sent when some ambient STA interferes with current channel. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.34 | current |
| h3cDot11APMtDetectedIntfOtherDev NOTIFICATION-TYPE This notification will be sent when other device interferes with current channel. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.35 | current |
| h3cDot11DetcAdjChlIntfAP NOTIFICATION-TYPE This notification will be sent when some ambient AP interferes with adjacent channel. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.36 | current |
| h3cDot11DetcAdjChlIntfAPClear NOTIFICATION-TYPE This notification will be sent when interference caused by ambient APs on the adjacent channel disappears. | 1.3.6.1.4.1.2011.10.2.75.2.3.0.37 | current |