H3C-CONFIG-MAN-MIB
- Registered at
- 1.3.6.1.4.1.2011.10.2.4
- Last updated
- 2011-11-26 00:00
- Organization
- Hangzhou H3C Tech. Co., Ltd.
- Revisions
- 2011-11-26 00:00
- Namespace
- huawei
- Source file
H3C-CONFIG-MAN-MIB- Digest
sha256:241a4daf1d5f3c902eb91411cc6c5b42f60f6f2e269307910b98633f6adf7cdc
Description
This MIB contains objects to manage the system configuration. It contains the model used to represent configuration data that exists elsewhere in the system and in peripheral devices. There are no constraints on this MIB.
Contact
Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| HUAWEI-3COM-OID-MIB | h3cCommon |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
H3C-CONFIG-MAN-MIB HUAWEI-3COM-OID-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ConfigOperationStateType TEXTUAL-CONVENTION The status of the specified operation. opInProgress : Specified operation is active. opOperationSuccess : Specified operation is supported and completed successfully. opInvalidOperation : Command invalid or command/protocol/device combination unsupported. opInvalidProtocol : Invalid protocol specified. opInvalidSourceName : Invalid source file name specified. opInvalidDestName : Invalid target name specified. opInvalidServerAddress : Invalid server address specified. opDeviceBusy : Specified device is in use and locked by another process. opDeviceOpenError : Invalid device name. opDeviceError : Device read, write or erase error. opDeviceNotProgrammable : Device is read-only but a write or erase operation was specified. opDeviceFull : Device is filled to capacity. opFileOpenError : Invalid file name; file not found in partition. opFileTransferError : File transfer was unsuccessful; network failure. opFileChecksumError : File checksum in Flash failed. opNoMemory : System running low on memory. opAuthFail: Invalid user name or password. opTimeOut : File transfer was timeout. opUnknownFailure : Failure unknown. opInvalidConfigFile: Invalid configration file. opSlaveFull : Operation is fail for the slave don't have enough space. opCopyToSlaveFailure : Operation is fail when copy file to the slave. | current | |||
| ConfigOperationType TEXTUAL-CONVENTION Specify operation types on configuration. Currently, following types of operation are provided: running2Startup(1): Update the saved configuration (startup) file used currently with the current configuration running in the system. This operation is equivalent to the [save] command from command line. If current startup configuration file does not exist, then the default startup configuration file is created to save the data and this becomes the current startup configuration file. startup2Running(2): Update the current configuration running in the system with the saved configuration (startup) file used currently. The commands in the file are executed as if they had been entered via the command line. If the current startup configuration file does not exist, the operation will fail with the error opFileOpenError(13). running2Net(3): Send the current configuration running in the system to the network using the specified file transfer protocol. net2Running(4): Update the current configuration running in the system with a remote file from the network using the specified file transfer protocol. The commands in the file are executed as if they had been entered via the command line. net2Startup(5): Download a remote file to the local system using the specified file transfer protocol and replace the saved configuration (startup) file used currently. If current startup configurationfile does not exist, the default startup configuration file is created to save the data and this becomes the current startup configuration file. startup2Net(6): Send the saved configuration (startup) file used currently to the network using the specified file transfer protocol. If the current startup configuration file does not exist, the operation will fail with the error opFileOpenError(13). | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| h3cConfigManObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.4.1 | |||
| h3cCfgLog OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.4.1.1 | |||
| h3cCfgRunModifiedLast OBJECT-TYPE The object records the value of sysUpTime when the current configuration running in the system was last modified. The value will be changed immediately after system detects the current configuration has been changed. | 1.3.6.1.4.1.2011.10.2.4.1.1.1 | TimeTicks | read-only | current |
| h3cCfgRunSavedLast OBJECT-TYPE The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than h3cCfgRunModifiedLast, the current configuration has been modified but not saved. | 1.3.6.1.4.1.2011.10.2.4.1.1.2 | TimeTicks | read-only | current |
| h3cCfgStartModifiedLast OBJECT-TYPE The object records the value of sysUpTime when the saved configuration used currently was last modified. It may have been modified by a save of the current configuration running in the system or other methods such as copy. | 1.3.6.1.4.1.2011.10.2.4.1.1.3 | TimeTicks | read-only | current |
| h3cCfgLogLimitedEntries OBJECT-TYPE The object shows the maximum number of rows in h3cCfgLogTable. The value supported by the system is 10. | 1.3.6.1.4.1.2011.10.2.4.1.1.4 | Integer32 (0..2147483647) | read-only | current |
| h3cCfgLogDeletedEntries OBJECT-TYPE The total number of rows deleted from h3cCfgLogTable. | 1.3.6.1.4.1.2011.10.2.4.1.1.5 | Counter32 | read-only | current |
| h3cCfgLogWantBackup OBJECT-TYPE Decide whether to backup the value of objects about h3cCfgLog. | 1.3.6.1.4.1.2011.10.2.4.1.1.6 | TruthValue | read-write | current |
| h3cCfgLogTable OBJECT-TYPE Table for logging configuration operation in device. | 1.3.6.1.4.1.2011.10.2.4.1.1.7 | not-accessible | current | |
| h3cCfgLogEntry OBJECT-TYPE Information of the entry. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1 | not-accessible | current | |
| h3cCfgLogIndex OBJECT-TYPE Index of the table beginning from 1. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| h3cCfgLogTime OBJECT-TYPE Specify the sysUpTime when the config log was generated. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.2 | TimeTicks | read-only | current |
| h3cCfgLogSrcCmd OBJECT-TYPE Specify the source command which brought the log. Currently we provide the types of source: 1.cmdLine(1):configure log instigated by command line. 2.snmp(2):configure log instigated by snmp. 3.other(3):configure log instigated by other source unknown. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.3 | INTEGER {cmdLine(1), snmp(2), other(3)} | read-only | current |
| h3cCfgLogSrcData OBJECT-TYPE The source of the configuration data event. erase erasing destination runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.4 | INTEGER {erase(1), runningData(2), commandSource(3), startupData(4), local(5), netFtp(6), hotPlugging(7)} | read-only | current |
| h3cCfgLogDesData OBJECT-TYPE The destination for the configuration data event. unknown unknown runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.5 | INTEGER {unknown(1), runningData(2), commandSource(3), startupData(4), local(5), netFtp(6), hotPlugging(7)} | read-only | current |
| h3cCfgLogTerminalType OBJECT-TYPE Specifies the terminal type. If h3cCfgLogSrcCmd is not 'cmdLine', use 'notApplicable'. The value list: notApplicable(1): no meaning at this time. unknown(2): unknown terminal type. console(3): console interface. terminal(4): generic terminal. virtual(5): virtual terminal such as telnet. auxiliary(6): auxiliary interface. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.6 | INTEGER {notApplicable(1), unknown(2), console(3), terminal(4), virtual(5), auxiliary(6)} | read-only | current |
| h3cCfgLogTerminalUser OBJECT-TYPE The name of logging user which is available when h3cCfgLogSrcCmd is 'cmdLine'. Other, a zero length string. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.7 | DisplayString (SIZE(0..64)) | read-only | current |
| h3cCfgLogTerminalNum OBJECT-TYPE Specifies the terminal number. If h3cCfgLogSrcCmd is not 'cmdLine', use '-1' | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.8 | Integer32 | read-only | current |
| h3cCfgLogTerminalLocation OBJECT-TYPE The location of logging user which is available when h3cCfgLogSrcCmd is 'cmdLine'. Other, a zero length string. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.9 | DisplayString (SIZE(0..64)) | read-only | current |
| h3cCfgLogCmdSrcAddress OBJECT-TYPE The address from which a request comes when the value of h3cCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of h3cCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0. This object is replaced by for it only support IPv4. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.10 | IpAddress | read-only | deprecated |
| h3cCfgLogVirHost OBJECT-TYPE The host name of remote system connected if h3cCfgLogTerminalType has the value of 'virtual'. Other, a zero length string. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.11 | DisplayString (SIZE(0..64)) | read-only | current |
| h3cCfgLogUserName OBJECT-TYPE The user name used when h3cCfgLogSrcData or h3cCfgLogDesData has the value of 'netFtp'. Other, a zero length string. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.12 | DisplayString (SIZE(0..64)) | read-only | current |
| h3cCfgLogServerAddress OBJECT-TYPE The remote server address when h3cCfgLogSrcData or h3cCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0. This object is replaced by for it only support IPv4. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.13 | IpAddress | read-only | deprecated |
| h3cCfgLogFile OBJECT-TYPE The current configuration file name when h3cCfgLogSrcData has the value of 'netFtp',and h3cCfgLogDesData has the value of 'startupData'. Other, a zero length string. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.14 | DisplayString (SIZE(0..64)) | read-only | current |
| h3cCfgLogCmdSrcAddrType OBJECT-TYPE The type of IP address for the h3cCfgLogCmdSrcAddrRev. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.15 | InetAddressType | read-only | current |
| h3cCfgLogCmdSrcAddrRev OBJECT-TYPE The address from which a request comes when the value of h3cCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of h3cCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.16 | InetAddress | read-only | current |
| h3cCfgLogCmdSrcAddrVPNName OBJECT-TYPE The VPN instance of this operation uses. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.17 | DisplayString | read-only | current |
| h3cCfgLogServerAddrType OBJECT-TYPE The type of IP address for the h3cCfgLogServerAddrRev. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.18 | InetAddressType | read-only | current |
| h3cCfgLogServerAddrRev OBJECT-TYPE The remote server address when h3cCfgLogSrcData or h3cCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.19 | InetAddress | read-only | current |
| h3cCfgLogServerAddrVPNName OBJECT-TYPE The VPN instance of this operation uses. | 1.3.6.1.4.1.2011.10.2.4.1.1.7.1.20 | DisplayString | read-only | current |
| h3cCfgFirstTrapTime OBJECT-TYPE Represents the first trap time. | 1.3.6.1.4.1.2011.10.2.4.1.1.8 | TimeTicks | accessible-for-notify | current |
| h3cCfgOperate OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.4.1.2 | |||
| h3cCfgOperateGlobalEntryLimit OBJECT-TYPE The maximum number of copy entries that may be held in h3cCfgOperateTable. A particular setting does not guarantee that much data can be held. | 1.3.6.1.4.1.2011.10.2.4.1.2.1 | Integer32 (1..10) | read-only | current |
| h3cCfgOperateEntryAgeOutTime OBJECT-TYPE The number of minutes an unactive h3cCfgOperateEntry SHOULD be kept in the h3cCfgOperateTable before it is active. The object is a fator taken account of when it needs delete some rows make room in h3cCfgOperateTable. | 1.3.6.1.4.1.2011.10.2.4.1.2.2 | Integer32 (1..60) | read-write | current |
| h3cCfgOperateResultGlobalEntryLimit OBJECT-TYPE The maximum number of copy entries that may be held in h3cCfgOperateResultTable. A particular setting does not guarantee that much data can be held. | 1.3.6.1.4.1.2011.10.2.4.1.2.3 | Integer32 (1..50) | read-write | current |
| h3cCfgOperateTable OBJECT-TYPE A table of config-operation requests. | 1.3.6.1.4.1.2011.10.2.4.1.2.4 | not-accessible | current | |
| h3cCfgOperateEntry OBJECT-TYPE An operate request entry. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1 | not-accessible | current | |
| h3cCfgOperateIndex OBJECT-TYPE The unique index value of a row in this table. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| h3cCfgOperateType OBJECT-TYPE Specify the type of operation on configuration. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.2 | ConfigOperationType | read-create | current |
| h3cCfgOperateProtocol OBJECT-TYPE If the value of h3cCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this node specify the protocol to be used for file transfer . The default protocol is ftp if no protocol is specified. And for other value of h3cCfgOperateType , this object may be ignored by the implementation. when clusterftp or clustertftp is selected, the h3cCfgOperateServerAddress needn't be set, the server address can be acquired automatically, the value of h3cCfgOperateServerAddress is uncertain during operation. both member switch and commander switch can use them if they support HGMP v2. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.3 | INTEGER {ftp(1), tftp(2), clusterftp(3), clustertftp(4)} | read-create | current |
| h3cCfgOperateFileName OBJECT-TYPE When the object of h3cCfgOperateType has the value of net2Startup, net2running or running2Net,the value must be specified. The file name may include the path if applicable. If the value of h3cCfgOperateType is net2Startup or net2running, this node specify the source file name of transfers.If the value of h3cCfgOperateType is running2Net , this node specify the destination file name of transfers. When h3cCfgOperateType has the value of startup2net,the object may not be created instead of using the file name of startup configuration file. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.4 | DisplayString (SIZE(1..128)) | read-create | current |
| h3cCfgOperateServerAddress OBJECT-TYPE When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted. This object is replaced by h3cFlhOperSrvAddr for it only support IPv4. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.5 | IpAddress | read-create | deprecated |
| h3cCfgOperateUserName OBJECT-TYPE When the operation type is running2Net,net2Running,net2Startup or startup2net , the user name for the ftp server from/to which to download/upload should be specified. The object must be created if h3cCfgOperateProtocol has the value of ftp. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.6 | DisplayString (SIZE(0..40)) | read-create | current |
| h3cCfgOperateUserPassword OBJECT-TYPE When the operation type is running2Net,net2Running,net2Startup or startup2net , the user password for the ftp server from/to which to download/upload should be specified. The object must be created if h3cCfgOperateProtocol has the value of ftp. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.7 | DisplayString (SIZE(0..40)) | read-create | current |
| h3cCfgOperateEndNotificationSwitch OBJECT-TYPE Specifies whether or not a notification should be issued on the completion of the operation. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.8 | TruthValue | read-create | current |
| h3cCfgOperateRowStatus OBJECT-TYPE The status of this table entry. When the status is active all the object's value in the entry is not allowed to modified. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.9 | RowStatus | read-create | current |
| h3cCfgOperateServerPort OBJECT-TYPE When the operation type is running2Net, net2Running, net2Startup or startup2Net, this node is used for specifying the remote port number. If the value is 0 or not specified, the known port number will be used. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.10 | Integer32 (0..65535) | read-create | current |
| h3cCfgOperateSrvAddrType OBJECT-TYPE The type of IP address for h3cCfgOperateSrvAddrRev. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.11 | InetAddressType | read-create | current |
| h3cCfgOperateSrvAddrRev OBJECT-TYPE When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.12 | InetAddress | read-create | current |
| h3cCfgOperateSrvVPNName OBJECT-TYPE The VPN instance of this operation uses. | 1.3.6.1.4.1.2011.10.2.4.1.2.4.1.13 | DisplayString | read-create | current |
| h3cCfgOperateResultTable OBJECT-TYPE A table of config-operation requests result. | 1.3.6.1.4.1.2011.10.2.4.1.2.5 | not-accessible | current | |
| h3cCfgOperateResultEntry OBJECT-TYPE The result entries of configuration operation requests. | 1.3.6.1.4.1.2011.10.2.4.1.2.5.1 | not-accessible | current | |
| h3cCfgOperateResultIndex OBJECT-TYPE The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached. | 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| h3cCfgOperateResultOptIndex OBJECT-TYPE The operation index in the h3cCfgOperateTable. | 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.2 | Integer32 (1..2147483647) | read-only | current |
| h3cCfgOperateResultOpType OBJECT-TYPE The operation type in the h3cCfgOperateTable. | 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.3 | ConfigOperationType | read-only | current |
| h3cCfgOperateState OBJECT-TYPE The operation state type in the h3cCfgOperateTable. | 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.4 | ConfigOperationStateType | read-only | current |
| h3cCfgOperateTime OBJECT-TYPE Record the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes. | 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.5 | TimeTicks | read-only | current |
| h3cCfgOperateEndTime OBJECT-TYPE The value of sysUpTime when the configuration operation is finished. | 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.6 | TimeTicks | read-only | current |
| h3cCfgOperFailReason OBJECT-TYPE The failure reasons of configuration operation. | 1.3.6.1.4.1.2011.10.2.4.1.2.5.1.7 | DisplayString | read-only | current |
| h3cCfgExecuteOperate OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.4.1.2.6 | |||
| h3cCfgExecuteOperateResultEntryLimit OBJECT-TYPE The maximum number of ConfigOperationType entries that may be held in h3cCfgExecuteResultTable. A particular setting does not guarantee that much data can be held. | 1.3.6.1.4.1.2011.10.2.4.1.2.6.1 | Integer32 (5..20) | read-write | current |
| h3cCfgExecuteResultTable OBJECT-TYPE A table of configuration execute result. | 1.3.6.1.4.1.2011.10.2.4.1.2.6.2 | not-accessible | current | |
| h3cCfgExecuteResultEntry OBJECT-TYPE The result entries of configuration execute operation. | 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1 | not-accessible | current | |
| h3cCfgExecuteResultIndex OBJECT-TYPE The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached. | 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| h3cCfgExecuteResultOptIndex OBJECT-TYPE The configuration execute operation index in the h3cCfgExecuteResultTable. | 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.2 | Integer32 (1..2147483647) | read-only | current |
| h3cCfgExecuteResultOpType OBJECT-TYPE The operation type in the h3cCfgExecuteResultTable. | 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.3 | ConfigOperationType | read-only | current |
| h3cCfgExecuteState OBJECT-TYPE Record the status of the specified operation. | 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.4 | ConfigOperationStateType | read-only | current |
| h3cCfgExecuteTime OBJECT-TYPE Record the time of the execution starts. | 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.5 | TimeTicks | read-only | current |
| h3cCfgExecuteEndTime OBJECT-TYPE Record the time of the execution is finished. | 1.3.6.1.4.1.2011.10.2.4.1.2.6.2.1.6 | TimeTicks | read-only | current |
| h3cCfgReset OBJECT-TYPE Reboot device as default configuration. | 1.3.6.1.4.1.2011.10.2.4.1.2.7 | INTEGER {normal(1), reset(2)} | read-write | current |
| h3cConfigManNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.4.2 | |||
| h3cConfigManConformance OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.4.3 | |||
| h3cConfigManCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.4.3.1 | |||
| h3cConfigManGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2011.10.2.4.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| h3cCfgManEventlog NOTIFICATION-TYPE The object calculates the checksum on the current config per 10 minutes and even if it is different from the saved config but if a trap has been sent with the same checksum then don't send again until the checksum is different. | 1.3.6.1.4.1.2011.10.2.4.2.1 | current |
| h3cCfgOperateCompletion NOTIFICATION-TYPE When create h3cCfgOperateTable successfully, a notification may be generated. | 1.3.6.1.4.1.2011.10.2.4.2.2 | current |
| h3cCfgInvalidConfigFile NOTIFICATION-TYPE When the configuration file is invalid, this notification will be generated. | 1.3.6.1.4.1.2011.10.2.4.2.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| h3cConfigManCompliance MODULE-COMPLIANCE The statement of compliance for those implementing the Huawei 3Com ConfigMan MIB. | 1.3.6.1.4.1.2011.10.2.4.3.1.1 | current |
| h3cCfgManLogGroup OBJECT-GROUP A collection of objects configuration log group. | 1.3.6.1.4.1.2011.10.2.4.3.2.1 | current |
| h3cCfgOperateGroup OBJECT-GROUP A group of configuration operation. | 1.3.6.1.4.1.2011.10.2.4.3.2.2 | current |
| h3cCfgManNotificationGroup NOTIFICATION-GROUP Collection of notification objects. | 1.3.6.1.4.1.2011.10.2.4.3.2.3 | current |