MIBs Depot

GW-EPON-MIB

Registered at
1.3.6.1.4.1.10072.2.20
Last updated
2008-04-10 00:00
Organization
Organization
Revisions
2006-03-24 09:59
Namespace
gwd
Source file
GW-EPON-MIB
Digest
sha256:98cf7d67013f8154e577a95584bd21c8116c230a03812bbf8e07a919198c2f44

Description

EPON private MIB information definitions

Contact

Contact-info

Imports

FromSymbols
GWTT-SMIdevices
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

GW-EPON-MIB
GWTT-SMI
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
ChassisSlotBoardType
TEXTUAL-CONVENTION
The value indicates the type of this board: null(1) - NULL, unknown(2) - Unknown, sw(3) - SW (OLT), master control and switch board. epon(4) - EPON (OLT), slave epon board. gpon(5) - GPON (OLT), slave gpon board. get(6) - GET (OLT, 4GE-TX), using category 5 UTP interface. geo(7) - GEO (OLT, 4GE-XX), using X fiber over PMT interface. tdm(8) - TDM (OLT), slave tdm board. stm1(9) - STM1 (OLT), slave stm1 board. pwu48(10) - PWR48, power board with input of -48V(DC). pwu220(11) - PWR220, power board with input of 220V(AC). smb(12) - SMB (ONU), the simple mainboard of box device. gem(13) - GEM (OLT), slave board. sig(14) - SIG (OLT), slave board. onuEponB(15) - EPON-B (ONU). onu6FeC(16) - 6FE_C (ONU), RJ45 connector. onu8FeD(17) - 8FE_D (ONU), SCSI68 connector. onu16FeD(18) - 16FE_D (ONU), SCSI68 connector. onu8PotsA(19)- 8POTS-A (ONU), RJ11 connector. onu8PotsB(20)- 8POTS-B (ONU), RJ21 connector. onu8FxsA(21) - 8FXS-A (ONU), RJ11 connector. onu8FxsB(22) - 8FXS-B (ONU), RJ21 connector. oltMain(23) - the master board of box-device OLT. olt2Epon(24) - the EPON board of box-device OLT. E1 ( 25 ) - oltE1 ( 26 ) , onuE1A ( 27 ) , onuE1B ( 28 ) , sw_6900 ( 29 ) - SW (OLT), master control and switch board of GFA6900. olt4epon ( 30 ) - EPON (OLT) , PON board with 4 PON ports. olt8epon ( 31 ) - EPON (OLT) , PON board with 8 PON ports. olt12epon ( 32 ) - EPON (OLT) , PON board with 12 PON ports and 4 GE ports. gem4ge ( 33 ) - GEM (OLT) , GEM board with 4 GE ports. gem10ge ( 34 ) - GEM (OLT) , GEM board with 1 10GE port and 4 GE ports. fan_6900 ( 35 ) - FAN (OLT) , FAN board of GFA6900. pwu_48 ( 36 ) - PWU (OLT) , 48V Power board of GFA6900 and GFA6900M. pwu_220 ( 37 ) - PWU (OLT) , 220V Power board of GFA6900. olt4epon4ge(38) - EPON (OLT) , EPON board with 4 PON ports and 4 GE ports pwu_220_6900m(39) - PWU (OLT) , 220V Power board of GFA6900M. fan_6900s(40) - FAN (OLT) , FAN board of GFA6900S. pwu_48_6900s(41) - PWU (OLT) , 48V Power board of GFA6900S. pwu_220_6900s(42) - PWU (OLT) , 220V Power board of GFA6900S.
current
ChassisSlotSupportType
TEXTUAL-CONVENTION
The value indicates the type of board this slot surpports.
current
EponDeviceType
TEXTUAL-CONVENTION
The value indicates the type of this device: 1 - unknown, 2 - GFA6700, 3 - GFA6100, 4 - GT811, 5 - GT831, 6 - GT831-CATV, 7 - GT812, 8 - GT813, 9 - GT881, 10 - GT861, 11 - GT891, 12 - GT810, 13 - GT863, 14 - other, 15 - GT865, 16 - GT816, 17 - GT811A, 18 - GT812A, 19 - GT831A, 20 - GT831A-CATV, 21 - GT815, 22 - GT812B, 23 - GT831B, 24 - GT866, 25 - GT811_B, 26 - GT851, 27 - GT813_B, 28 - GT862, 29 - GT892, 30 - GT835, 31 - GT831_B_CATV, 32 - GT815_B, 33 - GT871, 34 - GT871R, 35 - GD5048, 36 - GD6024, 37 - GT872, 38 - GT872P, --GT872B(deprecated) 39 - GT872R, 40 - GT873, 41 - GT873P, 42 - GT873R, 43 - GT871P, 44 - GT870, 45 - GT811_C, 46 - GT810_A, 47 - GT811_D, 96 - GFA6900M, 97 - GGA6900S, 99 - GFA6900
current
OnuAlarmLevelList
TEXTUAL-CONVENTION
Each octet within this value specifies a alarm-level of one ONU of a PON, with the first octet specifying ONU1 alarm-level, and the second octet specifying ONU2 alarm-level, etc. Per octet value is defined: '0' - null '1' - vital '2' - major '3' - minor '4' - warning '5' - clear '6' - information '7' - off-line.
current
OnuList
TEXTUAL-CONVENTION
Each octet within this value specifies a set of eight ONUs, with the first octet specifying ONUs ID 1 through 8, the second octet specifying ONUs ID 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered ONU ID, and the least significant bit represents the highest numbered ONU ID. Thus, each ONU of a PON is represented by a single bit within the value of this object. If the bit has a value of '1', then the ONU is registered and included in this list; if the bit has a value of '0', then the ONU is disregistered and not included.
current

Objects

NameOIDSyntaxAccessStatus
gwEponMibObjects
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1
gwEponCfgGroup
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1.1
gwEponDevice
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1.1.1
gwEponDevTable
OBJECT-TYPE
Table of device informations
1.3.6.1.4.1.10072.2.20.1.1.1.1not-accessiblecurrent
gwEponDevEntry
OBJECT-TYPE
An entry in the table, containing properties and some descriptions
1.3.6.1.4.1.10072.2.20.1.1.1.1.1not-accessiblecurrent
deviceIndex
OBJECT-TYPE
Index of device
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.1Integer32read-onlycurrent
deviceType
OBJECT-TYPE
The value indicates the type of this device
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.2EponDeviceTyperead-onlycurrent
deviceName
OBJECT-TYPE
A string indicates or configure device name
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.3DisplayStringread-writecurrent
deviceDescription
OBJECT-TYPE
Description for this device
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.4DisplayString (SIZE(0..255))read-writecurrent
deviceLocation
OBJECT-TYPE
A string indicates and configure the device location
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.5DisplayString (SIZE(0..255))read-writecurrent
deviceVendor
OBJECT-TYPE
A string indicates the vendor
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.6DisplayString (SIZE(0..255))read-onlycurrent
deviceFirmWareVersion
OBJECT-TYPE
The value indicates the version of firmware
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.7DisplayString (SIZE(20))read-onlycurrent
deviceSoftWareVersion
OBJECT-TYPE
The value indicates the version of software
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.8DisplayString (SIZE(20))read-onlycurrent
deviceHardWareVersion
OBJECT-TYPE
The value indicates the version of PCB
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.9DisplayString (SIZE(20))read-onlycurrent
deviceOperStatus
OBJECT-TYPE
The current operational state of the device, 'down(2)' indicates that the ONU is off-line. 'dormant(4)' indicates the device is waiting for external actions (such as no bandwidth for any service), 'powerDown(5)' indicates the device is power down or dying gasp.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.10INTEGER {up(1), down(2), unknown(3), dormant(4), powerDown(5)}read-onlycurrent
deviceAlarmStatus
OBJECT-TYPE
The value indicates alarm status for this device, it means unique alarm occur that unique bit is set '1', on the other hand, unique bit is set 0 while this alarm is cleared.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.11INTEGER {vital(1), major(2), minor(3), warning(4), clear(5)}read-onlycurrent
deviceMacAddress
OBJECT-TYPE
The value indicates and confgure device MAC address
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.12MacAddress (SIZE(6))read-writecurrent
deviceLastChange
OBJECT-TYPE
the last time for this device change
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.15TimeTicksread-onlycurrent
deviceReset
OBJECT-TYPE
Description
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.16INTEGER {noop(1), reset(2)}read-writecurrent
deviceEntLogicalIndex
OBJECT-TYPE
The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are are not necessarily contiguous.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.17Integer32 (1..2147483647)read-onlycurrent
deviceEntLogicalCommunity
OBJECT-TYPE
An SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read- write community string. However, the agent must take care not to return a community string which allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities represented by the same value of entLogicalCommunity have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2C, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent, or no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents which implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object, or may continue to return a community string (e.g., tri-lingual agent support).
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.18DisplayString (SIZE(1..20))read-onlycurrent
deviceOnuTestDistance
OBJECT-TYPE
the distance between OLT and unique ONU, unit:meter
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.19Integer32read-onlycurrent
deviceUpTime
OBJECT-TYPE
The value of this object uniquely identifies up time about this device.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.20TimeTicksread-onlycurrent
deviceStpEnable
OBJECT-TYPE
OLT or ONU spanning tree contral, enable(1)- enable the spanning tree protocol, disable(2)- disable the spanning tree protocol.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.21INTEGER {enable(1), disable(2)}read-writecurrent
deviceChipsetVendor
OBJECT-TYPE
PON chipset vendor ID
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.22DisplayStringread-onlycurrent
deviceChipsetMode
OBJECT-TYPE
PON chipset type
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.23Integer32read-onlycurrent
deviceChipsetRevision
OBJECT-TYPE
PON chipset revision
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.24DisplayStringread-onlycurrent
deviceChipsetDate
OBJECT-TYPE
PON chipset design date
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.25DisplayStringread-onlycurrent
deviceCapPortDesc
OBJECT-TYPE
Port capabilities description, include GE/FE/E1/POTS etc.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.26DisplayStringread-onlycurrent
deviceCapEthPortNum
OBJECT-TYPE
Number of ethernet port supported
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.27Integer32read-onlycurrent
deviceCapIadPotsPortNum
OBJECT-TYPE
Number of POTS port of IAD supported
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.28Integer32read-onlycurrent
deviceCapE1PortNum
OBJECT-TYPE
Number of E1 port supported
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.29Integer32read-onlycurrent
deviceCapUQueueTotal
OBJECT-TYPE
Number of upstream queues
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.30Integer32read-onlycurrent
deviceCapUQueuePort
OBJECT-TYPE
Maximum queues per port upstream
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.31Integer32read-onlycurrent
deviceCapDQueueTotal
OBJECT-TYPE
Number of downstream queues
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.32Integer32read-onlycurrent
deviceCapDQueuePort
OBJECT-TYPE
Maximum queues per port downstream
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.33Integer32read-onlycurrent
deviceCapBattery
OBJECT-TYPE
Battery Backup
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.34INTEGER {enable(1), disable(2)}read-onlycurrent
deviceMulticastSwitch
OBJECT-TYPE
ONU multicast switch
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.35INTEGER {snooping(1), ctc(2)}read-writecurrent
deviceSystemTime
OBJECT-TYPE
Current system clock-time. OCTET-STRING consisting of eleven octets whose contents are defined by RFC2579.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.36DateAndTimeread-writecurrent
deviceRestartupTime
OBJECT-TYPE
The time of device(OLT or ONU) restartup-time. OCTET-STRING consisting of eleven octets whose contents are defined by RFC2579.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.37DateAndTimeread-onlycurrent
deviceTrafficServiceStatus
OBJECT-TYPE
ONU traffic service state. 'enable(1)' indicates the traffic is in-service. 'disable(2)' indicates the traffic is out of service, but is still registered.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.38INTEGER {enable(1), disable(2)}read-writecurrent
deviceAlarmMask
OBJECT-TYPE
.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.39Bits {power(0), fan(1), cpu(2), temperature(3), register(4), present(5), ethlink(6), ethfer(7), ethflr(8), ethti(9), ethloop(10), ponber(11), ponfer(12), ponabnormal(13), ponaps(14), ponlink(15), onuLaserAlwayOn(16), onuOpticalPowerLow(17), onuOpticalPowerHigh(18), ponLOS(19)}read-writecurrent
deviceModel
OBJECT-TYPE
.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.40DisplayString (SIZE(1..32))read-onlycurrent
deviceMulticastFastLeaveAbility
OBJECT-TYPE
Fast Leave Mode: If the bit value of 'ctc(0)' is 0, the mode is CTC and non-fast-leave function, if the bit value of 'ctc(0)' is 1, the mode is CTC and fast-leave function; If the bit value of 'snooping(1)' is 0, the mode is snooping and non-fast-leave function, If the bit value of 'snooping(1)' is 1, the mode is snooping and fast-leave function.
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.41Bits {ctc(0), snooping(1)}read-onlycurrent
deviceMulticastFastLeaveOperState
OBJECT-TYPE
Fast Leave Function is active or deactive
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.42INTEGER {active(1), deactive(2)}read-onlycurrent
deviceMulticastFastLeaveAdminState
OBJECT-TYPE
active or deactivate Fast Leave Function
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.43INTEGER {active(1), deactive(2)}read-writecurrent
onuMacTableAlarmThreshold
OBJECT-TYPE
onu MAC table alarm threshold
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.44Integer32read-writecurrent
onuMacNumbers
OBJECT-TYPE
show onu actual mac number
1.3.6.1.4.1.10072.2.20.1.1.1.1.1.45Integer32read-onlycurrent
gwEponBoard
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1.1.2
gwEponBoardTable
OBJECT-TYPE
table of board informations
1.3.6.1.4.1.10072.2.20.1.1.2.1not-accessiblecurrent
gwEponBoardEntry
OBJECT-TYPE
An entry in the table, containig status and configrue information about boards
1.3.6.1.4.1.10072.2.20.1.1.2.1.1not-accessiblecurrent
boardIndex
OBJECT-TYPE
index of boards in unique device which is specified by 'deviceIndex'
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.1Integer32read-onlycurrent
curBoardType
OBJECT-TYPE
The value indicates the type of this board.
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.2ChassisSlotBoardTyperead-onlycurrent
boardDescription
OBJECT-TYPE
The value indicates and confgure board description
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.3DisplayString (SIZE(0..255))read-writecurrent
boardActMode
OBJECT-TYPE
The value indicates acting mode of unique board
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.4INTEGER {master-active(1), master-redundancy(2), slave(3), unknown(4)}read-onlycurrent
boardOperStatus
OBJECT-TYPE
The Value indicates board operating status
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.5INTEGER {null(1), initing(2), upgrating(3), running(4), exception(5)}read-onlycurrent
boardAlarmLevel
OBJECT-TYPE
The value indicates alarm level for unique board
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.6INTEGER {vital(1), major(2), minor(3), warning(4), noAlarm(5)}read-onlycurrent
boardLastChangeTime
OBJECT-TYPE
the time of last change about this board
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.7TimeTicksread-onlycurrent
boardSupprotType
OBJECT-TYPE
The value indicates the type of board this slot surpports.
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.8ChassisSlotSupportTyperead-onlycurrent
boardReset
OBJECT-TYPE
The value of this object determines whether reset this board. 'noop(1)' - only read value. 'reset(2)' - only write value, if the active master board is resetted, and another master board is running, then, the two boards will be switchover.
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.9INTEGER {noop(1), reset(2)}read-writecurrent
boardTemperature
OBJECT-TYPE
The value indicates the temperature of this board
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.10Integer32read-onlycurrent
boardEntLogicalIndex
OBJECT-TYPE
The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are are not necessarily contiguous.
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.11Integer32 (1..2147483647)read-onlycurrent
boardEntLogicalCommunity
OBJECT-TYPE
An SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read- write community string. However, the agent must take care not to return a community string which allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities represented by the same value of entLogicalCommunity have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2C, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent, or no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents which implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object, or may continue to return a community string (e.g., tri-lingual agent support).
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.12DisplayString (SIZE(1..20))read-onlycurrent
boardSoftwareVersion
OBJECT-TYPE
the value indicates the version of software
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.13DisplayString (SIZE(1..20))read-onlycurrent
boardFirmwareVersion
OBJECT-TYPE
the value indicates the version of firmware
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.14DisplayString (SIZE(1..20))read-onlycurrent
boardBootVersion
OBJECT-TYPE
Boot Version
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.15DisplayString (SIZE(1..20))read-onlycurrent
boardHardwareVersion
OBJECT-TYPE
Hardware Version
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.16DisplayString (SIZE(1..20))read-onlycurrent
boardManufactureDate
OBJECT-TYPE
Manufacture Date
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.17DisplayString (SIZE(1..20))read-onlycurrent
boardSerialNo
OBJECT-TYPE
Manufacture Serial No
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.18DisplayString (SIZE(1..20))read-onlycurrent
boardCpuUsage
OBJECT-TYPE
The percentage of CPU usage
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.19Integer32read-onlycurrent
boardMemoryUsage
OBJECT-TYPE
The percentage of used memory
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.20Integer32read-onlycurrent
boardHasSnmpAgent
OBJECT-TYPE
the object indicates whether there is a SNMP agent running on this board.
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.21INTEGER {notpresent(0), snmpv1(1), snmpv2c(2), snmpv3(3)}read-onlycurrent
boardSnmpAgentIpAddr
OBJECT-TYPE
this object indicates and configure IP address of SNMP agent running on this board. now, only GT861's IAD boards surpport this function.
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.22IpAddressread-writecurrent
boardSnmpAgentReadCommunity
OBJECT-TYPE
the object indicates and configure the read-only community of SNMP agent running on the board. now, only GT861's IAD boards surpport this function.
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.23DisplayString (SIZE(0..16))read-writecurrent
boardSnmpAgentWriteCommunity
OBJECT-TYPE
the object indicates and configure the read-write community of SNMP agent running on the board. now, only GT861's IAD boards surpport this function.
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.24DisplayString (SIZE(0..16))read-writecurrent
boardTemperatureHighThresholds
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.25Integer32read-writecurrent
boardCpuUsageThresholds
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.26Integer32read-writecurrent
boardMemoryUsageThresholds
OBJECT-TYPE
The percentage of used memory
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.27Integer32read-writecurrent
boardMemorySize
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.28Integer32read-onlycurrent
boardTemperatureLowThresholds
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.29Integer32read-writecurrent
boardAdminStatus
OBJECT-TYPE
The desired state of the board.
1.3.6.1.4.1.10072.2.20.1.1.2.1.1.30INTEGER {up(1), down(2)}read-writecurrent
gwEponPon
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1.1.3
ponPortTable
OBJECT-TYPE
table of pon port informations
1.3.6.1.4.1.10072.2.20.1.1.3.1not-accessiblecurrent
ponPortEntry
OBJECT-TYPE
An entry in the table, containing status and configure information about pon port
1.3.6.1.4.1.10072.2.20.1.1.3.1.1not-accessiblecurrent
ponPortIndex
OBJECT-TYPE
index of pon port
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.1Integer32 (1..2147483647)read-onlycurrent
ponPortIfIndex
OBJECT-TYPE
The value equipped to the index of this pon port in the IF-MIB
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.2Integer32 (1..2147483647)read-onlycurrent
ponPortDot1dBasePort
OBJECT-TYPE
port id in the bridge, equipped to the value in the bridge 'dot1dBasePort'
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.3Integer32 (1..65536)read-onlycurrent
ponPortPartnerDev
OBJECT-TYPE
index of the device which contains parter pon port
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.4Integer32read-onlycurrent
ponPortPartnerBrd
OBJECT-TYPE
index of board which contains parter pon port
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.5Integer32read-onlycurrent
ponPortPartnerPort
OBJECT-TYPE
partnet physical pon port index
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.6Integer32read-onlycurrent
ponPortProtectionDev
OBJECT-TYPE
PON Automatic Protection Switching, index of device
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.7Integer32read-writecurrent
ponPortProtectionBrd
OBJECT-TYPE
PON Automatic Protection Switching, index of board
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.8Integer32read-writecurrent
ponPortProtectionPort
OBJECT-TYPE
PON Automatic Protection Switching, index of pon port
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.9Integer32read-writecurrent
ponPortType
OBJECT-TYPE
type of pon port
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.10INTEGER {eponMauType1000BasePXOLT(1), eponMauType1000BasePXONU(2), eponMauType1000BasePX10DOLT(3), eponMauType1000BasePX10DONU(4), eponMauType1000BasePX10UOLT(5), eponMauType1000BasePX10UONU(6), eponMauType1000BasePX20DOLT(7), eponMauType1000BasePX20DONU(8), eponMauType1000BasePX20UOLT(9), eponMauType1000BasePX20UONU(10)}read-onlycurrent
ponPortMaxOnu
OBJECT-TYPE
The max number of supported ONUs in this PON port.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.11Integer32 (1..2147483647)read-onlycurrent
ponPortCurrOnu
OBJECT-TYPE
The current number of registered ONUs in this PON port.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.12Integer32 (0..64)read-onlycurrent
ponPortOperStatus
OBJECT-TYPE
operation status of unique pon port
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.13INTEGER {up(1), down(2), unknown(3), loop(4)}read-onlycurrent
ponPortAlarmStatus
OBJECT-TYPE
PON port alarm status, it indicates an alarm with bit=1, if all bit is 0, indicates no alarm.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.14Bits {ber(0), fer(1), abnormal(2), aps(3), link(4), onuLaserAlwaysOn(5), onuOpticalPowerLow(6), onuOpticalPowerHigh(7), ponLOS(8)}read-onlycurrent
ponPortAlarmMask
OBJECT-TYPE
PON Port Alarm mask, the bit=1 indicates mask.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.15Bits {ber(0), fer(1), abnormal(2), aps(3), link(4), onuLaserAlwaysOn(5), onuOpticalPowerLow(6), onuOpticalPowerHigh(7), ponLOS(8)}read-writecurrent
ponPortMaxBW
OBJECT-TYPE
The max bandwidth supported, unit:KB.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.16Integer32 (0..1000000)read-onlycurrent
ponPortActBW
OBJECT-TYPE
the actual bandwidth, unit:KB.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.17Integer32 (0..2147483647)read-onlycurrent
ponPortRemainBW
OBJECT-TYPE
The current available bandwidth, unit:KB.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.18Integer32 (0..1000000)read-onlycurrent
ponPortApsCtrl
OBJECT-TYPE
PON automatic-protection-switching control.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.19INTEGER {disable(1), auto(2), force(3)}read-writecurrent
ponPortApsStatus
OBJECT-TYPE
PON automatic-protection-switching status.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.20INTEGER {unknown(1), active(2), passive(3)}read-onlycurrent
ponPortEncryptSet
OBJECT-TYPE
Encryption set according to every ONU, this value is ignored when the pon port belongs to OLT.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.21INTEGER {pure(1), downstreamonly(2), bidirectional(3)}read-writecurrent
ponPortOnuLpbCtrl
OBJECT-TYPE
ONU Loopback Control, 'noop(1)' is no operation, i.e. the current status is idle; 'lpbStart(2)' is start loopback, only when the object value is 'noop', it can be configurated 'lpbStart(2)', otherwise forbidden, and if success, its value become 'inProcess(4)'; 'lpbStop(3)' is stop loopback, only when the object value is 'inProcess(4)', it can be configurated 'lpbStop(3)', and if success, its value become 'noop(1)'; 'inProcess(4)' is loopbacking status now.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.22INTEGER {noop(1), lpbStart(2), lpbStop(3), inProcess(4)}read-writecurrent
ponPortOnuLpbSource
OBJECT-TYPE
Loopback Data Source, 'internal' indicates internal data source, to use testing the link up or down, like ping function; 'external' indicates external data source, to use testing the bandwidth of the ONU ethernet.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.23INTEGER {internal(1), external(2)}read-writecurrent
ponPortOnuLpbTime
OBJECT-TYPE
Loopback Timeout, if the object value is 0, indicate the loopback is processing at all time, if the value is none 0, indicate the loopback time from begin to end, when the time is end it will be auto-stopped. unit:second.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.24Integer32 (0..2147483647)read-writecurrent
ponPortOnuLpbTxFrms
OBJECT-TYPE
The number of frames transmit by this ONU Logical Link.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.25Counter32read-onlycurrent
ponPortOnuLpbRxFrms
OBJECT-TYPE
The number of frames transmit by this ONU Logical Link.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.26Counter32read-onlycurrent
ponEntLogicalIndex
OBJECT-TYPE
The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are are not necessarily contiguous.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.27Integer32 (1..2147483647)read-onlycurrent
ponEntLogicalCommunity
OBJECT-TYPE
An SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read- write community string. However, the agent must take care not to return a community string which allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities represented by the same value of entLogicalCommunity have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2C, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent, or no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents which implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object, or may continue to return a community string (e.g., tri-lingual agent support).
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.28DisplayString (SIZE(1..20))read-onlycurrent
ponPortLinkedOnuCounter
OBJECT-TYPE
The current number of linked ONUs in this PON port.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.29Integer32 (0..64)read-onlycurrent
ponPortAdminStatus
OBJECT-TYPE
The desired state of the PON port.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.30INTEGER {up(1), down(2)}read-writecurrent
ponPortReset
OBJECT-TYPE
PON interface reset.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.31INTEGER {noop(1), reset(2)}read-writecurrent
ponPortWindowRange
OBJECT-TYPE
The max window range of ONU register.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.32INTEGER {disable(1), wr20km(2), wr40km(3), wr60km(4)}read-writecurrent
ponPortDownlinkPolicingEbl
OBJECT-TYPE
Config onu downlink-policer enable
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.33INTEGER {enable(1), disable(2)}read-writecurrent
ponPortAllOnuAlmLevel
OBJECT-TYPE
All ONUs alarm-level list.
1.3.6.1.4.1.10072.2.20.1.1.3.1.1.34OnuAlarmLevelListread-onlycurrent
ponOnuMapTable
OBJECT-TYPE
table of pon-ONU map
1.3.6.1.4.1.10072.2.20.1.1.3.2not-accessiblecurrent
ponOnuMapEntry
OBJECT-TYPE
An entry in the table
1.3.6.1.4.1.10072.2.20.1.1.3.2.1not-accessiblecurrent
mappingOnuIndex
OBJECT-TYPE
index of mapping onu
1.3.6.1.4.1.10072.2.20.1.1.3.2.1.1Integer32 (1..64)read-onlycurrent
onuDevIndex
OBJECT-TYPE
device index of this ONU
1.3.6.1.4.1.10072.2.20.1.1.3.2.1.2Integer32 (1..2147483647)read-onlycurrent
onuName
OBJECT-TYPE
device name of this ONU
1.3.6.1.4.1.10072.2.20.1.1.3.2.1.3DisplayString (SIZE(255))read-onlycurrent
ponPerfMonTable
OBJECT-TYPE
Table of pon performence
1.3.6.1.4.1.10072.2.20.1.1.3.3not-accessiblecurrent
ponPerfMonEntry
OBJECT-TYPE
An entry in the table, containing pon performence monitor information .
1.3.6.1.4.1.10072.2.20.1.1.3.3.1not-accessiblecurrent
ponPerfBER
OBJECT-TYPE
byte error rate of specified pon port upstream, UNIT: 10E-6
1.3.6.1.4.1.10072.2.20.1.1.3.3.1.1Counter32read-onlycurrent
ponPerfFER
OBJECT-TYPE
frame error rate of specified pon port downstream, UNIT: 10E-6
1.3.6.1.4.1.10072.2.20.1.1.3.3.1.4Counter32read-onlycurrent
ponPerfBerAlmEnable
OBJECT-TYPE
The value indicates whether enable pon performence BER alarm
1.3.6.1.4.1.10072.2.20.1.1.3.3.1.5INTEGER {enable(1), disable(2)}read-writecurrent
ponPerfFerAlmEnable
OBJECT-TYPE
The value indicates whether enable pon performence FER alarm
1.3.6.1.4.1.10072.2.20.1.1.3.3.1.6INTEGER {enable(1), disable(2)}read-writecurrent
ponPerfUpBandwidth
OBJECT-TYPE
the value indicates upstream bandwidth on this port
1.3.6.1.4.1.10072.2.20.1.1.3.3.1.7Counter32read-onlycurrent
ponPerfDownBandwidth
OBJECT-TYPE
the value indicates downstream bandwidth on this port
1.3.6.1.4.1.10072.2.20.1.1.3.3.1.8Counter32read-onlycurrent
ponHisCtrlTable
OBJECT-TYPE
Table of pon performence
1.3.6.1.4.1.10072.2.20.1.1.3.4not-accessiblecurrent
ponHisCtrlEntry
OBJECT-TYPE
An entry in the table, containing pon performence monitor information .
1.3.6.1.4.1.10072.2.20.1.1.3.4.1not-accessiblecurrent
ponHis15MinuteEnable
OBJECT-TYPE
The value indicates whether enable history statistic with interval 15 minutes
1.3.6.1.4.1.10072.2.20.1.1.3.4.1.1INTEGER {enable(1), disable(2)}read-writecurrent
ponHis24HourEnable
OBJECT-TYPE
The value indicates whether enable history statistic with interval 24 hours
1.3.6.1.4.1.10072.2.20.1.1.3.4.1.2INTEGER {enable(1), disable(2)}read-writecurrent
ponBERThreashold
OBJECT-TYPE
Ber measurement threshold, the value defination: 0=1e-0=1, 1=1e-1=0.1,......
1.3.6.1.4.1.10072.2.20.1.1.3.5Integer32 (0..8)read-writecurrent
ponFERThreashold
OBJECT-TYPE
Fer measurement threshold, the value defination: 0=1.00e-0=1, 1=1.00e-1=0.1,......
1.3.6.1.4.1.10072.2.20.1.1.3.6Integer32 (0..10)read-writecurrent
gwEponPonCtcExt
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1.1.3.7
gwEponPonCtcExtOamDiscoveryTiming
OBJECT-TYPE
extended oam discovery timing, unit: ms
1.3.6.1.4.1.10072.2.20.1.1.3.7.1Integer32 (0..2550)read-writecurrent
gwEponPonCtcExtOamCtcOui
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.3.7.2DisplayString (SIZE(16))read-writecurrent
gwEponPonCtcExtOamCtcVer
OBJECT-TYPE
CTC ext-oam version
1.3.6.1.4.1.10072.2.20.1.1.3.7.3Integer32 (1..255)read-writecurrent
gwEponPonCtcEncrypUpdKeyTime
OBJECT-TYPE
Update key time, unit: s
1.3.6.1.4.1.10072.2.20.1.1.3.7.4Integer32 (0..255)read-writecurrent
gwEponPonCtcEncrypNoReplyTimeout
OBJECT-TYPE
No reply timeout, unit: ms
1.3.6.1.4.1.10072.2.20.1.1.3.7.5Integer32 (0..2550)read-writecurrent
gwEponPonCtcEncrypTimingThreshold
OBJECT-TYPE
Encryption timing threshold
1.3.6.1.4.1.10072.2.20.1.1.3.7.6Integer32read-writecurrent
gwEponPonOnuAuth
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1.1.4
onuAuthEnable
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.1INTEGER {disable(1), auth_new_only(2), auth_all(3)}read-writedeprecated
onuAuthTable
OBJECT-TYPE
The table of ONU authentication based MAC address.
1.3.6.1.4.1.10072.2.20.1.1.4.2not-accessiblecurrent
onuAuthEntry
OBJECT-TYPE
An entry in the table
1.3.6.1.4.1.10072.2.20.1.1.4.2.1not-accessiblecurrent
eponBoardIndex
OBJECT-TYPE
The epon board index
1.3.6.1.4.1.10072.2.20.1.1.4.2.1.1Integer32read-onlycurrent
eponPonPortIndex
OBJECT-TYPE
PON port index
1.3.6.1.4.1.10072.2.20.1.1.4.2.1.2Integer32read-onlycurrent
onuAuthIndex
OBJECT-TYPE
MAC address index
1.3.6.1.4.1.10072.2.20.1.1.4.2.1.3Integer32read-onlycurrent
onuAuthMacAddress
OBJECT-TYPE
MAC address
1.3.6.1.4.1.10072.2.20.1.1.4.2.1.4MacAddressread-createcurrent
onuAuthRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.10072.2.20.1.1.4.2.1.5RowStatusread-createcurrent
onuToPonBindingEnable
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.3INTEGER {enable(1), disable(2)}read-writecurrent
onuAuthModeTable
OBJECT-TYPE
The table of ONU authentication Mode.
1.3.6.1.4.1.10072.2.20.1.1.4.4not-accessiblecurrent
onuAuthModeEntry
OBJECT-TYPE
An entry in the table
1.3.6.1.4.1.10072.2.20.1.1.4.4.1not-accessiblecurrent
onuAuthModeBrdIdx
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.4.1.1Integer32read-onlycurrent
onuAuthModePonIdx
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.4.1.2Integer32read-onlycurrent
onuAuthMode
OBJECT-TYPE
'macAddr(1)' : based ONU MAC address. 'loid(2)' : based ONU logical ID. 'hybrid(3)' : based both macAddr and loid. 'loidNoPwd(4) : based loid, but not check password. 'hybridNoPwd(5)' : based hybrid, but not check password.
1.3.6.1.4.1.10072.2.20.1.1.4.4.1.3INTEGER {macAddr(1), loid(2), hybrid(3), loidNoPwd(4), hybridNoPwd(5), disable(6)}read-writecurrent
onuAuthEnableForPon
OBJECT-TYPE
Description
1.3.6.1.4.1.10072.2.20.1.1.4.4.1.4INTEGER {disable(1), auth_new_only(2), auth_all(3)}read-writecurrent
onuAuthEntryReorganize
OBJECT-TYPE
For PonPort
1.3.6.1.4.1.10072.2.20.1.1.4.4.1.5INTEGER {organize(1)}read-writecurrent
onuAuthLoidTable
OBJECT-TYPE
The table of ONU authentication based LOID(Logical ONU ID).
1.3.6.1.4.1.10072.2.20.1.1.4.5not-accessiblecurrent
onuAuthLoidEntry
OBJECT-TYPE
An entry in the table
1.3.6.1.4.1.10072.2.20.1.1.4.5.1not-accessiblecurrent
onuAuthLoidBrdIdx
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.5.1.1Integer32read-onlycurrent
onuAuthLoidPonIdx
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.5.1.2Integer32read-onlycurrent
onuAuthLoidIdx
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.5.1.3Integer32 (1..128)read-onlycurrent
onuAuthLoid
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.5.1.4DisplayString (SIZE(24))read-createcurrent
onuAuthLoidPassword
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.5.1.5DisplayString (SIZE(12))read-createcurrent
onuAuthLoidDevIdx
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.5.1.6Integer32read-createcurrent
onuAuthLoidRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.10072.2.20.1.1.4.5.1.7RowStatusread-createcurrent
onuUnauthenticatedTable
OBJECT-TYPE
The table of unauthenticated ONUs based MAC address.
1.3.6.1.4.1.10072.2.20.1.1.4.6not-accessiblecurrent
onuUnauthenticatedEntry
OBJECT-TYPE
An entry in the table
1.3.6.1.4.1.10072.2.20.1.1.4.6.1not-accessiblecurrent
eponUnauthenticatedBoardIndex
OBJECT-TYPE
The epon board index
1.3.6.1.4.1.10072.2.20.1.1.4.6.1.1Integer32read-onlycurrent
eponUnauthenticatedPonPortIndex
OBJECT-TYPE
PON port index
1.3.6.1.4.1.10072.2.20.1.1.4.6.1.2Integer32read-onlycurrent
onuUnauthenticatedIndex
OBJECT-TYPE
MAC address index
1.3.6.1.4.1.10072.2.20.1.1.4.6.1.3Integer32read-onlycurrent
onuUnauthenticatedMacAddress
OBJECT-TYPE
MAC address
1.3.6.1.4.1.10072.2.20.1.1.4.6.1.4MacAddressread-onlycurrent
onuAuthEntryReorganizeForAll
OBJECT-TYPE
1.3.6.1.4.1.10072.2.20.1.1.4.9INTEGER {organize(1)}read-writecurrent
gwEponLlid
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1.1.5
ponLlidTable
OBJECT-TYPE
Table of the pon llid information
1.3.6.1.4.1.10072.2.20.1.1.5.1not-accessiblecurrent
ponLlidEntry
OBJECT-TYPE
An entry in the table, containing status or configure information
1.3.6.1.4.1.10072.2.20.1.1.5.1.1not-accessiblecurrent
ponLlidIndex
OBJECT-TYPE
The pon logic link index
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.1Integer32read-onlycurrent
ponLlidType
OBJECT-TYPE
type of pon logic link
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.2INTEGER {unkown(0), ethlink(1)}read-onlycurrent
ponLlidOltBoard
OBJECT-TYPE
The value equals to entPhysicalIndex in ENTITY-MIB
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.3Integer32read-createcurrent
ponLlidOltPort
OBJECT-TYPE
the pon port id
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.4Integer32read-createcurrent
ponLlidOltPortIfIndex
OBJECT-TYPE
ifIndex of the olt port
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.5Integer32read-createcurrent
ponLlidOnuPortIfIndex
OBJECT-TYPE
ifIndex of the onu port
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.6Integer32read-createcurrent
ponLlidOnuBoard
OBJECT-TYPE
The value indicates board id for this LLID
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.7Integer32read-createcurrent
ponLlidOnuPort
OBJECT-TYPE
The value indicates onu port for this LLID
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.8Integer32read-createcurrent
ponLlidLLID
OBJECT-TYPE
the vlaue of LLID
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.9Integer32 (1..2147483647)read-onlyobsolete
ponLlidIfIndex
OBJECT-TYPE
The value equals to ''ifIndex'' in IF-MIB according this object'
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.10Integer32 (1..2147483647)read-onlycurrent
ponLlidUpFixedBW
OBJECT-TYPE
upstream fixed bandwidth about this pon port, unit:KBps
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.11Integer32 (0..1000000)read-createcurrent
ponLlidDownFixedBW
OBJECT-TYPE
upstream fixed bandwidth about this pon port, unit:KBps, not support
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.12Integer32 (0..1000000)read-writeobsolete
ponLlidDesc
OBJECT-TYPE
description of the LLID
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.13DisplayStringread-createcurrent
ponLlidSurportMacNum
OBJECT-TYPE
The value of maximum MAC addresses
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.14Integer32 (0..8192)read-createdeprecated
ponLlidOnuMacAddress
OBJECT-TYPE
The value indicates and confgure onu MAC address
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.15MacAddress (SIZE(6))read-createcurrent
ponLlidRowStatus
OBJECT-TYPE
row status of this entry
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.16RowStatusread-createcurrent
ponLlidUpBWClass
OBJECT-TYPE
upstream class level for this pon port bandwidth allocation
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.17Integer32 (0..7)read-createcurrent
ponLlidUpDelay
OBJECT-TYPE
upstream delay level for this pon port bandwidth allocation
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.18INTEGER {low(1), high(2)}read-writedeprecated
ponLlidUpAssuredBW
OBJECT-TYPE
upstream assured bandwidth about this pon port, unit:KBps
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.19Integer32 (64..1000000)read-createcurrent
ponLlidUpBesteffortBW
OBJECT-TYPE
upstream best-effort bandwidth about this pon port, unit:KBps
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.20Integer32 (64..1000000)read-createcurrent
ponLlidDownBWClass
OBJECT-TYPE
upstream class level for this pon port bandwidth allocation
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.21Integer32 (0..7)read-writeobsolete
ponLlidDownDelay
OBJECT-TYPE
upstream delay level for this pon port bandwidth allocation
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.22INTEGER {low(1), high(2)}read-writeobsolete
ponLlidDownAssuredBW
OBJECT-TYPE
downstream assured bandwidth about this pon port, unit:KBps
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.23Integer32 (64..1000000)read-createcurrent
ponLlidDownBesteffortBW
OBJECT-TYPE
downstream best-effort bandwidth about this pon port, unit:KBps
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.24Integer32 (64..1000000)read-writeobsolete
ponLlidCtcFecAbility
OBJECT-TYPE
FEC ability
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.25INTEGER {unknown(1), supported(2), notSupported(3)}read-onlycurrent
ponLlidCtcFecMode
OBJECT-TYPE
FEC mode, unknown(1)-initializing, true state not yet known. enable(2)-activate FEC. disable(3)-deactivate FEC.
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.26INTEGER {unknown(1), enable(2), disable(3)}read-writecurrent
ponLlidCtcEncrypCtrl
OBJECT-TYPE
CTC encryption control
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.27INTEGER {enable(1), disable(2)}read-writecurrent
ponLlidCtcDbaQueSetNum
OBJECT-TYPE
DBA queue set number
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.28Integer32 (1..8)read-writecurrent
ponLlidCtcDbaQueSetCfgStatus
OBJECT-TYPE
The Queue sets configuration status, this object value is always 'noop(1)' when read, 'get(2)' will refresh the object of ponLlidCtcDbaQueSetNum and the table of ponLlidCtcDbaQueSetTable, 'set(3)' will config the data, include ponLlidCtcDbaQueSetNum and ponLlidCtcDbaQueSetTable. 'get(2)' and 'set(3) are only write value.
1.3.6.1.4.1.10072.2.20.1.1.5.1.1.29INTEGER {noop(1), get(2), set(3)}read-writecurrent
ponLlidCtcDbaQueSetTable
OBJECT-TYPE
Table of the pon llid DBA information
1.3.6.1.4.1.10072.2.20.1.1.5.2not-accessiblecurrent
ponLlidCtcDbaQueSetEntry
OBJECT-TYPE
CTC DBA entry
1.3.6.1.4.1.10072.2.20.1.1.5.2.1not-accessiblecurrent
ponLlidCtcDbaQueSetIndex
OBJECT-TYPE
The DBA queue-sets index
1.3.6.1.4.1.10072.2.20.1.1.5.2.1.1Integer32read-onlycurrent
ponLlidCtcDbaReportBitmap
OBJECT-TYPE
bit=0 - queue x report is not present, bit=1 - queue x report is present
1.3.6.1.4.1.10072.2.20.1.1.5.2.1.2Bits {queue0(0), queue1(1), queue2(2), queue3(3), queue4(4), queue5(5), queue6(6), queue7(7)}read-writecurrent
ponLlidCtcDbaQueue0Threshold
OBJECT-TYPE
Queue0 threshold
1.3.6.1.4.1.10072.2.20.1.1.5.2.1.3Integer32 (0..65535)read-writecurrent
ponLlidCtcDbaQueue1Threshold
OBJECT-TYPE
Queue1 threshold
1.3.6.1.4.1.10072.2.20.1.1.5.2.1.4Integer32 (0..65535)read-writecurrent
ponLlidCtcDbaQueue2Threshold
OBJECT-TYPE
Queue2 threshold
1.3.6.1.4.1.10072.2.20.1.1.5.2.1.5Integer32 (0..65535)read-writecurrent
ponLlidCtcDbaQueue3Threshold
OBJECT-TYPE
Queue3 threshold
1.3.6.1.4.1.10072.2.20.1.1.5.2.1.6Integer32 (0..65535)read-writecurrent
ponLlidCtcDbaQueue4Threshold
OBJECT-TYPE
Queue4 threshold
1.3.6.1.4.1.10072.2.20.1.1.5.2.1.7Integer32 (0..65535)read-writecurrent
ponLlidCtcDbaQueue5Threshold
OBJECT-TYPE
Queue5 threshold
1.3.6.1.4.1.10072.2.20.1.1.5.2.1.8Integer32 (0..65535)read-writecurrent
ponLlidCtcDbaQueue6Threshold
OBJECT-TYPE
Queue6 threshold
1.3.6.1.4.1.10072.2.20.1.1.5.2.1.9Integer32 (0..65535)read-writecurrent
ponLlidCtcDbaQueue7Threshold
OBJECT-TYPE
Queue7 threshold
1.3.6.1.4.1.10072.2.20.1.1.5.2.1.10Integer32 (0..65535)read-writecurrent
gwDevTrapGroup
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1.1.6
gwAlarmLevelGroup
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1.1.7
onuNotPresentAlmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.1Integer32 (1..4)read-writecurrent
devPowerOffAlmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.2Integer32 (1..4)read-writecurrent
ponPortBERAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.3Integer32 (1..4)read-writecurrent
ponPortFERAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.4Integer32 (1..4)read-writecurrent
llidActBWExceedingAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.5Integer32 (1..4)read-writecurrent
powerOffAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.6Integer32 (1..4)read-writecurrent
boardTemperatureHighAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.7Integer32 (1..4)read-writecurrent
devBoardPullAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.8Integer32 (1..4)read-writecurrent
ethLinkdownAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.9Integer32 (1..4)read-writecurrent
devFanAlarmAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.10Integer32 (1..4)read-writecurrent
ethFlrAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.11Integer32 (1..4)read-writecurrent
ethFerAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.12Integer32 (1..4)read-writecurrent
ethTransmittalIntermitAlarmLevel
OBJECT-TYPE
the value indicates an alarm level is set on this event
1.3.6.1.4.1.10072.2.20.1.1.7.13Integer32 (1..4)read-writecurrent
gwConsoleCfgGroup
OBJECT-IDENTITY
1.3.6.1.4.1.10072.2.20.1.1.8
gwConsoleBaudRate
OBJECT-TYPE
the baud rate for the system console
1.3.6.1.4.1.10072.2.20.1.1.8.1INTEGER {b300(1), b600(2), b1200(3), b2400(4), b4800(5), b9600(6), b19200(7), b38400(8), b115200(9), b230400(10)}read-writecurrent
gwConsoleDataBits
OBJECT-TYPE
the data bits length for the system console
1.3.6.1.4.1.10072.2.20.1.1.8.2INTEGER {b5(5), b6(6), b7(7), b8(8)}read-writecurrent
gwConsoleStopBitSet
OBJECT-TYPE
the stop bits for the system console
1.3.6.1.4.1.10072.2.20.1.1.8.3INTEGER {sb1(1), sb2(2)}read-writecurrent
gwConsoleParitySet
OBJECT-TYPE
the parity set for the system console
1.3.6.1.4.1.10072.2.20.1.1.8.4INTEGER {none(1), even(2), odd(3), space(4)}read-writecurrent
gwConsoleFlowCtrlSet
OBJECT-TYPE
the flow control set for the system console
1.3.6.1.4.1.10072.2.20.1.1.8.5INTEGER {enable(1), disable(2)}read-writecurrent

Notifications

NameOIDStatus
onuNewRegSuccess
NOTIFICATION-TYPE
A new ONU register success.
1.3.6.1.4.1.10072.2.20.1.1.6.1current
onuReregSuccess
NOTIFICATION-TYPE
An ONU reregister success.
1.3.6.1.4.1.10072.2.20.1.1.6.2current
onuNotPresent
NOTIFICATION-TYPE
An ONU is not present alarm
1.3.6.1.4.1.10072.2.20.1.1.6.3current
devPowerOff
NOTIFICATION-TYPE
device Power Off Alarm
1.3.6.1.4.1.10072.2.20.1.1.6.4current
devPowerOn
NOTIFICATION-TYPE
device Power On Alarm
1.3.6.1.4.1.10072.2.20.1.1.6.5current
cfgDataSaveSuccess
NOTIFICATION-TYPE
saving config data to flash successfully
1.3.6.1.4.1.10072.2.20.1.1.6.6current
cfgDataSaveFail
NOTIFICATION-TYPE
saving config data to flash unsuccessfully
1.3.6.1.4.1.10072.2.20.1.1.6.7current
flashClearSuccess
NOTIFICATION-TYPE
clear config data successfully
1.3.6.1.4.1.10072.2.20.1.1.6.8current
flashClearFail
NOTIFICATION-TYPE
clear config data unsuccessfully
1.3.6.1.4.1.10072.2.20.1.1.6.9current
softwareUpdateSuccess
NOTIFICATION-TYPE
update software successfully
1.3.6.1.4.1.10072.2.20.1.1.6.10current
softwareUpdateFail
NOTIFICATION-TYPE
update software unsuccessfully
1.3.6.1.4.1.10072.2.20.1.1.6.11current
firmwareUpdateSuccess
NOTIFICATION-TYPE
firmware update successfully
1.3.6.1.4.1.10072.2.20.1.1.6.12current
firmwareUpdateFail
NOTIFICATION-TYPE
update firmware unsuccessfully
1.3.6.1.4.1.10072.2.20.1.1.6.13current
cfgDataBackupSuccess
NOTIFICATION-TYPE
backup configuration data to NMS successfully.
1.3.6.1.4.1.10072.2.20.1.1.6.14current
cfgDataBackupFail
NOTIFICATION-TYPE
backup configuration data to NMS unsuccessfully.
1.3.6.1.4.1.10072.2.20.1.1.6.15current
cfgDataRestoreSuccess
NOTIFICATION-TYPE
restore configuration data from NMS successfully.
1.3.6.1.4.1.10072.2.20.1.1.6.16current
cfgDataRestoreFail
NOTIFICATION-TYPE
restore configuration data from NMS unsuccessfully.
1.3.6.1.4.1.10072.2.20.1.1.6.17current
autoProtectSwitch
NOTIFICATION-TYPE
Auto Protect Switch(APS) occurs
1.3.6.1.4.1.10072.2.20.1.1.6.18current
cpuUsageFactorHigh
NOTIFICATION-TYPE
high cpu usage factor alarm
1.3.6.1.4.1.10072.2.20.1.1.6.19current
ponPortBERAlarm
NOTIFICATION-TYPE
pon port BER alarm
1.3.6.1.4.1.10072.2.20.1.1.6.20current
ponPortBERAlarmClear
NOTIFICATION-TYPE
pon port BER alarm clear
1.3.6.1.4.1.10072.2.20.1.1.6.21current
ponPortFERAlarm
NOTIFICATION-TYPE
pon port FER alarm
1.3.6.1.4.1.10072.2.20.1.1.6.22current
ponPortFERAlarmClear
NOTIFICATION-TYPE
pon port FER alarm clear
1.3.6.1.4.1.10072.2.20.1.1.6.23current
llidActBWExceeding
NOTIFICATION-TYPE
llid bandwidth exceed the limit
1.3.6.1.4.1.10072.2.20.1.1.6.24current
llidActBWExceedingClear
NOTIFICATION-TYPE
llid bandwidth return to appropriate value
1.3.6.1.4.1.10072.2.20.1.1.6.25current
devBoardInterted
NOTIFICATION-TYPE
insert a board
1.3.6.1.4.1.10072.2.20.1.1.6.26current
devBoardPull
NOTIFICATION-TYPE
pull a board out
1.3.6.1.4.1.10072.2.20.1.1.6.27current
powerOffAlarm
NOTIFICATION-TYPE
power OFF alarm
1.3.6.1.4.1.10072.2.20.1.1.6.30current
powerOnAlarm
NOTIFICATION-TYPE
power ON alarm
1.3.6.1.4.1.10072.2.20.1.1.6.31current
boardTemperatureHigh
NOTIFICATION-TYPE
board temperature high alarm
1.3.6.1.4.1.10072.2.20.1.1.6.32current
boardTemperatureHighClear
NOTIFICATION-TYPE
board temperature high alarm clear
1.3.6.1.4.1.10072.2.20.1.1.6.33current
ponBoardReset
NOTIFICATION-TYPE
PON board reset event occur
1.3.6.1.4.1.10072.2.20.1.1.6.34current
swBoardProtectedSwitch
NOTIFICATION-TYPE
sw board protected switch event occur
1.3.6.1.4.1.10072.2.20.1.1.6.35current
ponPortAbnormal
NOTIFICATION-TYPE
abnormal status on PON port occur
1.3.6.1.4.1.10072.2.20.1.1.6.36current
onuRegisterConflict
NOTIFICATION-TYPE
onu register conflict
1.3.6.1.4.1.10072.2.20.1.1.6.37current
firmwareLoadSuccess
NOTIFICATION-TYPE
firmware load successfully
1.3.6.1.4.1.10072.2.20.1.1.6.38current
firmwareLoadFailure
NOTIFICATION-TYPE
firmware load fail
1.3.6.1.4.1.10072.2.20.1.1.6.39current
dbaUpdateSuccess
NOTIFICATION-TYPE
update dba successfully
1.3.6.1.4.1.10072.2.20.1.1.6.40current
dbaUpdateFailure
NOTIFICATION-TYPE
update dba faul
1.3.6.1.4.1.10072.2.20.1.1.6.41current
dbaLoadSuccess
NOTIFICATION-TYPE
load dba successfully
1.3.6.1.4.1.10072.2.20.1.1.6.42current
dbaLoadFailure
NOTIFICATION-TYPE
load dba fail
1.3.6.1.4.1.10072.2.20.1.1.6.43current
ponToEthLinkdown
NOTIFICATION-TYPE
.
1.3.6.1.4.1.10072.2.20.1.1.6.44current
ponToEthLinkup
NOTIFICATION-TYPE
.
1.3.6.1.4.1.10072.2.20.1.1.6.45current
onuSoftwareLoadSuccess
NOTIFICATION-TYPE
load onu software successfully
1.3.6.1.4.1.10072.2.20.1.1.6.46current
onuSoftwareLoadFailure
NOTIFICATION-TYPE
load onu software fail
1.3.6.1.4.1.10072.2.20.1.1.6.47current
ethLinkdown
NOTIFICATION-TYPE
Ethernet port linkdown alarm.
1.3.6.1.4.1.10072.2.20.1.1.6.54current
ethLinkup
NOTIFICATION-TYPE
Ethernet port linkup alarm.
1.3.6.1.4.1.10072.2.20.1.1.6.55current
bootUpdateSuccess
NOTIFICATION-TYPE
boot firmware update successfully notification
1.3.6.1.4.1.10072.2.20.1.1.6.56current
bootUpdateFailure
NOTIFICATION-TYPE
boot firmware update fail notification
1.3.6.1.4.1.10072.2.20.1.1.6.57current
batFileBackupSuccess
NOTIFICATION-TYPE
bat file backup successfully notification
1.3.6.1.4.1.10072.2.20.1.1.6.58current
batFileBackupFailure
NOTIFICATION-TYPE
bat file backup fail notification
1.3.6.1.4.1.10072.2.20.1.1.6.59current
batFileRestoreSuccess
NOTIFICATION-TYPE
bat file restore successfully notification
1.3.6.1.4.1.10072.2.20.1.1.6.60current
batFileRestoreFailure
NOTIFICATION-TYPE
bat file restore fail notification
1.3.6.1.4.1.10072.2.20.1.1.6.61current
onuRegAuthFailure
NOTIFICATION-TYPE
Illegal ONU register.
1.3.6.1.4.1.10072.2.20.1.1.6.62current
deviceColdStart
NOTIFICATION-TYPE
Only report OLT cold start. this trap is not sent if a devPowerOn trap is sent for the same restart. Implementation of this trap is optional.
1.3.6.1.4.1.10072.2.20.1.1.6.63current
deviceWarmStart
NOTIFICATION-TYPE
Only report OLT warm start.
1.3.6.1.4.1.10072.2.20.1.1.6.64current
deviceExceptionRestart
NOTIFICATION-TYPE
Only report OLT restart because of exception.
1.3.6.1.4.1.10072.2.20.1.1.6.65current
ethLoopAlarm
NOTIFICATION-TYPE
Ethernet port loop alarm.
1.3.6.1.4.1.10072.2.20.1.1.6.84current
ethLoopAlarmClear
NOTIFICATION-TYPE
Ethernet port loop clear.
1.3.6.1.4.1.10072.2.20.1.1.6.85current
onuLoopAlarm
NOTIFICATION-TYPE
Onu loop alarm.
1.3.6.1.4.1.10072.2.20.1.1.6.86current
onuLoopAlarmClear
NOTIFICATION-TYPE
Onu loop clear.
1.3.6.1.4.1.10072.2.20.1.1.6.87current
backboneEthLinkdown
NOTIFICATION-TYPE
Ethernet port linkdown alarm.
1.3.6.1.4.1.10072.2.20.1.1.6.88current
backboneEthLinkup
NOTIFICATION-TYPE
Ethernet port linkup alarm.
1.3.6.1.4.1.10072.2.20.1.1.6.89current
boardCpuUsageAlarm
NOTIFICATION-TYPE
cpu usage factor alarm
1.3.6.1.4.1.10072.2.20.1.1.6.116current
boardCpuUsageAlarmClear
NOTIFICATION-TYPE
cpu usage factor alarm clear
1.3.6.1.4.1.10072.2.20.1.1.6.117current
boardMemoryUsageAlarm
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.118current
boardMemoryUsageAlarmClear
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.119current
ponPortFullAlarm
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.132current
ponPortAbnormalClear
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.133current
ethPortBroadCastFloodControl
NOTIFICATION-TYPE
Ethernet port broadcast flood alarm.
1.3.6.1.4.1.10072.2.20.1.1.6.136current
ethPortBroadCastFloodControlClear
NOTIFICATION-TYPE
Ethernet port broadcast flood alarm clear.
1.3.6.1.4.1.10072.2.20.1.1.6.137current
sysfileUploadsuccess
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.138current
sysfileUploadfailure
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.139current
sysfileDownloadsuccess
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.140current
sysfileDownloadfailure
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.141current
ponPortLosAlarm
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.142current
ponPortLosAlarmClear
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.143current
ponFWVersionMismatch
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.144current
ponFWVersionMatch
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.145current
ponDBAVersionMismatch
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.146current
ponDBAVersionMatch
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.147current
ponSFPTypeMismatch
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.148current
ponSFPTypeMitch
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.149current
ponPortBRASAlarm
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.150current
ponPortBRASAlarmClear
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.151current
ponPortUpNoTraffic
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.152current
ponPortUpNoTrafficClear
NOTIFICATION-TYPE
1.3.6.1.4.1.10072.2.20.1.1.6.153current
onuDeletingNotify
NOTIFICATION-TYPE
Illegal ONU register.
1.3.6.1.4.1.10072.2.20.1.1.6.154current
onuMacTableOverFlow
NOTIFICATION-TYPE
onu mac table over flow.
1.3.6.1.4.1.10072.2.20.1.1.6.208current
onuMacTableOverFlowClear
NOTIFICATION-TYPE
onu mac table over flow clear.
1.3.6.1.4.1.10072.2.20.1.1.6.209current