MIBs Depot

GSM7312-SWITCHING-MIB

Registered at
1.3.6.1.4.1.4526.1.6.1
Last updated
2003-05-06 12:00
Organization
Netgear
Revisions
2003-02-06 18:35
Namespace
netgear
Source file
GSM7312-SWITCHING-MIB
Digest
sha256:6eb1fde558a5618bc2d08605e4a3ecfed3ba41c2d981839b04c920be4ed0205a

Imports

FromSymbols
GSM7312-REF-MIBAgentPortMask, gsm7312
IANAifType-MIBIANAifType
IF-MIBifIndex
Q-BRIDGE-MIBVlanIndex, dot1qFdbId, dot1qVlanIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
GSM7312-REF-MIB
GSM7312-SWITCHING-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Objects

NameOIDSyntaxAccessStatus
agentInfoGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.1
agentInventoryGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.1.1
agentInventorySysDescription
OBJECT-TYPE
The switch's Inventory system description.
1.3.6.1.4.1.4526.1.6.1.1.1.1DisplayStringread-onlycurrent
agentInventoryMachineType
OBJECT-TYPE
Type of the Machine used in the Switch
1.3.6.1.4.1.4526.1.6.1.1.1.2DisplayStringread-onlycurrent
agentInventoryBurnedInMacAddress
OBJECT-TYPE
Burned-In MAC Address
1.3.6.1.4.1.4526.1.6.1.1.1.3PhysAddressread-onlycurrent
agentInventoryAdditionalPackages
OBJECT-TYPE
Lists additional functional packages available on this unit.
1.3.6.1.4.1.4526.1.6.1.1.1.4DisplayStringread-onlycurrent
agentInventorySoftwareVersion
OBJECT-TYPE
Lists the version of software loaded on this unit.
1.3.6.1.4.1.4526.1.6.1.1.1.5DisplayStringread-onlycurrent
agentTrapLogGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.1.2
agentTrapLogTotal
OBJECT-TYPE
The total number of traps sent since last reset.
1.3.6.1.4.1.4526.1.6.1.1.2.1Integer32read-onlycurrent
agentTrapLogTotalSinceLastViewed
OBJECT-TYPE
The number of traps sent since last viewed.
1.3.6.1.4.1.4526.1.6.1.1.2.3Integer32read-onlydeprecated
agentTrapLogTable
OBJECT-TYPE
Agent Trap Log
1.3.6.1.4.1.4526.1.6.1.1.2.4not-accessiblecurrent
agentTrapLogEntry
OBJECT-TYPE
Agent trap log entry
1.3.6.1.4.1.4526.1.6.1.1.2.4.1not-accessiblecurrent
agentTrapLogIndex
OBJECT-TYPE
Unique index of trap entry
1.3.6.1.4.1.4526.1.6.1.1.2.4.1.1Integer32read-onlycurrent
agentTrapLogSystemTime
OBJECT-TYPE
System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred.
1.3.6.1.4.1.4526.1.6.1.1.2.4.1.2DisplayStringread-onlycurrent
agentTrapLogTrap
OBJECT-TYPE
Description of the trap sent.
1.3.6.1.4.1.4526.1.6.1.1.2.4.1.3OCTET STRING (SIZE(0..512))read-onlycurrent
agentSupportedMibTable
OBJECT-TYPE
Supported MIB table
1.3.6.1.4.1.4526.1.6.1.1.3not-accessiblecurrent
agentSupportedMibEntry
OBJECT-TYPE
Supported MIB entry
1.3.6.1.4.1.4526.1.6.1.1.3.1not-accessiblecurrent
agentSupportedMibIndex
OBJECT-TYPE
Unique index of the Supported MIB entry
1.3.6.1.4.1.4526.1.6.1.1.3.1.1Integer32read-onlycurrent
agentSupportedMibName
OBJECT-TYPE
The name of the MIB (RFC or IEEE) that is supported.
1.3.6.1.4.1.4526.1.6.1.1.3.1.2DisplayStringread-onlycurrent
agentSupportedMibDescription
OBJECT-TYPE
Description of the MIB (RFC or IEEE) that is supported.
1.3.6.1.4.1.4526.1.6.1.1.3.1.3OCTET STRING (SIZE(0..512))read-onlycurrent
agentConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2
agentCLIConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.1
agentLoginSessionTable
OBJECT-TYPE
A table of the switch's login session
1.3.6.1.4.1.4526.1.6.1.2.1.1not-accessiblecurrent
agentLoginSessionEntry
OBJECT-TYPE
Login Session Entry
1.3.6.1.4.1.4526.1.6.1.2.1.1.1not-accessiblecurrent
agentLoginSessionIndex
OBJECT-TYPE
Agent Login Session Index of the switch
1.3.6.1.4.1.4526.1.6.1.2.1.1.1.1Integer32read-onlycurrent
agentLoginSessionUserName
OBJECT-TYPE
Agent Login Session UserName of the switch
1.3.6.1.4.1.4526.1.6.1.2.1.1.1.2DisplayStringread-onlycurrent
agentLoginSessionIPAddress
OBJECT-TYPE
Agent Login Session IP Address of the switch
1.3.6.1.4.1.4526.1.6.1.2.1.1.1.3IpAddressread-onlycurrent
agentLoginSessionConnectionType
OBJECT-TYPE
Agent Login Session Connection Type of the switch
1.3.6.1.4.1.4526.1.6.1.2.1.1.1.4INTEGER {serial(1), telnet(2)}read-onlycurrent
agentLoginSessionIdleTime
OBJECT-TYPE
Agent Login Session Idle Time of the switch
1.3.6.1.4.1.4526.1.6.1.2.1.1.1.5TimeTicksread-onlycurrent
agentLoginSessionSessionTime
OBJECT-TYPE
Agent Login Session Time of the switch
1.3.6.1.4.1.4526.1.6.1.2.1.1.1.6TimeTicksread-onlycurrent
agentLoginSessionStatus
OBJECT-TYPE
Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.
1.3.6.1.4.1.4526.1.6.1.2.1.1.1.7RowStatusread-writecurrent
agentTelnetConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.1.2
agentTelnetLoginTimeout
OBJECT-TYPE
Telnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idle for the value set. Specify a value from 0 to 160. A value of 0 indicates that a Telnet session remains active indefinitely. Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration.
1.3.6.1.4.1.4526.1.6.1.2.1.2.1Integer32 (0..160)read-writecurrent
agentTelnetMaxSessions
OBJECT-TYPE
Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established. If the value is 0, no Telnet session can be established.
1.3.6.1.4.1.4526.1.6.1.2.1.2.2Integer32 (0..5)read-writecurrent
agentTelnetAllowNewMode
OBJECT-TYPE
Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session remains active until the session is ended or an abnormal network error ends it.
1.3.6.1.4.1.4526.1.6.1.2.1.2.3INTEGER {enable(1), disable(2)}read-writecurrent
agentUserConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.1.3
agentUserConfigCreate
OBJECT-TYPE
Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters).
1.3.6.1.4.1.4526.1.6.1.2.1.3.1DisplayString (SIZE(1..8))read-writecurrent
agentUserConfigTable
OBJECT-TYPE
User Config Table
1.3.6.1.4.1.4526.1.6.1.2.1.3.2not-accessiblecurrent
agentUserConfigEntry
OBJECT-TYPE
User Config Entry
1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1not-accessiblecurrent
agentUserIndex
OBJECT-TYPE
Agent User Config Index
1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.1Integer32not-accessiblecurrent
agentUserName
OBJECT-TYPE
Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).
1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.2DisplayString (SIZE(1..8))read-writecurrent
agentUserPassword
OBJECT-TYPE
Agent User Password This object will return an empty string even if a password is set.
1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.3DisplayString (SIZE(0..8))read-writecurrent
agentUserAccessMode
OBJECT-TYPE
Agent User Access Mode
1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.4INTEGER {read(1), write(2)}read-onlycurrent
agentUserStatus
OBJECT-TYPE
Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.
1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.5RowStatusread-writecurrent
agentUserAuthenticationType
OBJECT-TYPE
SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1). none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.6INTEGER {none(1), hmacmd5(2), hmacsha(3)}read-writecurrent
agentUserEncryptionType
OBJECT-TYPE
SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1). none(1) - no encryption used des(2) - DES encryption used
1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.7INTEGER {none(1), des(2)}read-writecurrent
agentUserEncryptionPassword
OBJECT-TYPE
SNMPv3 User Encryption Password This object will return an empty string even if a password is set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty string even if a password is set.
1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.8DisplayString (SIZE(8..64))read-writecurrent
agentSerialGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.1.5
agentSerialTimeout
OBJECT-TYPE
agentSerialTimeout specifies the maximum connect time(in minutes) without console activity. A value of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160.
1.3.6.1.4.1.4526.1.6.1.2.1.5.1Integer32 (0..160)read-writecurrent
agentSerialBaudrate
OBJECT-TYPE
agentSerialBaudrate specifies the current baud rate at which the serial port will try to connect. The available values are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud.
1.3.6.1.4.1.4526.1.6.1.2.1.5.2INTEGER {baud-1200(1), baud-2400(2), baud-4800(3), baud-9600(4), baud-19200(5), baud-38400(6), baud-57600(7), baud-115200(8)}read-writecurrent
agentSerialCharacterSize
OBJECT-TYPE
agentSerialCharacterSize specifies the number of bits in a character. The number of bits is always 8.
1.3.6.1.4.1.4526.1.6.1.2.1.5.3Integer32read-onlycurrent
agentSerialHWFlowControlMode
OBJECT-TYPE
agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled.
1.3.6.1.4.1.4526.1.6.1.2.1.5.4INTEGER {enable(1), disable(2)}read-onlycurrent
agentSerialStopBits
OBJECT-TYPE
agentSerialStopBits specifies the number of Stop bits per character. The number of Stop bits is always 1.
1.3.6.1.4.1.4526.1.6.1.2.1.5.5Integer32read-onlycurrent
agentSerialParityType
OBJECT-TYPE
agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None.
1.3.6.1.4.1.4526.1.6.1.2.1.5.6INTEGER {even(1), odd(2), none(3)}read-onlycurrent
agentLagConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.2
agentLagConfigCreate
OBJECT-TYPE
Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created if possible with the entered string as its name.
1.3.6.1.4.1.4526.1.6.1.2.2.1DisplayString (SIZE(1..15))read-writecurrent
agentLagSummaryConfigTable
OBJECT-TYPE
A summary table of the switch's LAG config entries
1.3.6.1.4.1.4526.1.6.1.2.2.2not-accessiblecurrent
agentLagSummaryConfigEntry
OBJECT-TYPE
Switch's LAG config entry
1.3.6.1.4.1.4526.1.6.1.2.2.2.1not-accessiblecurrent
agentLagSummaryLagIndex
OBJECT-TYPE
Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable.
1.3.6.1.4.1.4526.1.6.1.2.2.2.1.1Integer32read-onlycurrent
agentLagSummaryName
OBJECT-TYPE
Agent LAG Name. The associated name of the LAG used during creation.
1.3.6.1.4.1.4526.1.6.1.2.2.2.1.2DisplayString (SIZE(1..15))read-writecurrent
agentLagSummaryFlushTimer
OBJECT-TYPE
Agent LAG FlushTimer.
1.3.6.1.4.1.4526.1.6.1.2.2.2.1.3Integer32read-writeobsolete
agentLagSummaryLinkTrap
OBJECT-TYPE
Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
1.3.6.1.4.1.4526.1.6.1.2.2.2.1.4INTEGER {enable(1), disable(2)}read-writecurrent
agentLagSummaryAdminMode
OBJECT-TYPE
Agent LAG AdminMode. Administratively enables or disables this LAG interface.
1.3.6.1.4.1.4526.1.6.1.2.2.2.1.5INTEGER {enable(1), disable(2)}read-writecurrent
agentLagSummaryStpMode
OBJECT-TYPE
Agent LAG StpMode If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3) If Dot1s is enabled, the valid values are: off(3) and dot1s(4)
1.3.6.1.4.1.4526.1.6.1.2.2.2.1.6INTEGER {dot1d(1), fast(2), off(3), dot1s(4)}read-writecurrent
agentLagSummaryAddPort
OBJECT-TYPE
Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any.
1.3.6.1.4.1.4526.1.6.1.2.2.2.1.7Integer32read-writecurrent
agentLagSummaryDeletePort
OBJECT-TYPE
Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.
1.3.6.1.4.1.4526.1.6.1.2.2.2.1.8Integer32read-writecurrent
agentLagSummaryStatus
OBJECT-TYPE
Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.
1.3.6.1.4.1.4526.1.6.1.2.2.2.1.9RowStatusread-writecurrent
agentLagSummaryType
OBJECT-TYPE
Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
1.3.6.1.4.1.4526.1.6.1.2.2.2.1.10INTEGER {static(1), dynamic(2)}read-onlycurrent
agentLagDetailedConfigTable
OBJECT-TYPE
A detailed table of the switch's LAG config entries
1.3.6.1.4.1.4526.1.6.1.2.2.3not-accessiblecurrent
agentLagDetailedConfigEntry
OBJECT-TYPE
Switch's LAG config entry
1.3.6.1.4.1.4526.1.6.1.2.2.3.1not-accessiblecurrent
agentLagDetailedLagIndex
OBJECT-TYPE
LAG index
1.3.6.1.4.1.4526.1.6.1.2.2.3.1.1Integer32read-onlycurrent
agentLagDetailedIfIndex
OBJECT-TYPE
LAG port index
1.3.6.1.4.1.4526.1.6.1.2.2.3.1.2Integer32read-onlycurrent
agentLagDetailedPortSpeed
OBJECT-TYPE
LAG port speed. See agentPortType for a description and list of valid values.
1.3.6.1.4.1.4526.1.6.1.2.2.3.1.3OBJECT IDENTIFIERread-onlycurrent
agentLagDetailedPortStatus
OBJECT-TYPE
LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
1.3.6.1.4.1.4526.1.6.1.2.2.3.1.4INTEGER {active(1), inactive(2)}read-onlycurrent
agentLagConfigStaticCapability
OBJECT-TYPE
Agent LAG Static Capability. Configures whether Static LAGs are supported on this device.
1.3.6.1.4.1.4526.1.6.1.2.2.4INTEGER {enable(1), disable(2)}read-writecurrent
agentNetworkConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.3
agentNetworkIPAddress
OBJECT-TYPE
The switch's network ip address
1.3.6.1.4.1.4526.1.6.1.2.3.1IpAddressread-writecurrent
agentNetworkSubnetMask
OBJECT-TYPE
The switch's network subnet mask
1.3.6.1.4.1.4526.1.6.1.2.3.2IpAddressread-writecurrent
agentNetworkDefaultGateway
OBJECT-TYPE
The switch's network default gateway
1.3.6.1.4.1.4526.1.6.1.2.3.3IpAddressread-writecurrent
agentNetworkBurnedInMacAddress
OBJECT-TYPE
The switch's network Burned-In MAC address
1.3.6.1.4.1.4526.1.6.1.2.3.4PhysAddressread-onlycurrent
agentNetworkConfigProtocol
OBJECT-TYPE
The switch's network config protocol
1.3.6.1.4.1.4526.1.6.1.2.3.5INTEGER {none(1), bootp(2), dhcp(3)}read-writecurrent
agentNetworkWebMode
OBJECT-TYPE
The switch's network config protocol on next bootup
1.3.6.1.4.1.4526.1.6.1.2.3.6INTEGER {enable(1), disable(2)}read-writecurrent
agentNetworkJavaMode
OBJECT-TYPE
Configures the use of the Java interface through the Web.
1.3.6.1.4.1.4526.1.6.1.2.3.7INTEGER {enable(1), disable(2)}read-writecurrent
agentNetworkMgmtVlan
OBJECT-TYPE
The VLAN ID through which the switch can be managed using the agentNetworkIPAddress
1.3.6.1.4.1.4526.1.6.1.2.3.8Integer32 (1..4094)read-writecurrent
agentServicePortConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.4
agentServicePortIPAddress
OBJECT-TYPE
The switch's ServicePort ip address
1.3.6.1.4.1.4526.1.6.1.2.4.1IpAddressread-writecurrent
agentServicePortSubnetMask
OBJECT-TYPE
The switch's ServicePort subnet mask
1.3.6.1.4.1.4526.1.6.1.2.4.2IpAddressread-writecurrent
agentServicePortDefaultGateway
OBJECT-TYPE
The switch's ServicePort default gateway
1.3.6.1.4.1.4526.1.6.1.2.4.3IpAddressread-writecurrent
agentServicePortBurnedInMacAddress
OBJECT-TYPE
The switch's ServicePort Burned-In MAC address
1.3.6.1.4.1.4526.1.6.1.2.4.4PhysAddressread-onlycurrent
agentServicePortConfigProtocol
OBJECT-TYPE
The switch's ServicePort config protocol
1.3.6.1.4.1.4526.1.6.1.2.4.5INTEGER {none(1), bootp(2), dhcp(3)}read-writecurrent
agentSnmpConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.6
agentSnmpCommunityCreate
OBJECT-TYPE
Creates a new SNMP Community entry. Defaults: IPAddress 0.0.0.0 IpMask 0.0.0.0 AccessMode read-only Status config
1.3.6.1.4.1.4526.1.6.1.2.6.1DisplayString (SIZE(1..16))read-writecurrent
agentSnmpCommunityConfigTable
OBJECT-TYPE
A table of the switch's SNMP Config entries
1.3.6.1.4.1.4526.1.6.1.2.6.2not-accessiblecurrent
agentSnmpCommunityConfigEntry
OBJECT-TYPE
Switch's SNMP Config entry
1.3.6.1.4.1.4526.1.6.1.2.6.2.1not-accessiblecurrent
agentSnmpCommunityIndex
OBJECT-TYPE
The switch's Snmp Community Index
1.3.6.1.4.1.4526.1.6.1.2.6.2.1.1Integer32read-onlycurrent
agentSnmpCommunityName
OBJECT-TYPE
The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entries using the same community name, the first entry is kept and processed and all duplicate entries are ignored.
1.3.6.1.4.1.4526.1.6.1.2.6.2.1.2DisplayString (SIZE(1..16))read-writecurrent
agentSnmpCommunityIPAddress
OBJECT-TYPE
The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP address is logical-ANDed with the Client IP Mask and the result must match the Client IP Address. Note: If the Client IP Mask is set to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses.
1.3.6.1.4.1.4526.1.6.1.2.6.2.1.3IpAddressread-writecurrent
agentSnmpCommunityIPMask
OBJECT-TYPE
The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client IP Address then the address is an authenticated IP address. For example, if the Client IP Address is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0, a range of incoming IP addresses would match, that is, the incoming IP addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the Client IP Address to the required IP address and set the Client IP Mask to 255.255.255.255.
1.3.6.1.4.1.4526.1.6.1.2.6.2.1.4IpAddressread-writecurrent
agentSnmpCommunityAccessMode
OBJECT-TYPE
The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write. A community with a read-only access allows for switch information to be displayed. A community with a read/write access allows for configuration changes to be made and for information to be displayed.
1.3.6.1.4.1.4526.1.6.1.2.6.2.1.5INTEGER {read-only(1), read-write(2)}read-writecurrent
agentSnmpCommunityStatus
OBJECT-TYPE
The switch's Snmp Community Status. active(1) - This community is active, allowing SNMP managers associated with this community to manage the switch according to its access right. notInService(2) - This community is not active; no SNMP requests using this community will be accepted. In this case the SNMP manager associated with this community cannot manage the switch until the Status is changed back to active(1). config(3) - The community Status must be set to this value in order to configure it. When creating a new community entry, initial Status will be set to this value. destroy(4) - Set to this value to remove the community from the agent.
1.3.6.1.4.1.4526.1.6.1.2.6.2.1.6INTEGER {active(1), notInService(2), config(3), destroy(4)}read-writecurrent
agentSnmpTrapReceiverCreate
OBJECT-TYPE
Creates a new trap receiver entry. Defaults: IPAddress 0.0.0.0 status config
1.3.6.1.4.1.4526.1.6.1.2.6.3DisplayString (SIZE(1..16))read-writecurrent
agentSnmpTrapReceiverConfigTable
OBJECT-TYPE
Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Up to six simultaneous trap receivers are supported.
1.3.6.1.4.1.4526.1.6.1.2.6.4not-accessiblecurrent
agentSnmpTrapReceiverConfigEntry
OBJECT-TYPE
Switch's Snmp Trace Receiver Config entry
1.3.6.1.4.1.4526.1.6.1.2.6.4.1not-accessiblecurrent
agentSnmpTrapReceiverIndex
OBJECT-TYPE
The switch's Snmp Trap Receiver Index
1.3.6.1.4.1.4526.1.6.1.2.6.4.1.1Integer32read-onlycurrent
agentSnmpTrapReceiverCommunityName
OBJECT-TYPE
The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager; the name can be up to 16 characters, and is case-sensitive.
1.3.6.1.4.1.4526.1.6.1.2.6.4.1.2DisplayString (SIZE(1..16))read-writecurrent
agentSnmpTrapReceiverIPAddress
OBJECT-TYPE
IP Address - Each IP address parameter is four integer numbers. The numbers range from 0 to 255.
1.3.6.1.4.1.4526.1.6.1.2.6.4.1.3IpAddressread-writecurrent
agentSnmpTrapReceiverStatus
OBJECT-TYPE
The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to be sent to this receiver. notInService(2) - This trap reciever is not active; no SNMP Traps will be sent to this reciever until it's set back to active(1). config(3) - The trap reciever Status must be set to this value in order to configure it. When creating a new trap receiver entry, the Status will initially be set to this value. Note: agentSnmpTrapReceiverIPAddress must be set to non-zero before changing to active(1) or notInService(2). destroy(4) - Set to this value to remove the trap receiver entry from the agent.
1.3.6.1.4.1.4526.1.6.1.2.6.4.1.4INTEGER {active(1), notInService(2), config(3), destroy(4)}read-writecurrent
agentSnmpTrapFlagsConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.6.5
agentSnmpAuthenticationTrapFlag
OBJECT-TYPE
Authentication Flag - Enable/Disable authentication Flag.
1.3.6.1.4.1.4526.1.6.1.2.6.5.1INTEGER {enable(1), disable(2)}read-writecurrent
agentSnmpLinkUpDownTrapFlag
OBJECT-TYPE
Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap flag setting associated with the port (Port Configuration Menu) is set to Enable.
1.3.6.1.4.1.4526.1.6.1.2.6.5.2INTEGER {enable(1), disable(2)}read-writecurrent
agentSnmpMultipleUsersTrapFlag
OBJECT-TYPE
Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the terminal interface (EIA 232 or Telnet) and there is already an existing terminal interface session.
1.3.6.1.4.1.4526.1.6.1.2.6.5.3INTEGER {enable(1), disable(2)}read-writecurrent
agentSnmpSpanningTreeTrapFlag
OBJECT-TYPE
Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps.
1.3.6.1.4.1.4526.1.6.1.2.6.5.4INTEGER {enable(1), disable(2)}read-writecurrent
agentSnmpBroadcastStormTrapFlag
OBJECT-TYPE
Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration Menu). When this value is set to Enable and Broadcast Storm Recovery mode is set to Enable, the Broadcast Storm Start/End traps are sent when the switch enters and leaves Broadcast Storm Recovery.
1.3.6.1.4.1.4526.1.6.1.2.6.5.5INTEGER {enable(1), disable(2)}read-writecurrent
agentSpanningTreeConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.7
agentSpanningTreeMode
OBJECT-TYPE
The switch's Spanning Tree Switch Status
1.3.6.1.4.1.4526.1.6.1.2.7.1INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.8
agentSwitchBroadcastControlMode
OBJECT-TYPE
The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds 20 percent of the link speed, the switch blocks (discards) the broadcast traffic until the broadcast traffic returns to 10 percent or less. Upper limit for 10M link is 20% and lower limit is 10%. For 100M link Upper limit is 5% and lower limit is 2%
1.3.6.1.4.1.4526.1.6.1.2.8.2INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchDot3FlowControlMode
OBJECT-TYPE
Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports.
1.3.6.1.4.1.4526.1.6.1.2.8.3INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchAddressAgingTimeoutTable
OBJECT-TYPE
The switch's address aging timeout table
1.3.6.1.4.1.4526.1.6.1.2.8.4not-accessiblecurrent
agentSwitchAddressAgingTimeoutEntry
OBJECT-TYPE
Aging information about a specific Filtering Database.
1.3.6.1.4.1.4526.1.6.1.2.8.4.1not-accessiblecurrent
agentSwitchAddressAgingTimeout
OBJECT-TYPE
The FDB entry's address aging timeout (in seconds)
1.3.6.1.4.1.4526.1.6.1.2.8.4.1.1Integer32 (10..1000000)read-writecurrent
agentSwitchIGMPSnoopingGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.8.6
agentSwitchIGMPSnoopingAdminMode
OBJECT-TYPE
This enables or disables IGMP Snooping on the system.
1.3.6.1.4.1.4526.1.6.1.2.8.6.1INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIGMPSnoopingGroupMembershipInterval
OBJECT-TYPE
The amount of time in seconds a switch will wait for a report for a particular group on a particular interface before it deletes the interface from the entry.
1.3.6.1.4.1.4526.1.6.1.2.8.6.2Integer32 (1..3600)read-writecurrent
agentSwitchIGMPSnoopingMaxResponseTime
OBJECT-TYPE
The amount of time in seconds a switch will wait after sending a query on an interface because it did not receive a report for a particular group in that interface. This value must be less than agentSwitchIGMPSnoopingQueryInterval.
1.3.6.1.4.1.4526.1.6.1.2.8.6.3Integer32 (1..3600)read-writecurrent
agentSwitchIGMPSnoopingMRPExpirationTime
OBJECT-TYPE
Multicast Router Present Expiration Time. The amount of time in seconds a switch will wait for a query to be received on an interface before the interface is removed from the list of interfaces with mutlticast routers attached. A value of zero indicates an infinite timeout, i.e. the entries in the list will not expire.
1.3.6.1.4.1.4526.1.6.1.2.8.6.4Integer32 (0..3600)read-writecurrent
agentSwitchIGMPSnoopingPortMask
OBJECT-TYPE
IGMP Snooping Port Mask. This allows configuration of IGMP Snooping on selected ports. IGMP Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port which has IGMP Snooping enabled becomes enabled for routing, or is enlisted as a member of a LAG, IGMP Snooping functionality will be disabled on that port. IGMP Snooping functionality will be subsequently be reenabled if routing is disabled or LAG membership is removed from an interface that had previously had IGMP Snooping enabled. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
1.3.6.1.4.1.4526.1.6.1.2.8.6.5AgentPortMaskread-writecurrent
agentSwitchIGMPSnoopingMulticastControlFramesProcessed
OBJECT-TYPE
Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.
1.3.6.1.4.1.4526.1.6.1.2.8.6.6Counter32read-onlycurrent
agentSwitchMFDBGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.8.7
agentSwitchMFDBTable
OBJECT-TYPE
The Multicast Forwarding Database table
1.3.6.1.4.1.4526.1.6.1.2.8.7.1not-accessiblecurrent
agentSwitchMFDBEntry
OBJECT-TYPE
Contains Forwarding and Filtering information per Vlan Index, MAC Address, and Component User.
1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1not-accessiblecurrent
agentSwitchMFDBVlanId
OBJECT-TYPE
Vlan Index for which this entry is associated with.
1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.1VlanIndexread-onlycurrent
agentSwitchMFDBMacAddress
OBJECT-TYPE
A multicast MAC address for which the switch has forwarding and or filtering information.
1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.2MacAddressread-onlycurrent
agentSwitchMFDBProtocolType
OBJECT-TYPE
The component that is responsible for this entry in the Multicast Forwarding Database.
1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.3INTEGER {static(1), gmrp(2), igmp(3)}read-onlycurrent
agentSwitchMFDBType
OBJECT-TYPE
This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.4INTEGER {static(1), dynamic(2)}read-onlycurrent
agentSwitchMFDBDescription
OBJECT-TYPE
Text description of this multicast table entry.
1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.5DisplayStringread-onlycurrent
agentSwitchMFDBForwardingPortMask
OBJECT-TYPE
BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.6AgentPortMaskread-onlycurrent
agentSwitchMFDBFilteringPortMask
OBJECT-TYPE
BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.7AgentPortMaskread-onlycurrent
agentSwitchMFDBSummaryTable
OBJECT-TYPE
The Multicast Forwarding Database Summary table
1.3.6.1.4.1.4526.1.6.1.2.8.7.2not-accessiblecurrent
agentSwitchMFDBSummaryEntry
OBJECT-TYPE
Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address.
1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1not-accessiblecurrent
agentSwitchMFDBSummaryVlanId
OBJECT-TYPE
Vlan Index for which this entry is associated with.
1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1.1VlanIndexread-onlycurrent
agentSwitchMFDBSummaryMacAddress
OBJECT-TYPE
A multicast MAC address for which the switch has forwarding and or filtering information.
1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1.2MacAddressread-onlycurrent
agentSwitchMFDBSummaryForwardingPortMask
OBJECT-TYPE
Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1.3AgentPortMaskread-onlycurrent
agentSwitchMFDBMaxTableEntries
OBJECT-TYPE
This displays the maximum number of entries that can possibly be in the Multicast Forwarding Database table.
1.3.6.1.4.1.4526.1.6.1.2.8.7.3Gauge32read-onlycurrent
agentSwitchMFDBMostEntriesUsed
OBJECT-TYPE
This displays the largest number of entries that have been present in the Multicast Forwarding Database table. This value is also known as the MFDB high-water mark.
1.3.6.1.4.1.4526.1.6.1.2.8.7.4Gauge32read-onlycurrent
agentSwitchMFDBCurrentEntries
OBJECT-TYPE
This displays the current number of entries in the Multicast Forwarding Database table.
1.3.6.1.4.1.4526.1.6.1.2.8.7.5Gauge32read-onlycurrent
agentTransferConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.9
agentTransferUploadGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.9.1
agentTransferUploadMode
OBJECT-TYPE
Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port.
1.3.6.1.4.1.4526.1.6.1.2.9.1.1INTEGER {tftp(1), xmodem(2), ymodem(3), zmodem(4)}read-writecurrent
agentTransferUploadServerIP
OBJECT-TYPE
Transfer upload tftpserverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP. The address is 4 integer bytes ranging from 0 to 255.
1.3.6.1.4.1.4526.1.6.1.2.9.1.2IpAddressread-writecurrent
agentTransferUploadPath
OBJECT-TYPE
Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.
1.3.6.1.4.1.4526.1.6.1.2.9.1.3DisplayString (SIZE(0..31))read-writecurrent
agentTransferUploadFilename
OBJECT-TYPE
Transfer upload tftpfilename configures the file name for the file being uploaded from the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 17 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and TFTP Server IP Address are applicable only if the Transfer Mode is TFTP.
1.3.6.1.4.1.4526.1.6.1.2.9.1.4DisplayString (SIZE(0..31))read-writecurrent
agentTransferUploadDataType
OBJECT-TYPE
Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - Message log - Trap log
1.3.6.1.4.1.4526.1.6.1.2.9.1.5INTEGER {config(2), errorlog(3), messagelog(4), traplog(5)}read-writecurrent
agentTransferUploadStart
OBJECT-TYPE
Transfer upload start will start an upload transfer. The agentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
1.3.6.1.4.1.4526.1.6.1.2.9.1.6INTEGER {enable(1), disable(2)}read-writecurrent
agentTransferUploadStatus
OBJECT-TYPE
Indicates the current status of an upload transfer.
1.3.6.1.4.1.4526.1.6.1.2.9.1.7INTEGER {notInitiated(1), transferStarting(2), errorStarting(3), wrongFileType(4), updatingConfig(5), invalidConfigFile(6), writingToFlash(7), failureWritingToFlash(8), checkingCRC(9), failedCRC(10), unknownDirection(11), transferSuccessful(12), transferFailed(13)}read-onlycurrent
agentTransferDownloadGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.9.2
agentTransferDownloadMode
OBJECT-TYPE
Transfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port.
1.3.6.1.4.1.4526.1.6.1.2.9.2.1INTEGER {tftp(1), xmodem(2), ymodem(3), zmodem(4)}read-writecurrent
agentTransferDownloadServerIP
OBJECT-TYPE
Transfer download tftpserverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP. The address is 4 integer bytes ranging from 0 to 255.
1.3.6.1.4.1.4526.1.6.1.2.9.2.2IpAddressread-writecurrent
agentTransferDownloadPath
OBJECT-TYPE
Transfer download tftppath configures the directory path where the file is located. The switch remembers the last file path used.
1.3.6.1.4.1.4526.1.6.1.2.9.2.3DisplayString (SIZE(0..31))read-writecurrent
agentTransferDownloadFilename
OBJECT-TYPE
Transfer download tftpfilename configures the file name for the file being downloaded to the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 33 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and TFTP Server IP Address are applicable only if the Transfer Mode is TFTP.
1.3.6.1.4.1.4526.1.6.1.2.9.2.4DisplayString (SIZE(0..31))read-writecurrent
agentTransferDownloadDataType
OBJECT-TYPE
Transfer download datatype configures the type of file to download to the switch. The types for download are: code - Code File config - Configuration File sshkey-rsa1 - SSH-1 RSA Key File sshkey-rsa2 - SSH-2 RSA Key PEM File sshkey-dsa - SSH-2 DSA Key PEM File sslpem-root - SSL Trusted Root Certificate PEM File sslpem-server - SSL Server Certificate PEM File sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File Note: SSH Key files can only be downloaded if SSH Server is administratively disabled, and there are no active SSH sessions.
1.3.6.1.4.1.4526.1.6.1.2.9.2.5INTEGER {code(2), config(3), sshkey-rsa1(4), sshkey-rsa2(5), sshkey-dsa(6), sslpem-root(7), sslpem-server(8), sslpem-dhweak(9), sslpem-dhstrong(10)}read-writecurrent
agentTransferDownloadStart
OBJECT-TYPE
Transfer download start will start an download transfer. The agentTransferDownloadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
1.3.6.1.4.1.4526.1.6.1.2.9.2.6INTEGER {enable(1), disable(2)}read-writecurrent
agentTransferDownloadStatus
OBJECT-TYPE
Indicates the current status of an download transfer.
1.3.6.1.4.1.4526.1.6.1.2.9.2.7INTEGER {notInitiated(1), transferStarting(2), errorStarting(3), wrongFileType(4), updatingConfig(5), invalidConfigFile(6), writingToFlash(7), failureWritingToFlash(8), checkingCRC(9), failedCRC(10), unknownDirection(11), transferSuccessful(12), transferFailed(13)}read-onlycurrent
agentPortMirroringGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.10
agentMirroredPortIfIndex
OBJECT-TYPE
IfIndex of the mirrored port
1.3.6.1.4.1.4526.1.6.1.2.10.1Integer32read-writecurrent
agentProbePortIfIndex
OBJECT-TYPE
IfIndex of the probe port
1.3.6.1.4.1.4526.1.6.1.2.10.2Integer32read-writecurrent
agentPortMirroringMode
OBJECT-TYPE
Port mirroring mode: enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration
1.3.6.1.4.1.4526.1.6.1.2.10.3INTEGER {enable(1), disable(2), delete(3)}read-writecurrent
agentDot3adAggPortTable
OBJECT-TYPE
This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
1.3.6.1.4.1.4526.1.6.1.2.12not-accessiblecurrent
agentDot3adAggPortEntry
OBJECT-TYPE
Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
1.3.6.1.4.1.4526.1.6.1.2.12.1not-accessiblecurrent
agentDot3adAggPort
OBJECT-TYPE
ifIndex of this physical port
1.3.6.1.4.1.4526.1.6.1.2.12.1.1Integer32read-onlycurrent
agentDot3adAggPortLACPMode
OBJECT-TYPE
Enable/disable 802.3ad LACP on this port
1.3.6.1.4.1.4526.1.6.1.2.12.1.2INTEGER {enable(1), disable(2)}read-writecurrent
agentPortConfigTable
OBJECT-TYPE
A table of the switch's physical port config entries
1.3.6.1.4.1.4526.1.6.1.2.13not-accessiblecurrent
agentPortConfigEntry
OBJECT-TYPE
Switch's physical port config entry
1.3.6.1.4.1.4526.1.6.1.2.13.1not-accessiblecurrent
agentPortDot1dBasePort
OBJECT-TYPE
The port number of this port.
1.3.6.1.4.1.4526.1.6.1.2.13.1.1Integer32 (1..65535)read-onlycurrent
agentPortIfIndex
OBJECT-TYPE
The switch's Port IfIndex
1.3.6.1.4.1.4526.1.6.1.2.13.1.2Integer32read-onlycurrent
agentPortIanaType
OBJECT-TYPE
The switch's Port Type
1.3.6.1.4.1.4526.1.6.1.2.13.1.3IANAifTyperead-onlycurrent
agentPortSTPMode
OBJECT-TYPE
The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port This object is only supported when the Dot1d Protocol is enabled.
1.3.6.1.4.1.4526.1.6.1.2.13.1.4INTEGER {dot1d(1), fast(2), off(3)}read-writecurrent
agentPortSTPState
OBJECT-TYPE
The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
1.3.6.1.4.1.4526.1.6.1.2.13.1.5INTEGER {blocking(1), listening(2), learning(3), forwarding(4), disabled(5)}read-onlycurrent
agentPortAdminMode
OBJECT-TYPE
The switch's Port Admin Mode
1.3.6.1.4.1.4526.1.6.1.2.13.1.6INTEGER {enable(1), disable(2)}read-writecurrent
agentPortPhysicalMode
OBJECT-TYPE
The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
1.3.6.1.4.1.4526.1.6.1.2.13.1.7INTEGER {auto-negotiate(1), half-10(2), full-10(3), half-100(4), full-100(5), half-100fx(6), full-100fx(7), full-1000sx(8)}read-writeobsolete
agentPortPhysicalStatus
OBJECT-TYPE
The switch's Port Physical Speed Status. This is the current actual speed.
1.3.6.1.4.1.4526.1.6.1.2.13.1.8INTEGER {auto-negotiate(1), half-10(2), full-10(3), half-100(4), full-100(5), half-100fx(6), full-100fx(7), full-1000sx(8)}read-onlyobsolete
agentPortLinkTrapMode
OBJECT-TYPE
If enabled, link up and link down traps will be sent for this port.
1.3.6.1.4.1.4526.1.6.1.2.13.1.9INTEGER {enable(1), disable(2)}read-writecurrent
agentPortClearStats
OBJECT-TYPE
clear stats for this port only
1.3.6.1.4.1.4526.1.6.1.2.13.1.10INTEGER {enable(1), disable(2)}read-writecurrent
agentPortDefaultType
OBJECT-TYPE
This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. The set of possible values for this object is the same as the set defined for the agentPortType object. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD
1.3.6.1.4.1.4526.1.6.1.2.13.1.11OBJECT IDENTIFIERread-writecurrent
agentPortType
OBJECT-TYPE
This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object agentPortDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object agentPortDefaultType will force the MAU into the new operating mode. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD dot3MauType1000BaseTFD
1.3.6.1.4.1.4526.1.6.1.2.13.1.12OBJECT IDENTIFIERread-onlycurrent
agentPortAutoNegAdminStatus
OBJECT-TYPE
This object identifies the administration status of auto negotiation for this port.
1.3.6.1.4.1.4526.1.6.1.2.13.1.13INTEGER {enable(1), disable(2)}read-writecurrent
agentPortDot3FlowControlMode
OBJECT-TYPE
Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports.
1.3.6.1.4.1.4526.1.6.1.2.13.1.14INTEGER {enable(1), disable(2)}read-writecurrent
agentPortDVlanTagMode
OBJECT-TYPE
Controls the Double Vlan Tag mode on this port.
1.3.6.1.4.1.4526.1.6.1.2.13.1.15INTEGER {enable(1), disable(2)}read-writecurrent
agentPortDVlanTagEthertype
OBJECT-TYPE
Configures the Ethertype for the Double Vlan Tag for this port. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8) and dot1q tags (33024, or 0x8100).
1.3.6.1.4.1.4526.1.6.1.2.13.1.16Integer32 (0..65535)read-writecurrent
agentPortDVlanTagCustomerId
OBJECT-TYPE
Configures the Customer ID for the Double Vlan Tag for this port.
1.3.6.1.4.1.4526.1.6.1.2.13.1.17Integer32read-writecurrent
agentPortMaxFrameSizeLimit
OBJECT-TYPE
This object identifies the largest value that can be configured for agentPortMaxFrameSize
1.3.6.1.4.1.4526.1.6.1.2.13.1.18Integer32read-onlycurrent
agentPortMaxFrameSize
OBJECT-TYPE
This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
1.3.6.1.4.1.4526.1.6.1.2.13.1.19Integer32read-writecurrent
agentProtocolConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.14
agentProtocolGroupCreate
OBJECT-TYPE
Set to non-empty string to create a Protocol-Based VLAN group.
1.3.6.1.4.1.4526.1.6.1.2.14.1DisplayString (SIZE(1..16))read-writecurrent
agentProtocolGroupTable
OBJECT-TYPE
A table of the switch's Protocol-based VLAN entries
1.3.6.1.4.1.4526.1.6.1.2.14.2not-accessiblecurrent
agentProtocolGroupEntry
OBJECT-TYPE
Switch's Protocol-based VLAN entry
1.3.6.1.4.1.4526.1.6.1.2.14.2.1not-accessiblecurrent
agentProtocolGroupId
OBJECT-TYPE
Group identifier of the Protocol-based VLAN entry.
1.3.6.1.4.1.4526.1.6.1.2.14.2.1.1Integer32read-onlycurrent
agentProtocolGroupName
OBJECT-TYPE
Group name of the Protocol-based VLAN entry.
1.3.6.1.4.1.4526.1.6.1.2.14.2.1.2DisplayStringread-onlycurrent
agentProtocolGroupVlanId
OBJECT-TYPE
VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.
1.3.6.1.4.1.4526.1.6.1.2.14.2.1.3Integer32read-writecurrent
agentProtocolGroupProtocolIP
OBJECT-TYPE
The status of the IP protocol association with the Protocol-based VLAN entry.
1.3.6.1.4.1.4526.1.6.1.2.14.2.1.4INTEGER {enable(1), disable(2)}read-writecurrent
agentProtocolGroupProtocolARP
OBJECT-TYPE
The status of the ARP protocol association with the Protocol-based VLAN entry.
1.3.6.1.4.1.4526.1.6.1.2.14.2.1.5INTEGER {enable(1), disable(2)}read-writecurrent
agentProtocolGroupProtocolIPX
OBJECT-TYPE
The status of the IPX protocol association with the Protocol-based VLAN entry.
1.3.6.1.4.1.4526.1.6.1.2.14.2.1.6INTEGER {enable(1), disable(2)}read-writecurrent
agentProtocolGroupStatus
OBJECT-TYPE
The status of the Protocol-based VLAN entry. active(1) - this entry is active destroy(6) - remove this entry
1.3.6.1.4.1.4526.1.6.1.2.14.2.1.7RowStatusread-writecurrent
agentProtocolGroupPortTable
OBJECT-TYPE
A table of the switch's physical port config entries
1.3.6.1.4.1.4526.1.6.1.2.14.3not-accessiblecurrent
agentProtocolGroupPortEntry
OBJECT-TYPE
Switch's physical port config entry
1.3.6.1.4.1.4526.1.6.1.2.14.3.1not-accessiblecurrent
agentProtocolGroupPortIfIndex
OBJECT-TYPE
The interface number of this instance.
1.3.6.1.4.1.4526.1.6.1.2.14.3.1.1Integer32read-onlycurrent
agentProtocolGroupPortStatus
OBJECT-TYPE
The status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove the port from this group
1.3.6.1.4.1.4526.1.6.1.2.14.3.1.2RowStatusread-createcurrent
agentStpSwitchConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.15
agentStpConfigDigestKey
OBJECT-TYPE
The MST configuration digest key.
1.3.6.1.4.1.4526.1.6.1.2.15.1OCTET STRING (SIZE(16))read-onlycurrent
agentStpConfigFormatSelector
OBJECT-TYPE
The MST configuration format selector. A value other than 0 (zero) indicates non-support for the IEEE 802.1s standard.
1.3.6.1.4.1.4526.1.6.1.2.15.2Unsigned32 (0..255)read-onlycurrent
agentStpConfigName
OBJECT-TYPE
The MST configuration name of at most 32 characters.
1.3.6.1.4.1.4526.1.6.1.2.15.3DisplayString (SIZE(1..32))read-writecurrent
agentStpConfigRevision
OBJECT-TYPE
The MST configuration revision. The default value is 1.
1.3.6.1.4.1.4526.1.6.1.2.15.4Unsigned32 (0..65535)read-writecurrent
agentStpForceVersion
OBJECT-TYPE
The MST configuration force protocol version. The default version is dot1s.
1.3.6.1.4.1.4526.1.6.1.2.15.5INTEGER {dot1d(1), dot1w(2), dot1s(3)}read-writecurrent
agentStpAdminMode
OBJECT-TYPE
The spanning tree operational status. enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational status on the switch. The default status is disabled.
1.3.6.1.4.1.4526.1.6.1.2.15.6INTEGER {enable(1), disable(2)}read-writecurrent
agentStpPortTable
OBJECT-TYPE
STP port table.
1.3.6.1.4.1.4526.1.6.1.2.15.7not-accessiblecurrent
agentStpPortEntry
OBJECT-TYPE
STP port entry.
1.3.6.1.4.1.4526.1.6.1.2.15.7.1not-accessiblecurrent
agentStpPortState
OBJECT-TYPE
The administrative bridge port state. enable(1) - enables the port. disable(2) - disables the port. The default port state is enabled for the first 4095 ports and disabled for any ports beyond.
1.3.6.1.4.1.4526.1.6.1.2.15.7.1.1INTEGER {enable(1), disable(2)}read-writecurrent
agentStpPortStatsMstpBpduRx
OBJECT-TYPE
The MSTP BPDUs received on a specific port.
1.3.6.1.4.1.4526.1.6.1.2.15.7.1.2Counter32read-onlycurrent
agentStpPortStatsMstpBpduTx
OBJECT-TYPE
The MSTP BPDUs sent from a specific port.
1.3.6.1.4.1.4526.1.6.1.2.15.7.1.3Counter32read-onlycurrent
agentStpPortStatsRstpBpduRx
OBJECT-TYPE
The RSTP BPDUs received on a specific port.
1.3.6.1.4.1.4526.1.6.1.2.15.7.1.4Counter32read-onlycurrent
agentStpPortStatsRstpBpduTx
OBJECT-TYPE
The RSTP BPDUs sent from a specific port.
1.3.6.1.4.1.4526.1.6.1.2.15.7.1.5Counter32read-onlycurrent
agentStpPortStatsStpBpduRx
OBJECT-TYPE
The STP BPDUs received on a specific port.
1.3.6.1.4.1.4526.1.6.1.2.15.7.1.6Counter32read-onlycurrent
agentStpPortStatsStpBpduTx
OBJECT-TYPE
The STP BPDUs sent from a specific port.
1.3.6.1.4.1.4526.1.6.1.2.15.7.1.7Counter32read-onlycurrent
agentStpPortUpTime
OBJECT-TYPE
Time since port was reset. It is displayed in days, hours, minutes, and seconds.
1.3.6.1.4.1.4526.1.6.1.2.15.7.1.8TimeTicksread-onlycurrent
agentStpPortMigrationCheck
OBJECT-TYPE
Force the specified port to transmit RSTP or MSTP BPDU's. Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A non-zero value indicates that BPDUs are to be sent on the specified port.
1.3.6.1.4.1.4526.1.6.1.2.15.7.1.9INTEGER {false(0), true(1)}read-writecurrent
agentStpCstConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.15.8
agentStpCstHelloTime
OBJECT-TYPE
The MSTP root port hello time for the CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.8.1Unsigned32read-onlycurrent
agentStpCstMaxAge
OBJECT-TYPE
The MSTP root port max age for the CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.8.2Unsigned32read-onlycurrent
agentStpCstRegionalRootId
OBJECT-TYPE
The MSTP regional root identifier for the CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.8.3OCTET STRING (SIZE(8))read-onlycurrent
agentStpCstRegionalRootPathCost
OBJECT-TYPE
The MSTP regional root path cost for the CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.8.4Unsigned32read-onlycurrent
agentStpCstRootFwdDelay
OBJECT-TYPE
The MSTP root port forward delay for the CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.8.5Unsigned32read-onlycurrent
agentStpCstBridgeFwdDelay
OBJECT-TYPE
The MSTP bridge forward delay for the CIST. The default value is 15.
1.3.6.1.4.1.4526.1.6.1.2.15.8.6Unsigned32 (4..30)read-writecurrent
agentStpCstBridgeHelloTime
OBJECT-TYPE
The MSTP bridge hello time for the CIST. The default value is 2.
1.3.6.1.4.1.4526.1.6.1.2.15.8.7Unsigned32 (1..10)read-writecurrent
agentStpCstBridgeHoldTime
OBJECT-TYPE
The MSTP bridge hold time for the CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.8.8Unsigned32read-onlycurrent
agentStpCstBridgeMaxAge
OBJECT-TYPE
The MSTP bridge max age for the CIST. The default value is 20.
1.3.6.1.4.1.4526.1.6.1.2.15.8.9Unsigned32 (6..40)read-writecurrent
agentStpCstPortTable
OBJECT-TYPE
CIST port table.
1.3.6.1.4.1.4526.1.6.1.2.15.9not-accessiblecurrent
agentStpCstPortEntry
OBJECT-TYPE
CIST port entry.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1not-accessiblecurrent
agentStpCstPortOperEdge
OBJECT-TYPE
The MSTP operational status of a specific port for the CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.1INTEGER {enable(1), disable(2)}read-onlycurrent
agentStpCstPortOperPointToPoint
OBJECT-TYPE
The MSTP operational point to point mac of a specific port for the CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.2INTEGER {true(1), false(2)}read-onlycurrent
agentStpCstPortTopologyChangeAck
OBJECT-TYPE
The MSTP topology change acknowledge for a specific port in the CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.3INTEGER {true(1), false(2)}read-onlycurrent
agentStpCstPortEdge
OBJECT-TYPE
The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.4INTEGER {enable(1), disable(2)}read-writecurrent
agentStpCstPortForwardingState
OBJECT-TYPE
The MSTP forwarding state of a specific port in CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.5INTEGER {discarding(1), learning(2), forwarding(3), disabled(4), manualFwd(5), notParticipate(6)}read-onlycurrent
agentStpCstPortId
OBJECT-TYPE
The MSTP port identifier of a specific port in CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.6OCTET STRING (SIZE(4))read-onlycurrent
agentStpCstPortPathCost
OBJECT-TYPE
The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.7Unsigned32 (0..200000000)read-writecurrent
agentStpCstPortPriority
OBJECT-TYPE
The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.8Unsigned32 (0..240)read-writecurrent
agentStpCstDesignatedBridgeId
OBJECT-TYPE
The MSTP designated bridge ID of a specific port in CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.9OCTET STRING (SIZE(8))read-onlycurrent
agentStpCstDesignatedCost
OBJECT-TYPE
The MSTP designated cost of a specific port in CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.10Unsigned32read-onlycurrent
agentStpCstDesignatedPortId
OBJECT-TYPE
The MSTP designated port ID of a specific port in CIST.
1.3.6.1.4.1.4526.1.6.1.2.15.9.1.11OCTET STRING (SIZE(2))read-onlycurrent
agentStpMstTable
OBJECT-TYPE
MST table.
1.3.6.1.4.1.4526.1.6.1.2.15.10not-accessiblecurrent
agentStpMstEntry
OBJECT-TYPE
MST entry.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1not-accessiblecurrent
agentStpMstId
OBJECT-TYPE
The MSTP instance ID.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1.1Unsigned32read-onlycurrent
agentStpMstBridgePriority
OBJECT-TYPE
The MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1.2Unsigned32 (0..61440)read-writecurrent
agentStpMstBridgeIdentifier
OBJECT-TYPE
The MSTP bridge identifier in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1.3OCTET STRING (SIZE(8))read-onlycurrent
agentStpMstDesignatedRootId
OBJECT-TYPE
The MSTP designated root bridge identifier in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1.4OCTET STRING (SIZE(8))read-onlycurrent
agentStpMstRootPathCost
OBJECT-TYPE
The MSTP root path cost in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1.5Unsigned32read-onlycurrent
agentStpMstRootPortId
OBJECT-TYPE
The MSTP root port ID in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1.6OCTET STRING (SIZE(8))read-onlycurrent
agentStpMstTimeSinceTopologyChange
OBJECT-TYPE
The MSTP time since the last topology change in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1.7TimeTicksread-onlycurrent
agentStpMstTopologyChangeCount
OBJECT-TYPE
The MSTP count of topology changes in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1.8Counter32read-onlycurrent
agentStpMstTopologyChangeParm
OBJECT-TYPE
The MSTP topology change parameter in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1.9INTEGER {true(1), false(2)}read-onlycurrent
agentStpMstRowStatus
OBJECT-TYPE
The MSTP instance status. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance.
1.3.6.1.4.1.4526.1.6.1.2.15.10.1.10RowStatusread-createcurrent
agentStpMstPortTable
OBJECT-TYPE
MST port table.
1.3.6.1.4.1.4526.1.6.1.2.15.11not-accessiblecurrent
agentStpMstPortEntry
OBJECT-TYPE
MST port entry.
1.3.6.1.4.1.4526.1.6.1.2.15.11.1not-accessiblecurrent
agentStpMstPortForwardingState
OBJECT-TYPE
The MSTP forwarding state of a specific port in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.11.1.1INTEGER {discarding(1), learning(2), forwarding(3), disabled(4), manualFwd(5), notParticipate(6)}read-onlycurrent
agentStpMstPortId
OBJECT-TYPE
The MSTP port identifier of a specific port in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.11.1.2OCTET STRING (SIZE(4))read-onlycurrent
agentStpMstPortPathCost
OBJECT-TYPE
The MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.
1.3.6.1.4.1.4526.1.6.1.2.15.11.1.3Unsigned32 (0..200000000)read-writecurrent
agentStpMstPortPriority
OBJECT-TYPE
The MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128.
1.3.6.1.4.1.4526.1.6.1.2.15.11.1.4Unsigned32 (0..240)read-writecurrent
agentStpMstDesignatedBridgeId
OBJECT-TYPE
The MSTP designated bridge ID of a specific port in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.11.1.5OCTET STRING (SIZE(8))read-onlycurrent
agentStpMstDesignatedCost
OBJECT-TYPE
The MSTP designated cost of a specific port in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.11.1.6Unsigned32read-onlycurrent
agentStpMstDesignatedPortId
OBJECT-TYPE
The MSTP designated port ID of a specific port in a specific instance.
1.3.6.1.4.1.4526.1.6.1.2.15.11.1.7OCTET STRING (SIZE(2))read-onlycurrent
agentStpMstVlanTable
OBJECT-TYPE
MST VLAN table.
1.3.6.1.4.1.4526.1.6.1.2.15.12not-accessiblecurrent
agentStpMstVlanEntry
OBJECT-TYPE
MST VLAN entry.
1.3.6.1.4.1.4526.1.6.1.2.15.12.1not-accessiblecurrent
agentStpMstVlanRowStatus
OBJECT-TYPE
The association status of an MSTP instance and a VLAN. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN.
1.3.6.1.4.1.4526.1.6.1.2.15.12.1.1RowStatusread-createcurrent
agentAuthenticationGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.16
agentAuthenticationListCreate
OBJECT-TYPE
Authentication List Create If set to a non empty string, creates a new Authentication List for configuration.
1.3.6.1.4.1.4526.1.6.1.2.16.1DisplayString (SIZE(1..15))read-writecurrent
agentAuthenticationListTable
OBJECT-TYPE
MST VLAN table.
1.3.6.1.4.1.4526.1.6.1.2.16.2not-accessiblecurrent
agentAuthenticationListEntry
OBJECT-TYPE
MST VLAN entry.
1.3.6.1.4.1.4526.1.6.1.2.16.2.1not-accessiblecurrent
agentAuthenticationListIndex
OBJECT-TYPE
Authenticaiton List Index Unique number used for indexing into this table.
1.3.6.1.4.1.4526.1.6.1.2.16.2.1.1Unsigned32not-accessiblecurrent
agentAuthenticationListName
OBJECT-TYPE
Authenticaiton List Name Unique name used to identify the Authentication List from other tables.
1.3.6.1.4.1.4526.1.6.1.2.16.2.1.2DisplayString (SIZE(1..15))read-onlycurrent
agentAuthenticationListMethod1
OBJECT-TYPE
Authenticion List Method 1 Configures the first authentication method to use when this list is specified.
1.3.6.1.4.1.4526.1.6.1.2.16.2.1.3INTEGER {local(1), radius(2), reject(3)}read-writecurrent
agentAuthenticationListMethod2
OBJECT-TYPE
Authenticion List Method 2 Configures the second authentication method to use when this list is specified.
1.3.6.1.4.1.4526.1.6.1.2.16.2.1.4INTEGER {undefined(1), local(2), radius(3), reject(4)}read-writecurrent
agentAuthenticationListMethod3
OBJECT-TYPE
Authenticion List Method 3 Configures the third authentication method to use when this list is specified.
1.3.6.1.4.1.4526.1.6.1.2.16.2.1.5INTEGER {undefined(1), local(2), radius(3), reject(4)}read-writecurrent
agentAuthenticationListStatus
OBJECT-TYPE
The status of the Authentication List. Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List.
1.3.6.1.4.1.4526.1.6.1.2.16.2.1.6RowStatusread-writecurrent
agentUserConfigDefaultAuthenticationList
OBJECT-TYPE
Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list must be configured before setting.
1.3.6.1.4.1.4526.1.6.1.2.16.3DisplayString (SIZE(1..15))read-writecurrent
agentUserAuthenticationConfigTable
OBJECT-TYPE
User Authentication Config Table
1.3.6.1.4.1.4526.1.6.1.2.16.4not-accessiblecurrent
agentUserAuthenticationConfigEntry
OBJECT-TYPE
User Authentication Config Entry
1.3.6.1.4.1.4526.1.6.1.2.16.4.1not-accessiblecurrent
agentUserAuthenticationList
OBJECT-TYPE
User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting.
1.3.6.1.4.1.4526.1.6.1.2.16.4.1.1DisplayString (SIZE(1..15))read-writecurrent
agentUserPortConfigTable
OBJECT-TYPE
User Port Config Table
1.3.6.1.4.1.4526.1.6.1.2.16.5not-accessiblecurrent
agentUserPortConfigEntry
OBJECT-TYPE
User Port Config Entry
1.3.6.1.4.1.4526.1.6.1.2.16.5.1not-accessiblecurrent
agentUserPortSecurity
OBJECT-TYPE
User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in dot1dBasePortTable.
1.3.6.1.4.1.4526.1.6.1.2.16.5.1.1AgentPortMaskread-writecurrent
agentClassOfServiceGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.2.17
agentClassOfServiceTable
OBJECT-TYPE
A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port.
1.3.6.1.4.1.4526.1.6.1.2.17.1not-accessiblecurrent
agentClassOfServiceEntry
OBJECT-TYPE
A 802.1p priority mapped to a traffic class priority queue.
1.3.6.1.4.1.4526.1.6.1.2.17.1.1not-accessiblecurrent
agentClassOfServicePriority
OBJECT-TYPE
The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port.
1.3.6.1.4.1.4526.1.6.1.2.17.1.1.1Integer32 (0..7)not-accessiblecurrent
agentClassOfServiceClass
OBJECT-TYPE
Traffic class priority queue the received frame is mapped to.
1.3.6.1.4.1.4526.1.6.1.2.17.1.1.2Integer32 (0..7)read-writecurrent
agentSystemGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.3
agentSaveConfig
OBJECT-TYPE
Enable agentSaveConfig will initiate an configuration save to nvram. Disable agentSaveConfig after a configuration save will reset agentSaveConfigStatus back to notInitiated state.
1.3.6.1.4.1.4526.1.6.1.3.1INTEGER {enable(1), disable(2)}read-writecurrent
agentClearConfig
OBJECT-TYPE
clear config to factory defaults
1.3.6.1.4.1.4526.1.6.1.3.2INTEGER {enable(1), disable(2)}read-writecurrent
agentClearLags
OBJECT-TYPE
clear lag configuration
1.3.6.1.4.1.4526.1.6.1.3.3INTEGER {enable(1), disable(2)}read-writecurrent
agentClearLoginSessions
OBJECT-TYPE
close all telnet sessions
1.3.6.1.4.1.4526.1.6.1.3.4INTEGER {enable(1), disable(2)}read-writecurrent
agentClearPasswords
OBJECT-TYPE
reset passwords
1.3.6.1.4.1.4526.1.6.1.3.5INTEGER {enable(1), disable(2)}read-writecurrent
agentClearPortStats
OBJECT-TYPE
clear all port statistics
1.3.6.1.4.1.4526.1.6.1.3.6INTEGER {enable(1), disable(2)}read-writecurrent
agentClearSwitchStats
OBJECT-TYPE
clear all switch statistics
1.3.6.1.4.1.4526.1.6.1.3.7INTEGER {enable(1), disable(2)}read-writecurrent
agentClearTrapLog
OBJECT-TYPE
clear trap log
1.3.6.1.4.1.4526.1.6.1.3.8INTEGER {enable(1), disable(2)}read-writecurrent
agentClearVlan
OBJECT-TYPE
clear vlan entries
1.3.6.1.4.1.4526.1.6.1.3.9INTEGER {enable(1), disable(2)}read-writecurrent
agentResetSystem
OBJECT-TYPE
reset the switch
1.3.6.1.4.1.4526.1.6.1.3.10INTEGER {enable(1), disable(2)}read-writecurrent
agentSaveConfigStatus
OBJECT-TYPE
Indicates the current status of an save configuration request.
1.3.6.1.4.1.4526.1.6.1.3.11INTEGER {notInitiated(1), savingInProcess(2), savingComplete(3)}read-onlycurrent
agentCableTesterGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.4
agentCableTesterStatus
OBJECT-TYPE
Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed. Cannot be set. failure(3) - A failure was encountered during the test. Cannot be set. uninitialized(4) - No test has been performed yet. Cannot be set.
1.3.6.1.4.1.4526.1.6.1.4.1INTEGER {active(1), success(2), failure(3), uninitialized(4)}read-writecurrent
agentCableTesterIfIndex
OBJECT-TYPE
Determines on which port to perform the cable test. Limited to copper based ports.
1.3.6.1.4.1.4526.1.6.1.4.2Unsigned32read-writecurrent
agentCableTesterCableStatus
OBJECT-TYPE
Indicates the results of the Cable Test. normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(3) - There is an electrical short in the cable. unknown(4) - No test has been performed yet, or a test is currently in progress.
1.3.6.1.4.1.4526.1.6.1.4.3INTEGER {normal(1), open(2), short(3), unknown(4)}read-onlycurrent
agentCableTesterMinimumCableLength
OBJECT-TYPE
The estimated length of the cable in meters. This value indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
1.3.6.1.4.1.4526.1.6.1.4.4Unsigned32read-onlycurrent
agentCableTesterMaximumCableLength
OBJECT-TYPE
The estimated length of the cable in meters. This value indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
1.3.6.1.4.1.4526.1.6.1.4.5Unsigned32read-onlycurrent
agentCableTesterCableFailureLocation
OBJECT-TYPE
The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if agentCableTesterStatus is not success(2).
1.3.6.1.4.1.4526.1.6.1.4.6Unsigned32read-onlycurrent
gsm7312SwitchingTraps
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.6.1.50

Notifications

NameOIDStatus
multipleUsersTrap
NOTIFICATION-TYPE
trapMgrMultipleUsersLogTrap.
1.3.6.1.4.1.4526.1.6.1.50.1current
broadcastStormStartTrap
NOTIFICATION-TYPE
trapMgrBCastStormStartLogTrap.
1.3.6.1.4.1.4526.1.6.1.50.2current
broadcastStormEndTrap
NOTIFICATION-TYPE
trapMgrBCastStormEndLogTrap.
1.3.6.1.4.1.4526.1.6.1.50.3current
linkFailureTrap
NOTIFICATION-TYPE
trapMgrLinkFailureLogTrap.
1.3.6.1.4.1.4526.1.6.1.50.4current
vlanRequestFailureTrap
NOTIFICATION-TYPE
trapMgrVlanRequestFailureLogTrap
1.3.6.1.4.1.4526.1.6.1.50.5current
vlanDeleteLastTrap
NOTIFICATION-TYPE
trapMgrLastVlanDeleteLastLogTrap
1.3.6.1.4.1.4526.1.6.1.50.6current
vlanDefaultCfgFailureTrap
NOTIFICATION-TYPE
trapMgrDefaultVlanCfgFailureLogTrap
1.3.6.1.4.1.4526.1.6.1.50.7current
vlanRestoreFailureTrap
NOTIFICATION-TYPE
trapMgrVlanRestoreFailureLogTrap
1.3.6.1.4.1.4526.1.6.1.50.8current
fanFailureTrap
NOTIFICATION-TYPE
trapMgrFanFailureLogTrap.
1.3.6.1.4.1.4526.1.6.1.50.9current
stpInstanceNewRootTrap
NOTIFICATION-TYPE
trapMgrStpInstanceNewRootTrap
1.3.6.1.4.1.4526.1.6.1.50.10current
stpInstanceTopologyChangeTrap
NOTIFICATION-TYPE
trapMgrStpInstanceTopologyChange
1.3.6.1.4.1.4526.1.6.1.50.11current
powerSupplyStatusChangeTrap
NOTIFICATION-TYPE
powerSupplyStatusChangeTrap
1.3.6.1.4.1.4526.1.6.1.50.12current