MIBs Depot

GERP-MIB

Last updated
2008-04-01 00:00
Organization
Greentech MIB Working Group
Revisions
1908-04-01 00:00
Namespace
fs
Source file
GERP-MIB
Digest
sha256:c70bdf83680e039753a69f7ddab4a39db195442e0eb97f6936adbd253ec86bff

Description

The gerp MIB is targeted at easing gerp configuration via snmp tools.

Contact

Email: adama@observium.org

Imports

FromSymbols
GREENTECH-MASTER-MIBgbnL2
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

GERP-MIB
GREENTECH-MASTER-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
gerpMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.4.7.1
gerp
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.4.7.1.1
gerpOnoff
OBJECT-TYPE
Enable/disable gerp function for this bridge.
1.3.6.1.4.1.13464.1.2.4.7.1.1.1INTEGER {enable(1), disable(2)}read-writecurrent
gerpHealthTime
OBJECT-TYPE
The hello timer is used by master or edge node for ring health detection. The correct operational formula: FailedTimer >= 3 * HelloTimer
1.3.6.1.4.1.13464.1.2.4.7.1.1.2Integer32 (1..10)read-writecurrent
gerpHealthTimeout
OBJECT-TYPE
The timeout value used by master during ring health detection. The correct operational formula: FailedTimer >= 3 * HelloTimer
1.3.6.1.4.1.13464.1.2.4.7.1.1.3Integer32 (3..30)read-writecurrent
gerpMajorFaultTime
OBJECT-TYPE
The timeout value used by assitant edge during ring health detection.
1.3.6.1.4.1.13464.1.2.4.7.1.1.4Integer32 (2..29)read-onlycurrent
gerpPrefwdTimeout
OBJECT-TYPE
The block timeout value used by node when portup event occurs.
1.3.6.1.4.1.13464.1.2.4.7.1.1.5Integer32 (3..30)read-onlycurrent
gerpDomainTable
OBJECT-TYPE
A table that contains domain-specific information.
1.3.6.1.4.1.13464.1.2.4.7.1.1.6not-accessiblecurrent
gerpDomainEntry
OBJECT-TYPE
A list of information maintained by every domain.
1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1not-accessiblecurrent
gerpDomainId
OBJECT-TYPE
The domain ID is used when network is managed in unit of domain, one domain should be a set of contiguous bridges.
1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1.1Integer32 (0..15)not-accessiblecurrent
gerpMVlanId
OBJECT-TYPE
The manage VLAN ID of the domain.
1.3.6.1.4.1.13464.1.2.4.7.1.1.6.1.2Integer32 (1..4093)read-writecurrent
gerpRingTable
OBJECT-TYPE
A table that contains domain-and-ring-specific information.
1.3.6.1.4.1.13464.1.2.4.7.1.1.7not-accessiblecurrent
gerpRingEntry
OBJECT-TYPE
A list of information maintained by every ring.
1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1not-accessiblecurrent
gerpRingId
OBJECT-TYPE
The identifier of ethernet ring which reside in a domain.
1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.1Integer32 (0..15)not-accessiblecurrent
gerpRingLevel
OBJECT-TYPE
The ring level,0 means master ring, while 1 means sub ring.
1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.2Integer32 (0..1)read-writecurrent
gerpBrdgRole
OBJECT-TYPE
The bridge role in ethernet ring.
1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.3INTEGER {master(1), trans(2), edge(3), assEdge(4)}read-writecurrent
gerpPriComPortId
OBJECT-TYPE
The primary port id when bridge is master or transmit,the common port id otherwise.
1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.4Integer32 (1..255)read-writecurrent
gerpSecEdgePortId
OBJECT-TYPE
The secondary port id when bridge is master or transmit,the edge port id otherwise.
1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.5Integer32 (1..255)read-writecurrent
gerpRowStatus
OBJECT-TYPE
This object indicates the status of this ring.
1.3.6.1.4.1.13464.1.2.4.7.1.1.7.1.6RowStatus {active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)}read-writecurrent