MIBs Depot

GBNPlatformOAM-MIB

Registered at
1.3.6.1.4.1.13464.1.2.1.1
Last updated
1900-11-02 00:00
Organization
Greentech
Revisions
1900-11-02 00:00
Namespace
fs
Source file
GBNPlatformOAM-MIB
Digest
sha256:297e6a5ae0622fcd0110b7e72f50349c90f53bf74a362062d3ef18715a6d448f

Description

Gbn Common Enterprise MIB definition.

Contact

Adam Armstrong E-mail: adama@observium.org

Imports

FromSymbols
GREENTECH-MASTER-MIBgbnPlatform
Q-BRIDGE-MIBPortList, dot1qStaticMulticastEntry
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

3 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
GBNPlatformOAM-MIB
GREENTECH-MASTER-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.13464.1.2.1.1.8gbnPlatformOAMSntpClientGBNPlatformOAMSntpClient-MIB
1.3.6.1.4.1.13464.1.2.1.1.11gbnPlatformOAMSshGBNPlatformOAMSsh-MIB
1.3.6.1.4.1.13464.1.2.1.1.12gbnPlatformOAMMailalarmGBNPlatformOAMMailalarm-MIB

Textual conventions

NameOIDSyntaxAccessStatus
VctRunResultStatusType
TEXTUAL-CONVENTION
normal¡¢short¡¢open¡¢impedance mismatch
current
VctRunResultTxRxPairNoType
TEXTUAL-CONVENTION
txpair1¡¢rxpair1¡¢txpair2¡¢rxpair2
current

Objects

NameOIDSyntaxAccessStatus
gbnPlatformOAMSysIf
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.1
sysIfMACAddr
OBJECT-TYPE
DURABLE: { '000000000000'H } The base (i.e., first) MAC address used by the gbn agent for its in-band ports.
1.3.6.1.4.1.13464.1.2.1.1.1.1MacAddressread-writecurrent
sysIfIpAddress
OBJECT-TYPE
DURABLE: { '00000000'H } The IP Address for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'.
1.3.6.1.4.1.13464.1.2.1.1.1.2IpAddressread-writecurrent
sysIfIPGateAddress
OBJECT-TYPE
DURABLE: { '00000000'H } The default Gateway Address (i.e., next hop router) for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'.
1.3.6.1.4.1.13464.1.2.1.1.1.3IpAddressread-writecurrent
sysIfIPNetMask
OBJECT-TYPE
DURABLE: { 'ffffff00'H } The IP NetMask for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'.
1.3.6.1.4.1.13464.1.2.1.1.1.4IpAddressread-writecurrent
sysIfIPStatus
OBJECT-TYPE
This object is used to synchronize the modification of the IP parameters used by the protocol stack based on the gbnCommonIP MIB objects. This allows the user to change gbnCommonIPMACAddr, gbnCommonIPIpAddress, gbnCommonIPGateAddress, and gbnCommonIPNetMask, and then apply the changes to the unit using apply(4). If gbnCommonIPStatus returns notModified(1), no modifications were made to any gbnCommonIP MIB objects. If gbnCommonIPStatus returns modified(2), one or more objects were changed, but have not been applied. Both notModified(1) and modified(2) are read-only values; the agent returns a SNMP_BADVALUE for sets using these values. Both restore(3) and apply(4) are valid SET values. If one or more of the gbnCommonIP objects were modified, the user can restore the parameters to a mirror of the NVM values using restore(3).
1.3.6.1.4.1.13464.1.2.1.1.1.5INTEGER {notModified(1), modified(2), restore(3), apply(4)}read-writecurrent
sysIfBOOTPOnOff
OBJECT-TYPE
DURABLE: { disable } Enable/Disable BOOTP operation for the gbn agent. When 'disable(2)', no BOOTPs are transmitted by the Application. When 'enable(1)', the Application sends BOOTP requests during system startup.
1.3.6.1.4.1.13464.1.2.1.1.1.7INTEGER {enable(1), disable(2)}read-writecurrent
sysIfDHCPOnOff
OBJECT-TYPE
DURABLE: { disable } Enable/Disable DHCP operation for the gbn agent. When 'disable(2)', no DHCPs are transmitted by the Application. When enabled, the Application sends DHCP requests during system startup.
1.3.6.1.4.1.13464.1.2.1.1.1.8INTEGER {enable(1), disable(2)}read-writecurrent
sysIfManageVLANTbale
OBJECT-TYPE
ManageVlan table
1.3.6.1.4.1.13464.1.2.1.1.1.9not-accessiblemandatory
sysIfManageVLANEntry
OBJECT-TYPE
ManageVlan entry
1.3.6.1.4.1.13464.1.2.1.1.1.9.1not-accessiblemandatory
sysIfManageVLANVid
OBJECT-TYPE
ManageVLAN-ID, as an index, the maximum number is 26.
1.3.6.1.4.1.13464.1.2.1.1.1.9.1.1INTEGERread-onlycurrent
sysIfManageVLANRowStatus
OBJECT-TYPE
ManageVLAN status
1.3.6.1.4.1.13464.1.2.1.1.1.9.1.2RowStatusread-writecurrent
gbnPlatformOAMSystem
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.2
softwarePlate
OBJECT-TYPE
Software platform used by switches.
1.3.6.1.4.1.13464.1.2.1.1.2.1DisplayString (SIZE(0..100))read-onlycurrent
softwareVersion
OBJECT-TYPE
Software version, the format is V100R001B02D06P03SP3
1.3.6.1.4.1.13464.1.2.1.1.2.2DisplayString (SIZE(0..100))read-onlycurrent
softwareCompiledTimeE
OBJECT-TYPE
Software Compiled time displayed in English, the format is Feburary 17 2003 15:47:00
1.3.6.1.4.1.13464.1.2.1.1.2.3DisplayString (SIZE(0..100))read-onlycurrent
softwareCompiledTimeC
OBJECT-TYPE
Software Compiled time
1.3.6.1.4.1.13464.1.2.1.1.2.4DisplayString (SIZE(0..100))read-onlycurrent
cpuDescription
OBJECT-TYPE
System CPU description, the format is Mips 32334, 133MHz
1.3.6.1.4.1.13464.1.2.1.1.2.5DisplayString (SIZE(0..100))read-onlycurrent
sdramDescription
OBJECT-TYPE
System Memory description, the format is 32M
1.3.6.1.4.1.13464.1.2.1.1.2.6DisplayString (SIZE(0..100))read-onlycurrent
flashDescription
OBJECT-TYPE
System Flash description, the format is 4096k
1.3.6.1.4.1.13464.1.2.1.1.2.7DisplayString (SIZE(0..100))read-onlycurrent
hardwareVersion
OBJECT-TYPE
Hardware version, the format is V3.0
1.3.6.1.4.1.13464.1.2.1.1.2.8DisplayString (SIZE(0..100))read-onlycurrent
bootromVersion
OBJECT-TYPE
Bootrom version, the format is V2.0
1.3.6.1.4.1.13464.1.2.1.1.2.9DisplayString (SIZE(0..100))read-onlycurrent
hostName
OBJECT-TYPE
System host name
1.3.6.1.4.1.13464.1.2.1.1.2.10DisplayString (SIZE(1..32))read-writecurrent
cpuIdle
OBJECT-TYPE
The percentage of free CPU in the current system.
1.3.6.1.4.1.13464.1.2.1.1.2.11INTEGER (0..100)read-onlycurrent
memorySize
OBJECT-TYPE
The current system memory size, unit is byte.
1.3.6.1.4.1.13464.1.2.1.1.2.12Integer32read-onlycurrent
memoryIdle
OBJECT-TYPE
The current system free memory size, unit is byte.
1.3.6.1.4.1.13464.1.2.1.1.2.13Integer32read-onlycurrent
systemClock
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.2.14
clockTime
OBJECT-TYPE
The current calendar time in seconds. The based time is 1979/1/1. Year of the date must be the number between 2000 and 2099
1.3.6.1.4.1.13464.1.2.1.1.2.14.1Unsigned32read-writecurrent
timeZoneName
OBJECT-TYPE
the timezone name,1-32 letters.
1.3.6.1.4.1.13464.1.2.1.1.2.14.2DisplayString (SIZE(1..32))read-writecurrent
timeZoneOffset
OBJECT-TYPE
seconds between current timezone and GMT
1.3.6.1.4.1.13464.1.2.1.1.2.14.3Integer32 (0..86399)read-writecurrent
offsetNegFlag
OBJECT-TYPE
earlier or latter than GMT,it is true when timeZoneOffset is negative
1.3.6.1.4.1.13464.1.2.1.1.2.14.4TruthValueread-writecurrent
productName
OBJECT-TYPE
DURABLE: { 'WindRiver gbn Agent' } The product name associated with this agent. This name is displayed on the console screens and Web pages.
1.3.6.1.4.1.13464.1.2.1.1.2.15DisplayString (SIZE(1..255))read-writecurrent
systemReset
OBJECT-TYPE
Physically performs a hardware reset of the unit. Use with care. A 'reset(2)' resets the unit, a 'resetToDefaults(3)' resets the NVM configuration to factory defaults and then resets the unit, and 'noop(1)' does nothing. A value of 'noop(1)' is always returned for a GET operation.
1.3.6.1.4.1.13464.1.2.1.1.2.16INTEGER {noop(1), reset(2), resetToDefaults(3)}read-writecurrent
writeConfig
OBJECT-TYPE
When set to 'save(2)', config file is saved to NVM (Nonvolatile Memory). NVM save operations may be slow (e.g., erasing/writing Flash device). Consequently, all or many updates should be made before saving to NVM. Note that the SNMP set to 'save(2)' returns immediately to the caller. Gets on this object then return 'saveInProgress(3)' until the save operation completes, at which time 'noop(1)' is returned if the save operation is succeeded, otherwise 'saveFailed(4)' is returned. Consequently, a get operation always returns 'noop(1)', 'saveInProgress(3)' or 'saveFailed(4) depending on the current state and the result of the save operation. The agent returns 'badValue' for SNMPv1 or 'inconsistentValue' for SNMPv2c/v3 for a set to 'Save(2)' while the current get state is 'saveInProgress(3)'. Attempts to set this object to 'saveInProgress(3)' or 'saveFailed(4)' returns 'badValue' for SNMPv1 or 'wrongValue' for SNMPv2c/v3.
1.3.6.1.4.1.13464.1.2.1.1.2.17INTEGER {noop(1), save(2), saveInProgress(3), saveFailed(4)}read-writecurrent
saveNMInterfaceConfig
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.2.18
nmInterfaceId
OBJECT-TYPE
interface id of vlan saved for nm_interface configuration.
1.3.6.1.4.1.13464.1.2.1.1.2.18.1INTEGER (0..4094)read-writecurrent
nmInterfaceIpAddress
OBJECT-TYPE
ip address saved for nm_interface configuration.
1.3.6.1.4.1.13464.1.2.1.1.2.18.2IpAddressread-writecurrent
nmInterfaceNetMask
OBJECT-TYPE
mask saved for nm_interface configuration.
1.3.6.1.4.1.13464.1.2.1.1.2.18.3IpAddressread-writecurrent
nmInterfaceGateAddress
OBJECT-TYPE
gateway address saved for nm_interface configuration.
1.3.6.1.4.1.13464.1.2.1.1.2.18.4IpAddressread-writecurrent
writeNMInterfaceConifig
OBJECT-TYPE
We save the nm_interface configuration through setting this Mib. When setting to 'saveNmconfig(1)', nm_interface configuration is starting to be saved. At the same time the value of writeNMInterfaceConifigStatus Mib is set to 'saveInProgress(2)'. Then the value of nmInterfaceId, nmInterfaceIpAddress, nmInterfaceNetMask, nmInterfaceGateAddress will be read one by one.According to these value, the nm_interface configuration is to be saved. Untill the process was over the value of writeNMInterfaceConifigStatus Mib is changed to 'saveSuccess(1)'. And if the process was ended for exception the value of writeNMInterfaceConifigStatus Mib is set to a error code from 'saveFailed(3)' to 'invalidIpOrMask(11)'.
1.3.6.1.4.1.13464.1.2.1.1.2.18.5INTEGER {saveNmconfig(1)}read-writecurrent
writeNMInterfaceConifigStatus
OBJECT-TYPE
Reserve the status of process in saving Nmconfig.
1.3.6.1.4.1.13464.1.2.1.1.2.18.6INTEGER {saveSuccess(1), saveInProgress(2), saveFailed(3), noInterface(4), noIpAddress(5), differentSubnet(6), noInterfaceParameter(7), noIpAddressParameter(8), noMaskParameter(9), noGatewayParameter(10), invalidIpOrMask(11)}read-onlycurrent
prodSerialNo
OBJECT-TYPE
Product Serial Number
1.3.6.1.4.1.13464.1.2.1.1.2.19DisplayString (SIZE(1..31))read-onlycurrent
cpuBusyStatus
OBJECT-TYPE
CPU busy status
1.3.6.1.4.1.13464.1.2.1.1.2.20TruthValueread-onlycurrent
cpuBusyAlarmEnable
OBJECT-TYPE
the enable status of cpu busy alarm.
1.3.6.1.4.1.13464.1.2.1.1.2.21TruthValue {true(1), false(2)}read-writecurrent
cpuBusyThreshold
OBJECT-TYPE
CPU busy threshold.
1.3.6.1.4.1.13464.1.2.1.1.2.22INTEGER (0..100)read-writecurrent
cpuUnbusyThreshold
OBJECT-TYPE
CPU unbusy threshold.
1.3.6.1.4.1.13464.1.2.1.1.2.23Integer32read-writecurrent
cpuStatusTrap
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.2.24
gbnPlatformOAMIpAccessControl
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.3
ipAccessControlTable
OBJECT-TYPE
IP address access control table.
1.3.6.1.4.1.13464.1.2.1.1.3.1not-accessiblecurrent
ipAccessControlEntry
OBJECT-TYPE
IP address access control entry.
1.3.6.1.4.1.13464.1.2.1.1.3.1.1not-accessiblecurrent
controlIpAddress
OBJECT-TYPE
The accessible ip address of the switch
1.3.6.1.4.1.13464.1.2.1.1.3.1.1.1IpAddressread-onlycurrent
controlIpMask
OBJECT-TYPE
The accessible ip address mask of the switch, wildcard supports mask and unmask
1.3.6.1.4.1.13464.1.2.1.1.3.1.1.2IpAddressread-onlycurrent
controlTeminal
OBJECT-TYPE
The client type connected to switch, snmp(1) means connecting switch by SNMP, web(2) means connecting switch by WEB, telnet(3) means connecting switch by telnet.
1.3.6.1.4.1.13464.1.2.1.1.3.1.1.3INTEGER {snmp(1), web(2), telnet(3)}read-onlycurrent
controlStatus
OBJECT-TYPE
IP address control status, active(1) means adding the ip address to list, destroy(2) means deleting the ip address from list
1.3.6.1.4.1.13464.1.2.1.1.3.1.1.4INTEGER {active(1), destroy(2)}read-writecurrent
gbnPlatformOAMWatchDog
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.4
softDogProxy
OBJECT-TYPE
Enable/disable the soft dog.
1.3.6.1.4.1.13464.1.2.1.1.4.1INTEGER {enable(1), disable(2)}read-writecurrent
gbnPlatformOAMMuser
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.5
musrTable
OBJECT-TYPE
A Table of usr_name and Password.
1.3.6.1.4.1.13464.1.2.1.1.5.1not-accessiblecurrent
musrEntry
OBJECT-TYPE
A list of usr parameters.
1.3.6.1.4.1.13464.1.2.1.1.5.1.1not-accessiblecurrent
musrIndex
OBJECT-TYPE
A simple index into 'gbnCommonUsrTable'.
1.3.6.1.4.1.13464.1.2.1.1.5.1.1.1Integer32 (1..8)not-accessiblecurrent
musrName
OBJECT-TYPE
A simple usrname of gbnCommonUsrEntry.
1.3.6.1.4.1.13464.1.2.1.1.5.1.1.2DisplayString (SIZE(1..32))read-writecurrent
musrPassword
OBJECT-TYPE
A simple password of gbnCommonUsrEntry.
1.3.6.1.4.1.13464.1.2.1.1.5.1.1.3DisplayString (SIZE(1..16))read-writecurrent
musrType
OBJECT-TYPE
DURABLE: { NormalUser } A simple UsrType into 'gbnCommonUsrTable'. when 'NomalUser' configuration is limitted
1.3.6.1.4.1.13464.1.2.1.1.5.1.1.4INTEGER {normalUser(0), superUser(1)}read-writecurrent
musrRowStatus
OBJECT-TYPE
DURABLE: { disable } A simple RowStatus into 'gbnCommonUsrTable'. when 'disable' the user is deleted
1.3.6.1.4.1.13464.1.2.1.1.5.1.1.5INTEGER {enable(1), disable(2)}read-writecurrent
manageUserAuthenType
OBJECT-TYPE
Authentication method 1:local, 2:radius, 3:radius first and then local after failed,4:tacacsplus,5:tacacsplus first, and then local after failed.
1.3.6.1.4.1.13464.1.2.1.1.5.2INTEGER {locacl(1), radius(2), radiusFailLocal(3), tacacsplus(4), tacacsplusFailLocal(5)}read-writecurrent
manageUserAuthenRadiusName
OBJECT-TYPE
radius server name.
1.3.6.1.4.1.13464.1.2.1.1.5.3DisplayString (SIZE(1..32))read-writecurrent
manageUserAuthChallegeType
OBJECT-TYPE
Radius authentication method£¬1:CHAP, 2:PAP.
1.3.6.1.4.1.13464.1.2.1.1.5.4INTEGER {chap(1), pap(2)}read-writecurrent
manageUserTacacsAuthor
OBJECT-TYPE
authorization afer authenticastion.
1.3.6.1.4.1.13464.1.2.1.1.5.5TruthValueread-writecurrent
manageUserTacacsAccount
OBJECT-TYPE
accounting after authorization.
1.3.6.1.4.1.13464.1.2.1.1.5.6TruthValueread-writecurrent
gbnPlatformOAMUpDownLoad
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.6
loadTftpAddress
OBJECT-TYPE
DURABLE: The IP Address for the TFTP server used for downloading and/or uploading files.
1.3.6.1.4.1.13464.1.2.1.1.6.1IpAddressread-writecurrent
loadTftpFileName
OBJECT-TYPE
DURABLE: The TFTP file path and name.
1.3.6.1.4.1.13464.1.2.1.1.6.2DisplayString (SIZE(1..128))read-writecurrent
loadType
OBJECT-TYPE
DURABLE: { application } The type of file to download or upload upon an 'gbnCommonLoadExecute'. application:program file of the switch configuration:configuration file,should be uploaded before you download it. miccode:microcode is the program file of vdsl chip. removed during the boot Flash write operation, the agent cannot be recovered).
1.3.6.1.4.1.13464.1.2.1.1.6.3INTEGER {application(1), normalBootRom(2), configuration(3), bootCode(4), alarm(5), syslog(6), wholeBootRom(7)}read-writecurrent
loadExecute
OBJECT-TYPE
Execute file download or upload procedure. A SET of this object starts the load procedure. Note that the Application and Boot images can only be downloaded. The NVM Configuration file can be uploaded and downloaded. A GET of this object will return the status of the executed operation. Use 'gbnCommonLoadExecuteStatus' to determine the status of the executed load.
1.3.6.1.4.1.13464.1.2.1.1.6.4INTEGER {noop(1), downloadTftp(2), uploadTftp(3), downloadFtp(4), uploadFtp(5), downloadXmodem(6)}read-writecurrent
loadExecuteStatus
OBJECT-TYPE
Provides status on the execute file load progress.
1.3.6.1.4.1.13464.1.2.1.1.6.5INTEGER {notStarted(1), inProgressTftp(2), successTftp(3), errorConnectionTftp(4), errorFilenameTftp(5), errorFaultTftp(6), inProgressFtp(7), successFtp(8), errorConnectionFtp(9), errorFilenameFtp(10), errorFaultFtp(11), inProgressXmodem(12), successXmodem(13), errorConnectionXmodem(14), errorFilenameXmodem(15), errorFaultXmodem(16)}read-onlycurrent
loadFtpAddress
OBJECT-TYPE
DURABLE: The IP Address for the FTP server used for downloading and/or uploading files.
1.3.6.1.4.1.13464.1.2.1.1.6.6IpAddressread-writecurrent
loadFtpFileName
OBJECT-TYPE
DURABLE: The FTP file path and name.
1.3.6.1.4.1.13464.1.2.1.1.6.7DisplayString (SIZE(1..128))read-writecurrent
loadFtpUserName
OBJECT-TYPE
DURABLE: The FTP user name.
1.3.6.1.4.1.13464.1.2.1.1.6.8DisplayString (SIZE(1..64))read-writecurrent
loadFtpUserPassword
OBJECT-TYPE
DURABLE: The FTP user password.
1.3.6.1.4.1.13464.1.2.1.1.6.9DisplayString (SIZE(1..64))read-writecurrent
gbnPlatformOAMSnmp
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.7
snmpCommunityToViewTable
OBJECT-TYPE
A table of SNMPv1/v2c community string to view name mappings.
1.3.6.1.4.1.13464.1.2.1.1.7.1not-accessiblecurrent
snmpCommunityToViewEntry
OBJECT-TYPE
A list of community-to-view parameters.
1.3.6.1.4.1.13464.1.2.1.1.7.1.1not-accessiblecurrent
snmpComm2ViewIndex
OBJECT-TYPE
A simple index into 'gbnCommonCommunityToViewTable'.
1.3.6.1.4.1.13464.1.2.1.1.7.1.1.1Integer32 (1..8)not-accessiblecurrent
snmpComm2ViewCommName
OBJECT-TYPE
DURABLE: { 'public','':all } The SNMPv1/v2c community name string. Duplicate community names are not allowed in this table. Note that a null string is not a valid community name (i.e., a null string forces 'gbnCommonComm2ViewRowStatus' to 'notReady(3)').
1.3.6.1.4.1.13464.1.2.1.1.7.1.1.2DisplayString (SIZE(1..20))read-createcurrent
snmpComm2ViewViewName
OBJECT-TYPE
DURABLE: { 'internet':all } At runtime (i.e., not when this object is SET), this view name is compared to the 'vacmViewTreeFamilyViewName' in the 'vacmViewTreeFamilyTable' (see RFC2575). If a match is found and the varbind(s) specify valid object type and instance, the 'gbnCommonComm2ViewPermission' privilege is permitted. Note that a null string is not a valid view name value. Also note that the value of this object does not have to match an existing entry in the 'vacmViewTreeFamilyTable' (if no match, no access is allowed). Note that the factory default value for this object is 'internet', which allows access to the subtree under '1.3.6.1'.
1.3.6.1.4.1.13464.1.2.1.1.7.1.1.3SnmpAdminString (SIZE(1..32))read-createcurrent
snmpComm2ViewPermission
OBJECT-TYPE
DURABLE: { readWrite:all } This object specifies the type of access allowed. 'readOnly(1)' allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and 'readWrite(2)' allows both GET and SET operations.
1.3.6.1.4.1.13464.1.2.1.1.7.1.1.4INTEGER {readOnly(1), readWrite(2)}read-createcurrent
snmpComm2ViewRowStatus
OBJECT-TYPE
DURABLE: This object indicates the status of this entry. A row in this table can be created using the 'createAndGo(4)' (i.e., all parameters must be valid - supplied in a single SNMP PDU or have default values) or the 'createAndWait(5)' action states. Until all parameters are valid for a conceptual row, this object is 'notReady(3)'. All parameters must be valid before this object can be set to 'active(1)'. Any object in a conceptual row can be modified independent of the value of this object (e.g., can be changed while 'active(1)').
1.3.6.1.4.1.13464.1.2.1.1.7.1.1.5RowStatusread-createcurrent
snmpNotifyTypeTable
OBJECT-TYPE
A table of SNMPv1/v2c notify type .
1.3.6.1.4.1.13464.1.2.1.1.7.2not-accessiblecurrent
snmpNotifyTypeEntry
OBJECT-TYPE
A list of notify type parameters.
1.3.6.1.4.1.13464.1.2.1.1.7.2.1not-accessiblecurrent
snmpPrivateNotifyType
OBJECT-TYPE
notify type.
1.3.6.1.4.1.13464.1.2.1.1.7.2.1.1DisplayString (SIZE(1..32))read-onlycurrent
snmpNotifyTypeStatus
OBJECT-TYPE
It signifies if the traps with corresponding notify-type can be sent.
1.3.6.1.4.1.13464.1.2.1.1.7.2.1.2INTEGER {enable(1), disable(2)}read-writecurrent
gbnPlatformOAMSnmpNotifyType
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.7.3
snmpTrapSource
OBJECT-TYPE
The id of vlan or supervlan which interface traps or informs are sent from belongs to. vlan id: 0-4094; supervlan id: 0-11.
1.3.6.1.4.1.13464.1.2.1.1.7.4INTEGER (0..4094)read-writecurrent
snmpRemoteEngineTable
OBJECT-TYPE
A table of remote engine .
1.3.6.1.4.1.13464.1.2.1.1.7.5not-accessiblecurrent
snmpRemoteEngineEntry
OBJECT-TYPE
A list of remote engine.
1.3.6.1.4.1.13464.1.2.1.1.7.5.1not-accessiblecurrent
snmpRemoteEngineID
OBJECT-TYPE
The remote engine's id.Note that the engine id can only appear once in the table.
1.3.6.1.4.1.13464.1.2.1.1.7.5.1.1DisplayStringnot-accessiblecurrent
snmpRemoteHostTAddr
OBJECT-TYPE
The ip and port number of remote host.Note that the value including ip and port number can only appear once in the table.
1.3.6.1.4.1.13464.1.2.1.1.7.5.1.2OCTET STRING (SIZE(6))read-writecurrent
snmpDeleteRemoteEngineTableRow
OBJECT-TYPE
You can delete a row by setting the value to 'deleteRow(1)'.
1.3.6.1.4.1.13464.1.2.1.1.7.5.1.3INTEGER {deleteRow(1)}read-writecurrent
snmpTrapSourceType
OBJECT-TYPE
The type of the interface which traps or informs are sent from. 1: vlan interface; 2: supervlan interface.
1.3.6.1.4.1.13464.1.2.1.1.7.6INTEGER (1..2)read-writecurrent
gbnPlatformOAMSntpClient
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.8
gbnPlatformOAMSyslog
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.9
gbnPlatformOAMPortCar
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.10
portCarTable
OBJECT-TYPE
A Table of port CAR.
1.3.6.1.4.1.13464.1.2.1.1.10.1not-accessiblecurrent
portCarEntry
OBJECT-TYPE
A list of port CAR.
1.3.6.1.4.1.13464.1.2.1.1.10.1.1not-accessiblecurrent
portCarPort
OBJECT-TYPE
The port number.
1.3.6.1.4.1.13464.1.2.1.1.10.1.1.1Integer32not-accessiblecurrent
portCarEnable
OBJECT-TYPE
The enable status of the port CAR
1.3.6.1.4.1.13464.1.2.1.1.10.1.1.2TruthValueread-writecurrent
portDiscardBpdu
OBJECT-TYPE
The enable status of the port discard BPDU
1.3.6.1.4.1.13464.1.2.1.1.10.1.1.3Integer32 (0..1)read-writecurrent
portCarRateBpdu
OBJECT-TYPE
The port CAR max packet receive rate.
1.3.6.1.4.1.13464.1.2.1.1.10.1.1.4Integer32read-writecurrent
portCarGlobalEnable
OBJECT-TYPE
The global enable status of port CAR.
1.3.6.1.4.1.13464.1.2.1.1.10.2TruthValueread-writecurrent
portCarOpenTime
OBJECT-TYPE
The closed port Re-open time.
1.3.6.1.4.1.13464.1.2.1.1.10.3Integer32read-writecurrent
discardBpdu
OBJECT-TYPE
The global enable status of port discard BPDU.
1.3.6.1.4.1.13464.1.2.1.1.10.4Integer32 (0..1)read-writecurrent
portCarRate
OBJECT-TYPE
The port CAR max packet receive rate.
1.3.6.1.4.1.13464.1.2.1.1.10.5Integer32read-writecurrent
gbnPlatformOAMSsh
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.11
gbnPlatformOAMMailalarm
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.12
gbnPlatformOAMVctRun
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.13
vctRunTable
OBJECT-TYPE
A Table of VCT run.
1.3.6.1.4.1.13464.1.2.1.1.13.1not-accessiblecurrent
vctRunEntry
OBJECT-TYPE
A list of VCT run.
1.3.6.1.4.1.13464.1.2.1.1.13.1.1not-accessiblecurrent
vctRunPort
OBJECT-TYPE
The port number.
1.3.6.1.4.1.13464.1.2.1.1.13.1.1.1Integer32 (1..24)not-accessiblecurrent
vctRunEnable
OBJECT-TYPE
The enable status of the VCT run
1.3.6.1.4.1.13464.1.2.1.1.13.1.1.2TruthValueread-writecurrent
vctAutoRunEnable
OBJECT-TYPE
The enable status of the VCT auto run
1.3.6.1.4.1.13464.1.2.1.1.13.1.1.3TruthValueread-writecurrent
vctAutoRunGlobalEnable
OBJECT-TYPE
The global enable status of VCT auto run.
1.3.6.1.4.1.13464.1.2.1.1.13.2TruthValueread-writecurrent
gbnPlatformOAMVctRunResult
OBJECT-IDENTITY
1.3.6.1.4.1.13464.1.2.1.1.14
vctRunResultTable
OBJECT-TYPE
A Table of VCT run result.
1.3.6.1.4.1.13464.1.2.1.1.14.1not-accessiblecurrent
vctRunResultEntry
OBJECT-TYPE
A list of VCT run result.
1.3.6.1.4.1.13464.1.2.1.1.14.1.1not-accessiblecurrent
vctRunResultPort
OBJECT-TYPE
The port number.
1.3.6.1.4.1.13464.1.2.1.1.14.1.1.1Integer32 (1..24)not-accessiblecurrent
vctRunResultTxRxPairNo
OBJECT-TYPE
The tx rx pair NO.
1.3.6.1.4.1.13464.1.2.1.1.14.1.1.2VctRunResultTxRxPairNoTypenot-accessiblecurrent
vctRunResultStatus
OBJECT-TYPE
The status of the VCT run result
1.3.6.1.4.1.13464.1.2.1.1.14.1.1.3VctRunResultStatusTyperead-onlycurrent
vctRunResultErrorLocation
OBJECT-TYPE
The error location of the VCT run result
1.3.6.1.4.1.13464.1.2.1.1.14.1.1.4Integer32read-onlycurrent

Notifications

NameOIDStatus
cpuBusyTrap
NOTIFICATION-TYPE
cpu busy trap.
1.3.6.1.4.1.13464.1.2.1.1.2.24.1current
cpuUnbusyTrap
NOTIFICATION-TYPE
cpu unbusy trap.
1.3.6.1.4.1.13464.1.2.1.1.2.24.2current
snmpNotifyTypeSaveConfiguration
NOTIFICATION-TYPE
A private type for traps or informs. It signifies that the SNMPv2 entity have just saved the configuration.
1.3.6.1.4.1.13464.1.2.1.1.7.3.1current