MIBs Depot

G6-HARDWARE-MIB

Registered at
1.3.6.1.4.1.3181.10.6.1.31
Last updated
2015-05-22 10:59
Organization
MICROSENS GmbH & Co. KG
Revisions
2015-05-22 10:59
Namespace
microsens
Source file
G6-HARDWARE-MIB
Digest
sha256:8fe399b7b3e4566468b7f269a5e82caaec919773b5eb680805c4a06d88937fcf

Description

Microsens private MIB for Generation 6 Ethernet Switches

Contact

Kueferstrasse 16 D-59067 Hamm Germany support@microsens.de http://www.microsens.de

Imports

FromSymbols
MICROSENS-G6-MIBg6
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

G6-HARDWARE-MIB
MICROSENS-G6-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
hardware
OBJECT-IDENTITY
1.3.6.1.4.1.3181.10.6.1.31
hardwareLedTest
OBJECT-TYPE
Runs a leds test whereby all LED light up in all possible colors for checking their function. The tests terminates within a few seconds.
1.3.6.1.4.1.3181.10.6.1.31.1DisplayStringread-writecurrent
hardwareLedMode
OBJECT-TYPE
The LED display can be configured to be less intrusive.
1.3.6.1.4.1.3181.10.6.1.31.2INTEGER {dynamic(0), static(1), quiet(2), dark(3), lightshow(4)}read-writecurrent
hardwarePowerSupply1Monitored
OBJECT-TYPE
When disabled a missing power supply 1 will not turn the associated led red on failure. Do this when single power supply 2 operation is used or when the device is powered soley by PoE. This feature only applies to industrial switches.
1.3.6.1.4.1.3181.10.6.1.31.3INTEGER {disabled(0), enabled(1)}read-writecurrent
hardwarePowerSupply2Monitored
OBJECT-TYPE
When disabled a missing power supply 2 will not turn the associated led red on failure. Do this when single power supply 1 operation is used or when the device is powered soley by PoE. This feature only applies to industrial switches.
1.3.6.1.4.1.3181.10.6.1.31.4INTEGER {disabled(0), enabled(1)}read-writecurrent
hardwareFactoryResetButton
OBJECT-TYPE
When disabled the factory button will trigger the factory reset function when pressed for a long time. The IP discover function upon a short button click is not affected.
1.3.6.1.4.1.3181.10.6.1.31.5INTEGER {disabled(0), enabled(1)}read-writecurrent
cableTestConfigTable
OBJECT-TYPE
The cable tester allows for detection of copper cable faults and can even detect where the fault is located.
1.3.6.1.4.1.3181.10.6.1.31.6not-accessiblecurrent
cableTestConfigEntry
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.6.1not-accessiblecurrent
cableTestConfigPortIndex
OBJECT-TYPE
Automatically generated
1.3.6.1.4.1.3181.10.6.1.31.6.1.1INTEGER (0..24)not-accessiblecurrent
cableTestConfigEnableAutoCableTest
OBJECT-TYPE
When enabled a cable test is performed each time the link goes down. The test is only performed for copper ports or dual media ports in copper mode.
1.3.6.1.4.1.3181.10.6.1.31.6.1.2INTEGER {disabled(0), enabled(1)}read-writecurrent
cableTestConfigEventGeneration
OBJECT-TYPE
When the cable termination status changes an event can be raised.
1.3.6.1.4.1.3181.10.6.1.31.6.1.3INTEGER {disabled(0), anyChange(1), cableUnplugged(2)}read-writecurrent
cableTestConfigStartTestNow
OBJECT-TYPE
May be used to manually start a cable test. ATTENTION: If the port is in link up status it will be forced to link down first. This will disrupt the current data traffic. Therefore, type start_test_now = CONFIRM.
1.3.6.1.4.1.3181.10.6.1.31.6.1.4DisplayStringread-writecurrent
ioSignalConfigTable
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.7not-accessiblecurrent
ioSignalConfigEntry
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.7.1not-accessiblecurrent
ioSignalConfigIndex
OBJECT-TYPE
Automatically generated
1.3.6.1.4.1.3181.10.6.1.31.7.1.1INTEGER (0)not-accessiblecurrent
ioSignalConfigSignalMode
OBJECT-TYPE
Permit setting of io signal LEDs and relays to static or blink blink mode for increased visualization.
1.3.6.1.4.1.3181.10.6.1.31.7.1.2INTEGER {static(0), ledBlink(1), relayBlink(2)}read-writecurrent
ioSignalConfigInput1Mode
OBJECT-TYPE
When this function is activated the external alarm input 1 is monitored. Note: alarm inputs are not available in all product versions.
1.3.6.1.4.1.3181.10.6.1.31.7.1.3INTEGER {disabled(0), alarmWhenHigh(1), alarmWhenLow(2)}read-writecurrent
ioSignalConfigInput1Name
OBJECT-TYPE
A customer specific name can be specified for input 1. This name will appear in the associated event messages.
1.3.6.1.4.1.3181.10.6.1.31.7.1.4DisplayStringread-writecurrent
ioSignalConfigInput2Mode
OBJECT-TYPE
When this function is activated the external alarm input 2 is monitored. Note: alarm inputs are not available in all product versions.
1.3.6.1.4.1.3181.10.6.1.31.7.1.5INTEGER {disabled(0), alarmWhenHigh(1), alarmWhenLow(2)}read-writecurrent
ioSignalConfigInput2Name
OBJECT-TYPE
A customer specific name can be specified for input 2. This name will appear in the associated event messages.
1.3.6.1.4.1.3181.10.6.1.31.7.1.6DisplayStringread-writecurrent
ioSignalConfigOutput1Trigger
OBJECT-TYPE
Defines on which condition the alarm relay 1 is activated. Note: alarm relays are not available in all product versions.
1.3.6.1.4.1.3181.10.6.1.31.7.1.7INTEGER {disabled(0), whileRunning(1), redundancyFail(2), highTemp(3), off(4), on(5)}read-writecurrent
ioSignalConfigOutput1Name
OBJECT-TYPE
A customer specific name can be specified for alarm output 1. This name will appear in the associated event messages.
1.3.6.1.4.1.3181.10.6.1.31.7.1.8DisplayStringread-writecurrent
ioSignalConfigOutput2Trigger
OBJECT-TYPE
Defines on which condition the alarm relay 2 is activated. Note: alarm relays are not available in all product versions.
1.3.6.1.4.1.3181.10.6.1.31.7.1.9INTEGER {disabled(0), whileRunning(1), redundancyFail(2), highTemp(3), off(4), on(5)}read-writecurrent
ioSignalConfigOutput2Name
OBJECT-TYPE
A customer specific name can be specified for alarm output 2. This name will appear in the associated event messages.
1.3.6.1.4.1.3181.10.6.1.31.7.1.10DisplayStringread-writecurrent
hardwarePowerSupply1Status
OBJECT-TYPE
Displays state of primary supply or only supply for single supply systems.
1.3.6.1.4.1.3181.10.6.1.31.100INTEGER {ok(0), overload(1), inputLow(2), fuseFail(3), notApplicable(4), unmanaged(5), notInstalled(6)}read-onlycurrent
hardwarePowerSupply2Status
OBJECT-TYPE
Displays state of secondary supply if available.
1.3.6.1.4.1.3181.10.6.1.31.101INTEGER {ok(0), overload(1), inputLow(2), fuseFail(3), notApplicable(4), unmanaged(5), notInstalled(6)}read-onlycurrent
hardwareRunningOnPoe
OBJECT-TYPE
When set the unit currently operates on the PD input via PoE.
1.3.6.1.4.1.3181.10.6.1.31.102INTEGER {false(0), true(1)}read-onlycurrent
hardwareFanStatus
OBJECT-TYPE
Displays state of cooling fan. Indicates UNUSED in fanless devices.
1.3.6.1.4.1.3181.10.6.1.31.103INTEGER {unused(0), ok(1), degraded(2), fail(3), missing(4)}read-onlycurrent
hardwareSdCardStatus
OBJECT-TYPE
Current status of SD-card.
1.3.6.1.4.1.3181.10.6.1.31.104INTEGER {empty(0), inserted(1), writeProtected(2), writing(3)}read-onlycurrent
hardwareNumOfPorts
OBJECT-TYPE
Total number of Ethernet ports this hardware offers.
1.3.6.1.4.1.3181.10.6.1.31.105Integer32 (0..255)read-onlycurrent
hardwareMaskOfExistingPorts
OBJECT-TYPE
Set bit for each port that physically exisiting and could be in use.
1.3.6.1.4.1.3181.10.6.1.31.106INTEGERread-onlycurrent
hardwareMaskOfSfpPorts
OBJECT-TYPE
Marks which ports support SFPs.
1.3.6.1.4.1.3181.10.6.1.31.107INTEGERread-onlycurrent
hardwareMaskOfPoePorts
OBJECT-TYPE
Marks which ports support PoE output.
1.3.6.1.4.1.3181.10.6.1.31.108INTEGERread-onlycurrent
moduleInfoTable
OBJECT-TYPE
This section indicates which modules are inserted in the optional extension slots.
1.3.6.1.4.1.3181.10.6.1.31.109not-accessiblecurrent
moduleInfoEntry
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.109.1not-accessiblecurrent
moduleInfoIndex
OBJECT-TYPE
Automatically generated
1.3.6.1.4.1.3181.10.6.1.31.109.1.1INTEGER (0..3)not-accessiblecurrent
moduleInfoUnitType
OBJECT-TYPE
Identfies the general type of module.
1.3.6.1.4.1.3181.10.6.1.31.109.1.2INTEGER {notPresent(0), baseUnit(1), extension(2)}read-onlycurrent
moduleInfoArticleNumber
OBJECT-TYPE
The article number of the module in this slot.
1.3.6.1.4.1.3181.10.6.1.31.109.1.3DisplayStringread-onlycurrent
moduleInfoSerialNumber
OBJECT-TYPE
The serial number of the module in this slot.
1.3.6.1.4.1.3181.10.6.1.31.109.1.4DisplayStringread-onlycurrent
moduleInfoHardwareVersion
OBJECT-TYPE
This device hardware revision number.
1.3.6.1.4.1.3181.10.6.1.31.109.1.5DisplayStringread-onlycurrent
moduleInfoProjectNumber
OBJECT-TYPE
MICROSENS project number.
1.3.6.1.4.1.3181.10.6.1.31.109.1.6DisplayStringread-onlycurrent
moduleInfoOccupiedSlots
OBJECT-TYPE
Lists all slots contained in this module.
1.3.6.1.4.1.3181.10.6.1.31.109.1.7DisplayStringread-onlycurrent
moduleInfoDescription
OBJECT-TYPE
Feature summary of the module.
1.3.6.1.4.1.3181.10.6.1.31.109.1.8DisplayStringread-onlycurrent
slotInfoTable
OBJECT-TYPE
This section indicates which modules are inserted in the optional extension slots.
1.3.6.1.4.1.3181.10.6.1.31.110not-accessiblecurrent
slotInfoEntry
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.110.1not-accessiblecurrent
slotInfoIndex
OBJECT-TYPE
Automatically generated
1.3.6.1.4.1.3181.10.6.1.31.110.1.1INTEGER (0..7)not-accessiblecurrent
slotInfoBoardType
OBJECT-TYPE
General type of board function
1.3.6.1.4.1.3181.10.6.1.31.110.1.2INTEGER {notPresent(0), undefined(1), power(2), cpu(3), port(4), io(5)}read-onlycurrent
slotInfoBoardId
OBJECT-TYPE
This identifies the board type for internal operation.
1.3.6.1.4.1.3181.10.6.1.31.110.1.3Unsigned32read-onlycurrent
slotInfoVersionBits
OBJECT-TYPE
Version bits from hardware or backplane.
1.3.6.1.4.1.3181.10.6.1.31.110.1.4Integer32 (0..255)read-onlycurrent
portInfoTable
OBJECT-TYPE
Used to map physical to logical port ids.
1.3.6.1.4.1.3181.10.6.1.31.111not-accessiblecurrent
portInfoEntry
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.111.1not-accessiblecurrent
portInfoPortIndex
OBJECT-TYPE
Automatically generated
1.3.6.1.4.1.3181.10.6.1.31.111.1.1INTEGER (0..24)not-accessiblecurrent
portInfoSystemSlot
OBJECT-TYPE
Describes on which system slot this port index is located.
1.3.6.1.4.1.3181.10.6.1.31.111.1.2Integer32 (0..255)read-onlycurrent
portInfoSwitchPort
OBJECT-TYPE
Describes on which switch port this port index is located.
1.3.6.1.4.1.3181.10.6.1.31.111.1.3Integer32 (0..255)read-onlycurrent
portInfoUserSlot
OBJECT-TYPE
Slot number as seen by customer.
1.3.6.1.4.1.3181.10.6.1.31.111.1.4Integer32 (0..255)read-onlycurrent
portInfoUserPort
OBJECT-TYPE
Port number as seen by customer.
1.3.6.1.4.1.3181.10.6.1.31.111.1.5Integer32 (0..255)read-onlycurrent
portInfoSnmpPort
OBJECT-TYPE
Slot and port representation as used in SNMP. Formula is Slot*100 + Port.
1.3.6.1.4.1.3181.10.6.1.31.111.1.6Integer32 (0..65535)read-onlycurrent
portInfoSnmpInstance
OBJECT-TYPE
Port instance counting from 0 to number of ports
1.3.6.1.4.1.3181.10.6.1.31.111.1.7Integer32 (0..255)read-onlycurrent
portInfoHardwarePort
OBJECT-TYPE
Port number as used internally. Ports may not be in sequential order.
1.3.6.1.4.1.3181.10.6.1.31.111.1.8Integer32 (0..255)read-onlycurrent
portInfoInterfaceType
OBJECT-TYPE
Identifies port as copper or optical. Also used for snmp ifType definition
1.3.6.1.4.1.3181.10.6.1.31.111.1.9INTEGER {copper(0), optical(1), dualMedia(2)}read-onlycurrent
portInfoProperties
OBJECT-TYPE
Describes which functions the port can support.
1.3.6.1.4.1.3181.10.6.1.31.111.1.10Bits {internal(0), ms10Mb(1), ms100Mb(2), ms1000Mb(3), rj45(4), sfp(5), ms1x9(6), poe(7), poePlus(8), pd(9), dualMedia(10), linkPort(11), csfp(12)}read-onlycurrent
portLedsTable
OBJECT-TYPE
This section indicates the state of all port related LEDs.
1.3.6.1.4.1.3181.10.6.1.31.112not-accessiblecurrent
portLedsEntry
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.112.1not-accessiblecurrent
portLedsPortIndex
OBJECT-TYPE
Automatically generated
1.3.6.1.4.1.3181.10.6.1.31.112.1.1INTEGER (0..31)not-accessiblecurrent
portLedsEthernetColor
OBJECT-TYPE
Ethernet Link LED.
1.3.6.1.4.1.3181.10.6.1.31.112.1.2INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
portLedsEthernetBlinking
OBJECT-TYPE
Ethernet Link LED.
1.3.6.1.4.1.3181.10.6.1.31.112.1.3INTEGER {false(0), true(1)}read-onlycurrent
portLedsPoeColor
OBJECT-TYPE
Power over Ethernet LED. For optical ports this indicates signal detect status.
1.3.6.1.4.1.3181.10.6.1.31.112.1.4INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
portLedsPoeBlinking
OBJECT-TYPE
Power over Ethernet LED. For optical ports this indicates signal detect status.
1.3.6.1.4.1.3181.10.6.1.31.112.1.5INTEGER {false(0), true(1)}read-onlycurrent
deviceLedsTable
OBJECT-TYPE
This section indicates the state of all LEDs which are not port related. Please note: Not every unit offers all LEDs.
1.3.6.1.4.1.3181.10.6.1.31.113not-accessiblecurrent
deviceLedsEntry
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.113.1not-accessiblecurrent
deviceLedsIndex
OBJECT-TYPE
Automatically generated
1.3.6.1.4.1.3181.10.6.1.31.113.1.1INTEGER (0)not-accessiblecurrent
deviceLedsSystem1Color
OBJECT-TYPE
This status corresponds to 'sys' LED on some devices.
1.3.6.1.4.1.3181.10.6.1.31.113.1.2INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
deviceLedsSystem1Blinking
OBJECT-TYPE
This status corresponds to 'sys' LED on some devices.
1.3.6.1.4.1.3181.10.6.1.31.113.1.3INTEGER {false(0), true(1)}read-onlycurrent
deviceLedsSystem2Color
OBJECT-TYPE
Displays external management activity.
1.3.6.1.4.1.3181.10.6.1.31.113.1.4INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
deviceLedsSystem2Blinking
OBJECT-TYPE
Displays external management activity.
1.3.6.1.4.1.3181.10.6.1.31.113.1.5INTEGER {false(0), true(1)}read-onlycurrent
deviceLedsPowerOn1Color
OBJECT-TYPE
This status corresponds to 'on' LED on some devices.
1.3.6.1.4.1.3181.10.6.1.31.113.1.6INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
deviceLedsPowerOn1Blinking
OBJECT-TYPE
This status corresponds to 'on' LED on some devices.
1.3.6.1.4.1.3181.10.6.1.31.113.1.7INTEGER {false(0), true(1)}read-onlycurrent
deviceLedsPowerOn2Color
OBJECT-TYPE
Alternative power input LED.
1.3.6.1.4.1.3181.10.6.1.31.113.1.8INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
deviceLedsPowerOn2Blinking
OBJECT-TYPE
Alternative power input LED.
1.3.6.1.4.1.3181.10.6.1.31.113.1.9INTEGER {false(0), true(1)}read-onlycurrent
deviceLedsRing1Color
OBJECT-TYPE
This LED is used when ring protection is enabled.
1.3.6.1.4.1.3181.10.6.1.31.113.1.10INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
deviceLedsRing1Blinking
OBJECT-TYPE
This LED is used when ring protection is enabled.
1.3.6.1.4.1.3181.10.6.1.31.113.1.11INTEGER {false(0), true(1)}read-onlycurrent
deviceLedsRing2Color
OBJECT-TYPE
This LED is used when ring protection is enabled.
1.3.6.1.4.1.3181.10.6.1.31.113.1.12INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
deviceLedsRing2Blinking
OBJECT-TYPE
This LED is used when ring protection is enabled.
1.3.6.1.4.1.3181.10.6.1.31.113.1.13INTEGER {false(0), true(1)}read-onlycurrent
deviceLedsSignalIn1Color
OBJECT-TYPE
Indicates status of alarm input 1.
1.3.6.1.4.1.3181.10.6.1.31.113.1.14INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
deviceLedsSignalIn1Blinking
OBJECT-TYPE
Indicates status of alarm input 1.
1.3.6.1.4.1.3181.10.6.1.31.113.1.15INTEGER {false(0), true(1)}read-onlycurrent
deviceLedsSignalIn2Color
OBJECT-TYPE
Indicates status of alarm input 2.
1.3.6.1.4.1.3181.10.6.1.31.113.1.16INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
deviceLedsSignalIn2Blinking
OBJECT-TYPE
Indicates status of alarm input 2.
1.3.6.1.4.1.3181.10.6.1.31.113.1.17INTEGER {false(0), true(1)}read-onlycurrent
deviceLedsSignalOut1Color
OBJECT-TYPE
Indicates status of alarm relay output 1.
1.3.6.1.4.1.3181.10.6.1.31.113.1.18INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
deviceLedsSignalOut1Blinking
OBJECT-TYPE
Indicates status of alarm relay output 1.
1.3.6.1.4.1.3181.10.6.1.31.113.1.19INTEGER {false(0), true(1)}read-onlycurrent
deviceLedsSignalOut2Color
OBJECT-TYPE
Indicates status of alarm relay output 2.
1.3.6.1.4.1.3181.10.6.1.31.113.1.20INTEGER {off(0), blue(1), green(2), red(3), orange(4), cyan(5), magenta(6), white(7), noLed(8)}read-onlycurrent
deviceLedsSignalOut2Blinking
OBJECT-TYPE
Indicates status of alarm relay output 2.
1.3.6.1.4.1.3181.10.6.1.31.113.1.21INTEGER {false(0), true(1)}read-onlycurrent
cableTestStatusTable
OBJECT-TYPE
This table display the result of the last cable test. Values are only available for copper ports while a link is down and if the cable test function is enabled.
1.3.6.1.4.1.3181.10.6.1.31.114not-accessiblecurrent
cableTestStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.114.1not-accessiblecurrent
cableTestStatusPortIndex
OBJECT-TYPE
Automatically generated
1.3.6.1.4.1.3181.10.6.1.31.114.1.1INTEGER (0..24)not-accessiblecurrent
cableTestStatusUpdateTimeStamp
OBJECT-TYPE
Indicates the time when this record was last updated.
1.3.6.1.4.1.3181.10.6.1.31.114.1.2DisplayStringread-onlycurrent
cableTestStatusPair0State
OBJECT-TYPE
Indicates line termination test results for wire pair 0 (Pins 1/2)
1.3.6.1.4.1.3181.10.6.1.31.114.1.3INTEGER {notAvailable(0), pairOk(1), pairOpen(2), samePairShort(3), crossPairShort(4)}read-onlycurrent
cableTestStatusPair0DistanceToFault
OBJECT-TYPE
Distance to fault on wire pair 0 in centimeters. Indicates 0 when no fault is detected or the function is unused.
1.3.6.1.4.1.3181.10.6.1.31.114.1.4Integer32 (0..65535)read-onlycurrent
cableTestStatusPair1State
OBJECT-TYPE
Indicates line termination test results for wire pair 1 (Pins 3/6)
1.3.6.1.4.1.3181.10.6.1.31.114.1.5INTEGER {notAvailable(0), pairOk(1), pairOpen(2), samePairShort(3), crossPairShort(4)}read-onlycurrent
cableTestStatusPair1DistanceToFault
OBJECT-TYPE
Distance to fault on wire pair 1 in centimeters. Indicates 0 when no fault is detected or the function is unused.
1.3.6.1.4.1.3181.10.6.1.31.114.1.6Integer32 (0..65535)read-onlycurrent
cableTestStatusPair2State
OBJECT-TYPE
Indicates line termination test results for wire pair 2 (Pins 4/5)
1.3.6.1.4.1.3181.10.6.1.31.114.1.7INTEGER {notAvailable(0), pairOk(1), pairOpen(2), samePairShort(3), crossPairShort(4)}read-onlycurrent
cableTestStatusPair2DistanceToFault
OBJECT-TYPE
Distance to fault on wire pair 2 in centimeters. Indicates 0 when no fault is detected or the function is unused.
1.3.6.1.4.1.3181.10.6.1.31.114.1.8Integer32 (0..65535)read-onlycurrent
cableTestStatusPair3State
OBJECT-TYPE
Indicates line termination test results for wire pair 3 (Pins 7/8)
1.3.6.1.4.1.3181.10.6.1.31.114.1.9INTEGER {notAvailable(0), pairOk(1), pairOpen(2), samePairShort(3), crossPairShort(4)}read-onlycurrent
cableTestStatusPair3DistanceToFault
OBJECT-TYPE
Distance to fault on wire pair 3 in centimeters. Indicates 0 when no fault is detected or the function is unused.
1.3.6.1.4.1.3181.10.6.1.31.114.1.10Integer32 (0..65535)read-onlycurrent
cableTestStatusCableStatus
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.114.1.11INTEGER {notAvailable(0), pluggedIn(1), open(2)}read-onlycurrent
ioSignalStatusTable
OBJECT-TYPE
This section is only used for devices which offer external signal inputs and outputs.
1.3.6.1.4.1.3181.10.6.1.31.115not-accessiblecurrent
ioSignalStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.115.1not-accessiblecurrent
ioSignalStatusIndex
OBJECT-TYPE
Automatically generated
1.3.6.1.4.1.3181.10.6.1.31.115.1.1INTEGER (0)not-accessiblecurrent
ioSignalStatusInput1AlarmActive
OBJECT-TYPE
Indicates true when the input 1 is logically active.
1.3.6.1.4.1.3181.10.6.1.31.115.1.2INTEGER {false(0), true(1)}read-onlycurrent
ioSignalStatusInput2AlarmActive
OBJECT-TYPE
Indicates true when the input 2 is logically active.
1.3.6.1.4.1.3181.10.6.1.31.115.1.3INTEGER {false(0), true(1)}read-onlycurrent
ioSignalStatusOutput1RelayActive
OBJECT-TYPE
Indicates true when the output 1 relay is activated.
1.3.6.1.4.1.3181.10.6.1.31.115.1.4INTEGER {false(0), true(1)}read-onlycurrent
ioSignalStatusOutput2RelayActive
OBJECT-TYPE
Indicates true when the output 2 relay is activated.
1.3.6.1.4.1.3181.10.6.1.31.115.1.5INTEGER {false(0), true(1)}read-onlycurrent
tcamStatusTable
OBJECT-TYPE
This section is only used for devices which offer external signal inputs and outputs.
1.3.6.1.4.1.3181.10.6.1.31.116not-accessiblecurrent
tcamStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.3181.10.6.1.31.116.1not-accessiblecurrent
tcamStatusIndex
OBJECT-TYPE
Automatically generated
1.3.6.1.4.1.3181.10.6.1.31.116.1.1INTEGER (0..255)not-accessiblecurrent
tcamStatusControlFile
OBJECT-TYPE
Reflects the name of the control file associated with this tcam entry.
1.3.6.1.4.1.3181.10.6.1.31.116.1.2DisplayStringread-onlycurrent
tcamStatusDescription
OBJECT-TYPE
Descriptive text what explains what this tcam entry will do.
1.3.6.1.4.1.3181.10.6.1.31.116.1.3DisplayStringread-onlycurrent