MIBs Depot

FSM726S-MIB

Registered at
1.3.6.1.4.1.4526.1.1.1
1.3.6.1.4.1.4526.1.1.2
1.3.6.1.4.1.4526.1.1.3
1.3.6.1.4.1.4526.1.1.4
1.3.6.1.4.1.4526.1.1.11
1.3.6.1.4.1.4526.1.1.13
1.3.6.1.4.1.4526.1.1.14
Namespace
netgear
Source file
FSM726S-MIB
Digest
sha256:dd26a3564bd754a87dec7084f9c5b36b462b86eb15ac57baf1434e4038471807

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso, mib-2
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

FSM726S-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
MacAddress
type
OwnerString
type

Objects

NameOIDSyntaxAccessStatus
netgear
OBJECT-IDENTITY
1.3.6.1.4.1.4526
snmpManagedSwitch
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1
fsm726s
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.1
netgearCommGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.1.1
commTable
OBJECT-TYPE
A list of SNMP Community Entries
1.3.6.1.4.1.4526.1.1.1.1not-accessiblemandatory
commEntry
OBJECT-TYPE
A list of SNMP Community properties
1.3.6.1.4.1.4526.1.1.1.1.1not-accessiblemandatory
commIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the Community Table. Eight entries are currently supported.
1.3.6.1.4.1.4526.1.1.1.1.1.1INTEGER (1..8)read-onlymandatory
commName
OBJECT-TYPE
The name of this SNMP Community Entry.
1.3.6.1.4.1.4526.1.1.1.1.1.2DisplayString (SIZE(0..31))read-writemandatory
commGet
OBJECT-TYPE
The GET permission for the community. A (1) indicates a GET enable. A (2) indicates a GET disable.
1.3.6.1.4.1.4526.1.1.1.1.1.3INTEGER {enabled(1), disabled(2)}read-writemandatory
commSet
OBJECT-TYPE
The SET permission for the community. A (1) indicates a SET enable. A (2) indicates a SET disable.
1.3.6.1.4.1.4526.1.1.1.1.1.4INTEGER {enabled(1), disabled(2)}read-writemandatory
commTrap
OBJECT-TYPE
The TRAP permission for the community. A (1) indicates a TRAP enable. A (2) indicates a TRAP disable.
1.3.6.1.4.1.4526.1.1.1.1.1.5INTEGER {enabled(1), disabled(2)}read-writemandatory
commStatus
OBJECT-TYPE
The RowStatus for the community entry.
1.3.6.1.4.1.4526.1.1.1.1.1.6INTEGER (1..6)read-writemandatory
netgearHostGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.1.2
hostTable
OBJECT-TYPE
A list of SNMP Trusted Host Entries
1.3.6.1.4.1.4526.1.1.2.1not-accessiblemandatory
hostEntry
OBJECT-TYPE
A list of SNMP Host properties
1.3.6.1.4.1.4526.1.1.2.1.1not-accessiblemandatory
hostIndex
OBJECT-TYPE
An index that uniquely identifies an entry in the Host Table. Sixteen entries are currently supported.
1.3.6.1.4.1.4526.1.1.2.1.1.1INTEGER (1..16)read-onlymandatory
hostName
OBJECT-TYPE
The name of this Host Entry.
1.3.6.1.4.1.4526.1.1.2.1.1.2DisplayString (SIZE(0..31))read-writemandatory
hostIP
OBJECT-TYPE
The IP Address for the host.
1.3.6.1.4.1.4526.1.1.2.1.1.3IpAddressread-writemandatory
hostComm
OBJECT-TYPE
The name of the community this host belongs to.
1.3.6.1.4.1.4526.1.1.2.1.1.4DisplayString (SIZE(0..31))read-writemandatory
hostStatus
OBJECT-TYPE
The RowStatus for the community entry.
1.3.6.1.4.1.4526.1.1.2.1.1.5INTEGER (1..6)read-writemandatory
netgearMiscGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.1.3
miscReset
OBJECT-TYPE
Physically resets the unit - use with care. A (1) resets the unit, a (2) does nothing.
1.3.6.1.4.1.4526.1.1.3.2INTEGER {reset(1), noop(2)}read-writemandatory
miscStatisticsReset
OBJECT-TYPE
Resets the units statistics. A (1) resets the unit, a (2) does nothing.
1.3.6.1.4.1.4526.1.1.3.3INTEGER {reset(1), noop(2)}read-writemandatory
netgearSpanGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.1.4
spanOnOff
OBJECT-TYPE
Enable/Disable Spanning Tree. A (1) enables, a (2) disables.
1.3.6.1.4.1.4526.1.1.4.1INTEGER {enabled(1), disabled(2)}read-writemandatory
netgearConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.1.11
configVerSwPrimary
OBJECT-TYPE
The software image version string
1.3.6.1.4.1.4526.1.1.11.1DisplayString (SIZE(0..31))read-onlymandatory
configVerHwChipSet
OBJECT-TYPE
The hardware chipset version string
1.3.6.1.4.1.4526.1.1.11.2DisplayString (SIZE(0..31))read-onlymandatory
configBootMode
OBJECT-TYPE
Defines the method used for downloading the image when reset.
1.3.6.1.4.1.4526.1.1.11.3INTEGER {lastSaved(1), net(2), netAndSave(3)}read-writemandatory
configBootFtpServerIp
OBJECT-TYPE
The FTP server's IP address used for downloading the boot image
1.3.6.1.4.1.4526.1.1.11.4IpAddressread-writemandatory
configBootImageFileName
OBJECT-TYPE
The path and filename of the boot image to download
1.3.6.1.4.1.4526.1.1.11.5DisplayString (SIZE(0..63))read-writemandatory
configPortTable
OBJECT-TYPE
A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet interafaces.
1.3.6.1.4.1.4526.1.1.11.6not-accessiblemandatory
configPortEntry
OBJECT-TYPE
An enterprise specific interface entry.
1.3.6.1.4.1.4526.1.1.11.6.1not-accessiblemandatory
configPort
OBJECT-TYPE
A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber.
1.3.6.1.4.1.4526.1.1.11.6.1.1INTEGERread-writemandatory
configPortDuplex
OBJECT-TYPE
The port's duplex desired state.
1.3.6.1.4.1.4526.1.1.11.6.1.3INTEGER {half-duplex(1), full-duplex(2)}read-writemandatory
configPortDataRate
OBJECT-TYPE
The port's desired transmission data rate.
1.3.6.1.4.1.4526.1.1.11.6.1.6INTEGER {rate10Meg(1), rate100Meg(2), rate1Gig(4)}read-writemandatory
configPortDuplexOper
OBJECT-TYPE
The port's operating duplex state.
1.3.6.1.4.1.4526.1.1.11.6.1.8INTEGER {half-duplex(1), full-duplex(2)}read-onlymandatory
configPortDataRateOper
OBJECT-TYPE
The port's operating transmission data rate.
1.3.6.1.4.1.4526.1.1.11.6.1.9INTEGER {rate10Meg(1), rate100Meg(2), rate1Gig(4)}read-onlymandatory
configPortStateOper
OBJECT-TYPE
The port's current state.
1.3.6.1.4.1.4526.1.1.11.6.1.10INTEGER {disabled(1), blocking(2), listening(3), learning(4), forwarding(5)}read-onlymandatory
configPortFlowControl
OBJECT-TYPE
The port will avoid transmitting a new packet for the period of time specified in a received PAUSE packet when enabled.
1.3.6.1.4.1.4526.1.1.11.6.1.11INTEGER {enabled(1), disabled(2)}read-writemandatory
configPortDefaultVlanId
OBJECT-TYPE
The port will add this vlan id tag to any incoming packet which is lacking a vlan id tag.
1.3.6.1.4.1.4526.1.1.11.6.1.12INTEGER (1..4094)read-writemandatory
configPortComments
OBJECT-TYPE
May contain any comments related to a given port such as a user name or LAN segment.
1.3.6.1.4.1.4526.1.1.11.6.1.13DisplayString (SIZE(0..32))read-writemandatory
configPortAutoNegotiation
OBJECT-TYPE
The port will perform auto-negotiation to determine the port's duplex and data rate. When auto-negotiation is enabled, the negotiated duplex and data rate can be determined by configPortDuplexOper and configPortDataRateOper mib objects respectively.
1.3.6.1.4.1.4526.1.1.11.6.1.14INTEGER {enabled(1), disabled(2)}read-writemandatory
configPortFlowControlOper
OBJECT-TYPE
The port's operating flow control state.
1.3.6.1.4.1.4526.1.1.11.6.1.16INTEGER {enabled(1), disabled(2)}read-onlymandatory
configPortGBIC
OBJECT-TYPE
Port Type.
1.3.6.1.4.1.4526.1.1.11.6.1.17INTEGER {fastEthernet(1), mii(2), fx(3), gigabitEthernetSX(4), gigabitEthernetLX(5), gigabitEthernetGBIC(6), gigabitEthernetTP(7)}read-writemandatory
configPortPriority
OBJECT-TYPE
The port's current flow control state.
1.3.6.1.4.1.4526.1.1.11.6.1.19INTEGER {normal(1), high(2)}read-writemandatory
configPortBroadcastControl
OBJECT-TYPE
The port's broadcast packets per second threshold. If the amount of broadcast packets exceeds this threshold, those packets will be dropped.
1.3.6.1.4.1.4526.1.1.11.6.1.20INTEGER (0..1488100)read-writemandatory
configMirroringOnOff
OBJECT-TYPE
Enable or disable port mirroring.
1.3.6.1.4.1.4526.1.1.11.8INTEGER {enabled(1), disabled(2)}read-writemandatory
configMirrorSrc
OBJECT-TYPE
When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring source port. This value has a valid range of 1 to ifNumber when enbaled.
1.3.6.1.4.1.4526.1.1.11.9INTEGERread-writemandatory
configMirrorMon
OBJECT-TYPE
When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
1.3.6.1.4.1.4526.1.1.11.10INTEGERread-writemandatory
configIpAssignmentMode
OBJECT-TYPE
Indicates whether the device address is assigned by the user (manual), BootP, or DHCP.
1.3.6.1.4.1.4526.1.1.11.12INTEGER {manual(1), bootP(2), dhcp(3)}read-writemandatory
configPhysAddress
OBJECT-TYPE
The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station.
1.3.6.1.4.1.4526.1.1.11.13MacAddressread-onlymandatory
configPasswordAdmin
OBJECT-TYPE
The adminstrator password
1.3.6.1.4.1.4526.1.1.11.15DisplayString (SIZE(0..20))write-onlymandatory
configIpAddress
OBJECT-TYPE
The IP Address for the RDU box.
1.3.6.1.4.1.4526.1.1.11.16IpAddressread-writemandatory
configNetMask
OBJECT-TYPE
The network mask for the RDU box.
1.3.6.1.4.1.4526.1.1.11.17IpAddressread-writemandatory
configGateway
OBJECT-TYPE
The Gatway Address for the unit.
1.3.6.1.4.1.4526.1.1.11.18IpAddressread-writemandatory
configSave
OBJECT-TYPE
Physically saves the current configuration to nvram. - use with care. (1) saves the configuration (2) does nothing.
1.3.6.1.4.1.4526.1.1.11.19INTEGER {save(1), noop(2)}read-writemandatory
configVerBootRomImage
OBJECT-TYPE
The Boot ROM version string
1.3.6.1.4.1.4526.1.1.11.21DisplayString (SIZE(0..31))read-onlymandatory
configRestoreDefaults
OBJECT-TYPE
Restores the configuration of the unit to the original settings.
1.3.6.1.4.1.4526.1.1.11.22INTEGER {restore(1), noop(2)}read-writemandatory
configIGMPOnOff
OBJECT-TYPE
Enable or disable the IGMP protocol within the switch.
1.3.6.1.4.1.4526.1.1.11.23INTEGER {enabled(1), disabled(2)}read-writemandatory
configWebOnOff
OBJECT-TYPE
Enable or disable the Web Interface.
1.3.6.1.4.1.4526.1.1.11.24INTEGER {enabled(1), disabled(2)}read-writemandatory
configHighPriorityOptimization
OBJECT-TYPE
Enable or disable high priority optimization.
1.3.6.1.4.1.4526.1.1.11.25INTEGER {enabled(1), disabled(2)}read-writemandatory
configUserAuthenticationMode
OBJECT-TYPE
Determines whether the user password will be authenticated by the switch, a remote RADIUS server, or some combination of the two.
1.3.6.1.4.1.4526.1.1.11.27INTEGER {basicPasswordOnly(1), basicPasswordThenRemoteRADIUS(2), remoteRADIUSOnly(4)}read-writemandatory
configRadiusServerIpAddress
OBJECT-TYPE
The IP Address of the RADIUS server used for remote user authentication.
1.3.6.1.4.1.4526.1.1.11.28IpAddressread-writemandatory
configRadiusSharedSecret
OBJECT-TYPE
A string of characters used in the RADIUS password encryption process.
1.3.6.1.4.1.4526.1.1.11.29DisplayString (SIZE(0..32))read-writemandatory
configTelnetConsole
OBJECT-TYPE
Enable or disable the telnet console.
1.3.6.1.4.1.4526.1.1.11.30INTEGER {enabled(1), disabled(2)}read-writemandatory
configDiffServTable
OBJECT-TYPE
A list of DSCP Priorities.
1.3.6.1.4.1.4526.1.1.11.31not-accessiblemandatory
configDiffServEntry
OBJECT-TYPE
An enterprise specific DSCP entry.
1.3.6.1.4.1.4526.1.1.11.31.1not-accessiblemandatory
configDiffServDSCP
OBJECT-TYPE
A DSCP value (0 - 63).
1.3.6.1.4.1.4526.1.1.11.31.1.1INTEGERread-onlymandatory
configDiffServPriority
OBJECT-TYPE
The DSCP's current priority setting.
1.3.6.1.4.1.4526.1.1.11.31.1.2INTEGER {normal(1), high(2)}read-writemandatory
configTftpServerIpAddress
OBJECT-TYPE
The IP Address of the tftp server used to upload and download configuration files. This object is to be used in conjunction with configTftpServerFileName and configTftpOperation.
1.3.6.1.4.1.4526.1.1.11.32IpAddressread-writemandatory
configTftpServerFileName
OBJECT-TYPE
The filename, including the path, used to store or retrieve a configuration file from the tftp server. This object is to be used in conjunction with configTftpServerIpAddress and configTftpOperation.
1.3.6.1.4.1.4526.1.1.11.33DisplayString (SIZE(0..64))read-writemandatory
configTftpOperation
OBJECT-TYPE
The tftp operation to perform. Either download a configuration to the unit or upload the current configuration to the tftp server. This object is to be used in conjunction with configTftpServerIpAddress and configTftpServerFileName.
1.3.6.1.4.1.4526.1.1.11.34INTEGER {download(1), upload(2)}read-writemandatory
configIpFilter
OBJECT-TYPE
Determines if access to the device is limited to only those IP addresses specified in the configIpFilterTable.
1.3.6.1.4.1.4526.1.1.11.35INTEGER {enabled(1), disabled(2)}read-writemandatory
configIpFilterTable
OBJECT-TYPE
A list of IP addresses allowed access to this device.
1.3.6.1.4.1.4526.1.1.11.36not-accessiblemandatory
configIpFilterEntry
OBJECT-TYPE
An enterprise specific IP filter entry.
1.3.6.1.4.1.4526.1.1.11.36.1not-accessiblemandatory
configIpFilterIpAddress
OBJECT-TYPE
An IP address which is allowed access to this device.
1.3.6.1.4.1.4526.1.1.11.36.1.1IpAddressread-onlymandatory
configIpFilterStatus
OBJECT-TYPE
The status of an entry in the IP filter Table. Only a subset of the rowstatus variables (active, destroy) are available.
1.3.6.1.4.1.4526.1.1.11.36.1.2INTEGER {active(1), destroy(6)}read-writemandatory
configUserName
OBJECT-TYPE
The users login Id.
1.3.6.1.4.1.4526.1.1.11.37DisplayString (SIZE(0..20))read-writemandatory
configPasswordProtection
OBJECT-TYPE
Determines if a user must login before gaining access to the device.
1.3.6.1.4.1.4526.1.1.11.38INTEGER {enabled(1), disabled(2)}read-writemandatory
configPasswordEncryption
OBJECT-TYPE
Determines when the password is written to the configuration file whether it is written as clear text or encrypted format.
1.3.6.1.4.1.4526.1.1.11.39INTEGER {clearText(1), encrypted(2)}read-writemandatory
configAuthServerIpAddress
OBJECT-TYPE
The IP Address of the server used for 802.1x authentication.
1.3.6.1.4.1.4526.1.1.11.40IpAddressread-writemandatory
configAuthServerSharedSecret
OBJECT-TYPE
A string of characters used in the RADIUS password encryption process by 802.1x authentication.
1.3.6.1.4.1.4526.1.1.11.41DisplayString (SIZE(0..32))read-writemandatory
netgearVlanGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.1.13
vlanTable
OBJECT-TYPE
A list of the VLANs
1.3.6.1.4.1.4526.1.1.13.1not-accessiblemandatory
vlanEntry
OBJECT-TYPE
A VLAN entry containing the VLAN id and name.
1.3.6.1.4.1.4526.1.1.13.1.1not-accessiblemandatory
vlanId
OBJECT-TYPE
The VLAN identifier. A maximum of 64 VLANs is supported. The value must be from 1 to 4094.
1.3.6.1.4.1.4526.1.1.13.1.1.1INTEGERread-onlymandatory
vlanName
OBJECT-TYPE
The VLAN name associated with the VLAN Id.
1.3.6.1.4.1.4526.1.1.13.1.1.2DisplayString (SIZE(0..15))read-writemandatory
vlanStatus
OBJECT-TYPE
The status of an entry in the VLAN Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
1.3.6.1.4.1.4526.1.1.13.1.1.3INTEGER {active(1), createAndGo(4), destroy(6)}read-writemandatory
vlanPortTable
OBJECT-TYPE
A list of ports and their associated VLAN.
1.3.6.1.4.1.4526.1.1.13.2not-accessiblemandatory
vlanPortEntry
OBJECT-TYPE
Information pertaining to an individual port regarding to which VLAN it belongs.
1.3.6.1.4.1.4526.1.1.13.2.1not-accessiblemandatory
vlanPortPortId
OBJECT-TYPE
A port identifier that is in the range of 1 to ifNumber.
1.3.6.1.4.1.4526.1.1.13.2.1.1INTEGERread-onlymandatory
vlanPortVlanId
OBJECT-TYPE
The VLAN identifier.
1.3.6.1.4.1.4526.1.1.13.2.1.2INTEGERread-onlymandatory
vlanPortStatus
OBJECT-TYPE
The status of this port's association within this VLAN. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
1.3.6.1.4.1.4526.1.1.13.2.1.3INTEGER {active(1), createAndGo(4), destroy(6)}read-writemandatory
vlanPortTaggedMode
OBJECT-TYPE
The tagged mode of a VLAN port.
1.3.6.1.4.1.4526.1.1.13.2.1.4INTEGER {untagged(1), tagged(2)}read-writemandatory
netgearPortTrunkGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4526.1.1.14
portTrunkTable
OBJECT-TYPE
A list of port trunks and their associated members.
1.3.6.1.4.1.4526.1.1.14.1not-accessiblemandatory
portTrunkEntry
OBJECT-TYPE
A port trunk entry containing the trunk id and trunk members.
1.3.6.1.4.1.4526.1.1.14.1.1not-accessiblemandatory
portTrunkId
OBJECT-TYPE
The port trunk identifier. The current range is from 1 to 4.
1.3.6.1.4.1.4526.1.1.14.1.1.1INTEGERread-onlymandatory
portTrunkMember
OBJECT-TYPE
A port trunk has four members.
1.3.6.1.4.1.4526.1.1.14.1.1.2INTEGERread-onlymandatory
portTrunkMemberValue
OBJECT-TYPE
A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member.
1.3.6.1.4.1.4526.1.1.14.1.1.3INTEGERread-writemandatory