FR-MFR-MIB
- Registered at
- 1.3.6.1.2.1.10.47
- Last updated
- 2000-11-30 00:00
- Organization
- IETF Frame Relay Service MIB (frnetmib) Working Group
- Revisions
- 2000-11-30 00:00
- Namespace
- standard
- Source file
FR-MFR-MIB- Digest
sha256:85a8a1da8edf686bcc3067e8fe89a195890f60ba58cb105df607c404029d8766
Description
This is the MIB used to control and monitor the multilink frame relay (MFR) function described in FRF.16.
Contact
WG Charter: http://www.ietf.org/html.charters/frnetmib-charter.html WG-email: frnetmib@sunroof.eng.sun.com Subscribe: frnetmib-request@sunroof.eng.sun.com Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib Chair: Andy Malis Vivace Networks Email: Andy.Malis@vivacenetworks.com WG editor: Prayson Pate Overture Networks Email: prayson.pate@overturenetworks.com Co-author: Bob Lynch Overture Networks EMail: bob.lynch@overturenetworks.com Co-author: Kenneth Rehbehn Megisto Systems, Inc. EMail: krehbehn@megisto.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso, transmission |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TestAndIncr |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
FR-MFR-MIB IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| MfrBundleLinkState TEXTUAL-CONVENTION The possible states for a bundle link, as defined in Annex A of FRF.16. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mfrMibScalarObjects OBJECT-IDENTITY | 1.3.6.1.2.1.10.47.1 | |||
| mfrBundleMaxNumBundles OBJECT-TYPE This object is used to inform the manager of the maximum number of bundles supported by this device. | 1.3.6.1.2.1.10.47.1.1 | Integer32 | read-only | current |
| mfrBundleNextIndex OBJECT-TYPE This object is used to assist the manager in selecting a value for mfrBundleIndex during row creation in the mfrBundleTable. It can also be used to avoid race conditions with multiple managers trying to create rows in the table (see RFC 2494 [RFC2494] for one such alogrithm). | 1.3.6.1.2.1.10.47.1.2 | TestAndIncr | read-write | current |
| mfrMibBundleObjects OBJECT-IDENTITY | 1.3.6.1.2.1.10.47.2 | |||
| mfrBundleTable OBJECT-TYPE The bundle configuration and status table. There is a one-to-one correspondence between a bundle and an interface represented in the ifTable. The following objects of the ifTable have specific meaning for an MFR bundle: ifAdminStatus - the bundle admin status ifOperStatus - the bundle operational status ifSpeed - the current bandwidth of the bundle ifInUcastPkts - the number of frames received on the bundle ifOutUcastPkts - the number of frames transmitted on the bundle ifInErrors - frame (not fragment) errors ifOutErrors - frame (not fragment) errors | 1.3.6.1.2.1.10.47.2.3 | not-accessible | current | |
| mfrBundleEntry OBJECT-TYPE An entry in the bundle table. | 1.3.6.1.2.1.10.47.2.3.1 | not-accessible | current | |
| mfrBundleIndex OBJECT-TYPE The index into the table. While this corresponds to an entry in the ifTable, the value of mfrBundleIndex need not match that of the ifIndex in the ifTable. A manager can use mfrBundleNextIndex to select a unique mfrBundleIndex for creating a new row. | 1.3.6.1.2.1.10.47.2.3.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| mfrBundleIfIndex OBJECT-TYPE The value must match an entry in the interface table whose ifType must be set to frf16MfrBundle(163). For example: if the value of mfrBundleIfIndex is 10, then a corresponding entry should be present in the ifTable with an index of 10 and an ifType of 163. | 1.3.6.1.2.1.10.47.2.3.1.2 | InterfaceIndex | read-only | current |
| mfrBundleRowStatus OBJECT-TYPE The mfrBundleRowStatus object allows create, change, and delete operations on bundle entries. | 1.3.6.1.2.1.10.47.2.3.1.3 | RowStatus | read-create | current |
| mfrBundleNearEndName OBJECT-TYPE The configured name of the bundle. | 1.3.6.1.2.1.10.47.2.3.1.4 | SnmpAdminString | read-create | current |
| mfrBundleFragmentation OBJECT-TYPE Controls whether the bundle performs/accepts fragmentation and re-assembly. The possible values are: enable(1) - Bundle links will fragment frames disable(2) - Bundle links will not fragment frames. | 1.3.6.1.2.1.10.47.2.3.1.5 | INTEGER {enable(1), disable(2)} | read-create | current |
| mfrBundleMaxFragSize OBJECT-TYPE The maximum fragment size supported. Note that this is only valid if mfrBundleFragmentation is set to enable(1). Zero is not a valid fragment size. A bundle that does not support fragmentation must return this object with a value of -1. | 1.3.6.1.2.1.10.47.2.3.1.6 | Integer32 (-1..8184) | read-create | current |
| mfrBundleTimerHello OBJECT-TYPE The configured MFR Hello Timer value. | 1.3.6.1.2.1.10.47.2.3.1.7 | INTEGER (1..180) | read-create | current |
| mfrBundleTimerAck OBJECT-TYPE The configured MFR T_ACK value. | 1.3.6.1.2.1.10.47.2.3.1.8 | INTEGER (1..10) | read-create | current |
| mfrBundleCountMaxRetry OBJECT-TYPE The MFR N_MAX_RETRY value. | 1.3.6.1.2.1.10.47.2.3.1.9 | INTEGER (1..5) | read-create | current |
| mfrBundleActivationClass OBJECT-TYPE Controls the conditions under which the bundle is activated. The following settings are available: mfrBundleActivationClassA(1) - at least one must link up mfrBundleActivationClassB(2) - all links must be up mfrBundleActivationClassC(3) - a certain number must be up. Refer to mfrBundleThreshold for the required number. mfrBundleActivationClassD(4) - custom (implementation specific). | 1.3.6.1.2.1.10.47.2.3.1.10 | INTEGER {mfrBundleActivationClassA(1), mfrBundleActivationClassB(2), mfrBundleActivationClassC(3), mfrBundleActivationClassD(4)} | read-create | current |
| mfrBundleThreshold OBJECT-TYPE Specifies the number of links that must be in operational 'up' state before the bundle will transition to an operational up/active state. If the number of operational 'up' links falls below this value, then the bundle will transition to an inactive state. Note - this is only valid when mfrBundleActivationClass is set to mfrBundleActivationClassC or, depending upon the implementation, to mfrBundleActivationClassD. A bundle that is not set to one of these must return this object with a value of -1. | 1.3.6.1.2.1.10.47.2.3.1.11 | Integer32 (-1..2147483647) | read-create | current |
| mfrBundleMaxDiffDelay OBJECT-TYPE The maximum delay difference between the bundle links. A value of -1 indicates that this object does not contain a valid value | 1.3.6.1.2.1.10.47.2.3.1.12 | Integer32 (-1..2147483647) | read-create | current |
| mfrBundleSeqNumSize OBJECT-TYPE Controls whether the standard FRF.12 12-bit sequence number is used or the optional 24-bit sequence number. | 1.3.6.1.2.1.10.47.2.3.1.13 | INTEGER {seqNumSize12bit(1), seqNumSize24bit(2)} | read-create | current |
| mfrBundleMaxBundleLinks OBJECT-TYPE The maximum number of bundle links supported for this bundle. | 1.3.6.1.2.1.10.47.2.3.1.14 | Integer32 (1..2147483647) | read-only | current |
| mfrBundleLinksConfigured OBJECT-TYPE The number of links configured for the bundle. | 1.3.6.1.2.1.10.47.2.3.1.15 | Integer32 (1..2147483647) | read-only | current |
| mfrBundleLinksActive OBJECT-TYPE The number of links that are active. | 1.3.6.1.2.1.10.47.2.3.1.16 | Integer32 (-1..2147483647) | read-only | current |
| mfrBundleBandwidth OBJECT-TYPE The amount of available bandwidth on the bundle | 1.3.6.1.2.1.10.47.2.3.1.17 | Integer32 | read-only | current |
| mfrBundleFarEndName OBJECT-TYPE Name of the bundle received from the far end. | 1.3.6.1.2.1.10.47.2.3.1.18 | SnmpAdminString | read-only | current |
| mfrBundleResequencingErrors OBJECT-TYPE A count of the number of resequencing errors. Each event may correspond to multiple lost frames. Example: Say sequence number 56, 59 and 60 is received for DLCI 100. It is decided by some means that sequence 57 and 58 is lost. This counter should then be incremented by ONE, even though two frames were lost. | 1.3.6.1.2.1.10.47.2.3.1.19 | Counter32 | read-only | current |
| mfrBundleIfIndexMappingTable OBJECT-TYPE A table mapping the values of ifIndex to the mfrBundleIndex. This is required in order to find the mfrBundleIndex given an ifIndex. The mapping of mfrBundleIndex to ifIndex is provided by the mfrBundleIfIndex entry in the mfrBundleTable. | 1.3.6.1.2.1.10.47.2.4 | not-accessible | current | |
| mfrBundleIfIndexMappingEntry OBJECT-TYPE Each row describes one ifIndex to mfrBundleIndex mapping. | 1.3.6.1.2.1.10.47.2.4.1 | not-accessible | current | |
| mfrBundleIfIndexMappingIndex OBJECT-TYPE The mfrBundleIndex of the given ifIndex. | 1.3.6.1.2.1.10.47.2.4.1.2 | Integer32 (1..2147483647) | read-only | current |
| mfrMibBundleLinkObjects OBJECT-IDENTITY | 1.3.6.1.2.1.10.47.3 | |||
| mfrBundleLinkTable OBJECT-TYPE The bundle link configuration and status table. There is a one-to-one correspondence between a bundle link and a physical interface represented in the ifTable. The ifIndex of the physical interface is used to index the bundle link table, and to create rows. The following objects of the ifTable have specific meaning for an MFR bundle link: ifAdminStatus - the bundle link admin status ifOperStatus - the bundle link operational status ifSpeed - the bandwidth of the bundle link interface ifInUcastPkts - the number of frames received on the bundle link ifOutUcastPkts - the number of frames transmitted on the bundle link ifInErrors - frame and fragment errors ifOutErrors - frame and fragment errors | 1.3.6.1.2.1.10.47.3.1 | not-accessible | current | |
| mfrBundleLinkEntry OBJECT-TYPE An entry in the bundle link table. | 1.3.6.1.2.1.10.47.3.1.1 | not-accessible | current | |
| mfrBundleLinkRowStatus OBJECT-TYPE The mfrBundleLinkRowStatus object allows create, change, and delete operations on mfrBundleLink entries. The create operation must fail if no physical interface is associated with the bundle link. | 1.3.6.1.2.1.10.47.3.1.1.1 | RowStatus | read-create | current |
| mfrBundleLinkConfigBundleIndex OBJECT-TYPE The mfrBundleLinkConfigBundleIndex object allows the manager to control the bundle to which the bundle link is assigned. If no value were in this field, then the bundle would remain in NOT_READY rowStatus and be unable to go to active. With an appropriate mfrBundleIndex in this field, then we could put the mfrBundleLink row in NOT_IN_SERVICE or ACTIVE rowStatus. | 1.3.6.1.2.1.10.47.3.1.1.2 | Integer32 (1..2147483647) | read-create | current |
| mfrBundleLinkNearEndName OBJECT-TYPE The configured bundle link name that is sent to the far end. | 1.3.6.1.2.1.10.47.3.1.1.3 | SnmpAdminString | read-create | current |
| mfrBundleLinkState OBJECT-TYPE Current bundle link state as defined by the MFR protocol described in Annex A of FRF.16. | 1.3.6.1.2.1.10.47.3.1.1.4 | MfrBundleLinkState | read-only | current |
| mfrBundleLinkFarEndName OBJECT-TYPE Name of bundle link received from far end. | 1.3.6.1.2.1.10.47.3.1.1.5 | SnmpAdminString | read-only | current |
| mfrBundleLinkFarEndBundleName OBJECT-TYPE Name of far end bundle for this link received from far end. | 1.3.6.1.2.1.10.47.3.1.1.6 | SnmpAdminString | read-only | current |
| mfrBundleLinkDelay OBJECT-TYPE Current round-trip delay for this bundle link. The value -1 is returned when an implementation does not support measurement of the bundle link delay. | 1.3.6.1.2.1.10.47.3.1.1.7 | Integer32 (-1..2147483647) | read-only | current |
| mfrBundleLinkFramesControlTx OBJECT-TYPE Number of MFR control frames sent. | 1.3.6.1.2.1.10.47.3.1.1.8 | Counter32 | read-only | current |
| mfrBundleLinkFramesControlRx OBJECT-TYPE Number of valid MFR control frames received. | 1.3.6.1.2.1.10.47.3.1.1.9 | Counter32 | read-only | current |
| mfrBundleLinkFramesControlInvalid OBJECT-TYPE The number of invalid MFR control frames received. | 1.3.6.1.2.1.10.47.3.1.1.10 | Counter32 | read-only | current |
| mfrBundleLinkTimerExpiredCount OBJECT-TYPE Number of times the T_HELLO or T_ACK timers expired. | 1.3.6.1.2.1.10.47.3.1.1.11 | Counter32 | read-only | current |
| mfrBundleLinkLoopbackSuspected OBJECT-TYPE The number of times a loopback has been suspected (based upon the use of magic numbers). | 1.3.6.1.2.1.10.47.3.1.1.12 | Counter32 | read-only | current |
| mfrBundleLinkUnexpectedSequence OBJECT-TYPE The number of data MFR frames discarded because the sequence number of the frame for a DLCI was less than (delayed frame) or equal to (duplicate frame) the one expected for that DLCI. Example: Say frames with sequence numbers 56, 58, 59 is received for DLCI 100. While waiting for sequence number 57 another frame with sequence number 58 arrives. Frame 58 is discarded and the counter is incremented. | 1.3.6.1.2.1.10.47.3.1.1.13 | Counter32 | read-only | current |
| mfrBundleLinkMismatch OBJECT-TYPE The number of times that the unit has been notified by the remote peer that the bundle name is inconsistent with other bundle links attached to the far-end bundle. | 1.3.6.1.2.1.10.47.3.1.1.14 | Counter32 | read-only | current |
| mfrMibTraps OBJECT-IDENTITY | 1.3.6.1.2.1.10.47.4 | |||
| mfrMibTrapsPrefix OBJECT-IDENTITY | 1.3.6.1.2.1.10.47.4.0 | |||
| mfrMibConformance OBJECT-IDENTITY | 1.3.6.1.2.1.10.47.5 | |||
| mfrMibGroups OBJECT-IDENTITY | 1.3.6.1.2.1.10.47.5.1 | |||
| mfrMibCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.10.47.5.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| mfrMibTrapBundleLinkMismatch NOTIFICATION-TYPE This trap indicates that a bundle link mismatch has been detected. The following objects are reported: mfrBundleNearEndName: configured name of near end bundle mfrBundleFarEndName: previously reported name of far end bundle mfrBundleLinkNearEndName: configured name of near end bundle mfrBundleLinkFarEndName: reported name of far end bundle mfrBundleLinkFarEndBundleName: currently reported name of far end bundle Note: that the configured items may have been configured automatically. Note: The mfrBundleLinkMismatch counter is incremented when the trap is sent. | 1.3.6.1.2.1.10.47.4.0.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| mfrMibBundleGroup OBJECT-GROUP Group of objects describing bundles. | 1.3.6.1.2.1.10.47.5.1.1 | current |
| mfrMibBundleLinkGroup OBJECT-GROUP Group of objects describing bundle links. | 1.3.6.1.2.1.10.47.5.1.2 | current |
| mfrMibTrapGroup NOTIFICATION-GROUP Group of objects describing notifications (traps). | 1.3.6.1.2.1.10.47.5.1.3 | current |
| mfrMibCompliance MODULE-COMPLIANCE The compliance statement for equipment that implements the FRF16 MIB. All of the current groups are mandatory, but a number of objects may be read-only if the implementation does not allow configuration. | 1.3.6.1.2.1.10.47.5.2.1 | current |