MIBs Depot

FOUNDRY-SN-MAC-VLAN-MIB

Registered at
1.3.6.1.4.1.1991.1.1.3.30
Last updated
2007-06-25 00:00
Organization
Foundry Networks, Inc
Revisions
2007-06-25 00:00
Namespace
extreme
Source file
FOUNDRY-SN-MAC-VLAN-MIB
Digest
sha256:6c789b1f5301607b529cd2101ef51f5ef7550d4caa51aa083914df25642b8faa

Description

Management Information Base module for MAC-based Vlan configuration and statistics.

Imports

FromSymbols
IF-MIBInterfaceIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

FOUNDRY-SN-MAC-VLAN-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
snMacVlanGlobalObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.1.3.30.1
snMacVlanGlobalClearOper
OBJECT-TYPE
valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear operational MAC-based Vlan entry for all ports.
1.3.6.1.4.1.1991.1.1.3.30.1.1INTEGER {valid(0), clear(1)}read-writecurrent
snMacVlanGlobalDynConfigState
OBJECT-TYPE
Enable/disable MAC-based VLAN dynamic activation on the global level.
1.3.6.1.4.1.1991.1.1.3.30.1.2INTEGER {disabled(0), enabled(1)}read-writecurrent
snMacVlanTableObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.1.3.30.2
snMacVlanPortMemberTable
OBJECT-TYPE
MAC-based Vlan port membership table.
1.3.6.1.4.1.1991.1.1.3.30.2.1not-accessiblecurrent
snMacVlanPortMemberEntry
OBJECT-TYPE
An entry of the MAC-based Vlan port membership table.
1.3.6.1.4.1.1991.1.1.3.30.2.1.1not-accessiblecurrent
snMacVlanPortMemberVLanId
OBJECT-TYPE
The VLAN identifier (VLAN ID).
1.3.6.1.4.1.1991.1.1.3.30.2.1.1.1INTEGER (1..4095)not-accessiblecurrent
snMacVlanPortMemberPortId
OBJECT-TYPE
The ifIndex which is a member of the MAC-based VLAN.
1.3.6.1.4.1.1991.1.1.3.30.2.1.1.2InterfaceIndexnot-accessiblecurrent
snMacVlanPortMemberRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.1.3.30.2.1.1.3INTEGER {other(1), valid(2), delete(3), create(4)}read-writecurrent
snMacVlanIfTable
OBJECT-TYPE
MAC-based Vlan Interface table.
1.3.6.1.4.1.1991.1.1.3.30.2.2not-accessiblecurrent
snMacVlanIfEntry
OBJECT-TYPE
An entry in the MAC-based Vlan interface table.
1.3.6.1.4.1.1991.1.1.3.30.2.2.1not-accessiblecurrent
snMacVlanIfIndex
OBJECT-TYPE
The ifIndex which is a member of the MAC-based VLAN.
1.3.6.1.4.1.1991.1.1.3.30.2.2.1.1InterfaceIndexnot-accessiblecurrent
snMacVlanIfEnable
OBJECT-TYPE
The administrative status requested by management for MAC-based Vlan on this interface. The value enabled(1) indicates that MAC-based Vlan should be enabled on this interface, When disabled(2), MAC-based Vlan is disabled on this interface. Enable/disable MAC-based Vlan on this interface.
1.3.6.1.4.1.1991.1.1.3.30.2.2.1.2INTEGER {disabled(0), enabled(1)}read-writecurrent
snMacVlanIfMaxEntry
OBJECT-TYPE
The maximum number of allowed and denied MAC address (static and dynamic) that can be leared on an interface. The default value is 2. The value should be between 2 to 32.
1.3.6.1.4.1.1991.1.1.3.30.2.2.1.3Integer32 (2..32)read-writecurrent
snMacVlanIfClearOper
OBJECT-TYPE
valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing operational MAC-based Vlan entry for a port.
1.3.6.1.4.1.1991.1.1.3.30.2.2.1.4INTEGER {valid(0), clear(1)}read-writecurrent
snMacVlanIfClearConfig
OBJECT-TYPE
valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clearing configured MAC-based Vlan entry for a port.
1.3.6.1.4.1.1991.1.1.3.30.2.2.1.5INTEGER {valid(0), clear(1)}read-writecurrent
snMacBasedVlanTable
OBJECT-TYPE
MAC-based Vlan table.
1.3.6.1.4.1.1991.1.1.3.30.2.3not-accessiblecurrent
snMacBasedVlanEntry
OBJECT-TYPE
An entry in the MAC-based Vlan table.
1.3.6.1.4.1.1991.1.1.3.30.2.3.1not-accessiblecurrent
snMacBasedVlanId
OBJECT-TYPE
The ID of a VLAN of which this port is a mac-vlan-permit member. Port must be untagged. This object return 0 which is an invalid VLAN ID value.
1.3.6.1.4.1.1991.1.1.3.30.2.3.1.1INTEGER (1..4095)not-accessiblecurrent
snMacBasedVlanMac
OBJECT-TYPE
A host source MAC address to be authenticated.
1.3.6.1.4.1.1991.1.1.3.30.2.3.1.2MacAddressnot-accessiblecurrent
snMacBasedVlanPriority
OBJECT-TYPE
The priority of the source MAC address.
1.3.6.1.4.1.1991.1.1.3.30.2.3.1.3Integer32 (0..7)read-writecurrent
snMacBasedVlanRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row If the row exists, then a SET with value of create(4) returns error 'wrongValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuchName...no such row other(1).....some other cases valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.1.3.30.2.3.1.4INTEGER {other(1), valid(2), delete(3), create(4)}read-writecurrent