MIBs Depot

FOUNDRY-SN-BGP4-GROUP-MIB

Registered at
1.3.6.1.4.1.1991.1.2.11
Last updated
2010-06-02 00:00
Organization
Brocade Communications Systems, Inc.
Revisions
2010-06-02 00:00, 2009-09-30 00:00
Namespace
extreme
Source file
FOUNDRY-SN-BGP4-GROUP-MIB
Digest
sha256:16ea19e17c0091349710ed11d71824a4f7c657012314bcc14b5840e2496c84b9

Description

Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.

Contact

Technical Support Center 130 Holger Way, San Jose, CA 95134 Email: ipsupport@brocade.com Phone: 1-800-752-8061 URL: www.brocade.com

Imports

FromSymbols
FOUNDRY-SN-ROOT-MIBrouter
INET-ADDRESS-MIBInetAutonomousSystemNumber
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

FOUNDRY-SN-BGP4-GROUP-MIB
FOUNDRY-SN-ROOT-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
snBgp4Gen
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.1
snBgp4GenAlwaysCompareMed
OBJECT-TYPE
To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS.
1.3.6.1.4.1.1991.1.2.11.1.1INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4GenAutoSummary
OBJECT-TYPE
To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes.
1.3.6.1.4.1.1991.1.2.11.1.2INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4GenDefaultLocalPreference
OBJECT-TYPE
To set the default local preference attribute.
1.3.6.1.4.1.1991.1.2.11.1.3Integer32read-writecurrent
snBgp4GenDefaultInfoOriginate
OBJECT-TYPE
To enable/disable the default Information Originate.
1.3.6.1.4.1.1991.1.2.11.1.4INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4GenFastExternalFallover
OBJECT-TYPE
To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down.
1.3.6.1.4.1.1991.1.2.11.1.5INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4GenNextBootNeighbors
OBJECT-TYPE
The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBgp4GenMaxNeighbors.
1.3.6.1.4.1.1991.1.2.11.1.6Integer32read-writecurrent
snBgp4GenNextBootRoutes
OBJECT-TYPE
The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes.
1.3.6.1.4.1.1991.1.2.11.1.7Integer32read-writecurrent
snBgp4GenSynchronization
OBJECT-TYPE
To enable/disable the synchronization between BGP and your IGP.
1.3.6.1.4.1.1991.1.2.11.1.8INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4GenKeepAliveTime
OBJECT-TYPE
The Keep alive timer.
1.3.6.1.4.1.1991.1.2.11.1.9INTEGER (0..65535)read-writecurrent
snBgp4GenHoldTime
OBJECT-TYPE
The Hold time timer.
1.3.6.1.4.1.1991.1.2.11.1.10INTEGER (0..65535)read-writecurrent
snBgp4GenRouterId
OBJECT-TYPE
BGP Router Id.
1.3.6.1.4.1.1991.1.2.11.1.11IpAddressread-writecurrent
snBgp4GenTableMap
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.1991.1.2.11.1.12OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4GenAdminStat
OBJECT-TYPE
The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router.
1.3.6.1.4.1.1991.1.2.11.1.13INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4GenDefaultMetric
OBJECT-TYPE
To set default metric values for the BGP4 protocol.
1.3.6.1.4.1.1991.1.2.11.1.14Integer32read-writecurrent
snBgp4GenMaxNeighbors
OBJECT-TYPE
The maximum number of neighbors can be configured in a BGP Peer Group.
1.3.6.1.4.1.1991.1.2.11.1.15Integer32read-onlycurrent
snBgp4GenMinNeighbors
OBJECT-TYPE
The minimum number of neighbors can be configured in a BGP Peer Group.
1.3.6.1.4.1.1991.1.2.11.1.16Integer32read-onlycurrent
snBgp4GenMaxRoutes
OBJECT-TYPE
The maximum configured number of Routes.
1.3.6.1.4.1.1991.1.2.11.1.17Integer32read-onlycurrent
snBgp4GenMinRoutes
OBJECT-TYPE
The minimum configured number of Routes.
1.3.6.1.4.1.1991.1.2.11.1.18Integer32read-onlycurrent
snBgp4GenMaxAddrFilters
OBJECT-TYPE
The maximum configured number of BGP4 address filters.
1.3.6.1.4.1.1991.1.2.11.1.19Integer32read-onlycurrent
snBgp4GenMaxAggregateAddresses
OBJECT-TYPE
The maximum configured number of BGP4 aggregate addresses.
1.3.6.1.4.1.1991.1.2.11.1.20Integer32read-onlycurrent
snBgp4GenMaxAsPathFilters
OBJECT-TYPE
The maximum configured number of BGP4 AS-PATH filters.
1.3.6.1.4.1.1991.1.2.11.1.21Integer32read-onlycurrent
snBgp4GenMaxCommunityFilters
OBJECT-TYPE
The maximum configured number of BGP4 Community filters.
1.3.6.1.4.1.1991.1.2.11.1.22Integer32read-onlycurrent
snBgp4GenMaxNetworks
OBJECT-TYPE
The maximum configured number of BGP4 Networks.
1.3.6.1.4.1.1991.1.2.11.1.23Integer32read-onlycurrent
snBgp4GenMaxRouteMapFilters
OBJECT-TYPE
The maximum configured number of BGP4 Route-map Filters.
1.3.6.1.4.1.1991.1.2.11.1.24Integer32read-onlycurrent
snBgp4GenNeighPrefixMinValue
OBJECT-TYPE
The minimum configured value of BGP4 Neighbor Prefix.
1.3.6.1.4.1.1991.1.2.11.1.25Integer32read-onlycurrent
snBgp4GenOperNeighbors
OBJECT-TYPE
The current operational max number of neighbors configured for a BGP Group.
1.3.6.1.4.1.1991.1.2.11.1.26Integer32read-onlycurrent
snBgp4GenOperRoutes
OBJECT-TYPE
The current operational number of Routes.
1.3.6.1.4.1.1991.1.2.11.1.27Integer32read-onlycurrent
snBgp4GenLocalAs
OBJECT-TYPE
Bgp4 local autonomous system number.
1.3.6.1.4.1.1991.1.2.11.1.28INTEGER (1..65535)read-writecurrent
snBgp4GenRoutesInstalled
OBJECT-TYPE
Bgp4 installed routes.
1.3.6.1.4.1.1991.1.2.11.1.29Integer32read-onlycurrent
snBgp4GenAsPathInstalled
OBJECT-TYPE
Bgp4 installed autonomous system path.
1.3.6.1.4.1.1991.1.2.11.1.30Integer32read-onlycurrent
snBgp4ExternalDistance
OBJECT-TYPE
Administrative distance for BGP external routes.
1.3.6.1.4.1.1991.1.2.11.1.31INTEGER (1..255)read-writecurrent
snBgp4InternalDistance
OBJECT-TYPE
Administrative distance for BGP internal routes.
1.3.6.1.4.1.1991.1.2.11.1.32INTEGER (1..255)read-writecurrent
snBgp4LocalDistance
OBJECT-TYPE
Administrative distance for BGP local routes.
1.3.6.1.4.1.1991.1.2.11.1.33INTEGER (1..255)read-writecurrent
snBgp4OperNumOfAttributes
OBJECT-TYPE
The operational number of attribute entries.
1.3.6.1.4.1.1991.1.2.11.1.34Integer32read-onlycurrent
snBgp4NextBootMaxAttributes
OBJECT-TYPE
The next boot maximum attribute entries. 10000 means reset to default.
1.3.6.1.4.1.1991.1.2.11.1.35INTEGER (200..30000)read-writecurrent
snBgp4ClusterId
OBJECT-TYPE
A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default.
1.3.6.1.4.1.1991.1.2.11.1.36Integer32read-writecurrent
snBgp4ClientToClientReflection
OBJECT-TYPE
To enable/disable the client to client reflection in BGP4.
1.3.6.1.4.1.1991.1.2.11.1.37INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4GenTotalNeighbors
OBJECT-TYPE
The current total number of neighbors running in a BGP Group.
1.3.6.1.4.1.1991.1.2.11.1.38Integer32read-onlycurrent
snBgp4GenMaxPaths
OBJECT-TYPE
The maximum configured number of Paths.
1.3.6.1.4.1.1991.1.2.11.1.39INTEGER (1..8)read-writecurrent
snBgp4GenConfedId
OBJECT-TYPE
Bgp4 Confederation Id.
1.3.6.1.4.1.1991.1.2.11.1.40INTEGER (1..65535)read-writecurrent
snBgp4GenConfedPeers
OBJECT-TYPE
An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.1.41OCTET STRING (SIZE(0..100))read-writecurrent
snBgp4GenDampening
OBJECT-TYPE
The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes routemap is configurable.
1.3.6.1.4.1.1991.1.2.11.1.42INTEGER {none(0), parameters(1), routeMap(2)}read-writecurrent
snBgp4GenDampenHalfLife
OBJECT-TYPE
Bgp4 Dampening Half Life.
1.3.6.1.4.1.1991.1.2.11.1.43INTEGER (1..45)read-writecurrent
snBgp4GenDampenReuse
OBJECT-TYPE
Bgp4 Dampening Reuse.
1.3.6.1.4.1.1991.1.2.11.1.44INTEGER (1..20000)read-writecurrent
snBgp4GenDampenSuppress
OBJECT-TYPE
Bgp4 Dampening Suppress.
1.3.6.1.4.1.1991.1.2.11.1.45INTEGER (1..20000)read-writecurrent
snBgp4GenDampenMaxSuppress
OBJECT-TYPE
Bgp4 Dampening Max Suppress Time.
1.3.6.1.4.1.1991.1.2.11.1.46INTEGER (1..20000)read-writecurrent
snBgp4GenDampenMap
OBJECT-TYPE
An octet string of the route-map name for dampening, each character of the name is represented by one octet.
1.3.6.1.4.1.1991.1.2.11.1.47OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4GenLocalAs4
OBJECT-TYPE
BGP4 local autonomous system (AS) number to support 4 byte AS format.
1.3.6.1.4.1.1991.1.2.11.1.48InetAutonomousSystemNumberread-writecurrent
snBgp4GenDefaultMetric1
OBJECT-TYPE
To set default metric values for the BGP4 protocol.
1.3.6.1.4.1.1991.1.2.11.1.49Unsigned32read-writecurrent
snBgp4GenDefaultLocalPreference1
OBJECT-TYPE
To set the default local preference attribute.
1.3.6.1.4.1.1991.1.2.11.1.50Unsigned32read-writecurrent
snBgp4AddrFilter
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.2
snBgp4AddrFilterTable
OBJECT-TYPE
Bgp4 Address Filter table.
1.3.6.1.4.1.1991.1.2.11.2.1not-accessiblecurrent
snBgp4AddrFilterEntry
OBJECT-TYPE
An entry in the Bgp4 Address Filter table.
1.3.6.1.4.1.1991.1.2.11.2.1.1not-accessiblecurrent
snBgp4AddrFilterIndex
OBJECT-TYPE
The table index for a filter entry.
1.3.6.1.4.1.1991.1.2.11.2.1.1.1Integer32read-onlycurrent
snBgp4AddrFilterAction
OBJECT-TYPE
Action to take if the bgp address match with this filter.
1.3.6.1.4.1.1991.1.2.11.2.1.1.2INTEGER {deny(0), permit(1)}read-writecurrent
snBgp4AddrFilterSourceIp
OBJECT-TYPE
Source IP address.
1.3.6.1.4.1.1991.1.2.11.2.1.1.3IpAddressread-writecurrent
snBgp4AddrFilterSourceMask
OBJECT-TYPE
Source IP subnet mask.
1.3.6.1.4.1.1991.1.2.11.2.1.1.4IpAddressread-writecurrent
snBgp4AddrFilterDestIp
OBJECT-TYPE
Destination IP address.
1.3.6.1.4.1.1991.1.2.11.2.1.1.5IpAddressread-writecurrent
snBgp4AddrFilterDestMask
OBJECT-TYPE
Destination IP subnet mask.
1.3.6.1.4.1.1991.1.2.11.2.1.1.6IpAddressread-writecurrent
snBgp4AddrFilterRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.2.1.1.7INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snBgp4AggregateAddr
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.3
snBgp4AggregateAddrTable
OBJECT-TYPE
Bgp4 Aggregate Address table.
1.3.6.1.4.1.1991.1.2.11.3.1not-accessiblecurrent
snBgp4AggregateAddrEntry
OBJECT-TYPE
An entry in the Bgp4 Aggregate Address table.
1.3.6.1.4.1.1991.1.2.11.3.1.1not-accessiblecurrent
snBgp4AggregateAddrIp
OBJECT-TYPE
Aggregate Address IP address.
1.3.6.1.4.1.1991.1.2.11.3.1.1.1IpAddressread-onlycurrent
snBgp4AggregateAddrMask
OBJECT-TYPE
Aggregate Address IP subnet mask.
1.3.6.1.4.1.1991.1.2.11.3.1.1.2IpAddressread-onlycurrent
snBgp4AggregateAddrOption
OBJECT-TYPE
address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table.
1.3.6.1.4.1.1991.1.2.11.3.1.1.3INTEGER {address(1), asSet(2), summaryOnly(3), suppressMap(4), advertiseMap(5), attributeMap(6)}read-onlycurrent
snBgp4AggregateAddrMap
OBJECT-TYPE
This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only two Options for creating an aggregate address map. A SNMP-SET error will be returned for other options. An octet string of the map name, each character of the name is represented by one octet.
1.3.6.1.4.1.1991.1.2.11.3.1.1.4OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4AggregateAddrRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.3.1.1.5INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snBgp4AsPathFilter
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.4
snBgp4AsPathFilterTable
OBJECT-TYPE
Bgp4 AS-Path Filter table.
1.3.6.1.4.1.1991.1.2.11.4.1not-accessiblecurrent
snBgp4AsPathFilterEntry
OBJECT-TYPE
An entry in the Bgp4 As-path Filter table.
1.3.6.1.4.1.1991.1.2.11.4.1.1not-accessiblecurrent
snBgp4AsPathFilterIndex
OBJECT-TYPE
The table index for a filter entry.
1.3.6.1.4.1.1991.1.2.11.4.1.1.1Integer32read-onlycurrent
snBgp4AsPathFilterAction
OBJECT-TYPE
Action to take if the bgp address match with this filter.
1.3.6.1.4.1.1991.1.2.11.4.1.1.2INTEGER {deny(0), permit(1)}read-writecurrent
snBgp4AsPathFilterRegExpression
OBJECT-TYPE
Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet.
1.3.6.1.4.1.1991.1.2.11.4.1.1.3OCTET STRING (SIZE(0..256))read-writecurrent
snBgp4AsPathFilterRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.4.1.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snBgp4CommunityFilter
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.5
snBgp4CommunityFilterTable
OBJECT-TYPE
Bgp4 Community Filter table.
1.3.6.1.4.1.1991.1.2.11.5.1not-accessiblecurrent
snBgp4CommunityFilterEntry
OBJECT-TYPE
An entry in the Bgp4 Community Filter table.
1.3.6.1.4.1.1991.1.2.11.5.1.1not-accessiblecurrent
snBgp4CommunityFilterIndex
OBJECT-TYPE
The table index for a filter entry.
1.3.6.1.4.1.1991.1.2.11.5.1.1.1Integer32read-onlycurrent
snBgp4CommunityFilterAction
OBJECT-TYPE
Action to take if the bgp address match with this filter.
1.3.6.1.4.1.1991.1.2.11.5.1.1.2INTEGER {deny(0), permit(1)}read-writecurrent
snBgp4CommunityFilterCommNum
OBJECT-TYPE
A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs.
1.3.6.1.4.1.1991.1.2.11.5.1.1.3OCTET STRING (SIZE(0..80))read-writecurrent
snBgp4CommunityFilterInternet
OBJECT-TYPE
Disabled/Enabled the Internet Community.
1.3.6.1.4.1.1991.1.2.11.5.1.1.4INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4CommunityFilterNoAdvertise
OBJECT-TYPE
Do not advertise this route to any peer (internal or external).
1.3.6.1.4.1.1991.1.2.11.5.1.1.5INTEGER {false(0), true(1)}read-writecurrent
snBgp4CommunityFilterNoExport
OBJECT-TYPE
Do not advertise this route to an EBGP peer.
1.3.6.1.4.1.1991.1.2.11.5.1.1.6INTEGER {false(0), true(1)}read-writecurrent
snBgp4CommunityFilterRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.5.1.1.7INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snBgp4CommunityFilterLocalAs
OBJECT-TYPE
Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system.
1.3.6.1.4.1.1991.1.2.11.5.1.1.8INTEGER {false(0), true(1)}read-writecurrent
snBgp4NeighGenCfg
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.6
snBgp4NeighGenCfgTable
OBJECT-TYPE
Bgp4 Neighbor General Configuration table.
1.3.6.1.4.1.1991.1.2.11.6.1not-accessiblecurrent
snBgp4NeighGenCfgEntry
OBJECT-TYPE
An entry in the Bgp4 Community Filter table.
1.3.6.1.4.1.1991.1.2.11.6.1.1not-accessiblecurrent
snBgp4NeighGenCfgNeighIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.1991.1.2.11.6.1.1.1IpAddressread-onlycurrent
snBgp4NeighGenCfgAdvertlevel
OBJECT-TYPE
To set the minimum interval between the sending of BGP routing updates.
1.3.6.1.4.1.1991.1.2.11.6.1.1.2INTEGER (0..600)read-writecurrent
snBgp4NeighGenCfgDefOriginate
OBJECT-TYPE
To enable/disable the default originate for this neighbor.
1.3.6.1.4.1.1991.1.2.11.6.1.1.3INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4NeighGenCfgEbgpMultihop
OBJECT-TYPE
To enable/disable the EBGP Muitihop for this neighbor.
1.3.6.1.4.1.1991.1.2.11.6.1.1.4INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4NeighGenCfgMaxPrefix
OBJECT-TYPE
To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the maximum prefix is snBgp4GenOperRoutes.
1.3.6.1.4.1.1991.1.2.11.6.1.1.5Integer32read-writecurrent
snBgp4NeighGenCfgNextHopSelf
OBJECT-TYPE
To enable/disable the next-hop processing of BGP updates on the router.
1.3.6.1.4.1.1991.1.2.11.6.1.1.6INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4NeighGenCfgRemoteAs
OBJECT-TYPE
To specify a neighbor with an autonomous system number(AS).
1.3.6.1.4.1.1991.1.2.11.6.1.1.7INTEGER (1..65535)read-writecurrent
snBgp4NeighGenCfgSendComm
OBJECT-TYPE
To specify that a COMMUNITES attribute should be sent to a BGP neighbor.
1.3.6.1.4.1.1991.1.2.11.6.1.1.8INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4NeighGenCfgWeight
OBJECT-TYPE
To assign a weight to a neighbor connection.
1.3.6.1.4.1.1991.1.2.11.6.1.1.9INTEGER (0..65535)read-writecurrent
snBgp4NeighGenCfgWeightFilterList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.6.1.1.10OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighGenCfgRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row applyDefault(6)...apply default value to an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.6.1.1.11INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5), applyDefault(6)}read-writecurrent
snBgp4NeighGenCfgUpdateSrcLpbIntf
OBJECT-TYPE
To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the closest interface, which is called the best local address.
1.3.6.1.4.1.1991.1.2.11.6.1.1.12INTEGER (0..8)read-writecurrent
snBgp4NeighGenCfgRouteRefClient
OBJECT-TYPE
To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer a route reflector.
1.3.6.1.4.1.1991.1.2.11.6.1.1.13INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4NeighGenCfgRemovePrivateAs
OBJECT-TYPE
To enable/disable filtering private AS number.
1.3.6.1.4.1.1991.1.2.11.6.1.1.14INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4NeighGenCfgEbgpMultihopTtl
OBJECT-TYPE
The EBGP Muitihop TTL for this neighbor.
1.3.6.1.4.1.1991.1.2.11.6.1.1.15INTEGER (0..255)read-writecurrent
snBgp4NeighGenCfgShutdown
OBJECT-TYPE
To enable/disable BGP4 Nbr Shutdown.
1.3.6.1.4.1.1991.1.2.11.6.1.1.16INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4NeighGenCfgKeepAliveTime
OBJECT-TYPE
The Keep alive timer.
1.3.6.1.4.1.1991.1.2.11.6.1.1.17INTEGER (0..65535)read-writecurrent
snBgp4NeighGenCfgHoldTime
OBJECT-TYPE
The Hold time timer.
1.3.6.1.4.1.1991.1.2.11.6.1.1.18INTEGER (0..65535)read-writecurrent
snBgp4NeighGenCfgDefOrigMap
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.1991.1.2.11.6.1.1.19OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighGenCfgDesc
OBJECT-TYPE
An octet string of the neighbor description.
1.3.6.1.4.1.1991.1.2.11.6.1.1.20OCTET STRING (SIZE(0..80))read-writecurrent
snBgp4NeighGenCfgPass
OBJECT-TYPE
An octet string of the neighbor Md5 password.
1.3.6.1.4.1.1991.1.2.11.6.1.1.21OCTET STRING (SIZE(0..80))read-writecurrent
snBgp4NeighDistGroup
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.7
snBgp4NeighDistGroupTable
OBJECT-TYPE
Bgp4 Neighbor Distribute Group table.
1.3.6.1.4.1.1991.1.2.11.7.1not-accessiblecurrent
snBgp4NeighDistGroupEntry
OBJECT-TYPE
An entry in the Bgp4 Distribute Group table.
1.3.6.1.4.1.1991.1.2.11.7.1.1not-accessiblecurrent
snBgp4NeighDistGroupNeighIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.1991.1.2.11.7.1.1.1IpAddressread-onlycurrent
snBgp4NeighDistGroupDir
OBJECT-TYPE
The incoming/outgoing advertisements to which the access list is applied.
1.3.6.1.4.1.1991.1.2.11.7.1.1.2INTEGER {out(0), in(1)}read-onlycurrent
snBgp4NeighDistGroupAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.7.1.1.3OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighDistGroupRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.7.1.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snBgp4NeighDistGroupInFilterList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.7.1.1.5OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighDistGroupOutFilterList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.7.1.1.6OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighDistGroupInIpAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.7.1.1.7OCTET STRING (SIZE(0..2))read-writecurrent
snBgp4NeighDistGroupOutIpAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.7.1.1.8OCTET STRING (SIZE(0..2))read-writecurrent
snBgp4NeighDistGroupInPrefixList
OBJECT-TYPE
A Prefix name list.
1.3.6.1.4.1.1991.1.2.11.7.1.1.9OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighDistGroupOutPrefixList
OBJECT-TYPE
A Prefix name list.
1.3.6.1.4.1.1991.1.2.11.7.1.1.10OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighFilterGroup
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.8
snBgp4NeighFilterGroupTable
OBJECT-TYPE
Bgp4 Neighbor Filter Group table.
1.3.6.1.4.1.1991.1.2.11.8.1not-accessiblecurrent
snBgp4NeighFilterGroupEntry
OBJECT-TYPE
An entry in the Bgp4 Neighbor Filter Group table.
1.3.6.1.4.1.1991.1.2.11.8.1.1not-accessiblecurrent
snBgp4NeighFilterGroupNeighIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.1991.1.2.11.8.1.1.1IpAddressread-onlycurrent
snBgp4NeighFilterGroupDir
OBJECT-TYPE
The incoming/outgoing advertisements to which the access list is applied.
1.3.6.1.4.1.1991.1.2.11.8.1.1.2INTEGER {out(0), in(1)}read-onlycurrent
snBgp4NeighFilterGroupAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.8.1.1.3OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighFilterGroupRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.8.1.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snBgp4NeighFilterGroupInFilterList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.8.1.1.5OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighFilterGroupOutFilterList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.8.1.1.6OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighFilterGroupInAsPathAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.8.1.1.7OCTET STRING (SIZE(0..2))read-writecurrent
snBgp4NeighFilterGroupOutAsPathAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.8.1.1.8OCTET STRING (SIZE(0..2))read-writecurrent
snBgp4NeighFilterGroupWeight
OBJECT-TYPE
To assign a weight to a neighbor filter.
1.3.6.1.4.1.1991.1.2.11.8.1.1.9INTEGER (0..65535)read-writecurrent
snBgp4NeighFilterGroupWeightAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.8.1.1.10OCTET STRING (SIZE(0..2))read-writecurrent
snBgp4NeighRouteMap
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.9
snBgp4NeighRouteMapTable
OBJECT-TYPE
Bgp4 Neighbor Route Map table.
1.3.6.1.4.1.1991.1.2.11.9.1not-accessiblecurrent
snBgp4NeighRouteMapEntry
OBJECT-TYPE
An entry in the Bgp4 Route Map table.
1.3.6.1.4.1.1991.1.2.11.9.1.1not-accessiblecurrent
snBgp4NeighRouteMapNeighIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.1991.1.2.11.9.1.1.1IpAddressread-onlycurrent
snBgp4NeighRouteMapDir
OBJECT-TYPE
The incoming/outgoing advertisements to which the access list is applied.
1.3.6.1.4.1.1991.1.2.11.9.1.1.2INTEGER {out(0), in(1)}read-onlycurrent
snBgp4NeighRouteMapMapName
OBJECT-TYPE
An octet string of the route-map name, Each character of the name is represented by one octet.
1.3.6.1.4.1.1991.1.2.11.9.1.1.3OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighRouteMapRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.9.1.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snBgp4Network
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.10
snBgp4NetworkTable
OBJECT-TYPE
Bgp4 Network Weight table.
1.3.6.1.4.1.1991.1.2.11.10.1not-accessiblecurrent
snBgp4NetworkEntry
OBJECT-TYPE
An entry in the Bgp4 Network Weight table.
1.3.6.1.4.1.1991.1.2.11.10.1.1not-accessiblecurrent
snBgp4NetworkIp
OBJECT-TYPE
The IP Address for a network entry.
1.3.6.1.4.1.1991.1.2.11.10.1.1.1IpAddressread-onlycurrent
snBgp4NetworkSubnetMask
OBJECT-TYPE
The subnet mask for a network entry.
1.3.6.1.4.1.1991.1.2.11.10.1.1.2IpAddressread-onlycurrent
snBgp4NetworkWeight
OBJECT-TYPE
To assign a weight to a neighbor connection.
1.3.6.1.4.1.1991.1.2.11.10.1.1.3INTEGER (0..65535)read-writecurrent
snBgp4NetworkBackdoor
OBJECT-TYPE
To enable/disable the backdoor for this network.
1.3.6.1.4.1.1991.1.2.11.10.1.1.4INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4NetworkRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.10.1.1.5INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snBgp4Redis
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.11
snBgp4RedisTable
OBJECT-TYPE
The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain.
1.3.6.1.4.1.1991.1.2.11.11.1not-accessiblecurrent
snBgp4RedisEntry
OBJECT-TYPE
The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain.
1.3.6.1.4.1.1991.1.2.11.11.1.1not-accessiblecurrent
snBgp4RedisProtocol
OBJECT-TYPE
The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected. isis(5): - the ISIS.
1.3.6.1.4.1.1991.1.2.11.11.1.1.1INTEGER {rip(1), ospf(2), static(3), connected(4), isis(5)}read-onlycurrent
snBgp4RedisMetric
OBJECT-TYPE
The metric of using the specified protocol Metric value.
1.3.6.1.4.1.1991.1.2.11.11.1.1.2Integer32read-writecurrent
snBgp4RedisRouteMap
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.1991.1.2.11.11.1.1.3OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4RedisWeight
OBJECT-TYPE
To assign a weight for the specified protocol.
1.3.6.1.4.1.1991.1.2.11.11.1.1.4INTEGER (0..65535)read-writecurrent
snBgp4RedisMatchInternal
OBJECT-TYPE
This object is only applicable to the OSPF protocol.
1.3.6.1.4.1.1991.1.2.11.11.1.1.5INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4RedisMatchExternal1
OBJECT-TYPE
This object is only applicable to the OSPF protocol.
1.3.6.1.4.1.1991.1.2.11.11.1.1.6INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4RedisMatchExternal2
OBJECT-TYPE
This object is only applicable to the OSPF protocol.
1.3.6.1.4.1.1991.1.2.11.11.1.1.7INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4RedisRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.11.1.1.8INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snBgp4RouteMapFilter
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.12
snBgp4RouteMapFilterTable
OBJECT-TYPE
Bgp4 RouteMap Filter table.
1.3.6.1.4.1.1991.1.2.11.12.1not-accessiblecurrent
snBgp4RouteMapFilterEntry
OBJECT-TYPE
An entry in the Bgp4 RouteMap Filter table.
1.3.6.1.4.1.1991.1.2.11.12.1.1not-accessiblecurrent
snBgp4RouteMapFilterMapName
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.1991.1.2.11.12.1.1.1OCTET STRING (SIZE(0..32))read-onlycurrent
snBgp4RouteMapFilterSequenceNum
OBJECT-TYPE
A sequence number for this particular route-map.
1.3.6.1.4.1.1991.1.2.11.12.1.1.2Integer32read-onlycurrent
snBgp4RouteMapFilterAction
OBJECT-TYPE
Action to take if the bgp address match with this filter.
1.3.6.1.4.1.1991.1.2.11.12.1.1.3INTEGER {deny(0), permit(1)}read-writecurrent
snBgp4RouteMapFilterRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.12.1.1.4INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent
snBgp4RouteMapMatch
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.13
snBgp4RouteMapMatchTable
OBJECT-TYPE
Bgp4 Route Map Set table.
1.3.6.1.4.1.1991.1.2.11.13.1not-accessiblecurrent
snBgp4RouteMapMatchEntry
OBJECT-TYPE
An entry in the Bgp4 Route Map Match table.
1.3.6.1.4.1.1991.1.2.11.13.1.1not-accessiblecurrent
snBgp4RouteMapMatchMapName
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.1991.1.2.11.13.1.1.1OCTET STRING (SIZE(0..32))read-onlycurrent
snBgp4RouteMapMatchSequenceNum
OBJECT-TYPE
A sequence number for this particular route-map.
1.3.6.1.4.1.1991.1.2.11.13.1.1.2Integer32read-onlycurrent
snBgp4RouteMapMatchAsPathFilter
OBJECT-TYPE
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.3OCTET STRING (SIZE(0..20))read-writecurrent
snBgp4RouteMapMatchCommunityFilter
OBJECT-TYPE
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.4OCTET STRING (SIZE(0..20))read-writecurrent
snBgp4RouteMapMatchAddressFilter
OBJECT-TYPE
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.5OCTET STRING (SIZE(0..20))read-writecurrent
snBgp4RouteMapMatchMetric
OBJECT-TYPE
To match a metric for BGP routes.
1.3.6.1.4.1.1991.1.2.11.13.1.1.6Integer32read-writecurrent
snBgp4RouteMapMatchNextHopList
OBJECT-TYPE
A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.7OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4RouteMapMatchRouteType
OBJECT-TYPE
To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET.
1.3.6.1.4.1.1991.1.2.11.13.1.1.8INTEGER {none(0), external(1), externalType1(2), externalType2(3), internal(4), local(5)}read-writecurrent
snBgp4RouteMapMatchTagList
OBJECT-TYPE
To match a BGP tag access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.9OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4RouteMapMatchRowMask
OBJECT-TYPE
This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset
1.3.6.1.4.1.1991.1.2.11.13.1.1.10Integer32read-writecurrent
snBgp4RouteMapMatchAsPathAccessList
OBJECT-TYPE
A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.11OCTET STRING (SIZE(0..20))read-writecurrent
snBgp4RouteMapMatchCommunityList
OBJECT-TYPE
A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.12OCTET STRING (SIZE(0..20))read-writecurrent
snBgp4RouteMapMatchAddressAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.13OCTET STRING (SIZE(0..10))read-writecurrent
snBgp4RouteMapMatchAddressPrefixList
OBJECT-TYPE
Prefix list To match a BGP address access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.14OCTET STRING (SIZE(0..170))read-writecurrent
snBgp4RouteMapMatchNextHopAccessList
OBJECT-TYPE
A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.15OCTET STRING (SIZE(0..10))read-writecurrent
snBgp4RouteMapMatchNextHopPrefixList
OBJECT-TYPE
Prefix list To match a BGP address access list.
1.3.6.1.4.1.1991.1.2.11.13.1.1.16OCTET STRING (SIZE(0..170))read-writecurrent
snBgp4RouteMapSet
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.14
snBgp4RouteMapSetTable
OBJECT-TYPE
Bgp4 Route Map Set table.
1.3.6.1.4.1.1991.1.2.11.14.1not-accessiblecurrent
snBgp4RouteMapSetEntry
OBJECT-TYPE
An entry in the Bgp4 Route Map Set table.
1.3.6.1.4.1.1991.1.2.11.14.1.1not-accessiblecurrent
snBgp4RouteMapSetMapName
OBJECT-TYPE
An octet string of the route-map name, each character of the name is represented by one octet.
1.3.6.1.4.1.1991.1.2.11.14.1.1.1OCTET STRING (SIZE(0..32))read-onlycurrent
snBgp4RouteMapSetSequenceNum
OBJECT-TYPE
A sequence number for this particular route-map.
1.3.6.1.4.1.1991.1.2.11.14.1.1.2Integer32read-onlycurrent
snBgp4RouteMapSetAsPathType
OBJECT-TYPE
To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the as-path of the route that is matched by the route map.
1.3.6.1.4.1.1991.1.2.11.14.1.1.3INTEGER {tag(0), prepend(1)}read-writecurrent
snBgp4RouteMapSetAsPathString
OBJECT-TYPE
as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1).
1.3.6.1.4.1.1991.1.2.11.14.1.1.4OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4RouteMapSetAutoTag
OBJECT-TYPE
To enable/disable the automatic-tag for BGP routes.
1.3.6.1.4.1.1991.1.2.11.14.1.1.5INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4RouteMapSetCommunityType
OBJECT-TYPE
To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 are not valid since 5.03.00
1.3.6.1.4.1.1991.1.2.11.14.1.1.6INTEGER {nums(0), none(3)}read-writecurrent
snBgp4RouteMapSetCommunityNum
OBJECT-TYPE
community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0).
1.3.6.1.4.1.1991.1.2.11.14.1.1.7Integer32read-writedeprecated
snBgp4RouteMapSetCommunityAdditive
OBJECT-TYPE
To add the community to the already existing communities.
1.3.6.1.4.1.1991.1.2.11.14.1.1.8INTEGER {disabled(0), enabled(1)}read-writecurrent
snBgp4RouteMapSetLocalPreference
OBJECT-TYPE
To modify a local-preference for BGP routes.
1.3.6.1.4.1.1991.1.2.11.14.1.1.9Integer32read-writecurrent
snBgp4RouteMapSetMetric
OBJECT-TYPE
To modify a metric for BGP routes.
1.3.6.1.4.1.1991.1.2.11.14.1.1.10Integer32read-writecurrent
snBgp4RouteMapSetNextHop
OBJECT-TYPE
To modify the IP address of the next hop for BGP routes.
1.3.6.1.4.1.1991.1.2.11.14.1.1.11IpAddressread-writecurrent
snBgp4RouteMapSetOrigin
OBJECT-TYPE
To set the BGP origin code.
1.3.6.1.4.1.1991.1.2.11.14.1.1.12INTEGER {igp(0), egp(1), incomplete(2)}read-writecurrent
snBgp4RouteMapSetTag
OBJECT-TYPE
To specify the tag for BGP routes.
1.3.6.1.4.1.1991.1.2.11.14.1.1.13Integer32read-writecurrent
snBgp4RouteMapSetWeight
OBJECT-TYPE
To specify the BGP weight for the routing table.
1.3.6.1.4.1.1991.1.2.11.14.1.1.14INTEGER (0..65535)read-writecurrent
snBgp4RouteMapSetRowMask
OBJECT-TYPE
This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset
1.3.6.1.4.1.1991.1.2.11.14.1.1.15Integer32read-writecurrent
snBgp4RouteMapSetCommunityNums
OBJECT-TYPE
Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs.
1.3.6.1.4.1.1991.1.2.11.14.1.1.16OCTET STRING (SIZE(0..24))read-writecurrent
snBgp4RouteMapSetDampenHalfLife
OBJECT-TYPE
Bgp4 Route Map Dampening Half Life.
1.3.6.1.4.1.1991.1.2.11.14.1.1.17INTEGER (1..45)read-writecurrent
snBgp4RouteMapSetDampenReuse
OBJECT-TYPE
Bgp4 Route Map Dampening Reuse.
1.3.6.1.4.1.1991.1.2.11.14.1.1.18INTEGER (1..20000)read-writecurrent
snBgp4RouteMapSetDampenSuppress
OBJECT-TYPE
Bgp4 Route Map Dampening Suppress.
1.3.6.1.4.1.1991.1.2.11.14.1.1.19INTEGER (1..20000)read-writecurrent
snBgp4RouteMapSetDampenMaxSuppress
OBJECT-TYPE
Bgp4 Route Map Dampening Max Suppress Time.
1.3.6.1.4.1.1991.1.2.11.14.1.1.20INTEGER (1..20000)read-writecurrent
snBgp4NeighOperStatus
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.15
snBgp4NeighOperStatusTable
OBJECT-TYPE
Bgp4 Neighbor Operational Status table.
1.3.6.1.4.1.1991.1.2.11.15.1not-accessiblecurrent
snBgp4NeighOperStatusEntry
OBJECT-TYPE
An entry in the Bgp4 Operational Status table.
1.3.6.1.4.1.1991.1.2.11.15.1.1not-accessiblecurrent
snBgp4NeighOperStatusIndex
OBJECT-TYPE
The index for a neighbor entry.
1.3.6.1.4.1.1991.1.2.11.15.1.1.1Integer32read-onlycurrent
snBgp4NeighOperStatusIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.1991.1.2.11.15.1.1.2IpAddressread-onlycurrent
snBgp4NeighOperStatusRemoteAs
OBJECT-TYPE
To show a neighbor with an autonomous system number(AS).
1.3.6.1.4.1.1991.1.2.11.15.1.1.3Integer32read-onlycurrent
snBgp4NeighOperStatusBgpType
OBJECT-TYPE
To show the type of BGP protocol whether is internal or external.
1.3.6.1.4.1.1991.1.2.11.15.1.1.4INTEGER {ebgp(0), ibgp(1)}read-onlycurrent
snBgp4NeighOperStatusState
OBJECT-TYPE
To show the state of this neighbor.
1.3.6.1.4.1.1991.1.2.11.15.1.1.5INTEGER {noState(0), idle(1), connect(2), active(3), openSent(4), openConfirm(5), established(6)}read-onlycurrent
snBgp4NeighOperStatusKeepAliveTime
OBJECT-TYPE
The Keep alive timer.
1.3.6.1.4.1.1991.1.2.11.15.1.1.6Integer32read-onlycurrent
snBgp4NeighOperStatusHoldTime
OBJECT-TYPE
The Hold time timer.
1.3.6.1.4.1.1991.1.2.11.15.1.1.7Integer32read-onlycurrent
snBgp4NeighOperStatusAdvertlevel
OBJECT-TYPE
To show the minimum interval between the sending of BGP routing updates.
1.3.6.1.4.1.1991.1.2.11.15.1.1.8Integer32read-onlycurrent
snBgp4NeighOperStatusKeepAliveTxCounts
OBJECT-TYPE
Keep alive message sent counts.
1.3.6.1.4.1.1991.1.2.11.15.1.1.9Counter32read-onlycurrent
snBgp4NeighOperStatusKeepAliveRxCounts
OBJECT-TYPE
Keep alive message received counts.
1.3.6.1.4.1.1991.1.2.11.15.1.1.10Counter32read-onlycurrent
snBgp4NeighOperStatusUpdateTxCounts
OBJECT-TYPE
Update message sent counts.
1.3.6.1.4.1.1991.1.2.11.15.1.1.11Counter32read-onlycurrent
snBgp4NeighOperStatusUpdateRxCounts
OBJECT-TYPE
Update message received counts.
1.3.6.1.4.1.1991.1.2.11.15.1.1.12Counter32read-onlycurrent
snBgp4NeighOperStatusNotifTxCounts
OBJECT-TYPE
Notification message sent counts.
1.3.6.1.4.1.1991.1.2.11.15.1.1.13Counter32read-onlycurrent
snBgp4NeighOperStatusNotifRxCounts
OBJECT-TYPE
Notification message received counts.
1.3.6.1.4.1.1991.1.2.11.15.1.1.14Counter32read-onlycurrent
snBgp4NeighOperStatusOpenTxCounts
OBJECT-TYPE
Open message sent counts.
1.3.6.1.4.1.1991.1.2.11.15.1.1.15Counter32read-onlycurrent
snBgp4NeighOperStatusOpenRxCounts
OBJECT-TYPE
Open message received counts.
1.3.6.1.4.1.1991.1.2.11.15.1.1.16Counter32read-onlycurrent
snBgp4RouteOperStatus
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.16
snBgp4RouteOperStatusTable
OBJECT-TYPE
Bgp4 Routebor Operational Status table.
1.3.6.1.4.1.1991.1.2.11.16.1not-accessiblecurrent
snBgp4RouteOperStatusEntry
OBJECT-TYPE
An entry in the Bgp4 Operational Status table.
1.3.6.1.4.1.1991.1.2.11.16.1.1not-accessiblecurrent
snBgp4RouteOperStatusIndex
OBJECT-TYPE
The index for a route entry.
1.3.6.1.4.1.1991.1.2.11.16.1.1.1Integer32read-onlycurrent
snBgp4RouteOperStatusIp
OBJECT-TYPE
The IP Address for a route entry.
1.3.6.1.4.1.1991.1.2.11.16.1.1.2IpAddressread-onlycurrent
snBgp4RouteOperStatusSubnetMask
OBJECT-TYPE
The IP Subnet Mask for a route entry.
1.3.6.1.4.1.1991.1.2.11.16.1.1.3IpAddressread-onlycurrent
snBgp4RouteOperStatusNextHop
OBJECT-TYPE
The next-hop IP for a route entry.
1.3.6.1.4.1.1991.1.2.11.16.1.1.4IpAddressread-onlycurrent
snBgp4RouteOperStatusMetric
OBJECT-TYPE
To show the metric value of a route entry.
1.3.6.1.4.1.1991.1.2.11.16.1.1.5Integer32read-onlycurrent
snBgp4RouteOperStatusLocalPreference
OBJECT-TYPE
To show the local preference of a route entry.
1.3.6.1.4.1.1991.1.2.11.16.1.1.6Integer32read-onlycurrent
snBgp4RouteOperStatusWeight
OBJECT-TYPE
To show the weight of this route.
1.3.6.1.4.1.1991.1.2.11.16.1.1.7Integer32read-onlycurrent
snBgp4RouteOperStatusOrigin
OBJECT-TYPE
To show the origin of this route.
1.3.6.1.4.1.1991.1.2.11.16.1.1.8INTEGER {igp(0), egp(1), incomplete(2)}read-onlycurrent
snBgp4RouteOperStatusStatus
OBJECT-TYPE
A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant bit and 0=FALSE, 1=TRUE). bit position meaning ------------ ------- 6-31 reserved. 5 aggregate. 4 best. 3 internal. 2 local. 1 suppressed. 0 valid.
1.3.6.1.4.1.1991.1.2.11.16.1.1.9Integer32read-onlycurrent
snBgp4RouteOperStatusRouteTag
OBJECT-TYPE
To show the route tag of this route.
1.3.6.1.4.1.1991.1.2.11.16.1.1.10Integer32read-onlycurrent
snBgp4RouteOperStatusCommunityList
OBJECT-TYPE
To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02
1.3.6.1.4.1.1991.1.2.11.16.1.1.11OCTET STRINGread-onlycurrent
snBgp4RouteOperStatusAsPathList
OBJECT-TYPE
To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.16.1.1.12OCTET STRINGread-onlycurrent
snBgp4NeighborSummary
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.17
snBgp4NeighborSummaryTable
OBJECT-TYPE
Bgp4 Routebor Operational Status table.
1.3.6.1.4.1.1991.1.2.11.17.1not-accessiblecurrent
snBgp4NeighborSummaryEntry
OBJECT-TYPE
An entry in the Bgp4 Operational Status table.
1.3.6.1.4.1.1991.1.2.11.17.1.1not-accessiblecurrent
snBgp4NeighborSummaryIndex
OBJECT-TYPE
The index for a route entry.
1.3.6.1.4.1.1991.1.2.11.17.1.1.1Integer32read-onlycurrent
snBgp4NeighborSummaryIp
OBJECT-TYPE
The IP Address for a route entry.
1.3.6.1.4.1.1991.1.2.11.17.1.1.2IpAddressread-onlycurrent
snBgp4NeighborSummaryState
OBJECT-TYPE
To show the state of this neighbor.
1.3.6.1.4.1.1991.1.2.11.17.1.1.3INTEGER {noState(0), idle(1), connect(2), active(3), openSent(4), openConfirm(5), established(6)}read-onlycurrent
snBgp4NeighborSummaryStateChgTime
OBJECT-TYPE
The time of a change of the state of this neighbor.
1.3.6.1.4.1.1991.1.2.11.17.1.1.4Integer32read-onlycurrent
snBgp4NeighborSummaryRouteReceived
OBJECT-TYPE
The number of routes received of this neighbor.
1.3.6.1.4.1.1991.1.2.11.17.1.1.5Integer32read-onlycurrent
snBgp4NeighborSummaryRouteInstalled
OBJECT-TYPE
The number of routes installed of this neighbor.
1.3.6.1.4.1.1991.1.2.11.17.1.1.6Integer32read-onlycurrent
snBgp4Attribute
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.18
snBgp4AttributeTable
OBJECT-TYPE
Bgp4 Attribute entries table.
1.3.6.1.4.1.1991.1.2.11.18.1not-accessiblecurrent
snBgp4AttributeEntry
OBJECT-TYPE
An entry in the Bgp4 Attribute table.
1.3.6.1.4.1.1991.1.2.11.18.1.1not-accessiblecurrent
snBgp4AttributeIndex
OBJECT-TYPE
The index for a route entry.
1.3.6.1.4.1.1991.1.2.11.18.1.1.1Integer32read-onlycurrent
snBgp4AttributeNextHop
OBJECT-TYPE
The next-hop IP for a route entry.
1.3.6.1.4.1.1991.1.2.11.18.1.1.2IpAddressread-onlycurrent
snBgp4AttributeMetric
OBJECT-TYPE
To show the metric value of a route entry.
1.3.6.1.4.1.1991.1.2.11.18.1.1.3Integer32read-onlycurrent
snBgp4AttributeOrigin
OBJECT-TYPE
To show the origin of this route.
1.3.6.1.4.1.1991.1.2.11.18.1.1.4INTEGER {igp(0), egp(1), incomplete(2)}read-onlycurrent
snBgp4AttributeAggregatorAs
OBJECT-TYPE
The aggregator AS number for an attribute entry.
1.3.6.1.4.1.1991.1.2.11.18.1.1.5Integer32read-onlycurrent
snBgp4AttributeRouterId
OBJECT-TYPE
The router ID for an attribute entry.
1.3.6.1.4.1.1991.1.2.11.18.1.1.6IpAddressread-onlycurrent
snBgp4AttributeAtomicAggregatePresent
OBJECT-TYPE
The atomic aggregate present in an attribute entry.
1.3.6.1.4.1.1991.1.2.11.18.1.1.7INTEGER {false(0), true(1)}read-onlycurrent
snBgp4AttributeLocalPreference
OBJECT-TYPE
To show the local preference of a route entry.
1.3.6.1.4.1.1991.1.2.11.18.1.1.8Integer32read-onlycurrent
snBgp4AttributeCommunityList
OBJECT-TYPE
To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02
1.3.6.1.4.1.1991.1.2.11.18.1.1.9OCTET STRINGread-onlycurrent
snBgp4AttributeAsPathList
OBJECT-TYPE
To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs.
1.3.6.1.4.1.1991.1.2.11.18.1.1.10OCTET STRINGread-onlycurrent
snBgp4AttributeOriginator
OBJECT-TYPE
The originator IP address for an attribute entry.
1.3.6.1.4.1.1991.1.2.11.18.1.1.11IpAddressread-onlycurrent
snBgp4AttributeClusterList
OBJECT-TYPE
To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address.
1.3.6.1.4.1.1991.1.2.11.18.1.1.12OCTET STRINGread-onlycurrent
snBgp4ClearNeighborCmd
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.19
snBgp4ClearNeighborCmdTable
OBJECT-TYPE
Clear Bgp4 command table.
1.3.6.1.4.1.1991.1.2.11.19.1not-accessiblecurrent
snBgp4ClearNeighborCmdEntry
OBJECT-TYPE
An entry in the clear Bgp4 neighbor command table.
1.3.6.1.4.1.1991.1.2.11.19.1.1not-accessiblecurrent
snBgp4ClearNeighborCmdIp
OBJECT-TYPE
The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors.
1.3.6.1.4.1.1991.1.2.11.19.1.1.1IpAddressread-onlycurrent
snBgp4ClearNeighborCmdElement
OBJECT-TYPE
To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get.
1.3.6.1.4.1.1991.1.2.11.19.1.1.2INTEGER {valid(0), lastPacketWithError(1), notificationErrors(2), softOutbound(3), traffic(4), neighbor(5)}read-writecurrent
snBgp4NeighPrefixGroup
OBJECT-IDENTITY
1.3.6.1.4.1.1991.1.2.11.20
snBgp4NeighPrefixGroupTable
OBJECT-TYPE
Bgp4 Neighbor Prefix Group table.
1.3.6.1.4.1.1991.1.2.11.20.1not-accessiblecurrent
snBgp4NeighPrefixGroupEntry
OBJECT-TYPE
An entry in the Bgp4 Prefix Group table.
1.3.6.1.4.1.1991.1.2.11.20.1.1not-accessiblecurrent
snBgp4NeighPrefixGroupNeighIp
OBJECT-TYPE
The IP Address for a neighbor entry.
1.3.6.1.4.1.1991.1.2.11.20.1.1.1IpAddressread-onlycurrent
snBgp4NeighPrefixGroupDir
OBJECT-TYPE
The incoming/outgoing advertisements to which the access list is applied.
1.3.6.1.4.1.1991.1.2.11.20.1.1.2INTEGER {out(0), in(1)}read-onlycurrent
snBgp4NeighPrefixGroupInAccessList
OBJECT-TYPE
An in access prefix list name.
1.3.6.1.4.1.1991.1.2.11.20.1.1.3OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighPrefixGroupOutAccessList
OBJECT-TYPE
An out prefix list name.
1.3.6.1.4.1.1991.1.2.11.20.1.1.4OCTET STRING (SIZE(0..32))read-writecurrent
snBgp4NeighPrefixGroupRowStatus
OBJECT-TYPE
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
1.3.6.1.4.1.1991.1.2.11.20.1.1.5INTEGER {invalid(1), valid(2), delete(3), create(4), modify(5)}read-writecurrent