MIBs Depot

FORCE10-BGP4-V2-MIB

Last updated
2007-04-27 12:00
Organization
IETF IDR Working Group
Revisions
2007-04-27 12:00
Namespace
dell
Source file
FORCE10-BGP4-V2-MIB
Digest
sha256:dba19f1351d0dbef2404278b84e3ce3fead139068bd0823ed74fedb1888ec04c

Description

This MIB module defines management objects for the Border Gateway Protocol, Version 4.

Contact

E-mail: idr@merit.net Jeffrey Haas (Editor) 825 Victors Way, Suite 100 Ann Arbor, MI 48108 Tel: +1 734 222-1600 Fax: +1 734 222-1602 E-mail: jhaas@nexthop.com

Imports

FromSymbols
FORCE10-SMIf10Experiment
INET-ADDRESS-MIBInetAddress, InetAddressPrefixLength, InetAddressType, InetAutonomousSystemNumber, InetPortNumber
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2
SNMPv2-TCDisplayString, RowPointer, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

FORCE10-BGP4-V2-MIB
FORCE10-SMI
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
F10BgpM2Afi
TEXTUAL-CONVENTION
The representation of a BGP AFI
current
F10BgpM2Community
TEXTUAL-CONVENTION
The representation of a BGP Community.
current
F10BgpM2ExtendedCommunity
TEXTUAL-CONVENTION
The representation of a BGP Extended Community.
current
F10BgpM2Identifier
TEXTUAL-CONVENTION
The representation of a BGP Identifier. The BGP Identifier should be represented in the OCTET STRING as with the first OCTET of the string containing the first OCTET of the BGP Identifier received or sent in the OPEN packet and so on. Even though the BGP Identifier is trending away from an IP address it is still displayed as if it was one, even when it would be an illegal IP address.
current
F10BgpM2Safi
TEXTUAL-CONVENTION
The representation of a BGP SAFI
current

Objects

NameOIDSyntaxAccessStatus
f10BgpM2BaseScalars
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1
f10BgpM2BaseNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.0
f10BgpM2Version
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.1
f10BgpM2VersionTable
OBJECT-TYPE
Table of supported BGP versions.
1.3.6.1.4.1.6027.20.1.1.1.1not-accessiblecurrent
f10BgpM2VersionEntry
OBJECT-TYPE
Entry containing data on a given supported version of the Border Gateway Protocol and the level of support provided. It is expected that any agent implementation supporting this MIB module will report support for Version 4 of the Border Gateway Protocol at the very minimum.
1.3.6.1.4.1.6027.20.1.1.1.1.1not-accessiblecurrent
f10BgpM2VersionIndex
OBJECT-TYPE
The version number of the BGP Protocol.
1.3.6.1.4.1.6027.20.1.1.1.1.1.1Unsigned32 (0..255)read-onlycurrent
f10BgpM2VersionSupported
OBJECT-TYPE
This value is TRUE if this version of the BGP protocol identified in 'f10BgpM2VersionIndex' is supported. The absence of a row for a particular f10BgpM2VersionIndex indicates that that f10BgpM2VersionIndex protocol version number is not supported.
1.3.6.1.4.1.6027.20.1.1.1.1.1.2TruthValueread-onlycurrent
f10BgpM2SupportedCapabilities
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.2
f10BgpM2CapabilitySupportAvailable
OBJECT-TYPE
This value is TRUE if capability support is available and is enabled.
1.3.6.1.4.1.6027.20.1.1.2.1TruthValueread-onlycurrent
f10BgpM2SupportedCapabilitiesTable
OBJECT-TYPE
Table of supported BGP-4 capabilities.
1.3.6.1.4.1.6027.20.1.1.2.2not-accessiblecurrent
f10BgpM2SupportedCapabilitiesEntry
OBJECT-TYPE
Information about supported capabilities indexed by capability number.
1.3.6.1.4.1.6027.20.1.1.2.2.1not-accessiblecurrent
f10BgpM2SupportedCapabilityCode
OBJECT-TYPE
Index of supported capability. The index directly corresponds with the BGP-4 Capability Advertisement Capability Code.
1.3.6.1.4.1.6027.20.1.1.2.2.1.1Unsigned32 (0..255)read-onlycurrent
f10BgpM2SupportedCapability
OBJECT-TYPE
This value is True if this capability is supported, False otherwise.
1.3.6.1.4.1.6027.20.1.1.2.2.1.2TruthValueread-onlycurrent
f10BgpM2AsSize
OBJECT-TYPE
The size of the AS value in this implementation. The semantics of this are determined as per the as-4bytes draft.
1.3.6.1.4.1.6027.20.1.1.4INTEGER {twoOctet(1), fourOctet(2)}read-onlycurrent
f10BgpM2LocalAs
OBJECT-TYPE
The local autonomous system number. If the f10BgpM2AsSize is twoOctet, then the range is constrained to be 0-65535.
1.3.6.1.4.1.6027.20.1.1.5InetAutonomousSystemNumberread-onlycurrent
f10BgpM2LocalIdentifier
OBJECT-TYPE
The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier.
1.3.6.1.4.1.6027.20.1.1.6F10BgpM2Identifierread-onlycurrent
f10BgpM2BaseScalarExtensions
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.7
f10BgpM2BaseScalarNonCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.7.1
f10BgpM2BaseScalarRouteReflectExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.7.1.2796
f10BgpM2RouteReflector
OBJECT-TYPE
This value is TRUE if this implementation supports the BGP Route Reflection Extension and is enabled as a route reflector. If the BGP Route Reflection extension is not supported this value must be FALSE.
1.3.6.1.4.1.6027.20.1.1.7.1.2796.1TruthValueread-onlycurrent
f10BgpM2ClusterId
OBJECT-TYPE
The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's F10BgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled.
1.3.6.1.4.1.6027.20.1.1.7.1.2796.2F10BgpM2Identifierread-onlycurrent
f10BgpM2BaseScalarASConfedExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.7.1.3065
f10BgpM2ConfederationRouter
OBJECT-TYPE
This value is TRUE if this implementation supports the BGP AS Confederations Extension and this router is configured to be in a confederation.
1.3.6.1.4.1.6027.20.1.1.7.1.3065.1TruthValueread-onlycurrent
f10BgpM2ConfederationId
OBJECT-TYPE
The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router.
1.3.6.1.4.1.6027.20.1.1.7.1.3065.2InetAutonomousSystemNumberread-onlycurrent
f10BgpM2BaseScalarCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.7.2
f10BgpM2BaseScalarConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.8
f10BgpM2CfgBaseScalarStorageType
OBJECT-TYPE
This object specifies the intended storage type for all configurable base scalars.
1.3.6.1.4.1.6027.20.1.1.8.1StorageTyperead-writecurrent
f10BgpM2CfgLocalAs
OBJECT-TYPE
The local autonomous system number. If the f10BgpM2AsSize is twoOctet, then the range is constrained to be 0-65535.
1.3.6.1.4.1.6027.20.1.1.8.2InetAutonomousSystemNumberread-writecurrent
f10BgpM2CfgLocalIdentifier
OBJECT-TYPE
The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier.
1.3.6.1.4.1.6027.20.1.1.8.3F10BgpM2Identifierread-writecurrent
f10BgpM2CfgBaseScalarExtensions
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.8.4
f10BgpM2CfgBaseScalarNonCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.8.4.1
f10BgpM2CfgBaseScalarReflectorExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.8.4.1.2796
f10BgpM2CfgRouteReflector
OBJECT-TYPE
This value is set to true if this implementation will be supporting route reflection.
1.3.6.1.4.1.6027.20.1.1.8.4.1.2796.1TruthValueread-writecurrent
f10BgpM2CfgClusterId
OBJECT-TYPE
The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's F10BgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled.
1.3.6.1.4.1.6027.20.1.1.8.4.1.2796.2F10BgpM2Identifierread-writecurrent
f10BgpM2CfgBaseScalarASConfedExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.8.4.1.3065
f10BgpM2CfgConfederationRouter
OBJECT-TYPE
This value is set to true if this implementation will be supporting BGP AS Confederations.
1.3.6.1.4.1.6027.20.1.1.8.4.1.3065.1TruthValueread-writecurrent
f10BgpM2CfgConfederationId
OBJECT-TYPE
The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router.
1.3.6.1.4.1.6027.20.1.1.8.4.1.3065.2InetAutonomousSystemNumberread-writecurrent
f10BgpM2CfgBaseScalarCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.1.8.4.2
f10BgpM2Peer
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2
f10BgpM2PeerData
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.1
f10BgpM2PeerTable
OBJECT-TYPE
BGP peer table. This table contains, one entry per remote BGP peer, any information about the connections with the remote BGP peers.
1.3.6.1.4.1.6027.20.1.2.1.1not-accessiblecurrent
f10BgpM2PeerEntry
OBJECT-TYPE
Entry containing information about the connection with a remote BGP peer.
1.3.6.1.4.1.6027.20.1.2.1.1.1not-accessiblecurrent
f10BgpM2PeerInstance
OBJECT-TYPE
The routing instance index. Some BGP implementations permit the creation of multiple instances of a BGP routing process. An example includes RFC 2547 PE-CE routers. Implementations that do not support multiple routing instances should return 1 for this object. XXX TODO - We need to provide a way to configure these in the peer configuration table.
1.3.6.1.4.1.6027.20.1.2.1.1.1.1Unsigned32read-onlycurrent
f10BgpM2PeerIdentifier
OBJECT-TYPE
The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the f10BgpM2PeerState is in the OpenConfirm or the Established state.
1.3.6.1.4.1.6027.20.1.2.1.1.1.2F10BgpM2Identifierread-onlycurrent
f10BgpM2PeerState
OBJECT-TYPE
The remote BGP peer's FSM state.
1.3.6.1.4.1.6027.20.1.2.1.1.1.3INTEGER {idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)}read-onlycurrent
f10BgpM2PeerStatus
OBJECT-TYPE
Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The f10BgpM2PeerState will generally be in the idle state when the FSM is halted, although some extensions such as Graceful Restart will leave the peer in the Idle state but with the FSM running.
1.3.6.1.4.1.6027.20.1.2.1.1.1.4INTEGER {halted(1), running(2)}read-onlycurrent
f10BgpM2PeerConfiguredVersion
OBJECT-TYPE
The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol.
1.3.6.1.4.1.6027.20.1.2.1.1.1.5Unsigned32 (1..255)read-onlycurrent
f10BgpM2PeerNegotiatedVersion
OBJECT-TYPE
The negotiated version of BGP running between the two peers.
1.3.6.1.4.1.6027.20.1.2.1.1.1.6Unsigned32 (1..255)read-onlycurrent
f10BgpM2PeerLocalAddrType
OBJECT-TYPE
The address family of the local end of the peering session.
1.3.6.1.4.1.6027.20.1.2.1.1.1.7InetAddressTyperead-onlycurrent
f10BgpM2PeerLocalAddr
OBJECT-TYPE
The address of the local end of the peering session.
1.3.6.1.4.1.6027.20.1.2.1.1.1.8InetAddress (SIZE(4..20))read-onlycurrent
f10BgpM2PeerLocalPort
OBJECT-TYPE
The local port for the TCP connection between the BGP peers.
1.3.6.1.4.1.6027.20.1.2.1.1.1.9InetPortNumberread-onlycurrent
f10BgpM2PeerLocalAs
OBJECT-TYPE
Some implementations of BGP can represent themselves as multiple ASs. This is the AS that this peering session is representing itself as to the remote peer.
1.3.6.1.4.1.6027.20.1.2.1.1.1.10InetAutonomousSystemNumberread-onlycurrent
f10BgpM2PeerRemoteAddrType
OBJECT-TYPE
The address family of the remote end of the peering session.
1.3.6.1.4.1.6027.20.1.2.1.1.1.11InetAddressTyperead-onlycurrent
f10BgpM2PeerRemoteAddr
OBJECT-TYPE
The address of the remote end of the peering session.
1.3.6.1.4.1.6027.20.1.2.1.1.1.12InetAddress (SIZE(4..20))read-onlycurrent
f10BgpM2PeerRemotePort
OBJECT-TYPE
The remote port for the TCP connection between the BGP peers. In the case of a transport for which the notion of 'port' is irrelevant, an instance value of -1 should be returned by the agent for this object. Note that the objects f10BgpM2PeerLocalAddr, f10BgpM2PeerLocalPort, f10BgpM2PeerRemoteAddr and f10BgpM2PeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. or even the ipv6 TCP MIB as in rfc2452.
1.3.6.1.4.1.6027.20.1.2.1.1.1.13InetPortNumberread-onlycurrent
f10BgpM2PeerRemoteAs
OBJECT-TYPE
The remote autonomous system number.
1.3.6.1.4.1.6027.20.1.2.1.1.1.14InetAutonomousSystemNumberread-onlycurrent
f10BgpM2PeerIndex
OBJECT-TYPE
This value is a unique index for the remote peer entry in the f10BgpM2PeerTable. It is assigned by the agent at the point of creation of the f10BgpM2PeerTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2PeerIndex row instance values across rows of the f10BgpM2PeerTable. It is used to provide an index structure for other tables whose data is logically per-peer. For explicitly configured peers, this value will remain consistent until this row is deleted by deleting the configured peers. Unconfigured peers will generate a monotonically increasing number when a BGP FSM is built to process the peering session. Values in the f10BgpM2PeerTable and other tables utilizing f10BgpM2PeerIndex are expected to remain in existence for an arbitrary time after the unconfigured peer has been deleted in order to allow management applications to extract useful management information for those peers. Thus, an unconfigured peer using the same indices as the f10BgpM2PeerTable that comes up while this row still exists will re-utilize the same row.
1.3.6.1.4.1.6027.20.1.2.1.1.1.15Unsigned32read-onlycurrent
f10BgpM2PeerErrors
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.2
f10BgpM2PeerErrorsTable
OBJECT-TYPE
On a per peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. If no entry for a given peer, by its f10BgpM2PeerIndex, exists in this table, then no such errors have been observed, reported, and recorded on the session.
1.3.6.1.4.1.6027.20.1.2.2.1not-accessiblecurrent
f10BgpM2PeerErrorsEntry
OBJECT-TYPE
Each entry contains information about errors sent and received for a particular BGP peer.
1.3.6.1.4.1.6027.20.1.2.2.1.1not-accessiblecurrent
f10BgpM2PeerLastErrorReceived
OBJECT-TYPE
The last error code and subcode received by this BGP Speaker via a NOTIFICATION message for this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
1.3.6.1.4.1.6027.20.1.2.2.1.1.1OCTET STRING (SIZE(2))read-onlycurrent
f10BgpM2PeerLastErrorSent
OBJECT-TYPE
The last error code and subcode sent by this BGP Speaker via a NOTIFICATION message to this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
1.3.6.1.4.1.6027.20.1.2.2.1.1.2OCTET STRING (SIZE(2))read-onlycurrent
f10BgpM2PeerLastErrorReceivedTime
OBJECT-TYPE
The timestamp that the last NOTIFICATION was received from this peer.
1.3.6.1.4.1.6027.20.1.2.2.1.1.3TimeTicksread-onlycurrent
f10BgpM2PeerLastErrorSentTime
OBJECT-TYPE
The timestamp that the last NOTIFICATION was sent to this peer.
1.3.6.1.4.1.6027.20.1.2.2.1.1.4TimeTicksread-onlycurrent
f10BgpM2PeerLastErrorReceivedText
OBJECT-TYPE
This object contains an implementation specific explanation of the error that was reported.
1.3.6.1.4.1.6027.20.1.2.2.1.1.5SnmpAdminStringread-onlycurrent
f10BgpM2PeerLastErrorSentText
OBJECT-TYPE
This object contains an implementation specific explanation of the error that is being reported.
1.3.6.1.4.1.6027.20.1.2.2.1.1.6SnmpAdminStringread-onlycurrent
f10BgpM2PeerLastErrorReceivedData
OBJECT-TYPE
The last error code's data seen by this peer.
1.3.6.1.4.1.6027.20.1.2.2.1.1.7OCTET STRING (SIZE(0..4075))read-onlycurrent
f10BgpM2PeerLastErrorSentData
OBJECT-TYPE
The last error code's data sent to this peer.
1.3.6.1.4.1.6027.20.1.2.2.1.1.8OCTET STRING (SIZE(0..4075))read-onlycurrent
f10BgpM2PeerTimers
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.3
f10BgpM2PeerEventTimesTable
OBJECT-TYPE
A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the Established state.
1.3.6.1.4.1.6027.20.1.2.3.1not-accessiblecurrent
f10BgpM2PeerEventTimesEntry
OBJECT-TYPE
Each row contains a set of statistics about time spent and events encountered in the peer session Established state.
1.3.6.1.4.1.6027.20.1.2.3.1.1not-accessiblecurrent
f10BgpM2PeerFsmEstablishedTime
OBJECT-TYPE
This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.
1.3.6.1.4.1.6027.20.1.2.3.1.1.1Gauge32read-onlycurrent
f10BgpM2PeerInUpdatesElapsedTime
OBJECT-TYPE
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time f10BgpM2PeerInUpdates is incremented, the value of this object is set to zero (0). This value shall also be zero (0) when the peer is not in the Established state
1.3.6.1.4.1.6027.20.1.2.3.1.1.2Gauge32read-onlycurrent
f10BgpM2PeerConfiguredTimersTable
OBJECT-TYPE
Per peer management data on BGP session timers.
1.3.6.1.4.1.6027.20.1.2.3.2not-accessiblecurrent
f10BgpM2PeerConfiguredTimersEntry
OBJECT-TYPE
Each entry corresponds to the current state of BGP timers on a given peering session.
1.3.6.1.4.1.6027.20.1.2.3.2.1not-accessiblecurrent
f10BgpM2PeerConnectRetryInterval
OBJECT-TYPE
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
1.3.6.1.4.1.6027.20.1.2.3.2.1.1Unsigned32 (1..65535)read-onlycurrent
f10BgpM2PeerHoldTimeConfigured
OBJECT-TYPE
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (f10BgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
1.3.6.1.4.1.6027.20.1.2.3.2.1.2Unsigned32 (0 | 3..65535)read-onlycurrent
f10BgpM2PeerKeepAliveConfigured
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in f10BgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by f10BgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of f10BgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.6027.20.1.2.3.2.1.3Unsigned32 (0 | 1..21845)read-onlycurrent
f10BgpM2PeerMinASOrigInterval
OBJECT-TYPE
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
1.3.6.1.4.1.6027.20.1.2.3.2.1.4Unsigned32 (0..65535)read-onlycurrent
f10BgpM2PeerMinRouteAdverInterval
OBJECT-TYPE
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.6027.20.1.2.3.2.1.5Unsigned32 (0..65535)read-onlycurrent
f10BgpM2PeerNegotiatedTimersTable
OBJECT-TYPE
Current values of per-peer timers which can be dynamically set in the f10BgpM2PeerConfiguredTimersTable. Values reflected in this table are the current operational values, after negotiation from values derived from initial configuration or last set from f10BgpM2PeerConfiguredTimersTable row instances.
1.3.6.1.4.1.6027.20.1.2.3.3not-accessiblecurrent
f10BgpM2PeerNegotiatedTimersEntry
OBJECT-TYPE
Each entry reflects a value of the currently operational, negotiated timers as reflected in the F10BgpM2PeerNegotiatedTimersEntry.
1.3.6.1.4.1.6027.20.1.2.3.3.1not-accessiblecurrent
f10BgpM2PeerHoldTime
OBJECT-TYPE
The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages are sent and the Hold Timer is not set. At least three (3). This value is the smaller of the value sent by this peer in the OPEN message and f10BgpM2PeerHoldTimeConfigured for this peer. This value is only defined when the peering session is in the Established state.
1.3.6.1.4.1.6027.20.1.2.3.3.1.1Unsigned32 (0 | 3..65535)read-onlycurrent
f10BgpM2PeerKeepAlive
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with f10BgpM2PeerHoldTime, it has the same proportion as what f10BgpM2PeerKeepAliveConfigured has when compared with f10BgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of f10BgpM2PeerKeepAliveConfigured is zero (0). This value is only defined when the peering session is in the Established state.
1.3.6.1.4.1.6027.20.1.2.3.3.1.2Unsigned32 (0 | 1..21845)read-onlycurrent
f10BgpM2PeerCapabilities
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.4
f10BgpM2PeerCapsAnnouncedTable
OBJECT-TYPE
This table contains the capabilities that are supported for a given peer.
1.3.6.1.4.1.6027.20.1.2.4.1not-accessiblecurrent
f10BgpM2PeerCapsAnnouncedEntry
OBJECT-TYPE
These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code
1.3.6.1.4.1.6027.20.1.2.4.1.1not-accessiblecurrent
f10BgpM2PeerCapAnnouncedCode
OBJECT-TYPE
The BGP Capability Advertisement Capability Code.
1.3.6.1.4.1.6027.20.1.2.4.1.1.1Unsigned32 (0..255)read-onlycurrent
f10BgpM2PeerCapAnnouncedIndex
OBJECT-TYPE
Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.
1.3.6.1.4.1.6027.20.1.2.4.1.1.2Unsigned32 (1..128)read-onlycurrent
f10BgpM2PeerCapAnnouncedValue
OBJECT-TYPE
The value of the announced capability.
1.3.6.1.4.1.6027.20.1.2.4.1.1.3OCTET STRING (SIZE(0..255))read-onlycurrent
f10BgpM2PeerCapsReceivedTable
OBJECT-TYPE
This table contains the capabilities that are supported for a given peer.
1.3.6.1.4.1.6027.20.1.2.4.2not-accessiblecurrent
f10BgpM2PeerCapsReceivedEntry
OBJECT-TYPE
These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code
1.3.6.1.4.1.6027.20.1.2.4.2.1not-accessiblecurrent
f10BgpM2PeerCapReceivedCode
OBJECT-TYPE
The BGP Capability Advertisement Capability Code.
1.3.6.1.4.1.6027.20.1.2.4.2.1.1Unsigned32 (0..255)read-onlycurrent
f10BgpM2PeerCapReceivedIndex
OBJECT-TYPE
Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.
1.3.6.1.4.1.6027.20.1.2.4.2.1.2Unsigned32 (1..128)read-onlycurrent
f10BgpM2PeerCapReceivedValue
OBJECT-TYPE
The value of the announced capability.
1.3.6.1.4.1.6027.20.1.2.4.2.1.3OCTET STRING (SIZE(0..255))read-onlycurrent
f10BgpM2PeerCounters
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.6
f10BgpM2PeerCountersTable
OBJECT-TYPE
The counters associated with a BGP Peer.
1.3.6.1.4.1.6027.20.1.2.6.1not-accessiblecurrent
f10BgpM2PeerCountersEntry
OBJECT-TYPE
Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session.
1.3.6.1.4.1.6027.20.1.2.6.1.1not-accessiblecurrent
f10BgpM2PeerInUpdates
OBJECT-TYPE
The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.
1.3.6.1.4.1.6027.20.1.2.6.1.1.1Counter32read-onlycurrent
f10BgpM2PeerOutUpdates
OBJECT-TYPE
The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.
1.3.6.1.4.1.6027.20.1.2.6.1.1.2Counter32read-onlycurrent
f10BgpM2PeerInTotalMessages
OBJECT-TYPE
The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
1.3.6.1.4.1.6027.20.1.2.6.1.1.3Counter32read-onlycurrent
f10BgpM2PeerOutTotalMessages
OBJECT-TYPE
The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
1.3.6.1.4.1.6027.20.1.2.6.1.1.4Counter32read-onlycurrent
f10BgpM2PeerFsmEstablishedTrans
OBJECT-TYPE
The total number of times the BGP FSM transitioned into the established state for this peer.
1.3.6.1.4.1.6027.20.1.2.6.1.1.5Counter32read-onlycurrent
f10BgpM2PeerInKeepalives
OBJECT-TYPE
The number of Keepalive messages received from a peer.Implemented by Force10.
1.3.6.1.4.1.6027.20.1.2.6.1.1.6Counter32read-onlycurrent
f10BgpM2PeerOutKeepalives
OBJECT-TYPE
The number of Keepalive messages sent to a peer. Implemented by Force10.
1.3.6.1.4.1.6027.20.1.2.6.1.1.7Counter32read-onlycurrent
f10BgpM2PeerInOpen
OBJECT-TYPE
The number of Open messages received from a peer. Implemented by Force10.
1.3.6.1.4.1.6027.20.1.2.6.1.1.8Counter32read-onlycurrent
f10BgpM2PeerOutOpen
OBJECT-TYPE
The number of Open messages sent to a peer. Implemented by Force10.
1.3.6.1.4.1.6027.20.1.2.6.1.1.9Counter32read-onlycurrent
f10BgpM2PeerInRteRefresh
OBJECT-TYPE
The number of Route Refresh messages received from a peer. Implemented by Force10.
1.3.6.1.4.1.6027.20.1.2.6.1.1.10Counter32read-onlycurrent
f10BgpM2PeerOutRteRefresh
OBJECT-TYPE
The number of Route Refresh messages sent to a peer. Implemented by Force10.
1.3.6.1.4.1.6027.20.1.2.6.1.1.11Counter32read-onlycurrent
f10BgpM2PrefixCountersTable
OBJECT-TYPE
Additional per-peer, per AFI SAFI counters for prefixes
1.3.6.1.4.1.6027.20.1.2.6.2not-accessiblecurrent
f10BgpM2PrefixCountersEntry
OBJECT-TYPE
Entry containing information about a bgp-peers prefix counters.
1.3.6.1.4.1.6027.20.1.2.6.2.1not-accessiblecurrent
f10BgpM2PrefixCountersAfi
OBJECT-TYPE
The AFI index of the per-peer, per prefix counters
1.3.6.1.4.1.6027.20.1.2.6.2.1.1F10BgpM2Afiread-onlycurrent
f10BgpM2PrefixCountersSafi
OBJECT-TYPE
The SAFI index of the per-peer, per prefix counters
1.3.6.1.4.1.6027.20.1.2.6.2.1.2F10BgpM2Safiread-onlycurrent
f10BgpM2PrefixInPrefixes
OBJECT-TYPE
The number of prefixes received from a peer and are stored in the Adj-Ribs-In for that peer.
1.3.6.1.4.1.6027.20.1.2.6.2.1.7Gauge32read-onlycurrent
f10BgpM2PrefixInPrefixesAccepted
OBJECT-TYPE
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are eligible to become active in the Loc-Rib.
1.3.6.1.4.1.6027.20.1.2.6.2.1.8Gauge32read-onlycurrent
f10BgpM2PrefixInPrefixesRejected
OBJECT-TYPE
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are NOT eligible to become active in the Loc-Rib.
1.3.6.1.4.1.6027.20.1.2.6.2.1.9Gauge32read-onlycurrent
f10BgpM2PrefixOutPrefixes
OBJECT-TYPE
The number of prefixes for a peer that are installed in that peers Adj-Ribs-Out.
1.3.6.1.4.1.6027.20.1.2.6.2.1.10Gauge32read-onlycurrent
f10BgpM2PrefixWdrawnByPeer
OBJECT-TYPE
The number of prefixes withdrawn by a peer. Implemened by Force10.
1.3.6.1.4.1.6027.20.1.2.6.2.1.11Gauge32read-onlycurrent
f10BgpM2PrefixWdrawnFromPeer
OBJECT-TYPE
The number of prefixes withdrawn from a peer. Implemened by Force10.
1.3.6.1.4.1.6027.20.1.2.6.2.1.12Gauge32read-onlycurrent
f10BgpM2PeerExtensions
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.7
f10BgpM2PeerNonCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.7.1
f10BgpM2PeerRouteReflectionExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.7.1.2796
f10BgpM2PeerReflectorClientTable
OBJECT-TYPE
Table of route reflection client settings on a per-peer basis.
1.3.6.1.4.1.6027.20.1.2.7.1.2796.1not-accessiblecurrent
f10BgpM2PeerReflectorClientEntry
OBJECT-TYPE
Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client.
1.3.6.1.4.1.6027.20.1.2.7.1.2796.1.1not-accessiblecurrent
f10BgpM2PeerReflectorClient
OBJECT-TYPE
This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers.
1.3.6.1.4.1.6027.20.1.2.7.1.2796.1.1.1INTEGER {nonClient(0), client(1), meshedClient(2)}read-onlycurrent
f10BgpM2PeerASConfederationExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.7.1.3065
f10BgpM2PeerConfedMemberTable
OBJECT-TYPE
Table of confederation member settings on a per-peer basis.
1.3.6.1.4.1.6027.20.1.2.7.1.3065.1not-accessiblecurrent
f10BgpM2PeerConfedMemberEntry
OBJECT-TYPE
Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member.
1.3.6.1.4.1.6027.20.1.2.7.1.3065.1.1not-accessiblecurrent
f10BgpM2PeerConfedMember
OBJECT-TYPE
This value indicates whether the given peer is in our confederation or not.
1.3.6.1.4.1.6027.20.1.2.7.1.3065.1.1.1TruthValueread-onlycurrent
f10BgpM2PeerCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.7.2
f10BgpM2PeerConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.8
f10BgpM2CfgPeerAdminStatusTable
OBJECT-TYPE
Table containing rows for administratively starting and stopping peering sessions.
1.3.6.1.4.1.6027.20.1.2.8.1not-accessiblecurrent
f10BgpM2CfgPeerAdminStatusEntry
OBJECT-TYPE
Entry containing row for administratively starting and stopping peers.
1.3.6.1.4.1.6027.20.1.2.8.1.1not-accessiblecurrent
f10BgpM2CfgPeerAdminStatus
OBJECT-TYPE
This object allows the Manual Stop and Manual Start events to be sent to an activated peering session.
1.3.6.1.4.1.6027.20.1.2.8.1.1.1INTEGER {stop(1), start(2)}read-writecurrent
f10BgpM2CfgPeerNextIndex
OBJECT-TYPE
This object contains the next appropriate value to use as an index for creation of a row instance in in the f10BgpM2CfgPeerTable. If the number of available entries in the f10BgpM2CfgPeerTable is exhausted, a retrieval value of this object instance will return 0. A value of 0 may also be returned if the agent is otherwise incapable of f10BgpM2CfgPeerTable row creation at the time of f10BgpM2CfgPeerNextIndex retrieval.
1.3.6.1.4.1.6027.20.1.2.8.2Integer32 (0..65535)read-onlycurrent
f10BgpM2CfgPeerTable
OBJECT-TYPE
BGP configuration peer table. This table allows the configuration of the parameters for a session with a BGP peer. +++wayne provide description of how config should be done for a peer per table.
1.3.6.1.4.1.6027.20.1.2.8.3not-accessiblecurrent
f10BgpM2CfgPeerEntry
OBJECT-TYPE
Entry containing information set up by a management entity to configure a connection with a BGP peer.
1.3.6.1.4.1.6027.20.1.2.8.3.1not-accessiblecurrent
f10BgpM2CfgPeerConfiguredVersion
OBJECT-TYPE
The configured version to originally start with this peer. The BGP speaker may permit negotiation to a lower version number of the protocol depending on the set value of f10BgpM2CfgAllowVersionNegotiation.
1.3.6.1.4.1.6027.20.1.2.8.3.1.1Unsigned32 (1..255)read-createcurrent
f10BgpM2CfgAllowVersionNegotiation
OBJECT-TYPE
If set to true, during session establishment with this peer, negotiation to a version lower than that specified in f10BgpM2CfgPeerConfiguredVersion will be allowed.
1.3.6.1.4.1.6027.20.1.2.8.3.1.2TruthValueread-createcurrent
f10BgpM2CfgPeerLocalAddrType
OBJECT-TYPE
The address family of the speakers of this BGP session.
1.3.6.1.4.1.6027.20.1.2.8.3.1.3InetAddressTyperead-createcurrent
f10BgpM2CfgPeerLocalAddr
OBJECT-TYPE
The address of the local end of the peering session.
1.3.6.1.4.1.6027.20.1.2.8.3.1.4InetAddress (SIZE(4..20))read-createcurrent
f10BgpM2CfgPeerLocalAs
OBJECT-TYPE
Autonomous system represented to peer on peering session initialization. Some implementations of BGP can represent themselves as multiple ASes. These implementations can set this to an alternate autonomous system. If this object is set to zero (0) at the point this row instance is set to active, then the implementation will initialize this session representing itself as the value of f10BgpM2CfgLocalAs.
1.3.6.1.4.1.6027.20.1.2.8.3.1.5InetAutonomousSystemNumberread-createcurrent
f10BgpM2CfgPeerRemoteAddrType
OBJECT-TYPE
The address family of the speakers of the remote BGP session.
1.3.6.1.4.1.6027.20.1.2.8.3.1.6InetAddressTyperead-createcurrent
f10BgpM2CfgPeerRemoteAddr
OBJECT-TYPE
The address of the remote end (destination address of peer) for peering session.
1.3.6.1.4.1.6027.20.1.2.8.3.1.7InetAddress (SIZE(4..20))read-createcurrent
f10BgpM2CfgPeerRemoteAs
OBJECT-TYPE
Autonomous system number of the remote peer.
1.3.6.1.4.1.6027.20.1.2.8.3.1.8InetAutonomousSystemNumberread-createcurrent
f10BgpM2CfgPeerEntryStorageType
OBJECT-TYPE
This object type specifies the intended storage type for the f10BgpM2CfgPeerEntry row instance.
1.3.6.1.4.1.6027.20.1.2.8.3.1.9StorageTyperead-createcurrent
f10BgpM2CfgPeerError
OBJECT-TYPE
This value indicates the current error status of the row denoting the configured error status. If this row is still under creation (has not been activated f10BgpM2CfgPeerRowEntryStatus), then this instance will be set to not-activated (1). At the point that the row is activated, f10BgpM2CfgPeerError will reflect the error status of the row data itself. If there is another session already activated with the same local and remote addresses as denoted by {f10BgpM2CfgPeerLocalAddrType, f10BgpM2CfgPeerLocalAddr, f10BgpM2CfgPeerRemoteAddr}, then the value of this will be set to err-duplicate-peering-session (2). If this row is associated with a peer session whose initialization has been attempted, the value will be set to activated (3) (and, f10BgpM2PeerCfgPeerEntry will be set to the row instance of the entry in the f10BgpM2PeerTable which reflects the state of the peering session). Note that this object only reflects the error as a function of the attempted activation of this row as containing data for a bgp peering session. The actual state of the session at the point of any protocol exchange or session state machine initiation is reflected in the f10BgpM2PeerTable row instance (as reflected through f10BgpM2CfgPeerPeerEntry) associated with this row instance.
1.3.6.1.4.1.6027.20.1.2.8.3.1.10INTEGER {unknown(0), notActivated(1), errDuplicatePeeringSession(2), activated(3)}read-onlycurrent
f10BgpM2CfgPeerBgpPeerEntry
OBJECT-TYPE
Upon activation of the session data contained in this row instance, this object points to an instance of a row within the f10BgpM2PeerTable reflecting the session in its initializing or operational state. Retrieval of this column instance will always yield a value of {0.0} unless the session has successfully been activated (via f10BgpM2CfgPeerRowEntryStatus). Such row instances will always have a value of f10BgpM2CfgPeerError which is activated (3).
1.3.6.1.4.1.6027.20.1.2.8.3.1.11RowPointerread-onlycurrent
f10BgpM2CfgPeerRowEntryStatus
OBJECT-TYPE
This object type is used to control creation, activation, and deletion of this row instance.
1.3.6.1.4.1.6027.20.1.2.8.3.1.12RowStatusread-createcurrent
f10BgpM2CfgPeerIndex
OBJECT-TYPE
Uniquely identifies an instance of a peer row, as an element of configuration.
1.3.6.1.4.1.6027.20.1.2.8.3.1.13Integer32 (1..65535)accessible-for-notifycurrent
f10BgpM2CfgPeerStatus
OBJECT-TYPE
This specifies the state of the peering session upon activation. If disabled, the FSM is in the halted state and no Automatic Start events are generated. If enabled, the FSM is in the running state and Automatic Start events may be generated.
1.3.6.1.4.1.6027.20.1.2.8.3.1.14INTEGER {halted(1), running(2)}read-createcurrent
f10BgpM2CfgPeerTimersTable
OBJECT-TYPE
Table for configuration of per-peer timers.
1.3.6.1.4.1.6027.20.1.2.8.4not-accessiblecurrent
f10BgpM2CfgPeerTimersEntry
OBJECT-TYPE
Entry containing per-peer timer configuration.
1.3.6.1.4.1.6027.20.1.2.8.4.1not-accessiblecurrent
f10BgpM2CfgPeerConnectRetryInterval
OBJECT-TYPE
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
1.3.6.1.4.1.6027.20.1.2.8.4.1.1Unsigned32 (1..65535)read-createcurrent
f10BgpM2CfgPeerHoldTimeConfigured
OBJECT-TYPE
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (f10BgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
1.3.6.1.4.1.6027.20.1.2.8.4.1.2Unsigned32 (0 | 3..65535)read-createcurrent
f10BgpM2CfgPeerKeepAliveConfigured
OBJECT-TYPE
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in f10BgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by f10BgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of f10BgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.6027.20.1.2.8.4.1.3Unsigned32 (0 | 1..21845)read-createcurrent
f10BgpM2CfgPeerMinASOrigInterval
OBJECT-TYPE
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
1.3.6.1.4.1.6027.20.1.2.8.4.1.4Unsigned32 (0..65535)read-createcurrent
f10BgpM2CfgPeerMinRouteAdverInter
OBJECT-TYPE
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
1.3.6.1.4.1.6027.20.1.2.8.4.1.5Unsigned32 (0..65535)read-createcurrent
f10BgpM2CfgPeerExtensions
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.8.5
f10BgpM2CfgPeerNonCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.8.5.1
f10BgpM2CfgPeerRouteReflectionExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.8.5.1.2796
f10BgpM2CfgPeerReflectorClientTable
OBJECT-TYPE
Table of route reflection client settings on a per-peer basis.
1.3.6.1.4.1.6027.20.1.2.8.5.1.2796.1not-accessiblecurrent
f10BgpM2CfgPeerReflectorClientEntry
OBJECT-TYPE
Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client.
1.3.6.1.4.1.6027.20.1.2.8.5.1.2796.1.1not-accessiblecurrent
f10BgpM2CfgPeerReflectorClient
OBJECT-TYPE
This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers.
1.3.6.1.4.1.6027.20.1.2.8.5.1.2796.1.1.1INTEGER {nonClient(0), client(1), meshedClient(2)}read-createcurrent
f10BgpM2CfgPeerASConfederationExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.8.5.1.3065
f10BgpM2CfgPeerConfedMemberTable
OBJECT-TYPE
Table of confederation member settings on a per-peer basis.
1.3.6.1.4.1.6027.20.1.2.8.5.1.3065.1not-accessiblecurrent
f10BgpM2CfgPeerConfedMemberEntry
OBJECT-TYPE
Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member.
1.3.6.1.4.1.6027.20.1.2.8.5.1.3065.1.1not-accessiblecurrent
f10BgpM2CfgPeerConfedMember
OBJECT-TYPE
This value indicates whether the given peer is in our confederation or not.
1.3.6.1.4.1.6027.20.1.2.8.5.1.3065.1.1.1TruthValueread-createcurrent
f10BgpM2CfgPeerCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.2.8.5.2
f10BgpM2Rib
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.3
f10BgpM2NlriTable
OBJECT-TYPE
The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents the Adj-Ribs-In. The route where f10BgpM2NlriBest is TRUE represents, for this NLRI, the route that is installed in the LocRib from the Adj-Ribs-In.
1.3.6.1.4.1.6027.20.1.3.1not-accessiblecurrent
f10BgpM2NlriEntry
OBJECT-TYPE
Information about a path to a network.
1.3.6.1.4.1.6027.20.1.3.1.1not-accessiblecurrent
f10BgpM2NlriIndex
OBJECT-TYPE
This index allows for multiple instances of a base prefix for a certain AFI SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single route instance. 2. Allow for extensions which extend the NLRI field to send the same prefix while utilizing other extension specific information. An example of this is RFC 3107 - Carrying MPLS labels in BGP.
1.3.6.1.4.1.6027.20.1.3.1.1.1Unsigned32read-onlycurrent
f10BgpM2NlriAfi
OBJECT-TYPE
The address family of the prefix for this NLRI.
1.3.6.1.4.1.6027.20.1.3.1.1.2F10BgpM2Afiread-onlycurrent
f10BgpM2NlriSafi
OBJECT-TYPE
The subsequent address family of the prefix for this NLRI
1.3.6.1.4.1.6027.20.1.3.1.1.3F10BgpM2Safiread-onlycurrent
f10BgpM2NlriPrefixType
OBJECT-TYPE
The type of the IP address prefix in the Network Layer Reachability Information field. The value of this object is derived from the appropriate value from the f10BgpM2NlriAfi field. Where an appropriate InetAddressType is not available, the value of the object must be unknown(0). XXX TODO - This seems like a hack.
1.3.6.1.4.1.6027.20.1.3.1.1.4InetAddressTyperead-onlycurrent
f10BgpM2NlriPrefix
OBJECT-TYPE
An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by f10BgpM2PathAttrAddrPrefixLen. Any bits beyond the length specified by f10BgpM2PathAttrAddrPrefixLen are zeroed.
1.3.6.1.4.1.6027.20.1.3.1.1.5InetAddress (SIZE(4..20))read-onlycurrent
f10BgpM2NlriPrefixLen
OBJECT-TYPE
Length in bits of the address prefix in the Network Layer Reachability Information field.
1.3.6.1.4.1.6027.20.1.3.1.1.6InetAddressPrefixLengthread-onlycurrent
f10BgpM2NlriBest
OBJECT-TYPE
An indication of whether or not this route was chosen as the best BGP4 route.
1.3.6.1.4.1.6027.20.1.3.1.1.7TruthValueread-onlycurrent
f10BgpM2NlriCalcLocalPref
OBJECT-TYPE
The degree of preference calculated by the receiving BGP4 speaker for an advertised route.
1.3.6.1.4.1.6027.20.1.3.1.1.8Unsigned32read-onlycurrent
f10BgpM2PathAttrIndex
OBJECT-TYPE
This value is a unique index for the per-NLRI entry in the f10BgpM2PathAttrTable. It is assigned by the agent at the point of creation of the f10BgpM2PathAttrTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2PathAttrIndex row instance values across rows of the f10BgpM2PeerAttrTable. It is used to provide an index structure for other tables whose data is logically per-peer, per-NLRI.
1.3.6.1.4.1.6027.20.1.3.1.1.9Unsigned32read-onlycurrent
f10BgpM2NlriOpaqueType
OBJECT-TYPE
This object enumerates the type of the row that is pointed to in the table row f10BgpM2NlriOpaquePointer instance, if f10BgpM2NlriOpaquePointer is in fact not a zero length. f10BgpM2NlriOpaqueType is necessary since the data referenced by f10BgpM2NlriOpaquePointer is opaque to BGP. For example, in the case of RFC 3107, the label stack that is pointed to may occur in the mplsLabelStackTable from the MPLS-LSR-MIB, and the instance value of f10BgpM2NlriOpaqueType would be bgpMplsLabelStack(1).
1.3.6.1.4.1.6027.20.1.3.1.1.10INTEGER {none(0), bgpMplsLabelStack(1)}read-onlycurrent
f10BgpM2NlriOpaquePointer
OBJECT-TYPE
Pointer to a row that decomposes the data that is opaque to the BGP MIB but is sent in the NLRI. This RowPointer has zero (0) length data instance if f10BgpM2NlriOpaqueType is none.
1.3.6.1.4.1.6027.20.1.3.1.1.11RowPointerread-onlycurrent
f10BgpM2AdjRibsOutTable
OBJECT-TYPE
This table contains on a per-peer basis one or more routes from the f10BgpM2NlriTable that have been placed in this peer's Adj-Ribs-Out.
1.3.6.1.4.1.6027.20.1.3.2not-accessiblecurrent
f10BgpM2AdjRibsOutEntry
OBJECT-TYPE
List of BGP routes that have been placed into a peer's Adj-Ribs-Out.
1.3.6.1.4.1.6027.20.1.3.2.1not-accessiblecurrent
f10BgpM2AdjRibsOutIndex
OBJECT-TYPE
Certain extensions to BGP permit multiple instance of a per afi, per safi prefix to be advertised to a peer. This object allows the enumeration of them.
1.3.6.1.4.1.6027.20.1.3.2.1.1Unsigned32read-onlycurrent
f10BgpM2AdjRibsOutRoute
OBJECT-TYPE
This object points to the route in the f10BgpM2NlriTable that corresponds to the entry in the peer's Adj-Rib-Out. Outgoing route maps are not reflected at this point as those are part of the Update-Send process.
1.3.6.1.4.1.6027.20.1.3.2.1.2RowPointerread-onlycurrent
f10BgpM2PathAttrCount
OBJECT-TYPE
The number of entries in the f10BgpM2PathAttrTable.
1.3.6.1.4.1.6027.20.1.3.3Counter32read-onlycurrent
f10BgpM2PathAttrTable
OBJECT-TYPE
Provides per advertised network-prefix attribute data, as advertised over a peering session.
1.3.6.1.4.1.6027.20.1.3.4not-accessiblecurrent
f10BgpM2PathAttrEntry
OBJECT-TYPE
Each entry contains data about a given network prefix, per-prefix and per-advertising peer.
1.3.6.1.4.1.6027.20.1.3.4.1not-accessiblecurrent
f10BgpM2PathAttrOrigin
OBJECT-TYPE
The ultimate origin of the path information.
1.3.6.1.4.1.6027.20.1.3.4.1.1INTEGER {igp(1), egp(2), incomplete(3)}read-onlycurrent
f10BgpM2PathAttrNextHopAddrType
OBJECT-TYPE
The address family of the address for the border router that should be used to access the destination network.
1.3.6.1.4.1.6027.20.1.3.4.1.2InetAddressTyperead-onlycurrent
f10BgpM2PathAttrNextHop
OBJECT-TYPE
The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of the prefix in this row. Note that for RFC2545 style double nexthops, this object will always contain the global scope nexthop. f10BgpM2LinkLocalNextHopTable will contain the linklocal scope nexthop. In the case that the mechanism documented in draft-kato-bgp-ipv6-link-local-00.txt is used and only a link local nexthop has been sent, , f10BgpM2LinkLocalNextHopPresent will be false and f10BgpM2PathAttrNextHop will contain the link local nexthop.
1.3.6.1.4.1.6027.20.1.3.4.1.3InetAddress (SIZE(4..20))read-onlycurrent
f10BgpM2PathAttrMedPresent
OBJECT-TYPE
Whether or not the MED value is present. If it is not present, the f10BgpM2PathAttrMed object has no useful value and should be set to 0.
1.3.6.1.4.1.6027.20.1.3.4.1.4TruthValueread-onlycurrent
f10BgpM2PathAttrMed
OBJECT-TYPE
This metric is used to discriminate between multiple exit points to an adjacent autonomous system.
1.3.6.1.4.1.6027.20.1.3.4.1.5Unsigned32read-onlycurrent
f10BgpM2PathAttrLocalPrefPresent
OBJECT-TYPE
Whether or not the LocalPref value is present. If it is not present, the f10BgpM2PathAttrLocalPref object has no useful value and should be set to 0.
1.3.6.1.4.1.6027.20.1.3.4.1.6TruthValueread-onlycurrent
f10BgpM2PathAttrLocalPref
OBJECT-TYPE
The originating BGP4 speakers degree of preference for an advertised route.
1.3.6.1.4.1.6027.20.1.3.4.1.7Unsigned32read-onlycurrent
f10BgpM2PathAttrAtomicAggregate
OBJECT-TYPE
When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific.
1.3.6.1.4.1.6027.20.1.3.4.1.8INTEGER {atomicAggregatePresent(1), atomicAggregateMissing(2)}read-onlycurrent
f10BgpM2PathAttrAggregatorAS
OBJECT-TYPE
The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.
1.3.6.1.4.1.6027.20.1.3.4.1.9InetAutonomousSystemNumberread-onlycurrent
f10BgpM2PathAttrAggregatorAddr
OBJECT-TYPE
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
1.3.6.1.4.1.6027.20.1.3.4.1.10F10BgpM2Identifierread-onlycurrent
f10BgpM2AsPathCalcLength
OBJECT-TYPE
This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection.
1.3.6.1.4.1.6027.20.1.3.4.1.11Unsigned32read-onlycurrent
f10BgpM2AsPathString
OBJECT-TYPE
This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability.
1.3.6.1.4.1.6027.20.1.3.4.1.12SnmpAdminStringread-onlycurrent
f10BgpM2AsPathIndex
OBJECT-TYPE
This value is a unique index for the decomposed AS Path in the f10BgpM2AsPathTable. It is assigned by the agent at the point of creation of the f10BgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2AsPathIndex row instance values across rows of the f10BgpM2AsPathTable.
1.3.6.1.4.1.6027.20.1.3.4.1.13Unsigned32read-onlycurrent
f10BgpM2AsPath4byteTable
OBJECT-TYPE
This table is present for BGP speakers that support the AS 4byte specification and are functioning as a router between 2-byte and 4-byte AS space.
1.3.6.1.4.1.6027.20.1.3.5not-accessiblecurrent
f10BgpM2AsPath4byteEntry
OBJECT-TYPE
Each row contains the information for the AS 4-byte extension's NEW_AS_PATH and NEW_AGGREGATOR attributes.
1.3.6.1.4.1.6027.20.1.3.5.1not-accessiblecurrent
f10BgpM2AsPath4bytePathPresent
OBJECT-TYPE
This value may only be true if this BGP Speaker is functioning as a router between ASs that are in 2-byte and 4-byte AS space. If this value is true, then the NEW_AS_PATH attributes are present and the 4-byte versions of the appropriate path attributes are in this row. If this value is false, then the following values will be present in the row: f10BgpM2PathAttrAggregatorAS - zero (0). f10BgpM2AsPathCalcLength - zero (0). f10BgpM2AsPathString - zero (0) length string. f10BgpM2AsPathIndex - zero (0).
1.3.6.1.4.1.6027.20.1.3.5.1.1TruthValueread-onlycurrent
f10BgpM2AsPath4byteAggregatorAS
OBJECT-TYPE
The NEW_AGGREGATOR AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.
1.3.6.1.4.1.6027.20.1.3.5.1.2InetAutonomousSystemNumberread-onlycurrent
f10BgpM2AsPath4byteCalcLength
OBJECT-TYPE
This value represents the calculated length of the NEW_AS_PATH according to the rules of the BGP specification. This value is used in route selection.
1.3.6.1.4.1.6027.20.1.3.5.1.3Unsigned32read-onlycurrent
f10BgpM2AsPath4byteString
OBJECT-TYPE
This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability.
1.3.6.1.4.1.6027.20.1.3.5.1.4SnmpAdminStringread-onlycurrent
f10BgpM2AsPath4byteIndex
OBJECT-TYPE
This value is a unique index for the decomposed AS Path in the f10BgpM2AsPathTable. It is assigned by the agent at the point of creation of the f10BgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of f10BgpM2AsPathIndex row instance values across rows of the f10BgpM2AsPathTable.
1.3.6.1.4.1.6027.20.1.3.5.1.5Unsigned32read-onlycurrent
f10BgpM2AsPathTable
OBJECT-TYPE
The BGP-4 Path Attribute AS Path Table contains the per network path (NLRI) AS PATH data received from the advertising BGP peer.
1.3.6.1.4.1.6027.20.1.3.6not-accessiblecurrent
f10BgpM2AsPathTableEntry
OBJECT-TYPE
Information about an AS path provided with a path to a network.
1.3.6.1.4.1.6027.20.1.3.6.1not-accessiblecurrent
f10BgpM2AsPathSegmentIndex
OBJECT-TYPE
A per-AS path segment index. This will index a set of autonomous systems in an AS path which are part of the same sequence or set (as determined by the row value of f10BgpM2AsPathType, which should be the same value for each f10BgpM2AsPathTable entry indexed by the same (f10BgpM2PathAttrIndex, f10BgpM2AsPathIndex) pair).
1.3.6.1.4.1.6027.20.1.3.6.1.1Unsigned32read-onlycurrent
f10BgpM2AsPathElementIndex
OBJECT-TYPE
A per-AS element index. This will index a particular AS within a sequence or set of autonomous systems in an AS path.
1.3.6.1.4.1.6027.20.1.3.6.1.2Unsigned32read-onlycurrent
f10BgpM2AsPathType
OBJECT-TYPE
The type of sequence in which this asPath was advertised as an attribute. Note that all asPath row instances for a given (f10BgpM2PathAttrIndex, f10BgpM2AsPathIndex) index pair will have their f10BgpM2AsPathType set to the same value. The values for f10BgpM2AsPathType are interpreted as defined in the base BGP document and the BGP AS Confederations document.
1.3.6.1.4.1.6027.20.1.3.6.1.3INTEGER {asSet(1), asSequence(2), confedSequence(3), confedSet(4)}read-onlycurrent
f10BgpM2AsPathElementValue
OBJECT-TYPE
An AS value for an AS the related NLRI traversed in the propagation of its advertisement. This value is to be interpreted in the context of the sequence implied by f10BgpM2AsPathIndex and f10BgpM2AsPathType (and, in sequence of the other table rows with the same value of f10BgpM2PathAttrIndex and f10BgpM2AsPathIndex).
1.3.6.1.4.1.6027.20.1.3.6.1.4InetAutonomousSystemNumberread-onlycurrent
f10BgpM2PathAttrUnknownTable
OBJECT-TYPE
The BGP-4 Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the local BGP implementation or not otherwise capable of being returned from this agent. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of such unknown attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable).
1.3.6.1.4.1.6027.20.1.3.7not-accessiblecurrent
f10BgpM2PathAttrUnknownEntry
OBJECT-TYPE
Information about an unknown attribute provided with a path to a network.
1.3.6.1.4.1.6027.20.1.3.7.1not-accessiblecurrent
f10BgpM2PathAttrUnknownIndex
OBJECT-TYPE
An integer index for a row in this table.
1.3.6.1.4.1.6027.20.1.3.7.1.1Unsigned32read-onlycurrent
f10BgpM2PathAttrUnknownType
OBJECT-TYPE
The attribute type advertised with this unknown attribute by the peer.
1.3.6.1.4.1.6027.20.1.3.7.1.2Unsigned32read-onlycurrent
f10BgpM2PathAttrUnknownValue
OBJECT-TYPE
Value of path attribute not understood by the base BGP-4 document. Octets beyond the maximum size, if any, are not recorded by this row object.
1.3.6.1.4.1.6027.20.1.3.7.1.3OCTET STRING (SIZE(0..4070))read-onlycurrent
f10BgpM2PathAttrExtensions
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.3.8
f10BgpM2PathAttrNonCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.3.8.1
f10BgpM2PathAttrCommunityExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.3.8.1.1997
f10BgpM2PathAttrCommTable
OBJECT-TYPE
The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable).
1.3.6.1.4.1.6027.20.1.3.8.1.1997.1not-accessiblecurrent
f10BgpM2PathAttrCommEntry
OBJECT-TYPE
Information about a community association provided with a path to a network.
1.3.6.1.4.1.6027.20.1.3.8.1.1997.1.1not-accessiblecurrent
f10BgpM2PathAttrCommIndex
OBJECT-TYPE
An integer index for a row in this table.
1.3.6.1.4.1.6027.20.1.3.8.1.1997.1.1.1Unsigned32read-onlycurrent
f10BgpM2PathAttrCommValue
OBJECT-TYPE
A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics.
1.3.6.1.4.1.6027.20.1.3.8.1.1997.1.1.2F10BgpM2Communityread-onlycurrent
f10BgpM2LinkLocalNextHopTable
OBJECT-TYPE
Table of link local nexthops as sent by RFC 2545 for IPv6 BGP Speakers.
1.3.6.1.4.1.6027.20.1.3.8.1.2545not-accessiblecurrent
f10BgpM2LinkLocalNextHopEntry
OBJECT-TYPE
Entry containing the link-local nexthops as sent by a BGP speaker running RFC 2545 extensions for double-nexthops.
1.3.6.1.4.1.6027.20.1.3.8.1.2545.1not-accessiblecurrent
f10BgpM2LinkLocalNextHopPresent
OBJECT-TYPE
This value is TRUE if and only if the BGP speaker is receiving IPv6 NLRI using the RFC 2545 double nexthop convention and it has received a link local scope nexthop in addition to the global scope nexthop.
1.3.6.1.4.1.6027.20.1.3.8.1.2545.1.1TruthValueread-onlycurrent
f10BgpM2LinkLocalNextHop
OBJECT-TYPE
This value contains an IPv6 link local address of InetAddressType of type ipv6z. This value is only present if f10BgpM2LinkLocalNextHopPresent is true.
1.3.6.1.4.1.6027.20.1.3.8.1.2545.1.2InetAddress (SIZE(20))read-onlycurrent
f10BgpM2PathAttrRouteReflectionExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.3.8.1.2796
f10BgpM2PathAttrOriginatorIdTable
OBJECT-TYPE
Per prefix data pertinent to advertisement of a network prefix through an originator.
1.3.6.1.4.1.6027.20.1.3.8.1.2796.1not-accessiblecurrent
f10BgpM2PathAttrOriginatorIdEntry
OBJECT-TYPE
Each entry contains data pertinent to a network prefix as received through its originating BGP route reflector.
1.3.6.1.4.1.6027.20.1.3.8.1.2796.1.1not-accessiblecurrent
f10BgpM2PathAttrOriginatorId
OBJECT-TYPE
The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute.
1.3.6.1.4.1.6027.20.1.3.8.1.2796.1.1.1F10BgpM2Identifierread-onlycurrent
f10BgpM2PathAttrClusterTable
OBJECT-TYPE
The BGP-4 Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable).
1.3.6.1.4.1.6027.20.1.3.8.1.2796.2not-accessiblecurrent
f10BgpM2PathAttrClusterEntry
OBJECT-TYPE
Information about a cluster traversal provided with a path to a network.
1.3.6.1.4.1.6027.20.1.3.8.1.2796.2.1not-accessiblecurrent
f10BgpM2PathAttrClusterIndex
OBJECT-TYPE
An integral index for a row in this table.
1.3.6.1.4.1.6027.20.1.3.8.1.2796.2.1.1Unsigned32read-onlycurrent
f10BgpM2PathAttrClusterValue
OBJECT-TYPE
A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster that the route has traversed. The sequence of this path as received in the route advertisement will be preserved in the sequence of f10BgpM2PathAttrClusterTable rows (and the f10BgpM2PathAttrClusterValues in each row) as returned for a given f10BgpM2PathAttrIndex value, and the monotonically increasing sequence of f10BgpM2PathAttrClusterIndex values for that f10BgpM2PathAttrIndex.
1.3.6.1.4.1.6027.20.1.3.8.1.2796.2.1.2F10BgpM2Identifierread-onlycurrent
f10BgpM2PathAttrExtCommTable
OBJECT-TYPE
The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the extended community membership advertised with a route. The absence of row data for a given index value for f10BgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that f10BgpM2PathAttrIndex value in the f10BgpM2PathAttrTable). XXX JMH - can not assign the OID until an RFC is published.
1.3.6.1.4.1.6027.20.1.3.8.1.3501not-accessiblecurrent
f10BgpM2PathAttrExtCommEntry
OBJECT-TYPE
Information about an extended community association provided with a path to a network.
1.3.6.1.4.1.6027.20.1.3.8.1.3501.1not-accessiblecurrent
f10BgpM2PathAttrExtCommIndex
OBJECT-TYPE
An integral index for a row in this table.
1.3.6.1.4.1.6027.20.1.3.8.1.3501.1.1Unsigned32read-onlycurrent
f10BgpM2PathAttrExtCommValue
OBJECT-TYPE
A value representing an extended community which was received with the route implied by the f10BgpM2PathAttr Index value of this row data. There are certain 8-octet long values which could be returned in this columnar row data that carry additional semantics.
1.3.6.1.4.1.6027.20.1.3.8.1.3501.1.2F10BgpM2ExtendedCommunityread-onlycurrent
f10BgpM2PathAttrCapExts
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.3.8.2
f10BgpM2Conformance
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.4
f10BgpM2MIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.4.1
f10BgpM2MIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6027.20.1.4.2

Notifications

NameOIDStatus
f10BgpM2Established
NOTIFICATION-TYPE
The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.
1.3.6.1.4.1.6027.20.1.1.0.1current
f10BgpM2BackwardTransition
NOTIFICATION-TYPE
The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.
1.3.6.1.4.1.6027.20.1.1.0.2current

Conformance

NameOIDStatus
f10BgpM2MIBCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the BGP4 mib.
1.3.6.1.4.1.6027.20.1.4.1.1current
f10BgpM2CommunitiesGroup
OBJECT-GROUP
Objects associated with BGP communities.
1.3.6.1.4.1.6027.20.1.4.2.1current
f10BgpM2ExtCommunitiesGroup
OBJECT-GROUP
Objects associated with BGP extended communities.
1.3.6.1.4.1.6027.20.1.4.2.2current
f10BgpM2RouteReflectionGroup
OBJECT-GROUP
Objects associated with BGP route reflection.
1.3.6.1.4.1.6027.20.1.4.2.3current
f10BgpM2AsConfederationGroup
OBJECT-GROUP
Objects associated with BGP confederation membership.
1.3.6.1.4.1.6027.20.1.4.2.4current
f10BgpM2TimersGroup
OBJECT-GROUP
Objects associated with BGP peering timers.
1.3.6.1.4.1.6027.20.1.4.2.5current
f10BgpM2CountersGroup
OBJECT-GROUP
Objects to count discrete events and exchanges on BGP sessions.
1.3.6.1.4.1.6027.20.1.4.2.6current
f10BgpM2CapabilitiesGroup
OBJECT-GROUP
Objects to report capabilities as received on BGP sessions.
1.3.6.1.4.1.6027.20.1.4.2.7current
f10BgpM2AsPathGroup
OBJECT-GROUP
Objects to report AS paths received on BGP NLRIs.
1.3.6.1.4.1.6027.20.1.4.2.8current
f10BgpM2As4byteGroup
OBJECT-GROUP
AS Size objects.
1.3.6.1.4.1.6027.20.1.4.2.9current
f10BgpM2BaseGroup
OBJECT-GROUP
Basic objects in local BGP implementation.
1.3.6.1.4.1.6027.20.1.4.2.10current
f10BgpM2ErrorsGroup
OBJECT-GROUP
Errors received on BGP peering sessions.
1.3.6.1.4.1.6027.20.1.4.2.11current
f10BgpM2PeerGroup
OBJECT-GROUP
Core object types on BGP peering sessions.
1.3.6.1.4.1.6027.20.1.4.2.12current
f10BgpM2PathAttributesGroup
OBJECT-GROUP
Attributes received on BGP peering sessions.
1.3.6.1.4.1.6027.20.1.4.2.13current
f10BgpM2PeerConfigurationGroup
OBJECT-GROUP
Configuration objects for BGP peers.
1.3.6.1.4.1.6027.20.1.4.2.14current
f10BgpM2PeerRouteReflectorCfgGroup
OBJECT-GROUP
Configuration objects for BGP peers that support route reflection.
1.3.6.1.4.1.6027.20.1.4.2.15current
f10BgpM2PeerAsConfederationCfgGroup
OBJECT-GROUP
Configuration objects for BGP peers that support BGP confederations.
1.3.6.1.4.1.6027.20.1.4.2.16current
f10BgpM2MIBNotificationsGroup
NOTIFICATION-GROUP
This group contains objects for notifications supported by this mib module.
1.3.6.1.4.1.6027.20.1.4.2.17current
f10BgpM2Rfc2545Group
OBJECT-GROUP
This group is required for peers that support exchanging of IPv6 NLRI per RFC 2545.
1.3.6.1.4.1.6027.20.1.4.2.18current