MIBs Depot

FLEXDSR04

Registered at
1.3.6.1.4.1.21529.3.2.4
Last updated
2019-11-11 13:00
Organization
2wcom Systems GmbH
Revisions
2019-11-11 13:00, 2017-01-30 10:00, 2016-11-01 16:00, 2016-09-26 15:00, 2014-06-25 17:00, 2014-05-16 12:00, 2014-03-06 16:00, 2014-02-13 09:00, 2012-10-26 12:00
Namespace
2wcom
Source file
FLEXDSR04
Digest
sha256:915cdf0f2c9a2e019835253acb86a1a018d262c28dc7222a8987d0bd3698b61c

Description

FlexDSR04+ MIB

Contact

2wcom Systems GmbH c/o Ralf Magnussen Am Sophienhof 8 24941 Flensburg Tel: +49 461 662830-37 Fax: +49 461 662830-11 WEB: www.2wcom.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-MIBsysContact, sysDescr, sysLocation, sysName
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue
TWOWCOM-COMMONVARBINDSFaultOK, FloatString, Integer32d1, Integer32d2, commonGroup, commonVarbindsCompliance, eventCounter, eventPriority, eventTimeStamp, mibRelease
TWOWCOM-SMIdecoder, dvbDecoder, dvbEncoder, encoder, other

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

FLEXDSR04
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TWOWCOM-COMMONVARBINDS
TWOWCOM-SMI

Textual conventions

NameOIDSyntaxAccessStatus
InputSource
TEXTUAL-CONVENTION
Input source type
current
ServiceMode
TEXTUAL-CONVENTION
Description.
current

Objects

NameOIDSyntaxAccessStatus
flexDSR04Events
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.0
inputSourceSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1
audioOutput1Table
OBJECT-TYPE
Defining the main source and the (up to) three backup sources for the audio output 1
1.3.6.1.4.1.21529.3.2.4.1.1not-accessiblecurrent
audioOutput1Entry
OBJECT-TYPE
Defining one source for the audio output 1
1.3.6.1.4.1.21529.3.2.4.1.1.1not-accessiblecurrent
audioOutput1Index
OBJECT-TYPE
Index of input source for audio output 1
1.3.6.1.4.1.21529.3.2.4.1.1.1.1Integer32 (1..4)not-accessiblecurrent
audioOutput1Order
OBJECT-TYPE
Order of input source for audio output 1 (main source or backup 1-3)
1.3.6.1.4.1.21529.3.2.4.1.1.1.2INTEGER {mainSource(1), backup1(2), backup2(3), backup3(4)}read-onlycurrent
audioOutput1InputSource
OBJECT-TYPE
Input source for audio output 1
1.3.6.1.4.1.21529.3.2.4.1.1.1.3InputSourceread-writecurrent
audioOutput1InputSourceEnabled
OBJECT-TYPE
Input source enabled state for audio output 1 (allows to temporarily disable an input source without the need to alter the input sources itself - by disabling e.g. the main source you can test the functionality of the first backup source, as it will automatically be activated when the main source gets disabled)
1.3.6.1.4.1.21529.3.2.4.1.1.1.4TruthValueread-writecurrent
audioOutput2Table
OBJECT-TYPE
Defining the main source and the (up to) three backup sources for the audio output 2
1.3.6.1.4.1.21529.3.2.4.1.2not-accessiblecurrent
audioOutput2Entry
OBJECT-TYPE
Defining one source for the audio output 2
1.3.6.1.4.1.21529.3.2.4.1.2.1not-accessiblecurrent
audioOutput2Index
OBJECT-TYPE
Index of input source for audio output 2
1.3.6.1.4.1.21529.3.2.4.1.2.1.1Integer32 (1..4)not-accessiblecurrent
audioOutput2Order
OBJECT-TYPE
Order of input source for audio output 2 (main source or backup 1-3)
1.3.6.1.4.1.21529.3.2.4.1.2.1.2INTEGER {mainSource(1), backup1(2), backup2(3), backup3(4)}read-onlycurrent
audioOutput2InputSource
OBJECT-TYPE
Input source for audio output 2
1.3.6.1.4.1.21529.3.2.4.1.2.1.3InputSourceread-writecurrent
audioOutput2InputSourceEnabled
OBJECT-TYPE
Input source enabled state for audio output 2 (allows to temporarily disable an input source without the need to alter the input sources itself - by disabling e.g. the main source you can test the functionality of the first backup source, as it will automatically be activated when the main source gets disabled)
1.3.6.1.4.1.21529.3.2.4.1.2.1.4TruthValueread-writecurrent
audioOutput3Table
OBJECT-TYPE
Defining the main source and the (up to) three backup sources for the audio output 2
1.3.6.1.4.1.21529.3.2.4.1.3not-accessiblecurrent
audioOutput3Entry
OBJECT-TYPE
Defining one source for the audio output 2
1.3.6.1.4.1.21529.3.2.4.1.3.1not-accessiblecurrent
audioOutput3Index
OBJECT-TYPE
Index of input source for audio output 2
1.3.6.1.4.1.21529.3.2.4.1.3.1.1Integer32 (1..4)not-accessiblecurrent
audioOutput3Order
OBJECT-TYPE
Order of input source for audio output 2 (main source or backup 1-3)
1.3.6.1.4.1.21529.3.2.4.1.3.1.2INTEGER {mainSource(1), backup1(2), backup2(3), backup3(4)}read-onlycurrent
audioOutput3InputSource
OBJECT-TYPE
Input source for audio output 2
1.3.6.1.4.1.21529.3.2.4.1.3.1.3InputSourceread-writecurrent
audioOutput3InputSourceEnabled
OBJECT-TYPE
Input source enabled state for audio output 2 (allows to temporarily disable an input source without the need to alter the input sources itself - by disabling e.g. the main source you can test the functionality of the first backup source, as it will automatically be activated when the main source gets disabled)
1.3.6.1.4.1.21529.3.2.4.1.3.1.4TruthValueread-writecurrent
audioOutput4Table
OBJECT-TYPE
Defining the main source and the (up to) three backup sources for the audio output 2
1.3.6.1.4.1.21529.3.2.4.1.4not-accessiblecurrent
audioOutput4Entry
OBJECT-TYPE
Defining one source for the audio output 2
1.3.6.1.4.1.21529.3.2.4.1.4.1not-accessiblecurrent
audioOutput4Index
OBJECT-TYPE
Index of input source for audio output 2
1.3.6.1.4.1.21529.3.2.4.1.4.1.1Integer32 (1..4)not-accessiblecurrent
audioOutput4Order
OBJECT-TYPE
Order of input source for audio output 2 (main source or backup 1-3)
1.3.6.1.4.1.21529.3.2.4.1.4.1.2INTEGER {mainSource(1), backup1(2), backup2(3), backup3(4)}read-onlycurrent
audioOutput4InputSource
OBJECT-TYPE
Input source for audio output 2
1.3.6.1.4.1.21529.3.2.4.1.4.1.3InputSourceread-writecurrent
audioOutput4InputSourceEnabled
OBJECT-TYPE
Input source enabled state for audio output 2 (allows to temporarily disable an input source without the need to alter the input sources itself - by disabling e.g. the main source you can test the functionality of the first backup source, as it will automatically be activated when the main source gets disabled)
1.3.6.1.4.1.21529.3.2.4.1.4.1.4TruthValueread-writecurrent
asiOutputTable
OBJECT-TYPE
Defining the main source and the (up to) two backup sources for the ASI output
1.3.6.1.4.1.21529.3.2.4.1.5not-accessiblecurrent
asiOutputEntry
OBJECT-TYPE
Defining one source for the ASI output
1.3.6.1.4.1.21529.3.2.4.1.5.1not-accessiblecurrent
asiOutputIndex
OBJECT-TYPE
Index of input source for the ASI output
1.3.6.1.4.1.21529.3.2.4.1.5.1.1Integer32 (1..3)not-accessiblecurrent
asiOutputOrder
OBJECT-TYPE
Order of input source for the ASI output (main source or backup 1-2)
1.3.6.1.4.1.21529.3.2.4.1.5.1.2INTEGER {mainSource(1), backup1(2), backup2(3)}read-onlycurrent
asiOutputInputSource
OBJECT-TYPE
Input source for the ASI output
1.3.6.1.4.1.21529.3.2.4.1.5.1.3InputSourceread-writecurrent
asiOutputInputSourceEnabled
OBJECT-TYPE
Input source enabled state for the ASI output (allows to temporarily disable an input source without the need to alter the input sources itself - by disabling e.g. the main source you can test the functionality of the first backup source, as it will automatically be activated when the main source gets disabled)
1.3.6.1.4.1.21529.3.2.4.1.5.1.4TruthValueread-writecurrent
ipOutputTable
OBJECT-TYPE
Defining the main source and the (up to) two backup sources for the IP 1000Base-T output
1.3.6.1.4.1.21529.3.2.4.1.6not-accessiblecurrent
ipOutputEntry
OBJECT-TYPE
Defining one source for the IP 1000Base-T output
1.3.6.1.4.1.21529.3.2.4.1.6.1not-accessiblecurrent
ipOutputIndex
OBJECT-TYPE
Index of input source for the IP 1000Base-T output
1.3.6.1.4.1.21529.3.2.4.1.6.1.1Integer32 (1..3)not-accessiblecurrent
ipOutputOrder
OBJECT-TYPE
Order of input source for the IP 1000Base-T output (main source or backup 1-2)
1.3.6.1.4.1.21529.3.2.4.1.6.1.2INTEGER {mainSource(1), backup1(2), backup2(3)}read-onlycurrent
ipOutputInputSource
OBJECT-TYPE
Input source for the IP 1000Base-T output
1.3.6.1.4.1.21529.3.2.4.1.6.1.3InputSourceread-writecurrent
ipOutputInputSourceEnabled
OBJECT-TYPE
Input source enabled state for the IP 1000Base-T output (allows to temporarily disable an input source without the need to alter the input sources itself - by disabling e.g. the main source you can test the functionality of the first backup source, as it will automatically be activated when the main source gets disabled)
1.3.6.1.4.1.21529.3.2.4.1.6.1.4TruthValueread-writecurrent
switchCriteria
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10
switchCriteriaTunerRfPower
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10.1
scTunerRfPowerEnabled
OBJECT-TYPE
Use the tuner RF power as a parameter to decide whether to switch the input source
1.3.6.1.4.1.21529.3.2.4.1.10.1.1TruthValueread-writecurrent
scTunerRfPowerValue
OBJECT-TYPE
RF power reference value
1.3.6.1.4.1.21529.3.2.4.1.10.1.2Integer32read-writecurrent
scTunerRfPowerTolerance
OBJECT-TYPE
RF power tolerance (amount of allowed variation of the actual RF power value compared to the reference value)
1.3.6.1.4.1.21529.3.2.4.1.10.1.3Unsigned32read-writecurrent
scTunerRfPowerT1
OBJECT-TYPE
The time period for which the value must be incorrect before the input source will get switched to the next available backup source
1.3.6.1.4.1.21529.3.2.4.1.10.1.4Integer32read-writecurrent
scTunerRfPowerT2
OBJECT-TYPE
The time period for which the value must be OK before the input source may switch back to this source
1.3.6.1.4.1.21529.3.2.4.1.10.1.5Integer32read-writecurrent
switchCriteriaTunerCn
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10.2
scTunerCnEnabled
OBJECT-TYPE
Use the tuner C/N value as a parameter to decide whether to switch the input source
1.3.6.1.4.1.21529.3.2.4.1.10.2.1TruthValueread-writecurrent
scTunerCnMinValue
OBJECT-TYPE
Tuner C/N minimum value considered OK
1.3.6.1.4.1.21529.3.2.4.1.10.2.2Integer32read-writecurrent
scTunerCnT1
OBJECT-TYPE
The time period for which the value must be incorrect before the input source will get switched to the next available backup source
1.3.6.1.4.1.21529.3.2.4.1.10.2.3Integer32read-writecurrent
scTunerCnT2
OBJECT-TYPE
The time period for which the value must be OK before the input source may switch back to this source
1.3.6.1.4.1.21529.3.2.4.1.10.2.4Integer32read-writecurrent
switchCriteriaTunerBer
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10.3
scTunerBerEnabled
OBJECT-TYPE
Use the tuner Viterbi/LDPC value as a parameter to decide whether to switch the input source
1.3.6.1.4.1.21529.3.2.4.1.10.3.1TruthValueread-writecurrent
scTunerBerMaxValue
OBJECT-TYPE
Tuner BER maximum value considered OK
1.3.6.1.4.1.21529.3.2.4.1.10.3.2FloatStringread-writecurrent
scTunerBerT1
OBJECT-TYPE
The time period for which the value must be incorrect before the input source will get switched to the next available backup source
1.3.6.1.4.1.21529.3.2.4.1.10.3.3Integer32read-writecurrent
scTunerBerT2
OBJECT-TYPE
The time period for which the value must be OK before the input source may switch back to this source
1.3.6.1.4.1.21529.3.2.4.1.10.3.4Integer32read-writecurrent
switchCriteriaTunerTsSync
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10.4
scTunerTsSyncEnabled
OBJECT-TYPE
Use the TS sync status from the transport stream received via the SAT tuner as a parameter to decide whether to switch the input source
1.3.6.1.4.1.21529.3.2.4.1.10.4.1TruthValueread-writecurrent
scTunerTsSyncT1
OBJECT-TYPE
The time period for which the status must be faulty before the input source will get switched to the next available backup source
1.3.6.1.4.1.21529.3.2.4.1.10.4.2Integer32read-writecurrent
scTunerTsSyncT2
OBJECT-TYPE
The time period for which the status must be OK before the input source may switch back to this source
1.3.6.1.4.1.21529.3.2.4.1.10.4.3Integer32read-writecurrent
switchCriteriaAsiTsSync
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10.5
scAsiTsSyncEnabled
OBJECT-TYPE
Use the TS sync status from the transport stream received via the ASI input as a parameter to decide whether to switch the input source
1.3.6.1.4.1.21529.3.2.4.1.10.5.1TruthValueread-writecurrent
scAsiTsSyncT1
OBJECT-TYPE
The time period for which the status must be faulty before the input source will get switched to the next available backup source
1.3.6.1.4.1.21529.3.2.4.1.10.5.2Integer32read-writecurrent
scAsiTsSyncT2
OBJECT-TYPE
The time period for which the status must be OK before the input source may switch back to this source
1.3.6.1.4.1.21529.3.2.4.1.10.5.3Integer32read-writecurrent
switchCriteriaIpTsSync
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10.6
scIpTsSyncEnabled
OBJECT-TYPE
Use the TS sync status from the transport stream received via the IP 1000Base-T input as a parameter to decide whether to switch the input source
1.3.6.1.4.1.21529.3.2.4.1.10.6.1TruthValueread-writecurrent
scIpTsSyncT1
OBJECT-TYPE
The time period for which the status must be faulty before the input source will get switched to the next available backup source
1.3.6.1.4.1.21529.3.2.4.1.10.6.2Integer32read-writecurrent
scIpTsSyncT2
OBJECT-TYPE
The time period for which the status must be OK before the input source may switch back to this source
1.3.6.1.4.1.21529.3.2.4.1.10.6.3Integer32read-writecurrent
switchCriteriaAudioOverIpUdp
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10.7
scAudioOverIpUdpEnabled
OBJECT-TYPE
Use the presence/absence of Audio over IP (UDP) input data as a parameter to decide whether to switch the input source
1.3.6.1.4.1.21529.3.2.4.1.10.7.1TruthValueread-writecurrent
scAudioOverIpUdpT1
OBJECT-TYPE
The time period for which the status must be faulty before the input source will get switched to the next available backup source
1.3.6.1.4.1.21529.3.2.4.1.10.7.2Integer32read-writecurrent
scAudioOverIpUdpT2
OBJECT-TYPE
The time period for which the status must be OK before the input source may switch back to this source
1.3.6.1.4.1.21529.3.2.4.1.10.7.3Integer32read-writecurrent
switchCriteriaAudioOverIpIcecast
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10.8
scAudioOverIpIcecastEnabled
OBJECT-TYPE
Use the presence/absence of Audio over IP (Icecast) input data as a parameter to decide whether to switch the input source
1.3.6.1.4.1.21529.3.2.4.1.10.8.1TruthValueread-writecurrent
scAudioOverIpIcecastT1
OBJECT-TYPE
The time period for which the status must be faulty before the input source will get switched to the next available backup source
1.3.6.1.4.1.21529.3.2.4.1.10.8.2Integer32read-writecurrent
scAudioOverIpIcecastT2
OBJECT-TYPE
The time period for which the status must be OK before the input source may switch back to this source
1.3.6.1.4.1.21529.3.2.4.1.10.8.3Integer32read-writecurrent
switchCriteriaInternalStorage
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10.9
scInternalStorageEnabled
OBJECT-TYPE
Use the status of the internal storage as a parameter to decide whether to switch the input source
1.3.6.1.4.1.21529.3.2.4.1.10.9.1TruthValueread-writecurrent
switchCriteriaIpPer
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.1.10.10
scIpPerEnabled
OBJECT-TYPE
Use the IP PER value as a parameter to decide whether to switch the input source
1.3.6.1.4.1.21529.3.2.4.1.10.10.1TruthValueread-writecurrent
scIpPerMode
OBJECT-TYPE
Selecting the stream to measure PER
1.3.6.1.4.1.21529.3.2.4.1.10.10.2INTEGER {combinedStream(1), mainStream(2), bothStreams(3)}read-writecurrent
scIpPerValue
OBJECT-TYPE
IP PER value considered OK
1.3.6.1.4.1.21529.3.2.4.1.10.10.3FloatStringread-writecurrent
scIpPerT1
OBJECT-TYPE
The time period for which the value must be incorrect before the input source will get switched to the next available backup source
1.3.6.1.4.1.21529.3.2.4.1.10.10.4Integer32read-writecurrent
scIpPerT2
OBJECT-TYPE
The time period for which the value must be OK before the input source may switch back to this source
1.3.6.1.4.1.21529.3.2.4.1.10.10.5Integer32read-writecurrent
interfaceSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.3
xlrInterface
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.3.1
xlrVolumeTable
OBJECT-TYPE
Audio level adjustment for the different audio outputs
1.3.6.1.4.1.21529.3.2.4.3.1.1not-accessiblecurrent
xlrVolumeEntry
OBJECT-TYPE
Audio level adjustment for one audio output
1.3.6.1.4.1.21529.3.2.4.3.1.1.1not-accessiblecurrent
xlrVolumeIndex
OBJECT-TYPE
Index of XLR volume
1.3.6.1.4.1.21529.3.2.4.3.1.1.1.1Integer32 (1..4)not-accessiblecurrent
xlrVolumePort
OBJECT-TYPE
XLR volume port / audio output (Audio1 or Audio2)
1.3.6.1.4.1.21529.3.2.4.3.1.1.1.2INTEGER {audio1(1), audio2(2), audio3(3), audio4(4)}read-onlycurrent
xlrVolumeAnalog
OBJECT-TYPE
Analog level adjustment
1.3.6.1.4.1.21529.3.2.4.3.1.1.1.3Integer32d1 (-360..60)read-writecurrent
xlrVolumeDigital
OBJECT-TYPE
Digital level adjustment
1.3.6.1.4.1.21529.3.2.4.3.1.1.1.4Integer32d1 (-360..60)read-writecurrent
xlrOutputType
OBJECT-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.3.1.1.1.5INTEGER {off(1), analog(2), digital(3)}read-writecurrent
audioLowPass15kHz
OBJECT-TYPE
Enable/disable 15 kHz audio low pass filter
1.3.6.1.4.1.21529.3.2.4.3.1.99TruthValueread-writecurrent
headphoneInterface
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.3.2
headphoneVolume
OBJECT-TYPE
Headphone volume
1.3.6.1.4.1.21529.3.2.4.3.2.1Integer32d1 (-360..60)read-writecurrent
headphoneAudioChannel
OBJECT-TYPE
Audio channel to monitor via the headphone
1.3.6.1.4.1.21529.3.2.4.3.2.2INTEGER {off(0), audio1(1), audio2(2), audio3(3), audio4(4)}read-writecurrent
dteInterface
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.3.3
dteInterfaceTable
OBJECT-TYPE
Settings for the different DTE ports
1.3.6.1.4.1.21529.3.2.4.3.3.1not-accessiblecurrent
dteInterfaceEntry
OBJECT-TYPE
Settings for one DTE port
1.3.6.1.4.1.21529.3.2.4.3.3.1.1not-accessiblecurrent
dteInterfaceIndex
OBJECT-TYPE
Index of DTE interface settings
1.3.6.1.4.1.21529.3.2.4.3.3.1.1.1Integer32 (1..9)not-accessiblecurrent
dteInterfacePort
OBJECT-TYPE
DTE port
1.3.6.1.4.1.21529.3.2.4.3.3.1.1.2INTEGER {dteFront(1), dte1(2), dte2(3), dte3(4), dte4(5), dte5(6), dte6(7), dte7(8), dte8(9)}read-onlycurrent
dteInterfaceBaudrate
OBJECT-TYPE
DTE baud rate
1.3.6.1.4.1.21529.3.2.4.3.3.1.1.3Integer32 (1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200)read-writecurrent
state
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4
tunerState
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.1
rfPowerValue
OBJECT-TYPE
Current RF power value
1.3.6.1.4.1.21529.3.2.4.4.1.1Integer32read-onlycurrent
cnValue
OBJECT-TYPE
Current C/N value
1.3.6.1.4.1.21529.3.2.4.4.1.2Integer32read-onlycurrent
cfoErrorValue
OBJECT-TYPE
Current CFO (Center Frequency Offset) value
1.3.6.1.4.1.21529.3.2.4.4.1.3Integer32d2read-onlycurrent
agcState
OBJECT-TYPE
Current AGC (automatic gain control) state
1.3.6.1.4.1.21529.3.2.4.4.1.4FaultOKread-onlycurrent
ceState
OBJECT-TYPE
Current CE state
1.3.6.1.4.1.21529.3.2.4.4.1.5FaultOKread-onlycurrent
symTimeState
OBJECT-TYPE
Current symbol time state
1.3.6.1.4.1.21529.3.2.4.4.1.6FaultOKread-onlycurrent
carrierState
OBJECT-TYPE
Current carrier state
1.3.6.1.4.1.21529.3.2.4.4.1.7FaultOKread-onlycurrent
fecLockedState
OBJECT-TYPE
Current FEC locked state
1.3.6.1.4.1.21529.3.2.4.4.1.8FaultOKread-onlycurrent
lockedState
OBJECT-TYPE
Current Tuner locked state
1.3.6.1.4.1.21529.3.2.4.4.1.9FaultOKread-onlycurrent
punctureRate
OBJECT-TYPE
Current puncture rate
1.3.6.1.4.1.21529.3.2.4.4.1.10OCTET STRINGread-onlycurrent
viterbiLdpcBerValue
OBJECT-TYPE
Current Viterbi/LDPC BER value
1.3.6.1.4.1.21529.3.2.4.4.1.11FloatStringread-onlycurrent
rsBchBerValue
OBJECT-TYPE
Current RS/BCH BER value
1.3.6.1.4.1.21529.3.2.4.4.1.12FloatStringread-onlycurrent
tunerAlarmTable
OBJECT-TYPE
Status of the different tuner alarms
1.3.6.1.4.1.21529.3.2.4.4.1.20not-accessiblecurrent
tunerAlarmEntry
OBJECT-TYPE
Status of one tuner alarm
1.3.6.1.4.1.21529.3.2.4.4.1.20.1not-accessiblecurrent
tunerAlarmIndex
OBJECT-TYPE
Index of the tuner alarm
1.3.6.1.4.1.21529.3.2.4.4.1.20.1.1Integer32 (1..6)not-accessiblecurrent
tunerAlarmType
OBJECT-TYPE
Type of tuner alarm
1.3.6.1.4.1.21529.3.2.4.4.1.20.1.2INTEGER {rfPowerAlarm(1), cnAlarm(2), berAlarm(3)}read-onlycurrent
tunerAlarmActive
OBJECT-TYPE
State of the tuner alarm (active/inactive)
1.3.6.1.4.1.21529.3.2.4.4.1.20.1.3TruthValueread-onlycurrent
tsState
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.2
nid
OBJECT-TYPE
Current DVB network ID
1.3.6.1.4.1.21529.3.2.4.4.2.1DisplayStringread-onlycurrent
tunerDatarate
OBJECT-TYPE
Current tuner input TS data rate
1.3.6.1.4.1.21529.3.2.4.4.2.2Integer32read-onlycurrent
asiDatarate
OBJECT-TYPE
Current ASI input TS data rate
1.3.6.1.4.1.21529.3.2.4.4.2.3Integer32read-onlycurrent
ipDatarate
OBJECT-TYPE
Current IP 1000Base-T input TS data rate
1.3.6.1.4.1.21529.3.2.4.4.2.4Integer32read-onlycurrent
etr290Conformity
OBJECT-TYPE
Current ETR290 conformity (only basic checks)
1.3.6.1.4.1.21529.3.2.4.4.2.5FaultOKread-onlycurrent
etr290ConformityAlarmActive
OBJECT-TYPE
State of the ETR290 conformity alarm (active/inactive)
1.3.6.1.4.1.21529.3.2.4.4.2.6TruthValueread-onlycurrent
tsSyncTable
OBJECT-TYPE
Current TS sync state of the different TS input streams
1.3.6.1.4.1.21529.3.2.4.4.2.10not-accessiblecurrent
tsSyncEntry
OBJECT-TYPE
Current TS sync state of one TS input stream
1.3.6.1.4.1.21529.3.2.4.4.2.10.1not-accessiblecurrent
tsSyncIndex
OBJECT-TYPE
Transport stream index
1.3.6.1.4.1.21529.3.2.4.4.2.10.1.1Integer32 (1..3)not-accessiblecurrent
tsSyncType
OBJECT-TYPE
Transport Stream input type
1.3.6.1.4.1.21529.3.2.4.4.2.10.1.2INTEGER {tunerTs(1), asiTs(2), ipTs(3)}read-onlycurrent
tsSyncState
OBJECT-TYPE
Transport Stream Sync state
1.3.6.1.4.1.21529.3.2.4.4.2.10.1.3FaultOKread-onlycurrent
tsSyncAlarmActive
OBJECT-TYPE
State of the Transport Stream Sync alarm (active/inactive)
1.3.6.1.4.1.21529.3.2.4.4.2.10.1.4TruthValueread-onlycurrent
tsOverIp
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.2.11
tsIpSync
OBJECT-TYPE
TS Sync for IP 1000Base-T active.
1.3.6.1.4.1.21529.3.2.4.4.2.11.1TruthValueread-onlycurrent
tsIpPacketPerIpPacket
OBJECT-TYPE
TS packet(s) per IP packet
1.3.6.1.4.1.21529.3.2.4.4.2.11.2Integer32read-onlycurrent
tsIpBufferlevel1
OBJECT-TYPE
Buffer level (configured)
1.3.6.1.4.1.21529.3.2.4.4.2.11.3Integer32read-onlycurrent
tsIpBufferlevel2
OBJECT-TYPE
Buffer level (time measured)
1.3.6.1.4.1.21529.3.2.4.4.2.11.4Integer32read-onlycurrent
tsIpBufferlevel3
OBJECT-TYPE
Buffer level (TS packets measured)
1.3.6.1.4.1.21529.3.2.4.4.2.11.5Integer32read-onlycurrent
tsIpBufferReset
OBJECT-TYPE
Buffer reset counter
1.3.6.1.4.1.21529.3.2.4.4.2.11.6Integer32read-onlycurrent
tsIpPacketDropped
OBJECT-TYPE
IP packets dropped
1.3.6.1.4.1.21529.3.2.4.4.2.11.7Integer32read-onlycurrent
tsIpPacketReordered
OBJECT-TYPE
IP packets reordered
1.3.6.1.4.1.21529.3.2.4.4.2.11.8Integer32read-onlycurrent
tsIpPacketRestored
OBJECT-TYPE
IP packets restored (FEC)
1.3.6.1.4.1.21529.3.2.4.4.2.11.9Integer32read-onlycurrent
tsIpPacketUnrecoverable
OBJECT-TYPE
IP packets unrecoverable (FEC)
1.3.6.1.4.1.21529.3.2.4.4.2.11.10Integer32read-onlycurrent
tsIpFecL
OBJECT-TYPE
FEC column count L
1.3.6.1.4.1.21529.3.2.4.4.2.11.11Integer32read-onlycurrent
tsIpFecD
OBJECT-TYPE
FEC row count D
1.3.6.1.4.1.21529.3.2.4.4.2.11.12Integer32read-onlycurrent
tsIpPacketDuplicate
OBJECT-TYPE
IP packets twice received (FEC)
1.3.6.1.4.1.21529.3.2.4.4.2.11.13Integer32read-onlycurrent
tsIpPER
OBJECT-TYPE
Packet error rate
1.3.6.1.4.1.21529.3.2.4.4.2.11.14FloatStringread-onlycurrent
tsIpPLR
OBJECT-TYPE
Packet loss rate
1.3.6.1.4.1.21529.3.2.4.4.2.11.15FloatStringread-onlycurrent
tsIpErroneousPacketrate
OBJECT-TYPE
Received packets with CRC errors
1.3.6.1.4.1.21529.3.2.4.4.2.11.16FloatStringread-onlycurrent
tsIpDualInput
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.2.11.17
tsIpBackupPER
OBJECT-TYPE
Packet error rate of second input stream
1.3.6.1.4.1.21529.3.2.4.4.2.11.17.1FloatStringread-onlycurrent
tsIpBackupPLR
OBJECT-TYPE
Packet loss rate of second input stream
1.3.6.1.4.1.21529.3.2.4.4.2.11.17.2FloatStringread-onlycurrent
tsIpBackupErroneousPacketrate
OBJECT-TYPE
Received packets of second input stream with CRC errors
1.3.6.1.4.1.21529.3.2.4.4.2.11.17.3FloatStringread-onlycurrent
tsIpCombinedPER
OBJECT-TYPE
Packet error rate after packet restoration (FEC and dual input)
1.3.6.1.4.1.21529.3.2.4.4.2.11.17.4FloatStringread-onlycurrent
tsIpModePER
OBJECT-TYPE
Packet error rate of selected mode for events
1.3.6.1.4.1.21529.3.2.4.4.2.11.18FloatStringaccessible-for-notifycurrent
audioOverIpState
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.3
udpInputDataTable
OBJECT-TYPE
State of the Audio over IP (UDP) input data channels
1.3.6.1.4.1.21529.3.2.4.4.3.1not-accessiblecurrent
udpInputDataEntry
OBJECT-TYPE
State of one Audio over IP (UDP) input data channel
1.3.6.1.4.1.21529.3.2.4.4.3.1.1not-accessiblecurrent
udpInputDataIndex
OBJECT-TYPE
Audio over IP (UDP) input data channel index
1.3.6.1.4.1.21529.3.2.4.4.3.1.1.1Integer32 (1..4)not-accessiblecurrent
udpInputDataChannel
OBJECT-TYPE
Audio over IP (UDP) input data channel
1.3.6.1.4.1.21529.3.2.4.4.3.1.1.2INTEGER {channel1(1), channel2(2), channel3(3), channel4(4)}read-onlycurrent
udpInputDataState
OBJECT-TYPE
Audio over IP (UDP) input data channel state (presence/absence of input data)
1.3.6.1.4.1.21529.3.2.4.4.3.1.1.3FaultOKread-onlycurrent
udpInputDataAlarmActive
OBJECT-TYPE
State of the Audio over IP (UDP) input data channel alarm (active/inactive)
1.3.6.1.4.1.21529.3.2.4.4.3.1.1.4TruthValueread-onlycurrent
icecastInputDataTable
OBJECT-TYPE
State of the Audio over IP (Icecast) input data servers
1.3.6.1.4.1.21529.3.2.4.4.3.2not-accessiblecurrent
icecastInputDataEntry
OBJECT-TYPE
State of one Audio over IP (Icecast) input data server
1.3.6.1.4.1.21529.3.2.4.4.3.2.1not-accessiblecurrent
icecastInputDataIndex
OBJECT-TYPE
Audio over IP (Icecast) input data server index
1.3.6.1.4.1.21529.3.2.4.4.3.2.1.1Integer32 (1..4)not-accessiblecurrent
icecastInputDataServer
OBJECT-TYPE
Audio over IP (Icecast) input data server
1.3.6.1.4.1.21529.3.2.4.4.3.2.1.2INTEGER {server1(1), server2(2), server3(3), server4(4)}read-onlycurrent
icecastInputDataState
OBJECT-TYPE
Audio over IP (Icecast) input data server state (presence/absence of input data)
1.3.6.1.4.1.21529.3.2.4.4.3.2.1.3FaultOKread-onlycurrent
icecastInputDataAlarmActive
OBJECT-TYPE
State of the Audio over IP (Icecast) input data server alarm (active/inactive)
1.3.6.1.4.1.21529.3.2.4.4.3.2.1.4TruthValueread-onlycurrent
rtpUdpInputDataTable
OBJECT-TYPE
State of the Audio over IP (RTP/UDP) connections
1.3.6.1.4.1.21529.3.2.4.4.3.3not-accessiblecurrent
rtpUdpInputDataEntry
OBJECT-TYPE
State of the Audio over IP (RTP/UDP) connection
1.3.6.1.4.1.21529.3.2.4.4.3.3.1not-accessiblecurrent
rtpUdpInputDataIndex
OBJECT-TYPE
State of the Audio over IP (RTP/UDP) connection index
1.3.6.1.4.1.21529.3.2.4.4.3.3.1.1Integer32 (1..4)not-accessiblecurrent
rtpUdpInputDataPackets
OBJECT-TYPE
Packets/sec
1.3.6.1.4.1.21529.3.2.4.4.3.3.1.2Integer32read-onlycurrent
rtpUdpInputDataRtpDataRate
OBJECT-TYPE
RTP data rate
1.3.6.1.4.1.21529.3.2.4.4.3.3.1.3Integer32read-onlycurrent
rtpUdpInputDataIpRawDataRate
OBJECT-TYPE
IP raw data rate
1.3.6.1.4.1.21529.3.2.4.4.3.3.1.4Integer32read-onlycurrent
rtpUdpInputDataRtpPacketloss
OBJECT-TYPE
RTP packet loss counter
1.3.6.1.4.1.21529.3.2.4.4.3.3.1.5Integer32read-onlycurrent
audioState
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.4
audioTable
OBJECT-TYPE
State of the different audio channels
1.3.6.1.4.1.21529.3.2.4.4.4.1not-accessiblecurrent
audioEntry
OBJECT-TYPE
State of one audio channel
1.3.6.1.4.1.21529.3.2.4.4.4.1.1not-accessiblecurrent
audioIndex
OBJECT-TYPE
Audio channel index
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.1Integer32 (1..4)not-accessiblecurrent
audioChannel
OBJECT-TYPE
Audio channel
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.2INTEGER {audio1(1), audio2(2), audio3(3), audio4(4)}read-onlycurrent
audioStatus
OBJECT-TYPE
presence/absence of audio data ok -> audio is ok fault -> audio is not ok
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.3FaultOKread-onlycurrent
audioVersion
OBJECT-TYPE
Audio version
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.4INTEGER {mpeg1(1), mpeg2(2), ac3(3), mpeg4(4), aptX(5), linearPCM(6)}read-onlycurrent
audioLayer
OBJECT-TYPE
Audio layer
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.5INTEGER {layer1(1), layer2(2), layer3(3), aac(4)}read-onlycurrent
audioBitRate
OBJECT-TYPE
Audio bit rate
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.6Integer32read-onlycurrent
audioSampleRate
OBJECT-TYPE
Audio sample rate
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.7Integer32read-onlycurrent
audioAlarmActive
OBJECT-TYPE
State of the audio alarm (inactive/active - presence/absence of audio data)
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.8TruthValueread-onlycurrent
audioLevel
OBJECT-TYPE
Current audio level
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.9Integer32d1read-onlycurrent
audioLevelAlarmActive
OBJECT-TYPE
State of the audio level alarm (inactive/active - silence detection)
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.10TruthValueread-onlycurrent
audioNoDataAvailabe
OBJECT-TYPE
Everytime a empty audio frame is send out, because of no input data.
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.11Integer32read-onlycurrent
audioDecoderResets
OBJECT-TYPE
Decoder reset counter
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.12Integer32read-onlycurrent
audioBufferlevel
OBJECT-TYPE
Audio decoder buffer level
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.13Integer32read-onlycurrent
audioPLLlevel
OBJECT-TYPE
Audio PLL speed indicator
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.14Integer32 (-1000..1000)read-onlycurrent
audioTsError
OBJECT-TYPE
Transportstream Error Counter
1.3.6.1.4.1.21529.3.2.4.4.4.1.1.15Integer32read-onlycurrent
audioTsTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.4.4.2not-accessiblecurrent
audioTsEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.4.4.2.1not-accessiblecurrent
audioTsIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.4.4.2.1.1Integer32 (1..4)not-accessiblecurrent
audioTsMode
OBJECT-TYPE
Selected service mode
1.3.6.1.4.1.21529.3.2.4.4.4.2.1.2ServiceModeread-onlycurrent
audioTsService
OBJECT-TYPE
Service name
1.3.6.1.4.1.21529.3.2.4.4.4.2.1.3OCTET STRINGread-onlycurrent
audioTsPID
OBJECT-TYPE
PID of the audio stream
1.3.6.1.4.1.21529.3.2.4.4.4.2.1.4Integer32read-onlycurrent
dteState
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.5
dteTable
OBJECT-TYPE
State of the different DTE outputs (data present/absent)
1.3.6.1.4.1.21529.3.2.4.4.5.1not-accessiblecurrent
dteEntry
OBJECT-TYPE
State of one DTE output (data present/absent)
1.3.6.1.4.1.21529.3.2.4.4.5.1.1not-accessiblecurrent
dteIndex
OBJECT-TYPE
DTE index
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.1Integer32 (1..8)not-accessiblecurrent
dtePort
OBJECT-TYPE
DTE port
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.2INTEGER {dte1(1), dte2(2), dte3(3), dte4(4), dte5(5), dte6(6), dte7(7), dte8(8)}read-onlycurrent
dteDataAvailable
OBJECT-TYPE
presence/absence of DTE data
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.3TruthValueread-onlycurrent
dteAlarmActive
OBJECT-TYPE
State of the DTE alarm (presence/absence of data)
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.4TruthValueread-onlycurrent
dteUecpPI
OBJECT-TYPE
Current RDS PI value
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.5OCTET STRINGread-onlycurrent
dteUecpPS
OBJECT-TYPE
Current RDS PS
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.6OCTET STRINGread-onlycurrent
dteUecpRT
OBJECT-TYPE
Current RDS RadioText (RT)
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.7OCTET STRINGread-onlycurrent
dteUecpTA
OBJECT-TYPE
Current RDS TA (0/1)
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.8Integer32read-onlycurrent
dteUecpTP
OBJECT-TYPE
Current RDS TP (0/1)
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.9Integer32read-onlycurrent
dteUecpPTY
OBJECT-TYPE
Current RDS PTY
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.10Integer32read-onlycurrent
dteUecpCT
OBJECT-TYPE
Current RDS CT
1.3.6.1.4.1.21529.3.2.4.4.5.1.1.11DateAndTimeread-onlycurrent
inputSourceState
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.6
currentInputSourceTable
OBJECT-TYPE
Type of input source currently used for the different outputs and its state
1.3.6.1.4.1.21529.3.2.4.4.6.1not-accessiblecurrent
currentInputSourceEntry
OBJECT-TYPE
Type of input source currently used for one output and its state
1.3.6.1.4.1.21529.3.2.4.4.6.1.1not-accessiblecurrent
currentInputSourceIndex
OBJECT-TYPE
Output type index
1.3.6.1.4.1.21529.3.2.4.4.6.1.1.1Integer32 (1..6)not-accessiblecurrent
outputType
OBJECT-TYPE
Output type
1.3.6.1.4.1.21529.3.2.4.4.6.1.1.2INTEGER {audioOutput1(1), audioOutput2(2), audioOutput3(3), audioOutput4(4), asiOutput(5), ipOutput(6)}read-onlycurrent
currentInputSourceState
OBJECT-TYPE
State of the currently active input source
1.3.6.1.4.1.21529.3.2.4.4.6.1.1.3FaultOKread-onlycurrent
currentInputSourceOrder
OBJECT-TYPE
Order of the currently active input source (main source or backup)
1.3.6.1.4.1.21529.3.2.4.4.6.1.1.4INTEGER {temporaryMasterSource(1), mainSource(2), backup1(3), backup2(4), backup3(5)}read-onlycurrent
currentInputSourceType
OBJECT-TYPE
Type of the currently active input source
1.3.6.1.4.1.21529.3.2.4.4.6.1.1.5InputSourceread-onlycurrent
deviceState
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.7
internalStorageState
OBJECT-TYPE
State of the internal storage
1.3.6.1.4.1.21529.3.2.4.4.7.1FaultOKread-onlycurrent
internalStorageFreeMemory
OBJECT-TYPE
Available free memory in the internal storage
1.3.6.1.4.1.21529.3.2.4.4.7.2Integer32read-onlycurrent
caseTemperature
OBJECT-TYPE
Current case temperature
1.3.6.1.4.1.21529.3.2.4.4.7.3Integer32read-onlycurrent
caseTemperatureAlarmActive
OBJECT-TYPE
State of the case temperature alarm (active/inactive)
1.3.6.1.4.1.21529.3.2.4.4.7.4TruthValueread-onlycurrent
optoInputTable
OBJECT-TYPE
Table of the optical coupler state
1.3.6.1.4.1.21529.3.2.4.4.7.10not-accessiblecurrent
optoInputEntry
OBJECT-TYPE
One optical coupler state
1.3.6.1.4.1.21529.3.2.4.4.7.10.1not-accessiblecurrent
optoInputIndex
OBJECT-TYPE
Optical coupler index
1.3.6.1.4.1.21529.3.2.4.4.7.10.1.1Integer32 (1..7)not-accessiblecurrent
optoInputNumber
OBJECT-TYPE
Optical coupler number
1.3.6.1.4.1.21529.3.2.4.4.7.10.1.2Integer32 (1..7)read-onlycurrent
optoInputState
OBJECT-TYPE
Optical coupler state
1.3.6.1.4.1.21529.3.2.4.4.7.10.1.3INTEGER {off(1), on(2)}read-onlycurrent
internalStorageTable
OBJECT-TYPE
Table of the internal storage usage
1.3.6.1.4.1.21529.3.2.4.4.7.11not-accessiblecurrent
internalStorageEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.4.7.11.1not-accessiblecurrent
internalStorageIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.4.7.11.1.1Integer32 (1..5)not-accessiblecurrent
internalStorageSection
OBJECT-TYPE
Section of the internal storage
1.3.6.1.4.1.21529.3.2.4.4.7.11.1.2INTEGER {device(1), audio1(2), audio2(3), audio3(4), audio4(5)}read-onlycurrent
internalStorageFree
OBJECT-TYPE
Amount of available free memory
1.3.6.1.4.1.21529.3.2.4.4.7.11.1.3Integer32read-onlycurrent
internalStorageQuota
OBJECT-TYPE
Assigned storage quota or total memory size
1.3.6.1.4.1.21529.3.2.4.4.7.11.1.4Integer32read-onlycurrent
internalStorageQuotaUsed
OBJECT-TYPE
Amount of memory used
1.3.6.1.4.1.21529.3.2.4.4.7.11.1.5Integer32read-onlycurrent
eventParams
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.8
remoteControlUploadEventParams
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.8.1
remoteControlUploadType
OBJECT-TYPE
Type of remote control upload
1.3.6.1.4.1.21529.3.2.4.4.8.1.1INTEGER {firmware(1), configuration(2), audio(3)}accessible-for-notifycurrent
remoteControlUploadError
OBJECT-TYPE
Type of remote control upload error
1.3.6.1.4.1.21529.3.2.4.4.8.1.2INTEGER {crcError(1), storageQuotaExceeded(2)}accessible-for-notifycurrent
remoteControlUploadGroup
OBJECT-TYPE
Group name used for remote control upload
1.3.6.1.4.1.21529.3.2.4.4.8.1.3OCTET STRINGaccessible-for-notifycurrent
remoteControlUploadFile
OBJECT-TYPE
Name of file tried to upload via remote control
1.3.6.1.4.1.21529.3.2.4.4.8.1.4OCTET STRINGaccessible-for-notifycurrent
sfnState
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.4.9
sfnActive
OBJECT-TYPE
SFN mode active
1.3.6.1.4.1.21529.3.2.4.4.9.1TruthValueread-onlycurrent
sfn1ppsErrorCount
OBJECT-TYPE
1PPS error counter
1.3.6.1.4.1.21529.3.2.4.4.9.2Integer32read-onlycurrent
sfn10MHzErrorCount
OBJECT-TYPE
10MHz error counter
1.3.6.1.4.1.21529.3.2.4.4.9.3Integer32read-onlycurrent
sfnBufferlevel
OBJECT-TYPE
SFN buffer level
1.3.6.1.4.1.21529.3.2.4.4.9.4Integer32read-onlycurrent
sfnResetCount
OBJECT-TYPE
SFN reset counter
1.3.6.1.4.1.21529.3.2.4.4.9.5Integer32read-onlycurrent
sfnTransmissionDelay
OBJECT-TYPE
Transmission delay
1.3.6.1.4.1.21529.3.2.4.4.9.6Integer32read-onlycurrent
sfnGlobalDelay
OBJECT-TYPE
Global delay
1.3.6.1.4.1.21529.3.2.4.4.9.7Integer32read-onlycurrent
sfnAccuracy
OBJECT-TYPE
Accuracy of SFN
1.3.6.1.4.1.21529.3.2.4.4.9.8Integer32d1read-onlycurrent
sfn1ppsErrorState
OBJECT-TYPE
1PPS error detected
1.3.6.1.4.1.21529.3.2.4.4.9.9TruthValueaccessible-for-notifycurrent
sfn10MHzErrorState
OBJECT-TYPE
10MHz error detected
1.3.6.1.4.1.21529.3.2.4.4.9.10TruthValueaccessible-for-notifycurrent
flexDSR04EventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5
tunerRfPowerEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.1
tunerRfPowerEventValue
OBJECT-TYPE
RF power reference value
1.3.6.1.4.1.21529.3.2.4.5.1.1Integer32read-writecurrent
tunerRfPowerEventTolerance
OBJECT-TYPE
RF power tolerance (amount of allowed variation of the actual RF power value compared to the reference value)
1.3.6.1.4.1.21529.3.2.4.5.1.2Integer32read-writecurrent
tunerRfPowerEventT1
OBJECT-TYPE
The time period for which the value must be incorrect before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.1.3Integer32read-writecurrent
tunerRfPowerEventT2
OBJECT-TYPE
The time period for which the value must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.1.4Integer32read-writecurrent
tunerRfPowerEventEnable
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.1.5TruthValueread-writecurrent
tunerCnEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.2
tunerCnEventMinValue
OBJECT-TYPE
Tuner C/N minimum value considered OK
1.3.6.1.4.1.21529.3.2.4.5.2.1Integer32read-writecurrent
tunerCnEventT1
OBJECT-TYPE
The time period for which the value must be incorrect before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.2.2Integer32read-writecurrent
tunerCnEventT2
OBJECT-TYPE
The time period for which the value must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.2.3Integer32read-writecurrent
tunerCnEventEnable
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.2.4TruthValueread-writecurrent
tunerBerEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.3
tunerBerEventMaxValue
OBJECT-TYPE
Tuner BER maximum value considered OK
1.3.6.1.4.1.21529.3.2.4.5.3.1FloatStringread-writecurrent
tunerBerEventT1
OBJECT-TYPE
The time period for which the value must be incorrect before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.3.2Integer32read-writecurrent
tunerBerEventT2
OBJECT-TYPE
The time period for which the value must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.3.3Integer32read-writecurrent
tunerBerEventEnable
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.3.4TruthValueread-writecurrent
tunerTsSyncEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.4
tunerTsSyncEventT1
OBJECT-TYPE
The time period for which the status must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.4.1Integer32read-writecurrent
tunerTsSyncEventT2
OBJECT-TYPE
The time period for which the status must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.4.2Integer32read-writecurrent
tunerTsSyncEventEnable
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.4.3TruthValueread-writecurrent
asiTsSyncEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.5
asiTsSyncEventT1
OBJECT-TYPE
The time period for which the status must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.5.1Integer32read-writecurrent
asiTsSyncEventT2
OBJECT-TYPE
The time period for which the status must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.5.2Integer32read-writecurrent
asiTsSyncEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.5.3TruthValueread-writecurrent
ipTsSyncEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.6
ipTsSyncEventT1
OBJECT-TYPE
The time period for which the status must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.6.1Integer32read-writecurrent
ipTsSyncEventT2
OBJECT-TYPE
The time period for which the status must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.6.2Integer32read-writecurrent
ipTsSyncEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.6.3TruthValueread-writecurrent
etr290ConformityEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.7
etr290ConformityEventEnable
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.7.1TruthValueread-writeobsolete
aoipUdpInputDataEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.8
aoipUdpInputDataEventTable
OBJECT-TYPE
Settings for the different Audio over IP (UDP) channel alarms
1.3.6.1.4.1.21529.3.2.4.5.8.1not-accessiblecurrent
aoipUdpInputDataEventEntry
OBJECT-TYPE
Settings for one Audio over IP (UDP) channel alarm
1.3.6.1.4.1.21529.3.2.4.5.8.1.1not-accessiblecurrent
aoipUdpInputDataEventIndex
OBJECT-TYPE
Audio over IP (UDP) channel index
1.3.6.1.4.1.21529.3.2.4.5.8.1.1.1Integer32 (1..4)not-accessiblecurrent
aoipUdpInputDataEventChannel
OBJECT-TYPE
Audio over IP (UDP) channel
1.3.6.1.4.1.21529.3.2.4.5.8.1.1.2INTEGER {channel1(1), channel2(2), channel3(3), channel4(4)}read-onlycurrent
aoipUdpInputDataEventT1
OBJECT-TYPE
The time period for which the status must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.8.1.1.3Integer32read-writecurrent
aoipUdpInputDataEventT2
OBJECT-TYPE
The time period for which the status must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.8.1.1.4Integer32read-writecurrent
aoipUdpInputDataEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.8.1.1.5TruthValueread-writecurrent
aoipIcecastInputDataEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.9
aoipIcecastInputDataEventTable
OBJECT-TYPE
Settings for the different Audio over IP (Icecast) server alarms
1.3.6.1.4.1.21529.3.2.4.5.9.1not-accessiblecurrent
aoipIcecastInputDataEventEntry
OBJECT-TYPE
Settings for one Audio over IP (Icecast) server alarm
1.3.6.1.4.1.21529.3.2.4.5.9.1.1not-accessiblecurrent
aoipIcecastInputDataEventIndex
OBJECT-TYPE
Audio over IP (Icecast) server index
1.3.6.1.4.1.21529.3.2.4.5.9.1.1.1Integer32 (1..4)not-accessiblecurrent
aoipIcecastInputDataEventServer
OBJECT-TYPE
Audio over IP (Icecast) server
1.3.6.1.4.1.21529.3.2.4.5.9.1.1.2INTEGER {server1(1), server2(2), server3(3), server4(4)}read-onlycurrent
aoipIcecastInputDataEventT1
OBJECT-TYPE
The time period for which the status must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.9.1.1.3Integer32read-writecurrent
aoipIcecastInputDataEventT2
OBJECT-TYPE
The time period for which the status must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.9.1.1.4Integer32read-writecurrent
aoipIcecastInputDataEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.9.1.1.5TruthValueread-writecurrent
audioEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.10
audioEventTable
OBJECT-TYPE
Settings for the different audio alarms (presence/absence of audio data)
1.3.6.1.4.1.21529.3.2.4.5.10.1not-accessiblecurrent
audioEventEntry
OBJECT-TYPE
Settings for one audio alarm
1.3.6.1.4.1.21529.3.2.4.5.10.1.1not-accessiblecurrent
audioEventIndex
OBJECT-TYPE
Audio channel index
1.3.6.1.4.1.21529.3.2.4.5.10.1.1.1Integer32 (1..4)not-accessiblecurrent
audioEventChannel
OBJECT-TYPE
Audio channel
1.3.6.1.4.1.21529.3.2.4.5.10.1.1.2INTEGER {audio1(1), audio2(2), audio3(3), audio4(4)}read-onlycurrent
audioEventT1
OBJECT-TYPE
The time period for which the status must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.10.1.1.3Integer32read-writecurrent
audioEventT2
OBJECT-TYPE
The time period for which the status must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.10.1.1.4Integer32read-writecurrent
audioEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.10.1.1.5TruthValueread-writecurrent
audioLevelEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.11
audioLevelEventTable
OBJECT-TYPE
Settings for the different audio level alarms (silence detection)
1.3.6.1.4.1.21529.3.2.4.5.11.1not-accessiblecurrent
audioLevelEventEntry
OBJECT-TYPE
Settings for one audio level alarm
1.3.6.1.4.1.21529.3.2.4.5.11.1.1not-accessiblecurrent
audioLevelEventIndex
OBJECT-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.5.11.1.1.1Integer32 (1..4)not-accessiblecurrent
audioLevelEventChannel
OBJECT-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.5.11.1.1.2INTEGER {audio1(1), audio2(2), audio3(3), audio4(4)}read-onlycurrent
audioLevelEventMinValue
OBJECT-TYPE
Minimum audio level considered not to be silence
1.3.6.1.4.1.21529.3.2.4.5.11.1.1.3Integer32read-writecurrent
audioLevelEventT1
OBJECT-TYPE
The time period for which the value must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.11.1.1.4Integer32read-writecurrent
audioLevelEventT2
OBJECT-TYPE
The time period for which the value must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.11.1.1.5Integer32read-writecurrent
audioLevelEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.11.1.1.6TruthValueread-writecurrent
dteEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.12
dteEventTable
OBJECT-TYPE
Settings for the different DTE alarms (presence/absence of DTE data)
1.3.6.1.4.1.21529.3.2.4.5.12.1not-accessiblecurrent
dteEventEntry
OBJECT-TYPE
Settings for one DTE alarm
1.3.6.1.4.1.21529.3.2.4.5.12.1.1not-accessiblecurrent
dteEventIndex
OBJECT-TYPE
DTE port index
1.3.6.1.4.1.21529.3.2.4.5.12.1.1.1Integer32 (1..8)not-accessiblecurrent
dteEventPort
OBJECT-TYPE
DTE port
1.3.6.1.4.1.21529.3.2.4.5.12.1.1.2INTEGER {dte1(1), dte2(2), dte3(3), dte4(4), dte5(5), dte6(6), dte7(7), dte8(8)}read-onlycurrent
dteEventT1
OBJECT-TYPE
The time period for which the status must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.12.1.1.3Integer32read-writecurrent
dteEventT2
OBJECT-TYPE
The time period for which the status must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.12.1.1.4Integer32read-writecurrent
dteEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.12.1.1.5TruthValueread-writecurrent
internalStorageEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.13
internalStorageEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.13.1TruthValueread-writecurrent
caseTemperatureEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.14
caseTemperatureEventMaxValue
OBJECT-TYPE
Maximum case temperature value considered OK
1.3.6.1.4.1.21529.3.2.4.5.14.1Integer32read-writecurrent
caseTemperatureEventT1
OBJECT-TYPE
The time period for which the value must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.14.2Integer32read-writecurrent
caseTemperatureEventT2
OBJECT-TYPE
The time period for which the value must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.14.3Integer32read-writecurrent
caseTemperatureEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.14.4TruthValueread-writecurrent
sfnClockEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.18
sfnClockEventT1
OBJECT-TYPE
The time period for which the value must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.18.1Integer32read-writecurrent
sfnClockEventT2
OBJECT-TYPE
The time period for which the value must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.18.2Integer32read-writecurrent
sfnClockEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.18.3TruthValueread-writecurrent
ipPerEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.19
ipPerEventMode
OBJECT-TYPE
Selecting the stream to measure PER
1.3.6.1.4.1.21529.3.2.4.5.19.1INTEGER {combinedStream(1), mainStream(2), bothStreams(3)}read-writecurrent
ipPerEventValue
OBJECT-TYPE
IP PER value considered OK
1.3.6.1.4.1.21529.3.2.4.5.19.2FloatStringread-writecurrent
ipPerEventT1
OBJECT-TYPE
The time period for which the value must be faulty before the alarm will get triggered
1.3.6.1.4.1.21529.3.2.4.5.19.3Integer32read-writecurrent
ipPerEventT2
OBJECT-TYPE
The time period for which the value must be OK before the alarm will be retracted
1.3.6.1.4.1.21529.3.2.4.5.19.4Integer32read-writecurrent
ipPerEventEnabled
OBJECT-TYPE
Enable the monitoring for this parameter
1.3.6.1.4.1.21529.3.2.4.5.19.5TruthValueread-writecurrent
generalEventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.5.90
flexDSR04EventTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.5.90.1not-accessiblecurrent
flexDSR04EventEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.5.90.1.1not-accessiblecurrent
flexDSR04EventIndex
OBJECT-TYPE
Index of event entry
1.3.6.1.4.1.21529.3.2.4.5.90.1.1.1Integer32 (1..19)not-accessiblecurrent
flexDSR04EventType
OBJECT-TYPE
event type
1.3.6.1.4.1.21529.3.2.4.5.90.1.1.2INTEGER {tunerRfPowerEvent(1), tunerCnEvent(2), tunerBerEvent(3), tunerTsSyncEvent(4), asiTsSyncEvent(5), ipTsSyncEvent(6), aoipUdpInputDataEvent(8), aoipIcecastInputDataEvent(9), audioEvent(10), audioLevelEvent(11), dteEvent(12), internalStorageEvent(13), caseTemperatureEvent(14), inputSourceEvent(15), remoteControlUploadEvent(16), optoInputEvent(17), sfnClockEvent(18), ipPerEvent(19)}read-onlycurrent
flexDSR04EventPriority
OBJECT-TYPE
Priority of the event
1.3.6.1.4.1.21529.3.2.4.5.90.1.1.3Integer32 (0..255)read-writecurrent
flexDSR04EventEnabled
OBJECT-TYPE
Enable/disable sending of the events to the specified trap destination(s)
1.3.6.1.4.1.21529.3.2.4.5.90.1.1.4TruthValueread-writecurrent
allEventsEnable
OBJECT-TYPE
Enable/disable signaling of all events
1.3.6.1.4.1.21529.3.2.4.5.99TruthValueread-writecurrent
control
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.6
networkSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.6.1
tcpIp
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.6.1.1
hostname
OBJECT-TYPE
Host name
1.3.6.1.4.1.21529.3.2.4.6.1.1.1OCTET STRING (SIZE(0..64))read-writecurrent
ip
OBJECT-TYPE
Device IP address
1.3.6.1.4.1.21529.3.2.4.6.1.1.2IpAddressread-onlycurrent
subnetmask
OBJECT-TYPE
Subnet mask
1.3.6.1.4.1.21529.3.2.4.6.1.1.3IpAddressread-onlycurrent
gateway
OBJECT-TYPE
IP address of the gateway
1.3.6.1.4.1.21529.3.2.4.6.1.1.4IpAddressread-onlycurrent
primaryDns
OBJECT-TYPE
IP address of primary DNS
1.3.6.1.4.1.21529.3.2.4.6.1.1.5IpAddressread-onlycurrent
secondaryDns
OBJECT-TYPE
IP address of secondary DNS
1.3.6.1.4.1.21529.3.2.4.6.1.1.6IpAddressread-onlycurrent
snmpSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.6.1.2
snmpTrapIP1
OBJECT-TYPE
IP address of first SNMP manager
1.3.6.1.4.1.21529.3.2.4.6.1.2.1IpAddressread-writecurrent
snmpTrapIP2
OBJECT-TYPE
IP address of second SNMP manager
1.3.6.1.4.1.21529.3.2.4.6.1.2.2IpAddressread-writecurrent
snmpTrapIP1Enable
OBJECT-TYPE
Enable/disable sending of events to first SNMP manager
1.3.6.1.4.1.21529.3.2.4.6.1.2.3TruthValueread-writecurrent
snmpTrapIP2Enable
OBJECT-TYPE
Enable/disable sending of events to second SNMP manager
1.3.6.1.4.1.21529.3.2.4.6.1.2.4TruthValueread-writecurrent
sntpSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.6.1.3
sntpFirstServerIP
OBJECT-TYPE
IP address of first SNTP server
1.3.6.1.4.1.21529.3.2.4.6.1.3.1IpAddressread-writecurrent
sntpSecondServerIP
OBJECT-TYPE
IP address of second SNTP server
1.3.6.1.4.1.21529.3.2.4.6.1.3.2IpAddressread-writecurrent
sntpUpdateInterval
OBJECT-TYPE
SNTP update interval
1.3.6.1.4.1.21529.3.2.4.6.1.3.3Integer32read-writecurrent
sntpTimeOffset
OBJECT-TYPE
Local time offset
1.3.6.1.4.1.21529.3.2.4.6.1.3.4Integer32 (-12..12)read-writecurrent
sntpUpdateEnable
OBJECT-TYPE
Enable/disable real time clock update via SNTP
1.3.6.1.4.1.21529.3.2.4.6.1.3.5TruthValueread-writecurrent
httpSettings
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.6.1.4
httpPort
OBJECT-TYPE
HTTP port
1.3.6.1.4.1.21529.3.2.4.6.1.4.1Integer32read-writecurrent
commands
OBJECT-IDENTITY
1.3.6.1.4.1.21529.3.2.4.6.10
reStartDevice
OBJECT-TYPE
Set to 1 to perform a restart of the device (will internally be reset to 0)
1.3.6.1.4.1.21529.3.2.4.6.10.1Integer32 (0..1)read-writecurrent
asciiCommand
OBJECT-TYPE
Set a new ASCII command e.g. 'AUDIO1_F0CP 100'
1.3.6.1.4.1.21529.3.2.4.6.10.2OCTET STRINGread-writecurrent

Notifications

NameOIDStatus
tunerRfPowerEvent
NOTIFICATION-TYPE
Signals the status of the SAT tuner RF power
1.3.6.1.4.1.21529.3.2.4.0.1current
tunerCnEvent
NOTIFICATION-TYPE
Signals the status of the SAT tuner C/N value
1.3.6.1.4.1.21529.3.2.4.0.2current
tunerBerEvent
NOTIFICATION-TYPE
Signals the status of the SAT tuner Viterbi/LDPC value
1.3.6.1.4.1.21529.3.2.4.0.3current
tunerTsSyncEvent
NOTIFICATION-TYPE
Signals the SYNC status of the TS received via the SAT tuner
1.3.6.1.4.1.21529.3.2.4.0.4current
asiTsSyncEvent
NOTIFICATION-TYPE
Signals the SYNC status of the TS received via the ASI input
1.3.6.1.4.1.21529.3.2.4.0.5current
ipTsSyncEvent
NOTIFICATION-TYPE
Signals the SYNC status of the TS received via the IP 1000Base-T interface
1.3.6.1.4.1.21529.3.2.4.0.6current
etr290ConformityEvent
NOTIFICATION-TYPE
Signals the ETR 290 conformity of the currently active TS
1.3.6.1.4.1.21529.3.2.4.0.7obsolete
aoipUdpInputDataEvent
NOTIFICATION-TYPE
Signals the input data status for Audio over IP (UDP)
1.3.6.1.4.1.21529.3.2.4.0.8current
aoipIcecastInputDataEvent
NOTIFICATION-TYPE
Signals the input data status for Audio over IP (Icecast)
1.3.6.1.4.1.21529.3.2.4.0.9current
audioEvent
NOTIFICATION-TYPE
Signals the audio data status (presence/absence of audio data)
1.3.6.1.4.1.21529.3.2.4.0.10current
audioLevelEvent
NOTIFICATION-TYPE
Signals the status of the audio level (silence detection)
1.3.6.1.4.1.21529.3.2.4.0.11current
dteEvent
NOTIFICATION-TYPE
Signals the status of the DTE (ancillary) data
1.3.6.1.4.1.21529.3.2.4.0.12current
internalStorageEvent
NOTIFICATION-TYPE
Signals the status of the internal storage
1.3.6.1.4.1.21529.3.2.4.0.13current
caseTemperatureEvent
NOTIFICATION-TYPE
Signals the case temperature status
1.3.6.1.4.1.21529.3.2.4.0.14current
inputSourceEvent
NOTIFICATION-TYPE
Signals the current input source for the different outputs
1.3.6.1.4.1.21529.3.2.4.0.15current
remoteControlUploadEvent
NOTIFICATION-TYPE
Description.
1.3.6.1.4.1.21529.3.2.4.0.16current
optoInputEvent
NOTIFICATION-TYPE
Signals changes in optical coupler input state
1.3.6.1.4.1.21529.3.2.4.0.17current
sfnClockEvent
NOTIFICATION-TYPE
Signals changes in sfn clock state (first error (1PPS/10MHz) or no error)
1.3.6.1.4.1.21529.3.2.4.0.18current
ipPerEvent
NOTIFICATION-TYPE
Signals the status of the IP PER value
1.3.6.1.4.1.21529.3.2.4.0.19current