FD-SYSTEM-MIB
- Registered at
- 1.3.6.1.4.1.34592.1.3.1
- Last updated
- 2016-08-08 13:48
- Organization
- epon eoc factory.
- Namespace
- cdata
- Source file
FD-SYSTEM-MIB- Digest
sha256:88a173f21fe9d9a0e03e3d25f4dc3cd15d324b49c2cbaf0ac74c98a3bd3823fa
Description
system mib module
Imports
| From | Symbols |
|---|---|
| EPON-EOC-MIB | DeviceOperation, DeviceStatus, DeviceType, LedStatus, epon |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION |
Imported by
4 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EPON-EOC-MIB FD-SYSTEM-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.34592.1.3.1.1 | eponObjects |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| sysBaseInfo OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.1 | |||
| sysModel OBJECT-TYPE OLT platform system model | 1.3.6.1.4.1.34592.1.3.1.1.1 | DeviceType | read-only | current |
| sysDesc OBJECT-TYPE Used for system manager to give a brief system description information | 1.3.6.1.4.1.34592.1.3.1.1.2 | DisplayString | read-write | current |
| sysLocation OBJECT-TYPE Used for system manager to input the device(olt platform) location information | 1.3.6.1.4.1.34592.1.3.1.1.3 | DisplayString | read-write | current |
| sysContact OBJECT-TYPE system manager contact information | 1.3.6.1.4.1.34592.1.3.1.1.4 | DisplayString | read-write | current |
| sysMajAlarmLed OBJECT-TYPE Status of main card MAJ led | 1.3.6.1.4.1.34592.1.3.1.1.5 | LedStatus | read-only | current |
| sysCriAlarmLed OBJECT-TYPE Status of main card CRJ led | 1.3.6.1.4.1.34592.1.3.1.1.6 | LedStatus | read-only | current |
| sysAlarmDesc OBJECT-TYPE Meaning of MAJ and CRI alarm leds. Normally, you can get alarm meaning from this object when one of or both the MAJ and CRI alarm leds are lip | 1.3.6.1.4.1.34592.1.3.1.1.7 | DisplayString | read-only | current |
| sysCpuUtilization OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.1.8 | Integer32 (0..100) | read-only | current |
| sysMTU OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.1.9 | Integer32 (1518..2047) | read-write | current |
| sysConfig OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.2 | |||
| consolePortSpd OBJECT-TYPE Main card CONSOLE port access speed | 1.3.6.1.4.1.34592.1.3.1.2.1 | INTEGER {bps2400(1), bps4800(2), bps9600(3), bps19200(4), bps38400(5), bps57600(6), bps115200(7)} | read-only | current |
| manageIpAddr OBJECT-TYPE The IP Address of outband network management port | 1.3.6.1.4.1.34592.1.3.1.2.2 | IpAddress | read-write | current |
| manageNetMask OBJECT-TYPE The network mask of outband network management port | 1.3.6.1.4.1.34592.1.3.1.2.3 | IpAddress | read-write | current |
| manageGateway OBJECT-TYPE The Default Gateway Address of outband network management port | 1.3.6.1.4.1.34592.1.3.1.2.4 | IpAddress | read-write | current |
| snmpReadCommunity OBJECT-TYPE The read-only community used on the embedded snmp agent | 1.3.6.1.4.1.34592.1.3.1.2.5 | DisplayString | read-write | current |
| snmpRWCommunity OBJECT-TYPE The read-write community used on the embedded snmp agent | 1.3.6.1.4.1.34592.1.3.1.2.6 | DisplayString | read-write | current |
| trapDstIpAddr1 OBJECT-TYPE The first destination IP Address to which the system trap will send | 1.3.6.1.4.1.34592.1.3.1.2.8 | IpAddress | read-write | current |
| trapDstIpAddr2 OBJECT-TYPE The second destination IP Address to which the system trap will send | 1.3.6.1.4.1.34592.1.3.1.2.9 | IpAddress | read-write | current |
| trapDstIpAddr3 OBJECT-TYPE The third destination IP Address to which the system trap will send | 1.3.6.1.4.1.34592.1.3.1.2.10 | IpAddress | read-write | current |
| trapDstIpAddr4 OBJECT-TYPE The fourth destination IP Address to which the system trap will send | 1.3.6.1.4.1.34592.1.3.1.2.11 | IpAddress | read-write | current |
| sysOperate OBJECT-TYPE Set the value of this object to 'save(1)' to save all system configurations. Return 'noOperation(2)' when read. Set the value to 'noOperation(2)'will take nothing effect | 1.3.6.1.4.1.34592.1.3.1.2.12 | DeviceOperation | read-write | current |
| outbandIpAddr OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.13 | IpAddress | read-write | current |
| outbandNetMask OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.14 | IpAddress | read-write | current |
| sysConfigurations OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.2.15 | |||
| cfgAutoBackup OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.2.15.1 | |||
| sysAutoBackupEnable OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.15.1.1 | INTEGER {disable(0), enable(1)} | read-write | current |
| sysAutoBackupType OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.15.1.2 | INTEGER {olt(1), onu(2), all(3)} | read-write | current |
| sysAutoBackupInterval OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.15.1.3 | INTEGER (1..365) | read-write | current |
| sysAutoBackupServer OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.15.1.4 | IpAddress | read-write | current |
| cfgBackup OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.2.15.2 | |||
| sysCfgBackupType OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.15.2.1 | INTEGER {olt(1), onu(2)} | read-write | current |
| sysCfgBackupServer OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.15.2.2 | IpAddress | read-write | current |
| cfgRestore OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.2.15.3 | |||
| sysCfgRestoreType OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.15.3.1 | INTEGER {olt(1), onu(2)} | read-write | current |
| sysCfgRestoreServer OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.15.3.2 | IpAddress | read-write | current |
| sysCfgRestoreFilename OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.15.3.3 | DisplayString | read-write | current |
| sysLog OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.2.16 | |||
| sysLogLevel OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.16.1 | Integer32 | read-write | current |
| sysLogTable OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.16.2 | not-accessible | current | |
| sysLogEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.16.2.1 | not-accessible | current | |
| sysLogEntryIndex OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.16.2.1.1 | INTEGER {onuOnOffLine(1), onuDyingGaspAlarm(2), onuUniLoopBackAlarm(3), all(127)} | not-accessible | current |
| sysLogEntryEnable OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.2.16.2.1.2 | INTEGER {disable(0), enable(1)} | read-write | current |
| date OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.2.17 | |||
| chassisInfo OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.3 | |||
| chassisType OBJECT-TYPE type of the olt platform chassis | 1.3.6.1.4.1.34592.1.3.1.3.1 | DeviceType | read-only | current |
| chassisFactorySerial OBJECT-TYPE Description. Chassis factory serial,reserved for future use. | 1.3.6.1.4.1.34592.1.3.1.3.2 | OCTET STRING (SIZE(0..30)) | read-only | current |
| chassisRevision OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.3.3 | DisplayString | read-only | current |
| chassisTemperature OBJECT-TYPE chassis temperature | 1.3.6.1.4.1.34592.1.3.1.3.4 | Unsigned32 | read-only | current |
| powerStatusBit OBJECT-TYPE Power status bit masks; value & 1 == 1 indicating power A on else off value & 2 == 2 indicating power B on else off | 1.3.6.1.4.1.34592.1.3.1.3.5 | Unsigned32 | read-only | current |
| fanStatusBit OBJECT-TYPE Fan stauts bit masks value & 1 == 1 indicating fan 1 on else off value & 2 == 2 indicating fan 2 on else off value & 4 == 4 indicating fan 3 on else off value & 8 == 8 indicating fan 4 on else off | 1.3.6.1.4.1.34592.1.3.1.3.6 | Unsigned32 | read-only | current |
| cardModule OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.5 | |||
| mainCard OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.5.1 | |||
| mainCardType OBJECT-TYPE type of main card (it is also called control and switch card) | 1.3.6.1.4.1.34592.1.3.1.5.1.1 | DeviceType | read-only | current |
| mainCardFactorySerial OBJECT-TYPE Description. Main card factory serial, reserved for future use | 1.3.6.1.4.1.34592.1.3.1.5.1.2 | OCTET STRING (SIZE(0..30)) | read-only | current |
| mainCardHWRevision OBJECT-TYPE main card hardware revision | 1.3.6.1.4.1.34592.1.3.1.5.1.3 | DisplayString | read-only | current |
| mainCardSWVersion OBJECT-TYPE software version running on main card | 1.3.6.1.4.1.34592.1.3.1.5.1.4 | DisplayString | read-only | current |
| mainCardRunningStatus OBJECT-TYPE The running status of main card, it can only be normal or abnormal, since the main card is always online | 1.3.6.1.4.1.34592.1.3.1.5.1.5 | DeviceStatus | read-only | current |
| mainCardRunningTime OBJECT-TYPE The running time since the main card was last powered | 1.3.6.1.4.1.34592.1.3.1.5.1.6 | TimeTicks | read-only | current |
| mainCardOperate OBJECT-TYPE The operation collection, such as reset, restore... | 1.3.6.1.4.1.34592.1.3.1.5.1.7 | DeviceOperation | read-write | current |
| ponCard OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.5.2 | |||
| ponCardTable OBJECT-TYPE This table defines base para objects of PON cards installed in the chassis | 1.3.6.1.4.1.34592.1.3.1.5.2.1 | not-accessible | current | |
| ponCardEntry OBJECT-TYPE Each entry defines a sole PON card objects | 1.3.6.1.4.1.34592.1.3.1.5.2.1.1 | not-accessible | current | |
| ponCardSlotId OBJECT-TYPE PON card slot index, defined begin from 1 to max slot number | 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.1 | Integer32 (1..4) | not-accessible | current |
| ponCardType OBJECT-TYPE PON card type value | 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.2 | DeviceType | read-only | current |
| ponCardFactorySerial OBJECT-TYPE Description. PON card factory serial, reserved for future use | 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.3 | OCTET STRING (SIZE(0..30)) | read-only | current |
| ponCardHwRev OBJECT-TYPE PON card hardware revision | 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.4 | DisplayString | read-only | current |
| ponCardFwVer OBJECT-TYPE PON card software version | 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.5 | DisplayString | read-only | current |
| ponCardRunningStatus OBJECT-TYPE pon card on-line status, each pon card may have following status: not installed (present) installed but can not be connected by main card installed and can be connected by main card | 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.7 | DeviceStatus | read-only | current |
| ponCardRuningTime OBJECT-TYPE The running time since the pon card last powered | 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.8 | TimeTicks | read-only | current |
| ponCardOperate OBJECT-TYPE Operate action taken on PON card | 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.9 | DeviceOperation | read-write | current |
| ponCardUpgradeStat OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.5.2.1.1.10 | INTEGER {booting(1), normalRun(2), rcvFileIng(3), rcvFileOk(4), rcvFileErr(5), upgrading(6), upgradeOk(7), upgradeErr(8), upgradeOlt(9), upgradeOnu(10)} | read-only | current |
| onuAuth OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.6 | |||
| authMethod OBJECT-TYPE Which method that the manager will take to authenticate accessed ONUs, When set to blackList, the OLT will allow only the ONUs that their MAC is not included in the black MAC table. When set to whiteList,the OLT will allow only the ONUs that their MAC is included in the white MAC table. | 1.3.6.1.4.1.34592.1.3.1.6.1 | INTEGER {blackList(1), whiteList(2), none(3)} | read-write | current |
| nonAuthOper OBJECT-TYPE ONU MAC Authentication operation object, now, it can only be used to clear the MAC list which had tried to register but had not been authenticated | 1.3.6.1.4.1.34592.1.3.1.6.2 | INTEGER {clearNonAuthMacList(2)} | read-write | current |
| onuAuthMacCfgTable OBJECT-TYPE MAC list table which contain the ONU MAC address list, these MAC address will be used to authenticate accessed ONUs. | 1.3.6.1.4.1.34592.1.3.1.6.3 | not-accessible | current | |
| onuAuthMacCfgEntry OBJECT-TYPE Each entry in this table defines a sole MAC (when the beginMAC is equal to the endMAC or the endMAC is blank/zero) or a MAC range. | 1.3.6.1.4.1.34592.1.3.1.6.3.1 | not-accessible | current | |
| authMacEntryId OBJECT-TYPE Description. entry serial ID, which used to identify an entry uniquely | 1.3.6.1.4.1.34592.1.3.1.6.3.1.1 | Unsigned32 (1..65536) | not-accessible | current |
| beginMacAddr OBJECT-TYPE begin MAC address, this object must be set to effect this entry | 1.3.6.1.4.1.34592.1.3.1.6.3.1.2 | MacAddress | read-create | current |
| endMacAddr OBJECT-TYPE End MAC address of a MAC range entry. Set this value to zero will result that this entry only indicate a unique MAC. | 1.3.6.1.4.1.34592.1.3.1.6.3.1.3 | MacAddress | read-create | current |
| macAttr OBJECT-TYPE This object is used to decide that the MAC(s) introduced in this entry should be classified into blackList or whiteList. When set to 'obsolete', this entry is not in use. This option is reserved for future use. | 1.3.6.1.4.1.34592.1.3.1.6.3.1.4 | INTEGER {blackMac(1), whiteMac(2), obsolete(3)} | read-create | current |
| onuAuthMacRowStatus OBJECT-TYPE This object is used to create or delete a MAC entry | 1.3.6.1.4.1.34592.1.3.1.6.3.1.5 | RowStatus | read-create | current |
| nonAuthOnuListTable OBJECT-TYPE This table contain illegal ONU MAC list which try to register on OLT | 1.3.6.1.4.1.34592.1.3.1.6.4 | not-accessible | current | |
| nonAuthOnuListEntry OBJECT-TYPE Each entry in this table contain a nonAuth onu MAC info | 1.3.6.1.4.1.34592.1.3.1.6.4.1 | not-accessible | current | |
| nonAuthOnuMacIndex OBJECT-TYPE Administrativly assigned entry index | 1.3.6.1.4.1.34592.1.3.1.6.4.1.1 | Unsigned32 (1..65536) | not-accessible | current |
| nonAuthOnuMac OBJECT-TYPE The MAC address which tried to register | 1.3.6.1.4.1.34592.1.3.1.6.4.1.2 | MacAddress | read-only | current |
| nonAuthOnuTries OBJECT-TYPE The times that the illegal ONU try to register | 1.3.6.1.4.1.34592.1.3.1.6.4.1.3 | Unsigned32 | read-only | current |
| oltId OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.6.4.1.4 | Integer32 (1..48) | read-only | current |
| authMethodV2 OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.6.5 | INTEGER {disable(0), mac(1), loid(2), hybrid(3), blacklist(4), whitelist(5)} | read-write | current |
| onuAuthBlacklistMacCfgTable OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.6.6 | not-accessible | current | |
| onuAuthBlacklistMacCfgEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.6.6.1 | not-accessible | current | |
| authBlacklistMacEntryId OBJECT-TYPE index of ONU mac in blacklist. | 1.3.6.1.4.1.34592.1.3.1.6.6.1.1 | Unsigned32 (1..256) | not-accessible | current |
| onuAuthBlacklistMacAddr OBJECT-TYPE ONU mac in blacklist. | 1.3.6.1.4.1.34592.1.3.1.6.6.1.2 | MacAddress | read-create | current |
| onuAuthBlacklistMacCfgRowStatus OBJECT-TYPE This object is used to create or delete a blacklist MAC entry | 1.3.6.1.4.1.34592.1.3.1.6.6.1.3 | RowStatus | read-create | current |
| onuAuthWhitelistMacCfgTable OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.6.7 | not-accessible | current | |
| onuAuthWhitelistMacCfgEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.6.7.1 | not-accessible | current | |
| authWhitelistMacEntryId OBJECT-TYPE index of ONU mac in whitelist. | 1.3.6.1.4.1.34592.1.3.1.6.7.1.1 | Unsigned32 (1..1024) | not-accessible | current |
| onuAuthWhitelistMacAddr OBJECT-TYPE ONU mac in whitelist. | 1.3.6.1.4.1.34592.1.3.1.6.7.1.2 | MacAddress | read-create | current |
| onuAuthWhitelistMacCfgRowStatus OBJECT-TYPE This object is used to create or delete a whitelist MAC entry | 1.3.6.1.4.1.34592.1.3.1.6.7.1.3 | RowStatus | read-create | current |
| onuAuthLoidCfgTable OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.6.8 | not-accessible | current | |
| onuAuthLoidCfgEntry OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.6.8.1 | not-accessible | current | |
| authLoidEntryId OBJECT-TYPE index of ONU loid in table. | 1.3.6.1.4.1.34592.1.3.1.6.8.1.1 | Unsigned32 (1..512) | not-accessible | current |
| onuAuthLoidStrings OBJECT-TYPE CTC loid, max 24 Chars. | 1.3.6.1.4.1.34592.1.3.1.6.8.1.2 | DisplayString | read-create | current |
| onuAuthPasswordStrings OBJECT-TYPE CTC loid password, max 12 Chars | 1.3.6.1.4.1.34592.1.3.1.6.8.1.3 | DisplayString | read-create | current |
| onuAuthLoidCfgRowStatus OBJECT-TYPE This object is used to create or delete a loid entry | 1.3.6.1.4.1.34592.1.3.1.6.8.1.4 | RowStatus | read-create | current |
| userManage OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.7 | |||
| userManageTable OBJECT-TYPE Description. Access user management table. The table defined the users who can access the system shell management interface, including local CLI and remote telnet access. The users defined in this table is independent with those defined in EMS. | 1.3.6.1.4.1.34592.1.3.1.7.1 | not-accessible | current | |
| userManageEntry OBJECT-TYPE Description. One entry contains one user attributes, up to 5 entries can be created in this table. | 1.3.6.1.4.1.34592.1.3.1.7.1.1 | not-accessible | current | |
| userId OBJECT-TYPE Administrativly assigned entry index | 1.3.6.1.4.1.34592.1.3.1.7.1.1.1 | Integer32 (1..10) | not-accessible | current |
| userName OBJECT-TYPE user name | 1.3.6.1.4.1.34592.1.3.1.7.1.1.2 | DisplayString | read-create | current |
| userPassword OBJECT-TYPE user password | 1.3.6.1.4.1.34592.1.3.1.7.1.1.3 | OCTET STRING (SIZE(0..32)) | read-create | current |
| userPermission OBJECT-TYPE Description. This object define the user priority and other permission attributes | 1.3.6.1.4.1.34592.1.3.1.7.1.1.4 | Unsigned32 | read-only | current |
| userAccessDeviceMap OBJECT-TYPE This object is defined for future use. It is a bit map value which defines which devices in the system can be accessed by a user. Temporary definitions: ---------------------------------------------- |sys level | swithch module | olt module| onu |............ ---------------------------------------------- high 2b 2b 5b 7b reserved low when the map bit set to 1, the user can access the corresponding device otherwise can not | 1.3.6.1.4.1.34592.1.3.1.7.1.1.5 | Unsigned32 | read-create | current |
| loginTimeout OBJECT-TYPE Description. Time out time since one accessed user last operation, when this time elapse, the user will be kicked off | 1.3.6.1.4.1.34592.1.3.1.7.1.1.6 | Unsigned32 | read-only | current |
| userEntryRowStatus OBJECT-TYPE Use this object to create or delete a user info | 1.3.6.1.4.1.34592.1.3.1.7.1.1.7 | RowStatus | read-create | current |
| upgrade OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.8 | |||
| ftpServerIp OBJECT-TYPE The host IP Address on which FTP server running and this host will be used as the server to do FTP operation | 1.3.6.1.4.1.34592.1.3.1.8.1 | DisplayString (SIZE(0..63)) | read-write | current |
| ftpServerUserName OBJECT-TYPE The user name used to access ftp server | 1.3.6.1.4.1.34592.1.3.1.8.2 | DisplayString (SIZE(0..63)) | read-write | current |
| ftpServerUserPasswd OBJECT-TYPE The user password which will be used to access ftp server | 1.3.6.1.4.1.34592.1.3.1.8.3 | DisplayString (SIZE(0..63)) | read-write | current |
| ftpOperFileName OBJECT-TYPE The file name which will be download to or upload from device. When the operation is download, the operation file should located on the host; When the operation is upload the file should located on the target device; | 1.3.6.1.4.1.34592.1.3.1.8.4 | DisplayString (SIZE(0..63)) | read-write | current |
| ftpOperTarget OBJECT-TYPE The operate target, which are device firmware or configuration file. When do upgrade or download,one of these file targets should be selected to operate. ctrlCardImage(1), ponCardImage(2), oltApp(3), oltPers(4), oltBoot(5), onuApp(6), onuPers(7), onuBoot(8), otherSpecifiedFile(9) | 1.3.6.1.4.1.34592.1.3.1.8.6 | INTEGER {ctrlCardImage(1), ponCardImage(2), oltApp(3), oltPers(4), oltBoot(5), onuApp(6), onuPers(7), onuBoot(8), otherSpecifiedFile(9)} | read-write | current |
| dwLoadFileCrcCheck OBJECT-TYPE This object is used to indicate the target device should or not to do crc check operation,if 'checkCrc' the operator should give the download file's crc calculate result on the 'dwLoadFileCrcValue' object. Crc check is now only useful when do download operation. | 1.3.6.1.4.1.34592.1.3.1.8.7 | INTEGER {checkCrc(1), dontCheckCrc(2)} | read-write | current |
| dwLoadFileCrcValue OBJECT-TYPE CRC value of the download file, this value will be used to compare with the CRC result calculated by the firmware running on device to check if error occurred during file transmission | 1.3.6.1.4.1.34592.1.3.1.8.8 | Unsigned32 | read-write | current |
| operDeviceMap OBJECT-TYPE This object defines the upgrade or download device objects,when do upgrade operation one or more device can be selected as operate objects. The data format defined as following: --------------------------------- | slot | olt | onu | --------------------------------- 1byte 1byte 8byte All these 10 bytes used as bit map for device selecting, when selected set the according bit to 1, else set to 0 The bit sequence in each used from low to high: For example: slot:0000 0101, select slot 1 and 3, dont select slot 2 and 4 and others(reserved) olt: 0000 0011 select olt(pon port) 1 and 2, dont select others(reserved) onu: byte[0] map to onuId 1~8; byte[1] map to onuId 9~16,..., byte[7] map to onuId 56~63 Bit map in byte[0]: b0~b7 map to onuId1~onuId8, etc. | 1.3.6.1.4.1.34592.1.3.1.8.9 | OCTET STRING (SIZE(10)) | read-write | current |
| upgradeStatus OBJECT-TYPE Upgrade process status | 1.3.6.1.4.1.34592.1.3.1.8.10 | INTEGER {paraErr(1), initFtpErr(2), transmitting(3), transmitErr(4), transmitOk(5), upgrading(6), upgradeErr(7), upgradeOk(8), uploading(9), uploadErr(10), uploadOk(11)} | read-only | current |
| upgradeOperation OBJECT-TYPE This object defines an operation collection, which are used to do downlaod,upgrade or get file(upload) operations. | 1.3.6.1.4.1.34592.1.3.1.8.11 | INTEGER {downloadFile(1), upgrade(2), reboot(3), uploadFile(4)} | read-write | current |
| ftpProgress OBJECT-TYPE Description. | 1.3.6.1.4.1.34592.1.3.1.8.12 | Integer32 | read-only | current |
| fdSysConformance OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.13 | |||
| fdSystemGroups OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.13.1 | |||
| fdSystemCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.34592.1.3.1.13.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| sysBaseManageGroup OBJECT-GROUP A collection of objects providing fd system basic features management | 1.3.6.1.4.1.34592.1.3.1.13.1.1 | current |
| chassisInfoGroup OBJECT-GROUP A collection of objects providing chassis information management | 1.3.6.1.4.1.34592.1.3.1.13.1.2 | current |
| cardModuleGroup OBJECT-GROUP A collection of objects providing installed card module basic features management | 1.3.6.1.4.1.34592.1.3.1.13.1.3 | current |
| onuAuthGroup OBJECT-GROUP A collection of objects providing ONU authentication MAC list management | 1.3.6.1.4.1.34592.1.3.1.13.1.4 | current |
| userManageGroup OBJECT-GROUP A collection of objects providing system user management | 1.3.6.1.4.1.34592.1.3.1.13.1.5 | current |
| systemUpgradeGroup OBJECT-GROUP A collection of objects providing system device upgrade management | 1.3.6.1.4.1.34592.1.3.1.13.1.6 | current |
| fdSystemCompliance MODULE-COMPLIANCE The compliance statement | 1.3.6.1.4.1.34592.1.3.1.13.2.1 | current |