FASTPATH-ROUTING6-MIB
- Last updated
- 2007-05-23 00:00
- Organization
- Broadcom Corporation
- Revisions
- 2007-05-23 00:00, 2005-09-21 17:00
- Namespace
- broadcom
- Source file
FASTPATH-ROUTING6-MIB- Digest
sha256:bde2929ad46549b222cc5c7f87f351d05097f3b34d893d621998af3ad2247e05
Description
The Broadcom Private MIB for FastPath Ipv6 Routing
Contact
Customer Support Postal: Broadcom Corporation 100, Perimeter Park Drive Morrisville, NC 27560 Tel: +1 919 865 2700
Imports
| From | Symbols |
|---|---|
| BROADCOM-REF-MIB | fastPath |
| IPV6-TC | Ipv6Address, Ipv6AddressIfIdentifier, Ipv6AddressPrefix, Ipv6IfIndex, Ipv6IfIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowPointer, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue, VariablePointer |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BROADCOM-REF-MIB FASTPATH-ROUTING6-MIB IPV6-TC SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| agentIpv6Group OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.30.1 | |||
| agentIpv6RoutingMode OBJECT-TYPE Administratively enables/disables ipv6 unicast routing on the switch. | 1.3.6.1.4.1.4413.1.1.30.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6InterfaceTable OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.30.1.2 | not-accessible | current | |
| agentIpv6InterfaceEntry OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.30.1.2.1 | not-accessible | current | |
| agentIpv6InterfaceIfIndex OBJECT-TYPE The IfIndex associated with this instance. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.1 | Integer32 (0..2147483647) | read-only | current |
| agentIpv6InterfaceMtuValue OBJECT-TYPE Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to this object effectively un-configures the MTU. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.2 | Unsigned32 (0 | 1280..1500) | read-write | current |
| agentIpv6InterfaceDadTransmits OBJECT-TYPE Configures the dad transmits value for this interface. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.3 | Integer32 (0..100) | read-write | current |
| agentIpv6InterfaceLinkLocalOnly OBJECT-TYPE When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.4 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6InterfaceIcmpUnreachables OBJECT-TYPE If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.5 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6RouterAdvertisementTable OBJECT-TYPE There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well. | 1.3.6.1.4.1.4413.1.1.30.1.3 | not-accessible | current | |
| agentIpv6RouterAdvertisementEntry OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.30.1.3.1 | not-accessible | current | |
| agentIpv6RouterAdvertisementIfIndex OBJECT-TYPE Interface Number to configure Router Advertisement on. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.1 | Integer32 (0..2147483647) | read-only | current |
| agentIpv6RouterAdvertisementSuppressMode OBJECT-TYPE Enable or disable router advertisement suppression on the interface. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6RouterAdvertisementMaxAdvertisementInterval OBJECT-TYPE Maximum time allowed between sending router advertisements from the interface. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.3 | Integer32 (4..1800) | read-write | current |
| agentIpv6RouterAdvertisementAdvertisementLifetime OBJECT-TYPE Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.4 | Integer32 (4..65520) | read-write | current |
| agentIpv6RouterAdvertisementNbrSolicitInterval OBJECT-TYPE Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.5 | Integer32 (0..3600000) | read-write | current |
| agentIpv6RouterAdvertisementReachableTime OBJECT-TYPE Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.6 | Integer32 (0..3600000) | read-write | current |
| agentIpv6RouterAdvertisementManagedFlag OBJECT-TYPE Value of managed config field of router advertisement sent from the interface. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.7 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6RouterAdvertisementOtherFlag OBJECT-TYPE Value of other config field of router advertisement sent from the interface. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.8 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6AddrPrefixTable OBJECT-TYPE The list of IPv6 address prefixes of IPv6 interfaces. | 1.3.6.1.4.1.4413.1.1.30.1.4 | not-accessible | current | |
| agentIpv6AddrPrefixEntry OBJECT-TYPE An interface entry containing objects of a particular IPv6 address prefix. | 1.3.6.1.4.1.4413.1.1.30.1.4.1 | not-accessible | current | |
| agentIpv6AddrPrefix OBJECT-TYPE The prefix associated with the this interface. | 1.3.6.1.4.1.4413.1.1.30.1.4.1.1 | Ipv6AddressPrefix | not-accessible | current |
| agentIpv6AddrPrefixLength OBJECT-TYPE The length of the prefix (in bits). | 1.3.6.1.4.1.4413.1.1.30.1.4.1.2 | INTEGER (0..128) | not-accessible | current |
| agentIpv6AddrPrefixOnLinkFlag OBJECT-TYPE This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise. | 1.3.6.1.4.1.4413.1.1.30.1.4.1.3 | TruthValue | read-write | current |
| agentIpv6AddrPrefixAutonomousFlag OBJECT-TYPE Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address. | 1.3.6.1.4.1.4413.1.1.30.1.4.1.4 | TruthValue | read-write | current |
| agentIpv6AddrPrefixAdvPreferredLifetime OBJECT-TYPE It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected. | 1.3.6.1.4.1.4413.1.1.30.1.4.1.5 | Unsigned32 | read-write | current |
| agentIpv6AddrPrefixAdvValidLifetime OBJECT-TYPE It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet. | 1.3.6.1.4.1.4413.1.1.30.1.4.1.6 | Unsigned32 | read-write | current |
| agentIpv6AddrTable OBJECT-TYPE The table of addressing information relevant to this node's interface addresses. | 1.3.6.1.4.1.4413.1.1.30.1.5 | not-accessible | current | |
| agentIpv6AddrEntry OBJECT-TYPE The addressing information for one of this node's interface addresses. | 1.3.6.1.4.1.4413.1.1.30.1.5.1 | not-accessible | current | |
| agentIpv6AddrAddress OBJECT-TYPE The IPv6 address to which this entry's addressing information pertains. | 1.3.6.1.4.1.4413.1.1.30.1.5.1.1 | Ipv6Address | not-accessible | current |
| agentIpv6AddrPfxLength OBJECT-TYPE The length of the prefix (in bits) associated with the IPv6 address of this entry. | 1.3.6.1.4.1.4413.1.1.30.1.5.1.2 | INTEGER (0..128) | read-create | current |
| agentIpv6AddrEui64Flag OBJECT-TYPE This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise. | 1.3.6.1.4.1.4413.1.1.30.1.5.1.3 | TruthValue | read-create | current |
| agentIpv6AddrStatus OBJECT-TYPE Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask object must be set during creation. destroy(6) - Removes the associated address from the interface. | 1.3.6.1.4.1.4413.1.1.30.1.5.1.4 | RowStatus | read-create | current |
| agentIpv6StaticRouteTable OBJECT-TYPE IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination. | 1.3.6.1.4.1.4413.1.1.30.1.6 | not-accessible | current | |
| agentIpv6StaticRouteEntry OBJECT-TYPE A routing entry. | 1.3.6.1.4.1.4413.1.1.30.1.6.1 | not-accessible | current | |
| agentIpv6StaticRouteDest OBJECT-TYPE The destination IPv6 address of this route. This object may not take a Multicast address value. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.1 | Ipv6AddressPrefix | not-accessible | current |
| agentIpv6StaticRoutePfxLength OBJECT-TYPE Indicates the prefix length of the destination address. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.2 | INTEGER (0..128) | not-accessible | current |
| agentIpv6StaticRouteIfIndex OBJECT-TYPE The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex. For routes with global address next hop this value can be zero. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.3 | Ipv6IfIndexOrZero | not-accessible | current |
| agentIpv6StaticRouteNextHop OBJECT-TYPE The address of the next system en route. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.4 | Ipv6Address | not-accessible | current |
| agentIpv6StaticRoutePreference OBJECT-TYPE The routing preference metric for this route. A lower value is more preferred. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.5 | INTEGER (1..255) | read-create | current |
| agentIpv6StaticRouteStatus OBJECT-TYPE Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the interface. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.6 | RowStatus | read-create | current |
| agentIpv6ServicePortGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.30.1.7 | |||
| agentIpv6ServicePortPrefixTable OBJECT-TYPE IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.1 | not-accessible | current | |
| agentIpv6ServicePortPrefixEntry OBJECT-TYPE An IPv6 Service Port Prefix entry. | 1.3.6.1.4.1.4413.1.1.30.1.7.1.1 | not-accessible | current | |
| agentIpv6ServicePortPrefixIndex OBJECT-TYPE The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned. | 1.3.6.1.4.1.4413.1.1.30.1.7.1.1.1 | Unsigned32 | not-accessible | current |
| agentIpv6ServicePortPrefix OBJECT-TYPE The Ipv6 Prefix Address configured on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.1.1.2 | Ipv6Address | read-only | current |
| agentIpv6ServicePortPrefixLength OBJECT-TYPE The length of the IPv6 Prefix Address. | 1.3.6.1.4.1.4413.1.1.30.1.7.1.1.3 | Unsigned32 | read-only | current |
| agentIpv6ServicePortDefaultRouterTable OBJECT-TYPE IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.2 | not-accessible | current | |
| agentIpv6ServicePortDefaultRouterEntry OBJECT-TYPE An IPv6 Service Port Default Router entry. | 1.3.6.1.4.1.4413.1.1.30.1.7.2.1 | not-accessible | current | |
| agentIpv6ServicePortDefaultRouterIndex OBJECT-TYPE The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned. | 1.3.6.1.4.1.4413.1.1.30.1.7.2.1.1 | Unsigned32 | not-accessible | current |
| agentIpv6ServicePortDefaultRouter OBJECT-TYPE The Address of the IPv6 Default Router configured on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.2.1.2 | Ipv6Address | read-only | current |
| agentIpv6ServicePortNbrTable OBJECT-TYPE IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.3 | not-accessible | current | |
| agentIpv6ServicePortNbrEntry OBJECT-TYPE An IPv6 Service Port Neighbor entry. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1 | not-accessible | current | |
| agentIpv6ServicePortNbrAddr OBJECT-TYPE The Ipv6 Address of a neighbor switch visible to the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.1 | Ipv6Address | not-accessible | current |
| agentIpv6ServicePortNbrPhysAddr OBJECT-TYPE The MacAddress of the neighboring switch. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.2 | MacAddress | read-only | current |
| agentIpv6ServicePortNbrState OBJECT-TYPE The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.3 | INTEGER {reachable(1), stale(2), delay(3), probe(4), unknown(6)} | read-only | current |
| agentIpv6ServicePortNbrUpdated OBJECT-TYPE The last sysUpTime that this neighbor has been updated. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.4 | TimeStamp | read-only | current |
| agentIpv6ServicePortNbrIsRouter OBJECT-TYPE Returns true(1) if the neighbor machine is a router, false(2) otherwise. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.5 | TruthValue | read-only | current |
| agentIpv6IcmpControlGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.30.1.8 | |||
| agentIpv6IcmpRateLimitInterval OBJECT-TYPE Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit. | 1.3.6.1.4.1.4413.1.1.30.1.8.1 | Integer32 (0..2147483647) | read-write | current |
| agentIpv6IcmpRateLimitBurstSize OBJECT-TYPE Specifies the number of tokens to be placed after timeout. | 1.3.6.1.4.1.4413.1.1.30.1.8.2 | Integer32 (1..200) | read-write | current |