MIBs Depot

FASTPATH-ROUTING-MIB

Last updated
2007-05-23 00:00
Organization
Broadcom Corporation
Revisions
2007-05-23 00:00, 2003-11-21 00:00, 2003-04-02 17:00
Namespace
broadcom
Source file
FASTPATH-ROUTING-MIB
Digest
sha256:f68f96bfe0887cb7b0ed50fe402932ab334f8b26daa53cd6a8177e437361142f

Description

The Broadcom Private MIB for FastPath Routing

Contact

Customer Support Postal: Broadcom Corporation 100, Perimeter Park Drive Morrisville, NC 27560 Tel: +1 919 865 2700

Imports

FromSymbols
BROADCOM-REF-MIBfastPath
IF-MIBInterfaceIndex, InterfaceIndexOrZero, ifIndex
OSPF-MIBRouterID, ospfAreaEntry, ospfIfEntry, ospfVirtIfEntry
RIPv2-MIBrip2IfConfEntry
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
VRRP-MIBvrrpOperVrId

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BROADCOM-REF-MIB
FASTPATH-ROUTING-MIB
IANAifType-MIB
IF-MIB
OSPF-MIB
RIPv2-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
VRRP-MIB

Textual conventions

NameOIDSyntaxAccessStatus
AutoCostRefBw
TEXTUAL-CONVENTION
The value of reference bandwidth from which ospf calculates metric cost.
current
SpfTimerRange
TEXTUAL-CONVENTION
The range of intervals on which Spf timers can be configured.
current

Objects

NameOIDSyntaxAccessStatus
agentSwitchArpGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.1
agentSwitchArpAgeoutTime
OBJECT-TYPE
Configures the ARP entry ageout time in seconds. Allowable range: 15-21600
1.3.6.1.4.1.4413.1.1.2.1.1Integer32 (15..21600)read-writecurrent
agentSwitchArpResponseTime
OBJECT-TYPE
Configures the ARP request response timeout in seconds. Allowable range: 1-10
1.3.6.1.4.1.4413.1.1.2.1.2Integer32 (1..10)read-writecurrent
agentSwitchArpMaxRetries
OBJECT-TYPE
Configures the ARP count of maximum request for retries. Allowable range: 0-10
1.3.6.1.4.1.4413.1.1.2.1.3Integer32 (0..10)read-writecurrent
agentSwitchArpCacheSize
OBJECT-TYPE
Configures the ARP maximum number of entries in the cache. Allowable range is platform-specific.
1.3.6.1.4.1.4413.1.1.2.1.4Integer32read-writecurrent
agentSwitchArpDynamicRenew
OBJECT-TYPE
This indicates the current setting of ARP dynamic renew mode.
1.3.6.1.4.1.4413.1.1.2.1.5INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchArpTotalEntryCountCurrent
OBJECT-TYPE
Current number of entries in the ARP cache.
1.3.6.1.4.1.4413.1.1.2.1.6Gauge32read-onlycurrent
agentSwitchArpTotalEntryCountPeak
OBJECT-TYPE
Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed.
1.3.6.1.4.1.4413.1.1.2.1.7Gauge32read-onlycurrent
agentSwitchArpStaticEntryCountCurrent
OBJECT-TYPE
Current number of configured static ARP entries.
1.3.6.1.4.1.4413.1.1.2.1.8Gauge32read-onlycurrent
agentSwitchArpStaticEntryCountMax
OBJECT-TYPE
Maximum number of configurable static ARP entries.
1.3.6.1.4.1.4413.1.1.2.1.9Integer32read-onlycurrent
agentSwitchArpTable
OBJECT-TYPE
This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information.
1.3.6.1.4.1.4413.1.1.2.1.10not-accessibleobsolete
agentSwitchArpEntry
OBJECT-TYPE
1.3.6.1.4.1.4413.1.1.2.1.10.1not-accessibleobsolete
agentSwitchArpAge
OBJECT-TYPE
This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are not subject to aging.
1.3.6.1.4.1.4413.1.1.2.1.10.1.1TimeTicksread-onlyobsolete
agentSwitchArpIpAddress
OBJECT-TYPE
The IP Address assigned to each interface.
1.3.6.1.4.1.4413.1.1.2.1.10.1.2IpAddressread-onlyobsolete
agentSwitchArpMacAddress
OBJECT-TYPE
The hardware MAX Address that each interface maps to.
1.3.6.1.4.1.4413.1.1.2.1.10.1.3PhysAddressread-createobsolete
agentSwitchArpInterface
OBJECT-TYPE
The Associated IfIndex which identified the ARP Entry.
1.3.6.1.4.1.4413.1.1.2.1.10.1.4Integer32read-createobsolete
agentSwitchArpType
OBJECT-TYPE
The type of ARP entry.
1.3.6.1.4.1.4413.1.1.2.1.10.1.5INTEGER {local(1), gateway(2), static(3), dynamic(4)}read-onlyobsolete
agentSwitchArpStatus
OBJECT-TYPE
The status of this ARP entry. Setting this object destroy will remove the entry.
1.3.6.1.4.1.4413.1.1.2.1.10.1.6RowStatusread-writeobsolete
agentSwitchLocalProxyArpTable
OBJECT-TYPE
This table contains the per-interface configuration parameters for Local Proxy Arp.
1.3.6.1.4.1.4413.1.1.2.1.11not-accessiblecurrent
agentSwitchLocalProxyArpEntry
OBJECT-TYPE
Represents a logical row in the agentSwitchLocalProxyArpTable
1.3.6.1.4.1.4413.1.1.2.1.11.1not-accessiblecurrent
agentSwitchLocalProxyArpMode
OBJECT-TYPE
The Local Proxy Arp Mode for the interface.
1.3.6.1.4.1.4413.1.1.2.1.11.1.1INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIntfArpTable
OBJECT-TYPE
This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information.
1.3.6.1.4.1.4413.1.1.2.1.12not-accessiblecurrent
agentSwitchIntfArpEntry
OBJECT-TYPE
1.3.6.1.4.1.4413.1.1.2.1.12.1not-accessiblecurrent
agentSwitchIntfArpIpAddress
OBJECT-TYPE
The Type of Address assigned to this interface.
1.3.6.1.4.1.4413.1.1.2.1.12.1.1IpAddressnot-accessiblecurrent
agentSwitchIntfArpIfIndex
OBJECT-TYPE
The Associated IfIndex which identified the ARP Entry. This value must be specified for static ARP entries on an unnumbered interface
1.3.6.1.4.1.4413.1.1.2.1.12.1.2InterfaceIndexnot-accessiblecurrent
agentSwitchIntfArpAge
OBJECT-TYPE
This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are not subject to aging.
1.3.6.1.4.1.4413.1.1.2.1.12.1.3TimeTicksread-onlycurrent
agentSwitchIntfArpMacAddress
OBJECT-TYPE
The hardware MAX Address that each interface maps to.
1.3.6.1.4.1.4413.1.1.2.1.12.1.4PhysAddressread-createcurrent
agentSwitchIntfArpType
OBJECT-TYPE
The type of ARP entry.
1.3.6.1.4.1.4413.1.1.2.1.12.1.5INTEGER {local(1), gateway(2), static(3), dynamic(4)}read-onlycurrent
agentSwitchIntfArpStatus
OBJECT-TYPE
The status of this ARP entry. Setting this object destroy will remove the entry.
1.3.6.1.4.1.4413.1.1.2.1.12.1.6RowStatusread-createcurrent
agentSwitchIpGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.2
agentSwitchIpRoutingMode
OBJECT-TYPE
Administratively enables/disables routing on the switch.
1.3.6.1.4.1.4413.1.1.2.2.1INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIpInterfaceTable
OBJECT-TYPE
1.3.6.1.4.1.4413.1.1.2.2.3not-accessiblecurrent
agentSwitchIpInterfaceEntry
OBJECT-TYPE
1.3.6.1.4.1.4413.1.1.2.2.3.1not-accessiblecurrent
agentSwitchIpInterfaceIfIndex
OBJECT-TYPE
The IfIndex associated with this instance.
1.3.6.1.4.1.4413.1.1.2.2.3.1.1Integer32 (0..2147483647)read-onlycurrent
agentSwitchIpInterfaceIpAddress
OBJECT-TYPE
The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time.
1.3.6.1.4.1.4413.1.1.2.2.3.1.2IpAddressread-writecurrent
agentSwitchIpInterfaceNetMask
OBJECT-TYPE
The NetMask assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceIpAddress must be set at the same time.
1.3.6.1.4.1.4413.1.1.2.2.3.1.3IpAddressread-writecurrent
agentSwitchIpInterfaceClearIp
OBJECT-TYPE
Sets the interfaces IpAddress and NetMask back to 0.0.0.0
1.3.6.1.4.1.4413.1.1.2.2.3.1.4INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIpInterfaceRoutingMode
OBJECT-TYPE
Enables or disables routing for this interface.
1.3.6.1.4.1.4413.1.1.2.2.3.1.5INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIpInterfaceProxyARPMode
OBJECT-TYPE
Enables or disables Proxy ARP for this interface.
1.3.6.1.4.1.4413.1.1.2.2.3.1.6INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIpInterfaceMtuValue
OBJECT-TYPE
Configures the MTU value for this interface. If the value returned is 0 this interface is not enabled for routing. It is not valid to set this value to 0 if routing is enabled.
1.3.6.1.4.1.4413.1.1.2.2.3.1.7Unsigned32 (0 | 128..1500)read-writecurrent
agentSwitchIpInterfaceBandwidth
OBJECT-TYPE
Configures the Bandwidth value for this interface. If the value returned is 0 bandwidth for this interface is not Configured.
1.3.6.1.4.1.4413.1.1.2.2.3.1.8Unsigned32 (0 | 1..10000000)read-writecurrent
agentSwitchIpInterfaceUnnumberedIfIndex
OBJECT-TYPE
If this object is non-zero, it indicates that the interface is unnumbered, and specifies which interface the address is borrowed from.
1.3.6.1.4.1.4413.1.1.2.2.3.1.9InterfaceIndexOrZeroread-onlycurrent
agentSwitchIpInterfaceIcmpUnreachables
OBJECT-TYPE
If this object is enable, it indicates that ICMP unreachables can be sent on this interface.
1.3.6.1.4.1.4413.1.1.2.2.3.1.10INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIpInterfaceIcmpRedirects
OBJECT-TYPE
If this object is enable and agentSwitchIpIcmpRedirectsMode is also enable ICMP Redirects can be sent on this interface.
1.3.6.1.4.1.4413.1.1.2.2.3.1.11INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIpRouterDiscoveryTable
OBJECT-TYPE
There is no global administrative flag for router discovery. The global routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing is disabled, router discovery is disabled as well.
1.3.6.1.4.1.4413.1.1.2.2.4not-accessiblecurrent
agentSwitchIpRouterDiscoveryEntry
OBJECT-TYPE
1.3.6.1.4.1.4413.1.1.2.2.4.1not-accessiblecurrent
agentSwitchIpRouterDiscoveryIfIndex
OBJECT-TYPE
Interface Number to configure Router Discovery on.
1.3.6.1.4.1.4413.1.1.2.2.4.1.1Integer32 (0..2147483647)read-onlycurrent
agentSwitchIpRouterDiscoveryAdvertiseMode
OBJECT-TYPE
Enable or disable router discovery on the interface.
1.3.6.1.4.1.4413.1.1.2.2.4.1.2INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval
OBJECT-TYPE
Maximum time allowed between sending router advertisements from the interface.
1.3.6.1.4.1.4413.1.1.2.2.4.1.3Integer32 (4..1800)read-writecurrent
agentSwitchIpRouterDiscoveryMinAdvertisementInterval
OBJECT-TYPE
Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
1.3.6.1.4.1.4413.1.1.2.2.4.1.4Integer32 (3..1800)read-writecurrent
agentSwitchIpRouterDiscoveryAdvertisementLifetime
OBJECT-TYPE
Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
1.3.6.1.4.1.4413.1.1.2.2.4.1.5Integer32 (4..9000)read-writecurrent
agentSwitchIpRouterDiscoveryPreferenceLevel
OBJECT-TYPE
Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference.
1.3.6.1.4.1.4413.1.1.2.2.4.1.6Integer32read-writecurrent
agentSwitchIpRouterDiscoveryAdvertisementAddress
OBJECT-TYPE
Address used when sending router advertisements from the interface.
1.3.6.1.4.1.4413.1.1.2.2.4.1.7IpAddressread-writecurrent
agentSwitchIpVlanTable
OBJECT-TYPE
1.3.6.1.4.1.4413.1.1.2.2.5not-accessiblecurrent
agentSwitchIpVlanEntry
OBJECT-TYPE
A Static VLAN for which routing can be enabled/disabled
1.3.6.1.4.1.4413.1.1.2.2.5.1not-accessiblecurrent
agentSwitchIpVlanId
OBJECT-TYPE
The Vlan's Id.
1.3.6.1.4.1.4413.1.1.2.2.5.1.1Integer32 (0..2147483647)read-onlycurrent
agentSwitchIpVlanIfIndex
OBJECT-TYPE
The IfIndex associated with this VLAN.
1.3.6.1.4.1.4413.1.1.2.2.5.1.2Integer32read-onlycurrent
agentSwitchIpVlanRoutingStatus
OBJECT-TYPE
Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing
1.3.6.1.4.1.4413.1.1.2.2.5.1.3RowStatusread-createcurrent
agentSwitchSecondaryAddressTable
OBJECT-TYPE
Contains a list of secondary IP Addresses associated with an interface.
1.3.6.1.4.1.4413.1.1.2.2.6not-accessiblecurrent
agentSwitchSecondaryAddressEntry
OBJECT-TYPE
A secondary IP Address for a given interface. This IP Address must not conflict with the IP Address configured in the agentSwitchIpInterfaceTable.
1.3.6.1.4.1.4413.1.1.2.2.6.1not-accessiblecurrent
agentSwitchSecondaryIpAddress
OBJECT-TYPE
The Secondary IP Address assigned to this interface.
1.3.6.1.4.1.4413.1.1.2.2.6.1.1IpAddressnot-accessiblecurrent
agentSwitchSecondaryNetMask
OBJECT-TYPE
The Secondary Net Mask assigned to this interface. This value must be set during creation, and can not be changed.
1.3.6.1.4.1.4413.1.1.2.2.6.1.2IpAddressread-createcurrent
agentSwitchSecondaryStatus
OBJECT-TYPE
Creates a new entry in the Secondary Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentSwitchSecondaryNetMask object must be set during creation. destroy(6) - Removes the associated address from the interface.
1.3.6.1.4.1.4413.1.1.2.2.6.1.3RowStatusread-createcurrent
agentSwitchHelperAddressTable
OBJECT-TYPE
Replaced by agentSwitchIntfIpHelperAddressTable.
1.3.6.1.4.1.4413.1.1.2.2.7not-accessibleobsolete
agentSwitchHelperAddressEntry
OBJECT-TYPE
A Helper IP Address for a given interface.
1.3.6.1.4.1.4413.1.1.2.2.7.1not-accessibleobsolete
agentSwitchHelperIpAddress
OBJECT-TYPE
The Helper IP Address assigned to this interface.
1.3.6.1.4.1.4413.1.1.2.2.7.1.1IpAddressnot-accessibleobsolete
agentSwitchHelperStatus
OBJECT-TYPE
Creates a new entry in the Helper Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentSwitchHelperNetMask object must be set during creation. destroy(6) - Removes the associated address from the interface.
1.3.6.1.4.1.4413.1.1.2.2.7.1.2RowStatusread-createobsolete
agentSwitchIpIcmpControlGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.2.8
agentSwitchIpIcmpEchoReplyMode
OBJECT-TYPE
Sets the administrative Echo Reply Mode.
1.3.6.1.4.1.4413.1.1.2.2.8.1INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIpIcmpRedirectsMode
OBJECT-TYPE
Sets the administrative Mode for sending Redirects.
1.3.6.1.4.1.4413.1.1.2.2.8.2INTEGER {enable(1), disable(2)}read-writecurrent
agentSwitchIpIcmpRateLimitInterval
OBJECT-TYPE
Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit.
1.3.6.1.4.1.4413.1.1.2.2.8.3Integer32 (0..2147483647)read-writecurrent
agentSwitchIpIcmpRateLimitBurstSize
OBJECT-TYPE
Specifies the number of tokens to be placed after timeout.
1.3.6.1.4.1.4413.1.1.2.2.8.4Integer32 (1..200)read-writecurrent
agentSwitchIntfIpHelperAddressTable
OBJECT-TYPE
Contains a list of IP helper addresses associated with an interface.
1.3.6.1.4.1.4413.1.1.2.2.10not-accessiblecurrent
agentSwitchIntfIpHelperAddressEntry
OBJECT-TYPE
An IP helper address for a given interface.
1.3.6.1.4.1.4413.1.1.2.2.10.1not-accessiblecurrent
agentSwitchIntfIpHelperIpAddress
OBJECT-TYPE
An IP helper address for packets received on this interface. An address of 0.0.0.0 identifies the entry as a discard entry. Packets that match a discard entry are dropped.
1.3.6.1.4.1.4413.1.1.2.2.10.1.1IpAddressnot-accessiblecurrent
agentSwitchIntfIpHelperUdpPort
OBJECT-TYPE
UDP port number. Received packets with this destination UDP port number are forwarded to the helper address in this entry.
1.3.6.1.4.1.4413.1.1.2.2.10.1.2Unsigned32 (0..65535)not-accessiblecurrent
agentSwitchIntfIpHelperDiscard
OBJECT-TYPE
Variable obsoleted. To create a discard entry, set the helper address to 0.0.0.0.
1.3.6.1.4.1.4413.1.1.2.2.10.1.3TruthValueread-writeobsolete
agentSwitchIntfIpHelperHitCount
OBJECT-TYPE
The number of times a packet has been forwarded or discarded according to this entry.
1.3.6.1.4.1.4413.1.1.2.2.10.1.4Unsigned32read-onlycurrent
agentSwitchIntfIpHelperStatus
OBJECT-TYPE
Creates a new entry in the Helper Address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes the IP helper entry.
1.3.6.1.4.1.4413.1.1.2.2.10.1.5RowStatusread-createcurrent
agentRouterRipConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.3
agentRouterRipAdminState
OBJECT-TYPE
Sets the administrative mode of RIP in the router.
1.3.6.1.4.1.4413.1.1.2.3.1INTEGER {enable(1), disable(2)}read-writecurrent
agentRouterRipSplitHorizonMode
OBJECT-TYPE
Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2).
1.3.6.1.4.1.4413.1.1.2.3.2INTEGER {none(1), simple(2), poisonReverse(3)}read-writecurrent
agentRouterRipAutoSummaryMode
OBJECT-TYPE
Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever possible into aggregates. When set to disable(2), routes are not aggregated in RIP updates generated by this router. The default auto summary mode is enable(1).
1.3.6.1.4.1.4413.1.1.2.3.3INTEGER {enable(1), disable(2)}read-writecurrent
agentRouterRipHostRoutesAcceptMode
OBJECT-TYPE
Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) into its routing table. When set to disable(2), host routes advertized in RIP updates from neighboring routers are ignored. The default host routes accept mode is enable(1).
1.3.6.1.4.1.4413.1.1.2.3.4INTEGER {enable(1), disable(2)}read-writecurrent
agentRouterRipDefaultMetric
OBJECT-TYPE
Default metric of redistributed routes, when RIP redistributes from other protocols.
1.3.6.1.4.1.4413.1.1.2.3.5Integer32 (1..15)read-writecurrent
agentRouterRipDefaultMetricConfigured
OBJECT-TYPE
Flag to determine whether RIP default-metric is configured or not.
1.3.6.1.4.1.4413.1.1.2.3.6TruthValueread-writecurrent
agentRouterRipDefaultInfoOriginate
OBJECT-TYPE
Flag to determine, whether RIP can advertise a default-route learned from another protocol.
1.3.6.1.4.1.4413.1.1.2.3.7TruthValueread-writecurrent
agentRipRouteRedistTable
OBJECT-TYPE
This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
1.3.6.1.4.1.4413.1.1.2.3.8not-accessiblecurrent
agentRipRouteRedistEntry
OBJECT-TYPE
1.3.6.1.4.1.4413.1.1.2.3.8.1not-accessiblecurrent
agentRipRouteRedistSource
OBJECT-TYPE
Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry.
1.3.6.1.4.1.4413.1.1.2.3.8.1.1INTEGER {connected(1), static(2), ospf(3), bgp(4)}read-onlycurrent
agentRipRouteRedistMode
OBJECT-TYPE
User enabels/disables route-redistribution for a particular source protocol.
1.3.6.1.4.1.4413.1.1.2.3.8.1.2INTEGER {enable(1), disable(2)}read-writecurrent
agentRipRouteRedistMetric
OBJECT-TYPE
Metric used for redistributing a particular source protocol route into RIP.
1.3.6.1.4.1.4413.1.1.2.3.8.1.3Integer32 (0..15)read-writecurrent
agentRipRouteRedistMetricConfigured
OBJECT-TYPE
Flag to determine whether RIP redistribute-metric is configured or not.
1.3.6.1.4.1.4413.1.1.2.3.8.1.4TruthValueread-writecurrent
agentRipRouteRedistMatchInternal
OBJECT-TYPE
If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf.
1.3.6.1.4.1.4413.1.1.2.3.8.1.5INTEGER {true(1), false(2), not-applicable(3)}read-writecurrent
agentRipRouteRedistMatchExternal1
OBJECT-TYPE
If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf.
1.3.6.1.4.1.4413.1.1.2.3.8.1.6INTEGER {true(1), false(2), not-applicable(3)}read-writecurrent
agentRipRouteRedistMatchExternal2
OBJECT-TYPE
If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf.
1.3.6.1.4.1.4413.1.1.2.3.8.1.7INTEGER {true(1), false(2), not-applicable(3)}read-writecurrent
agentRipRouteRedistMatchNSSAExternal1
OBJECT-TYPE
If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf.
1.3.6.1.4.1.4413.1.1.2.3.8.1.8INTEGER {true(1), false(2), not-applicable(3)}read-writecurrent
agentRipRouteRedistMatchNSSAExternal2
OBJECT-TYPE
If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf.
1.3.6.1.4.1.4413.1.1.2.3.8.1.9INTEGER {true(1), false(2), not-applicable(3)}read-writecurrent
agentRipRouteRedistDistList
OBJECT-TYPE
Access-list number of the access-list, which filters routes received from a source-protocol.
1.3.6.1.4.1.4413.1.1.2.3.8.1.10Unsigned32 (1..199)read-writecurrent
agentRipRouteRedistDistListConfigured
OBJECT-TYPE
Flag to determine whether Access-list is configured or not.
1.3.6.1.4.1.4413.1.1.2.3.8.1.11TruthValueread-writecurrent
agentRip2IfConfTable
OBJECT-TYPE
A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB.
1.3.6.1.4.1.4413.1.1.2.3.9not-accessiblecurrent
agentRip2IfConfEntry
OBJECT-TYPE
A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB.
1.3.6.1.4.1.4413.1.1.2.3.9.1not-accessiblecurrent
agentRip2IfConfAuthKeyId
OBJECT-TYPE
The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the value is not used.
1.3.6.1.4.1.4413.1.1.2.3.9.1.1INTEGER (0..255)read-createcurrent
agentRouterRipRoutePref
OBJECT-TYPE
The route preference, sometimes called administrative distance, for RIP routes. A route with a preference of 255 is considered unreachable.
1.3.6.1.4.1.4413.1.1.2.3.10INTEGER (1..255)read-createcurrent
agentRouterOspfConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.4
agentOspfDefaultMetric
OBJECT-TYPE
Default metric of redistributed routes, when OSPF redistributes from other protocols.
1.3.6.1.4.1.4413.1.1.2.4.1Integer32 (1..16777214)read-writecurrent
agentOspfDefaultMetricConfigured
OBJECT-TYPE
Flag to determine whether OSPF default-metric is configured or not.
1.3.6.1.4.1.4413.1.1.2.4.2TruthValueread-writecurrent
agentOspfDefaultInfoOriginate
OBJECT-TYPE
Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
1.3.6.1.4.1.4413.1.1.2.4.3TruthValueread-writecurrent
agentOspfDefaultInfoOriginateAlways
OBJECT-TYPE
When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
1.3.6.1.4.1.4413.1.1.2.4.4TruthValueread-writecurrent
agentOspfDefaultInfoOriginateMetric
OBJECT-TYPE
Metric of the default route, which OSPF advertises when learned from other protocol. (0) indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..16777214).
1.3.6.1.4.1.4413.1.1.2.4.5Integer32 (0 | 1..16777214)read-writecurrent
agentOspfDefaultInfoOriginateMetricConfigured
OBJECT-TYPE
Flag to determine whether OSPF default-info originate metric is configured or not.
1.3.6.1.4.1.4413.1.1.2.4.6TruthValueread-writecurrent
agentOspfDefaultInfoOriginateMetricType
OBJECT-TYPE
Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
1.3.6.1.4.1.4413.1.1.2.4.7INTEGER {externalType1(1), externalType2(2)}read-writecurrent
agentOspfRouteRedistTable
OBJECT-TYPE
This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
1.3.6.1.4.1.4413.1.1.2.4.8not-accessiblecurrent
agentOspfRouteRedistEntry
OBJECT-TYPE
1.3.6.1.4.1.4413.1.1.2.4.8.1not-accessiblecurrent
agentOspfRouteRedistSource
OBJECT-TYPE
Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry.
1.3.6.1.4.1.4413.1.1.2.4.8.1.1INTEGER {connected(1), static(2), rip(3), bgp(4)}read-onlycurrent
agentOspfRouteRedistMode
OBJECT-TYPE
User enabels/disables route-redistribution for a particular source protocol.
1.3.6.1.4.1.4413.1.1.2.4.8.1.2INTEGER {enable(1), disable(2)}read-writecurrent
agentOspfRouteRedistMetric
OBJECT-TYPE
Metric used for redistributing a particular source protocol route into OSPF.
1.3.6.1.4.1.4413.1.1.2.4.8.1.3Integer32 (0..16777214)read-writecurrent
agentOspfRouteRedistMetricConfigured
OBJECT-TYPE
Flag to determine whether OSPF redistribute-metric is configured or not.
1.3.6.1.4.1.4413.1.1.2.4.8.1.4TruthValueread-writecurrent
agentOspfRouteRedistMetricType
OBJECT-TYPE
Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).
1.3.6.1.4.1.4413.1.1.2.4.8.1.5INTEGER {externalType1(1), externalType2(2)}read-writecurrent
agentOspfRouteRedistTag
OBJECT-TYPE
It specifies the tag field in routes redistributed by OSPF.
1.3.6.1.4.1.4413.1.1.2.4.8.1.6Unsigned32 (0..4294967295)read-writecurrent
agentOspfRouteRedistSubnets
OBJECT-TYPE
If this value is false, then OSPF will not redistribute subnetted routes.
1.3.6.1.4.1.4413.1.1.2.4.8.1.7TruthValueread-writecurrent
agentOspfRouteRedistDistList
OBJECT-TYPE
Access-list number of the access-list, which filters routes received from a source-protocol.
1.3.6.1.4.1.4413.1.1.2.4.8.1.8Unsigned32 (1..199)read-writecurrent
agentOspfRouteRedistDistListConfigured
OBJECT-TYPE
Flag to determine whether Access-list is configured or not.
1.3.6.1.4.1.4413.1.1.2.4.8.1.9TruthValueread-writecurrent
agentOspfIfTable
OBJECT-TYPE
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.
1.3.6.1.4.1.4413.1.1.2.4.9not-accessiblecurrent
agentOspfIfEntry
OBJECT-TYPE
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB.
1.3.6.1.4.1.4413.1.1.2.4.9.1not-accessiblecurrent
agentOspfIfAuthKeyId
OBJECT-TYPE
The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the value is not used.
1.3.6.1.4.1.4413.1.1.2.4.9.1.1INTEGER (0..255)read-createcurrent
agentOspfIfIpMtuIgnoreFlag
OBJECT-TYPE
Configures the IP MTU Ignore Flag value for this OSPF interface.
1.3.6.1.4.1.4413.1.1.2.4.9.1.2INTEGER {enable(1), disable(2)}read-writecurrent
agentOspfIfPassiveMode
OBJECT-TYPE
Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation.
1.3.6.1.4.1.4413.1.1.2.4.9.1.3TruthValueread-writecurrent
agentOspfIfAdvertiseSecondaries
OBJECT-TYPE
Configures the advertisability of the secondary addresses configured on this interface.
1.3.6.1.4.1.4413.1.1.2.4.9.1.4INTEGER {enable(1), disable(2)}read-writecurrent
agentOspfVirtIfTable
OBJECT-TYPE
Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
1.3.6.1.4.1.4413.1.1.2.4.10not-accessiblecurrent
agentOspfVirtIfEntry
OBJECT-TYPE
Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB.
1.3.6.1.4.1.4413.1.1.2.4.10.1not-accessiblecurrent
agentOspfVirtIfAuthKeyId
OBJECT-TYPE
The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwise, the value is not used.
1.3.6.1.4.1.4413.1.1.2.4.10.1.1INTEGER (0..255)read-createcurrent
agentRouterOspfRFC1583CompatibilityMode
OBJECT-TYPE
From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specified by RFC 1583 ([Ref9]). When set to 'disabled', the preference rules are those stated in Section 16.4.1, which prevent routing loops when AS- external-LSAs for the same destination have been originated from different areas. Set to 'enabled' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have RFC1583Compatibility set identically. When there are routers present that have not been updated with the functionality specified in Section 16.4.1 of this memo, all routers should have RFC1583Compatibility set to 'enabled'. Otherwise, all routers should have RFC1583Compatibility set to 'disabled', preventing all routing loops.
1.3.6.1.4.1.4413.1.1.2.4.11INTEGER {enable(1), disable(2)}read-writecurrent
agentOspfSpfDelayTime
OBJECT-TYPE
Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default time is 5 seconds. A value of 0 means that there is no delay; that is, the SPF calculation is started immediately.
1.3.6.1.4.1.4413.1.1.2.4.12SpfTimerRangeread-writecurrent
agentOspfSpfHoldTime
OBJECT-TYPE
Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means that there is no delay; that is, two SPF calculations can be done, one immediately after the other.
1.3.6.1.4.1.4413.1.1.2.4.13SpfTimerRangeread-writecurrent
agentOspfAutoCostRefBw
OBJECT-TYPE
Auto cost refernece bandwidth of the router interafaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps.
1.3.6.1.4.1.4413.1.1.2.4.14AutoCostRefBwread-writecurrent
agentOspfOpaqueLsaSupport
OBJECT-TYPE
The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
1.3.6.1.4.1.4413.1.1.2.4.15TruthValueread-writecurrent
agentOspfAreaOpaqueLsdbTable
OBJECT-TYPE
The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached to.
1.3.6.1.4.1.4413.1.1.2.4.16not-accessiblecurrent
agentOspfAreaOpaqueLsdbEntry
OBJECT-TYPE
A single AreaOpaque Link State Advertisement.
1.3.6.1.4.1.4413.1.1.2.4.16.1not-accessiblecurrent
agentOspfAreaOpaqueLsdbAreaId
OBJECT-TYPE
The 32 bit identifier of the Area from which the LSA was received.
1.3.6.1.4.1.4413.1.1.2.4.16.1.1IpAddressread-onlycurrent
agentOspfAreaOpaqueLsdbType
OBJECT-TYPE
The type of the link state advertisement. Each link state type has a separate advertisement format.
1.3.6.1.4.1.4413.1.1.2.4.16.1.2INTEGER {areaOpaqueLink(10)}read-onlycurrent
agentOspfAreaOpaqueLsdbLsid
OBJECT-TYPE
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
1.3.6.1.4.1.4413.1.1.2.4.16.1.3IpAddressread-onlycurrent
agentOspfAreaOpaqueLsdbRouterId
OBJECT-TYPE
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.4413.1.1.2.4.16.1.4IpAddressread-onlycurrent
agentOspfAreaOpaqueLsdbSequence
OBJECT-TYPE
The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
1.3.6.1.4.1.4413.1.1.2.4.16.1.5Integer32read-onlycurrent
agentOspfAreaOpaqueLsdbAge
OBJECT-TYPE
This field is the age of the link state advertisement in seconds.
1.3.6.1.4.1.4413.1.1.2.4.16.1.6Integer32read-onlycurrent
agentOspfAreaOpaqueLsdbChecksum
OBJECT-TYPE
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
1.3.6.1.4.1.4413.1.1.2.4.16.1.7Integer32read-onlycurrent
agentOspfAreaOpaqueLsdbAdvertisement
OBJECT-TYPE
The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size
1.3.6.1.4.1.4413.1.1.2.4.16.1.8OCTET STRING (SIZE(1..65535))read-onlycurrent
agentOspfLocalLsdbTable
OBJECT-TYPE
The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local Link State Advertisements for non-virtual links. The purpose is to allow Link-Local LSAs to be displayed for each non-virtual interface. This table is implemented to support type-9 LSAs which are defined in 'The OSPF Opaque LSA Option'.
1.3.6.1.4.1.4413.1.1.2.4.17not-accessiblecurrent
agentOspfLocalLsdbEntry
OBJECT-TYPE
A single Link State Advertisement.
1.3.6.1.4.1.4413.1.1.2.4.17.1not-accessiblecurrent
agentOspfLocalLsdbIpAddress
OBJECT-TYPE
The IP Address of the interface from which the LSA was received if the interface is numbered.
1.3.6.1.4.1.4413.1.1.2.4.17.1.1IpAddressread-onlycurrent
agentOspfLocalLsdbAddressLessIf
OBJECT-TYPE
The Interface Index of the interface from which the LSA was received if the interface is unnumbered.
1.3.6.1.4.1.4413.1.1.2.4.17.1.2InterfaceIndexOrZeroread-onlycurrent
agentOspfLocalLsdbType
OBJECT-TYPE
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
1.3.6.1.4.1.4413.1.1.2.4.17.1.3INTEGER {localOpaqueLink(9)}read-onlycurrent
agentOspfLocalLsdbLsid
OBJECT-TYPE
The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.
1.3.6.1.4.1.4413.1.1.2.4.17.1.4IpAddressread-onlycurrent
agentOspfLocalLsdbRouterId
OBJECT-TYPE
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.4413.1.1.2.4.17.1.5RouterIDread-onlycurrent
agentOspfLocalLsdbSequence
OBJECT-TYPE
The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
1.3.6.1.4.1.4413.1.1.2.4.17.1.6Integer32read-onlycurrent
agentOspfLocalLsdbAge
OBJECT-TYPE
This field is the age of the link state adver- tisement in seconds.
1.3.6.1.4.1.4413.1.1.2.4.17.1.7Integer32read-onlycurrent
agentOspfLocalLsdbChecksum
OBJECT-TYPE
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
1.3.6.1.4.1.4413.1.1.2.4.17.1.8Integer32read-onlycurrent
agentOspfLocalLsdbAdvertisement
OBJECT-TYPE
The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.
1.3.6.1.4.1.4413.1.1.2.4.17.1.9OCTET STRING (SIZE(1..65535))read-onlycurrent
agentOspfAsLsdbTable
OBJECT-TYPE
The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. This table is identical to the OSPF LSDB Table in format, but contains only AS-scope Link State Advertisements. The purpose is to allow AS-scope LSAs to be displayed once for the router rather than once in each non-stub area.
1.3.6.1.4.1.4413.1.1.2.4.18not-accessiblecurrent
agentOspfAsLsdbEntry
OBJECT-TYPE
A single Link State Advertisement.
1.3.6.1.4.1.4413.1.1.2.4.18.1not-accessiblecurrent
agentOspfAsLsdbType
OBJECT-TYPE
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
1.3.6.1.4.1.4413.1.1.2.4.18.1.1INTEGER {asOpaqueLink(11)}read-onlycurrent
agentOspfAsLsdbLsid
OBJECT-TYPE
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
1.3.6.1.4.1.4413.1.1.2.4.18.1.2IpAddressread-onlycurrent
agentOspfAsLsdbRouterId
OBJECT-TYPE
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.4413.1.1.2.4.18.1.3RouterIDread-onlycurrent
agentOspfAsLsdbSequence
OBJECT-TYPE
The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
1.3.6.1.4.1.4413.1.1.2.4.18.1.4Integer32read-onlycurrent
agentOspfAsLsdbAge
OBJECT-TYPE
This field is the age of the link state adver- tisement in seconds.
1.3.6.1.4.1.4413.1.1.2.4.18.1.5Integer32read-onlycurrent
agentOspfAsLsdbChecksum
OBJECT-TYPE
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
1.3.6.1.4.1.4413.1.1.2.4.18.1.6Integer32read-onlycurrent
agentOspfAsLsdbAdvertisement
OBJECT-TYPE
The entire Link State Advertisement, including its header.
1.3.6.1.4.1.4413.1.1.2.4.18.1.7OCTET STRING (SIZE(1..65535))read-onlycurrent
agentOspfDefaultPassiveMode
OBJECT-TYPE
Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation.
1.3.6.1.4.1.4413.1.1.2.4.19TruthValueread-writecurrent
agentOspfRoutePrefIntraArea
OBJECT-TYPE
The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.
1.3.6.1.4.1.4413.1.1.2.4.20INTEGER (1..255)read-writecurrent
agentOspfRoutePrefInterArea
OBJECT-TYPE
The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.
1.3.6.1.4.1.4413.1.1.2.4.21INTEGER (1..255)read-writecurrent
agentOspfRoutePrefExternal
OBJECT-TYPE
The route preference, sometimes called administrative distance, for external OSPFv2 routes. A route with a preference of 255 is considered unreachable.
1.3.6.1.4.1.4413.1.1.2.4.22INTEGER (1..255)read-writecurrent
agentSnmpTrapFlagsConfigGroupLayer3
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.5
agentSnmpVRRPNewMasterTrapFlag
OBJECT-TYPE
This flag enables the sending of VRRP new master notification traps.
1.3.6.1.4.1.4413.1.1.2.5.1INTEGER {enable(1), disable(2)}read-writecurrent
agentSnmpVRRPAuthFailureTrapFlag
OBJECT-TYPE
This flag enables the sending of VRRP authentication failure notification traps.
1.3.6.1.4.1.4413.1.1.2.5.2INTEGER {enable(1), disable(2)}read-writecurrent
agentBootpDhcpRelayGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.6
agentBootpDhcpRelayMaxHopCount
OBJECT-TYPE
The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16 assuming that the request is looped through the intermediate agents. The default value is 4.
1.3.6.1.4.1.4413.1.1.2.6.1Integer32 (1..16)read-writecurrent
agentBootpDhcpRelayForwardingIp
OBJECT-TYPE
DHCP server addresses are now configured through IP helper.
1.3.6.1.4.1.4413.1.1.2.6.2IpAddressread-writeobsolete
agentBootpDhcpRelayForwardMode
OBJECT-TYPE
The DHCP relay admin mode is replaced by the IP helper admin mode.
1.3.6.1.4.1.4413.1.1.2.6.3INTEGER {enable(1), disable(2)}read-writeobsolete
agentBootpDhcpRelayMinWaitTime
OBJECT-TYPE
The BOOTP/DHCP Minimum Wait Time. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs' (seconds since client began booting) field of the request as a factor in deciding whether to relay the request or not.
1.3.6.1.4.1.4413.1.1.2.6.4Integer32 (0..100)read-writecurrent
agentBootpDhcpRelayCircuitIdOptionMode
OBJECT-TYPE
The BOOTP/DHCP Circuit ID Option Mode. This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options.
1.3.6.1.4.1.4413.1.1.2.6.5INTEGER {enable(1), disable(2)}read-writecurrent
agentBootpDhcpRelayNumOfRequestsReceived
OBJECT-TYPE
Replaced by IP helper statistics.
1.3.6.1.4.1.4413.1.1.2.6.6Integer32read-onlyobsolete
agentBootpDhcpRelayNumOfRequestsForwarded
OBJECT-TYPE
Replaced by IP helper statistics.
1.3.6.1.4.1.4413.1.1.2.6.7Integer32read-onlyobsolete
agentBootpDhcpRelayNumOfDiscards
OBJECT-TYPE
Replaced by IP helper statistics.
1.3.6.1.4.1.4413.1.1.2.6.8Integer32read-onlyobsolete
agentECMPGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.7
agentECMPOspfMaxPaths
OBJECT-TYPE
It sets the number of paths that OSPF can report for a given destination where maxpaths is platform-dependent.
1.3.6.1.4.1.4413.1.1.2.7.1Integer32read-writecurrent
agentRouterVrrpConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.8
agentRouterVrrpAdminState
OBJECT-TYPE
Sets the administrative mode of VRRP in the router.
1.3.6.1.4.1.4413.1.1.2.8.1INTEGER {enable(1), disable(2)}read-writecurrent
agentRouterVrrpConfiguredTable
OBJECT-TYPE
Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `agentRouterVrrpConfiguredEntry' items.
1.3.6.1.4.1.4413.1.1.2.8.2not-accessiblecurrent
agentRouterVrrpConfiguredEntry
OBJECT-TYPE
An entry in the table contains operational priority that is associated with a virtual router.
1.3.6.1.4.1.4413.1.1.2.8.2.1not-accessiblecurrent
agentRouterVrrpConfiguredPriority
OBJECT-TYPE
This object specifies the value set by the vrrpOperPriority object. The GET operation on 'vrrpOperPriority' will be affected by both the tracking process and the configured priority set by the vrrpOperPriority object.
1.3.6.1.4.1.4413.1.1.2.8.2.1.1Integer32 (1..254)read-onlycurrent
agentVrrpOperations
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.9
agentRouterVrrpOperTable
OBJECT-TYPE
Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `agentRouterVrrpOperEntry' items.
1.3.6.1.4.1.4413.1.1.2.9.1not-accessibleobsolete
agentRouterVrrpOperEntry
OBJECT-TYPE
An entry in the table contains operational priority that is associated with a virtual router.
1.3.6.1.4.1.4413.1.1.2.9.1.1not-accessibleobsolete
agentRouterVrrpOperPriority
OBJECT-TYPE
This object specifies the operational priority of the VRRP router. This value will be afftected by both the tracking process and the configured priority set by the vrrpOperPriority object.
1.3.6.1.4.1.4413.1.1.2.9.1.1.1Integer32 (0..255)read-onlyobsolete
agentRouterVrrpTrackGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.10
agentRouterVrrpTrackIntfTable
OBJECT-TYPE
Tracking table for a VRRP router which consists of agentRouterVrrpTrackIntfEntry items.
1.3.6.1.4.1.4413.1.1.2.10.1not-accessiblecurrent
agentRouterVrrpTrackIntfEntry
OBJECT-TYPE
An entry in the table contains tracked IP interfaces associated with a virtual router.
1.3.6.1.4.1.4413.1.1.2.10.1.1not-accessiblecurrent
agentRouterVrrpTrackIntf
OBJECT-TYPE
This object specifies the interface to be tracked.
1.3.6.1.4.1.4413.1.1.2.10.1.1.1InterfaceIndexread-createcurrent
agentRouterVrrpTrackIfPrioDec
OBJECT-TYPE
This object specifies the decrement priority of the VRRP router.
1.3.6.1.4.1.4413.1.1.2.10.1.1.2Integer32 (1..254)read-createcurrent
agentRouterVrrpTrackIfState
OBJECT-TYPE
This object specifies the IP state of the tracked interface for the virtual router.
1.3.6.1.4.1.4413.1.1.2.10.1.1.3TruthValueread-onlycurrent
agentRouterVrrpTrackIfStatus
OBJECT-TYPE
The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). The newly created row will be in active state later. To destroy the row set this object to destroy.
1.3.6.1.4.1.4413.1.1.2.10.1.1.4RowStatusread-createcurrent
agentRouterVrrpTrackRouteTable
OBJECT-TYPE
Tracking table for a VRRP router which consists of a 'agentRouterVrrpTrackRouteEntry' items.
1.3.6.1.4.1.4413.1.1.2.10.2not-accessiblecurrent
agentRouterVrrpTrackRouteEntry
OBJECT-TYPE
An entry in the table contains tracked Routes associated with a virtual router.
1.3.6.1.4.1.4413.1.1.2.10.2.1not-accessiblecurrent
agentRouterVrrpTrackRtPfx
OBJECT-TYPE
This object specifies the prefix of the route to be tracked.
1.3.6.1.4.1.4413.1.1.2.10.2.1.1IpAddressread-createcurrent
agentRouterVrrpTrackRtPfxLen
OBJECT-TYPE
This object specifies prefix length of the route to be tracked.
1.3.6.1.4.1.4413.1.1.2.10.2.1.2Integer32 (0..32)read-createcurrent
agentRouterVrrpTrackRtPrioDec
OBJECT-TYPE
This object specifies the decrement priority of the VRRP router.
1.3.6.1.4.1.4413.1.1.2.10.2.1.3Integer32 (1..254)read-createcurrent
agentRouterVrrpTrackRtReachable
OBJECT-TYPE
This object specifies the reachability of the tracked route.
1.3.6.1.4.1.4413.1.1.2.10.2.1.4TruthValueread-onlycurrent
agentRouterVrrpTrackRtStatus
OBJECT-TYPE
The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). The newly created row will be in active state later. To delete the tracked route set this object to destroy.
1.3.6.1.4.1.4413.1.1.2.10.2.1.5RowStatusread-createcurrent
agentIpHelperGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.11
agentIpHelperAdminMode
OBJECT-TYPE
Administratively enable or disable IP helper.
1.3.6.1.4.1.4413.1.1.2.11.1INTEGER {enable(1), disable(2)}read-writecurrent
agentDhcpClientMsgsReceived
OBJECT-TYPE
The Number of DHCP Requests Received. Total number of DHCP requests received from all clients.
1.3.6.1.4.1.4413.1.1.2.11.2Counter32read-onlycurrent
agentDhcpClientMsgsRelayed
OBJECT-TYPE
The Number of DHCP Requests Forwarded. Total number of DHCP requests relayed to a server.
1.3.6.1.4.1.4413.1.1.2.11.3Counter32read-onlycurrent
agentDhcpServerMsgsReceived
OBJECT-TYPE
The number of DHCP messages received from a server.
1.3.6.1.4.1.4413.1.1.2.11.4Counter32read-onlycurrent
agentDhcpServerMsgsRelayed
OBJECT-TYPE
The number of DHCP messages relayed to a server.
1.3.6.1.4.1.4413.1.1.2.11.5Counter32read-onlycurrent
agentUdpClientMsgsReceived
OBJECT-TYPE
The number of UDP messages received from all clients.
1.3.6.1.4.1.4413.1.1.2.11.6Counter32read-onlycurrent
agentUdpClientMsgsRelayed
OBJECT-TYPE
The number of UDP messages relayed to a server.
1.3.6.1.4.1.4413.1.1.2.11.7Counter32read-onlycurrent
agentSwitchIpHelperAddressTable
OBJECT-TYPE
Contains a list of IP helper addresses configured globally.
1.3.6.1.4.1.4413.1.1.2.11.8not-accessiblecurrent
agentSwitchIpHelperAddressEntry
OBJECT-TYPE
An IP Helper address that applies to packets received on any interface.
1.3.6.1.4.1.4413.1.1.2.11.8.1not-accessiblecurrent
agentSwitchIpHelperAddress
OBJECT-TYPE
The IP Helper address assigned to this interface.
1.3.6.1.4.1.4413.1.1.2.11.8.1.1IpAddressread-writecurrent
agentSwitchIpHelperUdpPort
OBJECT-TYPE
UDP port number.
1.3.6.1.4.1.4413.1.1.2.11.8.1.2Unsigned32 (0..65535)read-writecurrent
agentSwitchIpHelperHitCount
OBJECT-TYPE
The number of times a packet has been forwarded or discarded according to this entry.
1.3.6.1.4.1.4413.1.1.2.11.8.1.3Unsigned32read-onlycurrent
agentSwitchIpHelperStatus
OBJECT-TYPE
Creates a new entry in the global IP Helper address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes the IP helper entry.
1.3.6.1.4.1.4413.1.1.2.11.8.1.4RowStatusread-createcurrent
agentUdpClientMsgsTtlExpired
OBJECT-TYPE
The number of UDP messages received with an expired TTL.
1.3.6.1.4.1.4413.1.1.2.11.9Counter32read-onlycurrent
agentUdpClientMsgsDiscarded
OBJECT-TYPE
The number of UDP messages that matched a discard entry.
1.3.6.1.4.1.4413.1.1.2.11.10Counter32read-onlycurrent
agentInternalVlanGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.2.12
agentInternalVlanBase
OBJECT-TYPE
The VLAN ID internally assigned to the first port-based routing interface.
1.3.6.1.4.1.4413.1.1.2.12.1Integer32read-writecurrent
agentInternalVlanPolicy
OBJECT-TYPE
Whether to search up or down from the base VLAN ID for a free VLAN ID to assign to a port-based routing interface.
1.3.6.1.4.1.4413.1.1.2.12.2INTEGER {ascending(0), descending(1)}read-writecurrent
agentSwitchInternalVlanTable
OBJECT-TYPE
Contains a list of VLAN IDs used internally for port-based routing interfaces.
1.3.6.1.4.1.4413.1.1.2.12.3not-accessiblecurrent
agentSwitchInternalVlanEntry
OBJECT-TYPE
A VLAN ID internally assigned to a port-based routing interface.
1.3.6.1.4.1.4413.1.1.2.12.3.1not-accessiblecurrent
agentSwitchInternalVlanId
OBJECT-TYPE
A VLAN ID internally assigned to a port-based routing interface.
1.3.6.1.4.1.4413.1.1.2.12.3.1.1Integer32 (0..2147483647)not-accessiblecurrent
agentSwitchInternalVlanIfIndex
OBJECT-TYPE
Interface index of port-based routing interface using this VLAN ID.
1.3.6.1.4.1.4413.1.1.2.12.3.1.2Integer32read-onlycurrent