MIBs Depot

FASTPATH-QOS-DIFFSERV-PRIVATE-MIB

Registered at
1.3.6.1.4.1.4413.1.1.3.7
Last updated
2007-11-12 00:00
Organization
Netgear
Revisions
2007-11-12 00:00, 2007-05-23 00:00, 2005-06-23 00:00, 2004-10-06 00:00, 2003-11-21 00:00
Namespace
edgeswitch
Source file
FASTPATH-QOS-DIFFSERV-PRIVATE-MIB
Digest
sha256:1286d4d453f63ae106945928eb923f5d3b99092be56e752578f1d92873033277

Description

The Netgear Private MIB for FASTPATH DiffServ

Imports

FromSymbols
FASTPATH-QOS-MIBfastPathQOS
IANAifType-MIBIANAifType
IF-MIBInterfaceIndex, ifIndex
INET-ADDRESS-MIBInetPortNumber
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, RowPointer, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BROADCOM-REF-MIB
FASTPATH-QOS-DIFFSERV-PRIVATE-MIB
FASTPATH-QOS-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
EtypeValue
TEXTUAL-CONVENTION
Ethertype value of a packet. The allowed value is 0x0600 to 0xFFFF.
current
IntfDirection
TEXTUAL-CONVENTION
IntfDirection specifies a direction of data travel on an interface. 'inbound' traffic is operated on during reception from the interface, while 'outbound' traffic is operated on prior to transmission on the interface.
current
Ipv6AddressPrefix
TEXTUAL-CONVENTION
This data type is used to model IPv6 address prefixes. This is a binary string of up to 16 octets in network byte-order.
current
QosBurstSize
TEXTUAL-CONVENTION
The number of kilobytes (Kbytes) in a packet that may be sent in a traffic stream without regard for other traffic streams.
current

Objects

NameOIDSyntaxAccessStatus
agentDiffServGenStatusGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.3.7.1
agentDiffServGenStatusAdminMode
OBJECT-TYPE
DiffServ Admin Mode
1.3.6.1.4.1.4413.1.1.3.7.1.1INTEGER {enable(1), disable(2)}read-writecurrent
agentDiffServGenStatusClassTableSize
OBJECT-TYPE
Current size of the Class Table
1.3.6.1.4.1.4413.1.1.3.7.1.2Unsigned32read-onlycurrent
agentDiffServGenStatusClassTableMax
OBJECT-TYPE
Max size of the Class Table
1.3.6.1.4.1.4413.1.1.3.7.1.3Unsigned32read-onlycurrent
agentDiffServGenStatusClassRuleTableSize
OBJECT-TYPE
Current size of Class Rule Table
1.3.6.1.4.1.4413.1.1.3.7.1.4Unsigned32read-onlycurrent
agentDiffServGenStatusClassRuleTableMax
OBJECT-TYPE
Max size of the Class Rule Table.
1.3.6.1.4.1.4413.1.1.3.7.1.5Unsigned32read-onlycurrent
agentDiffServGenStatusPolicyTableSize
OBJECT-TYPE
Current Size of the Policy Table.
1.3.6.1.4.1.4413.1.1.3.7.1.6Unsigned32read-onlycurrent
agentDiffServGenStatusPolicyTableMax
OBJECT-TYPE
Max size of the Policy Table
1.3.6.1.4.1.4413.1.1.3.7.1.7Unsigned32read-onlycurrent
agentDiffServGenStatusPolicyInstTableSize
OBJECT-TYPE
Current size of the Policy-Class Instance Table
1.3.6.1.4.1.4413.1.1.3.7.1.8Unsigned32read-onlycurrent
agentDiffServGenStatusPolicyInstTableMax
OBJECT-TYPE
Max size of the Policy-Class Instance Table
1.3.6.1.4.1.4413.1.1.3.7.1.9Unsigned32read-onlycurrent
agentDiffServGenStatusPolicyAttrTableSize
OBJECT-TYPE
Current size of the Policy Attribute Table
1.3.6.1.4.1.4413.1.1.3.7.1.10Unsigned32read-onlycurrent
agentDiffServGenStatusPolicyAttrTableMax
OBJECT-TYPE
Max size of the Policy Attribute Table
1.3.6.1.4.1.4413.1.1.3.7.1.11Unsigned32read-onlycurrent
agentDiffServGenStatusServiceTableSize
OBJECT-TYPE
Current size of the Service Table
1.3.6.1.4.1.4413.1.1.3.7.1.12Unsigned32read-onlycurrent
agentDiffServGenStatusServiceTableMax
OBJECT-TYPE
Max size of the Service Table
1.3.6.1.4.1.4413.1.1.3.7.1.13Unsigned32read-onlycurrent
agentDiffServClassGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.3.7.2
agentDiffServClassIndexNextFree
OBJECT-TYPE
This object contains an unused value for classIndex, or a zero to indicate that none exists.
1.3.6.1.4.1.4413.1.1.3.7.2.1Unsigned32read-onlycurrent
agentDiffServClassTable
OBJECT-TYPE
A table of the DiffServ class entries
1.3.6.1.4.1.4413.1.1.3.7.2.2not-accessiblecurrent
agentDiffServClassEntry
OBJECT-TYPE
Represents entry for a DiffServ traffic class
1.3.6.1.4.1.4413.1.1.3.7.2.2.1not-accessiblecurrent
agentDiffServClassIndex
OBJECT-TYPE
The identifier for DiffServ Class entry
1.3.6.1.4.1.4413.1.1.3.7.2.2.1.1Unsigned32not-accessiblecurrent
agentDiffServClassName
OBJECT-TYPE
Name of the DiffServ traffic class
1.3.6.1.4.1.4413.1.1.3.7.2.2.1.2DisplayString (SIZE(1..31))read-createcurrent
agentDiffServClassType
OBJECT-TYPE
The class type indicates how the individual class match criteria are evaluated. For type all, all of the individual match conditions must be true for a packet to be considered a member of the class. For types any and acl, only one of the match criteria must be true for a packet to belong to the class; multiple matching criteria are evaluated in a sequential order, with the highest precedence awarded to the first criterion defined for the class. An acl class type copies its set of match criteria from the current rule definition of the specified ACL number.
1.3.6.1.4.1.4413.1.1.3.7.2.2.1.3INTEGER {all(1), any(2), acl(3)}read-createcurrent
agentDiffServClassAclNum
OBJECT-TYPE
The access list number used to define the match conditions for the DiffServ class. This attribute is only valid if the value of agentDiffServClassType is set to acl(3). Match conditions are copied from the ACL definition at the time the class is created and do not reflect subsequent changes to the ACL definition. This attribute requires that the agentDiffServClassAclType object also be set so that the ACL number can be interpreted relative to ip(1) or mac(2) ACLs. The objects may be set in either order. The FASTPATH-QOS-ACL-MIB defines an aclIndex for IP ACLs and an aclMacIndex for MAC ACLs. Setting this object to one of these values per the agentDiffServClassAclType causes the corresponding ACL rules to be used for creating the DiffServ class.
1.3.6.1.4.1.4413.1.1.3.7.2.2.1.4Unsigned32read-createcurrent
agentDiffServClassRuleIndexNextFree
OBJECT-TYPE
This object contains an unused value for classRuleIndex, or a zero to indicate that none exists. This index is maintained on a per-class basis.
1.3.6.1.4.1.4413.1.1.3.7.2.2.1.5Unsigned32read-onlycurrent
agentDiffServClassStorageType
OBJECT-TYPE
Storage-type for this conceptual row
1.3.6.1.4.1.4413.1.1.3.7.2.2.1.6StorageTyperead-createcurrent
agentDiffServClassRowStatus
OBJECT-TYPE
The status of this conceptual row. All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in agentDiffServClassRuleTable with corresponding values of agentDiffServClassIndex have been deleted.
1.3.6.1.4.1.4413.1.1.3.7.2.2.1.7RowStatusread-createcurrent
agentDiffServClassAclType
OBJECT-TYPE
The access list type used to define the match conditions for the DiffServ class. This attribute is only valid if the value of agentDiffServClassType is set to acl(3). When this attribute is set to ip(1), the agentDiffServClassAclNum object is interpreted as an IP ACL number per the aclIndex definition from the FASTPATH-QOS-ACL-MIB. When set to mac(2), the agentDiffServClassAclNum object is interpreted as a MAC ACL index per the aclMacIndex definition in the FASTPATH-QOS-ACL-MIB. When set to ipv6(3), the agentDiffServClassAclNum object is interpreted as a IPv6 ACL index per the aclIpv6Index definition in the FASTPATH-QOS-ACL-MIB. All these objects and agentDiffServClassAclNum must be set (in either order) for an agentDiffServClassType of acl(3).
1.3.6.1.4.1.4413.1.1.3.7.2.2.1.8INTEGER {ip(1), mac(2), ipv6(3)}read-createcurrent
agentDiffServClassProtoType
OBJECT-TYPE
The diffserv class protocol type used to indicate how to interpret any layer 3. This attribute is only valid if the value of agentDiffServClassProtoType is set to all(1) or any(2).
1.3.6.1.4.1.4413.1.1.3.7.2.2.1.9INTEGER {ipv4(1), ipv6(2)}read-createcurrent
agentDiffServClassRuleTable
OBJECT-TYPE
A table of the DiffServ Class Rule entries
1.3.6.1.4.1.4413.1.1.3.7.2.3not-accessiblecurrent
agentDiffServClassRuleEntry
OBJECT-TYPE
Represents entry for a set of class-match rules
1.3.6.1.4.1.4413.1.1.3.7.2.3.1not-accessiblecurrent
agentDiffServClassRuleIndex
OBJECT-TYPE
The identifier for DiffServ Class Rule Table entry within a class
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.1Unsigned32not-accessiblecurrent
agentDiffServClassRuleMatchEntryType
OBJECT-TYPE
Class Rule match entry type, it determines which one of the individual match conditions is defined for the present class rule. This object must be created before any other match object in this row.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.2INTEGER {cos(1), dstip(2), dstl4port(3), dstmac(4), every(5), ipdscp(6), ipprecedence(7), iptos(8), protocol(9), refclass(10), srcip(11), srcl4port(12), srcmac(13), vlan(14), cos2(15), etype(16), vlanid(17), vlanid2(18), flowLabel(19), srcPrefix(20), dstPrefix(21)}read-createcurrent
agentDiffServClassRuleMatchCos
OBJECT-TYPE
Three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame used as a class-match parameter - only valid if the agentDiffServClassRuleMatchEntryType is set to cos(1). For frames containing a double VLAN tag, this field is located in the first/outer tag.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.3Unsigned32 (0..7)read-createcurrent
agentDiffServClassRuleMatchDstIpAddr
OBJECT-TYPE
Destination IP address match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstip(2).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.4IpAddressread-createcurrent
agentDiffServClassRuleMatchDstIpMask
OBJECT-TYPE
Destination IP address mask match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstip(2). This mask value identifies the portion of agentDiffServClassRuleMatchDstIpAddr that is compared against a packet. A non-contiguous mask value is permitted.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.5IpAddressread-createcurrent
agentDiffServClassRuleMatchDstL4PortStart
OBJECT-TYPE
Destination layer 4 port range start match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.6InetPortNumberread-createcurrent
agentDiffServClassRuleMatchDstL4PortEnd
OBJECT-TYPE
Destination layer 4 port range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.7InetPortNumberread-createcurrent
agentDiffServClassRuleMatchDstMacAddr
OBJECT-TYPE
Destination MAC address match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstmac(4).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.8MacAddressread-createcurrent
agentDiffServClassRuleMatchDstMacMask
OBJECT-TYPE
Destination MAC address mask match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstmac(4). This mask value identifies the portion of agentDiffServClassRuleMatchDstMacAddr that is compared against a packet. A non-contiguous mask value is permitted.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.9MacAddressread-createcurrent
agentDiffServClassRuleMatchEvery
OBJECT-TYPE
Flag to indicate that the class rule is defined to match on every packet, regardless of content. - only valid if the agentDiffServClassRuleMatchEntryType is set to every(5).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.10TruthValueread-onlycurrent
agentDiffServClassRuleMatchIpDscp
OBJECT-TYPE
IP DiffServ Code Point (DSCP) match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to ipdscp(6). The DSCP is defined as the high-order six bits of the Service Type octet in the IPv4 header.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.11Unsigned32 (0..63)read-createcurrent
agentDiffServClassRuleMatchIpPrecedence
OBJECT-TYPE
IP Precedence match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to ipprecedence(7). The Precedence bits are defined as the high-order three bits of the Service Type octed in the IPv4 header.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.12Unsigned32 (0..7)read-createcurrent
agentDiffServClassRuleMatchIpTosBits
OBJECT-TYPE
IP TOS bits match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to iptos(8). The TOS bits are defined as all eight bits of the Service Type octet in the IPv4 header.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.13OCTET STRING (SIZE(1))read-createcurrent
agentDiffServClassRuleMatchIpTosMask
OBJECT-TYPE
IP TOS bits mask match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to iptos(8). This mask value identifies the portion of agentDiffServClassRuleMatchIpTosBits that is compared against a packet. A non-contiguous mask value is permitted.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.14OCTET STRING (SIZE(1))read-createcurrent
agentDiffServClassRuleMatchProtocolNum
OBJECT-TYPE
Protocol number match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to protocol(9).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.15Unsigned32 (0..255)read-createcurrent
agentDiffServClassRuleMatchRefClassIndex
OBJECT-TYPE
Index of the corresponding referenced class - only valid if the agentDiffServClassRuleMatchEntryType is set to refclass(10). The set of match conditions defined for the reference class are directly inherited by the current class. Restrictions: 1) The class types of both, current class and the reference class must be identical (i.e., any vs. any, or all vs. all). 2) Self-referencing of class-name is not allowed. 3) Any attempt to delete the reference class while still referenced by any class shall fail. 4) The combined match criteria of classname and reference class name must be an allowed combination based on the class type. Any subsequent changes to the reference class name match criteria must maintain this validity, or the change attempt shall fail.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.16Unsigned32read-createcurrent
agentDiffServClassRuleMatchSrcIpAddr
OBJECT-TYPE
Source IP address match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcip(11).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.17IpAddressread-createcurrent
agentDiffServClassRuleMatchSrcIpMask
OBJECT-TYPE
Source IP address mask match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcip(11). This mask value identifies the portion of agentDiffServClassRuleMatchSrcIpAddr that is compared against a packet. A non-contiguous mask value is permitted.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.18IpAddressread-createcurrent
agentDiffServClassRuleMatchSrcL4PortStart
OBJECT-TYPE
Source layer 4 port range start match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.19InetPortNumberread-createcurrent
agentDiffServClassRuleMatchSrcL4PortEnd
OBJECT-TYPE
Source layer 4 port range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.20InetPortNumberread-createcurrent
agentDiffServClassRuleMatchSrcMacAddr
OBJECT-TYPE
Source MAC address match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcmac(13).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.21MacAddressread-createcurrent
agentDiffServClassRuleMatchSrcMacMask
OBJECT-TYPE
Source MAC address mask match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcmac(13). This mask value identifies the portion of agentDiffServClassRuleMatchSrcMacAddr that is compared against a packet. A non-contiguous mask value is permitted.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.22MacAddressread-createcurrent
agentDiffServClassRuleMatchVlanId
OBJECT-TYPE
VLAN ID match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlan(14). This object is obsoleted by agentDiffServClassRuleMatchVlanIdStart and agentDiffServClassRuleMatchVlanIdEnd.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.23Unsigned32 (1..4094)read-createobsolete
agentDiffServClassRuleMatchExcludeFlag
OBJECT-TYPE
Class Rule exclude flag - when set to true(1), the match condition identified by agentDiffServClassRuleMatchEntryType is negated. This means that for a given field, every value is considered to be a match EXCEPT for the value specified in the class rule. This flag must be false(2) for an agendDiffServClassRuleMatchEntryType of refClass(10). This object must be set after the agentDiffServClassRuleMatchEntryType object, but before any other match object in this row
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.24TruthValueread-createcurrent
agentDiffServClassRuleStorageType
OBJECT-TYPE
Storage-type for this conceptual row
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.25StorageTyperead-createcurrent
agentDiffServClassRuleRowStatus
OBJECT-TYPE
The status of this conceptual row. All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.26RowStatusread-createcurrent
agentDiffServClassRuleMatchCos2
OBJECT-TYPE
Three-bit user priority field in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame used as a class-match parameter - only valid if the agentDiffServClassRuleMatchEntryType is set to cos2(15).
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.27Unsigned32 (0..7)read-createcurrent
agentDiffServClassRuleMatchEtypeKey
OBJECT-TYPE
Ethertype keyword match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to etype(16). A keyword of custom(1) requires that the agentDiffServClassRuleMatchEtypeValue object also be set.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.28INTEGER {custom(1), appletalk(2), arp(3), ibmsna(4), ipv4(5), ipv6(6), ipx(7), mplsmcast(8), mplsucast(9), netbios(10), novell(11), pppoe(12), rarp(13)}read-createcurrent
agentDiffServClassRuleMatchEtypeValue
OBJECT-TYPE
Ethertype match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to etype(16) and the agentDiffServClassRuleMatchEtypeKey is set to custom(1). The allowed value for this object is 0x0600 to 0xFFFF.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.29EtypeValueread-createcurrent
agentDiffServClassRuleMatchVlanIdStart
OBJECT-TYPE
VLAN ID range start match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlanid(17). The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer tag of a double VLAN tagged frame.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.30Unsigned32 (0..4095)read-createcurrent
agentDiffServClassRuleMatchVlanIdEnd
OBJECT-TYPE
VLAN ID range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlanid(17). The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer tag of a double VLAN tagged frame.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.31Unsigned32 (0..4095)read-createcurrent
agentDiffServClassRuleMatchVlanId2Start
OBJECT-TYPE
Secondary VLAN ID range start match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlanid2(18). The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.32Unsigned32 (0..4095)read-createcurrent
agentDiffServClassRuleMatchVlanId2End
OBJECT-TYPE
Secondary VLAN ID range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlanid2(18). The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.33Unsigned32 (0..4095)read-createcurrent
agentDiffServClassRuleMatchFlowLabel
OBJECT-TYPE
Flow label is 20-bit number that is unique to an IPv6 packet, used by end stations to signify quality-of-service handling in routers.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.34Unsigned32 (0..1048575)read-createcurrent
agentDiffServClassRuleMatchDstIpv6Prefix
OBJECT-TYPE
The Ipv6 Prefix Address configured on the Service Port.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.35Ipv6AddressPrefixread-writecurrent
agentDiffServClassRuleMatchSrcIpv6Prefix
OBJECT-TYPE
The Ipv6 Prefix Address configured on the Service Port.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.36Ipv6AddressPrefixread-writecurrent
agentDiffServClassRuleMatchDstIpv6PrefixLength
OBJECT-TYPE
The Prefix Length.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.37Integer32 (1..128)read-createcurrent
agentDiffServClassRuleMatchSrcIpv6PrefixLength
OBJECT-TYPE
The Prefix Length.
1.3.6.1.4.1.4413.1.1.3.7.2.3.1.38Integer32 (1..128)read-createcurrent
agentDiffServPolicyGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.3.7.3
agentDiffServPolicyIndexNextFree
OBJECT-TYPE
This object contains an unused value for agentDiffServPolicyIndex, or a zero to indicate that none exists.
1.3.6.1.4.1.4413.1.1.3.7.3.1Unsigned32read-onlycurrent
agentDiffServPolicyTable
OBJECT-TYPE
A table of the DiffServ policy entries.
1.3.6.1.4.1.4413.1.1.3.7.3.2not-accessiblecurrent
agentDiffServPolicyEntry
OBJECT-TYPE
Represents entry for a DiffServ policy.
1.3.6.1.4.1.4413.1.1.3.7.3.2.1not-accessiblecurrent
agentDiffServPolicyIndex
OBJECT-TYPE
The identifier for DiffServ Policy table entry.
1.3.6.1.4.1.4413.1.1.3.7.3.2.1.1Unsigned32not-accessiblecurrent
agentDiffServPolicyName
OBJECT-TYPE
Name of the policy
1.3.6.1.4.1.4413.1.1.3.7.3.2.1.2DisplayString (SIZE(1..31))read-createcurrent
agentDiffServPolicyType
OBJECT-TYPE
The policy type dictates whether inbound or outbound policy attribute statements are used in the policy definition.
1.3.6.1.4.1.4413.1.1.3.7.3.2.1.3IntfDirectionread-createcurrent
agentDiffServPolicyInstIndexNextFree
OBJECT-TYPE
This object contains an unused value for agentDiffServPolicyInstIndex, or a zero to indicate that none exists. This index is maintained on a per-policy basis.
1.3.6.1.4.1.4413.1.1.3.7.3.2.1.4Unsigned32read-onlycurrent
agentDiffServPolicyStorageType
OBJECT-TYPE
Storage-type for this conceptual row
1.3.6.1.4.1.4413.1.1.3.7.3.2.1.5StorageTyperead-createcurrent
agentDiffServPolicyRowStatus
OBJECT-TYPE
The status of this conceptual row. active(1) - this Diffserv Policy is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in agentDiffServPolicyInstTable with corresponding values of agentDiffServPolicyIndex have been deleted.
1.3.6.1.4.1.4413.1.1.3.7.3.2.1.6RowStatusread-createcurrent
agentDiffServPolicyInstTable
OBJECT-TYPE
A table of the policy-class instance entries.
1.3.6.1.4.1.4413.1.1.3.7.3.3not-accessiblecurrent
agentDiffServPolicyInstEntry
OBJECT-TYPE
Represents entry for a policy-class instance.
1.3.6.1.4.1.4413.1.1.3.7.3.3.1not-accessiblecurrent
agentDiffServPolicyInstIndex
OBJECT-TYPE
The identifier for policy-class Instance table entry within a policy.
1.3.6.1.4.1.4413.1.1.3.7.3.3.1.1Unsigned32not-accessiblecurrent
agentDiffServPolicyInstClassIndex
OBJECT-TYPE
Index of the DiffServ Class Table row, whose class definition is used as the policy class instance. The class index identifies the classifier definition used by the policy to establish an instance of that class (to which policy attributes can be attached). This is what connects a class (instance) to a policy.
1.3.6.1.4.1.4413.1.1.3.7.3.3.1.2Unsigned32read-createcurrent
agentDiffServPolicyInstAttrIndexNextFree
OBJECT-TYPE
This object contains an unused value for agentDiffServPolicyAttrIndex, or a zero to indicate that none exists. This index is maintained on a per-policy-class-instance basis.
1.3.6.1.4.1.4413.1.1.3.7.3.3.1.3Unsigned32read-onlycurrent
agentDiffServPolicyInstStorageType
OBJECT-TYPE
Storage-type for this conceptual row.
1.3.6.1.4.1.4413.1.1.3.7.3.3.1.4StorageTyperead-createcurrent
agentDiffServPolicyInstRowStatus
OBJECT-TYPE
The status of this conceptual row. active(1) - this Diffserv Policy Instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in agentDiffServPolicyAttrTable with corresponding values of agentDiffServPolicyIndex and agentDiffServPolicyInstIndex have been deleted.
1.3.6.1.4.1.4413.1.1.3.7.3.3.1.5RowStatusread-createcurrent
agentDiffServPolicyAttrTable
OBJECT-TYPE
A table of policy attribute entries
1.3.6.1.4.1.4413.1.1.3.7.3.4not-accessiblecurrent
agentDiffServPolicyAttrEntry
OBJECT-TYPE
Represents entry for policy attributes
1.3.6.1.4.1.4413.1.1.3.7.3.4.1not-accessiblecurrent
agentDiffServPolicyAttrIndex
OBJECT-TYPE
The identifier for policy-attribute entry
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.1Unsigned32not-accessiblecurrent
agentDiffServPolicyAttrStmtEntryType
OBJECT-TYPE
Policy attribute statement entry type -- this entry type is essential to determine which of the individual object(s) is defined for this policy attribute statement. This object must be created before any other policy attribute statement object in the row. The markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6), policeSinglerate(7) and policeTworate(8) values are only allowed for an agentDiffServPolicyType of in(1). The remaining values are only allowed for an agentDiffServPolicyType of out(2).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.2INTEGER {bandwidth(1), expedite(2), markCosVal(3), markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6), policeSinglerate(7), policeTworate(8), randomdrop(9), shapeAverage(10), shapePeak(11), assignQueue(12), drop(13), markCos2Val(14), redirect(15), mirror(16), markCosAsSecCos(17)}read-createcurrent
agentDiffServPolicyAttrStmtBandwidthCrate
OBJECT-TYPE
Bandwidth committed rate attribute statement value -- identifies the minimum amount of bandwidth to be reserved for the specified class instance within the policy. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.3Unsigned32read-createobsolete
agentDiffServPolicyAttrStmtBandwidthCrateUnits
OBJECT-TYPE
Bandwidth committed rate units attribute statement value -- this value determines the interpretation of the agentDiffServPolicyAttrStmtBandwidthCrate object as either kilobits-per-second or as a percentage of interface link speed. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.4INTEGER {kbps(1), percentage(2)}read-createobsolete
agentDiffServPolicyAttrStmtExpediteCrate
OBJECT-TYPE
Expedited (bandwidth) committed rate attribute statement value -- it identifies the maximum guaranteed amount of bandwidth to be reserved for the specified class instance within the policy. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.5Unsigned32read-createobsolete
agentDiffServPolicyAttrStmtExpediteCrateUnits
OBJECT-TYPE
Expedited (bandwidth) committed rate units attribute statement value -- determines the interpretation of the agentDiffServPolicyAttrStmtExpediteCrate object as either kilobits-per-second or as a percentage of interface link speed. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.6INTEGER {kbps(1), percentage(2)}read-createobsolete
agentDiffServPolicyAttrStmtExpediteCburst
OBJECT-TYPE
Expedited (bandwidth) committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.7QosBurstSizeread-createobsolete
agentDiffServPolicyAttrStmtMarkCosVal
OBJECT-TYPE
Three-bit user priority field value in the 802.1Q tag header of a tagged Ethernet frame, marked as part of the inbound policy for a class instance. For frames containing a double VLAN tag, this field is located in the first/outer tag. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to markCosVal(3).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.8Unsigned32 (0..7)read-createcurrent
agentDiffServPolicyAttrStmtMarkIpDscpVal
OBJECT-TYPE
Specified IP DSCP value to mark in all inbound packets belonging to the class-instance. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to markIpDscpVal(4).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.9Unsigned32 (0..63)read-createcurrent
agentDiffServPolicyAttrStmtMarkIpPrecedenceVal
OBJECT-TYPE
Specified IP Precedence value to mark in all inbound packets belonging to the class-instance. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to markIpPrecedenceVal(5).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.10Unsigned32 (0..7)read-createcurrent
agentDiffServPolicyAttrStmtPoliceConformAct
OBJECT-TYPE
Policing conform action attribute statement value -- determines the action taken on conforming traffic for the policing style (simple,singlerate,tworate) currently configured for the specified class instance within the policy. The default conform action is send(3). This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.11INTEGER {drop(1), markdscp(2), markprec(3), send(4), markcos(5), markcos2(6), markcosAsSecCos(7)}read-createcurrent
agentDiffServPolicyAttrStmtPoliceConformVal
OBJECT-TYPE
Policing conform value attribute statement -- used to mark conforming packets when the conform action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.12Unsigned32 (0..63)read-createcurrent
agentDiffServPolicyAttrStmtPoliceExceedAct
OBJECT-TYPE
Policing exceed action attribute statement value -- determines the action taken on excess traffic for the policing style (singlerate, tworate) currently configured for the specified class instance within the policy. The default exceed action is drop(1). This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.13INTEGER {drop(1), markdscp(2), markprec(3), send(4), markcos(5), markcos2(6), markcosAsSecCos(7)}read-createcurrent
agentDiffServPolicyAttrStmtPoliceExceedVal
OBJECT-TYPE
Policing exceed value attribute statement -- used to mark excess packets when the exceed action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value This is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.14Unsigned32 (0..63)read-createcurrent
agentDiffServPolicyAttrStmtPoliceNonconformAct
OBJECT-TYPE
Policing non-conform action attribute statement value -- determines the action taken on nonconforming traffic for the policing style (simple, singlerate,tworate) currently configured for the specified class instance within the policy. The default non-conform action is drop(1). This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.15INTEGER {drop(1), markdscp(2), markprec(3), send(4), markcos(5), markcos2(6), markcosAsSecCos(7)}read-createcurrent
agentDiffServPolicyAttrStmtPoliceNonconformVal
OBJECT-TYPE
Policing non-conform value attribute statement -- used to mark nonconforming packets when the nonconform action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.16Unsigned32 (0..63)read-createcurrent
agentDiffServPolicyAttrStmtPoliceSimpleCrate
OBJECT-TYPE
Simple policing committed rate attribute statement value, specified in kbps. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.17Unsigned32read-createcurrent
agentDiffServPolicyAttrStmtPoliceSimpleCburst
OBJECT-TYPE
Simple policing committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.18QosBurstSizeread-createcurrent
agentDiffServPolicyAttrStmtPoliceSinglerateCrate
OBJECT-TYPE
Single-rate policing committed rate attribute statement value, specified in kbps. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.19Unsigned32read-createcurrent
agentDiffServPolicyAttrStmtPoliceSinglerateCburst
OBJECT-TYPE
Single-rate policing committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.20QosBurstSizeread-createcurrent
agentDiffServPolicyAttrStmtPoliceSinglerateEburst
OBJECT-TYPE
Single-rate policing excess burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.21QosBurstSizeread-createcurrent
agentDiffServPolicyAttrStmtPoliceTworateCrate
OBJECT-TYPE
Two-rate policing committed rate attribute statement value, specified in kbps. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.22Unsigned32read-createcurrent
agentDiffServPolicyAttrStmtPoliceTworateCburst
OBJECT-TYPE
Two-rate policing committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.23QosBurstSizeread-createcurrent
agentDiffServPolicyAttrStmtPoliceTworatePrate
OBJECT-TYPE
Two-rate policing peak rate attribute statement value, specified in kbps. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.24Unsigned32read-createcurrent
agentDiffServPolicyAttrStmtPoliceTworatePburst
OBJECT-TYPE
Two-rate policing peak burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.25QosBurstSizeread-createcurrent
agentDiffServPolicyAttrStmtRandomdropMinThresh
OBJECT-TYPE
Random drop minimum threshold attribute statement value -- the average queue depth minimum threshold in bytes used by the WRED algorithm. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.26Unsigned32 (1..250000)read-createobsolete
agentDiffServPolicyAttrStmtRandomdropMaxThresh
OBJECT-TYPE
Random drop maximum threshold attribute statement value -- the average queue depth maximum threshold in bytes used by the WRED algorithm. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.27Unsigned32 (1..500000)read-createobsolete
agentDiffServPolicyAttrStmtRandomdropMaxDropProb
OBJECT-TYPE
Random drop maximum drop probability attribute statement value -- the packet drop probability when the queue depth average reaches its maximum threshold. It is expressed as a percentage, and is an integer from 0 to 100. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.28Unsigned32 (0..100)read-createobsolete
agentDiffServPolicyAttrStmtRandomdropSamplingRate
OBJECT-TYPE
Random drop sampling rate attribute statement value -- the period at which the queue depth is sampled for computing an average, expressed in microseconds. This value is an integer from 0 to 1000000, with a default value of 0 (meaning per packet sampling). This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.29Unsigned32 (0..1000000)read-createobsolete
agentDiffServPolicyAttrStmtRandomdropDecayExponent
OBJECT-TYPE
Random drop decay exponent attribute statement value -- determines how quickly the average queue length calculation decays over time, with a higher number causing a slower decay. This value is an integer from 0 to 16, with a default of 9. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.30Unsigned32 (0..16)read-createobsolete
agentDiffServPolicyAttrStmtShapeAverageCrate
OBJECT-TYPE
Average-rate shaping committed rate attribute statement value, specified in kbps -- used to establish average rate traffic shaping for the specified class , which limits transmissions for the class to the committed information rate, with any excess traffic delayed via queueing. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to shapeAverage(10).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.31Unsigned32read-createobsolete
agentDiffServPolicyAttrStmtShapePeakCrate
OBJECT-TYPE
Peak-rate shaping committed rate attribute statement value, specified in kbps -- used to establish peak rate traffic shaping for the specified class , which allows transmissions for the class to exceed the committed information rate by sending excess traffic with the understanding that it could be dropped by a downstream network element. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to shapePeak(11).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.32Unsigned32read-createobsolete
agentDiffServPolicyAttrStmtShapePeakPrate
OBJECT-TYPE
Peak-rate shaping peak rate attribute statement value, specified in kbps -- used to establish peak rate traffic shaping for the specified class, which allows transmissions for the class to exceed the committed information rate by sending excess traffic with the understanding that it could be dropped by a downstream network element. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to shapePeak(11).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.33Unsigned32read-createobsolete
agentDiffServPolicyAttrStorageType
OBJECT-TYPE
Storage-type for this conceptual row.
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.34StorageTyperead-createcurrent
agentDiffServPolicyAttrRowStatus
OBJECT-TYPE
The status of this conceptual row. active(1) - this Diffserv Policy Attribute is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'.
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.35RowStatusread-createcurrent
agentDiffServPolicyAttrStmtAssignQueueId
OBJECT-TYPE
Queue identifier to which all inbound packets belonging to this class-instance are directed. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to assignQueue(12).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.36Unsigned32read-createcurrent
agentDiffServPolicyAttrStmtDrop
OBJECT-TYPE
Flag to indicate that all inbound packets belonging to this class-instance are dropped at ingress. This attribute is only valid if the agentDiffServPolicyAttrStmtEntryType is set to drop(13).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.37TruthValueread-onlycurrent
agentDiffServPolicyAttrStmtMarkCos2Val
OBJECT-TYPE
Three-bit user priority field value in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame, marked as part of the inbound policy for a class instance. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to markCos2Val(14).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.38Unsigned32 (0..7)read-createcurrent
agentDiffServPolicyAttrStmtPoliceColorConformIndex
OBJECT-TYPE
Index of the DiffServ Class Table row whose class definition is used to specify the policing color conform mode and value. This identifies incoming traffic categorized as 'green' packets in the network. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8). The DiffServ class referred to by this object must comply with the following restrictions: 1) Contains only a single, non-excluded match condition identifying one of the following fields: COS, IP DSCP, IP Precedence, or Secondary COS, in accordance with platform support capabilities. This is represented by an agentDiffServClassRuleMatchEntryType value of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively. 2) Must not conflict with any (non-excluded) match conditions in the classifier used for this policy-class instance, as indicated by the agentDiffServPolicyInstClassIndex object. 3) The color conform mode and value identified by this class index must not be the same as an existing color-aware exceed mode and value defined by the agentDiffServPolicyAttrStmtPoliceColorExceedIndex object. A class index value of 0 for this object indicates conform color awareness is not being used (e.g. color-blind mode). Setting this object to 0 causes the agentDiffServPolicyAttrStmtPoliceColorExceedIndex object to be set to 0 as well.
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.39Unsigned32read-createcurrent
agentDiffServPolicyAttrStmtPoliceColorConformMode
OBJECT-TYPE
Policing color conform mode -- indicates the color awareness mode of conforming traffic for the policing style (simple, singlerate, or tworate) currently configured for the specified class instance within the policy. The default value is blind(1). Any value other than blind(1) denotes the packet field to check for the existing conform color marking, which is compared to the agentDiffServPolicyAttrStmtPoliceColorConformVal object value. Packets matching this specification are considered to be colored 'green'. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of policeSimple(6), policeSinglerate(7), or policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.40INTEGER {blind(1), cos(2), cos2(3), ipdscp(4), ipprec(5)}read-onlycurrent
agentDiffServPolicyAttrStmtPoliceColorConformVal
OBJECT-TYPE
Policing color conform value -- indicates the color awareness packet mark value of conforming traffic for the policing style (simple, singlerate, or tworate) currently configured for the specified class instance within the policy. For the color conform field indicated by agentDiffServPolicyAttrStmtPoliceColorConformMode, packets containing this value are considered to be colored 'green'. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of policeSimple(6), policeSinglerate(7), or policeTworate(8), and agentDiffServPolicyAttrStmtPoliceColorConformMode values of cos(2), cos2(3), ipdscp(4), or ipprec(5).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.41Unsigned32read-onlycurrent
agentDiffServPolicyAttrStmtPoliceColorExceedIndex
OBJECT-TYPE
Index of the DiffServ Class Table row whose class definition is used to specify the policing color exceed mode and value. This identifies incoming traffic categorized as 'yellow' packets in the network. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or policeTworate(8). The DiffServ class referred to by this object must comply with the following restrictions: 1) Contains only a single, non-excluded match condition identifying one of the following fields: COS, IP DSCP, IP Precedence, or Secondary COS, in accordance with platform support capabilities. This is represented by an agentDiffServClassRuleMatchEntryType value of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively. 2) Must not conflict with any (non-excluded) match conditions in the classifier used for this policy-class instance, as indicated by the agentDiffServPolicyInstClassIndex object. 3) The color exceed mode and value identified by this class index must not be the same as an existing color-aware exceed mode and value defined by the agentDiffServPolicyAttrStmtPoliceColorConformIndex object. A class index value of 0 for this object indicates exceed color awareness is not being used. When the agentDiffServPolicyAttrStmtPoliceColorConformIndex object is 0, indicating color-blind operation, this object must also be 0. When a non-0 value is used for the agentDiffServPolicyAttrStmtPoliceColorConformIndex object, this object may remain set to 0 if exceed color awareness is not desired, or may be set to an appropriate class index value to activate exceed color aware mode.
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.42Unsigned32read-createcurrent
agentDiffServPolicyAttrStmtPoliceColorExceedMode
OBJECT-TYPE
Policing color exceed mode -- indicates the color awareness mode of exceeding traffic for the policing style (singlerate or tworate) currently configured for the specified class instance within the policy. The default value is blind(1). Any value other than blind(1) or unused(6) denotes the packet field to check for the existing exceed color marking, which is compared to the agentDiffServPolicyAttrStmtPoliceColorExceedVal object value. Packets matching this specification are considered to be colored 'yellow'. Use of exceed color awareness is optional, and this field is set to unused(6) when color conform aware policing is used but the color exceed value is not used. When agentDiffServPolicyAttrStmtPoliceColorConformMode value is blind(1), this object is blind(1) as well. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of policeSinglerate(7) or policeTworate(8).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.43INTEGER {blind(1), cos(2), cos2(3), ipdscp(4), ipprec(5), unused(6)}read-onlycurrent
agentDiffServPolicyAttrStmtPoliceColorExceedVal
OBJECT-TYPE
Policing color exceed value -- indicates the color awareness packet mark value of exceeding traffic for the policing style (singlerate or tworate) currently configured for the specified class instance within the policy. For the color exceed field indicated by agentDiffServPolicyAttrStmtPoliceColorExceedMode, packets containing this value are considered to be colored 'yellow'. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of policeSinglerate(7) or policeTworate(8), and agentDiffServPolicyAttrStmtPoliceColorExceedMode values of cos(2), cos2(3), ipdscp(4), or ipprec(5).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.44Unsigned32read-onlycurrent
agentDiffServPolicyAttrStmtRedirectIntf
OBJECT-TYPE
External interface number to which all inbound packets belonging to this class-instance are redirected. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to redirect(15).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.45InterfaceIndexread-createcurrent
agentDiffServPolicyAttrStmtMirrorIntf
OBJECT-TYPE
External interface number to which all inbound packets belonging to this class-instance are mirrored. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to mirror(16).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.46InterfaceIndexread-createcurrent
agentDiffServPolicyAttrStmtMarkCosAsSecCos
OBJECT-TYPE
Flag to indicate that all inbound packets belonging to this class-instance are marked with secondary cos at ingress. This attribute is only valid if the agentDiffServPolicyAttrStmtEntryType is set to markCosAsSecCos(17).
1.3.6.1.4.1.4413.1.1.3.7.3.4.1.47TruthValueread-onlycurrent
agentDiffServPolicyPerfInTable
OBJECT-TYPE
A table of inbound policy-class performance entries
1.3.6.1.4.1.4413.1.1.3.7.3.5not-accessiblecurrent
agentDiffServPolicyPerfInEntry
OBJECT-TYPE
Represents entry for the performance attributes of the associated inbound policy-class instance
1.3.6.1.4.1.4413.1.1.3.7.3.5.1not-accessiblecurrent
agentDiffServPolicyPerfInOfferedOctets
OBJECT-TYPE
Offered octets count for the inbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.5.1.1Counter32read-onlycurrent
agentDiffServPolicyPerfInOfferedPackets
OBJECT-TYPE
Offered packets count for the inbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.5.1.2Counter32read-onlycurrent
agentDiffServPolicyPerfInDiscardedOctets
OBJECT-TYPE
Discarded octets count for the inbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.5.1.3Counter32read-onlycurrent
agentDiffServPolicyPerfInDiscardedPackets
OBJECT-TYPE
Discarded packets count for the inbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.5.1.4Counter32read-onlycurrent
agentDiffServPolicyPerfInHCOfferedOctets
OBJECT-TYPE
Offered octets high capacity count for the inbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.5.1.5Counter64read-onlycurrent
agentDiffServPolicyPerfInHCOfferedPackets
OBJECT-TYPE
Offered packets high capacity count for the inbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.5.1.6Counter64read-onlycurrent
agentDiffServPolicyPerfInHCDiscardedOctets
OBJECT-TYPE
Discarded octets high capacity count for the inbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.5.1.7Counter64read-onlycurrent
agentDiffServPolicyPerfInHCDiscardedPackets
OBJECT-TYPE
Discarded packets high capacity count for the inbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.5.1.8Counter64read-onlycurrent
agentDiffServPolicyPerfInStorageType
OBJECT-TYPE
Storage-type for this conceptual row.
1.3.6.1.4.1.4413.1.1.3.7.3.5.1.9StorageTyperead-onlycurrent
agentDiffServPolicyPerfInRowStatus
OBJECT-TYPE
The status of this conceptual row.
1.3.6.1.4.1.4413.1.1.3.7.3.5.1.10RowStatusread-onlycurrent
agentDiffServPolicyPerfOutTable
OBJECT-TYPE
A table of outbound policy-class performance entries
1.3.6.1.4.1.4413.1.1.3.7.3.6not-accessiblecurrent
agentDiffServPolicyPerfOutEntry
OBJECT-TYPE
Represents entry for the performance attributes of the associated outbound policy-class instance
1.3.6.1.4.1.4413.1.1.3.7.3.6.1not-accessiblecurrent
agentDiffServPolicyPerfOutTailDroppedOctets
OBJECT-TYPE
Tail-dropped octets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.1Counter32read-onlyobsolete
agentDiffServPolicyPerfOutTailDroppedPackets
OBJECT-TYPE
Tail-dropped packets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.2Counter32read-onlyobsolete
agentDiffServPolicyPerfOutRandomDroppedOctets
OBJECT-TYPE
Random-dropped octets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.3Counter32read-onlyobsolete
agentDiffServPolicyPerfOutRandomDroppedPackets
OBJECT-TYPE
Random-dropped packets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.4Counter32read-onlyobsolete
agentDiffServPolicyPerfOutShapeDelayedOctets
OBJECT-TYPE
Shape-delayed octets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.5Counter32read-onlyobsolete
agentDiffServPolicyPerfOutShapeDelayedPackets
OBJECT-TYPE
Shape-delayed packets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.6Counter32read-onlyobsolete
agentDiffServPolicyPerfOutSentOctets
OBJECT-TYPE
Sent octets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.7Counter32read-onlyobsolete
agentDiffServPolicyPerfOutSentPackets
OBJECT-TYPE
Sent packets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.8Counter32read-onlyobsolete
agentDiffServPolicyPerfOutHCTailDroppedOctets
OBJECT-TYPE
Tail-dropped octets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.9Counter64read-onlyobsolete
agentDiffServPolicyPerfOutHCTailDroppedPackets
OBJECT-TYPE
Tail-dropped packets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.10Counter64read-onlyobsolete
agentDiffServPolicyPerfOutHCRandomDroppedOctets
OBJECT-TYPE
Random-dropped octets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.11Counter64read-onlyobsolete
agentDiffServPolicyPerfOutHCRandomDroppedPackets
OBJECT-TYPE
Random-dropped packets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.12Counter64read-onlyobsolete
agentDiffServPolicyPerfOutHCShapeDelayedOctets
OBJECT-TYPE
Shape-delayed octets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.13Counter64read-onlyobsolete
agentDiffServPolicyPerfOutHCShapeDelayedPackets
OBJECT-TYPE
Shape-delayed packets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.14Counter64read-onlyobsolete
agentDiffServPolicyPerfOutHCSentOctets
OBJECT-TYPE
Sent octets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.15Counter64read-onlyobsolete
agentDiffServPolicyPerfOutHCSentPackets
OBJECT-TYPE
Sent packets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.16Counter64read-onlyobsolete
agentDiffServPolicyPerfOutStorageType
OBJECT-TYPE
Storage-type for this conceptual row.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.17StorageTyperead-onlycurrent
agentDiffServPolicyPerfOutRowStatus
OBJECT-TYPE
The status of this conceptual row.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.18RowStatusread-onlycurrent
agentDiffServPolicyPerfOutOfferedOctets
OBJECT-TYPE
Offered octets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.19Counter32read-onlycurrent
agentDiffServPolicyPerfOutOfferedPackets
OBJECT-TYPE
Offered packets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.20Counter32read-onlycurrent
agentDiffServPolicyPerfOutDiscardedOctets
OBJECT-TYPE
Discarded octets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.21Counter32read-onlycurrent
agentDiffServPolicyPerfOutDiscardedPackets
OBJECT-TYPE
Discarded packets count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.22Counter32read-onlycurrent
agentDiffServPolicyPerfOutHCOfferedOctets
OBJECT-TYPE
Offered octets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.23Counter64read-onlycurrent
agentDiffServPolicyPerfOutHCOfferedPackets
OBJECT-TYPE
Offered packets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.24Counter64read-onlycurrent
agentDiffServPolicyPerfOutHCDiscardedOctets
OBJECT-TYPE
Discarded octets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.25Counter64read-onlycurrent
agentDiffServPolicyPerfOutHCDiscardedPackets
OBJECT-TYPE
Discarded packets high capacity count for the outbound policy-class instance performance entry.
1.3.6.1.4.1.4413.1.1.3.7.3.6.1.26Counter64read-onlycurrent
agentDiffServServiceGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.3.7.4
agentDiffServServiceTable
OBJECT-TYPE
A table of the service entries.
1.3.6.1.4.1.4413.1.1.3.7.4.1not-accessiblecurrent
agentDiffServServiceEntry
OBJECT-TYPE
Represents entry for policy assigned to an interface in a particular direction.
1.3.6.1.4.1.4413.1.1.3.7.4.1.1not-accessiblecurrent
agentDiffServServiceIfIndex
OBJECT-TYPE
External interface number of the interface to which policy is assigned.
1.3.6.1.4.1.4413.1.1.3.7.4.1.1.1InterfaceIndexnot-accessiblecurrent
agentDiffServServiceIfDirection
OBJECT-TYPE
Interface direction to which the policy is assigned.
1.3.6.1.4.1.4413.1.1.3.7.4.1.1.2IntfDirectionnot-accessiblecurrent
agentDiffServServicePolicyIndex
OBJECT-TYPE
Index of the Policy Table row whose policy definition is attached to the interface in the specified direction.
1.3.6.1.4.1.4413.1.1.3.7.4.1.1.3Unsigned32read-createcurrent
agentDiffServServiceIfOperStatus
OBJECT-TYPE
The current operational state of the DiffServ service interface. If agentDiffServGenStatusAdminMode is disable(2) then agentDiffServServiceIfOperStatus should be down(2). If agentDiffServServiceGenStatusAdminMode is changed to enable(1) then agentDiffServServiceIfOperStatus should change to up(1) if the service interface is ready to send and receive DiffServ traffic; it should remain in the down(2) state if the underlying interface hardware is not in a link up condition, if the policy definition represented by agentDiffServServicePolicyIndex is incompatible with the interface (e.g., requires more bandwidth than the current capacity of the interface), or if the policy definition is considered to be incomplete (e.g., one or more composite rows is not in the active(1) state).
1.3.6.1.4.1.4413.1.1.3.7.4.1.1.4INTEGER {up(1), down(2)}read-onlycurrent
agentDiffServServiceStorageType
OBJECT-TYPE
Storage-type for this conceptual row
1.3.6.1.4.1.4413.1.1.3.7.4.1.1.5StorageTyperead-createcurrent
agentDiffServServiceRowStatus
OBJECT-TYPE
The status of this conceptual row. active(1) - Diffserv is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'.
1.3.6.1.4.1.4413.1.1.3.7.4.1.1.6RowStatusread-createcurrent
agentDiffServServicePerfTable
OBJECT-TYPE
A table of service performance entries.
1.3.6.1.4.1.4413.1.1.3.7.4.2not-accessiblecurrent
agentDiffServServicePerfEntry
OBJECT-TYPE
Represents a service performance entry.
1.3.6.1.4.1.4413.1.1.3.7.4.2.1not-accessiblecurrent
agentDiffServServicePerfOfferedOctets
OBJECT-TYPE
Offered octets count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.1Counter32read-onlycurrent
agentDiffServServicePerfOfferedPackets
OBJECT-TYPE
Offered packets count for specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.2Counter32read-onlycurrent
agentDiffServServicePerfDiscardedOctets
OBJECT-TYPE
Discarded octets count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.3Counter32read-onlycurrent
agentDiffServServicePerfDiscardedPackets
OBJECT-TYPE
Discarded packets count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.4Counter32read-onlycurrent
agentDiffServServicePerfSentOctets
OBJECT-TYPE
Sent octets count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.5Counter32read-onlycurrent
agentDiffServServicePerfSentPackets
OBJECT-TYPE
Sent packets count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.6Counter32read-onlycurrent
agentDiffServServicePerfHCOfferedOctets
OBJECT-TYPE
Offered octets high capacity count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.7Counter64read-onlycurrent
agentDiffServServicePerfHCOfferedPackets
OBJECT-TYPE
Offered packets high capacity count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.8Counter64read-onlycurrent
agentDiffServServicePerfHCDiscardedOctets
OBJECT-TYPE
Discarded octets high capacity count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.9Counter64read-onlycurrent
agentDiffServServicePerfHCDiscardedPackets
OBJECT-TYPE
Discarded packets high capacity count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.10Counter64read-onlycurrent
agentDiffServServicePerfHCSentOctets
OBJECT-TYPE
Sent octets high capacity count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.11Counter64read-onlycurrent
agentDiffServServicePerfHCSentPackets
OBJECT-TYPE
Sent packets high capacity count for the specified service interface and direction
1.3.6.1.4.1.4413.1.1.3.7.4.2.1.12Counter64read-onlycurrent