FASTPATH-NSF-MIB
- Last updated
- 2009-04-23 00:00
- Organization
- Broadcom Corporation
- Revisions
- 2009-04-23 00:00
- Namespace
- broadcom
- Source file
FASTPATH-NSF-MIB- Digest
sha256:de0dfcb45bf50bf067f070965bb04d3a7bea288ad2c5c6299a763b4808dbf7fc
Description
This MIB defines the objects used for FastPath to configure and report information and status of NSF features.
Contact
Customer Support Postal: Broadcom Corporation 100 Perimeter Park Dr., Suite H Morrisville, NC 27560 Tel: +1 919 865 2700
Imports
| From | Symbols |
|---|---|
| BROADCOM-REF-MIB | fastPath |
| FASTPATH-INVENTORY-MIB | agentInventoryUnitEntry, agentInventoryUnitNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BROADCOM-REF-MIB FASTPATH-INVENTORY-MIB FASTPATH-NSF-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| agentNsfTraps OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.46.0 | |||
| agentNsfUnitTable OBJECT-TYPE A table of Per-Unit configuration objects for NSF. | 1.3.6.1.4.1.4413.1.1.46.1 | not-accessible | current | |
| agentNsfUnitEntry OBJECT-TYPE Each Instance corresponds with a different unit managed by this agent. | 1.3.6.1.4.1.4413.1.1.46.1.1 | not-accessible | current | |
| agentNsfUnitSupport OBJECT-TYPE Indicates if the unit supports the NSF feature. | 1.3.6.1.4.1.4413.1.1.46.1.1.1 | TruthValue | read-only | current |
| agentNsfGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.46.2 | |||
| agentNsfAdminStatus OBJECT-TYPE Controls whether NSF is enabled on the unit/stack. | 1.3.6.1.4.1.4413.1.1.46.2.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentNsfOperStatus OBJECT-TYPE Indicates whether NSF is enabled on the unit/stack. | 1.3.6.1.4.1.4413.1.1.46.2.2 | INTEGER {enable(1), disable(2)} | read-only | current |
| agentNsfLastStartupReason OBJECT-TYPE The type of activation that caused the software to start the last time. unknown: The switch rebooted for an unknown reason. power-on: The switch rebooted. This could have been caused by a power cycle or an administrative 'Reload' command. warm-admin-move: The administrator issued a command for the stand-by manager to take over. cold-admin-move: The administrator issued a command for the stand-by manager to take over, but the system was not ready for a warm-failover. warm-auto-restart: The primary management card restarted due to a failure, and the system executed a nonstop forwarding failover. cold-auto-restart: The system switched from the active manager to the backup manager and was unable to maintain user data traffic. This is usually caused by multiple failures occurring close together | 1.3.6.1.4.1.4413.1.1.46.2.3 | INTEGER {unknown(1), power-on(2), warm-admin-move(3), cold-admin-move(4), warm-auto-restart(5), cold-auto-restart(6)} | read-only | current |
| agentNsfTimeSinceLastRestart OBJECT-TYPE Time since the current management card became the active management card. | 1.3.6.1.4.1.4413.1.1.46.2.4 | TimeTicks | read-only | current |
| agentNsfRestartInProgress OBJECT-TYPE Whether a restart is in progress. A restart is not considered complete until all hardware tables have been fully reconciled. | 1.3.6.1.4.1.4413.1.1.46.2.5 | TruthValue | read-only | current |
| agentNsfWarmRestartReady OBJECT-TYPE Whether the initial full checkpoint has finished. | 1.3.6.1.4.1.4413.1.1.46.2.6 | TruthValue | read-only | current |
| agentNsfBackupConfigurationAge OBJECT-TYPE Age of the configuration on the backup unit. The time since the running configuration was last copied to the backup unit. | 1.3.6.1.4.1.4413.1.1.46.2.7 | TimeTicks | read-only | current |
| agentNsfInitiateFailover OBJECT-TYPE Triggers an administrative failover to the backup unit. | 1.3.6.1.4.1.4413.1.1.46.2.8 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentCheckpointStatsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.46.3 | |||
| agentCheckpointClearStatistics OBJECT-TYPE When set to enable(1), resets checkpoint statistics. | 1.3.6.1.4.1.4413.1.1.46.3.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentCheckpointMessages OBJECT-TYPE Total number of checkpoint messages sent. | 1.3.6.1.4.1.4413.1.1.46.3.2 | Counter32 | read-only | current |
| agentCheckpointBytes OBJECT-TYPE Size in bytes of the total ammount of checkpoint messages sent. | 1.3.6.1.4.1.4413.1.1.46.3.3 | Counter32 | read-only | current |
| agentCheckpointTimeSinceCountersCleared OBJECT-TYPE Indicates how long since the Checkpoint counters have been cleared. | 1.3.6.1.4.1.4413.1.1.46.3.4 | TimeTicks | read-only | current |
| agentCheckpointMessageRateInterval OBJECT-TYPE Indicates the duration in seconds of the message rate interval. | 1.3.6.1.4.1.4413.1.1.46.3.5 | Unsigned32 | read-only | current |
| agentCheckpointMessageRate OBJECT-TYPE Number of checkpoint messages received in the last interval defined by agentCheckpointMessageRateInterval. | 1.3.6.1.4.1.4413.1.1.46.3.6 | Gauge32 | read-only | current |
| agentCheckpointHighestMessageRate OBJECT-TYPE Highest number of checkpoint messages received in an interval defined by agentCheckpointMessageRateInterval. | 1.3.6.1.4.1.4413.1.1.46.3.7 | Gauge32 | read-only | current |
| agentNsfOspfGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.46.4 | |||
| agentNsfOspfSupportMode OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.46.4.1 | INTEGER {none(1), planned(2), always(3)} | read-write | current |
| agentNsfOspfRestartInterval OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.46.4.2 | Unsigned32 | read-write | current |
| agentNsfOspfRestartStatus OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.46.4.3 | INTEGER {unknown(1), not-restarting(2), planned-restart(3), unplanned-restart(4)} | read-only | current |
| agentNsfOspfRestartAge OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.46.4.4 | TimeTicks | read-only | current |
| agentNsfOspfRestartExitReason OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.46.4.5 | INTEGER {none(1), in-progress(2), completed(3), timed-out(4), topology-change(5), manual-clear(6)} | read-only | current |
| agentNsfOspfHelperSupportMode OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.46.4.6 | INTEGER {none(1), planned(2), always(3)} | read-write | current |
| agentNsfOspfHelperStrictLSAChecking OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.46.4.7 | INTEGER {enable(1), disable(2)} | read-write | current |
Notifications
| Name | OID | Status |
|---|---|---|
| agentNsfStackRestartComplete NOTIFICATION-TYPE Sent when a the stack finishes restarting after a failover. | 1.3.6.1.4.1.4413.1.1.46.0.1 | current |