MIBs Depot

FASTPATH-DHCPSERVER-PRIVATE-MIB

Last updated
2007-05-23 00:00
Organization
Broadcom Corporation
Revisions
2007-05-23 00:00
Namespace
broadcom
Source file
FASTPATH-DHCPSERVER-PRIVATE-MIB
Digest
sha256:c0612b1d99f424b22e2f3658f5cbf0a9733b9218f0907c7c9836cce935ec1bb9

Description

The Broadcom Private MIB for FASTPATH DHCP Server

Contact

Customer Support Postal: Broadcom Corporation 100, Perimeter Park Drive., Suite H Morrisville, NC 27560 Tel: +1 919 865 2700

Imports

FromSymbols
BROADCOM-REF-MIBfastPath
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, RowPointer, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BROADCOM-REF-MIB
FASTPATH-DHCPSERVER-PRIVATE-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
agentDhcpServerGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.12.1
agentDhcpServerAdminMode
OBJECT-TYPE
Admin-mode of the DHCP Server.
1.3.6.1.4.1.4413.1.1.12.1.1INTEGER {enable(1), disable(2)}read-writecurrent
agentDhcpServerPingPktNos
OBJECT-TYPE
The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation .
1.3.6.1.4.1.4413.1.1.12.1.2INTEGER (0 | 2..10)read-writecurrent
agentDhcpServerAutomaticBindingsNos
OBJECT-TYPE
The no. of IP addresses that have been assigned automatically.
1.3.6.1.4.1.4413.1.1.12.1.3Counter32read-onlycurrent
agentDhcpServerExpiredBindingsNos
OBJECT-TYPE
The no. of expired leases.
1.3.6.1.4.1.4413.1.1.12.1.4Counter32read-onlycurrent
agentDhcpServerMalformedMessagesReceived
OBJECT-TYPE
The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server.
1.3.6.1.4.1.4413.1.1.12.1.5Counter32read-onlycurrent
agentDhcpServerDISCOVERMessagesReceived
OBJECT-TYPE
The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server.
1.3.6.1.4.1.4413.1.1.12.1.6Counter32read-onlycurrent
agentDhcpServerREQUESTMessagesReceived
OBJECT-TYPE
The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server.
1.3.6.1.4.1.4413.1.1.12.1.7Counter32read-onlycurrent
agentDhcpServerDECLINEMessagesReceived
OBJECT-TYPE
The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server.
1.3.6.1.4.1.4413.1.1.12.1.8Counter32read-onlycurrent
agentDhcpServerRELEASEMessagesReceived
OBJECT-TYPE
The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server.
1.3.6.1.4.1.4413.1.1.12.1.9Counter32read-onlycurrent
agentDhcpServerINFORMMessagesReceived
OBJECT-TYPE
The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server.
1.3.6.1.4.1.4413.1.1.12.1.10Counter32read-onlycurrent
agentDhcpServerOFFERMessagesSent
OBJECT-TYPE
The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server.
1.3.6.1.4.1.4413.1.1.12.1.11Counter32read-onlycurrent
agentDhcpServerACKMessagesSent
OBJECT-TYPE
The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server.
1.3.6.1.4.1.4413.1.1.12.1.12Counter32read-onlycurrent
agentDhcpServerNAKMessagesSent
OBJECT-TYPE
The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server.
1.3.6.1.4.1.4413.1.1.12.1.13Counter32read-onlycurrent
agentDhcpServerClearStatistics
OBJECT-TYPE
Clears the DHCP server statistics.
1.3.6.1.4.1.4413.1.1.12.1.14INTEGER {enable(1), disable(2)}read-writecurrent
agentDhcpServerBootpAutomatic
OBJECT-TYPE
Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools.
1.3.6.1.4.1.4413.1.1.12.1.15INTEGER {enable(1), disable(2)}read-writecurrent
agentDhcpServerPoolConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.12.2
agentDhcpServerPoolNameCreate
OBJECT-TYPE
A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of agentDhcpServerPoolConfigTable. For this reason the get operation on object agentDhcpServerPoolNameCreate becomes insignificant.
1.3.6.1.4.1.4413.1.1.12.2.1DisplayString (SIZE(0 | 1..31))read-writecurrent
agentDhcpServerPoolConfigTable
OBJECT-TYPE
A table of the DHCP Server Pool configuration entries.
1.3.6.1.4.1.4413.1.1.12.2.2not-accessiblecurrent
agentDhcpServerPoolConfigEntry
OBJECT-TYPE
Represents entry for a Dhcp server pool.
1.3.6.1.4.1.4413.1.1.12.2.2.1not-accessiblecurrent
agentDhcpServerPoolIndex
OBJECT-TYPE
The Pool Index, which 'll be used as index for the PoolConfig Table.
1.3.6.1.4.1.4413.1.1.12.2.2.1.1Unsigned32 (1..512)read-onlycurrent
agentDhcpServerPoolName
OBJECT-TYPE
The name of the DHCP Address pool. This value cannot be modified
1.3.6.1.4.1.4413.1.1.12.2.2.1.2DisplayString (SIZE(1..31))read-onlycurrent
agentDhcpServerPoolDefRouter
OBJECT-TYPE
This specifies the default-router list(each default-router is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
1.3.6.1.4.1.4413.1.1.12.2.2.1.3DisplayStringread-writecurrent
agentDhcpServerPoolDNSServer
OBJECT-TYPE
This specifies the DNS IP servers(each DNS IP server is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
1.3.6.1.4.1.4413.1.1.12.2.2.1.4DisplayStringread-writecurrent
agentDhcpServerPoolLeaseTime
OBJECT-TYPE
This specifies the duration of the lease(in minutes) for an IP address that is assigened from a DHCP server to a DHCP client. For infinite leases, lease-time value will be set to 86400.
1.3.6.1.4.1.4413.1.1.12.2.2.1.5Integer32 (1..86400)read-writecurrent
agentDhcpServerPoolType
OBJECT-TYPE
This specifies the type of the binding that is associated with this pool.
1.3.6.1.4.1.4413.1.1.12.2.2.1.6INTEGER {un-allocated(0), dynamic(1), manual(2)}read-onlycurrent
agentDhcpServerPoolNetbiosNameServer
OBJECT-TYPE
This specifies the IP address-list of Net BIOS name-servers that are available to DHCP clients (each IP address in this list is separated by comma and the list is terminated by semi-colon), an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list.
1.3.6.1.4.1.4413.1.1.12.2.2.1.7DisplayStringread-writecurrent
agentDhcpServerPoolNetbiosNodeType
OBJECT-TYPE
This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if node-type is not set to any of the four values.
1.3.6.1.4.1.4413.1.1.12.2.2.1.8INTEGER {none(0), b-node(1), p-node(2), m-node(4), h-node(8)}read-writecurrent
agentDhcpServerPoolNextServer
OBJECT-TYPE
This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address
1.3.6.1.4.1.4413.1.1.12.2.2.1.9IpAddressread-writecurrent
agentDhcpServerPoolDomainName
OBJECT-TYPE
This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name.
1.3.6.1.4.1.4413.1.1.12.2.2.1.10DisplayString (SIZE(1..255))read-writecurrent
agentDhcpServerPoolBootfile
OBJECT-TYPE
This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name.
1.3.6.1.4.1.4413.1.1.12.2.2.1.11DisplayString (SIZE(1..128))read-writecurrent
agentDhcpServerPoolRowStatus
OBJECT-TYPE
The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'agentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted.
1.3.6.1.4.1.4413.1.1.12.2.2.1.12RowStatusread-writecurrent
agentDhcpServerPoolAllocationTable
OBJECT-TYPE
A table of the DHCP Server's pool entries, showing the binding(dynamic/manual) specific parameters.
1.3.6.1.4.1.4413.1.1.12.2.3not-accessiblecurrent
agentDhcpServerPoolAllocationEntry
OBJECT-TYPE
Represents entry for a Dhcp server's allocation pool.
1.3.6.1.4.1.4413.1.1.12.2.3.1not-accessiblecurrent
agentDhcpServerPoolAllocationName
OBJECT-TYPE
This specifies name of the DHCP Address pool having dynamic binding. This value is same as agentDhcpServerPoolName of the agentDhcpServerPoolConfigTable.
1.3.6.1.4.1.4413.1.1.12.2.3.1.1DisplayString (SIZE(1..30))read-onlycurrent
agentDhcpServerDynamicPoolIpAddress
OBJECT-TYPE
The IP address of the DHCP Address pool. The IP address must be set before setting the IP Mask or IP Prefix Length. After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
1.3.6.1.4.1.4413.1.1.12.2.3.1.2IpAddressread-writecurrent
agentDhcpServerDynamicPoolIpMask
OBJECT-TYPE
The bit-combination that renders which portion of the address of the DHCP address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
1.3.6.1.4.1.4413.1.1.12.2.3.1.3IpAddressread-writecurrent
agentDhcpServerDynamicPoolIpPrefixLength
OBJECT-TYPE
This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'mnaual'.
1.3.6.1.4.1.4413.1.1.12.2.3.1.4Unsigned32read-writecurrent
agentDhcpServerPoolAllocationType
OBJECT-TYPE
This specifies the type of the binding that is associated with this pool.
1.3.6.1.4.1.4413.1.1.12.2.3.1.5INTEGER {un-allocated(0), dynamic(1), manual(2)}read-onlycurrent
agentDhcpServerManualPoolClientIdentifier
OBJECT-TYPE
It specifies the unique identifier (in colon separated hexadecimal format) of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. To set this object, input should be 7 octets long with the hardware type in the first octet.
1.3.6.1.4.1.4413.1.1.12.2.3.1.6DisplayStringread-writecurrent
agentDhcpServerManualPoolClientName
OBJECT-TYPE
It specifies the name of a DHCP client. Client name should't include domain-name. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
1.3.6.1.4.1.4413.1.1.12.2.3.1.7DisplayString (SIZE(1..30))read-writecurrent
agentDhcpServerManualPoolClientHWAddr
OBJECT-TYPE
It specifies the hardware-address of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. After hardware-address, hardware-type will be configured.
1.3.6.1.4.1.4413.1.1.12.2.3.1.8DisplayStringread-writecurrent
agentDhcpServerManualPoolClientHWType
OBJECT-TYPE
It specifies the hardware-type of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. Before this, hardware-address must be configured.
1.3.6.1.4.1.4413.1.1.12.2.3.1.9INTEGER {ethernet(1), ieee802(6)}read-writecurrent
agentDhcpServerManualPoolIpAddress
OBJECT-TYPE
The IP address of the DHCP Address pool for manual binding. The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
1.3.6.1.4.1.4413.1.1.12.2.3.1.10IpAddressread-writecurrent
agentDhcpServerManualPoolIpMask
OBJECT-TYPE
The bit-combination that renders which portion of the address of the DHCP address pool for a manual binding refers to the network or subnet and which part refers to the host. The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
1.3.6.1.4.1.4413.1.1.12.2.3.1.11IpAddressread-writecurrent
agentDhcpServerManualPoolIpPrefixLength
OBJECT-TYPE
This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'dynamic'.
1.3.6.1.4.1.4413.1.1.12.2.3.1.12Unsigned32read-writecurrent
agentDhcpServerExcludedAddressRangeCreate
OBJECT-TYPE
It sets the IP address-ranges(from low to high) that a DHCP server should not assign to DHCP clients. Each time this MIB object is set successfully, one excluded range of IP address will be set. It is given in format - start and end IP address separated by '-' and terminated by ';'. One example would be - 192.168.36.1-200.1.1.1; . This sets one excluded range of IP address,which starts at 192.168.36.1 and ends at 200.1.1.1. If only start IP address is given, end IP address is assumed to be equal to the start IP address. Get operation on this MIB object returns a null-value, as for the purpose of viewing the exclude-address ranges, the user should perform the traversal of agentDhcpServerExcludedAddressRangeTable. For this reason the get operation on object agentDhcpServerExcludedAddressRangeCreate becomes insignificant.
1.3.6.1.4.1.4413.1.1.12.2.4DisplayStringread-writecurrent
agentDhcpServerExcludedAddressRangeTable
OBJECT-TYPE
A table of the DHCP Server Pool configuration entries.
1.3.6.1.4.1.4413.1.1.12.2.5not-accessiblecurrent
agentDhcpServerExcludedAddressRangeEntry
OBJECT-TYPE
Represents entry for a Dhcp server excluded address range table.
1.3.6.1.4.1.4413.1.1.12.2.5.1not-accessiblecurrent
agentDhcpServerExcludedRangeIndex
OBJECT-TYPE
This specifies the index of the excluded IP address-range table.
1.3.6.1.4.1.4413.1.1.12.2.5.1.1Unsigned32 (1..256)read-onlycurrent
agentDhcpServerExcludedStartIpAddress
OBJECT-TYPE
This specifies the starting IP address of the excluded address-range.
1.3.6.1.4.1.4413.1.1.12.2.5.1.2IpAddressread-onlycurrent
agentDhcpServerExcludedEndIpAddress
OBJECT-TYPE
This specifies the ending IP address of the excluded address-range.
1.3.6.1.4.1.4413.1.1.12.2.5.1.3IpAddressread-onlycurrent
agentDhcpServerExcludedAddressRangeStatus
OBJECT-TYPE
This specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted.
1.3.6.1.4.1.4413.1.1.12.2.5.1.4RowStatusread-writecurrent
agentDhcpServerPoolOptionCreate
OBJECT-TYPE
This sets the option for an existing DHCP Server pool. Here, it is required to enter the pool-index, for which option is to be set and the value of the DHCP option code in string-format : pool-index and option code separated by '-' and terminated by ';', one example would be -> 1-19; , 1 is the pool-index and 19 is the option code.
1.3.6.1.4.1.4413.1.1.12.2.6DisplayStringread-writecurrent
agentDhcpServerPoolOptionTable
OBJECT-TYPE
A table for configuring DHCP Server options.
1.3.6.1.4.1.4413.1.1.12.2.7not-accessiblecurrent
agentDhcpServerPoolOptionEntry
OBJECT-TYPE
Represents entry for a Dhcp server option table.
1.3.6.1.4.1.4413.1.1.12.2.7.1not-accessiblecurrent
agentDhcpServerPoolOptionIndex
OBJECT-TYPE
The Pool Index alongwith option-code, acts as index for the DHCP Server Option table.
1.3.6.1.4.1.4413.1.1.12.2.7.1.1Unsigned32 (1..512)read-onlycurrent
agentDhcpServerPoolOptionCode
OBJECT-TYPE
This specifies the DHCP option code. This alongwith pool-index acts as the index of the DHCP Server Option table.
1.3.6.1.4.1.4413.1.1.12.2.7.1.2Unsigned32 (1..254)read-writecurrent
agentDhcpServerOptionPoolName
OBJECT-TYPE
The name of the DHCP Address pool. This value cannot be modified
1.3.6.1.4.1.4413.1.1.12.2.7.1.3DisplayString (SIZE(1..31))read-onlycurrent
agentDhcpServerPoolOptionAsciiData
OBJECT-TYPE
This specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. If an ascii optiondata is entered again, it gets concatenated with the previous ascii data.
1.3.6.1.4.1.4413.1.1.12.2.7.1.4DisplayString (SIZE(1..441))read-writecurrent
agentDhcpServerPoolOptionHexData
OBJECT-TYPE
This specifies semi-colon separated hexadecimal data. Two hexadecimal digits in hexadecimal character string represents one byte . Hexadecimal strings can be entered in the following formats : 1) continuous hexadecimal digits like -- 0123456789abcdef 2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f 3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e 4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865 If a Hex optiondata is entered again, it gets concatenated with the previous Hex data.
1.3.6.1.4.1.4413.1.1.12.2.7.1.5DisplayString (SIZE(1..1324))read-writecurrent
agentDhcpServerPoolOptionIpAddressData
OBJECT-TYPE
This specifies the IP-address list(each IP-address is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between). If a IP option is entered again, it gets concatenated with the previous IP data. Maximum no. of IP addresses that can be entered at one time is 8.
1.3.6.1.4.1.4413.1.1.12.2.7.1.6DisplayStringread-writecurrent
agentDhcpServerPoolOptionStatus
OBJECT-TYPE
This specifies the row-status of the DHCP Server Pool option.
1.3.6.1.4.1.4413.1.1.12.2.7.1.7RowStatusread-writecurrent
agentDhcpServerLeaseGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.12.3
agentDhcpServerLeaseClearAllBindings
OBJECT-TYPE
Clears All the DHCP server bindings.
1.3.6.1.4.1.4413.1.1.12.3.1INTEGER {enable(1), disable(2)}read-writecurrent
agentDhcpServerLeaseTable
OBJECT-TYPE
A table of the DHCP Server's Lease entries.
1.3.6.1.4.1.4413.1.1.12.3.2not-accessiblecurrent
agentDhcpServerLeaseEntry
OBJECT-TYPE
Represents entry for a Dhcp server's leases.
1.3.6.1.4.1.4413.1.1.12.3.2.1not-accessiblecurrent
agentDhcpServerLeaseIPAddress
OBJECT-TYPE
This specifies the IP address leased to the client.
1.3.6.1.4.1.4413.1.1.12.3.2.1.1IpAddressread-onlycurrent
agentDhcpServerLeaseIPMask
OBJECT-TYPE
This specifies the IP mask of the address leased to the client.
1.3.6.1.4.1.4413.1.1.12.3.2.1.2IpAddressread-onlycurrent
agentDhcpServerLeaseHWAddress
OBJECT-TYPE
This specifies the hardware address of the client.
1.3.6.1.4.1.4413.1.1.12.3.2.1.3MacAddressread-onlycurrent
agentDhcpServerLeaseRemainingTime
OBJECT-TYPE
This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds.
1.3.6.1.4.1.4413.1.1.12.3.2.1.4TimeTicksread-onlycurrent
agentDhcpServerLeaseType
OBJECT-TYPE
This specifies the type of address lease as Automatic or Manual.
1.3.6.1.4.1.4413.1.1.12.3.2.1.5INTEGER {automatic(1), manual(2)}read-onlycurrent
agentDhcpServerLeaseStatus
OBJECT-TYPE
This specifies the row-status of the address-lease. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-lease is cleared.
1.3.6.1.4.1.4413.1.1.12.3.2.1.6RowStatusread-writecurrent
agentDhcpServerAddressConflictGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.12.4
agentDhcpServerClearAllAddressConflicts
OBJECT-TYPE
Clears all the address-conflicts found by DHCP server,when set to enable.
1.3.6.1.4.1.4413.1.1.12.4.1INTEGER {enable(1), disable(2)}read-writecurrent
agentDhcpServerAddressConflictLogging
OBJECT-TYPE
It is used to enable, or disables the logging of address-conflicts on a DHCP Server.
1.3.6.1.4.1.4413.1.1.12.4.2INTEGER {enable(1), disable(2)}read-writecurrent
agentDhcpServerAddressConflictTable
OBJECT-TYPE
A table of the conflicting-address entries.
1.3.6.1.4.1.4413.1.1.12.4.3not-accessiblecurrent
agentDhcpServerAddressConflictEntry
OBJECT-TYPE
Represents a conflicting-address entry.
1.3.6.1.4.1.4413.1.1.12.4.3.1not-accessiblecurrent
agentDhcpServerAddressConflictIP
OBJECT-TYPE
This specifies the conflicting IP address assigned to the client by DHCP server.
1.3.6.1.4.1.4413.1.1.12.4.3.1.1IpAddressread-onlycurrent
agentDhcpServerAddressConflictDetectionType
OBJECT-TYPE
This specifies the address-conflict detection-method.
1.3.6.1.4.1.4413.1.1.12.4.3.1.2INTEGER {ping(1), gratuitousArp(2)}read-onlycurrent
agentDhcpServerAddressConflictDetectionTime
OBJECT-TYPE
This specifies the sysUpTime at which the address-conflict was detected.
1.3.6.1.4.1.4413.1.1.12.4.3.1.3TimeTicksread-onlycurrent
agentDhcpServerAddressConflictStatus
OBJECT-TYPE
This specifies the row-status of the conflicting-address entry. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding conflicting-address entry is cleared.
1.3.6.1.4.1.4413.1.1.12.4.3.1.4RowStatusread-writecurrent