MIBs Depot

F10-S-SERIES-CHASSIS-MIB

Registered at
1.3.6.1.4.1.6027.3.10
Last updated
2007-10-03 12:00
Organization
Force10 Networks, Inc.
Revisions
2007-10-03 12:00
Namespace
dell
Source file
F10-S-SERIES-CHASSIS-MIB
Digest
sha256:0813b6bba3ca09c97f75061303c905bfe99e30b2ad33adc78daf10459c56ea21

Description

Force10 S-Series Enterprise Chassis MIB.

Contact

Force10 Networks, Inc. 350 Holger Way San Jose, CA 95134 USA Phone: +1 (408) 571 3500 Fax: +1 (408) 571 3550 Email: support@force10networks.com

Imports

FromSymbols
F10-CHASSIS-MIBchAlarmVarInteger, chAlarmVarPort, chAlarmVarSlot, chAlarmVarString
FORCE10-SMIf10Mgmt
FORCE10-TCF10ChassisType, F10HundredthdB, F10MfgDate, F10ProcessorModuleType, F10SSeriesPortType, F10SwDate
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

F10-CHASSIS-MIB
F10-S-SERIES-CHASSIS-MIB
FORCE10-SMI
FORCE10-TC
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CodeType
TEXTUAL-CONVENTION
The code type value for a given unit, displayed in hexadecimal.
current
UnitType
TEXTUAL-CONVENTION
The unit type value for a given unit, displayed in hexadecimal.
current

Objects

NameOIDSyntaxAccessStatus
f10SSerChassisObject
OBJECT-IDENTITY
1.3.6.1.4.1.6027.3.10.1
chObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6027.3.10.1.1
chNumStackUnits
OBJECT-TYPE
The total number of stack units configured on the chassis.
1.3.6.1.4.1.6027.3.10.1.1.1Integer32read-onlycurrent
chNumMaxStackableUnits
OBJECT-TYPE
Indicates the maximum allowed Unit Number configurable on the chassis.
1.3.6.1.4.1.6027.3.10.1.1.2Integer32read-onlycurrent
chStackUnitIndexNext
OBJECT-TYPE
This object contains the next appropriate value to be used for chStackUnitIndex when creating entries in the chStackUnitTable. The value 0 indicates that no unassigned entries are available. To obtain the chStackUnitIndexNext value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned number after each retrieval operation. After a manager retrieves a value the agent will determine when this index value will be made available for reuse. Note that this object is not the unit number assigned by the management unit.
1.3.6.1.4.1.6027.3.10.1.1.3Integer32 (0 | 1..8)read-onlycurrent
chSysObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6027.3.10.1.2
chSwitchTypeTable
OBJECT-TYPE
A list of supported switch types.
1.3.6.1.4.1.6027.3.10.1.2.1not-accessibledeprecated
chSwitchTypeEntry
OBJECT-TYPE
A list of supported switch types entries.
1.3.6.1.4.1.6027.3.10.1.2.1.1not-accessibledeprecated
chSwitchTypeSID
OBJECT-TYPE
The unique switch type index (SID).
1.3.6.1.4.1.6027.3.10.1.2.1.1.1Integer32read-onlydeprecated
chSwitchTypeModelID
OBJECT-TYPE
The pre-configured model ID for this swich type.
1.3.6.1.4.1.6027.3.10.1.2.1.1.2DisplayStringread-onlydeprecated
chSwitchTypeCodeType
OBJECT-TYPE
The code type of this switch type.
1.3.6.1.4.1.6027.3.10.1.2.1.1.3CodeTyperead-onlydeprecated
chSwitchTypeMgmtPreference
OBJECT-TYPE
indicates the default prefernce value for the management unit. A value of 0 indicates a disabled or unassigned preference.
1.3.6.1.4.1.6027.3.10.1.2.1.1.4Integer32 (0 | 1..15)read-onlydeprecated
chStackUnitTable
OBJECT-TYPE
A list of stack units configured in the chassis. The StackUnit table contains the management information of each stacked unit in the chassis.
1.3.6.1.4.1.6027.3.10.1.2.2not-accessiblecurrent
chStackUnitEntry
OBJECT-TYPE
A list of units entries containing information for each stacked unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1not-accessiblecurrent
chStackUnitIndex
OBJECT-TYPE
The unique index for this entry. Refer to the object chStackUnitIndexNext.
1.3.6.1.4.1.6027.3.10.1.2.2.1.1Integer32not-accessiblecurrent
chStackUnitNumber
OBJECT-TYPE
The unit number associated with this unit. The unit number can be manually assigned to stack members. Note that the unit number assignement is based on the following factors: - if the unit number is requested here, but another unit already uses that number, the unit changes its configured unit number to the lowest unassigned unit number. - if the unit number is 0, i.e. unassigned, then the unit sets its configured unit number to the lowest unassigned unit number. - if the unit number is configured and no other device uses the unit number, then the unit starts using the configured unit number. - if a unit detects that the maximum number of units already exist, the unit sets its unit number to 0, i.e. unassigned, and stays in the Initialization state.
1.3.6.1.4.1.6027.3.10.1.2.2.1.2Integer32 (0 | 1..8)read-createcurrent
chStackUnitSID
OBJECT-TYPE
The index of the chSwitchTypeTable which this unit is associated with.
1.3.6.1.4.1.6027.3.10.1.2.2.1.3Integer32read-createdeprecated
chStackUnitMgmtStatus
OBJECT-TYPE
Indicates whether the unit is a Management Unit, a Stack Unit, or unassigned. Setting this object to mgmtUnit(1) initiates transfer of the management functionality to the specified stack unit. Object values stackUnit(2) and unassigned(3) cannot be set.
1.3.6.1.4.1.6027.3.10.1.2.2.1.4INTEGER {mgmtUnit(1), standbyUnit(2), stackUnit(3), unassigned(4)}read-createcurrent
chStackUnitHwMgmtPreference
OBJECT-TYPE
indicates whether the unit is capable of becoming a management unit. if it is unsigned, this unit can be a management unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.5INTEGER {disabled(0), unsassigned(1), assigned(2)}read-onlycurrent
chStackUnitAdmMgmtPreference
OBJECT-TYPE
indicates how likely this unit is to be chosen as the management unit. A value of 0 indicates a disabled or unassigned preference.
1.3.6.1.4.1.6027.3.10.1.2.2.1.6Integer32 (0 | 1..15)read-createcurrent
chStackUnitModelID
OBJECT-TYPE
The plugged-in model ID for this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.7DisplayStringread-onlycurrent
chStackUnitStatus
OBJECT-TYPE
The status of this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.8INTEGER {ok(1), unsupported(2), codeMismatch(3), configMismatch(4), unitDown(5), notPresent(6)}read-onlycurrent
chStackUnitDescription
OBJECT-TYPE
The description of this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.9DisplayStringread-createcurrent
chStackUnitCodeVersion
OBJECT-TYPE
Current code version of this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.10DisplayStringread-onlycurrent
chStackUnitCodeVersionInFlash
OBJECT-TYPE
Code version of this unit's flash.
1.3.6.1.4.1.6027.3.10.1.2.2.1.11DisplayStringread-onlycurrent
chStackUnitSerialNumber
OBJECT-TYPE
The unit's serial number.
1.3.6.1.4.1.6027.3.10.1.2.2.1.12DisplayStringread-onlycurrent
chStackUnitUpTime
OBJECT-TYPE
The system up time of the unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.13TimeTicksread-onlycurrent
chStackUnitTemp
OBJECT-TYPE
The temperature of the unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.14Gauge32read-onlycurrent
chStackUnitType
OBJECT-TYPE
The Unit Type identifier for this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.15UnitTyperead-onlycurrent
chStackUnitSysType
OBJECT-TYPE
The Force10 system type for this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.16F10ChassisTyperead-onlycurrent
chStackUnitVendorId
OBJECT-TYPE
The vendor id that manufactured this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.17DisplayStringread-onlycurrent
chStackUnitMfgDate
OBJECT-TYPE
The date the unit is manufactured.
1.3.6.1.4.1.6027.3.10.1.2.2.1.18F10MfgDateread-onlycurrent
chStackUnitMacAddress
OBJECT-TYPE
A 6-octet MAC Address assigned to this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.19MacAddressread-onlycurrent
chStackUnitPartNum
OBJECT-TYPE
The unit part number
1.3.6.1.4.1.6027.3.10.1.2.2.1.20DisplayStringread-onlycurrent
chStackUnitProductRev
OBJECT-TYPE
The unit manufacturer's product revision
1.3.6.1.4.1.6027.3.10.1.2.2.1.21DisplayStringread-onlycurrent
chStackUnitProductOrder
OBJECT-TYPE
The product order number for this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.22DisplayStringread-onlycurrent
chStackUnitCountryCode
OBJECT-TYPE
The unit manufacturer's country code
1.3.6.1.4.1.6027.3.10.1.2.2.1.23OCTET STRING (SIZE(2))read-onlycurrent
chStackUnitNum10GigEtherPorts
OBJECT-TYPE
The number of 10G Ethernet/802.3 interfaces in this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.24Integer32read-onlycurrent
chStackUnitNumGigEtherPorts
OBJECT-TYPE
The number of 1G Ethernet/802.3 interfaces in this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.25Integer32read-onlycurrent
chStackUnitNumFastEtherPorts
OBJECT-TYPE
The number of 10/100 Ethernet/802.3 interfaces in this unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.26Integer32read-onlycurrent
chStackUnitNumFanTrays
OBJECT-TYPE
The number of fan trays on the unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.27Integer32read-onlycurrent
chStackUnitNumPowerSupplies
OBJECT-TYPE
The number of power supply in the unit.
1.3.6.1.4.1.6027.3.10.1.2.2.1.28Integer32read-onlycurrent
chStackUnitNumPluggableModules
OBJECT-TYPE
The number of pluggable modules in the stack.
1.3.6.1.4.1.6027.3.10.1.2.2.1.29Integer32read-onlycurrent
chStackUnitRowStatus
OBJECT-TYPE
Creation of new instances requires the object chStackUnitIndexNext to be retreived to create an entry. active(1) - This instance is active. createAndGo(4) - Creates a new instance. destroy(6) - Removes this instance.
1.3.6.1.4.1.6027.3.10.1.2.2.1.30RowStatusread-createcurrent
chSysPowerSupplyTable
OBJECT-TYPE
A list of power supply resident in the S-series chassis.
1.3.6.1.4.1.6027.3.10.1.2.3not-accessiblecurrent
chSysPowerSupplyEntry
OBJECT-TYPE
A power supply entry containing objects for a particular power supply.
1.3.6.1.4.1.6027.3.10.1.2.3.1not-accessiblecurrent
chSysPowerSupplyIndex
OBJECT-TYPE
The unique index of the power supply.
1.3.6.1.4.1.6027.3.10.1.2.3.1.1Integer32read-onlycurrent
chSysPowerSupplyOperStatus
OBJECT-TYPE
The status of the power supply.
1.3.6.1.4.1.6027.3.10.1.2.3.1.2INTEGER {up(1), down(2)}read-onlycurrent
chSysPowerSupplyType
OBJECT-TYPE
The type of the power supply.
1.3.6.1.4.1.6027.3.10.1.2.3.1.3INTEGER {ac(1), dc(2)}read-onlycurrent
chSysFanTrayTable
OBJECT-TYPE
A list of fan tray resident in the S-series chassis.
1.3.6.1.4.1.6027.3.10.1.2.4not-accessiblecurrent
chSysFanTrayEntry
OBJECT-TYPE
A fan entry containing objects for a particular fan tray.
1.3.6.1.4.1.6027.3.10.1.2.4.1not-accessiblecurrent
chSysFanTrayIndex
OBJECT-TYPE
The unique index of the fan tray.
1.3.6.1.4.1.6027.3.10.1.2.4.1.1Integer32read-onlycurrent
chSysFanTrayOperStatus
OBJECT-TYPE
The status of the fan tray.
1.3.6.1.4.1.6027.3.10.1.2.4.1.2INTEGER {up(1), down(2)}read-onlycurrent
chSysPortTable
OBJECT-TYPE
A list of ports in the S-series chassis.
1.3.6.1.4.1.6027.3.10.1.2.5not-accessiblecurrent
chSysPortEntry
OBJECT-TYPE
A port entry containing objects for a particular port.
1.3.6.1.4.1.6027.3.10.1.2.5.1not-accessiblecurrent
chSysPortIndex
OBJECT-TYPE
A unique index for each slot within the unit.
1.3.6.1.4.1.6027.3.10.1.2.5.1.1Integer32read-onlycurrent
chSysPortType
OBJECT-TYPE
The type of port in the unit.
1.3.6.1.4.1.6027.3.10.1.2.5.1.2F10SSeriesPortTyperead-onlycurrent
chSysPortAdminStatus
OBJECT-TYPE
The admin status of the card. The port admin status is Up if the user has configured it to be up otherwise, the admin status is Down.
1.3.6.1.4.1.6027.3.10.1.2.5.1.3INTEGER {up(1), down(2)}read-onlycurrent
chSysPortOperStatus
OBJECT-TYPE
The operational status provides further condition of the card. If the chSysPortAdminStatus is 'up', the valid state is 'ready' - the card is present and ready and the chSysPortAdminStatus status is 'up'. 'portDown' - the port is down or not enabled. 'portProblem' - port hardware problems. 'cardProblem' - not used. Same as cardDown. 'cardDown' - the card is downed. 'notPresent' - the card is not present.
1.3.6.1.4.1.6027.3.10.1.2.5.1.4INTEGER {ready(1), portDown(2), portProblem(3), cardProblem(4), cardDown(5), notPresent(6)}read-onlycurrent
chSysPortIfIndex
OBJECT-TYPE
The index of ifIndex in the Interface Mib. This index can link to the ifEntry to get this interface/port information
1.3.6.1.4.1.6027.3.10.1.2.5.1.5Integer32read-onlycurrent
chSysPortXfpRecvPower
OBJECT-TYPE
The power signal strength (dB) received for 10G Ethernet/802.3 interface. This object is applied to 10Gig port only.
1.3.6.1.4.1.6027.3.10.1.2.5.1.6F10HundredthdBread-onlycurrent
chSysStackPortTable
OBJECT-TYPE
A list of stack ports in the S-series chassis.
1.3.6.1.4.1.6027.3.10.1.2.6not-accessiblecurrent
chSysStackPortEntry
OBJECT-TYPE
A stack port entry containing objects for a particular stack port.
1.3.6.1.4.1.6027.3.10.1.2.6.1not-accessiblecurrent
chSysStackPortIndex
OBJECT-TYPE
The index for each stack port within the unit. 1 - stack port A, 2 - stack port B
1.3.6.1.4.1.6027.3.10.1.2.6.1.1Integer32read-onlycurrent
chSysStackPortConfiguredMode
OBJECT-TYPE
Configured mode of the Stack Port. Changes to this value happen only after a reset of the unit.
1.3.6.1.4.1.6027.3.10.1.2.6.1.2INTEGER {stack(1), ethernet(2), unknown(3)}read-onlycurrent
chSysStackPortRunningMode
OBJECT-TYPE
Operational mode of the Stack Port.
1.3.6.1.4.1.6027.3.10.1.2.6.1.3INTEGER {stack(1), ethernet(2), unknown(3)}read-onlycurrent
chSysStackPortLinkStatus
OBJECT-TYPE
Link status of the Stack Port. Ports in ethernet mode will return a status of down(2).
1.3.6.1.4.1.6027.3.10.1.2.6.1.4INTEGER {up(1), down(2)}read-onlycurrent
chSysStackPortLinkSpeed
OBJECT-TYPE
Speed of the Stack Port measured in Gb/s. Ports in ethernet mode will return a speed of 0.
1.3.6.1.4.1.6027.3.10.1.2.6.1.5Gauge32read-onlycurrent
chSysStackPortRxDataRate
OBJECT-TYPE
Received Data rate on the stacking port. Measured in Mb/s. Ports in ethernet mode will return 0.
1.3.6.1.4.1.6027.3.10.1.2.6.1.6Counter32read-onlycurrent
chSysStackPortRxErrorRate
OBJECT-TYPE
Received error rate on the stack port. Measured in Errors per Second. Ports in ethernet mode will return 0.
1.3.6.1.4.1.6027.3.10.1.2.6.1.7Counter32read-onlycurrent
chSysStackPortRxTotalErrors
OBJECT-TYPE
Received number of errors since boot. The counter may wrap. Ports in ethernet mode will return 0.
1.3.6.1.4.1.6027.3.10.1.2.6.1.8Counter32read-onlycurrent
chSysStackPortTxDataRate
OBJECT-TYPE
Transmitted Data rate on the stacking port. Measured in Mb/s. Ports in ethernet mode will return 0.
1.3.6.1.4.1.6027.3.10.1.2.6.1.9Counter32read-onlycurrent
chSysStackPortTxErrorRate
OBJECT-TYPE
Transmitted error rate on the stack port. Measured in Errors per Second. Ports in ethernet mode will return 0.
1.3.6.1.4.1.6027.3.10.1.2.6.1.10Counter32read-onlycurrent
chSysStackPortTxTotalErrors
OBJECT-TYPE
Transmitted number of errors since boot. The counter may wrap. Ports in ethernet mode will return 0.
1.3.6.1.4.1.6027.3.10.1.2.6.1.11Counter32read-onlycurrent
chSysProcessorTable
OBJECT-TYPE
A list of Processors resident in the S-series chassis.
1.3.6.1.4.1.6027.3.10.1.2.7not-accessiblecurrent
chSysProcessorEntry
OBJECT-TYPE
A list of Processor entries.
1.3.6.1.4.1.6027.3.10.1.2.7.1not-accessiblecurrent
chSysProcessorModule
OBJECT-TYPE
The type of module running on the Processor.
1.3.6.1.4.1.6027.3.10.1.2.7.1.1F10ProcessorModuleTyperead-onlycurrent
chSysProcessorUpTime
OBJECT-TYPE
The SysUpTime for this Processor.
1.3.6.1.4.1.6027.3.10.1.2.7.1.2TimeTicksread-onlycurrent
chSysProcessorNvramSize
OBJECT-TYPE
Total Non-volatile RAM in Kbytes.
1.3.6.1.4.1.6027.3.10.1.2.7.1.3Integer32read-onlycurrent
chSysProcessorMemSize
OBJECT-TYPE
The size of the RAM in Mb.
1.3.6.1.4.1.6027.3.10.1.2.7.1.4Integer32read-onlycurrent
chSysSwModuleTable
OBJECT-TYPE
A list of software version information in a processor.
1.3.6.1.4.1.6027.3.10.1.2.8not-accessiblecurrent
chSysSwModuleEntry
OBJECT-TYPE
A software module entry containing version number information for a particular processor.
1.3.6.1.4.1.6027.3.10.1.2.8.1not-accessiblecurrent
chSysSwRuntimeImgVersion
OBJECT-TYPE
This variable indicates the software module version that is currently running on the processor. The software release version is in the format as follow: <major version>.<minor version>.<minor version>...... '1.1' indicate major version of 1 and minor release of 1.
1.3.6.1.4.1.6027.3.10.1.2.8.1.1DisplayStringread-onlycurrent
chSysSwRuntimeImgDate
OBJECT-TYPE
The release date of this software module.
1.3.6.1.4.1.6027.3.10.1.2.8.1.2F10SwDateread-onlycurrent
chSysSwCurrentBootImgVersion
OBJECT-TYPE
The software release version is in the format as follow: <major version>.<minor version>.<minor version>...... '1.1' indicate major version of 1 and minor release of 1.
1.3.6.1.4.1.6027.3.10.1.2.8.1.3DisplayStringread-onlycurrent
chSysSwCurrentBootImgDate
OBJECT-TYPE
The release date of this software module If the CPU is reset, the software module running date (chSysSwModuleRunningDate) will change to this current date.
1.3.6.1.4.1.6027.3.10.1.2.8.1.4DateAndTimeread-onlycurrent
chSysSwCurrentBootImgStatus
OBJECT-TYPE
Fill this in later
1.3.6.1.4.1.6027.3.10.1.2.8.1.5INTEGER {ok(1), failed(2)}read-onlycurrent
chSysSwBackupBootImgVersion
OBJECT-TYPE
The software release version is in the format as follow: <major version>.<minor version>.<minor version>...... '1.1' indicate major version of 1 and minor release of 1.
1.3.6.1.4.1.6027.3.10.1.2.8.1.6DisplayStringread-onlycurrent
chSysSwBackupBootImgDate
OBJECT-TYPE
The backup boot image released date.
1.3.6.1.4.1.6027.3.10.1.2.8.1.7DateAndTimeread-onlycurrent
chSysSwBackupBootImgStatus
OBJECT-TYPE
The status of the backup boot image.
1.3.6.1.4.1.6027.3.10.1.2.8.1.8INTEGER {ok(1), failed(2)}read-onlycurrent
chSysSwNextRebootImage
OBJECT-TYPE
The boot flash image selection. When the chassis is rebooted, this is the boot image to use.
1.3.6.1.4.1.6027.3.10.1.2.8.1.9INTEGER {bootImage-A(1), bootImage-B(2)}read-onlycurrent
chSysSwCurrentBootImage
OBJECT-TYPE
The current boot image. This is the boot image described by the chSysSwCurrentBootImgVersion, chSysSwCurrentBootImgDate, and chSysSwCurrentBootImgStatus objects.
1.3.6.1.4.1.6027.3.10.1.2.8.1.10INTEGER {bootImage-A(1), bootImage-B(2)}read-onlycurrent
chStackUnitUtilTable
OBJECT-TYPE
A table listing the cpu and memory utilization in the stack unit.
1.3.6.1.4.1.6027.3.10.1.2.9not-accessiblecurrent
chStackUnitUtilEntry
OBJECT-TYPE
A row in each processor cpu and mmory utilization
1.3.6.1.4.1.6027.3.10.1.2.9.1not-accessiblecurrent
chStackUnitCpuType
OBJECT-TYPE
The type of module running on the Processor.
1.3.6.1.4.1.6027.3.10.1.2.9.1.1F10ProcessorModuleTyperead-onlycurrent
chStackUnitCpuUtil5Sec
OBJECT-TYPE
CPU utilization in percentage for last 5 seconds.
1.3.6.1.4.1.6027.3.10.1.2.9.1.2Gauge32 (0..100)read-onlycurrent
chStackUnitCpuUtil1Min
OBJECT-TYPE
CPU utilization in percentage for last 1 minute.
1.3.6.1.4.1.6027.3.10.1.2.9.1.3Gauge32 (0..100)read-onlycurrent
chStackUnitCpuUtil5Min
OBJECT-TYPE
CPU utilization in percentage for last 5 minutes.
1.3.6.1.4.1.6027.3.10.1.2.9.1.4Gauge32 (0..100)read-onlycurrent
chStackUnitMemUsageUtil
OBJECT-TYPE
Total memory usage in percentage.
1.3.6.1.4.1.6027.3.10.1.2.9.1.5Gauge32 (0..100)read-onlycurrent
chAlarmObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6027.3.10.1.4
chAlarmMibNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6027.3.10.1.4.0
f10sSeriesMibConformance
OBJECT-IDENTITY
1.3.6.1.4.1.6027.3.10.2
f10sSeriesMibCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6027.3.10.2.1
f10sSeriesMibGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6027.3.10.2.2

Notifications

NameOIDStatus
chAlarmStackUnitDown
NOTIFICATION-TYPE
The driver/agent generate this trap when a stack unit operational status is down.
1.3.6.1.4.1.6027.3.10.1.4.0.1current
chAlarmStackUnitUp
NOTIFICATION-TYPE
The driver/agent generate this trap when a stack unit operational status is up.
1.3.6.1.4.1.6027.3.10.1.4.0.2current
chAlarmStackUnitReset
NOTIFICATION-TYPE
The driver/agent generate this trap when a stack unit is reset.
1.3.6.1.4.1.6027.3.10.1.4.0.3current
chAlarmStackUnitOffline
NOTIFICATION-TYPE
The driver/agent generate this trap when a stack unit is set to offline.
1.3.6.1.4.1.6027.3.10.1.4.0.4current
chAlarmStackUnitCodeMismatch
NOTIFICATION-TYPE
The driver/agent generate this trap when a stack unit is not the same code as a management stack.
1.3.6.1.4.1.6027.3.10.1.4.0.5current
chAlarmStackPortLinkUp
NOTIFICATION-TYPE
The driver/agent generate this trap when a stack port is connected to annother stack member.
1.3.6.1.4.1.6027.3.10.1.4.0.6current
chAlarmStackPortLinkDown
NOTIFICATION-TYPE
The driver/agent generate this trap when a stack port is disconnected from annother stack member.
1.3.6.1.4.1.6027.3.10.1.4.0.7current

Conformance

NameOIDStatus
f10sSeriesMibCompliance
MODULE-COMPLIANCE
The compliance statement for Force10 product which implement the f10 S-Series Chassis MIB.
1.3.6.1.4.1.6027.3.10.2.1.1current
f10sSeriesComponentGroup
OBJECT-GROUP
A collection of objects providing the overall S-series chassis information.
1.3.6.1.4.1.6027.3.10.2.2.1current
f10sSeriesSystemGroup
OBJECT-GROUP
A collection of objects providing the chassis system hardware information.
1.3.6.1.4.1.6027.3.10.2.2.2current
f10sSeriesNotificationGroup
NOTIFICATION-GROUP
Notifications for Force10 S-Series Chassis mib
1.3.6.1.4.1.6027.3.10.2.2.3current