EdgeSwitch-ROUTING6-MIB
- Registered at
- 1.3.6.1.4.1.4413.1.1.30
- Last updated
- 2011-01-26 00:00
- Organization
- Broadcom Inc
- Revisions
- 2011-01-26 00:00, 2007-05-23 00:00, 2005-09-21 17:00
- Namespace
- edgeswitch
- Source file
EdgeSwitch-ROUTING6-MIB- Digest
sha256:4987efa66db6e7d4834f2a4721d83bf7d3d2912dde0cfde47ba6a01956219300
Description
The Ubiquiti Private MIB for FastPath Ipv6 Routing
Imports
| From | Symbols |
|---|---|
| EdgeSwitch-REF-MIB | fastPath |
| IPV6-TC | Ipv6Address, Ipv6AddressIfIdentifier, Ipv6AddressPrefix, Ipv6IfIndex, Ipv6IfIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowPointer, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue, VariablePointer |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EdgeSwitch-REF-MIB EdgeSwitch-ROUTING6-MIB IPV6-TC SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| agentIpv6Group OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.30.1 | |||
| agentIpv6RoutingMode OBJECT-TYPE Administratively enables/disables ipv6 unicast routing on the switch. | 1.3.6.1.4.1.4413.1.1.30.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6InterfaceTable OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.30.1.2 | not-accessible | current | |
| agentIpv6InterfaceEntry OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.30.1.2.1 | not-accessible | current | |
| agentIpv6InterfaceIfIndex OBJECT-TYPE The IfIndex associated with this instance. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.1 | Integer32 (0..2147483647) | read-only | current |
| agentIpv6InterfaceMtuValue OBJECT-TYPE Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to this object effectively un-configures the MTU. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.2 | Unsigned32 (0 | 1280..1500) | read-write | current |
| agentIpv6InterfaceDadTransmits OBJECT-TYPE Configures the dad transmits value for this interface. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.3 | Integer32 (0..100) | read-write | current |
| agentIpv6InterfaceLinkLocalOnly OBJECT-TYPE When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.4 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6InterfaceIcmpUnreachables OBJECT-TYPE If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.5 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6InterfaceAutoconfig OBJECT-TYPE If this object is enabled, it indicates that the IPv6 address is automatically generated using IPv6 stateless address auto configuration. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.6 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6InterfaceDhcpClient OBJECT-TYPE If this object is enabled, the interface uses DHCPv6 Client protocol to acquire an IPv6 address. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.7 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6InterfaceIcmpRedirects OBJECT-TYPE Enable/Disable the sending of ICMPv6 redirect messages in the redirect scenario where the forwarded packet is sent out through the same interface on which the packet was received. | 1.3.6.1.4.1.4413.1.1.30.1.2.1.8 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6RouterAdvertisementTable OBJECT-TYPE There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well. | 1.3.6.1.4.1.4413.1.1.30.1.3 | not-accessible | current | |
| agentIpv6RouterAdvertisementEntry OBJECT-TYPE | 1.3.6.1.4.1.4413.1.1.30.1.3.1 | not-accessible | current | |
| agentIpv6RouterAdvertisementIfIndex OBJECT-TYPE Interface Number to configure Router Advertisement on. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.1 | Integer32 (0..2147483647) | read-only | current |
| agentIpv6RouterAdvertisementSuppressMode OBJECT-TYPE Enable or disable router advertisement suppression on the interface. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6RouterAdvertisementMaxAdvertisementInterval OBJECT-TYPE Maximum time allowed between sending router advertisements from the interface. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.3 | Integer32 (4..1800) | read-write | current |
| agentIpv6RouterAdvertisementAdvertisementLifetime OBJECT-TYPE Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.4 | Integer32 (4..65520) | read-write | current |
| agentIpv6RouterAdvertisementNbrSolicitInterval OBJECT-TYPE Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.5 | Integer32 (0..3600000) | read-write | current |
| agentIpv6RouterAdvertisementReachableTime OBJECT-TYPE Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.6 | Integer32 (0..3600000) | read-write | current |
| agentIpv6RouterAdvertisementManagedFlag OBJECT-TYPE Value of managed config field of router advertisement sent from the interface. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.7 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6RouterAdvertisementOtherFlag OBJECT-TYPE Value of other config field of router advertisement sent from the interface. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.8 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6RouterAdvertisementHopLimitUnspecifiedMode OBJECT-TYPE This object configures the router to send Router Advertisements on an interface with unspecified (0) Current Hop Limit value. This will tell the hosts on that link to ignore the Hop Limit from this Router. | 1.3.6.1.4.1.4413.1.1.30.1.3.1.9 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6AddrPrefixTable OBJECT-TYPE The list of IPv6 address prefixes of IPv6 interfaces. | 1.3.6.1.4.1.4413.1.1.30.1.4 | not-accessible | current | |
| agentIpv6AddrPrefixEntry OBJECT-TYPE An interface entry containing objects of a particular IPv6 address prefix. | 1.3.6.1.4.1.4413.1.1.30.1.4.1 | not-accessible | current | |
| agentIpv6AddrPrefix OBJECT-TYPE The prefix associated with the this interface. | 1.3.6.1.4.1.4413.1.1.30.1.4.1.1 | Ipv6AddressPrefix | not-accessible | current |
| agentIpv6AddrPrefixLength OBJECT-TYPE The length of the prefix (in bits). | 1.3.6.1.4.1.4413.1.1.30.1.4.1.2 | INTEGER (0..128) | not-accessible | current |
| agentIpv6AddrPrefixOnLinkFlag OBJECT-TYPE This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise. | 1.3.6.1.4.1.4413.1.1.30.1.4.1.3 | TruthValue | read-write | current |
| agentIpv6AddrPrefixAutonomousFlag OBJECT-TYPE Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address. | 1.3.6.1.4.1.4413.1.1.30.1.4.1.4 | TruthValue | read-write | current |
| agentIpv6AddrPrefixAdvPreferredLifetime OBJECT-TYPE It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected. | 1.3.6.1.4.1.4413.1.1.30.1.4.1.5 | Unsigned32 | read-write | current |
| agentIpv6AddrPrefixAdvValidLifetime OBJECT-TYPE It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet. | 1.3.6.1.4.1.4413.1.1.30.1.4.1.6 | Unsigned32 | read-write | current |
| agentIpv6AddrTable OBJECT-TYPE The table of addressing information relevant to this node's interface addresses. | 1.3.6.1.4.1.4413.1.1.30.1.5 | not-accessible | current | |
| agentIpv6AddrEntry OBJECT-TYPE The addressing information for one of this node's interface addresses. | 1.3.6.1.4.1.4413.1.1.30.1.5.1 | not-accessible | current | |
| agentIpv6AddrAddress OBJECT-TYPE The IPv6 address to which this entry's addressing information pertains. | 1.3.6.1.4.1.4413.1.1.30.1.5.1.1 | Ipv6Address | not-accessible | current |
| agentIpv6AddrPfxLength OBJECT-TYPE The length of the prefix (in bits) associated with the IPv6 address of this entry. | 1.3.6.1.4.1.4413.1.1.30.1.5.1.2 | INTEGER (0..128) | read-create | current |
| agentIpv6AddrEui64Flag OBJECT-TYPE This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise. | 1.3.6.1.4.1.4413.1.1.30.1.5.1.3 | TruthValue | read-create | current |
| agentIpv6AddrStatus OBJECT-TYPE Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask object must be set during creation. destroy(6) - Removes the associated address from the interface. | 1.3.6.1.4.1.4413.1.1.30.1.5.1.4 | RowStatus | read-create | current |
| agentIpv6StaticRouteTable OBJECT-TYPE IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination. | 1.3.6.1.4.1.4413.1.1.30.1.6 | not-accessible | current | |
| agentIpv6StaticRouteEntry OBJECT-TYPE A routing entry. | 1.3.6.1.4.1.4413.1.1.30.1.6.1 | not-accessible | current | |
| agentIpv6StaticRouteDest OBJECT-TYPE The destination IPv6 address of this route. This object may not take a Multicast address value. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.1 | Ipv6AddressPrefix | not-accessible | current |
| agentIpv6StaticRoutePfxLength OBJECT-TYPE Indicates the prefix length of the destination address. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.2 | INTEGER (0..128) | not-accessible | current |
| agentIpv6StaticRouteIfIndex OBJECT-TYPE The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex. For routes with global address next hop this value can be zero. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.3 | Ipv6IfIndexOrZero | not-accessible | current |
| agentIpv6StaticRouteNextHop OBJECT-TYPE The address of the next system en route. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.4 | Ipv6Address | not-accessible | current |
| agentIpv6StaticRoutePreference OBJECT-TYPE The routing preference metric for this route. A lower value is more preferred. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.5 | INTEGER (1..255) | read-create | current |
| agentIpv6StaticRouteStatus OBJECT-TYPE Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the interface. | 1.3.6.1.4.1.4413.1.1.30.1.6.1.6 | RowStatus | read-create | current |
| agentIpv6ServicePortGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.30.1.7 | |||
| agentIpv6ServicePortPrefixTable OBJECT-TYPE IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.1 | not-accessible | current | |
| agentIpv6ServicePortPrefixEntry OBJECT-TYPE An IPv6 Service Port Prefix entry. | 1.3.6.1.4.1.4413.1.1.30.1.7.1.1 | not-accessible | current | |
| agentIpv6ServicePortPrefixIndex OBJECT-TYPE The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned. | 1.3.6.1.4.1.4413.1.1.30.1.7.1.1.1 | Unsigned32 | not-accessible | current |
| agentIpv6ServicePortPrefix OBJECT-TYPE The Ipv6 Prefix Address configured on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.1.1.2 | Ipv6Address | read-only | current |
| agentIpv6ServicePortPrefixLength OBJECT-TYPE The length of the IPv6 Prefix Address. | 1.3.6.1.4.1.4413.1.1.30.1.7.1.1.3 | Unsigned32 | read-only | current |
| agentIpv6ServicePortDefaultRouterTable OBJECT-TYPE IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.2 | not-accessible | current | |
| agentIpv6ServicePortDefaultRouterEntry OBJECT-TYPE An IPv6 Service Port Default Router entry. | 1.3.6.1.4.1.4413.1.1.30.1.7.2.1 | not-accessible | current | |
| agentIpv6ServicePortDefaultRouterIndex OBJECT-TYPE The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned. | 1.3.6.1.4.1.4413.1.1.30.1.7.2.1.1 | Unsigned32 | not-accessible | current |
| agentIpv6ServicePortDefaultRouter OBJECT-TYPE The Address of the IPv6 Default Router configured on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.2.1.2 | Ipv6Address | read-only | current |
| agentIpv6ServicePortNbrTable OBJECT-TYPE IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.3 | not-accessible | current | |
| agentIpv6ServicePortNbrEntry OBJECT-TYPE An IPv6 Service Port Neighbor entry. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1 | not-accessible | current | |
| agentIpv6ServicePortNbrAddr OBJECT-TYPE The Ipv6 Address of a neighbor switch visible to the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.1 | Ipv6Address | not-accessible | current |
| agentIpv6ServicePortNbrPhysAddr OBJECT-TYPE The MacAddress of the neighboring switch. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.2 | MacAddress | read-only | current |
| agentIpv6ServicePortNbrState OBJECT-TYPE The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.3 | INTEGER {reachable(1), stale(2), delay(3), probe(4), unknown(6)} | read-only | current |
| agentIpv6ServicePortNbrUpdated OBJECT-TYPE The last sysUpTime that this neighbor has been updated. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.4 | TimeStamp | read-only | current |
| agentIpv6ServicePortNbrIsRouter OBJECT-TYPE Returns true(1) if the neighbor machine is a router, false(2) otherwise. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.5 | TruthValue | read-only | current |
| agentIpv6ServicePortNbrType OBJECT-TYPE The type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that the mapping has been statically configured. The local(4) indicates that the mapping is provided for an entity's own interface address. | 1.3.6.1.4.1.4413.1.1.30.1.7.3.1.6 | INTEGER {other(1), dynamic(2), static(3), local(4)} | read-only | current |
| agentIpv6ServicePortNbrCfgTable OBJECT-TYPE The table contains an entry for each static IPv6 Neighbor on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.4 | not-accessible | current | |
| agentIpv6ServicePortNbrCfgEntry OBJECT-TYPE An entry of the static IPv6 Neighbor on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.4.1 | not-accessible | current | |
| agentIpv6ServicePortNbrCfgAddr OBJECT-TYPE The Ipv6 Address of a static neighbor on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.4.1.1 | Ipv6Address | not-accessible | current |
| agentIpv6ServicePortNbrCfgPhysAddr OBJECT-TYPE The MAC Address of a static neighbor on the Service Port. | 1.3.6.1.4.1.4413.1.1.30.1.7.4.1.2 | MacAddress | read-create | current |
| agentIpv6ServicePortNbrCfgEntryStatus OBJECT-TYPE Create or delete the static neighbor entry on the Service Port. The configured static neighbor entry is always active. | 1.3.6.1.4.1.4413.1.1.30.1.7.4.1.3 | RowStatus | read-create | current |
| agentIpv6IcmpControlGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.30.1.8 | |||
| agentIpv6IcmpRateLimitInterval OBJECT-TYPE Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit. | 1.3.6.1.4.1.4413.1.1.30.1.8.1 | Integer32 (0..2147483647) | read-write | current |
| agentIpv6IcmpRateLimitBurstSize OBJECT-TYPE Specifies the number of tokens to be placed after timeout. | 1.3.6.1.4.1.4413.1.1.30.1.8.2 | Integer32 (1..200) | read-write | current |
| agentDhcp6ClientParametersTable OBJECT-TYPE Information about the DHCPv6 Client parameters on the interfaces. | 1.3.6.1.4.1.4413.1.1.30.1.9 | not-accessible | current | |
| agentDhcp6ClientParametersEntry OBJECT-TYPE DHCPv6 Client information on an interface. | 1.3.6.1.4.1.4413.1.1.30.1.9.1 | not-accessible | current | |
| agentDhcp6ClientInterfaceIndex OBJECT-TYPE The Interface index on which the IPv6 address is leased by the DHCPv6 Server. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.1 | Unsigned32 | read-only | current |
| agentDhcp6ClientPrefix OBJECT-TYPE The IPv6 Prefix leased by the DHCPv6 Server. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.2 | Ipv6AddressPrefix | read-only | current |
| agentDhcp6ClientPrefixlength OBJECT-TYPE The Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.3 | INTEGER | read-only | current |
| agentDhcp6ClientState OBJECT-TYPE The State of the DHCPv6 Client on this interface. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.4 | INTEGER {inactive(0), solicit(1), request(2), active(3), renew(4), rebind(5), release(6)} | read-only | current |
| agentDhcp6ClientServerDUID OBJECT-TYPE The DHCPv6 Unique Identifier of the DHCPv6 Server on this interface. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.5 | DisplayString (SIZE(1..255)) | read-only | current |
| agentDhcp6ClientT1Time OBJECT-TYPE The T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval after which the address is requested for renewal. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.6 | Unsigned32 | read-only | current |
| agentDhcp6ClientT2Time OBJECT-TYPE The T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval after which the Client sends Rebind message to the Server incase there are no replies to the Renew messages. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.7 | Unsigned32 | read-only | current |
| agentDhcp6ClientIAID OBJECT-TYPE An identifier for an identity association chosen by this Client. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.8 | Unsigned32 | read-only | current |
| agentDhcp6ClientPreferredLifeTime OBJECT-TYPE The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.9 | Unsigned32 | read-only | current |
| agentDhcp6ClientValidLifeTime OBJECT-TYPE The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.10 | Unsigned32 | read-only | current |
| agentDhcp6ClientRenewTime OBJECT-TYPE The time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.11 | Unsigned32 | read-only | current |
| agentDhcp6ClientExpireTime OBJECT-TYPE The time (in seconds) when the DHCPv6 leased address expires. | 1.3.6.1.4.1.4413.1.1.30.1.9.1.12 | Unsigned32 | read-only | current |
| agentIpv6RoutingTableSummaryGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.30.1.10 | |||
| agentIpv6ConnectedRoutes OBJECT-TYPE The number of connected routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.1 | Gauge32 | read-only | current |
| agentIpv6StaticRoutes OBJECT-TYPE The number of static routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.2 | Gauge32 | read-only | current |
| agentIpv66to4Routes OBJECT-TYPE The number of 6to4 routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.3 | Gauge32 | read-only | current |
| agentIpv6OspfRoutes OBJECT-TYPE The number of OSPFv2 routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.4 | Gauge32 | read-only | current |
| agentIpv6OspfIntraRoutes OBJECT-TYPE The number of OSPFv2 intra-area routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.5 | Gauge32 | read-only | current |
| agentIpv6OspfInterRoutes OBJECT-TYPE The number of OSPFv2 inter-area routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.6 | Gauge32 | read-only | current |
| agentIpv6OspfExt1Routes OBJECT-TYPE The number of OSPFv2 external type 1 routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.7 | Gauge32 | read-only | current |
| agentIpv6OspfExt2Routes OBJECT-TYPE The number of OSPFv2 external type 2 routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.8 | Gauge32 | read-only | current |
| agentIpv6BgpRoutes OBJECT-TYPE The number of BGP routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.9 | Gauge32 | read-only | current |
| agentIpv6EbgpRoutes OBJECT-TYPE The number of external BGP routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.10 | Gauge32 | read-only | current |
| agentIpv6IbgpRoutes OBJECT-TYPE The number of internal BGP routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.11 | Gauge32 | read-only | current |
| agentIpv6LocalBgpRoutes OBJECT-TYPE The number of local BGP routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.12 | Gauge32 | read-only | current |
| agentIpv6RejectRoutes OBJECT-TYPE The number of reject routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.13 | Gauge32 | read-only | current |
| agentIpv6TotalRoutes OBJECT-TYPE The number of routes in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.14 | Gauge32 | read-only | current |
| agentIpv6BestRoutes OBJECT-TYPE The number of IPv6 routes in the forwarding table. | 1.3.6.1.4.1.4413.1.1.30.1.10.15 | Gauge32 | read-only | current |
| agentIpv6BestRoutesHigh OBJECT-TYPE The highest number of IPv6 routes in the forwarding table. | 1.3.6.1.4.1.4413.1.1.30.1.10.16 | Gauge32 | read-only | current |
| agentIpv6AlternateRoutes OBJECT-TYPE The number of alternate routes in the IPv6 routing table. An alternate route is less preferred than the best route and is not used for forwarding. | 1.3.6.1.4.1.4413.1.1.30.1.10.17 | Gauge32 | read-only | current |
| agentIpv6RouteAdds OBJECT-TYPE The number of routes added to the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.18 | Counter32 | read-only | current |
| agentIpv6RouteModifies OBJECT-TYPE The number of routes changed in the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.19 | Counter32 | read-only | current |
| agentIpv6RouteDeletes OBJECT-TYPE The number of routes removed from the IPv6 routing table. | 1.3.6.1.4.1.4413.1.1.30.1.10.20 | Counter32 | read-only | current |
| agentIpv6UnresolvedRouteAdds OBJECT-TYPE The number of IPv6 route adds that failed because none of the route's next hops were on a local subnet. | 1.3.6.1.4.1.4413.1.1.30.1.10.21 | Counter32 | read-only | current |
| agentIpv6InvalidRouteAdds OBJECT-TYPE The number of IPv6 routes adds that failed because the route was invalid. | 1.3.6.1.4.1.4413.1.1.30.1.10.22 | Counter32 | read-only | current |
| agentIpv6FailedRouteAdds OBJECT-TYPE The number of IPv6 routes adds that failed because of a resource limitation in the routing table | 1.3.6.1.4.1.4413.1.1.30.1.10.23 | Counter32 | read-only | current |
| agentIpv6ReservedLocals OBJECT-TYPE The number of IPv6 routing table entries reserved for a local subnet on a routing interface that is down. | 1.3.6.1.4.1.4413.1.1.30.1.10.24 | Gauge32 | read-only | current |
| agentIpv6UniqueNextHops OBJECT-TYPE The number of distinct next hops used among all IPv6 routes currently in the routing table. These include local interfaces for local routes and neighbors for indirect routes. | 1.3.6.1.4.1.4413.1.1.30.1.10.25 | Gauge32 | read-only | current |
| agentIpv6UniqueNextHopsHigh OBJECT-TYPE The highest count of unique next hops since counters were last cleared. | 1.3.6.1.4.1.4413.1.1.30.1.10.26 | Gauge32 | read-only | current |
| agentIpv6NextHopGroups OBJECT-TYPE The current number of next hop groups in use by one or more routes. Each next hop group includes one or more next hops. | 1.3.6.1.4.1.4413.1.1.30.1.10.27 | Gauge32 | read-only | current |
| agentIpv6NextHopGroupsHigh OBJECT-TYPE The highest count of next hop groups since counters were last cleared. | 1.3.6.1.4.1.4413.1.1.30.1.10.28 | Gauge32 | read-only | current |
| agentIpv6EcmpGroups OBJECT-TYPE The number of next hop groups with multiple next hops. | 1.3.6.1.4.1.4413.1.1.30.1.10.29 | Gauge32 | read-only | current |
| agentIpv6EcmpGroupsHigh OBJECT-TYPE The high water mark of the number of ECMP groups. | 1.3.6.1.4.1.4413.1.1.30.1.10.30 | Gauge32 | read-only | current |
| agentIpv6EcmpRoutes OBJECT-TYPE The current number of IPv6 routes with multiple next hops. | 1.3.6.1.4.1.4413.1.1.30.1.10.31 | Gauge32 | read-only | current |
| agentIpv6TruncEcmpRoutes OBJECT-TYPE The number of ECMP routes that are currently installed in the forwarding table with just one next hop. The forwarding table may limit the number of ECMP routes or the number of ECMP groups. When an ECMP route cannot be installed because such a limit is reached, the route is installed with a single next hop. | 1.3.6.1.4.1.4413.1.1.30.1.10.32 | Gauge32 | read-only | current |
| agentIpv6EcmpRetries OBJECT-TYPE The number of ECMP routes that have been installed in the forwarding table after initially being installed with a single next hop. | 1.3.6.1.4.1.4413.1.1.30.1.10.33 | Counter32 | read-only | current |
| agentIpv6EcmpCountTable OBJECT-TYPE A count of the number of routes with each number of ECMP next hops. A walk of this table only returns the entries with a non-zero value for agentIpv6EcmpRouteCount. | 1.3.6.1.4.1.4413.1.1.30.1.11 | not-accessible | current | |
| agentIpv6EcmpCountEntry OBJECT-TYPE Number of IPv6 routes with a given number of next hops. | 1.3.6.1.4.1.4413.1.1.30.1.11.1 | not-accessible | current | |
| agentIpv6EcmpNextHopCount OBJECT-TYPE The number of next hops in a route. From 0 to the maximum number of next hops in an ECMP route. The maximum varies by platform. | 1.3.6.1.4.1.4413.1.1.30.1.11.1.1 | Unsigned32 (0..128) | not-accessible | current |
| agentIpv6EcmpRouteCount OBJECT-TYPE The number of IPv6 routes with agentIpv6EcmpNextHopCount next hops. | 1.3.6.1.4.1.4413.1.1.30.1.11.1.2 | Gauge32 | read-only | current |
| agentIpv6NetworkPortGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.30.1.12 | |||
| agentIpv6NetworkPortNbrTable OBJECT-TYPE IPv6 Network Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Network Port. | 1.3.6.1.4.1.4413.1.1.30.1.12.1 | not-accessible | current | |
| agentIpv6NetworkPortNbrEntry OBJECT-TYPE An IPv6 Network Port Neighbor entry. | 1.3.6.1.4.1.4413.1.1.30.1.12.1.1 | not-accessible | current | |
| agentIpv6NetworkPortNbrAddr OBJECT-TYPE The Ipv6 Address of a neighbor switch visible to the Network Port. | 1.3.6.1.4.1.4413.1.1.30.1.12.1.1.1 | Ipv6Address | not-accessible | current |
| agentIpv6NetworkPortNbrPhysAddr OBJECT-TYPE The MacAddress of the neighboring switch. | 1.3.6.1.4.1.4413.1.1.30.1.12.1.1.2 | MacAddress | read-only | current |
| agentIpv6NetworkPortNbrState OBJECT-TYPE The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status. | 1.3.6.1.4.1.4413.1.1.30.1.12.1.1.3 | INTEGER {reachable(1), stale(2), delay(3), probe(4), unknown(6)} | read-only | current |
| agentIpv6NetworkPortNbrUpdated OBJECT-TYPE The last sysUpTime that this neighbor has been updated. | 1.3.6.1.4.1.4413.1.1.30.1.12.1.1.4 | TimeStamp | read-only | current |
| agentIpv6NetworkPortNbrIsRouter OBJECT-TYPE Returns true(1) if the neighbor machine is a router, false(2) otherwise. | 1.3.6.1.4.1.4413.1.1.30.1.12.1.1.5 | TruthValue | read-only | current |
| agentIpv6NetworkPortNbrType OBJECT-TYPE The type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that the mapping has been statically configured. The local(4) indicates that the mapping is provided for an entity's own interface address. | 1.3.6.1.4.1.4413.1.1.30.1.12.1.1.6 | INTEGER {other(1), dynamic(2), static(3), local(4)} | read-only | current |
| agentIpv6NetworkPortNbrCfgTable OBJECT-TYPE The table contains an entry for each static IPv6 Neighbor on the Network Port. | 1.3.6.1.4.1.4413.1.1.30.1.12.2 | not-accessible | current | |
| agentIpv6NetworkPortNbrCfgEntry OBJECT-TYPE An entry of the static IPv6 Neighbor on the Network Port. | 1.3.6.1.4.1.4413.1.1.30.1.12.2.1 | not-accessible | current | |
| agentIpv6NetworkPortNbrCfgAddr OBJECT-TYPE The Ipv6 Address of a static neighbor on the Network Port. | 1.3.6.1.4.1.4413.1.1.30.1.12.2.1.1 | Ipv6Address | not-accessible | current |
| agentIpv6NetworkPortNbrCfgPhysAddr OBJECT-TYPE The MAC Address of a static neighbor on the Network Port. | 1.3.6.1.4.1.4413.1.1.30.1.12.2.1.2 | MacAddress | read-create | current |
| agentIpv6NetworkPortNbrCfgEntryStatus OBJECT-TYPE Create or delete the static neighbor entry on the Network Port. The configured static neighbor entry is always active. | 1.3.6.1.4.1.4413.1.1.30.1.12.2.1.3 | RowStatus | read-create | current |
| agentIpv6NbrCfgTable OBJECT-TYPE The table contains an entry for each static IPv6 Neighbor on the Network Port. | 1.3.6.1.4.1.4413.1.1.30.1.13 | not-accessible | current | |
| agentIpv6NbrCfgEntry OBJECT-TYPE An entry of the static IPv6 Neighbor on the Network Port. | 1.3.6.1.4.1.4413.1.1.30.1.13.1 | not-accessible | current | |
| agentIpv6IfIndex OBJECT-TYPE A unique non-zero value identifying the particular IPv6 interface. | 1.3.6.1.4.1.4413.1.1.30.1.13.1.1 | Ipv6IfIndex | not-accessible | current |
| agentIpv6NbrCfgAddr OBJECT-TYPE The Ipv6 Address of a static neighbor on the Routing or Host interface. | 1.3.6.1.4.1.4413.1.1.30.1.13.1.2 | Ipv6Address | not-accessible | current |
| agentIpv6NbrCfgPhysAddr OBJECT-TYPE The MAC Address of a static neighbor on the Routing or Host interface. | 1.3.6.1.4.1.4413.1.1.30.1.13.1.3 | MacAddress | read-create | current |
| agentIpv6NbrCfgEntryStatus OBJECT-TYPE Create or delete the static neighbor entry on the Routing or Host interface. The configured static neighbor entry is always active. | 1.3.6.1.4.1.4413.1.1.30.1.13.1.4 | RowStatus | read-create | current |
| agentIpv6NeighborsDynamicRenew OBJECT-TYPE Enables/disables the periodic NUD (neighbor unreachability detection) to be run on the existing IPv6 neighbor entries based on the activity of the entries in the hardware. If the setting is disabled, only those entries that are actively used in the hardware are triggered for NUD. If the setting is enabled, all the entries are triggered for NUD irrespective of their usage in the hardware. | 1.3.6.1.4.1.4413.1.1.30.1.14 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentIpv6UnresolvedDataRateLimit OBJECT-TYPE The rate in packets-per-second for the number of IPv6 data packets trapped to CPU when the packet fails to be forwarded in the hardware due to unresolved hardware address of the destined IPv6 node. | 1.3.6.1.4.1.4413.1.1.30.1.15 | Integer32 (50..1024) | read-write | current |
| agentIpv6NUDMaxUnicastSolicits OBJECT-TYPE The maximum number of unicast Neighbor Solicitations sent during neighbor resolution or during NUD (neighbor unreachabililty detection) before switching to multicast Neighbor Solicitations. | 1.3.6.1.4.1.4413.1.1.30.1.16 | Integer32 (3..10) | read-write | current |
| agentIpv6NUDMaxMulticastSolicits OBJECT-TYPE The maximum number of multicast Neighbor Solicitations sent during neighbor resolution or during NUD (neighbor unreachabililty detection). | 1.3.6.1.4.1.4413.1.1.30.1.17 | Integer32 (3..255) | read-write | current |
| agentIpv6NUDBackoffMultiple OBJECT-TYPE The exponential backoff multiple to be used in the calculation of the next timeout value for Neighbor Solicitation transmission during NUD (neighbor unreachabililty detection) following the exponential backoff algorithm. The next timeout value is limited to a maximum value of 60 seconds if the value with exponential backoff calculation is greater than 60 seconds. | 1.3.6.1.4.1.4413.1.1.30.1.18 | Integer32 (1..5) | read-write | current |