EdgeSwitch-RADIUS-AUTH-CLIENT-MIB
- Registered at
- 1.3.6.1.4.1.4413.1.1.8
- Last updated
- 2014-04-21 00:00
- Organization
- Broadcom Inc
- Revisions
- 2014-04-21 00:00, 2011-12-14 00:00, 2011-09-26 00:00, 2011-01-26 00:00, 2007-05-23 00:00, 2003-11-21 00:00, 2003-05-07 00:00
- Namespace
- edgeswitch
- Source file
EdgeSwitch-RADIUS-AUTH-CLIENT-MIB- Digest
sha256:0ece9a06b352cbd4914cabfd59e942e8cd3d38b71c264537e8bf52f085403463
Description
The Ubiquiti Private MIB for FastPath Radius Authentication Client
Imports
| From | Symbols |
|---|---|
| EdgeSwitch-REF-MIB | fastPath |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EdgeSwitch-RADIUS-AUTH-CLIENT-MIB EdgeSwitch-REF-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| agentRadiusConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.8.1 | |||
| agentRadiusMaxTransmit OBJECT-TYPE Maximum number of retransmissions of a RADIUS request packet | 1.3.6.1.4.1.4413.1.1.8.1.1 | Unsigned32 (1..15) | read-write | current |
| agentRadiusTimeout OBJECT-TYPE Time out duration (in seconds) before packets are retransmitted | 1.3.6.1.4.1.4413.1.1.8.1.2 | Unsigned32 (1..30) | read-write | current |
| agentRadiusAccountingMode OBJECT-TYPE Identifies if RADIUS Accounting has been enabled or not | 1.3.6.1.4.1.4413.1.1.8.1.3 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentRadiusStatsClear OBJECT-TYPE When set to enable(1), all Radius statistics will be reset. | 1.3.6.1.4.1.4413.1.1.8.1.4 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentRadiusAccountingIndexNextValid OBJECT-TYPE Indicates the next valid index into the agentRadiusAccountingConfigTable for creation. If no additional entries are allowed, this will be 0. | 1.3.6.1.4.1.4413.1.1.8.1.5 | Integer32 (0 | 1..2147483647) | read-only | current |
| agentRadiusAccountingConfigTable OBJECT-TYPE Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time. | 1.3.6.1.4.1.4413.1.1.8.1.6 | not-accessible | current | |
| agentRadiusAccountingConfigEntry OBJECT-TYPE Entry consisting of configuration data for a Radius Accounting Server. | 1.3.6.1.4.1.4413.1.1.8.1.6.1 | not-accessible | current | |
| agentRadiusAccountingServerIndex OBJECT-TYPE Unique index of the configured RADIUS accounting server. The next valid value of this object for creation is specified by agentRadiusAccountingIndexNextValid. | 1.3.6.1.4.1.4413.1.1.8.1.6.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| agentRadiusAccountingServerAddress OBJECT-TYPE IP Address of the configured RADIUS accounting server. This object cannot be changed after creation. | 1.3.6.1.4.1.4413.1.1.8.1.6.1.2 | InetAddress | read-create | current |
| agentRadiusAccountingServerAddressType OBJECT-TYPE IP Address Type of the configured RADIUS accounting server. This object cannot be changed after creation. | 1.3.6.1.4.1.4413.1.1.8.1.6.1.3 | InetAddressType | read-create | current |
| agentRadiusAccountingPort OBJECT-TYPE Port number for the RADIUS accounting server. | 1.3.6.1.4.1.4413.1.1.8.1.6.1.4 | Unsigned32 (1..65535) | read-write | current |
| agentRadiusAccountingSecret OBJECT-TYPE Configured shared sercret for the RADIUS accounting server. | 1.3.6.1.4.1.4413.1.1.8.1.6.1.5 | DisplayString (SIZE(1..64)) | read-write | current |
| agentRadiusAccountingStatus OBJECT-TYPE Creates or destroys a RADIUS accounting server entry. During creation, the next available index is specified by the agentRadiusAccountingIndexNextValid object. Rows creation using a different value for agentRadiusAccountingServerIndex will fail. active(1) - This entry is active. createAndGo(4) - Creates a new entry. destroy(6) - Deletes an entry. | 1.3.6.1.4.1.4413.1.1.8.1.6.1.6 | RowStatus | read-create | current |
| agentRadiusAccountingServerName OBJECT-TYPE Configured identification name for the RADIUS Accounting server. | 1.3.6.1.4.1.4413.1.1.8.1.6.1.7 | DisplayString (SIZE(1..32)) | read-create | current |
| agentRadiusServerIndexNextValid OBJECT-TYPE Indicates the next valid index into the agentRadiusServerConfigTable for creation. If no additional entries are allowed, this will be 0. | 1.3.6.1.4.1.4413.1.1.8.1.7 | Integer32 (0 | 1..2147483647) | read-only | current |
| agentRadiusServerConfigTable OBJECT-TYPE Table with information about Radius Authentication Server IP Addresses, port numbers and shared secret | 1.3.6.1.4.1.4413.1.1.8.1.8 | not-accessible | current | |
| agentRadiusServerConfigEntry OBJECT-TYPE Entry consisting of configuration data for a Radius Authentication Server. | 1.3.6.1.4.1.4413.1.1.8.1.8.1 | not-accessible | current | |
| agentRadiusServerIndex OBJECT-TYPE Unique index of the configured RADIUS server | 1.3.6.1.4.1.4413.1.1.8.1.8.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| agentRadiusServerAddress OBJECT-TYPE IP Address of the configured RADIUS server. This object cannot be changed after creation. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.2 | InetAddress | read-create | obsolete |
| agentRadiusServerAddressType OBJECT-TYPE IP Address Type of the configured RADIUS server. This object cannot be changed after creation. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.3 | InetAddressType | read-create | current |
| agentRadiusServerPort OBJECT-TYPE Port number for the RADIUS server. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.4 | Unsigned32 (1..65535) | read-write | current |
| agentRadiusServerSecret OBJECT-TYPE Configured shared sercret for the RADIUS server. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.5 | DisplayString (SIZE(1..64)) | read-write | current |
| agentRadiusServerPrimaryMode OBJECT-TYPE Configure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server and this entry is set Primary. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.6 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentRadiusServerCurrentMode OBJECT-TYPE Indicate if the RADIUS server is the current server in user for authentication. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.7 | INTEGER {yes(1), no(2)} | read-only | current |
| agentRadiusServerMsgAuth OBJECT-TYPE Enable or disable the message authenticator attribute for this RADIUS server. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.8 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentRadiusServerRowStatus OBJECT-TYPE Creates or destroys a RADIUS Authentication server entry. During creation, the next available index is specified by the agentRadiusServerIndexNextValid object. Rows creation using a different value for agentRadiusServerIndex will fail. active(1) - This entry is active. createAndGo(4) - Creates a new entry. destroy(6) - Deletes an entry. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.9 | RowStatus | read-create | current |
| agentRadiusServerName OBJECT-TYPE Configured identification name for the RADIUS server. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.10 | DisplayString (SIZE(1..32)) | read-create | current |
| agentRadiusServerInetAddress OBJECT-TYPE IP Address of the configured RADIUS server. This object cannot be changed after creation. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.11 | InetAddress | read-create | current |
| agentRadiusServerTimeout OBJECT-TYPE Time out duration (in seconds) before packets are retransmitted | 1.3.6.1.4.1.4413.1.1.8.1.8.1.12 | Unsigned32 (1..30) | read-write | current |
| agentRadiusServerRetransmit OBJECT-TYPE Maximum number of retransmissions of a RADIUS request packet | 1.3.6.1.4.1.4413.1.1.8.1.8.1.13 | Unsigned32 (1..10) | read-write | current |
| agentRadiusServerDeadtime OBJECT-TYPE Length of time (in minutes) for which a RADIUS server is skipped over by transaction requests. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.14 | Unsigned32 (0..2000) | read-write | current |
| agentRadiusServerSourceIPAddr OBJECT-TYPE Source IP address that will be used for the communication with RADIUS servers. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.15 | IpAddress | read-write | current |
| agentRadiusServerPriority OBJECT-TYPE Priority specifies the order in which the servers will be used, where 0 is the highest priority in radius server config mode. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.16 | Unsigned32 (0..65535) | read-write | current |
| agentRadiusServerUsageType OBJECT-TYPE Specify the usage type of the server. | 1.3.6.1.4.1.4413.1.1.8.1.8.1.17 | INTEGER {all(1), login(2), dot1x(3)} | read-write | current |
| agentRadiusAuthenticationServers OBJECT-TYPE Number of RADIUS Authentication Servers that have been configured. | 1.3.6.1.4.1.4413.1.1.8.1.9 | Unsigned32 | read-only | current |
| agentRadiusAccountingServers OBJECT-TYPE Number of RADIUS Accounting Servers that have been configured. | 1.3.6.1.4.1.4413.1.1.8.1.10 | Unsigned32 | read-only | current |
| agentRadiusNamedAuthenticationServerGroups OBJECT-TYPE Number of configured RADIUS named Authentication Server groups. | 1.3.6.1.4.1.4413.1.1.8.1.11 | Unsigned32 | read-only | current |
| agentRadiusNamedAccountingServerGroups OBJECT-TYPE Number of configured RADIUS named Accounting Server groups. | 1.3.6.1.4.1.4413.1.1.8.1.12 | Unsigned32 | read-only | current |
| agentRadiusDeadTime OBJECT-TYPE Length of time (in minutes) for which a RADIUS server is skipped over by transaction requests. | 1.3.6.1.4.1.4413.1.1.8.1.13 | Unsigned32 (0..2000) | read-write | current |
| agentRadiusServerKey OBJECT-TYPE RADIUS Server key specifies the authentication and encryption key for all RADIUS communications between the switch and the RADIUS server. This key must match the encryption used on the RADIUS daemon. | 1.3.6.1.4.1.4413.1.1.8.1.14 | DisplayString (SIZE(0..128)) | read-write | obsolete |
| agentRadiusSourceIPAddr OBJECT-TYPE Source IP address that will be used for the communication with RADIUS servers. | 1.3.6.1.4.1.4413.1.1.8.1.15 | IpAddress | read-write | current |
| agentRadiusNasIpAddress OBJECT-TYPE Used to set the NAS-IP address for the radius server. | 1.3.6.1.4.1.4413.1.1.8.1.16 | IpAddress | read-write | current |
| agentAuthorizationNetworkRadiusMode OBJECT-TYPE Used to enable/disable Vlan assignment mode. | 1.3.6.1.4.1.4413.1.1.8.1.17 | INTEGER {disable(0), enable(1)} | read-write | current |
| agentRadiusSourceInterface OBJECT-TYPE A source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface). A non-zero value indicates ifIndex for the corresponding interface entry in the ifTable is selected. A zero value indicates the source-interface un-selection. | 1.3.6.1.4.1.4413.1.1.8.1.18 | InterfaceIndexOrZero | read-write | current |