EdgeSwitch-QOS-ISCSI-MIB
- Registered at
- 1.3.6.1.4.1.4413.1.1.3.5
- Last updated
- 2011-01-26 00:00
- Organization
- Broadcom Inc
- Revisions
- 2011-01-26 00:00, 2009-04-30 00:00
- Namespace
- edgeswitch
- Source file
EdgeSwitch-QOS-ISCSI-MIB- Digest
sha256:002989b3db7d7c1f1e3882789d75da51bc8545d37ca4ac8b253e27091639cefe
Description
The MIB definitions for Quality of Service - iSCSI Flow Acceleration Flex package.
Imports
| From | Symbols |
|---|---|
| EdgeSwitch-QOS-MIB | fastPathQOS |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EdgeSwitch-QOS-ISCSI-MIB EdgeSwitch-QOS-MIB EdgeSwitch-REF-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| QosType TEXTUAL-CONVENTION Type of QoS: VPT or DSCP. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| agentIscsiFlowAccelerationGlobalConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.3.5.1 | |||
| agentIscsiFlowAccelerationEnable OBJECT-TYPE Enable/Disable iSCSI Flow Acceleration globally on the system. | 1.3.6.1.4.1.4413.1.1.3.5.1.1 | TruthValue | read-write | current |
| agentIscsiFlowAccelerationAgingTimeOut OBJECT-TYPE The time in seconds that should pass before session is aged out after the last frame detected for the session. | 1.3.6.1.4.1.4413.1.1.3.5.1.2 | INTEGER (60..2592000) | read-write | current |
| agentIscsiFlowAccelerationQosType OBJECT-TYPE Current type of QoS for iSCSI packets | 1.3.6.1.4.1.4413.1.1.3.5.1.3 | QosType | read-write | current |
| agentIscsiFlowAccelerationQosVptValue OBJECT-TYPE The value of VPT or DSCP, depends on agentIscsiFlowAccelerationQosType, that will be assigned to each iSCSI packet. The range of VPT value is 0..7 | 1.3.6.1.4.1.4413.1.1.3.5.1.4 | Unsigned32 (0..7) | read-write | current |
| agentIscsiFlowAccelerationQosDscpValue OBJECT-TYPE The value of VPT or DSCP, depends on agentIscsiFlowAccelerationQosType, that will be assigned to each iSCSI packet. The range of DSCP value is 0..63 | 1.3.6.1.4.1.4413.1.1.3.5.1.5 | Unsigned32 (0..63) | read-write | current |
| agentIscsiFlowAccelerationQosRemark OBJECT-TYPE Whether iSCSI frames with the configured VPT or DSCP when egressing the switch. | 1.3.6.1.4.1.4413.1.1.3.5.1.6 | TruthValue | read-write | current |
| agentIscsiFlowAccelerationCosEnable OBJECT-TYPE Enable/Disable CoS mode for iSCSI Flow Acceleration globally on the system. | 1.3.6.1.4.1.4413.1.1.3.5.1.7 | TruthValue | read-write | current |
| agentIscsiFlowAccelerationTargetConfigTable OBJECT-TYPE The table for configuration of iSCSI target TCP port number, IP address, and name. It is indexed by agentIscsiFlowAccelerationTargetConfigTcpPort and agentIscsiFlowAccelerationTargetConfigAddr. | 1.3.6.1.4.1.4413.1.1.3.5.2 | not-accessible | current | |
| agentIscsiFlowAccelerationTargetConfigEntry OBJECT-TYPE Row in the iSCSI Target configuration table. | 1.3.6.1.4.1.4413.1.1.3.5.2.1 | not-accessible | current | |
| agentIscsiFlowAccelerationTargetConfigTcpPort OBJECT-TYPE The TCP port of configured target. | 1.3.6.1.4.1.4413.1.1.3.5.2.1.1 | Unsigned32 | not-accessible | current |
| agentIscsiFlowAccelerationTargetConfigAddr OBJECT-TYPE Specifies the target address. If the target address is to be ignored the address should be 0.0.0.0. | 1.3.6.1.4.1.4413.1.1.3.5.2.1.2 | IpAddress | not-accessible | current |
| agentIscsiFlowAccelerationTargetConfigName OBJECT-TYPE The target IQN name. This text is not used to match on network traffic. It serves as an identifying comment for administrative convenience. | 1.3.6.1.4.1.4413.1.1.3.5.2.1.3 | DisplayString (SIZE(0..223)) | read-create | current |
| agentIscsiFlowAccelerationTargetConfigStatus OBJECT-TYPE The status of the target. It's used to add/delete a target. active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance | 1.3.6.1.4.1.4413.1.1.3.5.2.1.4 | RowStatus | read-create | current |
| agentIscsiFlowAccelerationSessionTable OBJECT-TYPE A table that contains iSCSI sessions. It is indexed as assigned by system. | 1.3.6.1.4.1.4413.1.1.3.5.3 | not-accessible | current | |
| agentIscsiFlowAccelerationSessionEntry OBJECT-TYPE An entry in the agentIscsiFlowAccelerationSessionTable. | 1.3.6.1.4.1.4413.1.1.3.5.3.1 | not-accessible | current | |
| agentIscsiFlowAccelerationSessionIndex OBJECT-TYPE Numerical index of session table entry assigned by system. | 1.3.6.1.4.1.4413.1.1.3.5.3.1.1 | Unsigned32 | not-accessible | current |
| agentIscsiFlowAccelerationTargetName OBJECT-TYPE The target name | 1.3.6.1.4.1.4413.1.1.3.5.3.1.2 | DisplayString (SIZE(0..223)) | read-only | current |
| agentIscsiFlowAccelerationInitiatorName OBJECT-TYPE The initiator name | 1.3.6.1.4.1.4413.1.1.3.5.3.1.3 | DisplayString (SIZE(0..223)) | read-only | current |
| agentIscsiFlowAccelerationSessionISID OBJECT-TYPE The ISID of current session. | 1.3.6.1.4.1.4413.1.1.3.5.3.1.4 | OCTET STRING (SIZE(6)) | read-only | current |
| agentIscsiFlowAccelerationSessAgingTime OBJECT-TYPE The elapsed time in seconds since the traffic was detected on any connections associated with this session. | 1.3.6.1.4.1.4413.1.1.3.5.3.1.5 | Unsigned32 | read-only | current |
| agentIscsiFlowAccelerationSessionUpTime OBJECT-TYPE Time elapsed since the session was detected, in seconds. | 1.3.6.1.4.1.4413.1.1.3.5.3.1.6 | Unsigned32 | read-only | current |
| agentIscsiFlowAccelerationConnectionTable OBJECT-TYPE A table that contains iSCSI connections. It is indexed as assigned by system. | 1.3.6.1.4.1.4413.1.1.3.5.4 | not-accessible | current | |
| agentIscsiFlowAccelerationConnectionEntry OBJECT-TYPE An entry in the agentIscsiFlowAccelerationConnectionTable. | 1.3.6.1.4.1.4413.1.1.3.5.4.1 | not-accessible | current | |
| agentIscsiFlowAccelerationConnectionIndex OBJECT-TYPE Numerical index of connection table entry assigned by system. | 1.3.6.1.4.1.4413.1.1.3.5.4.1.1 | Unsigned32 | not-accessible | current |
| agentIscsiFlowAccelerationConnectionTargetAddr OBJECT-TYPE The connection target address. | 1.3.6.1.4.1.4413.1.1.3.5.4.1.2 | IpAddress | read-only | current |
| agentIscsiFlowAccelerationConnectionTargetPort OBJECT-TYPE The TCP port of connection target. | 1.3.6.1.4.1.4413.1.1.3.5.4.1.3 | Unsigned32 | read-only | current |
| agentIscsiFlowAccelerationConnectionInitiatorAddr OBJECT-TYPE The connection initiator address. | 1.3.6.1.4.1.4413.1.1.3.5.4.1.4 | IpAddress | read-only | current |
| agentIscsiFlowAccelerationConnectionInitiatorPort OBJECT-TYPE The TCP port of connection initiator. | 1.3.6.1.4.1.4413.1.1.3.5.4.1.5 | Unsigned32 | read-only | current |
| agentIscsiFlowAccelerationConnectionCID OBJECT-TYPE The iSCSI CID for this connection. | 1.3.6.1.4.1.4413.1.1.3.5.4.1.6 | Unsigned32 | read-only | current |
| agentIscsiFlowAccelerationConnectionSessionIndex OBJECT-TYPE The index of the session associated with this connection. Refers to the index of agentIscsiFlowAccelerationSessionIndex in agentIscsiFlowAccelerationSessionTable. | 1.3.6.1.4.1.4413.1.1.3.5.4.1.7 | Unsigned32 | read-only | current |