EdgeSwitch-INVENTORY-MIB
- Registered at
- 1.3.6.1.4.1.4413.1.1.13
- Last updated
- 2013-10-15 00:00
- Organization
- Broadcom Inc
- Revisions
- 2013-10-15 00:00, 2011-01-26 00:00, 2007-05-23 00:00, 2004-10-28 20:37, 2003-05-26 19:30
- Namespace
- edgeswitch
- Source file
EdgeSwitch-INVENTORY-MIB- Digest
sha256:31ad24f4c3bf76063daff7ecafaea6bf04fc468707e8494cc330fcd5b47be27b
Description
This MIB defines the objects used for FastPath to configure and report information and status of units, slots and supported cards.
Imports
| From | Symbols |
|---|---|
| EdgeSwitch-REF-MIB | fastPath |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EdgeSwitch-INVENTORY-MIB EdgeSwitch-REF-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AgentInventoryCardType TEXTUAL-CONVENTION The Card Type value for a given card, displayed in hexadecimal. | current | |||
| AgentInventoryUnitPreference TEXTUAL-CONVENTION Indicates the preference the unit has for being the management unit in the stack. If the value is 0, it indicates the unit is disabled for management. | current | |||
| AgentInventoryUnitType TEXTUAL-CONVENTION The Unit Type value for a given unit, displayed in hexadecimal. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| agentInventoryTraps OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.0 | |||
| agentInventoryStackGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.1 | |||
| agentInventoryStackReplicateSTK OBJECT-TYPE Initiates STK copy from management unit to all other management capable units in the stack. | 1.3.6.1.4.1.4413.1.1.13.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventoryStackReload OBJECT-TYPE Initiates stack reload. | 1.3.6.1.4.1.4413.1.1.13.1.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventoryStackMaxUnitNumber OBJECT-TYPE Indicates the maximum allowed Unit Number configurable on the stack. | 1.3.6.1.4.1.4413.1.1.13.1.3 | Unsigned32 | read-only | current |
| agentInventoryStackReplicateSTKStatus OBJECT-TYPE Indicates the current status of an STK copy from management unit to all other management capable units inthe stack. | 1.3.6.1.4.1.4413.1.1.13.1.4 | INTEGER {inProgress(1), notInProgress(2), finishedWithSuccess(3), finishedWithError(4)} | read-only | current |
| agentInventoryStackSTKname OBJECT-TYPE STK file on management unit for copy/activate/delete operations to all units in the stack unconfigured(1) - indicates a default state and can not be set. | 1.3.6.1.4.1.4413.1.1.13.1.5 | INTEGER {unconfigured(1), image1(2), image2(3)} | read-write | current |
| agentInventoryStackActivateSTK OBJECT-TYPE Activates the specified STK file on all units on the stack. | 1.3.6.1.4.1.4413.1.1.13.1.6 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventoryStackDeleteSTK OBJECT-TYPE Deletes the specified STK file from all units on the stack. | 1.3.6.1.4.1.4413.1.1.13.1.7 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventoryStackTemplateId OBJECT-TYPE Sets the stack template ID on all units in the stack. Deletes the startup configuration on all affected units and resets all units in the stack. This is write-only value. It always returns '0' on request. | 1.3.6.1.4.1.4413.1.1.13.1.8 | Unsigned32 | read-write | current |
| agentInventoryUnitGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.2 | |||
| agentInventorySupportedUnitTable OBJECT-TYPE TODO | 1.3.6.1.4.1.4413.1.1.13.2.1 | not-accessible | current | |
| agentInventorySupportedUnitEntry OBJECT-TYPE TODO | 1.3.6.1.4.1.4413.1.1.13.2.1.1 | not-accessible | current | |
| agentInventorySupportedUnitIndex OBJECT-TYPE The unit identifier associated with the supported unit. | 1.3.6.1.4.1.4413.1.1.13.2.1.1.1 | Unsigned32 (1..100) | not-accessible | current |
| agentInventorySupportedUnitModelIdentifier OBJECT-TYPE The model identifier for the supported unit. | 1.3.6.1.4.1.4413.1.1.13.2.1.1.4 | DisplayString | read-only | current |
| agentInventorySupportedUnitDescription OBJECT-TYPE The description of the supported unit. | 1.3.6.1.4.1.4413.1.1.13.2.1.1.5 | DisplayString (SIZE(0..80)) | read-only | current |
| agentInventorySupportedUnitExpectedCodeVer OBJECT-TYPE The expected code version. | 1.3.6.1.4.1.4413.1.1.13.2.1.1.6 | DisplayString | read-only | obsolete |
| agentInventoryUnitTable OBJECT-TYPE A table of Per-Unit configuration objects. | 1.3.6.1.4.1.4413.1.1.13.2.2 | not-accessible | current | |
| agentInventoryUnitEntry OBJECT-TYPE Each Instance corresponds with a different unit managed by this agent. | 1.3.6.1.4.1.4413.1.1.13.2.2.1 | not-accessible | current | |
| agentInventoryUnitNumber OBJECT-TYPE The unit number associated with this unit. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.1 | Unsigned32 | not-accessible | current |
| agentInventoryUnitAssignNumber OBJECT-TYPE Allows setting the unit number associated with this unit. This number must be less than the value returned by agentInventoryStackMaxUnitNumber. Setting this object to a non-zero value will initate unit renumbering. The switch will be reset to perform unit renumbering and the configuration of switch interfaces will be cleared. If the unit being renumbered is the manager of the stack, then all the switches in the stack will be reset to perform Manager unit renumbering and the configuration of Manager switch interfaces will be cleared. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.2 | Unsigned32 | read-create | current |
| agentInventoryUnitType OBJECT-TYPE The Unit Type identifier for this unit. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.3 | AgentInventoryUnitType | read-only | current |
| agentInventoryUnitSupportedUnitIndex OBJECT-TYPE The index of the unit type in agentInventorySupportedUnitTable which this unit is associated with. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.4 | Unsigned32 | read-create | current |
| agentInventoryUnitMgmtAdmin OBJECT-TYPE Indicates whether the unit is a Management Unit, a Stack Unit, or has been configured to be a Management Unit. Setting this object to mgmtUnit(1) initiates transfer of the management functionality to the specified stack unit. Object values stackUnit(2) and mgmtUnassigned(3) cannot be set. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.6 | INTEGER {mgmtUnit(1), stackUnit(2), mgmtUnassigned(3)} | read-create | current |
| agentInventoryUnitHWMgmtPref OBJECT-TYPE Indicates the default preference assigned to the unit. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.7 | AgentInventoryUnitPreference | read-only | obsolete |
| agentInventoryUnitHWMgmtPrefValue OBJECT-TYPE Indicates the default preference value assigned to the unit. The preference value indicates how likely this unit is to be chosen as the management unit. A value of 0 indicates a disabled or unassigned preference. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.8 | Unsigned32 (0 | 1..15) | read-only | obsolete |
| agentInventoryUnitAdminMgmtPref OBJECT-TYPE Indicates the configured preference assigned to the unit. This object can not be set to assigned(3). Setting this object to disabled(1), or unassigned(2) will set agentInventoryUnitHWMgmtPrefValue to 0. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.9 | AgentInventoryUnitPreference | read-create | obsolete |
| agentInventoryUnitAdminMgmtPrefValue OBJECT-TYPE Indicates the configured preference value assigned to the unit. The preference value indicates how likely this unit is to be chosen as the management unit. A value of 0 indicates a disabled or unassigned preference. Setting this object to 0 will also set agentInventoryUnitHWMgmtPref to unassigned(2). Setting this object to a non-zero value will set agentInventoryUnitHWMgmtPref to assigned(3). This value overrides the value of agentInventoryUnitHWMgmtPref if assigned. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.10 | Unsigned32 (0 | 1..15) | read-create | obsolete |
| agentInventoryUnitStatus OBJECT-TYPE The unit status of this unit. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.11 | INTEGER {ok(1), unsupported(2), codeMismatch(3), configMismatch(4), sdmMismatch(5), notPresent(6), codeUpdate(7), stmMismatch(8)} | read-only | current |
| agentInventoryUnitDetectedCodeVer OBJECT-TYPE The version of code running on this unit. If the unit is not detected then the code version is an empty string. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.12 | DisplayString | read-only | current |
| agentInventoryUnitDetectedCodeInFlashVer OBJECT-TYPE The version of code that is currently stored in FLASH memory on the unit. This code will execute after the unit is reset. If the unit is not detected then this object will return an empty string. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.13 | DisplayString | read-only | current |
| agentInventoryUnitUpTime OBJECT-TYPE The system up time of the unit. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.14 | TimeTicks | read-only | current |
| agentInventoryUnitDescription OBJECT-TYPE The description of the unit. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.15 | DisplayString (SIZE(0..80)) | read-only | current |
| agentInventoryUnitReplicateSTK OBJECT-TYPE Initiates the specified STK file copy from management unit to this unit. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.16 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventoryUnitReload OBJECT-TYPE Reload a specific unit in the stack. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.17 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventoryUnitRowStatus OBJECT-TYPE The status of this unit instance. Creation of new instances requires the object agentInventoryUnitSupportedUnitIndex to be set at the same time to indicate the type of of unit to pre-configure. active(1) - This instance is active. createAndGo(4) - Creates a new instance. destroy(6) - Removes this instance. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.18 | RowStatus | read-create | current |
| agentInventoryUnitSerialNumber OBJECT-TYPE The Serial Number of the unit. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.19 | DisplayString | read-only | current |
| agentInventoryUnitImage1Version OBJECT-TYPE Code version for Image1. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.20 | DisplayString (SIZE(0..80)) | read-only | current |
| agentInventoryUnitImage2Version OBJECT-TYPE Code version for Image2. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.21 | DisplayString (SIZE(0..80)) | read-only | current |
| agentInventoryUnitSTKname OBJECT-TYPE STK file to be used for copy/delete/activate operatiosn. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.22 | INTEGER {image1(2), image2(3)} | read-write | current |
| agentInventoryUnitActivateSTK OBJECT-TYPE Activates the specified STK file on this unit. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.23 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventoryUnitDeleteSTK OBJECT-TYPE Deletes the specified STK file on this unit. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.24 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventoryUnitReplicateSTKStatus OBJECT-TYPE Indicates the current status of an STK copy from the management unit to another management capable unit in the stack. | 1.3.6.1.4.1.4413.1.1.13.2.2.1.25 | INTEGER {inProgress(1), notInProgress(2), finishedWithSuccess(3), finishedWithError(4)} | read-only | current |
| agentInventoryUnitStandby OBJECT-TYPE Configures the standby status of this unit. The Management unit may not be configured. A unit that is standby_cfg(3) may be set to uassigned(1) to clear standby configuration. A unit that is standby_opr(2) may NOT be set to unassigned(1). | 1.3.6.1.4.1.4413.1.1.13.2.2.1.26 | INTEGER {unassigned(1), standby-opr(2), standby-cfg(3)} | read-write | current |
| agentInventoryUnitSFSTransferStatus OBJECT-TYPE Status parameter to indicate stack firmware synchronization operation status for a particular unit. If SFS transfer is in progress for a particular unit status will be inProgress(2),otherwise status will be noAction(1). | 1.3.6.1.4.1.4413.1.1.13.2.2.1.27 | INTEGER {noAction(1), inProgress(2)} | read-only | current |
| agentInventoryUnitSFSLastAttemptStatus OBJECT-TYPE Status parameter to indicate whether the last synchronization attempt succeeded or failed.If SFS is initated for a particular unit and if it completes successfully this object will return success(2),if SFS operation failed lasttime for this unit,this object will return failure(3).if SFS did not initiate for this unit,this object will retunrn none(1). If activation of the image failed because the underlying bootcode version is older than the minimum boot code version specified in the image, this object returns min-bootcode-version-not-met(4) | 1.3.6.1.4.1.4413.1.1.13.2.2.1.28 | INTEGER {none(1), success(2), failure(3), min-bootcode-version-not-present(4)} | read-only | current |
| agentInventorySlotGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.3 | |||
| agentInventorySlotTable OBJECT-TYPE TODO | 1.3.6.1.4.1.4413.1.1.13.3.1 | not-accessible | current | |
| agentInventorySlotEntry OBJECT-TYPE TODO | 1.3.6.1.4.1.4413.1.1.13.3.1.1 | not-accessible | current | |
| agentInventorySlotNumber OBJECT-TYPE An incrimental index of the slot in this unit. | 1.3.6.1.4.1.4413.1.1.13.3.1.1.1 | Unsigned32 | not-accessible | current |
| agentInventorySlotStatus OBJECT-TYPE Indicates the current status of the slot. | 1.3.6.1.4.1.4413.1.1.13.3.1.1.3 | INTEGER {empty(1), full(2), error(3)} | read-only | current |
| agentInventorySlotPowerMode OBJECT-TYPE Indicates whether a card in this slot will be powered on. | 1.3.6.1.4.1.4413.1.1.13.3.1.1.4 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventorySlotAdminMode OBJECT-TYPE Indicates whether this card is administratively enabled or disabled. | 1.3.6.1.4.1.4413.1.1.13.3.1.1.5 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventorySlotInsertedCardType OBJECT-TYPE Indicates the inserted card type. Will return 0 if the slot is not full. | 1.3.6.1.4.1.4413.1.1.13.3.1.1.6 | AgentInventoryCardType | read-only | current |
| agentInventorySlotConfiguredCardType OBJECT-TYPE Indicates the configured card type. This object may be set with a corresponding value of agentInventoryCardType if this slot supports removable cards. | 1.3.6.1.4.1.4413.1.1.13.3.1.1.7 | AgentInventoryCardType | read-write | current |
| agentInventorySlotCapabilities OBJECT-TYPE Indicates the different capabilities this slot has. pluggable(0) - This slot can contain pluggable cards. power-down(1) - Power to this slot can be controlled through the object agentInventorySlotPowerMode | 1.3.6.1.4.1.4413.1.1.13.3.1.1.8 | Bits {pluggable(0), power-down(1)} | read-only | current |
| agentInventoryCardGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.4 | |||
| agentInventoryCardTypeTable OBJECT-TYPE Contains information for all supported Card Types in the system. | 1.3.6.1.4.1.4413.1.1.13.4.1 | not-accessible | current | |
| agentInventoryCardTypeEntry OBJECT-TYPE Contains information related to a specific Card Type. | 1.3.6.1.4.1.4413.1.1.13.4.1.1 | not-accessible | current | |
| agentInventoryCardIndex OBJECT-TYPE An arbitrary index used to identify cards in the table. | 1.3.6.1.4.1.4413.1.1.13.4.1.1.1 | Unsigned32 | not-accessible | current |
| agentInventoryCardType OBJECT-TYPE The Card Type associated with this instance. | 1.3.6.1.4.1.4413.1.1.13.4.1.1.2 | AgentInventoryCardType | read-only | current |
| agentInventoryCardModelIdentifier OBJECT-TYPE The model identifier for the supported Card Type. | 1.3.6.1.4.1.4413.1.1.13.4.1.1.3 | DisplayString | read-only | current |
| agentInventoryCardDescription OBJECT-TYPE The card description for the supported Card Type. | 1.3.6.1.4.1.4413.1.1.13.4.1.1.4 | DisplayString | read-only | current |
| agentInventoryComponentGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.5 | |||
| agentInventoryComponentTable OBJECT-TYPE Contains information for all supported Components in the system. | 1.3.6.1.4.1.4413.1.1.13.5.1 | not-accessible | current | |
| agentInventoryComponentEntry OBJECT-TYPE Contains information related to a specific Components. | 1.3.6.1.4.1.4413.1.1.13.5.1.1 | not-accessible | current | |
| agentInventoryComponentIndex OBJECT-TYPE An arbitrary index used to reference components in the table. | 1.3.6.1.4.1.4413.1.1.13.5.1.1.1 | Unsigned32 | not-accessible | current |
| agentInventoryComponentMnemonic OBJECT-TYPE The abreviated name of this component. | 1.3.6.1.4.1.4413.1.1.13.5.1.1.2 | DisplayString | read-only | current |
| agentInventoryComponentName OBJECT-TYPE The name of the component for this instance. | 1.3.6.1.4.1.4413.1.1.13.5.1.1.3 | DisplayString | read-only | current |
| fastPathInventoryConformance OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.6 | |||
| fastPathInventoryCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.6.1 | |||
| fastPathInventoryGroups OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.6.2 | |||
| agentInventoryStackPortGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.7 | |||
| agentInventoryStackPortIpTelephonyQOSSupport OBJECT-TYPE Controls whether the Stack Ports give higher priority to IP Telephony traffic. | 1.3.6.1.4.1.4413.1.1.13.7.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventoryStackPortTable OBJECT-TYPE Contains information for all Stack Ports present in the system. | 1.3.6.1.4.1.4413.1.1.13.7.2 | not-accessible | current | |
| agentInventoryStackPortEntry OBJECT-TYPE Contains information related to a specific Stack Port. | 1.3.6.1.4.1.4413.1.1.13.7.2.1 | not-accessible | current | |
| agentInventoryStackPortIndex OBJECT-TYPE An arbitrary index used to reference Stack Ports in the table. | 1.3.6.1.4.1.4413.1.1.13.7.2.1.1 | Unsigned32 | not-accessible | current |
| agentInventoryStackPortUnit OBJECT-TYPE The Unit Index this Stack Port is physically located on. | 1.3.6.1.4.1.4413.1.1.13.7.2.1.2 | Unsigned32 | read-only | current |
| agentInventoryStackPortTag OBJECT-TYPE The name of the Stack Port for this instance. | 1.3.6.1.4.1.4413.1.1.13.7.2.1.3 | DisplayString | read-only | current |
| agentInventoryStackPortConfiguredStackMode OBJECT-TYPE Configured mode of the Stack Port. Changes to this value happen only after a reset of the switch. | 1.3.6.1.4.1.4413.1.1.13.7.2.1.4 | INTEGER {stack(1), ethernet(2)} | read-write | current |
| agentInventoryStackPortRunningStackMode OBJECT-TYPE Currently operational mode of the Stack Port. | 1.3.6.1.4.1.4413.1.1.13.7.2.1.5 | INTEGER {stack(1), ethernet(2)} | read-only | current |
| agentInventoryStackPortLinkStatus OBJECT-TYPE Link status of the Stack Port. Ports which are in ethernet mode will return a status of down(2). | 1.3.6.1.4.1.4413.1.1.13.7.2.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| agentInventoryStackPortLinkSpeed OBJECT-TYPE Speed of the Stack Port measured in Gb/s. Ports which are in ethernet mode will return a speed of 0. | 1.3.6.1.4.1.4413.1.1.13.7.2.1.7 | Gauge32 | read-only | current |
| agentInventoryStackPortDataRate OBJECT-TYPE Approximate data rate on the stacking port. Measured in Gb/s. Ports which are in ethernet mode will return 0. | 1.3.6.1.4.1.4413.1.1.13.7.2.1.8 | Counter32 | read-only | current |
| agentInventoryStackPortErrorRate OBJECT-TYPE Approximate error rate on the stack port. Measured in Errors per Second. Ports which are in ethernet mode will return 0. | 1.3.6.1.4.1.4413.1.1.13.7.2.1.9 | Counter32 | read-only | current |
| agentInventoryStackPortTotalErrors OBJECT-TYPE Number of errors since boot. The counter may wrap. Ports which are in ethernet mode will return 0. | 1.3.6.1.4.1.4413.1.1.13.7.2.1.10 | Counter32 | read-only | current |
| agentInventorySFSGroup OBJECT-IDENTITY | 1.3.6.1.4.1.4413.1.1.13.8 | |||
| agentInventoryStackUnitNumber OBJECT-TYPE The unit number associated with stack unit . | 1.3.6.1.4.1.4413.1.1.13.8.1 | Unsigned32 | not-accessible | current |
| agentInventorySFS OBJECT-TYPE Controls whether the Stack Firmware Synchronization is enabled or disabled. | 1.3.6.1.4.1.4413.1.1.13.8.2 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventorySFSAllowDowngrade OBJECT-TYPE Controls whether downgrading the image on the stack member is allowed or not if the firmware version of manager is older to firmware version of stack member | 1.3.6.1.4.1.4413.1.1.13.8.3 | INTEGER {enable(1), disable(2)} | read-write | current |
| agentInventorySFSTrap OBJECT-TYPE Controls sending of traps during Stack firmware synchronization operation | 1.3.6.1.4.1.4413.1.1.13.8.4 | INTEGER {enable(1), disable(2)} | read-write | current |
Notifications
| Name | OID | Status |
|---|---|---|
| agentInventoryCardMismatch NOTIFICATION-TYPE Sent when a card is inserted which is a different type than what the slot was configured for. | 1.3.6.1.4.1.4413.1.1.13.0.1 | current |
| agentInventoryCardUnsupported NOTIFICATION-TYPE Sent when a card is inserted which is of a type that is not supported by the slot. | 1.3.6.1.4.1.4413.1.1.13.0.2 | current |
| agentInventoryStackPortLinkUp NOTIFICATION-TYPE Sent when a Stack Port is connected to annother Stack Member. | 1.3.6.1.4.1.4413.1.1.13.0.3 | current |
| agentInventoryStackPortLinkDown NOTIFICATION-TYPE Sent when a Stack Port is disconnected from annother Stack Member. | 1.3.6.1.4.1.4413.1.1.13.0.4 | current |
| agentInventorySFSStart NOTIFICATION-TYPE Sent when Stack Firmware Synchronization operation is started on a Stack Member. | 1.3.6.1.4.1.4413.1.1.13.0.5 | current |
| agentInventorySFSComplete NOTIFICATION-TYPE Sent when Stack Firmware Synchronization operation is complete on a Stack Member. | 1.3.6.1.4.1.4413.1.1.13.0.6 | current |
| agentInventorySFSFail NOTIFICATION-TYPE Sent when Stack Firmware Synchronization operation failed for a Stack Member. | 1.3.6.1.4.1.4413.1.1.13.0.7 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| fastPathInventoryCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities which implement version 1 of the fastPathInventory MIB. | 1.3.6.1.4.1.4413.1.1.13.6.1.1 | obsolete |
| fastPathInventoryCompliance2 MODULE-COMPLIANCE The compliance statement for SNMP entities which implement version 2 of the fastPathInventory MIB. | 1.3.6.1.4.1.4413.1.1.13.6.1.2 | current |
| fastPathInventorySupportedUnitGroup OBJECT-GROUP The collection of objects which are used to represent multiple units in the stack. | 1.3.6.1.4.1.4413.1.1.13.6.2.1 | current |
| fastPathInventoryUnitGroup OBJECT-GROUP The collection of objects which are used to represent multiple units in the stack. | 1.3.6.1.4.1.4413.1.1.13.6.2.2 | current |
| fastPathInventorySlotGroup OBJECT-GROUP The collection of objects which are used to represent slots in the each unit managed by this agent. | 1.3.6.1.4.1.4413.1.1.13.6.2.3 | current |
| fastPathInventoryCardGroup OBJECT-GROUP The collection of objects which are used to represent the card types this system can manage. | 1.3.6.1.4.1.4413.1.1.13.6.2.4 | current |
| fastPathInventoryNotificationsGroup NOTIFICATION-GROUP The collection of notifications used to indicate problems associated with the insertion of cards. | 1.3.6.1.4.1.4413.1.1.13.6.2.5 | current |