MIBs Depot

EdgeSwitch-DOT1X-ADVANCED-FEATURES-MIB

Registered at
1.3.6.1.4.1.4413.1.1.36
Last updated
2011-01-26 00:00
Organization
Broadcom Inc
Revisions
2011-01-26 00:00, 2007-05-23 00:00
Namespace
edgeswitch
Source file
EdgeSwitch-DOT1X-ADVANCED-FEATURES-MIB
Digest
sha256:3281306acb160b20abe70c614e2d32ca579540e3ea2b3d296cd72ff636386a9e

Description

The Ubiquiti Private MIB for FastPath Dot1x Advanced Features

Imports

FromSymbols
EdgeSwitch-REF-MIBfastPath
IEEE8021-PAE-MIBdot1xPaePortNumber
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

EdgeSwitch-DOT1X-ADVANCED-FEATURES-MIB
EdgeSwitch-REF-MIB
IANAifType-MIB
IEEE8021-PAE-MIB
IF-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
Dot1xPortControlMode
TEXTUAL-CONVENTION
The control values of the Authenticator PAE controlled Port.
current
Dot1xSessionTerminationAction
TEXTUAL-CONVENTION
The action to be taken on session termination .
current

Objects

NameOIDSyntaxAccessStatus
agentDot1xEnhancementConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.36.1
agentDot1xRadiusVlanAssignment
OBJECT-TYPE
Enable/Disable dot1x Vlan Assignment Support on the switch.
1.3.6.1.4.1.4413.1.1.36.1.1INTEGER {enable(1), disable(2)}read-writecurrent
agentDot1xDynamicVlanCreationMode
OBJECT-TYPE
Enable/Disable dot1x dynamic vlan creation Support on the switch.
1.3.6.1.4.1.4413.1.1.36.1.2INTEGER {enable(1), disable(2)}read-writecurrent
agentDot1xEapolFloodMode
OBJECT-TYPE
Enable/Disable dot1x eapol flooding mode on the switch.
1.3.6.1.4.1.4413.1.1.36.1.3INTEGER {enable(1), disable(2)}read-writecurrent
agentDot1xPortConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.36.2
agentDot1xPortConfigTable
OBJECT-TYPE
A table for dot1x enhanced Port details and associated functionality.
1.3.6.1.4.1.4413.1.1.36.2.1not-accessiblecurrent
agentDot1xPortConfigEntry
OBJECT-TYPE
Represents entry for port config table.
1.3.6.1.4.1.4413.1.1.36.2.1.1not-accessiblecurrent
agentDot1xPortControlMode
OBJECT-TYPE
Dot1x port control mode of this port.The Port control mode . The port control mode for this interface can take the following values , force-unauthorized - the port is in unauthorized mode, auto-Port based mode. If a client authenticates suscessfully, then the interface is authorized . Otherwise, the port is in unauthorized mode. If more than one clients are attached to the port , then only one client needs to authenticate to allow other clients access. force-authorized - The port is placed in authorized mode macBased - If more than one client is attached to the port, then each client needs to authenticate separately. This object depcreates dot1xAuthAuthControlledPortControl object in IEEE8021-PAE-MIB
1.3.6.1.4.1.4413.1.1.36.2.1.1.1Dot1xPortControlModeread-writecurrent
agentDot1xGuestVlanId
OBJECT-TYPE
Specifies the Guest Vlan of the port. A port will be moved to its Guest Vlan if no client sucessfully authenticates on that port for the Guest Vlan Period. A value of zero indicates no Guest Vlan is configured for the interface.
1.3.6.1.4.1.4413.1.1.36.2.1.1.2Unsigned32read-writecurrent
agentDot1xGuestVlanPeriod
OBJECT-TYPE
The value, in seconds, of the guestVlanPeriod constant currently in use for Guest Vlan Assignment for the port .
1.3.6.1.4.1.4413.1.1.36.2.1.1.3Unsigned32 (1..300)read-writecurrent
agentDot1xUnauthenticatedVlan
OBJECT-TYPE
Specifies the Unauthenticated Vlan of the port. A port will be moved to its unauthenticated Vlan if the client authenticates unsucessfully on that port . A value of zero indicates no Unauthenticated Vlan is configured for the port.
1.3.6.1.4.1.4413.1.1.36.2.1.1.4Unsigned32read-writecurrent
agentDot1xMaxUsers
OBJECT-TYPE
Specifies the maximum users or clients that can authenticate on this port when the port control mode is macBased.
1.3.6.1.4.1.4413.1.1.36.2.1.1.5Unsigned32read-writecurrent
agentDot1xPortVlanAssigned
OBJECT-TYPE
Specifies the vlan the port is assigned to by Dot1x . Only relevant if the port control mode of the port is auto.
1.3.6.1.4.1.4413.1.1.36.2.1.1.6Unsigned32read-onlycurrent
agentDot1xPortVlanAssignedReason
OBJECT-TYPE
Reason the port is assigned to the vlan specified by agentDot1xPortVlanAssigned . Only relevant if the port control mode of the port is auto.
1.3.6.1.4.1.4413.1.1.36.2.1.1.7INTEGER {default(1), radius(2), unauthenticatedVlan(3), guestVlan(4), voiceVlan(5), monitorVlan(6), notAssigned(7)}read-onlycurrent
agentDot1xPortSessionTimeout
OBJECT-TYPE
Specifies the session timeout value assigned by the Radius server for this port . Only relevant if the port control mode of the port is auto.
1.3.6.1.4.1.4413.1.1.36.2.1.1.8Unsigned32read-onlycurrent
agentDot1xPortTerminationAction
OBJECT-TYPE
Specifies the session termination action assigned by the Radius Server .This is the action taken when the session times out . Only relevant if the port control mode of the port is auto.
1.3.6.1.4.1.4413.1.1.36.2.1.1.9Dot1xSessionTerminationActionread-onlycurrent
agentDot1xPortMABenabled
OBJECT-TYPE
Specifies if Mac-based bypass authentication is configured for the port.
1.3.6.1.4.1.4413.1.1.36.2.1.1.10INTEGER {enable(1), disable(2)}read-writecurrent
agentDot1xPortMABenabledOperational
OBJECT-TYPE
Displays the operational value of the Mac-based authentication bypass mode (MAB) on the port.
1.3.6.1.4.1.4413.1.1.36.2.1.1.11INTEGER {enable(1), disable(2)}read-onlycurrent
agentDot1xClientConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.36.3
agentDot1xClientConfigTable
OBJECT-TYPE
A table for dot1x Client details and associated functionality.
1.3.6.1.4.1.4413.1.1.36.3.1not-accessiblecurrent
agentDot1xClientConfigEntry
OBJECT-TYPE
Represents entry for port config table.
1.3.6.1.4.1.4413.1.1.36.3.1.1not-accessiblecurrent
agentDot1xClientMacAddress
OBJECT-TYPE
Specifies the client MAC address of the client.
1.3.6.1.4.1.4413.1.1.36.3.1.1.1MacAddressread-onlycurrent
agentDot1xLogicalPort
OBJECT-TYPE
Specifies the client MAC address of the client .
1.3.6.1.4.1.4413.1.1.36.3.1.1.2Unsigned32read-onlycurrent
agentDot1xInterface
OBJECT-TYPE
Specifies the physical interface to which the client is attached .
1.3.6.1.4.1.4413.1.1.36.3.1.1.3Unsigned32read-onlycurrent
agentDot1xClientAuthPAEstate
OBJECT-TYPE
The current value of the Authenticator PAE state machine for the client.
1.3.6.1.4.1.4413.1.1.36.3.1.1.4INTEGER {initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9)}read-onlycurrent
agentDot1xClientBackendState
OBJECT-TYPE
The current state of the Backend Authentication state machine.
1.3.6.1.4.1.4413.1.1.36.3.1.1.5INTEGER {request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7)}read-onlycurrent
agentDot1xClientUserName
OBJECT-TYPE
Specifies the username with which the client is authenticated to the Radius server . This value is only valid when the client is in authenticated state.
1.3.6.1.4.1.4413.1.1.36.3.1.1.6DisplayStringread-onlycurrent
agentDot1xClientSessionTime
OBJECT-TYPE
Specifies the time elapsed in seconds since the client was authenticated in this session. This value is only valid when the client is in authenticated state.
1.3.6.1.4.1.4413.1.1.36.3.1.1.7Unsigned32read-onlycurrent
agentDot1xClientFilterID
OBJECT-TYPE
Specifies the Filter ID or Diffserv Policy name to be applied to the session . This vlaue is populated only if it has been assigned by the RADIUS server. This value is only valid when the client is in authenticated state.
1.3.6.1.4.1.4413.1.1.36.3.1.1.8DisplayStringread-onlycurrent
agentDot1xClientVlanAssigned
OBJECT-TYPE
Specifies the vlan the client is associated with by Dot1x . This value is only valid when the client is in authenticated state.
1.3.6.1.4.1.4413.1.1.36.3.1.1.9Unsigned32read-onlycurrent
agentDot1xClientVlanAssignedReason
OBJECT-TYPE
Reason the client is associated to the vlan specified by agentDot1xClientVlanAssigned . This value is only valid when the client is in authenticated state.
1.3.6.1.4.1.4413.1.1.36.3.1.1.10INTEGER {default(1), radius(2), unauthenticatedVlan(3), monitorVlan(6), invalid(7)}read-onlycurrent
agentDot1xClientSessionTimeout
OBJECT-TYPE
Specifies the session time remaining for the client if assigned by the Radius server . A value of 0 indicates that no session timeout was assigned by the RADIUS server. This value is only valid when the client is in authenticated state.
1.3.6.1.4.1.4413.1.1.36.3.1.1.11Unsigned32read-onlycurrent
agentDot1xClientTerminationAction
OBJECT-TYPE
Specifies the session termination action assigned by the Radius Server . This is the action taken when the session times out . This value is only valid when the client is in authenticated state.
1.3.6.1.4.1.4413.1.1.36.3.1.1.12Dot1xSessionTerminationActionread-onlycurrent
agentDot1xMonitorModeConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.36.4
agentDot1xMonitorModeEnabled
OBJECT-TYPE
Enable/Disable Dot1x Monitor mode Support on the switch.
1.3.6.1.4.1.4413.1.1.36.4.1INTEGER {enable(1), disable(2)}read-writecurrent
agentDot1xMonitorModeClients
OBJECT-TYPE
Retrieves the number of clients that got authenticated by Monitor mode globally.
1.3.6.1.4.1.4413.1.1.36.4.2Unsigned32read-onlycurrent
agentDot1xNonMonitorModeClients
OBJECT-TYPE
Retrieves the number of clients that are granted access by Dot1x with no monitor mode enabled.
1.3.6.1.4.1.4413.1.1.36.4.3Unsigned32read-onlycurrent
agentDot1xAuthHistoryResultsGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4413.1.1.36.5
agentDot1xPortAuthHistoryResultTable
OBJECT-TYPE
A table to display the dot1x monitor mode results.
1.3.6.1.4.1.4413.1.1.36.5.1not-accessiblecurrent
agentDot1xPortAuthHistoryResultEntry
OBJECT-TYPE
Represents Dot1x Authentication results for a Dot1x Authentication History table.
1.3.6.1.4.1.4413.1.1.36.5.1.1not-accessiblecurrent
agentDot1xAuthHistoryResultIfaceIndex
OBJECT-TYPE
This object represents the physical Bridge Port on which dot1x Auth event might be received.
1.3.6.1.4.1.4413.1.1.36.5.1.1.1Unsigned32read-onlycurrent
agentDot1xAuthHistoryResultIndex
OBJECT-TYPE
Reference to the Dot1x Authentication history table maintained.
1.3.6.1.4.1.4413.1.1.36.5.1.1.2Unsigned32read-onlycurrent
agentDot1xAuthHistoryResultTimeStamp
OBJECT-TYPE
Specifies the exact time of Dot1x Authentication event information occurred maintained in the history table.
1.3.6.1.4.1.4413.1.1.36.5.1.1.3DateAndTimeread-onlycurrent
agentDot1xAuthHistoryResultAge
OBJECT-TYPE
Time since the authentication entry was added to the history table. It is displayed in days, hours, minutes, and seconds.
1.3.6.1.4.1.4413.1.1.36.5.1.1.4TimeTicksread-onlycurrent
agentDot1xAuthHistoryResultMacAddress
OBJECT-TYPE
Specifies the client MAC Address maintained in the Dot1x Authentication history table.
1.3.6.1.4.1.4413.1.1.36.5.1.1.5MacAddressread-onlycurrent
agentDot1xAuthHistoryResultVlanId
OBJECT-TYPE
Specifies the VLANID maintained in the history table. It is the VLANID which is failed to associate to the port during authentication process. The VLANID is identified distinctly by the Reason code for the respective entry. Valid only when the reason code is set to 13 (VLAN assignment failure). In all the other cases, VLANID is set to 0.
1.3.6.1.4.1.4413.1.1.36.5.1.1.6Unsigned32read-onlycurrent
agentDot1xAuthHistoryResultAuthStatus
OBJECT-TYPE
Specifies the Dot1x Authentication status (Success or Failure) for the Dot1x Authentication event takes place.
1.3.6.1.4.1.4413.1.1.36.5.1.1.7INTEGER {success(1), failure(2)}read-onlycurrent
agentDot1xAuthHistoryResultAccessStatus
OBJECT-TYPE
Authentication access status indicates the exact status of the dot1x client. Granted means the client is allowed access to the network using dot1x or monitor mode. Denied means the client is not allowed access to the network.
1.3.6.1.4.1.4413.1.1.36.5.1.1.8INTEGER {granted(1), denied(2)}read-onlycurrent
agentDot1xAuthHistoryResultFilterID
OBJECT-TYPE
Specifies the Filter ID or Diffserv Policy name assigned by the RADIUS server. This value is only valid when the client is in authenticated state.
1.3.6.1.4.1.4413.1.1.36.5.1.1.9DisplayStringread-onlycurrent
agentDot1xAuthHistoryResultVlanAssigned
OBJECT-TYPE
Specifies the VLANID maintained in the history table (It is the VLANID Assigned to a Port or Client authenticate).
1.3.6.1.4.1.4413.1.1.36.5.1.1.10Unsigned32read-onlycurrent
agentDot1xAuthHistoryResultVlanAssignedType
OBJECT-TYPE
Specifies the VLAN Assigned Reason maintained in the history table.
1.3.6.1.4.1.4413.1.1.36.5.1.1.11INTEGER {default(1), radius(2), unauthenticatedVlan(3), guestVlan(4), voiceVlan(5), monitorVlan(6), notAssigned(7)}read-onlycurrent
agentDot1xAuthHistoryResultReasonCode
OBJECT-TYPE
Specifies the Dot1x authentication reason refered by the result index on a port.
1.3.6.1.4.1.4413.1.1.36.5.1.1.12INTEGER {supplicant-timeout(1), eapol-timeout(2), radius-request-timeout(3), radius-auth-failure(4), radius-auth-comm-failure(5), radius-challenge-process-invalid-nas-port(6), radius-challenge-process-wrong-eap-msg(7), radius-request-send-msg-error(8), radius-accept-process-invalid-nas-port(9), radius-accept-process-wrong-eap-msg(10), radius-accept-filter-assignment-failure(11), radius-accept-diffserv-not-present(12), radius-accept-vlan-assignment-failure(13), vlan-assignment-feature-not-enabled(14), radius-success(15), local-auth-user-not-found(16), local-auth-user-no-access(17), local-auth-md5-validation-failure(18), local-auth-invalid-eap-type(19), local-failure(20), local-success(21), radius-invalid-radius-status(22), guest-vlan-timer-expiry(23), undefined-auth-method(24), reject-auth-method(25), invalid-auth-method(26), auth-method-not-configured(27), unauth-vlan-not-created(28), guest-vlan-not-created(29), radius-accept-invalid-vlan-failure(30)}read-onlycurrent
agentDot1xAuthHistoryResultsClear
OBJECT-TYPE
When set to enable(1), all Dot1x Authentication History information will be reset.
1.3.6.1.4.1.4413.1.1.36.5.2INTEGER {enable(1), disable(2)}read-writecurrent
agentDot1xPortAuthHistoryResultClearTable
OBJECT-TYPE
A table to clear the dot1x monitor mode results per interface.
1.3.6.1.4.1.4413.1.1.36.5.3not-accessiblecurrent
agentDot1xPortAuthHistoryResultClearEntry
OBJECT-TYPE
Represents to clear the Dot1x Authentication results for a Dot1x Authentication History table.
1.3.6.1.4.1.4413.1.1.36.5.3.1not-accessiblecurrent
agentDot1xAuthHistoryResultIfIndex
OBJECT-TYPE
This object represents the physical Bridge Port on which dot1x Auth event might be received.
1.3.6.1.4.1.4413.1.1.36.5.3.1.1Unsigned32read-onlycurrent
agentDot1xPortAuthHistoryResultsClear
OBJECT-TYPE
When set to enable(1), all Dot1x Authentication History information for the given port will be reset. The value is write-only. Attempt to read will return disable(2).
1.3.6.1.4.1.4413.1.1.36.5.3.1.2INTEGER {enable(1), disable(2)}read-writecurrent