MIBs Depot

EXTREME-WIRELESS-MIB

Registered at
1.3.6.1.4.1.1916.1.25
1.3.6.1.4.1.1916.4.5
Last updated
1902-11-23 00:00
Organization
Extreme Networks, Inc.
Namespace
extreme
Source file
EXTREME-BASE-MIB
Digest
sha256:920ec3f1c764d83d84c3c0ad6a4d3ca2aa2e105baf75bb47bf910c2a7454dbfc

Description

Extreme Wireless Access Tables

Contact

www.extremenetworks.com

Imports

FromSymbols
EXTREME-BASE-MIBClientAuthType, ExtremeDeviceId, WPACipherSet, WPAKeyMgmtSet, WirelessRemoteConnectBindingType, extremeAP, extremeAgent, extremeLAC, extremeV2Traps
IF-MIBInterfaceIndex, ifIndex
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

EXTREME-BASE-MIB
EXTREME-WIRELESS-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.1916.1.25.1extremeAP

Textual conventions

NameOIDSyntaxAccessStatus
Dot11AChannel
TEXTUAL-CONVENTION
Specifies the channel number for 802.11A interface.
current
Dot11AuthMode
TEXTUAL-CONVENTION
Specifies the allowed authentication type.
current
Dot11Speed
TEXTUAL-CONVENTION
Specifies the speed in Mbps to use for the interface. A value of 0 indicates auto.
current
Dot11Type
TEXTUAL-CONVENTION
The current standard supports A, B, G interfaces.
current
ExtremeWirelessAntennaLocation
TEXTUAL-CONVENTION
Specifies whether the antenna is an indoor or outdoor antenna
current
ExtremeWirelessAntennaType
TEXTUAL-CONVENTION
Specifies Antenna type attached to the access-point. The integrated antenna is specified by CTL table on PCI eeprom. The detachable model 15901 is an omni-directional antenna. The detachable model 15902 is a directional antenna.
current
ExtremeWirelessChannelAutoSelectStatus
TEXTUAL-CONVENTION
Specifies the status of the channel auto-selection process.
current
ExtremeWirelessCountryCode
TEXTUAL-CONVENTION
Specifies the country code the AP operates in.
current
ExtremeWirelessPhysInterfaceIndex
TEXTUAL-CONVENTION
The value of a physical interface number. Each radio on an AP corresponds to a physical interface. There can be multiple virtual interface on each physical interface. The format for the physical interface is xxxxyy where xxxx is the port IF index to which the AP is connected. YY is the interface index within that AP.
current
ExtremeWirelessVirtInterfaceIndex
TEXTUAL-CONVENTION
The value of a virtual interface number. Each radio on an AP corresponds to a physical interface. There can be multiple virtual interface on each physical interface. The format for the virtual interface is xxxxyyzz where xxxx is the port IF index to which the AP is connected. YY is the physical interface index within that AP and ZZ is the index of the virtual interface within that physical interface.
current
NetworkAuthMode
TEXTUAL-CONVENTION
Specifies the allowed authentication type.
current

Objects

NameOIDSyntaxAccessStatus
extremeWirelessPortStatusTable
OBJECT-TYPE
This table contains one entry per detected AP.
1.3.6.1.4.1.1916.1.25.1.1not-accessiblecurrent
extremeWirelessPortStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.1.1not-accessiblecurrent
extremeWirelessPortIpAddress
OBJECT-TYPE
This value is assigned to the port for external management.
1.3.6.1.4.1.1916.1.25.1.1.1.1IpAddressread-writecurrent
extremeWirelessPortNetmask
OBJECT-TYPE
This value is assigned to the AP for external management.
1.3.6.1.4.1.1916.1.25.1.1.1.2IpAddressread-writecurrent
extremeWirelessPortGateway
OBJECT-TYPE
This value is assigned to the AP for external management.
1.3.6.1.4.1.1916.1.25.1.1.1.3IpAddressread-writecurrent
extremeWirelessPortManagementIP
OBJECT-TYPE
This value is used by the AP when sending out Management packets to the external world. This IP is used as src-ip address in Syslog messages, as NAS-Identifier in Radius requests, and as Agent-Addr in SNMP trap pdu's.
1.3.6.1.4.1.1916.1.25.1.1.1.4IpAddressread-writecurrent
extremeWirelessPortEnableWirelessTraps
OBJECT-TYPE
If set to TRUE the wireless port will send traps for Authentication and association successful events. If set to FALSE no traps will be generated. Note: We always generate the wireless port status traps.
1.3.6.1.4.1.1916.1.25.1.1.1.5TruthValueread-writecurrent
extremeWirelessPortLocation
OBJECT-TYPE
This describes the physical location of the wireless port.
1.3.6.1.4.1.1916.1.25.1.1.1.6DisplayStringread-writecurrent
extremeWirelessPortDetectedMaxAge
OBJECT-TYPE
This is the number of seconds a station can stay in the detected station table without authenticating.
1.3.6.1.4.1.1916.1.25.1.1.1.7TimeTicksread-writecurrent
extremeWirelessPortMgmtVLAN
OBJECT-TYPE
This value indicates the VLAN tag that should be applied to all control traffic between the AP and the platform.
1.3.6.1.4.1.1916.1.25.1.1.1.8INTEGERread-onlycurrent
extremeWirelessPortBootromVersion
OBJECT-TYPE
This is the current version of the bootrom on this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.9DisplayStringread-onlycurrent
extremeWirelessPortSWVersion
OBJECT-TYPE
This is the current software version of this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.10DisplayStringread-onlycurrent
extremeWirelessPortSysDescr
OBJECT-TYPE
This is the equivalent value of sysDescr from the AP.
1.3.6.1.4.1.1916.1.25.1.1.1.11DisplayStringread-onlycurrent
extremeWirelessPortManufacturerName
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.1.1.12DisplayStringread-onlycurrent
extremeWirelessPortProductName
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.1.1.13DisplayStringread-onlycurrent
extremeWirelessPortSerialNumber
OBJECT-TYPE
This is the unique serial number for this device.
1.3.6.1.4.1.1916.1.25.1.1.1.14DisplayStringread-onlycurrent
extremeWirelessPortEdpNeighborId
OBJECT-TYPE
EDP assigns a unique ID to each neighbor to disambiguate references. This can be used to index into the extremeEdpTable.
1.3.6.1.4.1.1916.1.25.1.1.1.15ExtremeDeviceIdread-onlycurrent
extremeWirelessPortClearCounters
OBJECT-TYPE
This value can be set to true to force the device to reset it's counters. A read will return false.
1.3.6.1.4.1.1916.1.25.1.1.1.16TruthValueread-writecurrent
extremeWirelessPortClearLog
OBJECT-TYPE
This value can be set to true to force the device to clear its local log store. A read will return false.
1.3.6.1.4.1.1916.1.25.1.1.1.17TruthValueread-writecurrent
extremeWirelessPortWatchdogReset
OBJECT-TYPE
This is to enable/disable watchdog timer reset on timeout. Default is enable. If it is enabled, system should reset when the watchdog kicks in. On next bootup, it should send out an syslog message to syslog server. If it is disabled, it should record the error and not reset the system.
1.3.6.1.4.1.1916.1.25.1.1.1.18TruthValueread-writecurrent
extremeWirelessPortNumPhysInterfaces
OBJECT-TYPE
Each wireless port has a set of physical interface which are numbered 1-N. This variable gives the number of physical interfaces on this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.19INTEGERread-onlycurrent
extremeWirelessPortHWVersion
OBJECT-TYPE
This is the current hardware version of this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.20DisplayStringread-onlycurrent
extremeWirelessPortMacAddress
OBJECT-TYPE
Unique MAC Address assigned to the ethernet interface on the AP.
1.3.6.1.4.1.1916.1.25.1.1.1.21MacAddressread-onlycurrent
extremeWirelessPortRadiusPortID
OBJECT-TYPE
A string value that should be sent by the AP to the radius server as the Port-ID radius attribute in authentication requests
1.3.6.1.4.1.1916.1.25.1.1.1.22DisplayStringread-writecurrent
extremeWirelessPortBootUpTime
OBJECT-TYPE
The sysUpTime of the LAC when the port was booted up. Should be set only during the AP boot up.
1.3.6.1.4.1.1916.1.25.1.1.1.23TimeTicksread-writecurrent
extremeWirelessPortCountryCode
OBJECT-TYPE
The country code that the AP is programmed to operate in.
1.3.6.1.4.1.1916.1.25.1.1.1.24ExtremeWirelessCountryCoderead-writecurrent
extremeWirelessPortWallclockTime
OBJECT-TYPE
The wall clock time as known to the LAC. Expressed in number of seconds since Jan 1, 1970
1.3.6.1.4.1.1916.1.25.1.1.1.25INTEGERread-writecurrent
extremeWirelessPortPartNumber
OBJECT-TYPE
This describes the part number of the AP.
1.3.6.1.4.1.1916.1.25.1.1.1.26DisplayStringread-writecurrent
extremeWirelessPortPartRevision
OBJECT-TYPE
This describes the revision of the AP.
1.3.6.1.4.1.1916.1.25.1.1.1.27DisplayStringread-writecurrent
extremeWirelessPortUpTime
OBJECT-TYPE
The number of seconds the port has been in the online state.
1.3.6.1.4.1.1916.1.25.1.1.1.28TimeTicksread-writecurrent
extremeWirelessPortStatusAntennaType
OBJECT-TYPE
This is the type of the Antenna for Detachable product. For Altitude-2d series, further selection is available through this variable.
1.3.6.1.4.1.1916.1.25.1.1.1.29ExtremeWirelessAntennaTyperead-writecurrent
extremeWirelessPortStatusAntennaLocation
OBJECT-TYPE
This specifies the location the detachable antenna.
1.3.6.1.4.1.1916.1.25.1.1.1.30ExtremeWirelessAntennaLocationread-writecurrent
extremeWirelessPortStatusAntenna2point4GHZGain
OBJECT-TYPE
This specifies 2.4GHz gain value for detachable antenna in dbi
1.3.6.1.4.1.1916.1.25.1.1.1.31INTEGERread-createcurrent
extremeWirelessPortStatusAntenna5GHZGain
OBJECT-TYPE
This specifies 5GHz gain value for detachable antenna in dbi
1.3.6.1.4.1.1916.1.25.1.1.1.32INTEGERread-createcurrent
extremeWirelessPortPrimaryBootloaderVersion
OBJECT-TYPE
This is the version of the primary bootloader on this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.33DisplayStringread-onlycurrent
extremeWirelessPortSecondaryBootloaderVersion
OBJECT-TYPE
This is the version of the Secondary bootloader on this AP.
1.3.6.1.4.1.1916.1.25.1.1.1.34DisplayStringread-onlycurrent
extremeWirelessPortCurrentBootloaderInUse
OBJECT-TYPE
This specifies if the bootloader booted is primary or secondary one.
1.3.6.1.4.1.1916.1.25.1.1.1.35INTEGER {primary(1), secondary(2)}read-onlycurrent
extremeWirelessPortLogStatusTable
OBJECT-TYPE
This table contains one entry for each wireless port which is configured via the configuration table.
1.3.6.1.4.1.1916.1.25.1.2not-accessiblecurrent
extremeWirelessPortLogStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.2.1not-accessiblecurrent
extremeWirelessPortLogStatusIndex
OBJECT-TYPE
There are 9 entries in this table to correspond to the 8 entries configured in the cfg table plus one for the LAC.
1.3.6.1.4.1.1916.1.25.1.2.1.1INTEGER (1..9)not-accessiblecurrent
extremeWirelessPortLogStatusDestIp
OBJECT-TYPE
This is the IP address to which syslog messsages will be sent. A value of 0.0.0.0 indicates that this entry is disabled. The source IP for every syslog message comes from the ManagementIP field in extremeWirelessPortStatusTable
1.3.6.1.4.1.1916.1.25.1.2.1.2InetAddressread-writecurrent
extremeWirelessPortLogStatusDestIpType
OBJECT-TYPE
The type of address specified in the object 'extremeWirelessPortLogStatusDestIp. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.25.1.2.1.3InetAddressTyperead-writecurrent
extremeWirelessPortLogStatusPort
OBJECT-TYPE
This is the port to which syslog messages will be sent.
1.3.6.1.4.1.1916.1.25.1.2.1.4INTEGERread-writecurrent
extremeWirelessPortLogStatusFacility
OBJECT-TYPE
Optional value for syslog facility local0-7.
1.3.6.1.4.1.1916.1.25.1.2.1.5INTEGER (0..7)read-writecurrent
extremeWirelessPortLogStatusSeverity
OBJECT-TYPE
The syslog message severity. All syslog messages that have a severity >= specified severity, will be sent to this syslog server.
1.3.6.1.4.1.1916.1.25.1.2.1.6INTEGER {critical(0), error(1), warning(2), notice(3), info(4), debugSummary(5), debugVerbose(6), debugData(7)}read-writecurrent
extremeWirelessPortLogStatusStatus
OBJECT-TYPE
Specifies whether the log server is enabled or not.
1.3.6.1.4.1.1916.1.25.1.2.1.7TruthValueread-writecurrent
extremeWirelessPortLogTable
OBJECT-TYPE
This table allows access to the syslog entries on particular wireless ports.
1.3.6.1.4.1.1916.1.25.1.3not-accessiblecurrent
extremeWirelessPortLogEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.3.1not-accessiblecurrent
extremeWirelessPortLogIndex
OBJECT-TYPE
This is an arbitrary integer which is assinged to entries in order of their insertion.
1.3.6.1.4.1.1916.1.25.1.3.1.1INTEGER (0..65535)not-accessiblecurrent
extremeWirelessPortLogMessage
OBJECT-TYPE
This is the formatted syslog message which was sent.
1.3.6.1.4.1.1916.1.25.1.3.1.2DisplayStringread-onlycurrent
extremeWirelessPhysInterfaceCtlTable
OBJECT-TYPE
This table provides configuration of per-physical interface values.
1.3.6.1.4.1.1916.1.25.1.4not-accessiblecurrent
extremeWirelessPhysInterfaceCtlEntry
OBJECT-TYPE
Each entry is indexed by the wirelessInterfaceIndex, and represents a wireless interface.
1.3.6.1.4.1.1916.1.25.1.4.1not-accessiblecurrent
extremeWirelessPhysInterfaceIndex
OBJECT-TYPE
This is the ifIndex of an individual physical interface on an AP. Each radio will have a unique value.
1.3.6.1.4.1.1916.1.25.1.4.1.1ExtremeWirelessPhysInterfaceIndexaccessible-for-notifycurrent
extremeWirelessPhysInterfacePHYChannel
OBJECT-TYPE
This is the RF channel which will be used by this transmitter. Range should be established by configuration of RegDomain and PHYType.
1.3.6.1.4.1.1916.1.25.1.4.1.2INTEGER (0..99)read-writecurrent
extremeWirelessPhysInterfaceSpeed
OBJECT-TYPE
This value indicates the current setting for Tx speed for the interface. Only one of thebits of this bit set can be set. If all bits are unset (ie a 0 is passed as a value) then it means that the interface should choose a speed based on some algorithm.
1.3.6.1.4.1.1916.1.25.1.4.1.3Dot11Speedread-writecurrent
extremeWirelessPhysInterfaceNumVirtInterfaces
OBJECT-TYPE
Each physical interface has a number of virtual interfaces This specifies the number of virt interfaces.
1.3.6.1.4.1.1916.1.25.1.4.1.4INTEGERread-writecurrent
extremeWirelessPhysInterfaceChannelAutoSelectStatus
OBJECT-TYPE
This OID reflects the status of the channel auto selection process.
1.3.6.1.4.1.1916.1.25.1.4.1.5ExtremeWirelessChannelAutoSelectStatusread-onlycurrent
extremeWirelessPhysInterfaceRadarInterfaceChannelList
OBJECT-TYPE
This OID reflects the list oc 802.11(a) channels on which radar interference was detected.
1.3.6.1.4.1.1916.1.25.1.4.1.6Dot11AChannelread-onlycurrent
extremeWirelessInterfaceStatusTable
OBJECT-TYPE
This table provides statistics and information on the current condition of each wireless interace. There is one entry per virtual and physical wireless interface in this table. The values for the physical interfaces represent the sum of the values for all sub interfaces.
1.3.6.1.4.1.1916.1.25.1.5not-accessiblecurrent
extremeWirelessInterfaceStatusEntry
OBJECT-TYPE
Each entry in this table is indexed by either a virtual or a physical ifIndex.
1.3.6.1.4.1.1916.1.25.1.5.1not-accessiblecurrent
extremeWirelessIntfTotalDetected
OBJECT-TYPE
This gives the total number of stations which have entered the detected state on this wireless interface since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.5.1.1Unsigned32read-onlycurrent
extremeWirelessIntfTotalAuthed
OBJECT-TYPE
This gives the total number of stations which have entered the authenticated state on this wireless interface since the last time the counters were cleared. Note that this is equal to the number of stations which have entered the forwarding state. This is not necessaryly equivalent to the number of stations which have succeeded in MAC-level authentication.
1.3.6.1.4.1.1916.1.25.1.5.1.2Unsigned32read-onlycurrent
extremeWirelessIntfTotalAuthFailed
OBJECT-TYPE
This gives the total number of stations which have failed to authenticate on this wireless interface. Note that no distinction is made between a MAC-layer or higher-layer authentication failure.
1.3.6.1.4.1.1916.1.25.1.5.1.3Unsigned32read-onlycurrent
extremeWirelessIntfTotalAssoc
OBJECT-TYPE
This gives the total number of stations which have entered the associated state on this wireless interface since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.5.1.4Unsigned32read-onlycurrent
extremeWirelessIntfTotalAssocFailed
OBJECT-TYPE
This gives the total number of stations which have failed the association on this wireless interface since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.5.1.5Unsigned32read-onlycurrent
extremeWirelessIntfRateDetected
OBJECT-TYPE
This gives the rate of clients being detected on this interface over a 5 second period using EMWA averaging.
1.3.6.1.4.1.1916.1.25.1.5.1.6Unsigned32read-onlycurrent
extremeWirelessIntfRateAuthed
OBJECT-TYPE
This gives teh rate of clients being authenticated on this interface over a 5 second period using EMWA averaging.
1.3.6.1.4.1.1916.1.25.1.5.1.7Unsigned32read-onlycurrent
extremeWirelessIntfRateAuthFailed
OBJECT-TYPE
This gives the rate of clients failed authentication on this interface over a 5 second period using EMWA averaging.
1.3.6.1.4.1.1916.1.25.1.5.1.8Unsigned32read-onlycurrent
extremeWirelessIntfRateAssoc
OBJECT-TYPE
This gives the rate of clients being associated on this interface over a 5 second period using EMWA averaging.
1.3.6.1.4.1.1916.1.25.1.5.1.9Unsigned32read-onlycurrent
extremeWirelessIntfRateAssocFailed
OBJECT-TYPE
This gives the rate of clients failing association on this interface over a 5 second period using EMWA averaging.
1.3.6.1.4.1.1916.1.25.1.5.1.10Unsigned32read-onlycurrent
extremeWirelessIntfBlockTime
OBJECT-TYPE
This value specifies the number of ticks until traffic will be allowed back on this interface. A non-zero value indicates that traffic has been blocked, most likely due to countermeasures.
1.3.6.1.4.1.1916.1.25.1.5.1.11Unsigned32read-onlycurrent
extremeWirelessIntfCurrentDetected
OBJECT-TYPE
This gives the current number of stations which are in the detected state on this wireless interface.
1.3.6.1.4.1.1916.1.25.1.5.1.12Unsigned32read-onlycurrent
extremeWirelessIntfCurrentAuthed
OBJECT-TYPE
This gives the current number of stations which are in the authenticated state on this wireless interface.
1.3.6.1.4.1.1916.1.25.1.5.1.13Unsigned32read-onlycurrent
extremeWirelessIntfCurrentAssoc
OBJECT-TYPE
This gives the current number of stations which are in the associated state on this wireless interface.
1.3.6.1.4.1.1916.1.25.1.5.1.14Unsigned32read-onlycurrent
extremeWirelessIntfCurrentForwarding
OBJECT-TYPE
This gives the current number of stations which are in the forwarding state on this wireless interface.
1.3.6.1.4.1.1916.1.25.1.5.1.15Unsigned32read-onlycurrent
extremeWirelessVirtInterfaceCtlTable
OBJECT-TYPE
This table provides configuration of per-physical-interface values.
1.3.6.1.4.1.1916.1.25.1.6not-accessiblecurrent
extremeWirelessVirtInterfaceCtlEntry
OBJECT-TYPE
Each entry is indexed by the wirelessInterfaceIndex, and represents a virtual wireless interface.
1.3.6.1.4.1.1916.1.25.1.6.1not-accessiblecurrent
extremeWirelessVirtInterfaceIndex
OBJECT-TYPE
This is the ifIndex of an individual interface on an AP. Each virtual interface will have a unique value.
1.3.6.1.4.1.1916.1.25.1.6.1.1ExtremeWirelessVirtInterfaceIndexaccessible-for-notifycurrent
extremeWirelessVirtInterfaceMacAddress
OBJECT-TYPE
The maximum number of clients that can associate with this virtual interface.
1.3.6.1.4.1.1916.1.25.1.6.1.2MacAddressread-onlycurrent
extremeWirelessVirtInterfaceMaxClients
OBJECT-TYPE
The maximum number of clients that can associate with this virtual interface.
1.3.6.1.4.1.1916.1.25.1.6.1.3INTEGER (1..128)read-writecurrent
extremeWirelessVirtInterfaceWirelessBridging
OBJECT-TYPE
This specifies whether wireless bridging is enabled on this interface. If wireless bridging is enabled then traffic originating from a client on this interface will be bridged to clients on the same VLAN on this or other virtual interfaces that have wireless bridging enabled. So basically wireless bridging should be enabled on both the source and the destination virtual interface for traffic to be bridged.
1.3.6.1.4.1.1916.1.25.1.6.1.4TruthValueread-writecurrent
extremeWirelessVirtInterfaceLastStateChange
OBJECT-TYPE
The value of sysUpTime when the virtual interface entered its current state
1.3.6.1.4.1.1916.1.25.1.6.1.5TimeTicksread-onlycurrent
extremeWirelessVirtInterfaceState
OBJECT-TYPE
This value specifies whether the virtual interface is active or not
1.3.6.1.4.1.1916.1.25.1.6.1.6INTEGER {enabled(1), disabled(2)}read-writecurrent
extremeWirelessVirtInterfaceIappEnabled
OBJECT-TYPE
IAPP status. A value of TRUE indicates IAPP is enabled on the interface.
1.3.6.1.4.1.1916.1.25.1.6.1.7TruthValueread-writecurrent
extremeWirelessVirtInterfaceSvpEnabled
OBJECT-TYPE
SVP status. A value of TRUE indicates SVP is enabled on the interface.
1.3.6.1.4.1.1916.1.25.1.6.1.8TruthValueread-writecurrent
extremeWirelessVirtInterfaceSecurityCtlTable
OBJECT-TYPE
This table provides configuration of per-interface values.
1.3.6.1.4.1.1916.1.25.1.7not-accessiblecurrent
extremeWirelessVirtInterfaceSecurityCtlEntry
OBJECT-TYPE
Each entry is indexed by the wirelessInterfaceIndex, and represents a wireless interface.
1.3.6.1.4.1.1916.1.25.1.7.1not-accessiblecurrent
extremeWirelessVirtInterfaceESSName
OBJECT-TYPE
The ESS ID of this interface.
1.3.6.1.4.1.1916.1.25.1.7.1.1OCTET STRINGread-writecurrent
extremeWirelessVirtInterfaceSSIDInBeacon
OBJECT-TYPE
Does this interface generate a beacon with the SSID in it?
1.3.6.1.4.1.1916.1.25.1.7.1.2TruthValueread-writecurrent
extremeWirelessVirtInterfaceDot11AuthMode
OBJECT-TYPE
Setting this to true indicates whether to use open or shared authentication
1.3.6.1.4.1.1916.1.25.1.7.1.3Dot11AuthModeread-writecurrent
extremeWirelessVirtInterfaceNetworkAuthMode
OBJECT-TYPE
This specifies the authentication mode to use on top of dot11 MAC authentication
1.3.6.1.4.1.1916.1.25.1.7.1.4NetworkAuthModeread-writecurrent
extremeWirelessVirtInterfaceDataVlan
OBJECT-TYPE
This is the VLAN to use for client data in case of the VLAN is not received as a VSA. This VLAN is also used for authentication types like PSK, WEP, etc
1.3.6.1.4.1.1916.1.25.1.7.1.5INTEGERread-writecurrent
extremeWirelessVirtInterfaceIgnoreVSAVlan
OBJECT-TYPE
If this is set then the VLAN returned as a VSA will be ignored and the Data Vlan specified above will be used instead
1.3.6.1.4.1.1916.1.25.1.7.1.6TruthValueread-writecurrent
extremeWirelessVirtInterfaceWEPDefaultKey
OBJECT-TYPE
This value indicates the index in dot11WEPDefaultKeyTable that identifies the key this interface will use to decrypt packets.
1.3.6.1.4.1.1916.1.25.1.7.1.7INTEGERread-writecurrent
extremeWirelessVirtInterfaceEncryptionLength
OBJECT-TYPE
This is the length of the encryption key to use in case of dot1x legacy mode and WEP. If this length is 0 then no WEP encryption.
1.3.6.1.4.1.1916.1.25.1.7.1.8INTEGER {none(0), sixtyfour(64), onetwentyeight(128)}read-writecurrent
extremeWirelessVirtInterfaceDot1xCtlTable
OBJECT-TYPE
There is one entry in this table for each virtual interface It reflects the dot1x security config
1.3.6.1.4.1.1916.1.25.1.8not-accessiblecurrent
extremeWirelessVirtInterfaceDot1xCtlEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.8.1not-accessiblecurrent
extremeWirelessVirtInterfaceKeyMgmtSuite
OBJECT-TYPE
This bitmask configures the authentication suites to be used.
1.3.6.1.4.1.1916.1.25.1.8.1.1WPAKeyMgmtSetread-writecurrent
extremeWirelessVirtInterfaceMcastCipherSuite
OBJECT-TYPE
This configures the cipher suite to use for mcast traffic. The cipher suite to use for unicast traffic is derived from this using the following algorithm: Mcast cipher = WEP (64/128), Unicast cipher = TKIP Mcast cipher = TKIP, Unicast cipher = TKIP Mcast cipher = AES, Unicast cipher = AES. This therefore determines the max unicast cipher suite the client can use to associate with this interface.
1.3.6.1.4.1.1916.1.25.1.8.1.2WPACipherSetread-writecurrent
extremeWirelessVirtInterfaceDot1xPSKValue
OBJECT-TYPE
The Pre-Shared Key (PSK) for when WPA in PSK mode is the selected authentication suite.
1.3.6.1.4.1.1916.1.25.1.8.1.3OCTET STRING (SIZE(32))read-writecurrent
extremeWirelessVirtInterfaceDot1xPSKPassPhrase
OBJECT-TYPE
The PSK, for when WPA in PSK mode is the selected authentication suite, is configured by extremeWirelessVirtInterfaceKeyMgmtSuite. An alternative manner of setting the PSK uses the password-to-key algorithm defined in section XXX. This variable provides a means to enter a pass phrase. When this object is written, the RSN entity shall use the password-to-key algorithm specified in section XXX to derive a pre-shared and populate extremeWirelessVirtInerfaceDot1xPSKValue with this key. This object is logically write-only. Reading this variable shall return unsuccessful status or null or zero.
1.3.6.1.4.1.1916.1.25.1.8.1.4DisplayStringread-writecurrent
extremeWirelessVirtInterfaceDot1xReAuthPeriod
OBJECT-TYPE
Number of seconds a clients authentication will last before the AP automatically issues a reauthentication request.
1.3.6.1.4.1.1916.1.25.1.8.1.5INTEGERread-writecurrent
extremeWirelessVirtInterfaceGroupUpdateTimeOut
OBJECT-TYPE
The time in minutes after which the RSN group update handshake will be retried. The timer shall start at the moment the group update message is sent.
1.3.6.1.4.1.1916.1.25.1.8.1.6Unsigned32 (1..1440)read-writecurrent
extremeWirelessVirtInterfacePairwiseUpdateTimeOut
OBJECT-TYPE
The time in minutes after which the RSN 4-way handshake will be retried. The timer shall start at the moment a 4-way message is sent.
1.3.6.1.4.1.1916.1.25.1.8.1.7Unsigned32 (1..1440)read-writecurrent
extremeWirelessVirtInterfaceDot11iPreauthEnable
OBJECT-TYPE
Enables/Disable 802.11i pre-authentication.
1.3.6.1.4.1.1916.1.25.1.8.1.8TruthValueread-writecurrent
extremeWirelessVirtInterfaceWEPKeyTable
OBJECT-TYPE
This table contains per-profile WEP keys. Reference ieee802dot11.1.2.3.
1.3.6.1.4.1.1916.1.25.1.9not-accessiblecurrent
extremeWirelessVirtInterfaceWEPKeyEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.9.1not-accessiblecurrent
extremeWirelessVirtInterfaceWEPKeyIndex
OBJECT-TYPE
There can be upto 4 wep keys for any wireless interface. Four of the keys are to be used with WEP Authentication, and the other four with MAC Auth.
1.3.6.1.4.1.1916.1.25.1.9.1.1INTEGER (1..4)not-accessiblecurrent
extremeWirelessVirtInterfaceWEPKey
OBJECT-TYPE
This is a write-only wep key.
1.3.6.1.4.1.1916.1.25.1.9.1.2OCTET STRING (SIZE(1..19))read-createcurrent
extremeWirelessVirtInterfaceWEPKeyStatus
OBJECT-TYPE
Specifies whether the key is present or not.
1.3.6.1.4.1.1916.1.25.1.9.1.3TruthValueread-createcurrent
extremeWirelessPhysInterfaceRFCtlTable
OBJECT-TYPE
This table provides configuration of per-interface values.
1.3.6.1.4.1.1916.1.25.1.10not-accessiblecurrent
extremeWirelessPhysInterfaceRFCtlEntry
OBJECT-TYPE
Each entry is indexed by the wirelessInterfaceIndex, and represents a wireless interface.
1.3.6.1.4.1.1916.1.25.1.10.1not-accessiblecurrent
extremeWirelessPhysInterfaceBeaconPeriod
OBJECT-TYPE
This is the beacon interval to use
1.3.6.1.4.1.1916.1.25.1.10.1.1INTEGERread-writecurrent
extremeWirelessPhysInterfaceTxPowerLevel
OBJECT-TYPE
This is the % of max power to transmit at.
1.3.6.1.4.1.1916.1.25.1.10.1.2INTEGER (1..100)read-writecurrent
extremeWirelessPhysInterfaceDTIMPeriod
OBJECT-TYPE
This is the DTIM period.
1.3.6.1.4.1.1916.1.25.1.10.1.3INTEGERread-writecurrent
extremeWirelessPhysInterfaceFragLength
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.10.1.4INTEGERread-writecurrent
extremeWirelessPhysInterfaceLongRetry
OBJECT-TYPE
Attribute indicates the maximum number of transmission attempts of a frame whose size is > RTS.
1.3.6.1.4.1.1916.1.25.1.10.1.5INTEGER (1..255)read-writecurrent
extremeWirelessPhysInterfaceShortRetry
OBJECT-TYPE
Attribute indicates the maximum number of transmission attempts of a frame whose size is <= RTS.
1.3.6.1.4.1.1916.1.25.1.10.1.6INTEGER (1..255)read-writecurrent
extremeWirelessPhysInterfaceRTSThreshold
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.10.1.7INTEGERread-writecurrent
extremeWirelessPhysInterfaceSupportedDataRatesRxValue
OBJECT-TYPE
A bitmask of all supported datarates for Rx.
1.3.6.1.4.1.1916.1.25.1.10.1.8Dot11Speedread-onlycurrent
extremeWirelessPhysInterfaceSupportedDataRatesTxValue
OBJECT-TYPE
A bitmask of all supported datarates for Tx.
1.3.6.1.4.1.1916.1.25.1.10.1.9Dot11Speedread-onlycurrent
extremeWirelessPhysInterfacePHYType
OBJECT-TYPE
This variable selects between 802.11 a/b/g for this transmitter. It should be used by ap to range check frequency, etc.
1.3.6.1.4.1.1916.1.25.1.10.1.10Dot11Typeread-writecurrent
extremeWirelessPhysInterfacePHYSupportedTypes
OBJECT-TYPE
This is the 802.11 standard supported by this interface as a bitmask
1.3.6.1.4.1.1916.1.25.1.10.1.11Bits {bsupported(0), asupported(1), gsupported(2)}read-onlycurrent
extremeWirelessPhysInterfacePreamble
OBJECT-TYPE
This changes the 802 preamble expected by the interface.
1.3.6.1.4.1.1916.1.25.1.10.1.12INTEGER {short(0), long(1)}read-writecurrent
extremeWirelessPhysInterfaceAbsTxPowerLevel
OBJECT-TYPE
This is the absolute value of max power to transmit level in dBm.
1.3.6.1.4.1.1916.1.25.1.10.1.13INTEGERread-onlycurrent
extremeWirelessClientTable
OBJECT-TYPE
This table augments the Dot11AccessPointAddressTableEntry to add a per-client VLAN entry.
1.3.6.1.4.1.1916.1.25.1.11not-accessiblecurrent
extremeWirelessClientEntry
OBJECT-TYPE
An entry in the extremeWirelessClientTable. It is possible for there to be multiple IEEE 802.11 interfaces on one agent, each with its unique MAC address. The relationship between an IEEE 802.11 interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein. by ifIndex.
1.3.6.1.4.1.1916.1.25.1.11.1not-accessiblecurrent
extremeWirelessClientID
OBJECT-TYPE
The Unique MAC Address of the station for which this address table entry pertains.
1.3.6.1.4.1.1916.1.25.1.11.1.1MacAddressread-onlycurrent
extremeWirelessClientState
OBJECT-TYPE
This attribute shall indicate the current state of the connection between a wireless station and the AP. The attribute is enumerated as follows: 1 - Detected - station has been detected, but not is communicating with AP 2 - Authenticated - station is authenticated but not currently associated. 3 - Associated - station is authenticated and associated 4 - Data-forwarding - station is on the network It is assumed that if an station is deauthenticated, or disassociated then it no longer has an entry the AP's Address Table.
1.3.6.1.4.1.1916.1.25.1.11.1.2INTEGER {detected(1), authenticated(2), associated(3), data-forwarding(4)}read-onlycurrent
extremeWirelessClientEncryption
OBJECT-TYPE
This attribute is contains the encryption mechanism being used by the station in an AP that allows mixed encryption modes.
1.3.6.1.4.1.1916.1.25.1.11.1.3WPACipherSetread-onlycurrent
extremeWirelessClientSignalStrength
OBJECT-TYPE
This attribute shall specify the signal strength of the last frame received from the station in - dBm. e.g. a value of 50 implies -50 dBm.
1.3.6.1.4.1.1916.1.25.1.11.1.4INTEGER (1..100)read-onlycurrent
extremeWirelessClientLinkQuality
OBJECT-TYPE
This attribute shall contain an indication of the quality of the signal as measured in the last frame received from the station. TBD format of this attribute
1.3.6.1.4.1.1916.1.25.1.11.1.5INTEGER (1..100)read-onlycurrent
extremeWirelessClientVLAN
OBJECT-TYPE
This is the per-client VLAN which was pushed over by a RADIUS server or other mechanism.
1.3.6.1.4.1.1916.1.25.1.11.1.6INTEGERread-onlycurrent
extremeWirelessClientPriority
OBJECT-TYPE
This is a per-client 802.1p value which was either configured by the RADIUS server or statically through the port configuration table.
1.3.6.1.4.1.1916.1.25.1.11.1.7INTEGERread-onlycurrent
extremeWirelessClientAuthType
OBJECT-TYPE
This is an indication of what access method was used to authenticated the client. The strongest mechanism used should be listed here, in case more than one was used. For example, if a combination of mac-based shared-key and dot1x were used, this value should indicated dot1x.
1.3.6.1.4.1.1916.1.25.1.11.1.8ClientAuthTyperead-onlycurrent
extremeWirelessClientLastStateChangeTime
OBJECT-TYPE
This is the sysUpTime of the switch when the clients state changed last
1.3.6.1.4.1.1916.1.25.1.11.1.9TimeTicksread-onlycurrent
extremeWirelessClientTxFrames
OBJECT-TYPE
This is the number of packets transmitted to the client
1.3.6.1.4.1.1916.1.25.1.11.1.10Counter32read-onlycurrent
extremeWirelessClientRxFrames
OBJECT-TYPE
This is the number of packets transmitted by the client
1.3.6.1.4.1.1916.1.25.1.11.1.11Counter32read-onlycurrent
extremeWirelessClientTxBytes
OBJECT-TYPE
This is the number of bytes transmitted to the client
1.3.6.1.4.1.1916.1.25.1.11.1.12Counter64read-onlycurrent
extremeWirelessClientRxBytes
OBJECT-TYPE
This is the number of bytes transmitted by the client
1.3.6.1.4.1.1916.1.25.1.11.1.13Counter64read-onlycurrent
extremeWirelessClientLastPacketType
OBJECT-TYPE
This the the last packet type seen from the specific client
1.3.6.1.4.1.1916.1.25.1.11.1.14INTEGER {data(0), psPoll(1), probeRequest(2), disassociation(3), deauthentication(4), association(5), reassociation(6), authentication(7)}read-onlycurrent
extremeWirelessClientSSID
OBJECT-TYPE
The SSID that this client was using
1.3.6.1.4.1.1916.1.25.1.11.1.15OCTET STRINGread-onlycurrent
extremeWirelessClientStatus
OBJECT-TYPE
This variable is used to delete an entry from the table. The only value this can be set to, is delete (6). If an entry is deleted, that is already in Associated or data-forwarding state, then the AP should dis-associate the particular client by sending a disassociate message. If an entry is in Authenticated state, and is deleted, then the AP should 'deAuthenticate' that client. If an entry is in 'detected' state and is deleted, then the entry should just be removed from the table.
1.3.6.1.4.1.1916.1.25.1.11.1.16RowStatusread-writecurrent
extremeWirelessClientIP
OBJECT-TYPE
IP Address of the wireless client.
1.3.6.1.4.1.1916.1.25.1.11.1.17IpAddressread-onlycurrent
extremeWirelessClientUsername
OBJECT-TYPE
Username (if any) of the wireless client.
1.3.6.1.4.1.1916.1.25.1.11.1.18DisplayStringread-onlycurrent
extremeWirelessClientDecryptionFailures
OBJECT-TYPE
This is the number of failures during decrypting packets from this client.
1.3.6.1.4.1.1916.1.25.1.11.1.19Counter32read-onlycurrent
extremeWirelessClientMICFailures
OBJECT-TYPE
This is the number of MIC failures for this client.
1.3.6.1.4.1.1916.1.25.1.11.1.20Counter32read-onlycurrent
extremeAPAuthServerTable
OBJECT-TYPE
This table is proxied by the wireless APs. It allows the wireless concentrator to configure the APs security settings.
1.3.6.1.4.1.1916.1.25.1.12not-accessiblecurrent
extremeAPAuthServerEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.12.1not-accessiblecurrent
extremeAPAuthServerIndex
OBJECT-TYPE
Integer representing either primary (1) or backup (2) server.
1.3.6.1.4.1.1916.1.25.1.12.1.1INTEGER (1..2)not-accessiblecurrent
extremeAPAuthServerAddressType
OBJECT-TYPE
The type of address specified in the object 'extremeAuthServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.25.1.12.1.2InetAddressTyperead-onlycurrent
extremeAPAuthServerAddress
OBJECT-TYPE
IP address of the radius server. The act of assigning an IP address enables the client to use the server. Setting this value to 0.0.0.0 disables this entry.
1.3.6.1.4.1.1916.1.25.1.12.1.3InetAddressread-writecurrent
extremeAPAuthServerPort
OBJECT-TYPE
The UDP port number of the remote syslog server to which syslog messages will be sent.
1.3.6.1.4.1.1916.1.25.1.12.1.4INTEGER (0..65535)read-onlycurrent
extremeAPAuthServerSecret
OBJECT-TYPE
This is the shared secret between the Authenticator and radius server. This is logically write-only.
1.3.6.1.4.1.1916.1.25.1.12.1.5OCTET STRINGread-writecurrent
extremeAPAuthServerReTransmit
OBJECT-TYPE
This is the timeout in seconds after which the Authenticator will re transmit requests to the radius server.
1.3.6.1.4.1.1916.1.25.1.12.1.6INTEGERread-writecurrent
extremeAPAuthServerStatus
OBJECT-TYPE
Specifies whether the DNS entry is in use or not
1.3.6.1.4.1.1916.1.25.1.12.1.7TruthValueread-writecurrent
extremeWirelessScanCfgTable
OBJECT-TYPE
This table contains one entry per wireless interface. It allows for configuration of active and passive scan parameters.
1.3.6.1.4.1.1916.1.25.1.24not-accessiblecurrent
extremeWirelessScanCfgEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.24.1not-accessiblecurrent
extremeWirelessScanEnable
OBJECT-TYPE
By setting this to true the wireless interface will collect information from beacons and (possible) probe responses. If this value is set to false this information will not be collected.
1.3.6.1.4.1.1916.1.25.1.24.1.1TruthValueread-writecurrent
extremeWirelessScanSendProbe
OBJECT-TYPE
If this value is set to TRUE the wireless interface will send probe requests to the broadcast SSID every ProbeInterval. The results of these probes will be recorded in the scan results table. If this is false, the AP will only collect information from beacon frames.
1.3.6.1.4.1.1916.1.25.1.24.1.2TruthValueread-writecurrent
extremeWirelessScanProbeInterval
OBJECT-TYPE
This allows for the configuration of the interval over which probe requests will be sent.
1.3.6.1.4.1.1916.1.25.1.24.1.3Unsigned32read-writecurrent
extremeWirelessScanResultTableSize
OBJECT-TYPE
This parameter permits the configuration of the result table size. If there are more entries discovered than there are room for the new entry will replace the oldest entry in the table. In this case a new entry trap will be sent with the OverFlow value set to TRUE.
1.3.6.1.4.1.1916.1.25.1.24.1.4Unsigned32read-writecurrent
extremeWirelessScanResultTimeout
OBJECT-TYPE
By default the scan result table will age out entries which haven't been updated for some time. When an entry is aged out of the table a scanResultAgeOut trap is generated. Setting this value to 0 will disable the aging out of entries.
1.3.6.1.4.1.1916.1.25.1.24.1.5Unsigned32read-writecurrent
extremeWirelessScanResetStats
OBJECT-TYPE
Setting this to TRUE will cause the scan module to reset its internal statistics, as well as the packet counts for each entry in the scan results table. It will *not* remove any entries in the scan table.
1.3.6.1.4.1.1916.1.25.1.24.1.6TruthValueread-writecurrent
extremeWirelessScanClearTable
OBJECT-TYPE
Setting this to TRUE will cause the scan module to reset its internal table. All currently detected stations will be removed. Scan statistics (i.e. watermark) will not be reset.
1.3.6.1.4.1.1916.1.25.1.24.1.7TruthValueread-writecurrent
extremeWirelessScanSendAPAddedTrap
OBJECT-TYPE
Setting this to TRUE will cause the scan module to send a trap whenever a new entry is added to the scan results table. If this value is false the scan module will suppress the trap.
1.3.6.1.4.1.1916.1.25.1.24.1.8TruthValueread-writecurrent
extremeWirelessScanSendAPRemovedTrap
OBJECT-TYPE
Setting this to TRUE will cause the scan module to send a trap whenever an entry is removed from the scan results table.
1.3.6.1.4.1.1916.1.25.1.24.1.9TruthValueread-writecurrent
extremeWirelessScanSendAPUpdatedTrap
OBJECT-TYPE
Setting this to TRUE will cause the scan module to send a trap whenever an entry is updated in the scan results table. This will happen if the list of IEs sent from a particular MAC address changes.
1.3.6.1.4.1.1916.1.25.1.24.1.10TruthValueread-writecurrent
extremeWirelessOffChannelScanCfgTable
OBJECT-TYPE
This table contains one entry per wireless interface. It allows for configuration of off-channel scan. To start an off-channel scan the management station should write values for channel list, min and max wait. Toggling the start value at this point will start an off-channel scan, unless one is already running. Results of the off-channel scan are reported to the scan results table together with the results of passive scan.
1.3.6.1.4.1.1916.1.25.1.25not-accessiblecurrent
extremeWirelessOffChannelScanCfgEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.25.1not-accessiblecurrent
extremeWirelessOffChannelScanStart
OBJECT-TYPE
Setting this to TRUE will cause the scan module to start an off-channel scan. The radio will be disabled for the duration of the scan. The scan module will change to each of the specified channels in order. It will then conduct passive (and perhaps active) scans on that channel for the configured intervals. When the scan is finished the radio will be re-enabled. The scan will wait on each channel for at least MinWait milliseconds even if it sees no traffic on the channel. It will wait for at most MaxWait msecs even if it sees traffic. As a result the best case time for the scan is given by: # Of Channels * extremeWirelessOffChannelScanMinWait The worst case completion time is given by: # Of Channels * extremeWirelessOffChannelScanMaxWait Results of the off-channnel scan a reported to the scan results table.
1.3.6.1.4.1.1916.1.25.1.25.1.1TruthValueread-writecurrent
extremeWirelessOffChannelScanList
OBJECT-TYPE
This value controls the channels which will be scanned during the off-channel scan. Two special values should be noted: all - causes the radio to scan all channels supported by the configured country code. While on each channel the radio will send out probe requests if the value of extremeWirelessScanSendProbeRequest is true. every - causes the radio to scan all channels, even those which are restricted by the country code. The radio will only send probe request on channels that are legal for that country code.
1.3.6.1.4.1.1916.1.25.1.25.1.2Bits {scanAll(0), scanEvery(1), scanChannel1(2), scanChannel2(3), scanChannel3(4), scanChannel4(5), scanChannel5(6), scanChannel6(7), scanChannel7(8), scanChannel8(9), scanChannel9(10), scanChannel10(11), scanChannel11(12), scanChannel12(13), scanChannel13(14), scanChannel14(15), scanChannel34(16), scanChannel36(17), scanChannel40(18), scanChannel44(19), scanChannel48(20), scanChannel52(21), scanChannel56(22), scanChannel60(23), scanChannel64(24), scanChannel100(25), scanChannel104(26), scanChannel108(27), scanChannel113(28), scanChannel116(29), scanChannel120(30), scanChannel124(31), scanChannel128(32), scanChannel132(33), scanChannel140(34), scanChannel149(35), scanChannel153(36), scanChannel157(37), scanChannel161(38), scanChannel165(39)}read-writecurrent
extremeWirelessOffChannelScanMinWait
OBJECT-TYPE
This value controls the minimum time the off-channel scan will wait on a particular channel if it doesn't see any traffic.
1.3.6.1.4.1.1916.1.25.1.25.1.3Unsigned32read-writecurrent
extremeWirelessOffChannelScanMaxWait
OBJECT-TYPE
This value controls the maximum time the off-channel scan will wait on a particular channel even if it is receiving beacons etc.
1.3.6.1.4.1.1916.1.25.1.25.1.4Unsigned32read-writecurrent
extremeWirelessOffChannelContinuous
OBJECT-TYPE
Setting this value to true results in the off-channel scan looping on the configured values until the channel scan is disabled.
1.3.6.1.4.1.1916.1.25.1.25.1.5TruthValueread-writecurrent
extremeWirelessScanStatusTable
OBJECT-TYPE
This table contains one entry per wireless interface. It provides status and statistics information for the scan feature operating on that wireless interface.
1.3.6.1.4.1.1916.1.25.1.26not-accessiblecurrent
extremeWirelessScanStatusEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.26.1not-accessiblecurrent
extremeWirelessScanCurrentTableSize
OBJECT-TYPE
This indicates the current number of entries in the scan results table.
1.3.6.1.4.1.1916.1.25.1.26.1.1Unsigned32read-onlycurrent
extremeWirelessScanTableWatermark
OBJECT-TYPE
This indicates the largest size the results table has reached since the status values have been reset, or the system has booted.
1.3.6.1.4.1.1916.1.25.1.26.1.2Unsigned32read-onlycurrent
extremeWirelessScanTotalOverflows
OBJECT-TYPE
This gives the total number of entries which have been removed to make room for a newer entry. This should be equal to the number of AP added traps the system has generated with the overflow value set to true.
1.3.6.1.4.1.1916.1.25.1.26.1.3Unsigned32read-onlycurrent
extremeWirelessScanTotalTimeouts
OBJECT-TYPE
This gives the total number of entries which have been removed because they have become stale. This should be equal to the number of AP removed traps sent by the system.
1.3.6.1.4.1.1916.1.25.1.26.1.4Unsigned32read-onlycurrent
extremeWirelessScanOffChannelRunning
OBJECT-TYPE
If this value is true it indicates that an off-channel scan is currently running. This implies that the radio is current disabled.
1.3.6.1.4.1.1916.1.25.1.26.1.5TruthValueread-onlycurrent
extremeWirelessScanCurrentChannel
OBJECT-TYPE
If the value of extremeWirelessScanOffChannelRunning is true this variable give the value of the current channel the AP is scanning on. If a scan is not running, the value of this variable is undefined.
1.3.6.1.4.1.1916.1.25.1.26.1.6Unsigned32read-onlycurrent
extremeWirelessScanLastElement
OBJECT-TYPE
This gives the sysUpTime when the last new station was inserted in the results table.
1.3.6.1.4.1.1916.1.25.1.26.1.7TimeTicksread-onlycurrent
extremeWirelessScanNumProbes
OBJECT-TYPE
This gives the number of probe requests sent by this wireless interface.
1.3.6.1.4.1.1916.1.25.1.26.1.8Unsigned32read-onlycurrent
extremeWirelessScanResultsTable
OBJECT-TYPE
This table contains one entry per wireless interface. It provides status and statistics information for the scan feature operating on that wireless interface.
1.3.6.1.4.1.1916.1.25.1.27not-accessiblecurrent
extremeWirelessScanResultsEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.27.1not-accessiblecurrent
extremeWirelessScanResultsStationId
OBJECT-TYPE
This is the MAC address of the detected station.
1.3.6.1.4.1.1916.1.25.1.27.1.1MacAddressread-onlycurrent
extremeWirelessScanResultsFirstSeen
OBJECT-TYPE
This gives the sysUpTime when this station entry was created.
1.3.6.1.4.1.1916.1.25.1.27.1.2TimeTicksread-onlycurrent
extremeWirelessScanResultsLastChange
OBJECT-TYPE
This gives the sysUpTime of the station entry the last time it was updated (i.e. a beacon etc was received).
1.3.6.1.4.1.1916.1.25.1.27.1.3TimeTicksread-onlycurrent
extremeWirelessScanResultsPacketTime
OBJECT-TYPE
This gives the timestamp field from the last beacon/probe response received from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.4INTEGERread-onlycurrent
extremeWirelessScanResultsPacketRate
OBJECT-TYPE
This gives the rate at which the last packet was sent by the station. TODO: What are the units here on rate?
1.3.6.1.4.1.1916.1.25.1.27.1.5INTEGERread-onlycurrent
extremeWirelessScanResultsChannel
OBJECT-TYPE
This gives the channel the last packet received by this station was recieved on.
1.3.6.1.4.1.1916.1.25.1.27.1.6INTEGERread-onlycurrent
extremeWirelessScanResultsMinRSS
OBJECT-TYPE
This is the smallest RSS value of any packet recieved from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.7INTEGERread-onlycurrent
extremeWirelessScanResultsMaxRSS
OBJECT-TYPE
This is the largest RSS value of any packet recieved from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.8INTEGERread-onlycurrent
extremeWirelessScanResultsAvgRSS
OBJECT-TYPE
This is a running average of RSS values of all the packets received from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.9INTEGERread-onlycurrent
extremeWirelessScanResultsTotalBeacons
OBJECT-TYPE
This counter gives the total number of beacons received from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.10Unsigned32read-onlycurrent
extremeWirelessScanResultsTotalProbes
OBJECT-TYPE
This counter gives the total number of probe responses received from this station.
1.3.6.1.4.1.1916.1.25.1.27.1.11Unsigned32read-onlycurrent
extremeWirelessScanResultsDiscoveredBy
OBJECT-TYPE
This gives the type of packet which cause this results entry to be created.
1.3.6.1.4.1.1916.1.25.1.27.1.12INTEGER {probe(1), beacon(2)}read-onlycurrent
extremeWirelessScanResultsDSSOFDM
OBJECT-TYPE
TODO : What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.13TruthValueread-onlycurrent
extremeWirelessScanResultsRSNEnabled
OBJECT-TYPE
Indicates if RSN capabilities are enabled on the sending station.
1.3.6.1.4.1.1916.1.25.1.27.1.14TruthValueread-onlycurrent
extremeWirelessScanResultsGShortSlot
OBJECT-TYPE
TODO : What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.15TruthValueread-onlycurrent
extremeWirelessScanResultsChannelAgility
OBJECT-TYPE
TODO : What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.16TruthValueread-onlycurrent
extremeWirelessScanResultsPBCC
OBJECT-TYPE
TODO : What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.17TruthValueread-onlycurrent
extremeWirelessScanResultsPreamble
OBJECT-TYPE
TODO : What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.18TruthValueread-onlycurrent
extremeWirelessScanResultsPrivacy
OBJECT-TYPE
This is true if MAC-based privacy is invoked on the sending station.
1.3.6.1.4.1.1916.1.25.1.27.1.19TruthValueread-onlycurrent
extremeWirelessScanResultsCFPollReq
OBJECT-TYPE
TODO: What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.20TruthValueread-onlycurrent
extremeWirelessScanResultsCFPollable
OBJECT-TYPE
TODO: What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.21TruthValueread-onlycurrent
extremeWirelessScanResultsNetworkType
OBJECT-TYPE
This indicates what type of network it is. If this value is IBSS the last beacon/probe response was sent by a host operating in ad-hoc mode.
1.3.6.1.4.1.1916.1.25.1.27.1.22INTEGER {ibss(1), bss(2)}read-onlycurrent
extremeWirelessScanResultsSSID
OBJECT-TYPE
This provides the value of the SSID value as is was recieved in the beacon or probe response. If no SSID was sent in the probe this value is NULL.
1.3.6.1.4.1.1916.1.25.1.27.1.23OCTET STRINGread-onlycurrent
extremeWirelessScanResultsRateSet
OBJECT-TYPE
This provides the value of the rate set IE as it was received in the beacon or probe response. If no rate set was recieved then this value is NULL.
1.3.6.1.4.1.1916.1.25.1.27.1.24OCTET STRINGread-onlycurrent
extremeWirelessScanResultsExtRateSet
OBJECT-TYPE
This provides the value of the extended rate set IE as it was received in the beacon or probe response. If no rate set was recieved then this value is NULL.
1.3.6.1.4.1.1916.1.25.1.27.1.25OCTET STRINGread-onlycurrent
extremeWirelessScanResultsDSSParameter
OBJECT-TYPE
Provides the value of the DSS parameter IE, which is the channel.
1.3.6.1.4.1.1916.1.25.1.27.1.26INTEGERread-onlycurrent
extremeWirelessScanResultsTIMCount
OBJECT-TYPE
TODO: What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.27INTEGERread-onlycurrent
extremeWirelessScanResultsTIMPeriod
OBJECT-TYPE
TODO: What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.28INTEGERread-onlycurrent
extremeWirelessScanResultsTIMTrafficInd
OBJECT-TYPE
TODO: What is this?
1.3.6.1.4.1.1916.1.25.1.27.1.29TruthValueread-onlycurrent
extremeWirelessScanResultsCountryCode
OBJECT-TYPE
Value of country code supplied by the IE
1.3.6.1.4.1.1916.1.25.1.27.1.30OCTET STRINGread-onlycurrent
extremeWirelessScanWPAIEPresent
OBJECT-TYPE
If this value is true it indicates that WPA information was gathered from this AP in the last beacon. It implies that the WPA variables below are valid. If this value is false it indicates that this AP did not send a WPA IE in its last beacon, and the values below are meaningless.
1.3.6.1.4.1.1916.1.25.1.27.1.31TruthValueread-onlycurrent
extremeWirelessScanWPAVersion
OBJECT-TYPE
This value gives the version of WPA supported by this AP. See IEEE 802.11i Draft 3.0 section 7 for meaning of various values.
1.3.6.1.4.1.1916.1.25.1.27.1.32Unsigned32read-onlycurrent
extremeWirelessScanWPAIEMcastCipher
OBJECT-TYPE
This value gives the single multicast cipher supported by this AP.
1.3.6.1.4.1.1916.1.25.1.27.1.33WPACipherSetread-onlycurrent
extremeWirelessScanWPAUcastCipherCount
OBJECT-TYPE
This value gives the total number of unicast ciphers supported by this AP. It corresponds to the number of bits set in the extremeWirelessScanWPAUcastCipher variable.
1.3.6.1.4.1.1916.1.25.1.27.1.34Unsigned32read-onlycurrent
extremeWirelessScanWPAUcastCipher
OBJECT-TYPE
This gives the list of cipher suites which are supported by this AP.
1.3.6.1.4.1.1916.1.25.1.27.1.35WPACipherSetread-onlycurrent
extremeWirelessScanWPAKeyMgmtCount
OBJECT-TYPE
This gives the number of key-management schemes supported by this AP. It corresponds to the number of bits set in the extremeWirelessScanWPAKeyMgmtSuite variable.
1.3.6.1.4.1.1916.1.25.1.27.1.36Unsigned32read-onlycurrent
extremeWirelessScanWPAKeyMgmtSuite
OBJECT-TYPE
This indicates the supported key-management suites supported by this AP.
1.3.6.1.4.1.1916.1.25.1.27.1.37WPAKeyMgmtSetread-onlycurrent
extremeWirelessScanResultsIEBlob
OBJECT-TYPE
All the IEs received in the last packet encoded as a blob of Type, Length, Value tuples.
1.3.6.1.4.1.1916.1.25.1.27.1.38OCTET STRINGread-onlycurrent
extremeWirelessProbeInfoCfgTable
OBJECT-TYPE
This table contains one entry per physical and virtual interface. It controls the collection of client information via PROBE REQ packets.
1.3.6.1.4.1.1916.1.25.1.28not-accessiblecurrent
extremeWirelessProbeInfoCfgEntry
OBJECT-TYPE
Note that the ifIndex here can be either a physical or virtual wireless interface index.
1.3.6.1.4.1.1916.1.25.1.28.1not-accessiblecurrent
extremeWirelessProbeInfoEnable
OBJECT-TYPE
If this is set to TRUE then this virtual or physical interface will register with the MAC layer to receive notification of PROBE REQ packets. In the case of a virtual interface this implies the receipt of directed PROBE REQ packets. If set to FALSE no PROBE REQ packets will be received, and current entries will eventually timeout.
1.3.6.1.4.1.1916.1.25.1.28.1.1TruthValueread-writecurrent
extremeWirelessProbeInfoKeepIEs
OBJECT-TYPE
If this value is set to TRUE then the rate IE which is carried in the PROBE REQ packet will be recorded. If FALSE, no rate information will be kept.
1.3.6.1.4.1.1916.1.25.1.28.1.2TruthValueread-writecurrent
extremeWirelessProbeInfoTableSize
OBJECT-TYPE
This value sets the maximum size of the probe info results table, which limits the number of clients this AP can record PROBE REQ information from.
1.3.6.1.4.1.1916.1.25.1.28.1.3Unsigned32read-writecurrent
extremeWirelessProbeInfoTimeout
OBJECT-TYPE
This is the timeout, in seconds, for an entry in the probe info table. Once a PROBE REQ has not been heard from a client in this time period, it's entry is removed. The value 0 is a sentinel, indicating no timeout.
1.3.6.1.4.1.1916.1.25.1.28.1.4Unsigned32read-writecurrent
extremeWirelessProbeInfoTableClear
OBJECT-TYPE
Setting this value to TRUE causes all entries in the probe info table to be removed. Reading this value has no meaning.
1.3.6.1.4.1.1916.1.25.1.28.1.5TruthValueread-writecurrent
extremeWirelessProbeInfoSourceClear
OBJECT-TYPE
Setting this to the value of some MAC address results in any matching MAC address in the probe info table being removed. Reading this value has no meaning.
1.3.6.1.4.1.1916.1.25.1.28.1.6MacAddressread-writecurrent
extremeWirelessProbeInfoTableStatsClear
OBJECT-TYPE
Setting this to TRUE results in all historical statistics in the probe info table being set to 0. No entries will be removed. Reading this has no meaning.
1.3.6.1.4.1.1916.1.25.1.28.1.7TruthValueread-writecurrent
extremeWirelessProbeInfoSourceStatsClear
OBJECT-TYPE
Setting this to a MAC address will clear the historical stats associated with the matching MAC address in the probe info table. Reading this has no meaning.
1.3.6.1.4.1.1916.1.25.1.28.1.8MacAddressread-writecurrent
extremeWirelessProbeInfoSendAddedTrap
OBJECT-TYPE
Setting this to TRUE will cause the management module to send a trap whenever a new PROBE REQ source is added to the probe info table. Setting this to FALSE will suppress the trap.
1.3.6.1.4.1.1916.1.25.1.28.1.9TruthValueread-writecurrent
extremeWirelessProbeInfoSendRemovedTrap
OBJECT-TYPE
Setting this to TRUE will cause the management module to send a trap whenever a PROBE REQ source is removed from the probe info table. Setting this to false will suppress the trap.
1.3.6.1.4.1.1916.1.25.1.28.1.10TruthValueread-writecurrent
extremeWirelessProbeInfoStatusTable
OBJECT-TYPE
This table contains one entry per physical and virtual interface. It gives debugging and status information for the operation of the probe info feature on that interface.
1.3.6.1.4.1.1916.1.25.1.29not-accessiblecurrent
extremeWirelessProbeInfoStatusEntry
OBJECT-TYPE
Note that the ifIndex here can be either a physical or virtual wireless interface index.
1.3.6.1.4.1.1916.1.25.1.29.1not-accessiblecurrent
extremeWirelessProbeInfoStatusCurrentTableSize
OBJECT-TYPE
This gives the current number of entries in the probe info table for this interface.
1.3.6.1.4.1.1916.1.25.1.29.1.1Unsigned32read-onlycurrent
extremeWirelessProbeInfoStatusWatermark
OBJECT-TYPE
This is the maximum size the probe info table has been since the statistics have been reset.
1.3.6.1.4.1.1916.1.25.1.29.1.2Unsigned32read-onlycurrent
extremeWirelessProbeInfoStatusTotalOverflows
OBJECT-TYPE
This gives the number of times an entry in the probe info table was overwritten because the table was full.
1.3.6.1.4.1.1916.1.25.1.29.1.3Unsigned32read-onlycurrent
extremeWirelessProbeInfoStatusTotalTimeouts
OBJECT-TYPE
This gives the number of times an entry in the probe info table was timed out.
1.3.6.1.4.1.1916.1.25.1.29.1.4Unsigned32read-onlycurrent
extremeWirelessProbeInfoStatusLastElement
OBJECT-TYPE
This gives the sysUpTime the last time an entry was added to the probe info table (or modified).
1.3.6.1.4.1.1916.1.25.1.29.1.5TimeTicksread-onlycurrent
extremeWirelessProbeInfoStatusTotalProbes
OBJECT-TYPE
This gives the total number of PROBE REQ packets that this interface has gotten.
1.3.6.1.4.1.1916.1.25.1.29.1.6Unsigned32read-onlycurrent
extremeWirelessProbeInfoTable
OBJECT-TYPE
This table contains one entry for each source MAC from which a PROBE REQ packet has been received. Entries are added when a packet is recieved from a new source mac. Entries are removed via management action, or by timeout or overflow.
1.3.6.1.4.1.1916.1.25.1.30not-accessiblecurrent
extremeWirelessProbeInfoEntry
OBJECT-TYPE
Note that the ifIndex here can be either a physical or virtual wireless interface index. In addition, this table is indexed by the MAC address of the PROBE REQ source.
1.3.6.1.4.1.1916.1.25.1.30.1not-accessiblecurrent
extremeWirelessProbeInfoSource
OBJECT-TYPE
This is the MAC address of the source which sent us the PROBE REQ packets described by this entry.
1.3.6.1.4.1.1916.1.25.1.30.1.1MacAddressread-onlycurrent
extremeWirelessProbeInfoTotalProbes
OBJECT-TYPE
This gives the total number of PROBE REQ packets we have received from this source since the last time the stats were cleared.
1.3.6.1.4.1.1916.1.25.1.30.1.2Unsigned32read-onlycurrent
extremeWirelessProbeInfoTotalProbeResp
OBJECT-TYPE
This gives the total number of PROBE RESP packets we have sent to this source. This may not be equal to PROBE REQ based on rxmit, misses, etc.
1.3.6.1.4.1.1916.1.25.1.30.1.3Unsigned32read-onlycurrent
extremeWirelessProbeInfoRateIESize
OBJECT-TYPE
This gives the size of the rate-ie field in bytes. This may be 0, at which point there is no rate-ie.
1.3.6.1.4.1.1916.1.25.1.30.1.4Unsigned32read-onlycurrent
extremeWirelessProbeInfoRateIE
OBJECT-TYPE
This gives the rate IE as recieved in the last PROBE REQ packet. It is encoded as a TLV exactly as it was in the frame. This field may return NULL if storing of rate IE fields is disabled.
1.3.6.1.4.1.1916.1.25.1.30.1.5OCTET STRINGread-onlycurrent
extremeWirelessProbeInfoFirstSeen
OBJECT-TYPE
This gives the sysUpTime the first time a PROBE REQ was seen from this source.
1.3.6.1.4.1.1916.1.25.1.30.1.6TimeTicksread-onlycurrent
extremeWirelessProbeInfoLastChange
OBJECT-TYPE
This gives the sysUpTime the last time a PROBE REQ was seen from this source.
1.3.6.1.4.1.1916.1.25.1.30.1.7TimeTicksread-onlycurrent
extremeWirelessProbeInfoLastRSS
OBJECT-TYPE
This gives the RSSI from the last PROBE REQ packet received from this station.
1.3.6.1.4.1.1916.1.25.1.30.1.8INTEGERread-onlycurrent
extremeWirelessProbeInfoLastRate
OBJECT-TYPE
This gives the rate at which the last packet was received from this station.
1.3.6.1.4.1.1916.1.25.1.30.1.9INTEGERread-onlycurrent
extremeWirelessProbeInfoLastChannel
OBJECT-TYPE
This gives the channel on which the last PROBE REQ from this station was heard. PROBE REQs may be heard during an off-channel scan, at which point this may not be equal to the current channel.
1.3.6.1.4.1.1916.1.25.1.30.1.10INTEGERread-onlycurrent
extremeWirelessClientDiagCfgTable
OBJECT-TYPE
This table contains one row per wireless interface. Each row contains configuration values for collection of per-client diagnostic information.
1.3.6.1.4.1.1916.1.25.1.31not-accessiblecurrent
extremeWirelessClientDiagCfgEntry
OBJECT-TYPE
There is one entry in this table per virtual interface (SSID).
1.3.6.1.4.1.1916.1.25.1.31.1not-accessiblecurrent
extremeWirelessClientDiagCfgEnable
OBJECT-TYPE
Setting this to TRUE enables the collection of historical information on this virtual interface. This implies that stations which send ASSOC or AUTH packets will have new entries created in the table for this interface.
1.3.6.1.4.1.1916.1.25.1.31.1.1TruthValueread-writecurrent
extremeWirelessClientDiagCfgClearClient
OBJECT-TYPE
Setting this to the MAC address of a client in the diag tables will clear the counters for that client. The entry will not be removed from the table, but all summation counters will be cleared.
1.3.6.1.4.1.1916.1.25.1.31.1.2MacAddressread-writecurrent
extremeWirelessClientDiagCfgTableSize
OBJECT-TYPE
This value will configure the maximum size of the diag table. The value is specified in number of entries. A value of 0 implies no upper limit.
1.3.6.1.4.1.1916.1.25.1.31.1.3Unsigned32read-writecurrent
extremeWirelessClientDiagCfgTimeout
OBJECT-TYPE
This value will configure the timeout of an entry from the diagnostics tables. The value is given in seconds. A value of 0 implies no timeout.
1.3.6.1.4.1.1916.1.25.1.31.1.4Unsigned32read-writecurrent
extremeWirelessClientDiagStatusTable
OBJECT-TYPE
This table contains one entry per virtual interface. Values stored here give current status of the historical client diag feature.
1.3.6.1.4.1.1916.1.25.1.32not-accessiblecurrent
extremeWirelessClientDiagStatusEntry
OBJECT-TYPE
Note that ifIndex here is virtual ifIndex (SSID).
1.3.6.1.4.1.1916.1.25.1.32.1not-accessiblecurrent
extremeWirelessClientDiagCurrentTableSize
OBJECT-TYPE
This is the current size, in entries of the client diag tables.
1.3.6.1.4.1.1916.1.25.1.32.1.1Unsigned32read-onlycurrent
extremeWirelessClientDiagTableWatermark
OBJECT-TYPE
This is the maximum size the client diag table has been since the last time the statistics were cleared.
1.3.6.1.4.1.1916.1.25.1.32.1.2Unsigned32read-onlycurrent
extremeWirelessClientDiagTotalOverflows
OBJECT-TYPE
This is the total number of times an entry has been replaced by a newer entry because there was no room left in the table.
1.3.6.1.4.1.1916.1.25.1.32.1.3Unsigned32read-onlycurrent
extremeWirelessClientDiagTotalTimeouts
OBJECT-TYPE
This is the total number of times an entry has been aged-out of the table.
1.3.6.1.4.1.1916.1.25.1.32.1.4Unsigned32read-onlycurrent
extremeWirelessClientDiagLastElement
OBJECT-TYPE
This is sysUpTime when the last entry was added to the table.
1.3.6.1.4.1.1916.1.25.1.32.1.5TimeTicksread-onlycurrent
extremeWirelessClientDiagSupportsSpeedCounters
OBJECT-TYPE
This value indicates if this AP supports the speed-based counters from the extremeWirelessClientSpeedCountersTable.
1.3.6.1.4.1.1916.1.25.1.32.1.6TruthValueread-onlycurrent
extremeWirelessClientDiagSupportsSizeCounters
OBJECT-TYPE
This value indicates if this AP supports the size-based counters from the extremeWirelessClientMACSizeCounterTable.
1.3.6.1.4.1.1916.1.25.1.32.1.7TruthValueread-onlycurrent
extremeWirelessClientDiagSupportsPacketCounters
OBJECT-TYPE
This value indicates if this AP supports the packet-based counters from the extremeWirelessClientPacketCountersTable.
1.3.6.1.4.1.1916.1.25.1.32.1.8TruthValueread-onlycurrent
extremeWirelessClientDiagTable
OBJECT-TYPE
This table contains information on a per-client basis. Rows are indexed first by virtual interface, then by client MAC.
1.3.6.1.4.1.1916.1.25.1.33not-accessiblecurrent
extremeWirelessClientDiagEntry
OBJECT-TYPE
Note that ifIndex here is virtual ifIndex (SSID).
1.3.6.1.4.1.1916.1.25.1.33.1not-accessiblecurrent
extremeWirelessClientDiagMac
OBJECT-TYPE
This is the MAC address of the station this entry describes.
1.3.6.1.4.1.1916.1.25.1.33.1.1MacAddressread-onlycurrent
extremeWirelessClientDiagStateWatermark
OBJECT-TYPE
This is the highest state this client has been in.
1.3.6.1.4.1.1916.1.25.1.33.1.2INTEGERread-onlycurrent
extremeWirelessClientDiagEntersInDetected
OBJECT-TYPE
This is the total number of times the client has entered the detected state.
1.3.6.1.4.1.1916.1.25.1.33.1.3Unsigned32read-onlycurrent
extremeWirelessClientDiagErrorsInDetected
OBJECT-TYPE
This is the total number of errors this client has experienced since the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.33.1.4Unsigned32read-onlycurrent
extremeWirelessClientDiagAuthReqInDetected
OBJECT-TYPE
This is the total number of AUTH REQ packets received from this client while it was in the detected state.
1.3.6.1.4.1.1916.1.25.1.33.1.5Unsigned32read-onlycurrent
extremeWirelessClientDiagOtherReqInDetected
OBJECT-TYPE
This is the total number of REQ packets received from this client while it was in detected state that were not AUTH REQ packets.
1.3.6.1.4.1.1916.1.25.1.33.1.6Unsigned32read-onlycurrent
extremeWirelessClientDiagMgmtActionInDetected
OBJECT-TYPE
This is the total number of times management initiated action (i.e. force-disassociate) was received for this client in the detected state.
1.3.6.1.4.1.1916.1.25.1.33.1.7Unsigned32read-onlycurrent
extremeWirelessClientDiagTimeOutInDetected
OBJECT-TYPE
This is the total number of timeouts which happened to this client in the detected state.
1.3.6.1.4.1.1916.1.25.1.33.1.8Unsigned32read-onlycurrent
extremeWirelessClientDiagEntersInAuth
OBJECT-TYPE
This is the total number of times the client has entered the AUTHED state.
1.3.6.1.4.1.1916.1.25.1.33.1.9Unsigned32read-onlycurrent
extremeWirelessClientDiagErrorsInAuth
OBJECT-TYPE
This is the total number of times the client has had errors in the AUTHED state.
1.3.6.1.4.1.1916.1.25.1.33.1.10Unsigned32read-onlycurrent
extremeWirelessClientDiagAssocReqInAuth
OBJECT-TYPE
This is the total number of ASSOC REQ or REASSOC REQ packets received from this client while in the AUTHED state.
1.3.6.1.4.1.1916.1.25.1.33.1.11Unsigned32read-onlycurrent
extremeWirelessClientDiagOtherReqInAuth
OBJECT-TYPE
This is the total number of non-ASSOC/REASSOC packets received from this client while in the AUTHED state.
1.3.6.1.4.1.1916.1.25.1.33.1.12Unsigned32read-onlycurrent
extremeWirelessClientDiagMgmtActionInAuth
OBJECT-TYPE
This is the total number of management initiated action which this client experienced while in the AUTHED state.
1.3.6.1.4.1.1916.1.25.1.33.1.13Unsigned32read-onlycurrent
extremeWirelessClientDiagTimeOutInAuth
OBJECT-TYPE
This is the total number of times this client timed out while in the authed state.
1.3.6.1.4.1.1916.1.25.1.33.1.14Unsigned32read-onlycurrent
extremeWirelessClientDiagEntersInAssoc
OBJECT-TYPE
This is the total number of times this client has entered the associated state.
1.3.6.1.4.1.1916.1.25.1.33.1.15Unsigned32read-onlycurrent
extremeWirelessClientDiagErrorsInAssoc
OBJECT-TYPE
This is the total number of errors this client has had in the associated state.
1.3.6.1.4.1.1916.1.25.1.33.1.16Unsigned32read-onlycurrent
extremeWirelessClientDiagMgmtActionInAssoc
OBJECT-TYPE
This is the total number of management actions which have happened to this client in the associated state.
1.3.6.1.4.1.1916.1.25.1.33.1.17Unsigned32read-onlycurrent
extremeWirelessClientDiagTimeOutInAssoc
OBJECT-TYPE
This is the total number of times this station has been timed-out in the associated state.
1.3.6.1.4.1.1916.1.25.1.33.1.18Unsigned32read-onlycurrent
extremeWirelessClientDiagEntersInForward
OBJECT-TYPE
This is the total number of times this client has entered the forwarding state.
1.3.6.1.4.1.1916.1.25.1.33.1.19Unsigned32read-onlycurrent
extremeWirelessClientDiagMgmtActionInForward
OBJECT-TYPE
This is the total number of times this client has experience a management action while in forwarding.
1.3.6.1.4.1.1916.1.25.1.33.1.20Unsigned32read-onlycurrent
extremeWirelessClientDiagTimeOutInForward
OBJECT-TYPE
This is the total number of timeouts this client has experienced while in forwarding.
1.3.6.1.4.1.1916.1.25.1.33.1.21Unsigned32read-onlycurrent
extremeWirelessClientDiagTotal802Auths
OBJECT-TYPE
This is the total number of times this client has tried to authenticate using 802.1x.
1.3.6.1.4.1.1916.1.25.1.33.1.22Unsigned32read-onlycurrent
extremeWirelessClientDiagTotalNetLoginAuths
OBJECT-TYPE
This is the total number of times this client has tried to authenticate using NetLogin.
1.3.6.1.4.1.1916.1.25.1.33.1.23Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoTable
OBJECT-TYPE
This table contains one row per client on a wireless interface. It gives information about the association history and parameters of that client.
1.3.6.1.4.1.1916.1.25.1.34not-accessiblecurrent
extremeWirelessClientAssocInfoEntry
OBJECT-TYPE
Note that ifIndex here is virtual ifIndex (SSID).
1.3.6.1.4.1.1916.1.25.1.34.1not-accessiblecurrent
extremeWirelessClientAssocInfoAssociated
OBJECT-TYPE
This gives the current MAC-layer association status of this client.
1.3.6.1.4.1.1916.1.25.1.34.1.1TruthValueread-onlycurrent
extremeWirelessClientAssocInfoTotalAssocReq
OBJECT-TYPE
This gives the total number of ASSOC REQ pdus recieved from this client since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.34.1.2Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoTotalReAssocReq
OBJECT-TYPE
This gives the total number of REASSOC REQ PDUs received from this client since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.34.1.3Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoTotalAssocResp
OBJECT-TYPE
This gives the total number of ASSOC RESP pdus sent to this client since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.34.1.4Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoTotalAssocOK
OBJECT-TYPE
This gives the total number of ASSOC RESP PDUs which carried a status = ok response.
1.3.6.1.4.1.1916.1.25.1.34.1.5Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoTotalAssocFail
OBJECT-TYPE
This gives the total number of ASSOC RESP PDUs which carried a status = failed response.
1.3.6.1.4.1.1916.1.25.1.34.1.6Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoTotalDisassocReq
OBJECT-TYPE
This gives the total number of ASSOC RESP PDUs which carried a status = failed response.
1.3.6.1.4.1.1916.1.25.1.34.1.7Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoTotalDisassocResp
OBJECT-TYPE
This gives the total number of ASSOC RESP PDUs which carried a status = failed response.
1.3.6.1.4.1.1916.1.25.1.34.1.8Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoRateIE
OBJECT-TYPE
This is the value of the rate IE carried in the last ASSOC REQ packet if this wireless interface is configured to keep IEs. If it's not, this will be NULL. The IE is encoded as a series of bytes exactly as the value portion of the IE in the PDU.
1.3.6.1.4.1.1916.1.25.1.34.1.9OCTET STRINGread-onlycurrent
extremeWirelessClientAssocInfoLastAssoc
OBJECT-TYPE
This is sysUpTime when the last ASSOC REQ was received from this client.
1.3.6.1.4.1.1916.1.25.1.34.1.10TimeTicksread-onlycurrent
extremeWirelessClientAssocInfoLastError
OBJECT-TYPE
This is sysUpTime when the last ASSOC RESP was sent to this client with a failure status.
1.3.6.1.4.1.1916.1.25.1.34.1.11TimeTicksread-onlycurrent
extremeWirelessClientAssocInfoLastErrorType
OBJECT-TYPE
This is an enumerated type which indicates which was the last error this client experienced during association.
1.3.6.1.4.1.1916.1.25.1.34.1.12INTEGER {noError(0), rateMismatch(1), badState(2), badCapability(3), couterMeasure(4), mcastCipher(5), maxAssoc(6), rsnRequired(7), rsnMismatch(8), otherError(9)}read-onlycurrent
extremeWirelessClientAssocInfoErrorRateMismatch
OBJECT-TYPE
This is the total number of failed associations due to a mismatch of the rate IEs.
1.3.6.1.4.1.1916.1.25.1.34.1.13Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoErrorBadState
OBJECT-TYPE
This is the total number of failed associations due to the client being in the wrong state.
1.3.6.1.4.1.1916.1.25.1.34.1.14Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoErrorBadCapability
OBJECT-TYPE
This is the total number of failed associations due to the client having a capability mismatch with the AP.
1.3.6.1.4.1.1916.1.25.1.34.1.15Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoErrorCounterMeasure
OBJECT-TYPE
This is the total number of failed associations due to the client being subject to a counter measure.
1.3.6.1.4.1.1916.1.25.1.34.1.16Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoErrorMcastCipher
OBJECT-TYPE
This is the total number of failed associations due to the client not supporting the current multicast cipher.
1.3.6.1.4.1.1916.1.25.1.34.1.17Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoErrorMaxAssoc
OBJECT-TYPE
This is the total number of failed associations due to the AP having too many associations already.
1.3.6.1.4.1.1916.1.25.1.34.1.18Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoErrorRSNRequired
OBJECT-TYPE
This is the total number of failed associations due to the client not supplying the (required) RSN IE.
1.3.6.1.4.1.1916.1.25.1.34.1.19Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoErrorRSNMismatch
OBJECT-TYPE
This is the total number of failed associations due to the client's RSN IE not matching supported features on the AP.
1.3.6.1.4.1.1916.1.25.1.34.1.20Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoErrorOther
OBJECT-TYPE
This is the total number of failed associations due to the client's RSN IE not matching supported features on the AP.
1.3.6.1.4.1.1916.1.25.1.34.1.21Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoWPAIEPresent
OBJECT-TYPE
If this value is true it indicates that WPA information was gathered from this station in the last association request. If true, it implies the values of the WPA variables below are valid. If false, it indicates that this station did not send a WPA IE in its last association.
1.3.6.1.4.1.1916.1.25.1.34.1.22TruthValueread-onlycurrent
extremeWirelessClientAssocInfoWPAVersion
OBJECT-TYPE
This value gives the version of WPA supported by this station. See IEEE 802.11i Draft 3.0 section 7 for meaning of various values.
1.3.6.1.4.1.1916.1.25.1.34.1.23Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoWPAIEMcastCipher
OBJECT-TYPE
This value gives the single multicast cipher supported by this client.
1.3.6.1.4.1.1916.1.25.1.34.1.24WPACipherSetread-onlycurrent
extremeWirelessClientAssocInfoWPAUcastCipherCount
OBJECT-TYPE
This gives the number of set bits in the ucast cipher variable below. In this case this number should always be 1.
1.3.6.1.4.1.1916.1.25.1.34.1.25Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoWPAUcastCipher
OBJECT-TYPE
This gives the cipher suites which was requested by this client during its last assoc req.
1.3.6.1.4.1.1916.1.25.1.34.1.26WPACipherSetread-onlycurrent
extremeWirelessClientAssocInfoWPAKeyMgmtCount
OBJECT-TYPE
This value gives the number of key management suites requested by this client in the last assoc. req message. It indicates the number of set bits in the mgmt suite variable below.
1.3.6.1.4.1.1916.1.25.1.34.1.27Unsigned32read-onlycurrent
extremeWirelessClientAssocInfoWPAKeyMgmtSuite
OBJECT-TYPE
Gives the key management suite requested by this client during its last association request.
1.3.6.1.4.1.1916.1.25.1.34.1.28WPAKeyMgmtSetread-onlycurrent
extremeWirelessClientAssocIEBlob
OBJECT-TYPE
This is the IE list sent in the association frame encoded as a series of TLVs.
1.3.6.1.4.1.1916.1.25.1.34.1.29OCTET STRINGread-onlycurrent
extremeWirelessClientAuthInfoTable
OBJECT-TYPE
This table contains one row per client on a wireless interface. It gives information about the authentication history and params of that client.
1.3.6.1.4.1.1916.1.25.1.35not-accessiblecurrent
extremeWirelessClientAuthInfoEntry
OBJECT-TYPE
Note that ifIndex here is virtual ifIndex (SSID).
1.3.6.1.4.1.1916.1.25.1.35.1not-accessiblecurrent
extremeWirelessClientAuthInfoCurrentAuth
OBJECT-TYPE
This gives the current MAC-layer authentication status of the client.
1.3.6.1.4.1.1916.1.25.1.35.1.1TruthValueread-onlycurrent
extremeWirelessClientAuthInfoTotalAuths
OBJECT-TYPE
This is the total number of AUTH REQ packets received from this client since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.35.1.2Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoTotalAuthResp
OBJECT-TYPE
This is the total number of AUTH RESP packets sent to this client since the last time the counters were cleared.
1.3.6.1.4.1.1916.1.25.1.35.1.3Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoTotalAuthsOK
OBJECT-TYPE
This is the total number of AUTH RESP packets sent to this client which carried a STATUS = OK message.
1.3.6.1.4.1.1916.1.25.1.35.1.4Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoTotalAuthsFailed
OBJECT-TYPE
This is the total number of AUTH RESP packets sent to this client which carried a STATUS = Failed message.
1.3.6.1.4.1.1916.1.25.1.35.1.5Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoTotalDeauthReq
OBJECT-TYPE
This is the total number of DEAUTH REQ packets sent from this client.
1.3.6.1.4.1.1916.1.25.1.35.1.6Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoTotalDeauthResp
OBJECT-TYPE
This is the total number of DEAUTH RESP packets sent to this client.
1.3.6.1.4.1.1916.1.25.1.35.1.7Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoTotalOpen
OBJECT-TYPE
This is the total number of AUTH REQ packets which requested open authentication from the AP.
1.3.6.1.4.1.1916.1.25.1.35.1.8Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoTotalShared
OBJECT-TYPE
This is the total number of AUTH REQ packets which requested shared authentication from the AP.
1.3.6.1.4.1.1916.1.25.1.35.1.9Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoLastAuth
OBJECT-TYPE
This is the sysUpTime the last time this client sent a request for authentication.
1.3.6.1.4.1.1916.1.25.1.35.1.10TimeTicksread-onlycurrent
extremeWirelessClientAuthInfoLastAuthType
OBJECT-TYPE
This is the last type of authentication requested by this client.
1.3.6.1.4.1.1916.1.25.1.35.1.11INTEGER {open(1), shared(2)}read-onlycurrent
extremeWirelessClientAuthInfoLastError
OBJECT-TYPE
This is the sysUpTime of the last authentication failure for this client.
1.3.6.1.4.1.1916.1.25.1.35.1.12TimeTicksread-onlycurrent
extremeWirelessClientAuthInfoLastErrorType
OBJECT-TYPE
This is the OID of the last error counter that was incremented for this client.
1.3.6.1.4.1.1916.1.25.1.35.1.13INTEGER {noError(0), resourceFailure(1), sequenceNumber(2), challengeText(3), algorithmMismatch(4), keyIndex(5), otherError(6)}read-onlycurrent
extremeWirelessClientAuthInfoErrorResourceFailure
OBJECT-TYPE
This is the total number of authentication failures which have resulted from resource failures.
1.3.6.1.4.1.1916.1.25.1.35.1.14Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoErrorSequenceNum
OBJECT-TYPE
This is the total number of authentication failures which have resulted from bad packet sequence numbers.
1.3.6.1.4.1.1916.1.25.1.35.1.15Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoErrorChallengeText
OBJECT-TYPE
This is the total number of authentication failures which have resutled from challenge text mismatch.
1.3.6.1.4.1.1916.1.25.1.35.1.16Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoErrorTypeMismatch
OBJECT-TYPE
This is the total number of authentication failures which have resutled from the requested authentication type (i.e. open/shared) not matching what this virutal interface is configured for.
1.3.6.1.4.1.1916.1.25.1.35.1.17Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoErrorKeyIndex
OBJECT-TYPE
This is the total number of authentication failures which have resulted from key index mismatches.
1.3.6.1.4.1.1916.1.25.1.35.1.18Unsigned32read-onlycurrent
extremeWirelessClientAuthInfoErrorOther
OBJECT-TYPE
This is the total number of authentication failures which have resulted from unspecified errors.
1.3.6.1.4.1.1916.1.25.1.35.1.19Unsigned32read-onlycurrent
extremeWirelessClientMACInfoTable
OBJECT-TYPE
This table contains one entry per source MAC which has tried to authenticate with this virtual interface (SSID). Entries are created when AUTH or REATH REQ packets are received from new clients. Entries can be aged out, removed by management action, or overwritten by an overflow.
1.3.6.1.4.1.1916.1.25.1.36not-accessiblecurrent
extremeWirelessClientMACInfoEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.36.1not-accessiblecurrent
extremeWirelessClientMACInfoMinRSS
OBJECT-TYPE
This gives the minimum RSS indication of any packet we have seen from this client. A value of 0 indicates that RSSI has been unavailable.
1.3.6.1.4.1.1916.1.25.1.36.1.1INTEGERread-onlycurrent
extremeWirelessClientMACInfoMaxRSS
OBJECT-TYPE
This gives the maximum RSS indication of any packet we have seen from this client. A value of 0 indicates that RSSI has been unavailable.
1.3.6.1.4.1.1916.1.25.1.36.1.2INTEGERread-onlycurrent
extremeWirelessClientMACInfoAvgRSS
OBJECT-TYPE
This gives the average RSS indication of any packet we have seen from this client. A value of 0 indicates that RSSI has been unavailable.
1.3.6.1.4.1.1916.1.25.1.36.1.3INTEGERread-onlycurrent
extremeWirelessClientMACInfoTotalProbeReq
OBJECT-TYPE
This gives the total number of PROBE REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.4Unsigned32read-onlycurrent
extremeWirelessClientMACInfoTotalAuthReq
OBJECT-TYPE
This gives the total number of AUTH REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.5Unsigned32read-onlycurrent
extremeWirelessClientMACInfoTotalAssocReq
OBJECT-TYPE
This gives the total number of ASSOC REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.6Unsigned32read-onlycurrent
extremeWirelessClientMACInfoTotalReAssocReq
OBJECT-TYPE
This gives the total number of REASSOC REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.7Unsigned32read-onlycurrent
extremeWirelessClientMACInfoTotalDeAssocReq
OBJECT-TYPE
This gives the total number of DEASSOC REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.8Unsigned32read-onlycurrent
extremeWirelessClientMACInfoTotalDeAuthReq
OBJECT-TYPE
This gives the total number of DEAUTH REQ packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.9Unsigned32read-onlycurrent
extremeWirelessClientMACInfoTotalPsPoll
OBJECT-TYPE
This gives the total number of PS POLL packets recieved from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.10Unsigned32read-onlycurrent
extremeWirelessClientMACInfoTotalData
OBJECT-TYPE
This gives the total number of data frames received from this client since the counters have been cleared.
1.3.6.1.4.1.1916.1.25.1.36.1.11Unsigned32read-onlycurrent
extremeWirelessClientMACInfoNavValue
OBJECT-TYPE
TODO: Is this an average, total, what?
1.3.6.1.4.1.1916.1.25.1.36.1.12Unsigned32read-onlycurrent
extremeWirelessClientSizeCounterTable
OBJECT-TYPE
There is one entry in this table for each client which has tried to authenticate with this virtual interface. A new entry is created when an AUTH or REATH REQ packet is received from a new station. Entries are removed by management action, timeout or overwritten due to overflow. Entries in this table are also indexed by virtual interface. A client which has tried to authenticate to multiple virtual interfaces may have more than one entry in this table.
1.3.6.1.4.1.1916.1.25.1.37not-accessiblecurrent
extremeWirelessClientSizeCounterEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.37.1not-accessiblecurrent
extremeWirelessClientFrameSizeReXmit64
OBJECT-TYPE
This gives the number of frags retransmitted to this client which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.1Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeReXmit128
OBJECT-TYPE
This gives the number of frags retransmitted to this client which were between 64 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.2Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeReXmit256
OBJECT-TYPE
This gives the number of frags retransmitted to this client which were between 128 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.3Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeReXmit512
OBJECT-TYPE
This gives the number of frags retransmitted to this client which were between 256 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.4Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeReXmit1024
OBJECT-TYPE
This gives the number of frags retransmitted to this client which were between 512 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.5Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeReXmit2048
OBJECT-TYPE
This gives the number of frags retransmitted to this client which were between 1024 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.6Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeTX64
OBJECT-TYPE
This gives the number of frags transmitted to this client which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.7Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeTX128
OBJECT-TYPE
This gives the number of frags transmitted to this client which were between 64 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.8Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeTX256
OBJECT-TYPE
This gives the number of frags transmitted to this client which were between 128 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.9Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeTX512
OBJECT-TYPE
This gives the number of frags transmitted to this client which were between 256 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.10Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeTX1024
OBJECT-TYPE
This gives the number of frags transmitted to this client which were between 512 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.11Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeTX2048
OBJECT-TYPE
This gives the number of frags transmitted to this client which were between 1024 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.12Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeRX64
OBJECT-TYPE
This gives the number of frags received from this client which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.13Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeRX128
OBJECT-TYPE
This gives the number of frags received from this client which were between 64 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.14Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeRX256
OBJECT-TYPE
This gives the number of frags received from this client which were between 128 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.15Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeRX512
OBJECT-TYPE
This gives the number of frags received from this client which were between 256 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.16Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeRX1024
OBJECT-TYPE
This gives the number of frags received from this client which were between 512 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.17Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeRX2048
OBJECT-TYPE
This gives the number of frags received from this client which were between 1024 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.18Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorTX64
OBJECT-TYPE
This gives the number of frags which failed to be sent from this client with a length between 0 and 64 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.19Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorTX128
OBJECT-TYPE
This gives the number of frags which failed to be sent from this client with a length between 65 and 128 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.20Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorTX256
OBJECT-TYPE
This gives the number of frags which failed to be sent from this client with a length between 129 and 256 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.21Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorTX512
OBJECT-TYPE
This gives the number of frags which failed to be sent from this client with a length between 257 and 512 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.22Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorTX1024
OBJECT-TYPE
This gives the number of frags which failed to be sent from this client with a length between 513 and 1024 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.23Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorTX2048
OBJECT-TYPE
This gives the number of frags which failed to be sent from this client with a length between 1025 and 2048 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.24Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorRX64
OBJECT-TYPE
This gives the number of frags which were received with an FCS or other error and a length between 0 and 64 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.25Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorRX128
OBJECT-TYPE
This gives the number of frags which were received with an FCS or other error and a length between 65 and 128 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.26Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorRX256
OBJECT-TYPE
This gives the number of frags which were received with an FCS or other error and a length between 129 and 256 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.27Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorRX512
OBJECT-TYPE
This gives the number of frags which were received with an FCS or other error and a length between 257 and 512 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.28Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorRX1024
OBJECT-TYPE
This gives the number of frags which were received with an FCS or other error and a length between 513 and 1024 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.29Unsigned32read-onlycurrent
extremeWirelessClientFrameSizeErrorRX2048
OBJECT-TYPE
This gives the number of frags which were received with an FCS or other error and a length between 1025 and 2048 bytes.
1.3.6.1.4.1.1916.1.25.1.37.1.30Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeTX64
OBJECT-TYPE
This gives the number of packets transmitted to this client which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.31Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeTX128
OBJECT-TYPE
This gives the number of packets transmitted to this client which were between 64 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.32Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeTX256
OBJECT-TYPE
This gives the number of packets transmitted to this client which were between 128 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.33Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeTX512
OBJECT-TYPE
This gives the number of packets transmitted to this client which were between 256 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.34Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeTX1024
OBJECT-TYPE
This gives the number of packets transmitted to this client which were between 512 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.35Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeTX2048
OBJECT-TYPE
This gives the number of packets transmitted to this client which were between 1024 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.36Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeRX64
OBJECT-TYPE
This gives the number of packets received from this client which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.37Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeRX128
OBJECT-TYPE
This gives the number of packets received from this client which were between 64 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.38Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeRX256
OBJECT-TYPE
This gives the number of packets received from this client which were between 128 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.39Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeRX512
OBJECT-TYPE
This gives the number of packets received from this client which were between 256 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.40Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeRX1024
OBJECT-TYPE
This gives the number of packets received from this client which were between 512 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.41Unsigned32read-onlycurrent
extremeWirelessClientPacketSizeRX2048
OBJECT-TYPE
This gives the number of packets received from this client which were between 1024 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.37.1.42Unsigned32read-onlycurrent
extremeWirelessClientSpeedCounterTable
OBJECT-TYPE
This table is indexed by wireless interface index. These are the virtual interfaces corresponding to the SSID. Support for this table is optional, indicated by the value of the variable extremeWirelessClientDiagSupportsSpeedCounters in the status table.
1.3.6.1.4.1.1916.1.25.1.38not-accessiblecurrent
extremeWirelessClientSpeedCounterEntry
OBJECT-TYPE
The ifIndex here is the wireless interface (SSID). It is expected that an entry will be created in this table only after a client sends a AUTH or REATH packet to the SSID.
1.3.6.1.4.1.1916.1.25.1.38.1not-accessiblecurrent
extremeWirelessClientSpeedReXmit1
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 1 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.1Unsigned32read-onlycurrent
extremeWirelessClientSpeedReXmit2
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 2 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.2Unsigned32read-onlycurrent
extremeWirelessClientSpeedReXmit5p5
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 5 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.3Unsigned32read-onlycurrent
extremeWirelessClientSpeedReXmit6
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 6 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.4Unsigned32read-onlycurrent
extremeWirelessClientSpeedReXmit9
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 9 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.5Unsigned32read-onlycurrent
extremeWirelessClientSpeedReXmit12
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 12 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.6Unsigned32read-onlycurrent
extremeWirelessClientSpeedReXmit18
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 18 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.7Unsigned32read-onlycurrent
extremeWirelessClientSpeedReXmit24
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 24 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.8Unsigned32read-onlycurrent
extremeWirelessClientSpeedReXmit36
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 36 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.9Unsigned32read-onlycurrent
extremeWirelessClientSpeedReXmit48
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 48 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.10Unsigned32read-onlycurrent
extremeWirelessClientSpeedReXmit54
OBJECT-TYPE
This gives the number of frags which were retransmitted to the given client at 54 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.11Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX1
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 1 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.12Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX2
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 2 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.13Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX5p5
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 5 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.14Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX6
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 6 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.15Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX9
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 9 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.16Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX12
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 12 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.17Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX18
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 18 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.18Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX24
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 24 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.19Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX36
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 36 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.20Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX48
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 48 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.21Unsigned32read-onlycurrent
extremeWirelessClientSpeedTX54
OBJECT-TYPE
This gives the number of frags which were transmitted to the given client at 54 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.22Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX1
OBJECT-TYPE
This gives the number of frags which were received from the given client at 1 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.23Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX2
OBJECT-TYPE
This gives the number of frags which were received from the given client at 2 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.24Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX5p5
OBJECT-TYPE
This gives the number of frags which were received from the given client at 5 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.25Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX6
OBJECT-TYPE
This gives the number of frags which were received from the given client at 6 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.26Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX9
OBJECT-TYPE
This gives the number of frags which were received from the given client at 9 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.27Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX12
OBJECT-TYPE
This gives the number of frags which were received from the given client at 12 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.28Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX18
OBJECT-TYPE
This gives the number of frags which were received from the given client at 18 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.29Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX24
OBJECT-TYPE
This gives the number of frags which were received from the given client at 24 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.30Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX36
OBJECT-TYPE
This gives the number of frags which were received from the given client at 36 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.31Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX48
OBJECT-TYPE
This gives the number of frags which were received from the given client at 48 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.32Unsigned32read-onlycurrent
extremeWirelessClientSpeedRX54
OBJECT-TYPE
This gives the number of frags which were received from the given client at 54 Mbps.
1.3.6.1.4.1.1916.1.25.1.38.1.33Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeTable
OBJECT-TYPE
There is one entry in this table for each virtual and physical interface. Values for physical interfaces are summations of the values for the constituent virtual interfaces.
1.3.6.1.4.1.1916.1.25.1.39not-accessiblecurrent
extremeWirelessIntfFrameSizeEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.39.1not-accessiblecurrent
extremeWirelessIntfFrameSizeMgmtTX64
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.1Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtTX128
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.2Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtTX256
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.3Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtTX512
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.4Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtTX1024
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.5Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtTX2048
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.6Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtRX64
OBJECT-TYPE
This gives the number of management-type frames received on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.7Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtRX128
OBJECT-TYPE
This gives the number of management-type frames received on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.8Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtRX256
OBJECT-TYPE
This gives the number of management-type frames received on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.9Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtRX512
OBJECT-TYPE
This gives the number of management-type frames received on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.10Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtRX1024
OBJECT-TYPE
This gives the number of management-type frames received on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.11Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeMgmtRX2048
OBJECT-TYPE
This gives the number of management-type frames received on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.12Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlTX64
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.13Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlTX128
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.14Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlTX256
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.15Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlTX512
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.16Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlTX1024
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.17Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlTX2048
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.18Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlRX64
OBJECT-TYPE
This gives the number of control-type frames received on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.19Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlRX128
OBJECT-TYPE
This gives the number of control-type frames received on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.20Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlRX256
OBJECT-TYPE
This gives the number of control-type frames received on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.21Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlRX512
OBJECT-TYPE
This gives the number of control-type frames received on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.22Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlRX1024
OBJECT-TYPE
This gives the number of control-type frames received on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.23Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeCtlRX2048
OBJECT-TYPE
This gives the number of control-type frames received on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.24Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataTX64
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.25Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataTX128
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.26Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataTX256
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.27Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataTX512
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.28Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataTX1024
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.29Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataTX2048
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.30Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataRX64
OBJECT-TYPE
This gives the number of data-type frames received on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.31Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataRX128
OBJECT-TYPE
This gives the number of data-type frames received on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.32Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataRX256
OBJECT-TYPE
This gives the number of data-type frames received on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.33Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataRX512
OBJECT-TYPE
This gives the number of data-type frames received on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.34Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataRX1024
OBJECT-TYPE
This gives the number of data-type frames received on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.35Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeDataRX2048
OBJECT-TYPE
This gives the number of data-type frames received on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.39.1.36Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorTable
OBJECT-TYPE
There is one entry in this table for each virtual and physical interface. Values for physical interfaces are summations of the values for the constituent virtual interfaces.
1.3.6.1.4.1.1916.1.25.1.40not-accessiblecurrent
extremeWirelessIntfFrameSizeErrorEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.40.1not-accessiblecurrent
extremeWirelessIntfFrameSizeReXmit64
OBJECT-TYPE
This gives the number of frames retransmitted on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.1Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeReXmit128
OBJECT-TYPE
This gives the number of frames retransmitted on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.2Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeReXmit256
OBJECT-TYPE
This gives the number of frames retransmitted on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.3Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeReXmit512
OBJECT-TYPE
This gives the number of frames retransmitted on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.4Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeReXmit1024
OBJECT-TYPE
This gives the number of frames retransmitted on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.5Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeReXmit2048
OBJECT-TYPE
This gives the number of frames retransmitted on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.6Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorTX64
OBJECT-TYPE
This gives the number of frames which failed to be transmitted interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.7Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorTX128
OBJECT-TYPE
This gives the number of frames which failed to be transmitted interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.8Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorTX256
OBJECT-TYPE
This gives the number of frames which failed to be transmitted interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.9Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorTX512
OBJECT-TYPE
This gives the number of frames which failed to be transmitted interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.10Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorTX1024
OBJECT-TYPE
This gives the number of frames which failed to be transmitted interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.11Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorTX2048
OBJECT-TYPE
This gives the number of frames which failed to be transmitted interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.12Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorRX64
OBJECT-TYPE
This gives the number of frames which had errors on receive on this interface which were less than or equal to 64 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.13Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorRX128
OBJECT-TYPE
This gives the number of frames which had errors on receive on this interface which were between 65 and 128 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.14Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorRX256
OBJECT-TYPE
This gives the number of frames which had errors on receive on this interface which were between 129 and 256 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.15Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorRX512
OBJECT-TYPE
This gives the number of frames which had errors on receive on this interface which were between 257 and 512 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.16Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorRX1024
OBJECT-TYPE
This gives the number of frames which had errors on receive on this interface which were between 513 and 1024 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.17Unsigned32read-onlycurrent
extremeWirelessIntfFrameSizeErrorRX2048
OBJECT-TYPE
This gives the number of frames which had errors on receive on this interface which were between 1025 and 2048 bytes in length.
1.3.6.1.4.1.1916.1.25.1.40.1.18Unsigned32read-onlycurrent
extremeWirelessIntfFrameSpeedTable
OBJECT-TYPE
There is one entry in this table for each virtual and physical interface. Values for physical interfaces are summations of the values for the constituent virtual interfaces.
1.3.6.1.4.1.1916.1.25.1.41not-accessiblecurrent
extremeWirelessIntfFrameSpeedEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.41.1not-accessiblecurrent
extremeWirelessIntfSpeedMgmtTX1
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.1Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX2
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.2Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX5p5
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.3Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX6
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.4Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX9
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.5Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX11
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.6Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX12
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.7Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX18
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.8Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX24
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.9Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX36
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.10Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX48
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.11Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtTX54
OBJECT-TYPE
This gives the number of management-type frames transmitted on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.12Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX1
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.13Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX2
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.14Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX5p5
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.15Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX6
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.16Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX9
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.17Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX11
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.18Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX12
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.19Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX18
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.20Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX24
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.21Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX36
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.22Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX48
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.23Unsigned32read-onlycurrent
extremeWirelessIntfSpeedMgmtRX54
OBJECT-TYPE
This gives the number of management-type frames recieved on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.24Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX1
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.25Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX2
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.26Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX5p5
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.27Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX6
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.28Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX9
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.29Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX11
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.30Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX12
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.31Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX18
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.32Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX24
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.33Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX36
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.34Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX48
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.35Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlTX54
OBJECT-TYPE
This gives the number of control-type frames transmitted on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.36Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX1
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.37Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX2
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.38Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX5p5
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.39Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX6
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.40Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX9
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.41Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX11
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.42Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX12
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.43Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX18
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.44Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX24
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.45Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX36
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.46Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX48
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.47Unsigned32read-onlycurrent
extremeWirelessIntfSpeedCtlRX54
OBJECT-TYPE
This gives the number of control-type frames recieved on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.48Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX1
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.49Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX2
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.50Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX5p5
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.51Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX6
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.52Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX9
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.53Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX11
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.54Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX12
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.55Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX18
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.56Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX24
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.57Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX36
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.58Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX48
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.59Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataTX54
OBJECT-TYPE
This gives the number of data-type frames transmitted on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.60Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX1
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.61Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX2
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.62Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX5p5
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.63Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX6
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.64Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX9
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.65Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX11
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.66Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX12
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.67Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX18
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.68Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX24
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.69Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX36
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.70Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX48
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.71Unsigned32read-onlycurrent
extremeWirelessIntfSpeedDataRX54
OBJECT-TYPE
This gives the number of data-type frames recieved on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.41.1.72Unsigned32read-onlycurrent
extremeWirelessIntfFrameSpeedErrorTable
OBJECT-TYPE
There is one entry in this table for each virtual and physical interface. Values for physical interfaces are summations of the values for the constituent virtual interfaces.
1.3.6.1.4.1.1916.1.25.1.42not-accessiblecurrent
extremeWirelessIntfFrameSpeedErrorEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.42.1not-accessiblecurrent
extremeWirelessIntfSpeedReXmit1
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 1 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.1Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit2
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 2 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.2Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit5p5
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 5 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.3Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit6
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 6 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.4Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit9
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 9 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.5Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit11
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 11 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.6Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit12
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 12 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.7Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit18
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 18 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.8Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit24
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 24 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.9Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit36
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 36 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.10Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit48
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 48 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.11Unsigned32read-onlycurrent
extremeWirelessIntfSpeedReXmit54
OBJECT-TYPE
This gives the number of frames which were retransmitted on this interface at 54 Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.12Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX1
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.13Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX2
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.14Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX5p5
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.15Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX6
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.16Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX9
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.17Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX11
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.18Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX12
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.19Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX18
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.20Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX24
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.21Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX36
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.22Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX48
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.23Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorTX54
OBJECT-TYPE
This gives the number of frames which were transmited with errors on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.24Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX1
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 1Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.25Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX2
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 2Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.26Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX5p5
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 5.5Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.27Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX6
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 6Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.28Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX9
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 9Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.29Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX11
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 11Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.30Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX12
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 12Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.31Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX18
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 18Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.32Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX24
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 24Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.33Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX36
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 36Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.34Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX48
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 48Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.35Unsigned32read-onlycurrent
extremeWirelessIntfSpeedErrorRX54
OBJECT-TYPE
This gives the number of frames which were received with errors on this interface at 54Mbps.
1.3.6.1.4.1.1916.1.25.1.42.1.36Unsigned32read-onlycurrent
extremeWirelessIntfUtilizationTable
OBJECT-TYPE
There is one entry in this table for each virtual and physical interface. Values for physical interfaces are summations of the values for the constituent virtual interfaces.
1.3.6.1.4.1.1916.1.25.1.43not-accessiblecurrent
extremeWirelessIntfUtilizationEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.43.1not-accessiblecurrent
extremeWirelessIntfUtilizationNav
OBJECT-TYPE
This gives the instantaneous NAV value on this interface, or some increasing-metric of utilization.
1.3.6.1.4.1.1916.1.25.1.43.1.1Unsigned32read-onlycurrent
extremeWirelessIntfUtilizationNoiseFloor
OBJECT-TYPE
This gives the noise floor in dBm for this interface.
1.3.6.1.4.1.1916.1.25.1.43.1.2Unsigned32read-onlycurrent
extremeWirelessCounterMeasureSource
OBJECT-TYPE
This value is used in the counter measure traps to indicate the reason that counter measures have been invoked.
1.3.6.1.4.1.1916.1.25.1.44INTEGER {clientReport(1), micFailure(2)}accessible-for-notifycurrent
extremeWirelessClientWPAStatsTable
OBJECT-TYPE
This table contains information of the WPA state transitions on a per-client basis. Rows are indexed first by virtual interface, then by client MAC.
1.3.6.1.4.1.1916.1.25.1.47not-accessiblecurrent
extremeWirelessClientWPAStatsEntry
OBJECT-TYPE
Note that ifIndex here is virtual ifIndex (SSID).
1.3.6.1.4.1.1916.1.25.1.47.1not-accessiblecurrent
extremeWirelessClientWPAStatsStarts
OBJECT-TYPE
Number of starts of the WPA key exchange process
1.3.6.1.4.1.1916.1.25.1.47.1.1Counter32read-onlycurrent
extremeWirelessClientWPAStatsPairwiseKeySuccesses
OBJECT-TYPE
Number of successes in the pairwise key handshake
1.3.6.1.4.1.1916.1.25.1.47.1.2Counter32read-onlycurrent
extremeWirelessClientWPAStatsPairwiseKeyFailures
OBJECT-TYPE
Number of failures the pairwise key handshake
1.3.6.1.4.1.1916.1.25.1.47.1.3Counter32read-onlycurrent
extremeWirelessClientWPAStatsGroupKeySuccesses
OBJECT-TYPE
Number of successes of the group key exchange
1.3.6.1.4.1.1916.1.25.1.47.1.4Counter32read-onlycurrent
extremeWirelessClientWPAStatsGroupKeyFailures
OBJECT-TYPE
Number of failures of the group key handshake
1.3.6.1.4.1.1916.1.25.1.47.1.5Counter32read-onlycurrent
extremeWirelessClientWPAStatsPairwiseKey1Sends
OBJECT-TYPE
Number of times the first packet of the pairwise key exchange was sent.
1.3.6.1.4.1.1916.1.25.1.47.1.6Counter32read-onlycurrent
extremeWirelessClientWPAStatsPairwiseKey3Sends
OBJECT-TYPE
Number of times the third packet of the pairwise key exchange was sent.
1.3.6.1.4.1.1916.1.25.1.47.1.7Counter32read-onlycurrent
extremeWirelessClientWPAStatsGroupKeySends
OBJECT-TYPE
Number of times the group key packet was sent.
1.3.6.1.4.1.1916.1.25.1.47.1.8Counter32read-onlycurrent
extremeWirelessClientWPAStatsEAPOLKeyReceivedInPairwise1Key
OBJECT-TYPE
Number of times an EAPOL Key packet was recieved after sending the 1st pairwise key exchange packet
1.3.6.1.4.1.1916.1.25.1.47.1.9Counter32read-onlycurrent
extremeWirelessClientWPAStatsEAPOLKeyReceivedInPairwise3Key
OBJECT-TYPE
Number of times an EAPOL Key packet was recieved after sending the 3rd pairwise key exchange packet
1.3.6.1.4.1.1916.1.25.1.47.1.10Counter32read-onlycurrent
extremeWirelessClientWPAStatsEAPOLKeyReceivedInGroupKey
OBJECT-TYPE
Number of times an EAPOL Key packet was recieved after sending the group key packet
1.3.6.1.4.1.1916.1.25.1.47.1.11Counter32read-onlycurrent
extremeWirelessClientWPAStatsDoubleEAPOLKeyReceived
OBJECT-TYPE
Number of times an EAPOL Key packet was recieved when already processing a previous key packet.
1.3.6.1.4.1.1916.1.25.1.47.1.12Counter32read-onlycurrent
extremeWirelessClientWPAStatsEAPOLKeyIgnores
OBJECT-TYPE
Number of times an EAPOL Key packet was ignored.
1.3.6.1.4.1.1916.1.25.1.47.1.13Counter32read-onlycurrent
extremeWirelessClientWPAStatsEAPOLKeyErrors
OBJECT-TYPE
Number of times an EAPOL Key packet was errored.
1.3.6.1.4.1.1916.1.25.1.47.1.14Counter32read-onlycurrent
extremeWirelessClientWPAStatsEAPOLKeyAborts
OBJECT-TYPE
Number of times an EAPOL Key packet caused the WPA state machine to abort.
1.3.6.1.4.1.1916.1.25.1.47.1.15Counter32read-onlycurrent
extremeWirelessClientWPAStatsEAPOLKeyVerificationSuccesses
OBJECT-TYPE
Number of times an EAPOL Key packet was verified correctly.
1.3.6.1.4.1.1916.1.25.1.47.1.16Counter32read-onlycurrent
extremeWirelessOpaqueTable
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.99not-accessiblecurrent
extremeWirelessOpaqueEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.99.1not-accessiblecurrent
extremeWirelessClientData
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.99.1.1OCTET STRINGread-onlycurrent
extremeWirelessPAEStatsData
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.99.1.2OCTET STRINGread-onlycurrent
extremeWirelessPAEDiagData
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.99.1.3OCTET STRINGread-onlycurrent
extremeWirelessScanResultsData
OBJECT-TYPE
This is the contents of the scan results table encoded as a series of TLVs.
1.3.6.1.4.1.1916.1.25.1.99.1.4OCTET STRINGread-onlycurrent
extremeWirelessProbeInfoData
OBJECT-TYPE
This is the contents of the probe info table encoded as a series of TLVs. Each item is encoded as the entry above.
1.3.6.1.4.1.1916.1.25.1.99.1.5OCTET STRINGread-onlycurrent
extremeWirelessClientDiagData
OBJECT-TYPE
This is the contents of the client diag table encoded as a series of TLVs. Each item is encoded as the entry above.
1.3.6.1.4.1.1916.1.25.1.99.1.6OCTET STRINGread-onlycurrent
extremeWirelessClientAssocData
OBJECT-TYPE
This is the contents of the client assoc table encoded as a series of TLVs. Each item is encoded as the entry above. Note that since the MAC address is not a member of the table (it is an index) it will be encoded as type = 0.
1.3.6.1.4.1.1916.1.25.1.99.1.7OCTET STRINGread-onlycurrent
extremeWirelessClientAuthData
OBJECT-TYPE
This is the contents of the client auth table encoded as a series of TLVs. Each item is encoded as the entry above. Note that since the MAC address is not a member of the table (it is an index) it will be encoded as type = 0.
1.3.6.1.4.1.1916.1.25.1.99.1.8OCTET STRINGread-onlycurrent
extremeWirelessClientMACInfoData
OBJECT-TYPE
This is the contents of the client MAC info table encoded as a series of TLVs. Each item is encoded as the entry above. Note that since the MAC address is not a member of the table (it is an index) it will be encoded as type = 0.
1.3.6.1.4.1.1916.1.25.1.99.1.9OCTET STRINGread-onlycurrent
extremeWirelessSizeCounterData
OBJECT-TYPE
This is the contents of the client size counter table encoded as a series of TLVs. Each item is encoded as the entry above. Note that since the MAC address is not a member of the table (it is an index) it will be encoded as type = 0.
1.3.6.1.4.1.1916.1.25.1.99.1.10OCTET STRINGread-onlycurrent
extremeWirelessSpeedCounterData
OBJECT-TYPE
This is the contents of the client speed counter table encoded as a series of TLVs. Each item is encoded as the entry above. Note that since the MAC address is not a member of the table (it is an index) it will be encoded as type = 0.
1.3.6.1.4.1.1916.1.25.1.99.1.11OCTET STRINGread-onlycurrent
extremeWirelessTraceTable
OBJECT-TYPE
This table contains one entry per wireless port. This allows access to various stastics about the tracing mod -- ule on that wireless port.
1.3.6.1.4.1.1916.1.25.1.100not-accessiblecurrent
extremeWirelessTraceEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.100.1not-accessiblecurrent
extremeWirelessTraceMsgsOut
OBJECT-TYPE
This gives the number of trace messages the system has sent out to the syslog server. Suppressed messages are not counted toward this total.
1.3.6.1.4.1.1916.1.25.1.100.1.1INTEGERread-onlycurrent
extremeWirelessTraceBytesOut
OBJECT-TYPE
This give the number of bytes total sent out by the trace system. This is a simple sum of the string lengths of all messages sent out.
1.3.6.1.4.1.1916.1.25.1.100.1.2INTEGERread-onlycurrent
extremeWirelessTraceSuppressed
OBJECT-TYPE
This variable is incremented whenever a message is not sent out because the trace level of that system is lower than the message level.
1.3.6.1.4.1.1916.1.25.1.100.1.3INTEGERread-onlycurrent
extremeWirelessTraceOtherErr
OBJECT-TYPE
This variable is incremented when a message is not sent out due to internal errors (i.e. out of memory).
1.3.6.1.4.1.1916.1.25.1.100.1.4INTEGERread-onlycurrent
extremeWirelessTraceOpaque
OBJECT-TYPE
This is the opaque representation of the module table to optimize retreival.
1.3.6.1.4.1.1916.1.25.1.100.1.5OCTET STRINGread-onlycurrent
extremeWirelessTraceModuleTable
OBJECT-TYPE
This table contains one entry per trace module. Each entry is indexed by an arbitrary integer value.
1.3.6.1.4.1.1916.1.25.1.101not-accessiblecurrent
extremeWirelessTraceModuleEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.1.101.1not-accessiblecurrent
extremeWirelessTraceModuleId
OBJECT-TYPE
This is an arbitrary integer index which is assigned to each trace module.
1.3.6.1.4.1.1916.1.25.1.101.1.1INTEGER (0..65535)not-accessiblecurrent
extremeWirelessTraceModuleDesc
OBJECT-TYPE
This is a string which briefly describes the purpose of this debug trace. It may include whitespace. An example is: 802.1x State Machine
1.3.6.1.4.1.1916.1.25.1.101.1.2DisplayStringread-onlycurrent
extremeWirelessTraceModuleHeader
OBJECT-TYPE
This is a string which is prepended to the syslog messages sent out by this debug level. It is short (5-6 characters) and does not contain white space. (i.e. DOT1X)
1.3.6.1.4.1.1916.1.25.1.101.1.3DisplayStringread-onlycurrent
extremeWirelessTraceModuleLevel
OBJECT-TYPE
This value is the current debug level for this module. A lower value indicates that fewer messages will be generated by the component. A write on this value will update the current debug level.
1.3.6.1.4.1.1916.1.25.1.101.1.4INTEGER (0..5)read-writecurrent
extremeWirelessTraceModuleSuppressed
OBJECT-TYPE
This value indicates the number of messages logged by this module which have not been sent out because the current log level is less than the level at which the message should be logged.
1.3.6.1.4.1.1916.1.25.1.101.1.5INTEGERread-onlycurrent
extremeWirelessTraceModuleMsgsOut
OBJECT-TYPE
This value indicates the number messages which have been logged by this component.
1.3.6.1.4.1.1916.1.25.1.101.1.6INTEGERread-onlycurrent
extremeWirelessTraceModuleBytesOut
OBJECT-TYPE
This value indicates the number of bytes which have been logged by this component. This count includes the header specified in extremeWirelessTraceModuleHeader.
1.3.6.1.4.1.1916.1.25.1.101.1.7INTEGERread-onlycurrent
extremeWirelessLogDiagTable
OBJECT-TYPE
This table contains counters per-log level for the event log, syslog and NVRAM subsystems for logging.
1.3.6.1.4.1.1916.1.25.1.102not-accessiblecurrent
extremeWirelessLogDiagEntry
OBJECT-TYPE
There is one entry in this table per physical port.
1.3.6.1.4.1.1916.1.25.1.102.1not-accessiblecurrent
extremeWirelessLogDiagEventLogTotalCount
OBJECT-TYPE
This gives the total number of messages logged since the last time the statistics were cleared.
1.3.6.1.4.1.1916.1.25.1.102.1.1Unsigned32read-onlycurrent
extremeWirelessLogDiagEventLogTotalEmergCount
OBJECT-TYPE
This gives the total number of messages logged at the EMERG level.
1.3.6.1.4.1.1916.1.25.1.102.1.2Unsigned32read-onlycurrent
extremeWirelessLogDiagEventLogTotalAlertCount
OBJECT-TYPE
This gives the total number of messages logged at the ALERT level.
1.3.6.1.4.1.1916.1.25.1.102.1.3Unsigned32read-onlycurrent
extremeWirelessLogDiagEventLogTotalCritCount
OBJECT-TYPE
This gives the total number of messages logged at the CRIT level.
1.3.6.1.4.1.1916.1.25.1.102.1.4Unsigned32read-onlycurrent
extremeWirelessLogDiagEventLogTotalErrorCount
OBJECT-TYPE
This gives the total number of messages logged at the ERROR level.
1.3.6.1.4.1.1916.1.25.1.102.1.5Unsigned32read-onlycurrent
extremeWirelessLogDiagEventLogTotalWarnCount
OBJECT-TYPE
This gives the total number of messages logged at the WARN level.
1.3.6.1.4.1.1916.1.25.1.102.1.6Unsigned32read-onlycurrent
extremeWirelessLogDiagEventLogTotalNoticeCount
OBJECT-TYPE
This gives the total number of messages logged at the NOTICE level.
1.3.6.1.4.1.1916.1.25.1.102.1.7Unsigned32read-onlycurrent
extremeWirelessLogDiagEventLogTotalInfoCount
OBJECT-TYPE
This gives the total number of messages logged at the INFO level.
1.3.6.1.4.1.1916.1.25.1.102.1.8Unsigned32read-onlycurrent
extremeWirelessLogDiagEventLogTotalDebugCount
OBJECT-TYPE
This gives the total number of messages logged at the DEBUG level.
1.3.6.1.4.1.1916.1.25.1.102.1.9Unsigned32read-onlycurrent
extremeWirelessLogDiagEventLogTotalSuppressedCount
OBJECT-TYPE
This gives the total number of messages which were suppressed due to log level.
1.3.6.1.4.1.1916.1.25.1.102.1.10Unsigned32read-onlycurrent
extremeWirelessLogDiagEventLogTotalByteCount
OBJECT-TYPE
This gives the total number of bytes logged by the logging subsystem.
1.3.6.1.4.1.1916.1.25.1.102.1.11Unsigned32read-onlycurrent
extremeWirelessLogDiagSyslogTotalEventCount
OBJECT-TYPE
This gives the total number of messages which have been sent out to remote syslog servers.
1.3.6.1.4.1.1916.1.25.1.102.1.12Unsigned32read-onlycurrent
extremeWirelessLogDiagSyslogTotalSuppressedCount
OBJECT-TYPE
This gives the total number of syslog messages which have been suppressed due to log level.
1.3.6.1.4.1.1916.1.25.1.102.1.13Unsigned32read-onlycurrent
extremeWirelessLogDiagSyslogTotalByteCount
OBJECT-TYPE
This gives the total number of bytes of syslog messages which have been logged.
1.3.6.1.4.1.1916.1.25.1.102.1.14Unsigned32read-onlycurrent
extremeWirelessLogDiagNVRAMTotalEventCount
OBJECT-TYPE
Total number of messages which have been logged to NVRAM.
1.3.6.1.4.1.1916.1.25.1.102.1.15Unsigned32read-onlycurrent
extremeWirelessLogDiagNVRAMTotalSuppressedCount
OBJECT-TYPE
Total number of messages which have been suppressed by NVRAM due to NVRAM threashold.
1.3.6.1.4.1.1916.1.25.1.102.1.16Unsigned32read-onlycurrent
extremeWirelessLogDiagNVRAMTotalDroppedCount
OBJECT-TYPE
Total number of messages which have been dropped by the NVRAM.
1.3.6.1.4.1.1916.1.25.1.102.1.17Unsigned32read-onlycurrent
extremeWirelessLogDiagNVRAMTotalByteCount
OBJECT-TYPE
Total number of bytes which have been written to the NVRAM.
1.3.6.1.4.1.1916.1.25.1.102.1.18Unsigned32read-onlycurrent
extremeWirelessLogDiagClearStats
OBJECT-TYPE
Setting this value to TRUE causes the statistics to be reset to 0. Reading this value has no meaning.
1.3.6.1.4.1.1916.1.25.1.102.1.19TruthValueread-writecurrent
extremeLACGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.25.2.1
extremeAPTotalAuthFailures
OBJECT-TYPE
This variable gives the total number of Authentication failures that have been seen by all the wireless ports.
1.3.6.1.4.1.1916.1.25.2.1.1INTEGERread-onlycurrent
extremeAPTotalDetectedStations
OBJECT-TYPE
This variable gives the total number of detected stations on all the wireless ports.
1.3.6.1.4.1.1916.1.25.2.1.2INTEGERread-onlycurrent
extremeAPTotalAssociatedStations
OBJECT-TYPE
This variable gives the total number of associated stations on all the wireless ports.
1.3.6.1.4.1.1916.1.25.2.1.3INTEGERread-onlycurrent
extremeAPTotalAuthenticatedStations
OBJECT-TYPE
This variable gives the total number of authenticated stations on all the wireless ports.
1.3.6.1.4.1.1916.1.25.2.1.4INTEGERread-onlycurrent
extremeWirelessCfgMgmtVLAN
OBJECT-TYPE
This value indicates the VLAN tag that should be applied to all control traffic between the AP and the platform.
1.3.6.1.4.1.1916.1.25.2.1.5INTEGERread-writecurrent
extremeWirelessCfgNetmask
OBJECT-TYPE
This value is the subnet of the Mgmt Vlan
1.3.6.1.4.1.1916.1.25.2.1.6IpAddressread-writecurrent
extremeWirelessCfgGateway
OBJECT-TYPE
This value is assigned to the APs as the gateway for the management vlan.
1.3.6.1.4.1.1916.1.25.2.1.7IpAddressread-writecurrent
extremeWirelessCfgEnableWirelessTraps
OBJECT-TYPE
If set to TRUE the wireless port will send traps for Authentication and association events. If set to FALSE no traps will be generated. Note: We always generate the wireless port status traps.
1.3.6.1.4.1.1916.1.25.2.1.8TruthValueread-writecurrent
extremeWirelessCfgCountryCode
OBJECT-TYPE
This variable allows configuration of the country code in which the AP will operate. Setting this value will enable the AP to range check frequency and other regulatory settings.
1.3.6.1.4.1.1916.1.25.2.1.10ExtremeWirelessCountryCoderead-writecurrent
extremeProfile
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.25.2.2
extremeRFProfile
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.25.2.2.1
extremeRFProfileTable
OBJECT-TYPE
There is one entry in this table for each RF profile defined on the LAC. Configuration for wireless intf. should only be done by manipulating these variables. Changes here will be reflected in the corresponding 802dot11 MIB variables (see references below). On bootup this table should be populated with one default entry for each supported type (A, G, etc).
1.3.6.1.4.1.1916.1.25.2.2.1.1not-accessiblecurrent
extremeRFProfileEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.1.1.1not-accessiblecurrent
extremeRFProfileIndex
OBJECT-TYPE
Integer index for this table. This is here to avoid having to index into the table via the string name.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.1INTEGER (1..34)not-accessiblecurrent
extremeRFProfileName
OBJECT-TYPE
String name of this profile. The value |default| is a special token and should not be allowed.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.2DisplayString (SIZE(1..32))read-createcurrent
extremeRFProfileType
OBJECT-TYPE
This is the type of this RF profile. This will decide the ranges of some of the values (i.e. channel).
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.3Dot11Typeread-createcurrent
extremeRFProfileBeaconInterval
OBJECT-TYPE
This is the number of TU between beacon frames.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.5INTEGER (1..65535)read-createcurrent
extremeRFProfileDTIM
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.6INTEGER (1..255)read-createcurrent
extremeRFProfileFragLength
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.7INTEGER (256..2345)read-createcurrent
extremeRFProfileRTSThresh
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.8INTEGER (0..2347)read-createcurrent
extremeRFProfilePreamble
OBJECT-TYPE
This changes the 802 preamble expected by the interface.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.9INTEGER {short(0), long(1)}read-createcurrent
extremeRFProfileShortRetry
OBJECT-TYPE
Attribute indicates the maximum number of transmission attempts of a frame whose size is <= RTS.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.11INTEGER (1..255)read-createcurrent
extremeRFProfileLongRetry
OBJECT-TYPE
Attribute indicates the maximum number of transmission attempts of a frame whose size is > RTS.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.12INTEGER (1..255)read-createcurrent
extremeRFProfileStatus
OBJECT-TYPE
Standard row-status semantics.
1.3.6.1.4.1.1916.1.25.2.2.1.1.1.13RowStatusread-createcurrent
extremeSecurityProfile
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.25.2.2.2
extremeSecurityProfileTable
OBJECT-TYPE
There is one entry in this table per security profile on the LAC. Each profile is identified by a string name.
1.3.6.1.4.1.1916.1.25.2.2.2.1not-accessiblecurrent
extremeSecurityProfileEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.2.1.1not-accessiblecurrent
extremeSecurityProfileIndex
OBJECT-TYPE
This is an integer index used instead of string name.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.1INTEGER (1..32)not-accessiblecurrent
extremeSecurityProfileName
OBJECT-TYPE
This is a unique string name which identifies this profile. The token |default| is special and should not be allowed.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.2DisplayString (SIZE(1..32))read-createcurrent
extremeSecurityProfileESSName
OBJECT-TYPE
This is the desired ESS name.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.3OCTET STRING (SIZE(0..32))read-createcurrent
extremeSecurityProfileSSIDInBeacon
OBJECT-TYPE
Setting this value to true will have the channel place the ssid in the beacon frame.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.4TruthValueread-createcurrent
extremeSecurityProfileDot11AuthMode
OBJECT-TYPE
Specified whether to use open or shared authentication
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.5Dot11AuthModenot-accessiblecurrent
extremeSecurityProfileNetworkAuthMode
OBJECT-TYPE
This specifies the authentication to use on top of dot11 mac authentication
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.6NetworkAuthModenot-accessiblecurrent
extremeSecurityProfileDataVlan
OBJECT-TYPE
This specifies the VLAN to use in case it does not come back as a VSA or in case the IgnoreVSAVlan is set to true
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.7INTEGERnot-accessiblecurrent
extremeSecurityProfileIgnoreVSAVlan
OBJECT-TYPE
This specifies if Vlan associations in VSAs from the radius server has to be ignored or not
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.8TruthValueread-createcurrent
extremeSecurityWEPDefaultKey
OBJECT-TYPE
This value indicates the index in extremeWEPKeyTable that identifies the key this interface will use to decrypt packets.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.9INTEGERread-createcurrent
extremeSecurityProfileEncryptionLength
OBJECT-TYPE
This gives the size in bits of the key. This variable defines the length of all WEP keys and also the encryption to use in case of legacy dot1x. If the encryption is set to none then no WEP encryption is set.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.10INTEGER {none(0), sixtyfour(64), onetwentyeight(128)}read-createcurrent
extremeSecurityProfileStatus
OBJECT-TYPE
Standard row-creation semantics.
1.3.6.1.4.1.1916.1.25.2.2.2.1.1.11RowStatusread-createcurrent
extremeSecurityDot1xConfigTable
OBJECT-TYPE
There is one entry in this table per security profile on the LAC. It reflects the dot1x security config
1.3.6.1.4.1.1916.1.25.2.2.2.2not-accessiblecurrent
extremeSecurityDot1xConfigEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.2.2.1not-accessiblecurrent
extremeSecurityKeyMgmtSuite
OBJECT-TYPE
This bitmask configures the authentication suites to be used.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.1WPAKeyMgmtSetread-writecurrent
extremeSecurityMcastCipherSuite
OBJECT-TYPE
This configures the cipher suite to use for mcast traffic. The cipher suite to use for unicast traffic is derived from this using the following algorithm: Mcast cipher = WEP (64/128), Unicast cipher = TKIP Mcast cipher = TKIP, Unicast cipher = TKIP Mcast cipher = AES, Unicast cipher = AES. This therefore determines the max unicast cipher suite the client can use to associate with this interface.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.2WPACipherSetread-writecurrent
extremeSecurityDot1xPSKValue
OBJECT-TYPE
The Pre-Shared Key (PSK) for when RSN in PSK mode is the selected authentication suite.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.3OCTET STRING (SIZE(32))read-writecurrent
extremeSecurityDot1xPSKPassPhrase
OBJECT-TYPE
The PSK, for when WPA in PSK mode is the selected authentication suite, is configured by extremeSecurityKeyMgmtSuite. An alternative manner of setting the PSK uses the password-to-key algorithm defined in section XXX. This variable provides a means to enter a pass phrase. When this object is written, the RSN entity shall use the password-to-key algorithm specified in section XXX to derive a pre-shared and populate extremeSecurityDot1xPSKValue with this key. This object is logically write-only. Reading this variable shall return unsuccessful status or null or zero.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.4DisplayStringread-writecurrent
extremeSecurityDot1xReAuthPeriod
OBJECT-TYPE
Number of seconds a clients authentication will last before the AP automatically issues a reauthentication request.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.5INTEGERread-writecurrent
extremeSecurityGroupUpdateTimeOut
OBJECT-TYPE
The time in minutes after which the RSN group update handshake will be retried. The timer shall start at the moment the group update message is sent.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.6Unsigned32 (1..1440)read-writecurrent
extremeSecurityPairwiseUpdateTimeOut
OBJECT-TYPE
The time in minutes after which the RSN 4-way handshake will be retried. The timer shall start at the moment a 4-way message is sent.
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.7Unsigned32 (1..1440)read-writecurrent
extremeSecurityDot11iPreauthEnabled
OBJECT-TYPE
Whether preauth is enabled or not
1.3.6.1.4.1.1916.1.25.2.2.2.2.1.8TruthValueread-writecurrent
extremeWEPKeyTable
OBJECT-TYPE
This table contains per-profile WEP keys. Reference ieee802dot11.1.2.3.
1.3.6.1.4.1.1916.1.25.2.2.2.4not-accessiblecurrent
extremeWEPKeyEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.2.4.1not-accessiblecurrent
extremeWEPKeyIndex
OBJECT-TYPE
There can be upto 8 wep keys for any wireless interface. Four of the keys are to be used with WEP Authentication, and the other four with MAC Auth.
1.3.6.1.4.1.1916.1.25.2.2.2.4.1.1INTEGER (0..8)not-accessiblecurrent
extremeWEPKey
OBJECT-TYPE
This is a write-only wep key.
1.3.6.1.4.1.1916.1.25.2.2.2.4.1.2OCTET STRING (SIZE(1..19))read-createcurrent
extremeWEPKeyStatus
OBJECT-TYPE
Standard row-creation semantics.
1.3.6.1.4.1.1916.1.25.2.2.2.4.1.3RowStatusread-createcurrent
extremeWirelessPhysInterfaceConfigTable
OBJECT-TYPE
This table contains the configured bindings between physical wireless interfaces and RF profiles and other RF properties. There is one instance of a physical wireless interface per radio on the AP. Entries in this table have a duration that exceeds the lifetime of entries in the wirelessPhysInterfaceCtlTable. A configured binding spans the reset or removal of a wireless interface. Entries can be removed from this table by the user. If there is a mismatch between a new wireless port and a previously configured profile, the default profile will be applied and this table will be updated.
1.3.6.1.4.1.1916.1.25.2.2.3not-accessiblecurrent
extremeWirelessPhysInterfaceConfigEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.3.1not-accessiblecurrent
extremeWirelessPhysInterfaceConfigRFProfile
OBJECT-TYPE
This is the index into the extremeRFProfileTable for the RF profile that this wireless interface is bound to. The default value is equivalent to the profile index for the interface-appropriate default in the table.
1.3.6.1.4.1.1916.1.25.2.2.3.1.1INTEGERread-createcurrent
extremeWirelessPhysInterfaceConfigRFChannel
OBJECT-TYPE
This is the RF channel which has been selected for this wireless interface. It should be one of the supported channels as given by the phy tables in the dot11 mib.
1.3.6.1.4.1.1916.1.25.2.2.3.1.2INTEGERread-createcurrent
extremeWirelessPhysInterfaceConfigSpeed
OBJECT-TYPE
This is the speed to configure the interface at. A value of 0 indicates automatic speed detection.
1.3.6.1.4.1.1916.1.25.2.2.3.1.3Dot11Speedread-createcurrent
extremeWirelessPhysInterfaceConfigPowerLevel
OBJECT-TYPE
This value specifies the tx power (in % of max power) to use.
1.3.6.1.4.1.1916.1.25.2.2.3.1.4INTEGERread-createcurrent
extremeWirelessVirtInterfaceConfigTable
OBJECT-TYPE
This table contains the configured bindings between virtual wireless interfaces and security profiles and other security properties. There are upto 8 virtual interface for each physical interface. Entries in this table have a duration that exceeds the lifetime of entries in the wirelessVirtInterfaceCtlTable. A configured binding spans the reset or removal of a wireless interface. Entries can be removed from this table by the user.
1.3.6.1.4.1.1916.1.25.2.2.4not-accessiblecurrent
extremeWirelessVirtInterfaceConfigEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.4.1not-accessiblecurrent
extremeWirelessVirtInterfaceConfigSecurityProfile
OBJECT-TYPE
This is the index into the extremeSecurityProfileTable for the security profile that this wireless interface is bound to. The default value is equivalent to the profile index for the interface-appropriate default in the table.
1.3.6.1.4.1.1916.1.25.2.2.4.1.1INTEGERread-writecurrent
extremeWirelessVirtInterfaceConfigMaxClients
OBJECT-TYPE
The maximum number of clients that can associate with this virtual interface.
1.3.6.1.4.1.1916.1.25.2.2.4.1.2INTEGER (1..128)read-onlycurrent
extremeWirelessVirtInterfaceConfigWirelessBridging
OBJECT-TYPE
This specifies whether wireless bridging is enabled on this interface. If wireless bridging is enabled then traffic originating from a client on this interface will be bridged to clients on the same VLAN on this or other virtual interfaces that have wireless bridging enabled. So basically wireless bridging should be enabled on both the source and the destination virtual interface for traffic to be bridged.
1.3.6.1.4.1.1916.1.25.2.2.4.1.3TruthValueread-writecurrent
extremeWirelessVirtInterfaceConfigState
OBJECT-TYPE
This value specifies whether the virtual interface is active or not
1.3.6.1.4.1.1916.1.25.2.2.4.1.4INTEGER {enabled(0), disabled(1)}read-writecurrent
extremeAntennaProfile
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.25.2.2.5
extremeAntennaProfileTable
OBJECT-TYPE
There is one entry in this table per antenna profile on the LAC. Each profile is identified by a string name.
1.3.6.1.4.1.1916.1.25.2.2.5.1not-accessiblecurrent
extremeAntennaProfileEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.5.1.1not-accessiblecurrent
extremeAntennaProfileIndex
OBJECT-TYPE
This is an integer index used instead of string name.
1.3.6.1.4.1.1916.1.25.2.2.5.1.1.1INTEGER (1..32)not-accessiblecurrent
extremeAntennaProfileName
OBJECT-TYPE
This is a unique string name which identifies this profile. The token |default| is special and should not be allowed.
1.3.6.1.4.1.1916.1.25.2.2.5.1.1.2DisplayString (SIZE(1..32))read-createcurrent
extremeAntennaProfile2point4GHZGain
OBJECT-TYPE
This specifies 2.4GHz gain value for detachable antenna in dbi
1.3.6.1.4.1.1916.1.25.2.2.5.1.1.3INTEGERread-createcurrent
extremeAntennaProfile5GHZGain
OBJECT-TYPE
This specifies 5GHz gain value for detachable antenna in dbi
1.3.6.1.4.1.1916.1.25.2.2.5.1.1.4INTEGERread-createcurrent
extremeAntennaProfileStatus
OBJECT-TYPE
Standard row-creation semantics.
1.3.6.1.4.1.1916.1.25.2.2.5.1.1.5RowStatusread-createcurrent
extremeWirelessRemoteConnectGlobalCfgGroup
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.25.2.2.6
extremeWirelessRemoteConnectGlobalBindingType
OBJECT-TYPE
Global Binding Tye
1.3.6.1.4.1.1916.1.25.2.2.6.1WirelessRemoteConnectBindingTyperead-writecurrent
extremeWirelessRemoteConnectBindingTable
OBJECT-TYPE
This table specifies the RemoteConnect binding configuration for various ports.
1.3.6.1.4.1.1916.1.25.2.2.7not-accessiblecurrent
extremeWirelessRemoteConnectBindingEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.7.1not-accessiblecurrent
extremeWirelessRemoteConnectBindingPortIndex
OBJECT-TYPE
The index of this binding. This maps one-to-one with the value specified in the CLI. For example, if you say v:1 in the CLI, then this value should be 1.
1.3.6.1.4.1.1916.1.25.2.2.7.1.1INTEGER (1..48)not-accessiblecurrent
extremeWirelessRemoteConnectBindingIfIndex
OBJECT-TYPE
This is the IF index that is used in the extremeWirelessPortConfigTable etc to refer to this RemoteConnect port.
1.3.6.1.4.1.1916.1.25.2.2.7.1.2Integer32read-onlycurrent
extremeWirelessRemoteConnectBindingType
OBJECT-TYPE
This is the type of binding. Based on this, one of the following columns will be valid.
1.3.6.1.4.1.1916.1.25.2.2.7.1.3WirelessRemoteConnectBindingTyperead-createcurrent
extremeWirelessRemoteConnectBindingMAC
OBJECT-TYPE
The MAC address of the AP that is bound to this virtual port. This is valid only if the extremeWirelessRemoteConnectBindingType is set to mac-address
1.3.6.1.4.1.1916.1.25.2.2.7.1.4MacAddressread-createcurrent
extremeWirelessRemoteConnectBindingSerial
OBJECT-TYPE
The serial number of the AP that is bound to this virtual port. This is valid only if the extremeWirelessRemoteConnectBindingType is set to serial-number
1.3.6.1.4.1.1916.1.25.2.2.7.1.5OCTET STRINGread-createcurrent
extremeWirelessRemoteConnectBindingIPAddressType
OBJECT-TYPE
The IP address type of the AP that is bound to this virtual port. This is valid only if the extremeWirelessRemoteConnectBindingType is set to ip-address
1.3.6.1.4.1.1916.1.25.2.2.7.1.6InetAddressTyperead-createcurrent
extremeWirelessRemoteConnectBindingIPAddress
OBJECT-TYPE
The IP address of the AP that is bound to this virtual port. This is valid only if the extremeWirelessRemoteConnectBindingType is set to ip-address
1.3.6.1.4.1.1916.1.25.2.2.7.1.7InetAddressread-createcurrent
extremeWirelessRemoteConnectBindingEnabled
OBJECT-TYPE
An entry in this table can be created but left as disabled. If you set this variable to True then the RemoteConnect controller will consider this binding when trying to map APs to RemoteConnect ports. Else, it will ignore it.
1.3.6.1.4.1.1916.1.25.2.2.7.1.8TruthValueread-writecurrent
extremeWirelessRemoteConnectBindingBound
OBJECT-TYPE
Specifies if an AP has come up and has been matched to this binding. If this is true, then the extremeWirelessPortStatus table will have an entry for this RemoteConnect port.
1.3.6.1.4.1.1916.1.25.2.2.7.1.9TruthValueread-writecurrent
extremeWirelessRemoteConnectBindingRowStatus
OBJECT-TYPE
RowStatus attribute. When this row is deleted, the binding goes away
1.3.6.1.4.1.1916.1.25.2.2.7.1.10RowStatusread-createcurrent
extremeWirelessRemoteConnectRedirectBindingTable
OBJECT-TYPE
This table specifies the RemoteConnect redirection configuration for various ports.
1.3.6.1.4.1.1916.1.25.2.2.8not-accessiblecurrent
extremeWirelessRemoteConnectRedirectBindingEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.8.1not-accessiblecurrent
extremeWirelessRemoteConnectRedirectBindingIndex
OBJECT-TYPE
The index of this RedirectBinding.
1.3.6.1.4.1.1916.1.25.2.2.8.1.1INTEGER (1..255)not-accessiblecurrent
extremeWirelessRemoteConnectRedirectBindingType
OBJECT-TYPE
This is the type of RedirectBinding. Based on this, one of the following columns will be valid.
1.3.6.1.4.1.1916.1.25.2.2.8.1.2WirelessRemoteConnectBindingTyperead-createcurrent
extremeWirelessRemoteConnectRedirectBindingMAC
OBJECT-TYPE
The MAC address of the AP that will be redirected. This is valid only if the extremeWirelessRemoteConnectRedirectBindingType is set to mac-address
1.3.6.1.4.1.1916.1.25.2.2.8.1.3MacAddressread-createcurrent
extremeWirelessRemoteConnectRedirectBindingSerial
OBJECT-TYPE
The serial number of the AP that is bound to this virtual port. This is valid only if the extremeWirelessRemoteConnectRedirectBindingType is set to serial-number
1.3.6.1.4.1.1916.1.25.2.2.8.1.4OCTET STRINGread-createcurrent
extremeWirelessRemoteConnectRedirectBindingIPAddressType
OBJECT-TYPE
The IP address type of the AP that will be redirected. This is valid only if the extremeWirelessRemoteConnectRedirectBindingType is set to ip-address
1.3.6.1.4.1.1916.1.25.2.2.8.1.5InetAddressTyperead-createcurrent
extremeWirelessRemoteConnectRedirectBindingIPAddress
OBJECT-TYPE
The IP address of the AP that will be redirected. This is valid only if the extremeWirelessRemoteConnectRedirectBindingType is set to ip-address
1.3.6.1.4.1.1916.1.25.2.2.8.1.6InetAddressread-createcurrent
extremeWirelessRemoteConnectRedirectBindAttachSwitchIPAddrType
OBJECT-TYPE
The IP address type of the slave
1.3.6.1.4.1.1916.1.25.2.2.8.1.7InetAddressTyperead-createcurrent
extremeWirelessRemoteConnectRedirectBindAttachSwitchIPAddr
OBJECT-TYPE
The IP address of the slave
1.3.6.1.4.1.1916.1.25.2.2.8.1.8InetAddressread-createcurrent
extremeWirelessRemoteConnectRedirectBindingEnabled
OBJECT-TYPE
An entry in this table can be created but left as disabled. If you set this variable to True then the RemoteConnect controller will consider this RedirectBinding when trying to redirect APs. Else, it will ignore it.
1.3.6.1.4.1.1916.1.25.2.2.8.1.9TruthValueread-writecurrent
extremeWirelessRemoteConnectRedirectBindingNumRedirects
OBJECT-TYPE
The number of times this redirect has been invoked.
1.3.6.1.4.1.1916.1.25.2.2.8.1.10Counter32read-onlycurrent
extremeWirelessRemoteConnectRedirectBindingRowStatus
OBJECT-TYPE
Standard row status semantics.
1.3.6.1.4.1.1916.1.25.2.2.8.1.11RowStatusread-writecurrent
extremeWirelessRemoteConnectDeviceDBGroup
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.25.2.2.9
extremeWirelessRemoteConnectDeviceDBTimeOut
OBJECT-TYPE
Timeout value for unbound APs entry in seconds. 0 for disable
1.3.6.1.4.1.1916.1.25.2.2.9.1INTEGER (0 | 30..3600)read-writecurrent
extremeWirelessRemoteConnectUnboundAPsTable
OBJECT-TYPE
This table contains the list of APs that could not be bound or redirected.
1.3.6.1.4.1.1916.1.25.2.2.10not-accessiblecurrent
extremeWirelessRemoteConnectUnboundAPsEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.2.10.1not-accessiblecurrent
extremeWirelessRemoteConnectUnboundAPsIndex
OBJECT-TYPE
The index of this table.
1.3.6.1.4.1.1916.1.25.2.2.10.1.1INTEGER (0..65535)not-accessiblecurrent
extremeWirelessRemoteConnectUnboundAPsMAC
OBJECT-TYPE
The MAC address of the unbound AP.
1.3.6.1.4.1.1916.1.25.2.2.10.1.2MacAddressread-onlycurrent
extremeWirelessRemoteConnectUnboundAPsSerial
OBJECT-TYPE
The serial number of the unbound AP
1.3.6.1.4.1.1916.1.25.2.2.10.1.3OCTET STRINGread-onlycurrent
extremeWirelessRemoteConnectUnboundAPsIPAddressType
OBJECT-TYPE
The IP address type of the unbound AP
1.3.6.1.4.1.1916.1.25.2.2.10.1.4InetAddressTyperead-onlycurrent
extremeWirelessRemoteConnectUnboundAPsIPAddress
OBJECT-TYPE
The IP address of the unbound AP
1.3.6.1.4.1.1916.1.25.2.2.10.1.5InetAddressread-onlycurrent
extremeWirelessRemoteConnectUnboundAPsNumAttempts
OBJECT-TYPE
The number of times this AP contacted this controller.
1.3.6.1.4.1.1916.1.25.2.2.10.1.6Counter32read-onlycurrent
extremeWirelessRemoteConnectUnboundAPsRowStatus
OBJECT-TYPE
Standard row status semantics. Only valid value to set is destroy (6).
1.3.6.1.4.1.1916.1.25.2.2.10.1.7RowStatusread-createcurrent
extremeWirelessPortCfgTable
OBJECT-TYPE
This table contains one entry per wireless port that the user has configured. The AP does not have to be plugged in for the user to configure it via this table.
1.3.6.1.4.1.1916.1.25.2.3not-accessiblecurrent
extremeWirelessPortCfgEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.25.2.3.1not-accessiblecurrent
extremeWirelessPortIfIndex
OBJECT-TYPE
This is the MIB-II ifIndex of the port this entry describes.
1.3.6.1.4.1.1916.1.25.2.3.1.1InterfaceIndexread-onlycurrent
extremeWirelessPortCfgIpAddress
OBJECT-TYPE
This value is assigned to the port for external management.
1.3.6.1.4.1.1916.1.25.2.3.1.2IpAddressread-writecurrent
extremeWirelessPortCfgLocation
OBJECT-TYPE
This describes the physical location of the wireless port.
1.3.6.1.4.1.1916.1.25.2.3.1.3DisplayStringread-writecurrent
extremeWirelessPortCfgDetectedTimeout
OBJECT-TYPE
This is the number of seconds a station can stay in the detected station table without authenticating.
1.3.6.1.4.1.1916.1.25.2.3.1.4TimeTicksread-writecurrent
extremeWirelessPortCfgClientWatchdog
OBJECT-TYPE
Setting this value to true will force the AP to run a watch-dog process for system health.
1.3.6.1.4.1.1916.1.25.2.3.1.5TruthValueread-writecurrent
extremeWirelessPortLastChange
OBJECT-TYPE
The value of sysUpTime when the port entered its last state
1.3.6.1.4.1.1916.1.25.2.3.1.6TimeTicksread-onlycurrent
extremeWirelessPortState
OBJECT-TYPE
The current state of the wireless part of this port. enabled : Port is actively looking for wireless interfaces. disabled : Port is administratively unable to detect new interfaces. reset : Interfaces have been detected and are being brought up (access point is booting). addressing : IP Address is being assigned. register : Interfaces are registering for service syncing : Interfaces are retrieving their configuration and updating their state. online : Interfaces are operational. If an error occurs the wireless port will transistion to the error state.
1.3.6.1.4.1.1916.1.25.2.3.1.7INTEGER {disabled(1), enabled(2), reset(3), addressing(4), register(5), syncing(6), online(7), error(8)}read-onlycurrent
extremeWirelessPortAntennaType
OBJECT-TYPE
This is the type of the Antenna for Detachable product. For Altitude-2d series, further selection is available through this variable.
1.3.6.1.4.1.1916.1.25.2.3.1.8ExtremeWirelessAntennaTyperead-writecurrent
extremeWirelessPortAntennaLocation
OBJECT-TYPE
This specifies the location the detachable antenna.
1.3.6.1.4.1.1916.1.25.2.3.1.9ExtremeWirelessAntennaLocationread-writecurrent
extremeWirelessPortBootstrapServerAddressType
OBJECT-TYPE
The type of address specified in the object 'extremeWirelessPortBootstrapServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.25.2.3.1.10InetAddressTyperead-writecurrent
extremeWirelessPortBootstrapServerAddress
OBJECT-TYPE
This specifies the TFTP server address from where the AP gets the Bootstrap Image. This can be a DNS name or an IPv4 address.
1.3.6.1.4.1.1916.1.25.2.3.1.11InetAddress (SIZE(1..255))read-writecurrent
extremeWirelessPortBootstrapFilePath
OBJECT-TYPE
This specifies the TFTP FileName of the AP Bootstrap Image.
1.3.6.1.4.1.1916.1.25.2.3.1.12DisplayStringread-writecurrent
extremeWirelessPortBootLoaderServerAddressType
OBJECT-TYPE
The type of address specified in the object 'extremeWirelessPortBootLoaderServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.25.2.3.1.13InetAddressTyperead-writecurrent
extremeWirelessPortBootLoaderServerAddress
OBJECT-TYPE
This specifies the TFTP server address from where the AP gets the Bootloader Image. This can be a DNS name or an IPv4 address.
1.3.6.1.4.1.1916.1.25.2.3.1.14InetAddress (SIZE(1..255))read-writecurrent
extremeWirelessPortBootLoaderFilePath
OBJECT-TYPE
This specifies the TFTP FileName of the AP Bootloader Image.
1.3.6.1.4.1.1916.1.25.2.3.1.15DisplayStringread-writecurrent
extremeWirelessPortRuntimeServerAddressType
OBJECT-TYPE
The type of address specified in the object 'extremeWirelessPortRuntimeServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
1.3.6.1.4.1.1916.1.25.2.3.1.16InetAddressTyperead-writecurrent
extremeWirelessPortRuntimeServerAddress
OBJECT-TYPE
This specifies the TFTP server address from where the AP gets the Runtime Image. This can be a DNS name or an IPv4 address.
1.3.6.1.4.1.1916.1.25.2.3.1.17InetAddress (SIZE(1..255))read-writecurrent
extremeWirelessPortRuntimeFilePath
OBJECT-TYPE
This specifies the TFTP FileName of the AP Runtime Image.
1.3.6.1.4.1.1916.1.25.2.3.1.18DisplayStringread-writecurrent
extremeWirelessPortMultiBootMode
OBJECT-TYPE
This is used to identify the image with which the AP boots up. This is enumerated as follows: 0 - a300 - This specifies that AP will bootup with Extreme's A300 image 1 - a-bp - This specifies that AP will bootup with Siemen''s Beacon Point Image.
1.3.6.1.4.1.1916.1.25.2.3.1.19INTEGER {a300(0), a-bp(1)}read-writecurrent
extremeAPTraps
OBJECT-IDENTITY
1.3.6.1.4.1.1916.4.5
extremeAPTrapsPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.1916.4.5.0

Notifications

NameOIDStatus
extremeWirelessPortStateChange
NOTIFICATION-TYPE
This trap is generated when a wireless port moves into enabled, disabled or online.
1.3.6.1.4.1.1916.4.5.0.1current
extremeWirelessPortBootFailure
NOTIFICATION-TYPE
This trap is sent by the platform if a wireless port fails to boot too many times.
1.3.6.1.4.1.1916.4.5.0.2current
extremeWirelessClientStationAgedOut
NOTIFICATION-TYPE
This trap is generated when a client is aged out of the table.
1.3.6.1.4.1.1916.4.5.0.3current
extremeWirelessNetloginClientAssociated
NOTIFICATION-TYPE
This trap is generated when a client has associated to an interface that is web based network login enabled.
1.3.6.1.4.1.1916.4.5.0.4current
extremeWirelessAPAdded
NOTIFICATION-TYPE
This is generated when a new AP is added to the scan results table. It will ony be generated if the value of extremeWirelessScanSendAPAddedTrap is true.
1.3.6.1.4.1.1916.4.5.0.5current
extremeWirelessAPRemoved
NOTIFICATION-TYPE
This is generated when an AP is removed from the scan results table. It will ony be generated if the value of extremeWirelessScanSendAPRemovedTrap is true.
1.3.6.1.4.1.1916.4.5.0.6current
extremeWirelessAPUpdated
NOTIFICATION-TYPE
This is generated when the IEs recorded for an AP in the scan results table change. It will only be generated if the value of SendAPUpdatedTrap is true.
1.3.6.1.4.1.1916.4.5.0.7current
extremeWirelessProbeInfoAdded
NOTIFICATION-TYPE
This is generated when a new station is added to the probe info table. It will only be generated if the value of extremeWirelessProbeInfoSendAddedTrap is true.
1.3.6.1.4.1.1916.4.5.0.8current
extremeWirelessProbeInfoRemoved
NOTIFICATION-TYPE
This is generated when a station is removed from the probe info table. It will only be generated if the value of extremeWirelessProbeInfoSendRemovedTrap is true.
1.3.6.1.4.1.1916.4.5.0.9current
extremeWirelessOffChannelScanStarted
NOTIFICATION-TYPE
This is generated when an off-channel scan starts running.
1.3.6.1.4.1.1916.4.5.0.10current
extremeWirelessOffChannelScanFinished
NOTIFICATION-TYPE
This is generated when an off-channel scan finishes running.
1.3.6.1.4.1.1916.4.5.0.11current
extremeWirelessCounterMeasureStarted
NOTIFICATION-TYPE
This trap is generated when counter measures are started on a wireless interface.
1.3.6.1.4.1.1916.4.5.0.12current
extremeWirelessCounterMeasureStopped
NOTIFICATION-TYPE
This trap is generated when counter measures are stopped on a wireless interface.
1.3.6.1.4.1.1916.4.5.0.13current
extremeWirelessInterfaceChannelRescan
NOTIFICATION-TYPE
This trap is generated when a wireless interface tries to autoselect a channel. It indicates whether a particular channel scan was successful, or if it failed then the reason for the failure.
1.3.6.1.4.1.1916.4.5.0.14current