MIBs Depot

EXTREME-POS-MIB

Registered at
1.3.6.1.4.1.1916.1.20
Last updated
1900-07-24 00:00
Organization
Extreme Networks, Inc.
Namespace
extreme
Source file
EXTREME-BASE-MIB
Digest
sha256:920ec3f1c764d83d84c3c0ad6a4d3ca2aa2e105baf75bb47bf910c2a7454dbfc

Description

Extreme POS objects: objects common to POS MIBs

Contact

www.extremenetworks.com

Imports

FromSymbols
EXTREME-BASE-MIBPortList, extremeAgent
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

EXTREME-BASE-MIB
EXTREME-POS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
extremeAps
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.20.1
extremeApsConfig
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.20.1.1
extremeApsConfigEnabled
OBJECT-TYPE
Global APS enablement
1.3.6.1.4.1.1916.1.20.1.1.1TruthValueread-onlycurrent
extremeApsGroupConfigTable
OBJECT-TYPE
This table contains configuration information by defined APS group.
1.3.6.1.4.1.1916.1.20.1.1.2not-accessiblecurrent
extremeApsGroupConfigEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.20.1.1.2.1not-accessiblecurrent
extremeApsGroupConfigGroupNumber
OBJECT-TYPE
The group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.1.2.1.1INTEGER (1..65535)read-onlycurrent
extremeApsGroupConfigRevertMode
OBJECT-TYPE
The revertive mode configured for the APS group. This indicates whether APS will switch-back automatically after the working line error is cleared. In non-revertive mode, manual intervention is required for switch-back.
1.3.6.1.4.1.1916.1.20.1.1.2.1.2INTEGER {revertive(1), nonRevertive(2)}read-onlycurrent
extremeApsGroupConfigRevertMinutes
OBJECT-TYPE
The number of minutes APS will wait after the error has been cleared before switching back to the working line. During this interval, the K1 request will indicate WTR (wait-to-restore). This field is only valid in revertive mode.
1.3.6.1.4.1.1916.1.20.1.1.2.1.3INTEGER (0..12)read-onlycurrent
extremeApsGroupConfigDirection
OBJECT-TYPE
The directional mode configured for the APS group. This indicates whether protection switches are coordinated between both POS equipment and ADM (bidirectional) or not (unidirectional).
1.3.6.1.4.1.1916.1.20.1.1.2.1.4INTEGER {bidirectional(1), unidirectional(2)}read-onlycurrent
extremeApsGroupConfigTimerInterval
OBJECT-TYPE
The number of seconds between APS out-of-band peer protocol hello messages. This value is relevant when the working line and protection line exist is physically different chassis.
1.3.6.1.4.1.1916.1.20.1.1.2.1.5INTEGERread-onlycurrent
extremeApsGroupConfigTimerMisses
OBJECT-TYPE
The number of APS out-of-band peer protocol messages transmitted without receiving a response before the protection switch declares the working switch inoperable. When this occurs the protection switch initiates a line switch over via APS.
1.3.6.1.4.1.1916.1.20.1.1.2.1.6INTEGERread-onlycurrent
extremeApsGroupConfigAuthenticate
OBJECT-TYPE
When enabled, the authentication string on both working and protection switches must match.
1.3.6.1.4.1.1916.1.20.1.1.2.1.7TruthValueread-onlycurrent
extremeApsGroupConfigAuthString
OBJECT-TYPE
If configured, this is the authentication string that must match between working and protection switches. This field is relevant if the APS group is configured to authenticate.
1.3.6.1.4.1.1916.1.20.1.1.2.1.8DisplayString (SIZE(0..8))read-onlycurrent
extremeApsPortConfigTable
OBJECT-TYPE
This table contains configuration information for APS ports.
1.3.6.1.4.1.1916.1.20.1.1.3not-accessiblecurrent
extremeApsPortConfigEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.20.1.1.3.1not-accessiblecurrent
extremeApsPortConfigGroupNumber
OBJECT-TYPE
The group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.1.3.1.1INTEGER (1..65535)read-onlycurrent
extremeApsPortConfigPortNumber
OBJECT-TYPE
The value of ifIndex that identifies the port.
1.3.6.1.4.1.1916.1.20.1.1.3.1.2INTEGERread-onlycurrent
extremeApsPortConfigPortType
OBJECT-TYPE
The port type designation.
1.3.6.1.4.1.1916.1.20.1.1.3.1.3INTEGER {working(1), protection(2)}read-onlycurrent
extremeApsProtectPortConfigTable
OBJECT-TYPE
This table contains configuration information for APS protection ports.
1.3.6.1.4.1.1916.1.20.1.1.4not-accessiblecurrent
extremeApsProtectPortConfigEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.20.1.1.4.1not-accessiblecurrent
extremeApsProtectPortConfigGroupNumber
OBJECT-TYPE
The group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.1.4.1.1INTEGER (1..65535)read-onlycurrent
extremeApsProtectPortConfigPortNumber
OBJECT-TYPE
The value of ifIndex that identifies the protection port.
1.3.6.1.4.1.1916.1.20.1.1.4.1.2INTEGERread-onlycurrent
extremeApsProtectPortConfigWorkingIpAddr
OBJECT-TYPE
The IP address of the working switch. If the working and protection lines reside on the same chassis, this IP address will be a local address.
1.3.6.1.4.1.1916.1.20.1.1.4.1.3IpAddressread-onlycurrent
extremeApsStatus
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.20.1.2
extremeApsGroupTable
OBJECT-TYPE
This table contains run-time information by defined APS group.
1.3.6.1.4.1.1916.1.20.1.2.1not-accessiblecurrent
extremeApsGroupEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.20.1.2.1.1not-accessiblecurrent
extremeApsGroupGroupNumber
OBJECT-TYPE
The group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.2.1.1.1INTEGER (1..65535)read-onlycurrent
extremeApsGroupActivePort
OBJECT-TYPE
The APS port which is currently carrying the network traffic.
1.3.6.1.4.1.1916.1.20.1.2.1.1.2INTEGER {working(1), protection(2)}read-onlycurrent
extremeApsGroupEffectiveDirection
OBJECT-TYPE
The effective directional mode for the APS group. When this value differs from the configured directional mode, check the ADM and switch provisioning for a mis- configuration.
1.3.6.1.4.1.1916.1.20.1.2.1.1.3INTEGER {bidirectional(1), unidirectional(2)}read-onlycurrent
extremeApsGroupPeerProtoStatus
OBJECT-TYPE
The APS out-of-band peer protocol status for a group.
1.3.6.1.4.1.1916.1.20.1.2.1.1.4INTEGER {established(1), closed(2)}read-onlycurrent
extremeApsProtectPortTable
OBJECT-TYPE
This table contains run-time information by defined APS protection port.
1.3.6.1.4.1.1916.1.20.1.2.2not-accessiblecurrent
extremeApsProtectPortEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.20.1.2.2.1not-accessiblecurrent
extremeApsProtectPortGroupNumber
OBJECT-TYPE
The group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.2.2.1.1INTEGER (1..65535)read-onlycurrent
extremeApsProtectPortPortNumber
OBJECT-TYPE
The value of ifIndex that identifies the protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.2INTEGERread-onlycurrent
extremeApsProtectPortTransmitK1
OBJECT-TYPE
The K1 overhead byte currently being transmitted on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.3OCTET STRING (SIZE(1))read-onlycurrent
extremeApsProtectPortTransmitK2
OBJECT-TYPE
The K2 overhead byte currently being transmitted on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.4OCTET STRING (SIZE(1))read-onlycurrent
extremeApsProtectPortReceiveK1
OBJECT-TYPE
The K1 overhead byte currently being received on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.5OCTET STRING (SIZE(1))read-onlycurrent
extremeApsProtectPortReceiveK2
OBJECT-TYPE
The K2 overhead byte currently being received on the indicated protection port.
1.3.6.1.4.1.1916.1.20.1.2.2.1.6OCTET STRING (SIZE(1))read-onlycurrent
extremeApsProtectPortSwitchInitByWorking
OBJECT-TYPE
The number of switches that have been initiated by the working-line router.
1.3.6.1.4.1.1916.1.20.1.2.2.1.7INTEGERread-onlycurrent
extremeApsProtectPortSwitchInitByProtect
OBJECT-TYPE
The number of switches that have been initiated by the protection-line router.
1.3.6.1.4.1.1916.1.20.1.2.2.1.8INTEGERread-onlycurrent
extremeApsProtectPortSwitchInitByADM
OBJECT-TYPE
The number of switches that have been initiated by the ADM.
1.3.6.1.4.1.1916.1.20.1.2.2.1.9INTEGERread-onlycurrent
extremeApsProtectPortSwitchInitByCmd
OBJECT-TYPE
The number of switches that have been initiated by an external CLI command.
1.3.6.1.4.1.1916.1.20.1.2.2.1.10INTEGERread-onlycurrent
extremeApsProtectPortSuccessfulSwitches
OBJECT-TYPE
The number of successful APS line switches.
1.3.6.1.4.1.1916.1.20.1.2.2.1.11INTEGERread-onlycurrent
extremeApsProtectPortHelloProtFails
OBJECT-TYPE
The number of APS out-of-band peer protocol failures recorded. This situation causes the protection-line router to initiate a line switch.
1.3.6.1.4.1.1916.1.20.1.2.2.1.12INTEGERread-onlycurrent
extremeApsErrors
OBJECT-IDENTITY
1.3.6.1.4.1.1916.1.20.1.3
extremeApsLineErrorTable
OBJECT-TYPE
This table contains APS line error information.
1.3.6.1.4.1.1916.1.20.1.3.1not-accessiblecurrent
extremeApsLineErrorEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.20.1.3.1.1not-accessiblecurrent
extremeApsLineErrorGroupNumber
OBJECT-TYPE
The group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.3.1.1.1INTEGER (1..65535)read-onlycurrent
extremeApsLineErrorPortNumber
OBJECT-TYPE
The ifIndex value which identifies the APS port.
1.3.6.1.4.1.1916.1.20.1.3.1.1.2INTEGERread-onlycurrent
extremeApsLineErrorSignalDegradeActive
OBJECT-TYPE
Indicates whether a signal degrade condition currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.3TruthValueread-onlycurrent
extremeApsLineErrorBERSignalDegradeActive
OBJECT-TYPE
Indicates whether a signal degrade condition due to excessive Bit-Error-Rate currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.4TruthValueread-onlycurrent
extremeApsLineErrorSignalFailActive
OBJECT-TYPE
Indicates whether a signal fail condition currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.5TruthValueread-onlycurrent
extremeApsLineErrorBERSignalFailActive
OBJECT-TYPE
Indicates whether a signal fail condition due to excessive Bit-Error-Rate currently exists on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.6TruthValueread-onlycurrent
extremeApsLineErrorSignalDegrades
OBJECT-TYPE
The number of signal degrades that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.7INTEGERread-onlycurrent
extremeApsLineErrorBERSignalDegrades
OBJECT-TYPE
The number of signal degrades due to excessive Bit-Error-Rate that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.8INTEGERread-onlycurrent
extremeApsLineErrorSignalFails
OBJECT-TYPE
The number of signal fails that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.9INTEGERread-onlycurrent
extremeApsLineErrorBERSignalFails
OBJECT-TYPE
The number of signal fails due to excessive Bit-Error-Rate that have been recorded on the line.
1.3.6.1.4.1.1916.1.20.1.3.1.1.10INTEGERread-onlycurrent
extremeApsProtocolErrorTable
OBJECT-TYPE
This table contains APS protocol error information. These errors are relevant for APS protection ports.
1.3.6.1.4.1.1916.1.20.1.3.2not-accessiblecurrent
extremeApsProtocolErrorEntry
OBJECT-TYPE
1.3.6.1.4.1.1916.1.20.1.3.2.1not-accessiblecurrent
extremeApsProtocolErrorGroupNumber
OBJECT-TYPE
The group number which uniquely identifies the APS group.
1.3.6.1.4.1.1916.1.20.1.3.2.1.1INTEGER (1..65535)read-onlycurrent
extremeApsProtocolErrorPortNumber
OBJECT-TYPE
The ifIndex value which identifies the APS protection port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.2INTEGERread-onlycurrent
extremeApsProtocolErrorModeMismatchDefect
OBJECT-TYPE
Indicates whether a Mode Mismatch defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.3TruthValueread-onlycurrent
extremeApsProtocolErrorProtSwitchByteDefect
OBJECT-TYPE
Indicates whether a Protection Switching Byte defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.4TruthValueread-onlycurrent
extremeApsProtocolErrorChannelMismatchDefect
OBJECT-TYPE
Indicates whether a Channel Mismatch defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.5TruthValueread-onlycurrent
extremeApsProtocolErrorFarEndProtectDefect
OBJECT-TYPE
Indicates whether a Far-End Protection defect currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.6TruthValueread-onlycurrent
extremeApsProtocolErrorModeMismatchFailure
OBJECT-TYPE
Indicates whether a Mode Mismatch failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.7TruthValueread-onlycurrent
extremeApsProtocolErrorProtSwitchByteFailure
OBJECT-TYPE
Indicates whether a Protection Switching Byte failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.8TruthValueread-onlycurrent
extremeApsProtocolErrorChannelMismatchFailure
OBJECT-TYPE
Indicates whether a Channel Mismatch failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.9TruthValueread-onlycurrent
extremeApsProtocolErrorFarEndProtectFailure
OBJECT-TYPE
Indicates whether a Far-End Protection failure currently exists on the port.
1.3.6.1.4.1.1916.1.20.1.3.2.1.10TruthValueread-onlycurrent
extremeApsProtocolErrorModeMismatchNumFails
OBJECT-TYPE
The number of Mode Mismatch failures that have been recorded.
1.3.6.1.4.1.1916.1.20.1.3.2.1.11INTEGERread-onlycurrent
extremeApsProtocolErrorProtSwitchByteNumFails
OBJECT-TYPE
The number of Protection Switching Byte failures that have been recorded.
1.3.6.1.4.1.1916.1.20.1.3.2.1.12INTEGERread-onlycurrent
extremeApsProtocolErrorChannelMismatchNumFails
OBJECT-TYPE
The number of Channel Mismatch failures that have been recorded.
1.3.6.1.4.1.1916.1.20.1.3.2.1.13INTEGERread-onlycurrent
extremeApsProtocolErrorFarEndProtectNumFails
OBJECT-TYPE
The number of Far-End Protection failures that have been recorded.
1.3.6.1.4.1.1916.1.20.1.3.2.1.14INTEGERread-onlycurrent