EXTREME-CABLE-MIB
- Registered at
- 1.3.6.1.4.1.1916.1.241.3.6.1.4.1.1916.4.13
- Last updated
- 1900-07-24 00:00
- Organization
- Extreme Networks, Inc.
- Namespace
- extreme
- Source file
EXTREME-BASE-MIB- Digest
sha256:920ec3f1c764d83d84c3c0ad6a4d3ca2aa2e105baf75bb47bf910c2a7454dbfc
Description
Extreme-specific Cable objects
Contact
www.extremenetworks.com
Imports
| From | Symbols |
|---|---|
| EXTREME-BASE-MIB | extremeAgent, extremeV2Traps, extremenetworks |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
EXTREME-BASE-MIB EXTREME-CABLE-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| extremeDiagConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1916.1.24.1 | |||
| extremeDiagConfigTime OBJECT-TYPE Indicates the time at which the Diagnostics information will be collected for the ports which have Auto-Diagnostics configured. Time must be given in hh:mm:ss format where hh, mm and ss are in decimals | 1.3.6.1.4.1.1916.1.24.1.1 | DisplayString (SIZE(16)) | read-write | current |
| extremeDiagConfigRoF OBJECT-TYPE Indicates whether a port should return to INIT state on Diagnostics Failure. If TRUE the port will be restarted even if the Diagnostics indicate a Failure. If FALSE the port will be moved to DIAG_FAIL state | 1.3.6.1.4.1.1916.1.24.1.2 | INTEGER {true(1), false(2)} | read-write | current |
| extremeDiagPortConfigTable OBJECT-TYPE Table, which contains the diagnostic configuration information for the ports | 1.3.6.1.4.1.1916.1.24.2 | not-accessible | current | |
| extremeDiagPortConfigEntry OBJECT-TYPE Each row represents port related diagnostics configuration | 1.3.6.1.4.1.1916.1.24.2.1 | not-accessible | current | |
| extremeDiagPortCfgPortIfIndex OBJECT-TYPE IfIndex of the Port for which the information in this row applies | 1.3.6.1.4.1.1916.1.24.2.1.1 | INTEGER | read-only | current |
| extremeDiagPortCfgMode OBJECT-TYPE The mode of operation. The port can be configured to have either manual diagnostics or auto-diagnostics collected. | 1.3.6.1.4.1.1916.1.24.2.1.2 | INTEGER {auto(1), manual(2)} | read-only | current |
| extremeDiagPortCfgStatus OBJECT-TYPE Specifies whether Diagnostics are enabled or disabled for the port. In the manual mode, enable and disable will disable the corresponding bit in the manual Diag portmask. Once the run command is given the Manual Diagnostics starts running. <diagfail> indicates the diagnostics for the port has failed. <diagfail> is a read-only value and cannot be used for setting the status of the port | 1.3.6.1.4.1.1916.1.24.2.1.3 | INTEGER {enable(1), disable(2), run(3), diagfail(4)} | read-write | current |
| extremeDiagPortDiagTable OBJECT-TYPE Table contains the diagnostic information for the ports | 1.3.6.1.4.1.1916.1.24.3 | not-accessible | current | |
| extremeDiagPortDiagEntry OBJECT-TYPE Each row represents port related diagnostics information | 1.3.6.1.4.1.1916.1.24.3.1 | not-accessible | current | |
| extremeDiagPortDiagPortIfIndex OBJECT-TYPE IfIndex of the Port for which the information in this row applies | 1.3.6.1.4.1.1916.1.24.3.1.1 | INTEGER | read-only | current |
| extremeDiagPortDiagMode OBJECT-TYPE The mode of operation. The port can be configured to have either manual diagnostics or auto-diagnostics collected. | 1.3.6.1.4.1.1916.1.24.3.1.2 | INTEGER {auto(1), manual(2)} | read-only | current |
| extremeDiagPortSpeed OBJECT-TYPE Specifies the speed of the port | 1.3.6.1.4.1.1916.1.24.3.1.3 | INTEGER {speed10(1), speed100(2), speed1000(3), unknown(4)} | read-only | current |
| extremeDiagPortSwapAB OBJECT-TYPE Specifies whether pairA pairB cables are swapped | 1.3.6.1.4.1.1916.1.24.3.1.4 | INTEGER {swap(1), noswap(2), unknown(3)} | read-only | current |
| extremeDiagPortSwapCD OBJECT-TYPE Specifies whether pairC and pairD cables are swapped | 1.3.6.1.4.1.1916.1.24.3.1.5 | INTEGER {swap(1), noswap(2), unknown(3)} | read-only | current |
| extremeDiagPortPairAPol OBJECT-TYPE Specifies the polarity of pairA cables | 1.3.6.1.4.1.1916.1.24.3.1.6 | INTEGER {positive(1), negative(2), unknown(3)} | read-only | current |
| extremeDiagPortPairAFlen OBJECT-TYPE Specifies the distance of Fault in the pairA cables | 1.3.6.1.4.1.1916.1.24.3.1.7 | INTEGER | read-only | current |
| extremeDiagPortPairALen OBJECT-TYPE Specifies the length of the pairA cables | 1.3.6.1.4.1.1916.1.24.3.1.8 | INTEGER | read-only | current |
| extremeDiagPortPairASkew OBJECT-TYPE Skew of pairA cables with respect to the fastest pair | 1.3.6.1.4.1.1916.1.24.3.1.9 | INTEGER | read-only | current |
| extremeDiagPortPairAStatus OBJECT-TYPE Indicates whether pairA cables are properly terminated, short or open | 1.3.6.1.4.1.1916.1.24.3.1.10 | INTEGER {open(1), short(2), terminated(3), imperror(4), unknown(5)} | read-only | current |
| extremeDiagPortPairBPol OBJECT-TYPE Specifies the polarity of pairB cables | 1.3.6.1.4.1.1916.1.24.3.1.11 | INTEGER {positive(1), negative(2), unknown(3)} | read-only | current |
| extremeDiagPortPairBFlen OBJECT-TYPE Specifies the distance of Fault in the pairB cables | 1.3.6.1.4.1.1916.1.24.3.1.12 | INTEGER | read-only | current |
| extremeDiagPortPairBLen OBJECT-TYPE Specifies the length of the pairB cables | 1.3.6.1.4.1.1916.1.24.3.1.13 | INTEGER | read-only | current |
| extremeDiagPortPairBSkew OBJECT-TYPE Skew of pairB cables with respect to the fastest pair | 1.3.6.1.4.1.1916.1.24.3.1.14 | INTEGER | read-only | current |
| extremeDiagPortPairBStatus OBJECT-TYPE Indicates whether pairB cables are properly terminated, short or open | 1.3.6.1.4.1.1916.1.24.3.1.15 | INTEGER {open(1), short(2), terminated(3), imperror(4), unknown(5)} | read-only | current |
| extremeDiagPortPairCPol OBJECT-TYPE Specifies the polarity of pairC cables | 1.3.6.1.4.1.1916.1.24.3.1.16 | INTEGER {positive(1), negative(2), unknown(3)} | read-only | current |
| extremeDiagPortPairCFlen OBJECT-TYPE Specifies the distance of Fault in the pairC cables | 1.3.6.1.4.1.1916.1.24.3.1.17 | INTEGER | read-only | current |
| extremeDiagPortPairCLen OBJECT-TYPE Specifies the length of the pairC cables | 1.3.6.1.4.1.1916.1.24.3.1.18 | INTEGER | read-only | current |
| extremeDiagPortPairCSkew OBJECT-TYPE Skew of pairC cables with respect to the fastest pair | 1.3.6.1.4.1.1916.1.24.3.1.19 | INTEGER | read-only | current |
| extremeDiagPortPairCStatus OBJECT-TYPE Indicates whether pairC cables are properly terminated, short or open | 1.3.6.1.4.1.1916.1.24.3.1.20 | INTEGER {open(1), short(2), terminated(3), imperror(4), unknown(5)} | read-only | current |
| extremeDiagPortPairDPol OBJECT-TYPE Specifies the polarity of pairD cables | 1.3.6.1.4.1.1916.1.24.3.1.21 | INTEGER {positive(1), negative(2), unknown(3)} | read-only | current |
| extremeDiagPortPairDFlen OBJECT-TYPE Specifies the distance of Fault in the pairD cables | 1.3.6.1.4.1.1916.1.24.3.1.22 | INTEGER | read-only | current |
| extremeDiagPortPairDLen OBJECT-TYPE Specifies the length of the pairD cables | 1.3.6.1.4.1.1916.1.24.3.1.23 | INTEGER | read-only | current |
| extremeDiagPortPairDSkew OBJECT-TYPE Skew of pairD cables with respect to the fastest pair | 1.3.6.1.4.1.1916.1.24.3.1.24 | INTEGER | read-only | current |
| extremeDiagPortPairDStatus OBJECT-TYPE Indicates whether pairD cables are properly terminated, short or open | 1.3.6.1.4.1.1916.1.24.3.1.25 | INTEGER {open(1), short(2), terminated(3), imperror(4), unknown(5)} | read-only | current |
| extremeDiagPortDateTime OBJECT-TYPE Date and time at which the Diagnostic information was collected | 1.3.6.1.4.1.1916.1.24.3.1.26 | DisplayString (SIZE(64)) | read-only | current |
| extremeDiagPortStatsTable OBJECT-TYPE Table, which contains the diagnostic statistic information for the ports | 1.3.6.1.4.1.1916.1.24.4 | not-accessible | current | |
| extremeDiagPortStatsEntry OBJECT-TYPE Each row represents port related diagnostics statistics information | 1.3.6.1.4.1.1916.1.24.4.1 | not-accessible | current | |
| extremeDiagPortStatsPortIfIndex OBJECT-TYPE IfIndex of the Port for which the information in this row applies | 1.3.6.1.4.1.1916.1.24.4.1.1 | INTEGER | read-only | current |
| extremeDiagPortStatsNumDiag OBJECT-TYPE Number of times Diagnostics information collected for this port | 1.3.6.1.4.1.1916.1.24.4.1.2 | INTEGER | read-only | current |
| extremeDiagPortStatsNumSuccess OBJECT-TYPE Number of times Diagnostics for this port completed successfully without any errors | 1.3.6.1.4.1.1916.1.24.4.1.3 | INTEGER | read-only | current |
| extremeDiagPortStatsNumFail OBJECT-TYPE Number of times Diagnostics for this port Failed due to errors in the cable pairs | 1.3.6.1.4.1.1916.1.24.4.1.4 | INTEGER | read-only | current |
| extremeDiagPortStatsNumChange OBJECT-TYPE Number of times Diagnostics Changed for this port | 1.3.6.1.4.1.1916.1.24.4.1.5 | INTEGER | read-only | current |
| extremeDiagPortStatsNumAbort OBJECT-TYPE Number of times Diagnostics was aborted by the user for this port | 1.3.6.1.4.1.1916.1.24.4.1.6 | INTEGER | read-only | current |
| extremeCableTraps OBJECT-IDENTITY | 1.3.6.1.4.1.1916.4.13 | |||
| extremeCableTrapsPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.1916.4.13.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| extremeTrapDiagPortDiagnostics NOTIFICATION-TYPE Indicates the status of Diagnostics for a port. The status indicates whether Diagnostics for a particular port failed | 1.3.6.1.4.1.1916.4.13.0.1 | current |