MIBs Depot

ES-RACKTIVITY-MIB

Registered at
1.3.6.1.4.1.34097
Last updated
2014-04-23 03:33
Organization
Racktivity
Revisions
2014-04-23 03:33
Namespace
racktivity
Source file
ES-RACKTIVITY-MIB
Digest
sha256:fd64aab861d0588186bca5b550581c02a67a1e2b67d2c2b917029f96185798d3

Description

The MIB module for the Racktivity Devices

Contact

http://www.racktivity.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ES-RACKTIVITY-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
CURPORTSTATE
TEXTUAL-CONVENTION
enumeration of all port states possible
current
EVENTFLAGS
TEXTUAL-CONVENTION
enumeration of all eventflags possible
current
Shundredth
TEXTUAL-CONVENTION
0.01
current
Stenth
TEXTUAL-CONVENTION
0.1
current
Sthousandth
TEXTUAL-CONVENTION
0.001
current
Uhundredth
TEXTUAL-CONVENTION
0.01
current
Utenth
TEXTUAL-CONVENTION
0.1
current
Uthousandth
TEXTUAL-CONVENTION
0.001
current
Version
TEXTUAL-CONVENTION
Displays a version number
current

Objects

NameOIDSyntaxAccessStatus
racktivity
OBJECT-IDENTITY
1.3.6.1.4.1.34097
racktivityNotif
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.0
esRacktivityConformance
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.2
esRacktivityMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.2.1
esRacktivityMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.2.2
esnModule
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.65
eESNTable
OBJECT-TYPE
Temperature Humidity Presure Airflow Waterleak
1.3.6.1.4.1.34097.9.65.1not-accessiblecurrent
eESNEntry
OBJECT-TYPE
Temperature Humidity Presure Airflow Waterleak
1.3.6.1.4.1.34097.9.65.1.1not-accessiblecurrent
aGeneralModuleStatus
OBJECT-TYPE
General status of a module.
1.3.6.1.4.1.34097.9.65.1.1.1Unsigned32read-onlycurrent
aSpecificModuleStatus
OBJECT-TYPE
Specific status of a module.
1.3.6.1.4.1.34097.9.65.1.1.2Unsigned32read-onlycurrent
aCurrentTime
OBJECT-TYPE
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
1.3.6.1.4.1.34097.9.65.1.1.3TimeTicksread-writecurrent
aVoltage
OBJECT-TYPE
Gets the voltage of a power module. (unit: 0.01V)
1.3.6.1.4.1.34097.9.65.1.1.4Uhundredthread-onlycurrent
aStatePortCur
OBJECT-TYPE
Gets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.
1.3.6.1.4.1.34097.9.65.1.1.8CURPORTSTATEread-onlycurrent
aTemperature
OBJECT-TYPE
Gets the current temperature of a temperature sensor. (unit: 0.1K)
1.3.6.1.4.1.34097.9.65.1.1.11Utenthread-onlycurrent
aHumidity
OBJECT-TYPE
Gets the relative humidity. (unit: 0.1RH)
1.3.6.1.4.1.34097.9.65.1.1.12Utenthread-onlycurrent
aAirflow
OBJECT-TYPE
Gets the current airflow level. (unit: 0.1m/s)
1.3.6.1.4.1.34097.9.65.1.1.23Utenthread-onlycurrent
aDewPoint
OBJECT-TYPE
Gets the current dewpoint. Taking the current humidity into consideration, condensation will occur if the temperature drops below this level. (unit: 0.1K)
1.3.6.1.4.1.34097.9.65.1.1.25Utenth (0..65535)read-onlycurrent
aPressure
OBJECT-TYPE
Gets the atmospheric pressure. (unit: 0.1hPa)
1.3.6.1.4.1.34097.9.65.1.1.26Utenthread-onlycurrent
aAnalogueInput
OBJECT-TYPE
Gets the value of an analog input (voltage). (unit: mV)
1.3.6.1.4.1.34097.9.65.1.1.27Unsigned32read-onlycurrent
aWaterleak
OBJECT-TYPE
Gets the current state of the water leak sensor.
1.3.6.1.4.1.34097.9.65.1.1.28Unsigned32read-onlycurrent
aMotionDetected
OBJECT-TYPE
Gets or resets whether motion has been detected.
1.3.6.1.4.1.34097.9.65.1.1.29Unsigned32read-onlycurrent
aIOPort
OBJECT-TYPE
Gets the state of a digital input.
1.3.6.1.4.1.34097.9.65.1.1.30Unsigned32 (0..1)read-onlycurrent
aHighCurrent
OBJECT-TYPE
The current for high values (unit: 0.1A)
1.3.6.1.4.1.34097.9.65.1.1.41Stenth (-32768..32767)read-onlycurrent
aHighPower
OBJECT-TYPE
The power for high values (unit: 0.01kW)
1.3.6.1.4.1.34097.9.65.1.1.43Shundredth (-32768..32767)read-onlycurrent
aModuleName
OBJECT-TYPE
Gets, sets or defaults the module name.
1.3.6.1.4.1.34097.9.65.1.1.10001DisplayStringread-writecurrent
aFirmwareVersion
OBJECT-TYPE
Gets the version of the module's firmware.
1.3.6.1.4.1.34097.9.65.1.1.10002Versionread-onlycurrent
aHardwareVersion
OBJECT-TYPE
Gets the version of a module's hardware.
1.3.6.1.4.1.34097.9.65.1.1.10003Versionread-onlycurrent
aFirmwareID
OBJECT-TYPE
Gets the ID of the module's firmware.
1.3.6.1.4.1.34097.9.65.1.1.10004DisplayStringread-onlycurrent
aHardwareID
OBJECT-TYPE
Gets the ID of a module's hardware.
1.3.6.1.4.1.34097.9.65.1.1.10005DisplayStringread-onlycurrent
aDisplayTimeOn
OBJECT-TYPE
Gets, sets or defaults the display sleep timer. If the display is inactive for longer than this time, the display turns off to save power. Time is in minutes. (unit: min)
1.3.6.1.4.1.34097.9.65.1.1.10032Unsigned32 (0..255)read-writecurrent
aMaxVoltageWarning
OBJECT-TYPE
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
1.3.6.1.4.1.34097.9.65.1.1.10047Uhundredth (0..65535)read-writecurrent
aMinVoltageWarning
OBJECT-TYPE
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
1.3.6.1.4.1.34097.9.65.1.1.10049Uhundredth (0..65535)read-writecurrent
aMinTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.65.1.1.10052Utenth (2232..4732)read-writecurrent
aMaxTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.65.1.1.10053Utenth (2232..4732)read-writecurrent
aMinHumidityWarning
OBJECT-TYPE
Gets, sets or defaults the minimum relative humidity warning level (use DEF accessor to reset). (unit: 0.1RH)
1.3.6.1.4.1.34097.9.65.1.1.10054Utenth (0..1000)read-writecurrent
aMaxHumidityWarning
OBJECT-TYPE
Gets, sets or defaults the maximum relative humidity warning level (use DEF accessor to reset). (unit: 0.1RH)
1.3.6.1.4.1.34097.9.65.1.1.10055Utenth (0..1000)read-writecurrent
aCurrentWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10078EVENTFLAGSread-writecurrent
aPowerWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the power warning level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10080EVENTFLAGSread-writecurrent
aVoltageWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the voltage warning level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10086EVENTFLAGSread-writecurrent
aTemperatureWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the temperature warning level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10087EVENTFLAGSread-writecurrent
aHumidityWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the humidity warning level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10088EVENTFLAGSread-writecurrent
aDewPointWarning
OBJECT-TYPE
Gets, sets or defaults the dewpoint warning level. If the temperature difference between the current temperature and the dewpoint temperature drops below this value, an event is generated. (unit: 0.1K)
1.3.6.1.4.1.34097.9.65.1.1.10092Utenth (0..65535)read-writecurrent
aDewPointWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the dewpoint warning level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10093EVENTFLAGSread-writecurrent
aDewPointViolationEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the dewpoint temperature is reached.
1.3.6.1.4.1.34097.9.65.1.1.10094EVENTFLAGSread-writecurrent
aPressureWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the atmospheric pressure warning level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10095EVENTFLAGSread-writecurrent
aMinPressureWarning
OBJECT-TYPE
Gets, sets or defaults the minimum atmospheric pressure warning level. (unit: 0.1hPa)
1.3.6.1.4.1.34097.9.65.1.1.10096Utenth (0..65535)read-writecurrent
aMaxPressureWarning
OBJECT-TYPE
Gets, sets or defaults the maximum atmospheric pressure warning level. (unit: 0.1hPa)
1.3.6.1.4.1.34097.9.65.1.1.10097Utenth (0..65535)read-writecurrent
aDisplayBrightness
OBJECT-TYPE
Gets, sets or defaults the display brightness (if supported).
1.3.6.1.4.1.34097.9.65.1.1.10098Unsigned32 (0..255)read-writecurrent
aMotionSensitivity
OBJECT-TYPE
Gets, sets or defaults the sensitivity of a motion sensor.
1.3.6.1.4.1.34097.9.65.1.1.10107Unsigned32 (0..127)read-writecurrent
aExternalSensorLabel
OBJECT-TYPE
Gets, sets or defaults the external sensor label. External sensors can be connected to Energy Sensors.
1.3.6.1.4.1.34097.9.65.1.1.10109DisplayStringread-writecurrent
aRelayLabel
OBJECT-TYPE
Gets, sets or defaults an Energy Sensor relay label.
1.3.6.1.4.1.34097.9.65.1.1.10110DisplayStringread-writecurrent
aMinAnalogueInputWarning
OBJECT-TYPE
Gets, sets or defaults the lower warning level for an analog input. A warning is generated if this level is exceeded. (unit: mV)
1.3.6.1.4.1.34097.9.65.1.1.10111Unsigned32 (0..65535)read-writecurrent
aMaxAnalogueInputWarning
OBJECT-TYPE
Gets, sets or defaults the upper warning level for an analog input. A warning is generated if this level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10112Unsigned32 (0..65535)read-writecurrent
aWaterleakWarning
OBJECT-TYPE
Gets, sets or defaults the water leak detection state (0 = disabled, other values = enabled).
1.3.6.1.4.1.34097.9.65.1.1.10113Unsigned32 (0..65535)read-writecurrent
aMinAirflowWarning
OBJECT-TYPE
Gets, sets or defaults the minimum warning level for an airflow sensor. A warning is generated if this level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10114Unsigned32 (0..65535)read-writecurrent
aMaxAirflowWarning
OBJECT-TYPE
Gets, sets or defaults the maximum warning level for an airflow sensor. A warning is generated if this level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10115Unsigned32 (0..65535)read-writecurrent
aAnalogueInputWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the analog input warning level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10116EVENTFLAGSread-writecurrent
aWaterleakWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if a water leak is detected.
1.3.6.1.4.1.34097.9.65.1.1.10117EVENTFLAGSread-writecurrent
aAirflowWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the airflow warning level is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10118EVENTFLAGSread-writecurrent
aRelayAssertActionEvent
OBJECT-TYPE
Enables or disables the SNMP trap if an Energy Sensor relay is asserted.
1.3.6.1.4.1.34097.9.65.1.1.10119EVENTFLAGSread-writecurrent
aRelayDeassertActionEvent
OBJECT-TYPE
Enables or disables the SNMP trap if an Energy Sensor relay is deasserted.
1.3.6.1.4.1.34097.9.65.1.1.10120EVENTFLAGSread-writecurrent
aMotionWarning
OBJECT-TYPE
Gets, sets or defaults the motion warning threshold.
1.3.6.1.4.1.34097.9.65.1.1.10141Unsigned32 (0..127)read-writecurrent
aMotionWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the motion warning threshold is exceeded.
1.3.6.1.4.1.34097.9.65.1.1.10149EVENTFLAGSread-writecurrent
aDeviceID
OBJECT-TYPE
The ID of the device.
1.3.6.1.4.1.34097.9.65.1.1.10150DisplayStringread-onlycurrent
aDeviceVersion
OBJECT-TYPE
The version of the device.
1.3.6.1.4.1.34097.9.65.1.1.10151Versionread-onlycurrent
aSysName
OBJECT-TYPE
The full name of the device.
1.3.6.1.4.1.34097.9.65.1.1.10152DisplayStringread-onlycurrent
aMaxHighCurrentWarning
OBJECT-TYPE
Gets sets or defaults the maximum high current warning level. (unit: 0.1A)
1.3.6.1.4.1.34097.9.65.1.1.10165Stenth (-32768..32767)read-writecurrent
aMinHighCurrentWarning
OBJECT-TYPE
Gets sets or defaults the minimum high current warning level. (unit: 0.1A)
1.3.6.1.4.1.34097.9.65.1.1.10176Stenth (-32768..32767)read-writecurrent
aMinHighPowerWarning
OBJECT-TYPE
Gets sets or defaults the power min high current warning level. (unit: 0.01kW)
1.3.6.1.4.1.34097.9.65.1.1.10177Shundredth (-32768..32767)read-writecurrent
aMaxHighPowerWarning
OBJECT-TYPE
Gets sets or defaults the power max high current warning level. (unit: 0.01kW)
1.3.6.1.4.1.34097.9.65.1.1.10178Shundredth (-32768..32767)read-writecurrent
aIOPortWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the IO Port change state.
1.3.6.1.4.1.34097.9.65.1.1.10192EVENTFLAGSread-writecurrent
esnIndex
OBJECT-TYPE
Index for the selected ESN Module
1.3.6.1.4.1.34097.9.65.1.1.65537Integer32 (1..8)not-accessiblecurrent
esnModuleIndex
OBJECT-TYPE
Selected ESN Module
1.3.6.1.4.1.34097.9.65.1.1.65538Integer32 (1..8)not-accessiblecurrent
threephasepowerModule
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.66
eThreePhasePowerTable
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.66.1not-accessiblecurrent
eThreePhasePowerEntry
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.66.1.1not-accessiblecurrent
threephasepowerIndex
OBJECT-TYPE
Index for the selected ThreePhasePower Module
1.3.6.1.4.1.34097.9.66.1.1.65537Integer32 (1..8)not-accessiblecurrent
threephasepowerModuleIndex
OBJECT-TYPE
Selected ThreePhasePower Module
1.3.6.1.4.1.34097.9.66.1.1.65538Integer32 (1..8)not-accessiblecurrent
displaymoduleModule
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.68
eDisplayModuleTable
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.68.1not-accessiblecurrent
eDisplayModuleEntry
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.68.1.1not-accessiblecurrent
dGeneralModuleStatus
OBJECT-TYPE
General status of a module.
1.3.6.1.4.1.34097.9.68.1.1.1Unsigned32read-onlycurrent
dSpecificModuleStatus
OBJECT-TYPE
Specific status of a module.
1.3.6.1.4.1.34097.9.68.1.1.2Unsigned32read-onlycurrent
dCurrentTime
OBJECT-TYPE
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
1.3.6.1.4.1.34097.9.68.1.1.3TimeTicksread-writecurrent
dTemperature
OBJECT-TYPE
Gets the current temperature of a temperature sensor. (unit: 0.1K)
1.3.6.1.4.1.34097.9.68.1.1.11Utenthread-onlycurrent
dTimeOnline
OBJECT-TYPE
Gets the amount of seconds since the last reset. (unit: s)
1.3.6.1.4.1.34097.9.68.1.1.24Unsigned32read-onlycurrent
dModuleName
OBJECT-TYPE
Gets, sets or defaults the module name.
1.3.6.1.4.1.34097.9.68.1.1.10001DisplayStringread-writecurrent
dFirmwareVersion
OBJECT-TYPE
Gets the version of the module's firmware.
1.3.6.1.4.1.34097.9.68.1.1.10002Versionread-onlycurrent
dHardwareVersion
OBJECT-TYPE
Gets the version of a module's hardware.
1.3.6.1.4.1.34097.9.68.1.1.10003Versionread-onlycurrent
dFirmwareID
OBJECT-TYPE
Gets the ID of the module's firmware.
1.3.6.1.4.1.34097.9.68.1.1.10004DisplayStringread-onlycurrent
dHardwareID
OBJECT-TYPE
Gets the ID of a module's hardware.
1.3.6.1.4.1.34097.9.68.1.1.10005DisplayStringread-onlycurrent
dMinTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.68.1.1.10052Utenth (2232..4732)read-writecurrent
dMaxTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.68.1.1.10053Utenth (2232..4732)read-writecurrent
dDisplayAllDevices
OBJECT-TYPE
If a display need to show all devices or just a small list
1.3.6.1.4.1.34097.9.68.1.1.10237Unsigned32 (0..1)read-writecurrent
displaymoduleIndex
OBJECT-TYPE
Index for the selected DisplayModule Module
1.3.6.1.4.1.34097.9.68.1.1.65537Integer32 (1..8)not-accessiblecurrent
displaymoduleModuleIndex
OBJECT-TYPE
Selected DisplayModule Module
1.3.6.1.4.1.34097.9.68.1.1.65538Integer32 (1..8)not-accessiblecurrent
energymonitorModule
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.69
eEnergyMonitorTable
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.69.1not-accessiblecurrent
eEnergyMonitorEntry
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.69.1.1not-accessiblecurrent
eGeneralModuleStatus
OBJECT-TYPE
General status of a module.
1.3.6.1.4.1.34097.9.69.1.1.1Unsigned32read-onlycurrent
eSpecificModuleStatus
OBJECT-TYPE
Specific status of a module.
1.3.6.1.4.1.34097.9.69.1.1.2Unsigned32read-onlycurrent
eCurrentTime
OBJECT-TYPE
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
1.3.6.1.4.1.34097.9.69.1.1.3TimeTicksread-writecurrent
eVoltage
OBJECT-TYPE
Gets the voltage of a power module. (unit: 0.01V)
1.3.6.1.4.1.34097.9.69.1.1.4Uhundredthread-onlycurrent
eFrequency
OBJECT-TYPE
Gets the frequency of the input voltage of a power module. (unit: 0.001Hz)
1.3.6.1.4.1.34097.9.69.1.1.5Uthousandthread-onlycurrent
eCurrent
OBJECT-TYPE
Gets the current of an outlet. (unit: 0.001A)
1.3.6.1.4.1.34097.9.69.1.1.6Uthousandthread-onlycurrent
ePower
OBJECT-TYPE
Gets the power of an outlet. (unit: W)
1.3.6.1.4.1.34097.9.69.1.1.7Unsigned32read-onlycurrent
eActiveEnergy
OBJECT-TYPE
Gets the energy used by an outlet. (unit: 0.001kWh)
1.3.6.1.4.1.34097.9.69.1.1.9Uthousandthread-onlycurrent
eApparentEnergy
OBJECT-TYPE
Gets the apparent energy used by an outlet. (unit: 0.001kVAh)
1.3.6.1.4.1.34097.9.69.1.1.10Uthousandthread-onlycurrent
eTemperature
OBJECT-TYPE
Gets the current temperature of a temperature sensor. (unit: 0.1K)
1.3.6.1.4.1.34097.9.69.1.1.11Utenthread-onlycurrent
eApparentPower
OBJECT-TYPE
Gets the apparent power of an outlet. (unit: VA)
1.3.6.1.4.1.34097.9.69.1.1.15Unsigned32read-onlycurrent
ePowerFactor
OBJECT-TYPE
Gets the power factor of an outlet. (unit: %)
1.3.6.1.4.1.34097.9.69.1.1.16Unsigned32read-onlycurrent
eTotalCurrent
OBJECT-TYPE
Gets the total current of a power module. (unit: 0.001A)
1.3.6.1.4.1.34097.9.69.1.1.17Uthousandthread-onlycurrent
eTotalRealPower
OBJECT-TYPE
Gets the total power level of a power module. (unit: W)
1.3.6.1.4.1.34097.9.69.1.1.18Unsigned32read-onlycurrent
eTotalApparentPower
OBJECT-TYPE
Gets the total apparent power of a power module. (unit: VA)
1.3.6.1.4.1.34097.9.69.1.1.19Unsigned32read-onlycurrent
eTotalActiveEnergy
OBJECT-TYPE
Gets the total energy of a power module. (unit: 0.001kWh)
1.3.6.1.4.1.34097.9.69.1.1.20Uthousandthread-onlycurrent
eTotalApparentEnergy
OBJECT-TYPE
Gets the total apparent energy of a power module. (unit: 0.001kVAh)
1.3.6.1.4.1.34097.9.69.1.1.21Uthousandthread-onlycurrent
eTotalPowerFactor
OBJECT-TYPE
Gets the total power factor of a power module. (unit: %)
1.3.6.1.4.1.34097.9.69.1.1.22Unsigned32read-onlycurrent
eTimeOnline
OBJECT-TYPE
Gets the amount of seconds since the last reset. (unit: s)
1.3.6.1.4.1.34097.9.69.1.1.24Unsigned32read-onlycurrent
eTotalHarmonicDistortion
OBJECT-TYPE
total harmonic distortion - outlet (unit: 0.1%)
1.3.6.1.4.1.34097.9.69.1.1.50Utenth (0..1000)read-onlycurrent
eModuleName
OBJECT-TYPE
Gets, sets or defaults the module name.
1.3.6.1.4.1.34097.9.69.1.1.10001DisplayStringread-writecurrent
eFirmwareVersion
OBJECT-TYPE
Gets the version of the module's firmware.
1.3.6.1.4.1.34097.9.69.1.1.10002Versionread-onlycurrent
eHardwareVersion
OBJECT-TYPE
Gets the version of a module's hardware.
1.3.6.1.4.1.34097.9.69.1.1.10003Versionread-onlycurrent
eFirmwareID
OBJECT-TYPE
Gets the ID of the module's firmware.
1.3.6.1.4.1.34097.9.69.1.1.10004DisplayStringread-onlycurrent
eHardwareID
OBJECT-TYPE
Gets the ID of a module's hardware.
1.3.6.1.4.1.34097.9.69.1.1.10005DisplayStringread-onlycurrent
eMaxCurrentWarning
OBJECT-TYPE
Gets, sets or defaults the maximum current warning level of an outlet. (unit: 0.001A)
1.3.6.1.4.1.34097.9.69.1.1.10039Uthousandth (100..8000)read-writecurrent
eMaxPowerWarning
OBJECT-TYPE
Gets, sets or defaults the maximum power warning level of an outlet. (unit: W)
1.3.6.1.4.1.34097.9.69.1.1.10041Unsigned32 (20..2000)read-writecurrent
eMaxTotalCurrentWarning
OBJECT-TYPE
Gets, sets or defaults the total maximum current warning level of a power module. (unit: 0.001A)
1.3.6.1.4.1.34097.9.69.1.1.10043Uthousandth (100..16000)read-writecurrent
eMaxTotalPowerWarning
OBJECT-TYPE
Gets, sets or defaults the maximum total power warning level. (unit: W)
1.3.6.1.4.1.34097.9.69.1.1.10045Unsigned32 (20..4000)read-writecurrent
eMaxVoltageWarning
OBJECT-TYPE
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
1.3.6.1.4.1.34097.9.69.1.1.10047Uhundredth (5000..30000)read-writecurrent
eMinVoltageWarning
OBJECT-TYPE
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
1.3.6.1.4.1.34097.9.69.1.1.10049Uhundredth (5000..30000)read-writecurrent
eMinTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.69.1.1.10052Utenth (2232..4732)read-writecurrent
eMaxTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.69.1.1.10053Utenth (2232..4732)read-writecurrent
eCurrentWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
1.3.6.1.4.1.34097.9.69.1.1.10078EVENTFLAGSread-writecurrent
ePowerWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the power warning level is exceeded.
1.3.6.1.4.1.34097.9.69.1.1.10080EVENTFLAGSread-writecurrent
eTotalCurrentWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the total outlet current warning level is exceeded.
1.3.6.1.4.1.34097.9.69.1.1.10082EVENTFLAGSread-writecurrent
eTotalPowerWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the total power warning level is exceeded.
1.3.6.1.4.1.34097.9.69.1.1.10084EVENTFLAGSread-writecurrent
eVoltageWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the voltage warning level is exceeded.
1.3.6.1.4.1.34097.9.69.1.1.10086EVENTFLAGSread-writecurrent
eTemperatureWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the temperature warning level is exceeded.
1.3.6.1.4.1.34097.9.69.1.1.10087EVENTFLAGSread-writecurrent
eMicroIntTimeThreshold
OBJECT-TYPE
The minimum time the voltage must be interrupted before it is seen as a micro interruption (unit: 0.1ms)
1.3.6.1.4.1.34097.9.69.1.1.10135Utenth (10..65535)read-writecurrent
eMicroIntEvent
OBJECT-TYPE
Enables or disables the SNMP trap if a microinterruption on the voltage is detected.
1.3.6.1.4.1.34097.9.69.1.1.10136EVENTFLAGSread-writecurrent
energymonitorIndex
OBJECT-TYPE
Index for the selected EnergyMonitor Module
1.3.6.1.4.1.34097.9.69.1.1.65537Integer32 (1..8)not-accessiblecurrent
energymonitorModuleIndex
OBJECT-TYPE
Selected EnergyMonitor Module
1.3.6.1.4.1.34097.9.69.1.1.65538Integer32 (1..8)not-accessiblecurrent
masterModule
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.77
eMasterTable
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.77.1not-accessiblecurrent
eMasterEntry
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.77.1.1not-accessiblecurrent
mGeneralModuleStatus
OBJECT-TYPE
General status of a module.
1.3.6.1.4.1.34097.9.77.1.1.1Unsigned32read-onlycurrent
mSpecificModuleStatus
OBJECT-TYPE
Specific status of a module.
1.3.6.1.4.1.34097.9.77.1.1.2Unsigned32read-onlycurrent
mCurrentTime
OBJECT-TYPE
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
1.3.6.1.4.1.34097.9.77.1.1.3TimeTicksread-writecurrent
mVoltage
OBJECT-TYPE
Gets the voltage of a power module. (unit: 0.01V)
1.3.6.1.4.1.34097.9.77.1.1.4Uhundredthread-onlycurrent
mTemperature
OBJECT-TYPE
Gets the current temperature of a temperature sensor. (unit: 0.1K)
1.3.6.1.4.1.34097.9.77.1.1.11Utenthread-onlycurrent
mCurrentIP
OBJECT-TYPE
Gets the current IP address. To set the IP address, use IPADDR instead.
1.3.6.1.4.1.34097.9.77.1.1.14IpAddressread-onlycurrent
mTotalCurrent
OBJECT-TYPE
Gets the total current of a power module. (unit: 0.001A)
1.3.6.1.4.1.34097.9.77.1.1.17Uthousandthread-onlycurrent
mTotalRealPower
OBJECT-TYPE
Gets the total power level of a power module. (unit: W)
1.3.6.1.4.1.34097.9.77.1.1.18Unsigned32read-onlycurrent
mTotalActiveEnergy
OBJECT-TYPE
Gets the total energy of a power module. (unit: 0.001kWh)
1.3.6.1.4.1.34097.9.77.1.1.20Uthousandthread-onlycurrent
mLineCurrent
OBJECT-TYPE
Gets the current line current. (unit: 0.001A)
1.3.6.1.4.1.34097.9.77.1.1.32Uthousandth (0..65535)read-onlycurrent
mFuseCurrent
OBJECT-TYPE
Gets the current through a fuse. (unit: 0.001A)
1.3.6.1.4.1.34097.9.77.1.1.33Uthousandth (0..65535)read-onlycurrent
mCurrentSubNetMask
OBJECT-TYPE
Gets the current subnet mask. To set the subnet mask use SNMSK instead.
1.3.6.1.4.1.34097.9.77.1.1.34IpAddressread-onlycurrent
mCurrentDNSServer
OBJECT-TYPE
Gets the current DNS server. To set the DNS server use DNSSRV instead.
1.3.6.1.4.1.34097.9.77.1.1.35IpAddressread-onlycurrent
mCurrentStdGateway
OBJECT-TYPE
Gets the current standard gateway. To set the standard gateway use STDGW instead.
1.3.6.1.4.1.34097.9.77.1.1.36IpAddressread-onlycurrent
mUPSPresent
OBJECT-TYPE
Checks if a UPS is present.
1.3.6.1.4.1.34097.9.77.1.1.37Unsigned32 (0..1)read-onlycurrent
mUPSStatus
OBJECT-TYPE
Gets the working status of a UPS (if its working on its batteries or not).
1.3.6.1.4.1.34097.9.77.1.1.38Unsigned32read-onlycurrent
mUPSEstimatedRunTime
OBJECT-TYPE
Gets the estimated run time of a UPS. (unit: min)
1.3.6.1.4.1.34097.9.77.1.1.39Unsigned32 (0..65535)read-onlycurrent
mUPSBatteryLevel
OBJECT-TYPE
The current UPS battery level. (unit: 0.1%)
1.3.6.1.4.1.34097.9.77.1.1.40Utenth (0..1000)read-onlycurrent
mHighCurrent
OBJECT-TYPE
The current for high values (unit: 0.1A)
1.3.6.1.4.1.34097.9.77.1.1.41Stenthread-onlycurrent
mUpsCommunicationStatus
OBJECT-TYPE
Status information of communication with the UPS
1.3.6.1.4.1.34097.9.77.1.1.42Unsigned32 (0..1)read-onlycurrent
mHighPower
OBJECT-TYPE
The power for high values (unit: 0.01kW)
1.3.6.1.4.1.34097.9.77.1.1.43Shundredth (-32768..32767)read-onlycurrent
mTotalHighCurrent
OBJECT-TYPE
The current for high values (unit: 0.1A)
1.3.6.1.4.1.34097.9.77.1.1.44Stenth (0..65535)read-onlycurrent
mTotalHighPower
OBJECT-TYPE
The power for high values (unit: 0.01kW)
1.3.6.1.4.1.34097.9.77.1.1.45Shundredth (-32768..32767)read-onlycurrent
mPositiveEnergy
OBJECT-TYPE
Gets the positive energy used by an outlet. (unit: 0.001kWh)
1.3.6.1.4.1.34097.9.77.1.1.46Uthousandth (0..4294967295)read-onlycurrent
mNegativeEnergy
OBJECT-TYPE
Gets the negative energy used by an outlet. (unit: 0.001kWh)
1.3.6.1.4.1.34097.9.77.1.1.47Uthousandth (0..4294967295)read-onlycurrent
mTotalPositiveEnergy
OBJECT-TYPE
Gets the positive energy of the module. (unit: 0.001kWh)
1.3.6.1.4.1.34097.9.77.1.1.48Uthousandth (0..4294967295)read-onlycurrent
mTotalNegativeEnergy
OBJECT-TYPE
Gets the negative energy of the module. (unit: 0.001kWh)
1.3.6.1.4.1.34097.9.77.1.1.49Uthousandth (0..4294967295)read-onlycurrent
mCloudStatus
OBJECT-TYPE
Gets the status of the connection with the cloud. 0 = Idle state; 1 = Disabled; 2 = Initialising; 3 = Initialising - No connection; 4 = Initialising - No key; 5 = Connection Ok; 6 = Connection Failed; 7 = Connection Failed - No key.
1.3.6.1.4.1.34097.9.77.1.1.56Unsigned32 (0..255)read-onlycurrent
mStatus
OBJECT-TYPE
status of a module
1.3.6.1.4.1.34097.9.77.1.1.1000Unsigned32 (0..65535)read-onlycurrent
mModuleName
OBJECT-TYPE
Gets, sets or defaults the module name.
1.3.6.1.4.1.34097.9.77.1.1.10001DisplayStringread-writecurrent
mFirmwareVersion
OBJECT-TYPE
Gets the version of the module's firmware.
1.3.6.1.4.1.34097.9.77.1.1.10002Versionread-onlycurrent
mHardwareVersion
OBJECT-TYPE
Gets the version of a module's hardware.
1.3.6.1.4.1.34097.9.77.1.1.10003Versionread-onlycurrent
mFirmwareID
OBJECT-TYPE
Gets the ID of the module's firmware.
1.3.6.1.4.1.34097.9.77.1.1.10004DisplayStringread-onlycurrent
mHardwareID
OBJECT-TYPE
Gets the ID of a module's hardware.
1.3.6.1.4.1.34097.9.77.1.1.10005DisplayStringread-onlycurrent
mRackName
OBJECT-TYPE
Gets, sets or defaults the name of the rack.
1.3.6.1.4.1.34097.9.77.1.1.10006DisplayStringread-writecurrent
mRackPosition
OBJECT-TYPE
Gets, sets or defaults the position in the rack.
1.3.6.1.4.1.34097.9.77.1.1.10007DisplayStringread-writecurrent
mIPAddress
OBJECT-TYPE
Gets, sets or defaults the IP address (when DHCP is disabled).
1.3.6.1.4.1.34097.9.77.1.1.10011IpAddressread-writecurrent
mSubNetMask
OBJECT-TYPE
Gets, sets or defaults the subnet mask (when DHCP is disabled).
1.3.6.1.4.1.34097.9.77.1.1.10012IpAddressread-writecurrent
mStdGateWay
OBJECT-TYPE
Gets, sets or defaults the standard gateway (when DHCP is disabled).
1.3.6.1.4.1.34097.9.77.1.1.10013IpAddressread-writecurrent
mDnsServer
OBJECT-TYPE
Gets, sets or defaults the IP address of the used DNS server (when DHCP is disabled).
1.3.6.1.4.1.34097.9.77.1.1.10014IpAddressread-writecurrent
mMAC
OBJECT-TYPE
Gets the MAC address of a master module.
1.3.6.1.4.1.34097.9.77.1.1.10015MacAddressread-onlycurrent
mDHCPEnable
OBJECT-TYPE
Enables, disables or defaults DHCP. Set to 1 to enable DHCP, or 0 to disable DHCP.
1.3.6.1.4.1.34097.9.77.1.1.10016Unsigned32 (0..1)read-writecurrent
mNTPServer
OBJECT-TYPE
Gets, sets or defaults the NTP (Network Time Protocol) server IP address.
1.3.6.1.4.1.34097.9.77.1.1.10017IpAddressread-writecurrent
mUseDefaultNTPServer
OBJECT-TYPE
Enables, disables or defaults the usage of the default NTP (Network Time Protocol) server (pool.ntp.org).
1.3.6.1.4.1.34097.9.77.1.1.10018Unsigned32 (0..1)read-writecurrent
mUseNTP
OBJECT-TYPE
Enables, disables or defaults NTP (Network Time Protocol). Set to 1 to enable NTP, or 0 to disable NTP.
1.3.6.1.4.1.34097.9.77.1.1.10019Unsigned32 (0..1)read-writecurrent
mSNMPTrapRecvIP
OBJECT-TYPE
Gets, sets or defaults the SNMP trap receiver IP address.
1.3.6.1.4.1.34097.9.77.1.1.10020IpAddressread-writecurrent
mSNMPTrapRecvPort
OBJECT-TYPE
Gets, sets or defaults the SNMP tap receiver port.
1.3.6.1.4.1.34097.9.77.1.1.10021Unsigned32 (0..65535)read-writecurrent
mSNMPControl
OBJECT-TYPE
Enables, disables or defaults write access over SNMP. Set to 1 to disable write access, or 0 to enable write access.
1.3.6.1.4.1.34097.9.77.1.1.10024Unsigned32 (0..1)read-writecurrent
mECSServer
OBJECT-TYPE
Gets, sets or defaults the ECS (Energy Cloud Sentinel) server IP address.
1.3.6.1.4.1.34097.9.77.1.1.10028IpAddressread-writecurrent
mUseECSServer
OBJECT-TYPE
Enables, disables or defaults the use of an ECS (Energy Cloud Sentinel) server. Set to 1 to enable or 0 to disable.
1.3.6.1.4.1.34097.9.77.1.1.10029Unsigned32 (0..1)read-writecurrent
mDisplayLock
OBJECT-TYPE
Gets, sets or defaults the display lock. If the display is locked, you can still view information on the display, but you are not allowed to change settings through the menu system.
1.3.6.1.4.1.34097.9.77.1.1.10031Unsigned32 (0..255)read-writecurrent
mDisplayTimeOn
OBJECT-TYPE
Gets, sets or defaults the display sleep timer. If the display is inactive for longer than this time, the display turns off to save power. Time is in minutes. (unit: min)
1.3.6.1.4.1.34097.9.77.1.1.10032Unsigned32 (0..255)read-writecurrent
mMaxVoltageWarning
OBJECT-TYPE
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
1.3.6.1.4.1.34097.9.77.1.1.10047Uhundredth (0..65535)read-writecurrent
mMinVoltageWarning
OBJECT-TYPE
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
1.3.6.1.4.1.34097.9.77.1.1.10049Uhundredth (0..65535)read-writecurrent
mMinTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.77.1.1.10052Utenth (2232..4732)read-writecurrent
mMaxTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.77.1.1.10053Utenth (2232..4732)read-writecurrent
mGeneralEventEnable
OBJECT-TYPE
Gets, sets or defaults general events. If set to 0, no events will be generated. Set to 1 to generate events on media indicated by the event bitfields.
1.3.6.1.4.1.34097.9.77.1.1.10074EVENTFLAGSread-writecurrent
mSNMPSysContact
OBJECT-TYPE
Gets, sets or defaults the SNMP contact information.
1.3.6.1.4.1.34097.9.77.1.1.10075DisplayStringread-writecurrent
mCurrentWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
1.3.6.1.4.1.34097.9.77.1.1.10078EVENTFLAGSread-writecurrent
mPowerWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the power warning level is exceeded.
1.3.6.1.4.1.34097.9.77.1.1.10080EVENTFLAGSread-writecurrent
mTotalCurrentWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the total outlet current warning level is exceeded.
1.3.6.1.4.1.34097.9.77.1.1.10082EVENTFLAGSread-writecurrent
mTotalPowerWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the total power warning level is exceeded.
1.3.6.1.4.1.34097.9.77.1.1.10084EVENTFLAGSread-writecurrent
mVoltageWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the voltage warning level is exceeded.
1.3.6.1.4.1.34097.9.77.1.1.10086EVENTFLAGSread-writecurrent
mTemperatureWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the temperature warning level is exceeded.
1.3.6.1.4.1.34097.9.77.1.1.10087EVENTFLAGSread-writecurrent
mDisplayBrightness
OBJECT-TYPE
Gets, sets or defaults the display brightness (if supported).
1.3.6.1.4.1.34097.9.77.1.1.10098Unsigned32 (0..255)read-writecurrent
mECSServerPort
OBJECT-TYPE
Gets, sets or defaults the ECS (Energy Cloud Sentinel) server port.
1.3.6.1.4.1.34097.9.77.1.1.10106Unsigned32 (0..65535)read-writecurrent
mExternalSensorLabel
OBJECT-TYPE
Gets, sets or defaults the external sensor label. External sensors can be connected to Energy Sensors.
1.3.6.1.4.1.34097.9.77.1.1.10109DisplayStringread-writecurrent
mHttpsOnly
OBJECT-TYPE
Enables or disables the use of HTTPS (secure HTTP). Set to 1 to enable HTTPS only, or 0 to also enable HTTP.
1.3.6.1.4.1.34097.9.77.1.1.10127Unsigned32 (0..1)read-writecurrent
mTelnetSsl
OBJECT-TYPE
Enables or disables the use of Telnet SSL (secure Telnet). Set to 1 to enable Telnet SSL, or 0 to disable Telnet SSL).
1.3.6.1.4.1.34097.9.77.1.1.10128Unsigned32 (0..1)read-writecurrent
mCookieTimeToLive
OBJECT-TYPE
The TTL (Time To Live) of the website cookie. (unit: min)
1.3.6.1.4.1.34097.9.77.1.1.10130Unsigned32 (0..65535)read-writecurrent
mLineCurrentWarningThreshold
OBJECT-TYPE
Gets, sets the warning threshold of the linecurrent. (unit: 0.001A)
1.3.6.1.4.1.34097.9.77.1.1.10131Uthousandth (0..65535)read-writecurrent
mLineCurrentOffThreshold
OBJECT-TYPE
Gets, sets the off threshold of the linecurrent. (unit: 0.001A)
1.3.6.1.4.1.34097.9.77.1.1.10132Uthousandth (0..65535)read-writecurrent
mLineCurrentWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the linecurrent warning level is exceeded.
1.3.6.1.4.1.34097.9.77.1.1.10133EVENTFLAGSread-writecurrent
mLineCurrentOffEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the linecurrent off level is exceeded.
1.3.6.1.4.1.34097.9.77.1.1.10134EVENTFLAGSread-writecurrent
mFuseCurrentWarningThreshold
OBJECT-TYPE
Gets, sets or defaults the maximum current warning threshold per fuse. (unit: 0.001A)
1.3.6.1.4.1.34097.9.77.1.1.10142Uthousandth (0..32000)read-writecurrent
mFuseCurrentOffThreshold
OBJECT-TYPE
Gets, sets or defaults the maximum current off threshold per fuse. (unit: 0.001A)
1.3.6.1.4.1.34097.9.77.1.1.10143Uthousandth (0..32000)read-writecurrent
mFuseCurrentWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the fusecurrent warning threshold is exceeded.
1.3.6.1.4.1.34097.9.77.1.1.10144EVENTFLAGSread-writecurrent
mFuseCurrentOffEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the fusecurrent off threshold is exceeded.
1.3.6.1.4.1.34097.9.77.1.1.10145EVENTFLAGSread-writecurrent
mDeviceID
OBJECT-TYPE
The ID of the device.
1.3.6.1.4.1.34097.9.77.1.1.10150DisplayStringread-onlycurrent
mDeviceVersion
OBJECT-TYPE
The version of the device.
1.3.6.1.4.1.34097.9.77.1.1.10151Versionread-onlycurrent
mSysName
OBJECT-TYPE
The full name of the device.
1.3.6.1.4.1.34097.9.77.1.1.10152DisplayStringread-onlycurrent
mElectricalTopology
OBJECT-TYPE
Gets the electrical topology of the unit.
1.3.6.1.4.1.34097.9.77.1.1.10153Unsigned32 (0..2)read-onlycurrent
mFusePortTopology
OBJECT-TYPE
Gets the topology between the outlets and fuses.
1.3.6.1.4.1.34097.9.77.1.1.10154Unsigned32 (0..6)read-onlycurrent
mLineFuseTopology
OBJECT-TYPE
Gets the topology between the inlet (cable or connection) and the fuses.
1.3.6.1.4.1.34097.9.77.1.1.10155Unsigned32 (0..3)read-onlycurrent
mSSOIPAddress
OBJECT-TYPE
Gets, sets the IP address of an SSO (Smart Style Office).
1.3.6.1.4.1.34097.9.77.1.1.10156IpAddressread-writecurrent
mSSOLoginCredentials
OBJECT-TYPE
Gets, sets the login credentials of an SSO (Smart Style Office).
1.3.6.1.4.1.34097.9.77.1.1.10157DisplayStringread-writecurrent
mSSOGracefullShutdown
OBJECT-TYPE
Gets, sets the string to send if the UPS' battery level is below the set threshold.
1.3.6.1.4.1.34097.9.77.1.1.10158DisplayStringread-writecurrent
mUPSWarningLevel
OBJECT-TYPE
Gets, sets or defaults the graceful shutdown threshold of a UPS.
1.3.6.1.4.1.34097.9.77.1.1.10159Utenth (0..1000)read-writecurrent
mUPSOffLevel
OBJECT-TYPE
Gets, sets or defaults the threshold of a UPS to set outlets off.
1.3.6.1.4.1.34097.9.77.1.1.10160Utenth (0..1000)read-writecurrent
mMaxHighCurrentWarning
OBJECT-TYPE
Gets sets or defaults the maximum high current warning level. (unit: 0.1A)
1.3.6.1.4.1.34097.9.77.1.1.10165Stenth (-32768..32767)read-writecurrent
mUpsMonitoringProtocol
OBJECT-TYPE
Disables/Enables UPS monitoring and selects the protocol used for UPS monitoring. 0 = Disabled; 1 = Use old APC protocol
1.3.6.1.4.1.34097.9.77.1.1.10167Unsigned32 (0..1)read-writecurrent
mUpsEmergencyThreshold
OBJECT-TYPE
When the UPS battery level goes below this threshold a shutdown request will be sent to all agents (unit: 0.1%)
1.3.6.1.4.1.34097.9.77.1.1.10168Utenth (0..1000)read-writecurrent
mUpsRecoveryThreshold
OBJECT-TYPE
When the UPS battery level goes above this threshold a outlets will be powered on as configured by the user (unit: 0.1%)
1.3.6.1.4.1.34097.9.77.1.1.10169Utenth (0..1000)read-writecurrent
mUpsEventFlags
OBJECT-TYPE
Event flags for events related to the UPS monitoring
1.3.6.1.4.1.34097.9.77.1.1.10170EVENTFLAGSread-writecurrent
mRecoveryPowerThreshold
OBJECT-TYPE
When the UPS was on battery and it went below UPSEMERGTHRES, the outlets that have a load below the RECOVPOWERTHRES will be power cycled once the UPS is back on mains power and exceeds UPSRECOVTHRES (unit: W)
1.3.6.1.4.1.34097.9.77.1.1.10171Unsigned32 (20..4000)read-writecurrent
mMinHighCurrentWarning
OBJECT-TYPE
Gets sets or defaults the minimum high current warning level. (unit: 0.1A)
1.3.6.1.4.1.34097.9.77.1.1.10176Stenth (-32768..32767)read-writecurrent
mMinHighPowerWarning
OBJECT-TYPE
Gets sets or defaults the power min high current warning level. (unit: 0.01kW)
1.3.6.1.4.1.34097.9.77.1.1.10177Shundredth (-32768..32767)read-writecurrent
mMaxHighPowerWarning
OBJECT-TYPE
Gets sets or defaults the power max high current warning level. (unit: 0.01kW)
1.3.6.1.4.1.34097.9.77.1.1.10178Shundredth (-32768..32767)read-writecurrent
mHeartbeatInterval
OBJECT-TYPE
Interval (in seconds) between 2 heartbeat SNMP traps, Set to 0 to disable (unit: s)
1.3.6.1.4.1.34097.9.77.1.1.10179Unsigned32 (0..255)read-writecurrent
mMinTotalHighCurrentWarning
OBJECT-TYPE
Gets sets or defaults the maximum high current warning level. (unit: 0.1A)
1.3.6.1.4.1.34097.9.77.1.1.10180Stenth (-32768..32767)read-writecurrent
mMaxTotalHighCurrentWarning
OBJECT-TYPE
Gets sets or defaults the maximum high current warning level. (unit: 0.1A)
1.3.6.1.4.1.34097.9.77.1.1.10181Stenth (-32768..32767)read-writecurrent
mMinTotalHighPowerWarning
OBJECT-TYPE
Gets sets or defaults the power min high current warning level. (unit: 0.01kW)
1.3.6.1.4.1.34097.9.77.1.1.10182Shundredth (-32768..32767)read-writecurrent
mMaxTotalHighPowerWarning
OBJECT-TYPE
Gets sets or defaults the power max high current warning level. (unit: 0.01kW)
1.3.6.1.4.1.34097.9.77.1.1.10183Shundredth (-32768..32767)read-writecurrent
mCloudState
OBJECT-TYPE
Set if the device needs to push info to the init cloud (val=0) or to the normal cloud (val=1)
1.3.6.1.4.1.34097.9.77.1.1.10208Unsigned32 (0..2)read-writecurrent
mSensorBias
OBJECT-TYPE
get or set the DC sensor bias (unit: mV)
1.3.6.1.4.1.34097.9.77.1.1.10210Integer32 (-32768..32767)read-writecurrent
mDaisyChainDeviceMode
OBJECT-TYPE
allowed modes: 0: standalone (master without daisy chain slaves) 1: daisy chain master 2: daisy chain slave 1 3: daisy chain slave 2 4: daisy chain slave 3
1.3.6.1.4.1.34097.9.77.1.1.10211Unsigned32 (0..4)read-writecurrent
mSNMPTrapUser
OBJECT-TYPE
Gets, sets or defaults the SNMP tap user out of the user list.
1.3.6.1.4.1.34097.9.77.1.1.10212Unsigned32 (0..4)read-writecurrent
mUSMUser
OBJECT-TYPE
Gets, sets or defaults the SNMP USM security user
1.3.6.1.4.1.34097.9.77.1.1.10213DisplayStringread-writecurrent
mUSMAuthPassphrase
OBJECT-TYPE
Gets, sets or defaults the SNMP USM authentication passphrase (Always MD5)
1.3.6.1.4.1.34097.9.77.1.1.10214DisplayStringread-writecurrent
mUSMPrivPassphrase
OBJECT-TYPE
Gets, sets or defaults the SNMP USM private passphrase (Always AES)
1.3.6.1.4.1.34097.9.77.1.1.10215DisplayStringread-writecurrent
mSNMPV2GetSetEnable
OBJECT-TYPE
Gets, sets or defaults the SNMP V2 Enable for get ,set or walk but not for traps.
1.3.6.1.4.1.34097.9.77.1.1.10216Unsigned32 (0..1)read-writecurrent
mSNMPV3GetSetEnable
OBJECT-TYPE
Gets, sets or defaults the SNMP V3 Enable for get ,set or walk but not for traps.
1.3.6.1.4.1.34097.9.77.1.1.10217Unsigned32 (0..1)read-writecurrent
mUSMAuthPassphraseLength
OBJECT-TYPE
Gets, sets or defaults the SNMP USM authentication passphrase length
1.3.6.1.4.1.34097.9.77.1.1.10218Unsigned32 (0..16)read-writecurrent
mUSMPrivPassphraseLength
OBJECT-TYPE
Gets, sets or defaults the SNMP USM private passphrase length
1.3.6.1.4.1.34097.9.77.1.1.10219Unsigned32 (0..16)read-writecurrent
mSNMPTrapEnable
OBJECT-TYPE
Gets, sets or defaults the SNMP Trap Enable per trap account
1.3.6.1.4.1.34097.9.77.1.1.10222Unsigned32 (0..1)read-writecurrent
mLDAPAttribute
OBJECT-TYPE
Attribute linked to the LDAPFilter
1.3.6.1.4.1.34097.9.77.1.1.10227DisplayStringread-writecurrent
mLDAPPath
OBJECT-TYPE
Relative Path to be used for the LDAPFilter
1.3.6.1.4.1.34097.9.77.1.1.10228DisplayStringread-writecurrent
mLDAPAdminGroupName
OBJECT-TYPE
GroupName for Admin Credentials in LDAP
1.3.6.1.4.1.34097.9.77.1.1.10229DisplayStringread-writecurrent
mLDAPRestrictedGroupName
OBJECT-TYPE
GroupName for Restricted Credentials in LDAP
1.3.6.1.4.1.34097.9.77.1.1.10230DisplayStringread-writecurrent
mLDAPGuestGroupName
OBJECT-TYPE
GroupName for Guest Credentials in LDAP
1.3.6.1.4.1.34097.9.77.1.1.10231DisplayStringread-writecurrent
mLDAPEnable
OBJECT-TYPE
Enable or disable login via LDAP credentials
1.3.6.1.4.1.34097.9.77.1.1.10232Unsigned32 (0..1)read-writecurrent
mLDAPLoginWrapper
OBJECT-TYPE
Wrapper for login in with LDAP
1.3.6.1.4.1.34097.9.77.1.1.10233DisplayStringread-writecurrent
mLDAPServer
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.77.1.1.10235DisplayStringread-writecurrent
mLocalAuthEnable
OBJECT-TYPE
Set if local authentication is still possible if LDAP is enabled
1.3.6.1.4.1.34097.9.77.1.1.10236Unsigned32 (0..1)read-writecurrent
masterIndex
OBJECT-TYPE
Index for the selected Master Module
1.3.6.1.4.1.34097.9.77.1.1.65537Integer32 (1..8)not-accessiblecurrent
masterModuleIndex
OBJECT-TYPE
Selected Master Module
1.3.6.1.4.1.34097.9.77.1.1.65538Integer32 (1..8)not-accessiblecurrent
powerModule
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.80
ePowerTable
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.80.1not-accessiblecurrent
ePowerEntry
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.80.1.1not-accessiblecurrent
pGeneralModuleStatus
OBJECT-TYPE
General status of a module.
1.3.6.1.4.1.34097.9.80.1.1.1Unsigned32read-onlycurrent
pSpecificModuleStatus
OBJECT-TYPE
Specific status of a module.
1.3.6.1.4.1.34097.9.80.1.1.2Unsigned32read-onlycurrent
pCurrentTime
OBJECT-TYPE
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
1.3.6.1.4.1.34097.9.80.1.1.3TimeTicksread-writecurrent
pVoltage
OBJECT-TYPE
Gets the voltage of a power module. (unit: 0.01V)
1.3.6.1.4.1.34097.9.80.1.1.4Uhundredthread-onlycurrent
pFrequency
OBJECT-TYPE
Gets the frequency of the input voltage of a power module. (unit: 0.001Hz)
1.3.6.1.4.1.34097.9.80.1.1.5Uthousandthread-onlycurrent
pCurrent
OBJECT-TYPE
Gets the current of an outlet. (unit: 0.001A)
1.3.6.1.4.1.34097.9.80.1.1.6Uthousandthread-onlycurrent
pPower
OBJECT-TYPE
Gets the power of an outlet. (unit: W)
1.3.6.1.4.1.34097.9.80.1.1.7Unsigned32read-onlycurrent
pStatePortCur
OBJECT-TYPE
Gets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.
1.3.6.1.4.1.34097.9.80.1.1.8CURPORTSTATEread-onlycurrent
pActiveEnergy
OBJECT-TYPE
Gets the energy used by an outlet. (unit: 0.001kWh)
1.3.6.1.4.1.34097.9.80.1.1.9Uthousandthread-onlycurrent
pApparentEnergy
OBJECT-TYPE
Gets the apparent energy used by an outlet. (unit: 0.001kVAh)
1.3.6.1.4.1.34097.9.80.1.1.10Uthousandthread-onlycurrent
pTemperature
OBJECT-TYPE
Gets the current temperature of a temperature sensor. (unit: 0.1K)
1.3.6.1.4.1.34097.9.80.1.1.11Utenthread-onlycurrent
pApparentPower
OBJECT-TYPE
Gets the apparent power of an outlet. (unit: VA)
1.3.6.1.4.1.34097.9.80.1.1.15Unsigned32read-onlycurrent
pPowerFactor
OBJECT-TYPE
Gets the power factor of an outlet. (unit: %)
1.3.6.1.4.1.34097.9.80.1.1.16Unsigned32read-onlycurrent
pTotalCurrent
OBJECT-TYPE
Gets the total current of a power module. (unit: 0.001A)
1.3.6.1.4.1.34097.9.80.1.1.17Uthousandthread-onlycurrent
pTotalRealPower
OBJECT-TYPE
Gets the total power level of a power module. (unit: W)
1.3.6.1.4.1.34097.9.80.1.1.18Unsigned32read-onlycurrent
pTotalApparentPower
OBJECT-TYPE
Gets the total apparent power of a power module. (unit: VA)
1.3.6.1.4.1.34097.9.80.1.1.19Unsigned32read-onlycurrent
pTotalActiveEnergy
OBJECT-TYPE
Gets the total energy of a power module. (unit: 0.001kWh)
1.3.6.1.4.1.34097.9.80.1.1.20Uthousandthread-onlycurrent
pTotalApparentEnergy
OBJECT-TYPE
Gets the total apparent energy of a power module. (unit: 0.001kVAh)
1.3.6.1.4.1.34097.9.80.1.1.21Uthousandthread-onlycurrent
pTotalPowerFactor
OBJECT-TYPE
Gets the total power factor of a power module. (unit: %)
1.3.6.1.4.1.34097.9.80.1.1.22Unsigned32read-onlycurrent
pTimeOnline
OBJECT-TYPE
Gets the amount of seconds since the last reset. (unit: s)
1.3.6.1.4.1.34097.9.80.1.1.24Unsigned32read-onlycurrent
pTotalHarmonicDistortion
OBJECT-TYPE
total harmonic distortion - outlet (unit: 0.1%)
1.3.6.1.4.1.34097.9.80.1.1.50Utenth (0..1000)read-onlycurrent
pPhase
OBJECT-TYPE
the phase between 2 waves (unit: degr)
1.3.6.1.4.1.34097.9.80.1.1.51Unsigned32 (0..65535)read-onlycurrent
pBigCurrent
OBJECT-TYPE
Gets the current of an outlet. (unit: 0.0001A)
1.3.6.1.4.1.34097.9.80.1.1.52Unsigned32read-onlycurrent
pBigPower
OBJECT-TYPE
Gets the power of an outlet. (unit: 0.001W)
1.3.6.1.4.1.34097.9.80.1.1.53Uthousandthread-onlycurrent
pBigApparentPower
OBJECT-TYPE
Gets the apparent power of an outlet. (unit: 0.001VA)
1.3.6.1.4.1.34097.9.80.1.1.54Uthousandthread-onlycurrent
pDetectedPhase
OBJECT-TYPE
Gives the best matching Phase per currentsensor. Updated every 8s. returnes 255 if no good phaselink is found
1.3.6.1.4.1.34097.9.80.1.1.55Unsigned32 (0..255)read-onlycurrent
pModuleName
OBJECT-TYPE
Gets, sets or defaults the module name.
1.3.6.1.4.1.34097.9.80.1.1.10001DisplayStringread-writecurrent
pFirmwareVersion
OBJECT-TYPE
Gets the version of the module's firmware.
1.3.6.1.4.1.34097.9.80.1.1.10002Versionread-onlycurrent
pHardwareVersion
OBJECT-TYPE
Gets the version of a module's hardware.
1.3.6.1.4.1.34097.9.80.1.1.10003Versionread-onlycurrent
pFirmwareID
OBJECT-TYPE
Gets the ID of the module's firmware.
1.3.6.1.4.1.34097.9.80.1.1.10004DisplayStringread-onlycurrent
pHardwareID
OBJECT-TYPE
Gets the ID of a module's hardware.
1.3.6.1.4.1.34097.9.80.1.1.10005DisplayStringread-onlycurrent
pPortName
OBJECT-TYPE
Gets, sets or defaults the name of an outlet.
1.3.6.1.4.1.34097.9.80.1.1.10034DisplayStringread-writecurrent
pPortState
OBJECT-TYPE
Sets the state of an outlet: 0=OFF, 1=ON, 2=POWER CYCLE. To get the state of an outlet use CPORTSTAT (CLI) or pStatePortCur (SNMP) (GUID 8) instead.
1.3.6.1.4.1.34097.9.80.1.1.10035Unsigned32 (0..2)read-writecurrent
pCurrentPriorOff
OBJECT-TYPE
Gets, sets or defaults the priority of an outlet. Priority settings are used when 1 or more outlets must be turned off because the total current of a power module was exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10036Unsigned32 (1..8)read-writecurrent
pDelayOn
OBJECT-TYPE
Gets, sets or defaults the outlet turn-on delay. Use this to reduce inrush current when the Energy Switch boots. (unit: s)
1.3.6.1.4.1.34097.9.80.1.1.10037Unsigned32 (0..65535)read-writecurrent
pMaxCurrentOff
OBJECT-TYPE
Gets, sets or defaults the maximum current off level of an outlet. (unit: 0.001A)
1.3.6.1.4.1.34097.9.80.1.1.10038Uthousandth (100..8000)read-writecurrent
pMaxCurrentWarning
OBJECT-TYPE
Gets, sets or defaults the maximum current warning level of an outlet. (unit: 0.001A)
1.3.6.1.4.1.34097.9.80.1.1.10039Uthousandth (100..8000)read-writecurrent
pMaxPowerOff
OBJECT-TYPE
Gets, sets or defaults the maximum power off level of an outlet. (unit: W)
1.3.6.1.4.1.34097.9.80.1.1.10040Unsigned32 (20..2000)read-writecurrent
pMaxPowerWarning
OBJECT-TYPE
Gets, sets or defaults the maximum power warning level of an outlet. (unit: W)
1.3.6.1.4.1.34097.9.80.1.1.10041Unsigned32 (20..2000)read-writecurrent
pMaxTotalCurrentOff
OBJECT-TYPE
Gets, sets or defaults the total maximum current off level of a power module. (unit: 0.001A)
1.3.6.1.4.1.34097.9.80.1.1.10042Uthousandth (100..16000)read-writecurrent
pMaxTotalCurrentWarning
OBJECT-TYPE
Gets, sets or defaults the total maximum current warning level of a power module. (unit: 0.001A)
1.3.6.1.4.1.34097.9.80.1.1.10043Uthousandth (100..16000)read-writecurrent
pMaxTotalPowerOff
OBJECT-TYPE
Gets, sets or defaults the maximum total power off level. (unit: W)
1.3.6.1.4.1.34097.9.80.1.1.10044Unsigned32 (20..4000)read-writecurrent
pMaxTotalPowerWarning
OBJECT-TYPE
Gets, sets or defaults the maximum total power warning level. (unit: W)
1.3.6.1.4.1.34097.9.80.1.1.10045Unsigned32 (20..4000)read-writecurrent
pMaxVoltageWarning
OBJECT-TYPE
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
1.3.6.1.4.1.34097.9.80.1.1.10047Uhundredth (5000..30000)read-writecurrent
pMinVoltageWarning
OBJECT-TYPE
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
1.3.6.1.4.1.34097.9.80.1.1.10049Uhundredth (5000..30000)read-writecurrent
pMinTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.80.1.1.10052Utenth (2232..4732)read-writecurrent
pMaxTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.80.1.1.10053Utenth (2232..4732)read-writecurrent
pPortStateEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the state of an outlet is changed.
1.3.6.1.4.1.34097.9.80.1.1.10076EVENTFLAGSread-writecurrent
pCurrentOffEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the outlet current off level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10077EVENTFLAGSread-writecurrent
pCurrentWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10078EVENTFLAGSread-writecurrent
pPowerOffEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the power off level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10079EVENTFLAGSread-writecurrent
pPowerWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the power warning level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10080EVENTFLAGSread-writecurrent
pTotalCurrentOffEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the total outlet current off level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10081EVENTFLAGSread-writecurrent
pTotalCurrentWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the total outlet current warning level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10082EVENTFLAGSread-writecurrent
pTotalPowerOffEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the total power off level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10083EVENTFLAGSread-writecurrent
pTotalPowerWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the total power warning level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10084EVENTFLAGSread-writecurrent
pVoltageWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the voltage warning level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10086EVENTFLAGSread-writecurrent
pTemperatureWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the temperature warning level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10087EVENTFLAGSread-writecurrent
pMaxOverheatingOff
OBJECT-TYPE
Gets, sets or defaults the maximum overheat temperature off level. (unit: 0.1K)
1.3.6.1.4.1.34097.9.80.1.1.10090Utenth (2232..4732)read-writecurrent
pOverheatingOffEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the overtemperature off level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10091EVENTFLAGSread-writecurrent
pPowerCycleTime
OBJECT-TYPE
Gets, sets or defaults the time interval that is used to do a power cycle of an outlet. (unit: s)
1.3.6.1.4.1.34097.9.80.1.1.10099Unsigned32 (0..255)read-writecurrent
pExternalSensorLabel
OBJECT-TYPE
Gets, sets or defaults the external sensor label. External sensors can be connected to Energy Sensors.
1.3.6.1.4.1.34097.9.80.1.1.10109DisplayStringread-writecurrent
pMaxOverheatingWarning
OBJECT-TYPE
Gets, sets or defaults the overheating temperature warning level. (unit: 0.1K)
1.3.6.1.4.1.34097.9.80.1.1.10121Utenth (2232..4732)read-writecurrent
pOverheatingWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the overheat warning level is exceeded.
1.3.6.1.4.1.34097.9.80.1.1.10122EVENTFLAGSread-writecurrent
pMicroIntTimeThreshold
OBJECT-TYPE
The minimum time the voltage must be interrupted before it is seen as a micro interruption (unit: 0.1ms)
1.3.6.1.4.1.34097.9.80.1.1.10135Utenth (10..65535)read-writecurrent
pMicroIntEvent
OBJECT-TYPE
Enables or disables the SNMP trap if a microinterruption on the voltage is detected.
1.3.6.1.4.1.34097.9.80.1.1.10136EVENTFLAGSread-writecurrent
pSoftFuseCurrentThreshold
OBJECT-TYPE
The threshold of the soft fuse is a factor of the maximum nominal current off (unit: A)
1.3.6.1.4.1.34097.9.80.1.1.10137Unsigned32 (0..255)read-writecurrent
pSoftFuseDelay
OBJECT-TYPE
The minimum time the current of an outlet must be above the soft fuse current threshold to switch it off. (unit: ms)
1.3.6.1.4.1.34097.9.80.1.1.10138Unsigned32 (0..65535)read-writecurrent
pSoftFuseEvent
OBJECT-TYPE
Enables or disables the SNMP trap if a soft fuse is triggered.
1.3.6.1.4.1.34097.9.80.1.1.10139EVENTFLAGSread-writecurrent
pPhaseShiftEvent
OBJECT-TYPE
Enables or disables the SNMP trap if a phase shift on the voltage is detected.
1.3.6.1.4.1.34097.9.80.1.1.10140EVENTFLAGSread-writecurrent
pSchedulePortOnTime
OBJECT-TYPE
Gets, sets or defaults the time for the scheduler to turn on an outlet. (unit: min)
1.3.6.1.4.1.34097.9.80.1.1.10146Unsigned32 (0..1439)read-writecurrent
pSchedulePortOffTime
OBJECT-TYPE
Gets, sets or defaults the time for the scheduler to turn off an outlet. (unit: min)
1.3.6.1.4.1.34097.9.80.1.1.10147Unsigned32 (0..1439)read-writecurrent
pEnableSchedulePort
OBJECT-TYPE
Enables or disables the scheduler on an outlet. When enabled the scheduling is repeated daily.
1.3.6.1.4.1.34097.9.80.1.1.10148Unsigned32 (0..1)read-writecurrent
pBlockSetPortOff
OBJECT-TYPE
Prevent outlets to be set off (only delay on and powercycle are still possible).
1.3.6.1.4.1.34097.9.80.1.1.10161Unsigned32 (0..1)read-writecurrent
pSchedulePortChangeEvent
OBJECT-TYPE
event if a port has changed state because of the scheduler
1.3.6.1.4.1.34097.9.80.1.1.10166EVENTFLAGSread-writecurrent
pAgentIP
OBJECT-TYPE
IP address of the agent associated to this outlet
1.3.6.1.4.1.34097.9.80.1.1.10172IpAddressread-writecurrent
pAgentPort
OBJECT-TYPE
Network port on which the associated agent will listen
1.3.6.1.4.1.34097.9.80.1.1.10173Unsigned32 (0..65535)read-writecurrent
pAgentCommunicationEventFlags
OBJECT-TYPE
Event flags for events related to agent communication
1.3.6.1.4.1.34097.9.80.1.1.10174EVENTFLAGSread-writecurrent
pAlwaysOn
OBJECT-TYPE
Outlets marked as Always On can only be power cycled by the user
1.3.6.1.4.1.34097.9.80.1.1.10175Unsigned32 (0..1)read-writecurrent
pGenericTransducerParameters
OBJECT-TYPE
sets the slope of the transducer transfer function when the generic transducer type is selected (unit: mA/V)
1.3.6.1.4.1.34097.9.80.1.1.10190Integer32 (2000..2000000000)read-writecurrent
pMaxBigCurrentWarning
OBJECT-TYPE
Gets, sets or defaults the maximum current warning level of an outlet. (unit: 0.0001A)
1.3.6.1.4.1.34097.9.80.1.1.10193Unsigned32 (100..400000000)read-writecurrent
pMaxBigPowerWarning
OBJECT-TYPE
Gets, sets or defaults the maximum power warning level of an outlet. (unit: 0.001W)
1.3.6.1.4.1.34097.9.80.1.1.10194Uthousandth (2000..2000000000)read-writecurrent
pGroupNumber
OBJECT-TYPE
Group number per port to group ports
1.3.6.1.4.1.34097.9.80.1.1.10195Unsigned32 (0..5)read-writecurrent
pCurrentSensorSelector
OBJECT-TYPE
Selection of the currentsensor connected to port. To enter your own value you need to use 255 and fill in guid 10190.
1.3.6.1.4.1.34097.9.80.1.1.10197Unsigned32 (0..255)read-writecurrent
pMinBigCurrentWarning
OBJECT-TYPE
Gets, sets or defaults the minimum current warning level of a port. (unit: 0.0001A)
1.3.6.1.4.1.34097.9.80.1.1.10209Unsigned32 (0..400000000)read-writecurrent
powerIndex
OBJECT-TYPE
Index for the selected Power Module
1.3.6.1.4.1.34097.9.80.1.1.65537Integer32 (1..8)not-accessiblecurrent
powerModuleIndex
OBJECT-TYPE
Selected Power Module
1.3.6.1.4.1.34097.9.80.1.1.65538Integer32 (1..8)not-accessiblecurrent
measuring3phaseModule
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.81
eMeasuring3PhaseTable
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.81.1not-accessiblecurrent
eMeasuring3PhaseEntry
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.81.1.1not-accessiblecurrent
qGeneralModuleStatus
OBJECT-TYPE
General status of a module.
1.3.6.1.4.1.34097.9.81.1.1.1Unsigned32read-onlycurrent
qSpecificModuleStatus
OBJECT-TYPE
Specific status of a module.
1.3.6.1.4.1.34097.9.81.1.1.2Unsigned32read-onlycurrent
qCurrentTime
OBJECT-TYPE
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
1.3.6.1.4.1.34097.9.81.1.1.3TimeTicksread-writecurrent
qVoltage
OBJECT-TYPE
Gets the voltage of a power module. (unit: 0.01V)
1.3.6.1.4.1.34097.9.81.1.1.4Uhundredthread-onlycurrent
qFrequency
OBJECT-TYPE
Gets the frequency of the input voltage of a power module. (unit: 0.001Hz)
1.3.6.1.4.1.34097.9.81.1.1.5Uthousandthread-onlycurrent
qActiveEnergy
OBJECT-TYPE
Gets the energy used by an outlet. (unit: 0.001kWh)
1.3.6.1.4.1.34097.9.81.1.1.9Uthousandthread-onlycurrent
qApparentEnergy
OBJECT-TYPE
Gets the apparent energy used by an outlet. (unit: 0.001kVAh)
1.3.6.1.4.1.34097.9.81.1.1.10Uthousandthread-onlycurrent
qTemperature
OBJECT-TYPE
Gets the current temperature of a temperature sensor. (unit: 0.1K)
1.3.6.1.4.1.34097.9.81.1.1.11Utenthread-onlycurrent
qPowerFactor
OBJECT-TYPE
Gets the power factor of an outlet. (unit: %)
1.3.6.1.4.1.34097.9.81.1.1.16Unsigned32read-onlycurrent
qTimeOnline
OBJECT-TYPE
Gets the amount of seconds since the last reset. (unit: s)
1.3.6.1.4.1.34097.9.81.1.1.24Unsigned32read-onlycurrent
qIOPort
OBJECT-TYPE
Gets the state of a digital input.
1.3.6.1.4.1.34097.9.81.1.1.30Unsigned32 (0..1)read-onlycurrent
qTotalHarmonicDistortion
OBJECT-TYPE
total harmonic distortion - outlet (unit: 0.1%)
1.3.6.1.4.1.34097.9.81.1.1.50Utenth (0..1000)read-onlycurrent
qPhase
OBJECT-TYPE
the phase between 2 waves (unit: degr)
1.3.6.1.4.1.34097.9.81.1.1.51Unsigned32 (0..65535)read-onlycurrent
qBigCurrent
OBJECT-TYPE
Gets the current of an outlet. (unit: 0.0001A)
1.3.6.1.4.1.34097.9.81.1.1.52Unsigned32read-onlycurrent
qBigPower
OBJECT-TYPE
Gets the power of an outlet. (unit: 0.001W)
1.3.6.1.4.1.34097.9.81.1.1.53Uthousandthread-onlycurrent
qBigApparentPower
OBJECT-TYPE
Gets the apparent power of an outlet. (unit: 0.001VA)
1.3.6.1.4.1.34097.9.81.1.1.54Uthousandthread-onlycurrent
qStatus
OBJECT-TYPE
status of a module
1.3.6.1.4.1.34097.9.81.1.1.1000Unsigned32 (0..65535)read-onlycurrent
qModuleName
OBJECT-TYPE
Gets, sets or defaults the module name.
1.3.6.1.4.1.34097.9.81.1.1.10001DisplayStringread-writecurrent
qFirmwareVersion
OBJECT-TYPE
Gets the version of the module's firmware.
1.3.6.1.4.1.34097.9.81.1.1.10002Versionread-onlycurrent
qHardwareVersion
OBJECT-TYPE
Gets the version of a module's hardware.
1.3.6.1.4.1.34097.9.81.1.1.10003Versionread-onlycurrent
qFirmwareID
OBJECT-TYPE
Gets the ID of the module's firmware.
1.3.6.1.4.1.34097.9.81.1.1.10004DisplayStringread-onlycurrent
qHardwareID
OBJECT-TYPE
Gets the ID of a module's hardware.
1.3.6.1.4.1.34097.9.81.1.1.10005DisplayStringread-onlycurrent
qPortState
OBJECT-TYPE
Sets the state of an outlet: 0=OFF, 1=ON, 2=POWER CYCLE. To get the state of an outlet use CPORTSTAT (CLI) or pStatePortCur (SNMP) (GUID 8) instead.
1.3.6.1.4.1.34097.9.81.1.1.10035Unsigned32 (0..1)read-writecurrent
qMaxVoltageWarning
OBJECT-TYPE
Gets, sets or defaults the maximum voltage warning level. (unit: 0.01V)
1.3.6.1.4.1.34097.9.81.1.1.10047Uhundredth (5000..30000)read-writecurrent
qMinVoltageWarning
OBJECT-TYPE
Gets, sets or defaults the minimum voltage warning level. (unit: 0.01V)
1.3.6.1.4.1.34097.9.81.1.1.10049Uhundredth (5000..30000)read-writecurrent
qMinTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the minimum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.81.1.1.10052Utenth (2232..4732)read-writecurrent
qMaxTemperatureWarning
OBJECT-TYPE
Gets, sets or defaults the maximum temperature warning level (use DEF accessor to reset). (unit: 0.1K)
1.3.6.1.4.1.34097.9.81.1.1.10053Utenth (2232..4732)read-writecurrent
qPortStateEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the state of an outlet is changed.
1.3.6.1.4.1.34097.9.81.1.1.10076EVENTFLAGSread-writecurrent
qCurrentWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the outlet current warning level is exceeded.
1.3.6.1.4.1.34097.9.81.1.1.10078EVENTFLAGSread-writecurrent
qPowerWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the power warning level is exceeded.
1.3.6.1.4.1.34097.9.81.1.1.10080EVENTFLAGSread-writecurrent
qVoltageWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the voltage warning level is exceeded.
1.3.6.1.4.1.34097.9.81.1.1.10086EVENTFLAGSread-writecurrent
qTemperatureWarningEvent
OBJECT-TYPE
Enables or disables the SNMP trap if the temperature warning level is exceeded.
1.3.6.1.4.1.34097.9.81.1.1.10087EVENTFLAGSread-writecurrent
qMicroIntTimeThreshold
OBJECT-TYPE
The minimum time the voltage must be interrupted before it is seen as a micro interruption (unit: 0.1ms)
1.3.6.1.4.1.34097.9.81.1.1.10135Utenth (10..65535)read-writecurrent
qMicroIntEvent
OBJECT-TYPE
Enables or disables the SNMP trap if a microinterruption on the voltage is detected.
1.3.6.1.4.1.34097.9.81.1.1.10136EVENTFLAGSread-writecurrent
qDeviceID
OBJECT-TYPE
The ID of the device.
1.3.6.1.4.1.34097.9.81.1.1.10150DisplayStringread-onlycurrent
qDeviceVersion
OBJECT-TYPE
The version of the device.
1.3.6.1.4.1.34097.9.81.1.1.10151Versionread-onlycurrent
qMaxBigCurrentWarning
OBJECT-TYPE
Gets, sets or defaults the maximum current warning level of an outlet. (unit: 0.0001A)
1.3.6.1.4.1.34097.9.81.1.1.10193Unsigned32 (100..400000000)read-writecurrent
qMaxBigPowerWarning
OBJECT-TYPE
Gets, sets or defaults the maximum power warning level of an outlet. (unit: 0.001W)
1.3.6.1.4.1.34097.9.81.1.1.10194Uthousandth (2000..2000000000)read-writecurrent
qCurrentSensorSelector
OBJECT-TYPE
Selection of the currentsensor connected to port. To enter your own value you need to use 255 and fill in guid 10190.
1.3.6.1.4.1.34097.9.81.1.1.10197Unsigned32 (0..255)read-writecurrent
qMinBigCurrentWarning
OBJECT-TYPE
Gets, sets or defaults the minimum current warning level of a port. (unit: 0.0001A)
1.3.6.1.4.1.34097.9.81.1.1.10209Unsigned32 (0..400000000)read-writecurrent
qkWhMode
OBJECT-TYPE
Set the mode when to count kWh, 0 = always, 1 = only positive, 2= only negative
1.3.6.1.4.1.34097.9.81.1.1.10234Unsigned32 (0..2)read-writecurrent
measuring3phaseIndex
OBJECT-TYPE
Index for the selected Measuring3Phase Module
1.3.6.1.4.1.34097.9.81.1.1.65537Integer32 (1..8)not-accessiblecurrent
measuring3phaseModuleIndex
OBJECT-TYPE
Selected Measuring3Phase Module
1.3.6.1.4.1.34097.9.81.1.1.65538Integer32 (1..8)not-accessiblecurrent
pcModule
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.85
ePCTable
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.85.1not-accessiblecurrent
ePCEntry
OBJECT-TYPE
NO_INFO
1.3.6.1.4.1.34097.9.85.1.1not-accessiblecurrent
uGeneralModuleStatus
OBJECT-TYPE
General status of a module.
1.3.6.1.4.1.34097.9.85.1.1.1Unsigned32read-onlycurrent
uSpecificModuleStatus
OBJECT-TYPE
Specific status of a module.
1.3.6.1.4.1.34097.9.85.1.1.2Unsigned32read-onlycurrent
uCurrentTime
OBJECT-TYPE
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
1.3.6.1.4.1.34097.9.85.1.1.3TimeTicksread-writecurrent
uVoltage
OBJECT-TYPE
Gets the voltage of a power module. (unit: 0.01V)
1.3.6.1.4.1.34097.9.85.1.1.4Uhundredth (0..65535)read-onlycurrent
uCurrent
OBJECT-TYPE
Gets the current of an outlet. (unit: 0.001A)
1.3.6.1.4.1.34097.9.85.1.1.6Uthousandth (0..65535)read-onlycurrent
uStatePortCur
OBJECT-TYPE
Gets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.
1.3.6.1.4.1.34097.9.85.1.1.8CURPORTSTATEread-onlycurrent
uTemperature
OBJECT-TYPE
Gets the current temperature of a temperature sensor. (unit: 0.1K)
1.3.6.1.4.1.34097.9.85.1.1.11Utenth (2232..4732)read-onlycurrent
uHumidity
OBJECT-TYPE
Gets the relative humidity. (unit: 0.1RH)
1.3.6.1.4.1.34097.9.85.1.1.12Utenth (0..1000)read-onlycurrent
uModuleName
OBJECT-TYPE
Gets, sets or defaults the module name.
1.3.6.1.4.1.34097.9.85.1.1.10001DisplayStringread-writecurrent
uFirmwareVersion
OBJECT-TYPE
Gets the version of the module's firmware.
1.3.6.1.4.1.34097.9.85.1.1.10002Versionread-onlycurrent
uHardwareVersion
OBJECT-TYPE
Gets the version of a module's hardware.
1.3.6.1.4.1.34097.9.85.1.1.10003Versionread-onlycurrent
uFirmwareID
OBJECT-TYPE
Gets the ID of the module's firmware.
1.3.6.1.4.1.34097.9.85.1.1.10004DisplayStringread-onlycurrent
uHardwareID
OBJECT-TYPE
Gets the ID of a module's hardware.
1.3.6.1.4.1.34097.9.85.1.1.10005DisplayStringread-onlycurrent
uPortState
OBJECT-TYPE
Sets the state of an outlet: 0=OFF, 1=ON, 2=POWER CYCLE. To get the state of an outlet use CPORTSTAT (CLI) or pStatePortCur (SNMP) (GUID 8) instead.
1.3.6.1.4.1.34097.9.85.1.1.10035Unsigned32 (0..1)read-writecurrent
pcIndex
OBJECT-TYPE
Index for the selected PC Module
1.3.6.1.4.1.34097.9.85.1.1.65537Integer32 (1..8)not-accessiblecurrent
pcModuleIndex
OBJECT-TYPE
Selected PC Module
1.3.6.1.4.1.34097.9.85.1.1.65538Integer32 (1..8)not-accessiblecurrent
testmoduleModule
OBJECT-IDENTITY
1.3.6.1.4.1.34097.9.89
eTestModuleTable
OBJECT-TYPE
Module to test the R-bus
1.3.6.1.4.1.34097.9.89.1not-accessiblecurrent
eTestModuleEntry
OBJECT-TYPE
Module to test the R-bus
1.3.6.1.4.1.34097.9.89.1.1not-accessiblecurrent
yGeneralModuleStatus
OBJECT-TYPE
General status of a module.
1.3.6.1.4.1.34097.9.89.1.1.1Unsigned32read-onlycurrent
ySpecificModuleStatus
OBJECT-TYPE
Specific status of a module.
1.3.6.1.4.1.34097.9.89.1.1.2Unsigned32read-onlycurrent
yCurrentTime
OBJECT-TYPE
Gets or sets the current time (not possible when NTP is enabled). (unit: UNIX)
1.3.6.1.4.1.34097.9.89.1.1.3TimeTicksread-writecurrent
yCurrent
OBJECT-TYPE
Gets the current of an outlet. (unit: 0.001A)
1.3.6.1.4.1.34097.9.89.1.1.6Uthousandthread-onlycurrent
yStatePortCur
OBJECT-TYPE
Gets the current state of an outlet. To toggle an outlet use PORTSTAT (CLI) or pPortstate (SNMP) (GUID 10035) instead.
1.3.6.1.4.1.34097.9.89.1.1.8CURPORTSTATEread-onlycurrent
yAnalogueInput
OBJECT-TYPE
Gets the value of an analog input (voltage). (unit: mV)
1.3.6.1.4.1.34097.9.89.1.1.27Unsigned32read-onlycurrent
yModuleName
OBJECT-TYPE
Gets, sets or defaults the module name.
1.3.6.1.4.1.34097.9.89.1.1.10001DisplayStringread-writecurrent
yFirmwareVersion
OBJECT-TYPE
Gets the version of the module's firmware.
1.3.6.1.4.1.34097.9.89.1.1.10002Versionread-onlycurrent
yHardwareVersion
OBJECT-TYPE
Gets the version of a module's hardware.
1.3.6.1.4.1.34097.9.89.1.1.10003Versionread-onlycurrent
yFirmwareID
OBJECT-TYPE
Gets the ID of the module's firmware.
1.3.6.1.4.1.34097.9.89.1.1.10004DisplayStringread-onlycurrent
yHardwareID
OBJECT-TYPE
Gets the ID of a module's hardware.
1.3.6.1.4.1.34097.9.89.1.1.10005DisplayStringread-onlycurrent
testmoduleIndex
OBJECT-TYPE
Index for the selected TestModule Module
1.3.6.1.4.1.34097.9.89.1.1.65537Integer32 (1..8)not-accessiblecurrent
testmoduleModuleIndex
OBJECT-TYPE
Selected TestModule Module
1.3.6.1.4.1.34097.9.89.1.1.65538Integer32 (1..8)not-accessiblecurrent

Notifications

NameOIDStatus
errorValueTooHighRaised
NOTIFICATION-TYPE
This trap is sent when an element goes above the specified error threshold indicating the maximum value for this element
1.3.6.1.4.1.34097.9.0.16current
errorValueTooLowRaised
NOTIFICATION-TYPE
This trap is sent when an element goes below the specified error threshold indicating the minimum value for this element
1.3.6.1.4.1.34097.9.0.17current
errorRaised
NOTIFICATION-TYPE
This trap is sent when an element gets into an error state
1.3.6.1.4.1.34097.9.0.18current
errorValueTooHighCleared
NOTIFICATION-TYPE
This trap is sent when an element goes below the specified error threshold indicating the maximum value for this element
1.3.6.1.4.1.34097.9.0.19current
errorValueTooLowCleared
NOTIFICATION-TYPE
This trap is sent when an element goes above the specified error threshold indicating the minimum value for this element
1.3.6.1.4.1.34097.9.0.20current
errorCleared
NOTIFICATION-TYPE
This trap is sent when an element recovers from an error state
1.3.6.1.4.1.34097.9.0.21current
warningValueTooHighRaised
NOTIFICATION-TYPE
This trap is sent when an element goes above the specified warning threshold indicating the maximum value for this element
1.3.6.1.4.1.34097.9.0.48current
warningValueTooLowRaised
NOTIFICATION-TYPE
This trap is sent when an element goes below the specified warning threshold indicating the minimum value for this element
1.3.6.1.4.1.34097.9.0.49current
warningRaised
NOTIFICATION-TYPE
This trap is sent when an element gets into an warning state
1.3.6.1.4.1.34097.9.0.50current
warningValueTooHighCleared
NOTIFICATION-TYPE
This trap is sent when an element goes below the specified warning threshold indicating the maximum value for this element
1.3.6.1.4.1.34097.9.0.51current
warningValueTooLowCleared
NOTIFICATION-TYPE
This trap is sent when an element goes above the specified warning threshold indicating the minimum value for this element
1.3.6.1.4.1.34097.9.0.52current
warningCleared
NOTIFICATION-TYPE
This trap is sent when an element recovers from an warning state
1.3.6.1.4.1.34097.9.0.53current
warningMicroInterruption
NOTIFICATION-TYPE
This event is raised when a micro interruption is detected above a threshold time
1.3.6.1.4.1.34097.9.0.54current
warningPhaseShift
NOTIFICATION-TYPE
This event is raised when a phase shift is detected above a threshold
1.3.6.1.4.1.34097.9.0.55current
infoValueTooHighRaised
NOTIFICATION-TYPE
This trap is sent when an element goes above a specified threshold indicating the maximum value for this element
1.3.6.1.4.1.34097.9.0.80current
infoValueTooLowRaised
NOTIFICATION-TYPE
This trap is sent when an element goes below a specified threshold indicating the minimum value for this element
1.3.6.1.4.1.34097.9.0.81current
infoRaised
NOTIFICATION-TYPE
This trap is sent when an element gets into a specific state
1.3.6.1.4.1.34097.9.0.82current
infoValueTooHighCleared
NOTIFICATION-TYPE
This trap is sent when an element goes below a specified threshold indicating the maximum value for this element
1.3.6.1.4.1.34097.9.0.83current
infoValueTooLowCleared
NOTIFICATION-TYPE
This trap is sent when an element goes above a specified threshold indicating the minimum value for this element
1.3.6.1.4.1.34097.9.0.84current
infoCleared
NOTIFICATION-TYPE
This trap is sent when an element recovers from a specific state
1.3.6.1.4.1.34097.9.0.85current
infoPortStateChanged
NOTIFICATION-TYPE
This trap is sent when a port changes state for any reason
1.3.6.1.4.1.34097.9.0.96current
infoReset
NOTIFICATION-TYPE
This trap is sent when a module is reboot
1.3.6.1.4.1.34097.9.0.97current
infoUpgrade
NOTIFICATION-TYPE
This trap is sent when upgrade or downgrade of firmware is completed
1.3.6.1.4.1.34097.9.0.98current
infoPortSchedule
NOTIFICATION-TYPE
This trap is sent when a port changes state because of a scheduling
1.3.6.1.4.1.34097.9.0.99current
infoHeartbeat
NOTIFICATION-TYPE
This trap is sent when a heartbeat has occurred
1.3.6.1.4.1.34097.9.0.100current

Conformance

NameOIDStatus
esRacktivityMIBGroup
OBJECT-GROUP
All accessible objects in a Racktivity device
1.3.6.1.4.1.34097.9.2.1.1current
esRacktivityNotificationGroup
NOTIFICATION-GROUP
All notification that can be sent out by a Racktivity device
1.3.6.1.4.1.34097.9.2.1.2current
esRacktivityConpliance
MODULE-COMPLIANCE
The compliance statements for a Racktivity device.
1.3.6.1.4.1.34097.9.2.2.1current