MIBs Depot

ERPS-MIB

Registered at
1.3.6.1.4.1.171.12.78
Last updated
2013-07-02 00:00
Organization
D-Link Corp.
Namespace
dlink
Source file
ERPS-MIB
Digest
sha256:275bb505791ed8fa98baa29fa2cb3f817f05920e1a1598e52505757747ade5e8

Description

The MIB module for managing Ethernet Ring Protection Switching.

Contact

http://support.dlink.com

Imports

FromSymbols
DLINK-ID-REC-MIBdlink-common-mgmt
Q-BRIDGE-MIBVlanIdOrNone
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
DLINK-ID-REC-MIB
ERPS-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
VidList
type

Objects

NameOIDSyntaxAccessStatus
swERPSCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.78.1
swERPSAdminState
OBJECT-TYPE
This object indicates the ERPS state of the bridge.
1.3.6.1.4.1.171.12.78.1.1INTEGER {enabled(1), disabled(2)}read-writecurrent
swERPSLogState
OBJECT-TYPE
This object indicates the ERPS log state of the bridge.
1.3.6.1.4.1.171.12.78.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
swERPSTrapState
OBJECT-TYPE
This object indicates the ERPS trap state of the bridge.
1.3.6.1.4.1.171.12.78.1.3INTEGER {enabled(1), disabled(2)}read-writecurrent
swERPSInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.78.2
swERPSMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.78.3
swERPSMgmtRAPSVlanTable
OBJECT-TYPE
This table contains the ERPS ring configuration information.
1.3.6.1.4.1.171.12.78.3.1not-accessiblecurrent
swERPSMgmtRAPSVlanEntry
OBJECT-TYPE
A list of the ERPS ring configuration information.
1.3.6.1.4.1.171.12.78.3.1.1not-accessiblecurrent
swERPSMgmtRAPSVlanId
OBJECT-TYPE
The RAPS VLAN is an index of the configuration.
1.3.6.1.4.1.171.12.78.3.1.1.1INTEGERread-onlycurrent
swERPSMgmtRAPSWestPort
OBJECT-TYPE
This is one of the RPL owner ports.The RPL owner may block this port. The value 0 indicates the west port is a virtual channel.
1.3.6.1.4.1.171.12.78.3.1.1.2INTEGER (0 | 1..65535)read-writecurrent
swERPSMgmtRAPSWestPortState
OBJECT-TYPE
This is the west port state. The state may change occasionally. When the west port is configured on a virtual channel, the west port state is always forwarding.
1.3.6.1.4.1.171.12.78.3.1.1.3INTEGER {fowarding(1), blocking(2), signal-fail(3)}read-onlycurrent
swERPSMgmtRAPSEastPort
OBJECT-TYPE
This is the other RPL owner port.The RPL Owner may block this port. The value 0 indicates the west port is a virtual channel.
1.3.6.1.4.1.171.12.78.3.1.1.4INTEGER (0 | 1..65535)read-writecurrent
swERPSMgmtRAPSEastPortState
OBJECT-TYPE
This is the east port state. The state may change occasionally. When the east port is configured on a virtual channel, the east port state is always forwarding.
1.3.6.1.4.1.171.12.78.3.1.1.5INTEGER {fowarding(1), blocking(2), signal-fail(3)}read-onlycurrent
swERPSMgmtRAPSRPLPort
OBJECT-TYPE
When the port enable state is enabled, the RPL port's current port role is defined by the ERPS application.
1.3.6.1.4.1.171.12.78.3.1.1.6INTEGER {none(1), west(2), east(3)}read-writecurrent
swERPSMgmtRAPSRPLOwnerAdminState
OBJECT-TYPE
The administrative value of the RPL owner state. The RPL owner is an Ethernet Ring Node adjacent to the RPL that is responsible for blocking its end of the RPL under normal conditions.
1.3.6.1.4.1.171.12.78.3.1.1.7INTEGER {enabled(1), disabled(2)}read-writecurrent
swERPSMgmtRAPSProtectionVlan
OBJECT-TYPE
The protection VLAN has prevented a loop.
1.3.6.1.4.1.171.12.78.3.1.1.8VidListread-writecurrent
swERPSMgmtRAPSRingMEL
OBJECT-TYPE
The ring MEL is the maintenance entity group (MEG) level that provides a communication channel for the ring automatic protection switching (RAPS) information.
1.3.6.1.4.1.171.12.78.3.1.1.9INTEGER (0..7)read-writecurrent
swERPSMgmtRAPSHoldOffTime
OBJECT-TYPE
In order to coordinate the timing of protection switches at multiple layers.
1.3.6.1.4.1.171.12.78.3.1.1.10INTEGER (0..10000)read-writecurrent
swERPSMgmtRAPSGuardTime
OBJECT-TYPE
This is used to prevent ring nodes from receiving outdated RAPS messages.
1.3.6.1.4.1.171.12.78.3.1.1.11INTEGER (10..2000)read-writecurrent
swERPSMgmtRAPSWTRTime
OBJECT-TYPE
When revertive is enabled, this is used to prevent frequent operation of the protection switch due to an intermittent defect. A failed working transport entity must become stable in a fault-free state.
1.3.6.1.4.1.171.12.78.3.1.1.12INTEGER (1..12)read-writecurrent
swERPSMgmtRAPSRingState
OBJECT-TYPE
This indicates the state of the ring.The available states are: begin, init, idle, or protection.
1.3.6.1.4.1.171.12.78.3.1.1.13INTEGER {begin(1), init(2), idle(3), protection(4)}read-onlycurrent
swERPSMgmtRAPSRingAdminState
OBJECT-TYPE
This indicates the administrative state of the ring.
1.3.6.1.4.1.171.12.78.3.1.1.14INTEGER {enabled(1), disabled(2)}read-writecurrent
swERPSMgmtRAPSRPLOwnerOperStatus
OBJECT-TYPE
The current operational value of the RPL owner state. The value 'active' is used to indicate that the RPL owner administrative state is enabled and the device is operating as the active RPL owner. The value 'inactive' is used to indicate that the RPL owner administrative state is enabled, but the device is operating as the inactive RPL owner. The value 'disabled' is used to indicate that the RPL owner administrative state of the device is disabled.
1.3.6.1.4.1.171.12.78.3.1.1.15INTEGER {active(1), inactive(2), disabled(3)}read-onlycurrent
swERPSMgmtRAPSProtectionVlanRangeList1to64
OBJECT-TYPE
This object indicates the VLAN range (1-512) that belong to the protected VLANs.
1.3.6.1.4.1.171.12.78.3.1.1.16OCTET STRING (SIZE(64))read-writecurrent
swERPSMgmtRAPSProtectionVlanRangeList65to128
OBJECT-TYPE
This object indicates the VLAN range (513-1024) that belong to the protected VLANs.
1.3.6.1.4.1.171.12.78.3.1.1.17OCTET STRING (SIZE(64))read-writecurrent
swERPSMgmtRAPSProtectionVlanRangeList129to192
OBJECT-TYPE
This object indicates the VLAN range (1025-1536) that belong to the protected VLANs.
1.3.6.1.4.1.171.12.78.3.1.1.18OCTET STRING (SIZE(64))read-writecurrent
swERPSMgmtRAPSProtectionVlanRangeList193to256
OBJECT-TYPE
This object indicates the VLAN range (1537-2048) that belong to the protected VLANs.
1.3.6.1.4.1.171.12.78.3.1.1.19OCTET STRING (SIZE(64))read-writecurrent
swERPSMgmtRAPSProtectionVlanRangeList257to320
OBJECT-TYPE
This object indicates the VLAN range (2049-2560) that belong to the protected VLANs.
1.3.6.1.4.1.171.12.78.3.1.1.20OCTET STRING (SIZE(64))read-writecurrent
swERPSMgmtRAPSProtectionVlanRangeList321to384
OBJECT-TYPE
This object indicates the VLAN range (2561-3072) that belongs to the protected VLANs.
1.3.6.1.4.1.171.12.78.3.1.1.21OCTET STRING (SIZE(64))read-writecurrent
swERPSMgmtRAPSProtectionVlanRangeList385to448
OBJECT-TYPE
This object indicates the VLAN range (3073-3584) that belong to the protected VLANs.
1.3.6.1.4.1.171.12.78.3.1.1.22OCTET STRING (SIZE(64))read-writecurrent
swERPSMgmtRAPSProtectionVlanRangeList449to512
OBJECT-TYPE
This object indicates the VLAN range (3585-4096) that belong to the protected VLANs.
1.3.6.1.4.1.171.12.78.3.1.1.23OCTET STRING (SIZE(64))read-writecurrent
swERPSMgmtRAPSRevertive
OBJECT-TYPE
The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after revovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link.
1.3.6.1.4.1.171.12.78.3.1.1.24INTEGER {enabled(1), disabled(2)}read-writecurrent
swERPSMgmtRAPSOperWestPort
OBJECT-TYPE
This object indicates actual running ring west port. The value 0 indicates the west port is a virtual channel.
1.3.6.1.4.1.171.12.78.3.1.1.25INTEGER (0 | 1..65535)read-onlycurrent
swERPSMgmtRAPSOperEastPort
OBJECT-TYPE
This object indicates actual running ring east port. The value 0 indicates the east port is a virtual channel.
1.3.6.1.4.1.171.12.78.3.1.1.26INTEGER (0 | 1..65535)read-onlycurrent
swERPSMgmtRAPSOperRPLPort
OBJECT-TYPE
This object indicates actual running ring RPL port.
1.3.6.1.4.1.171.12.78.3.1.1.27INTEGER {none(1), west(2), east(3)}read-onlycurrent
swERPSMgmtRAPSRPLOwnerOperState
OBJECT-TYPE
This object indicates actual running RPL owner state.
1.3.6.1.4.1.171.12.78.3.1.1.28INTEGER {enabled(1), disabled(2)}read-onlycurrent
swERPSMgmtRAPSRowStatus
OBJECT-TYPE
This object indicates the RowStatus of this entry.
1.3.6.1.4.1.171.12.78.3.1.1.100RowStatusread-createcurrent
swERPSMgmtSubRingCtrlTable
OBJECT-TYPE
This table contains the ERPS sub-ring configuration information.
1.3.6.1.4.1.171.12.78.3.2not-accessiblecurrent
swERPSMgmtSubRingCtrlEntry
OBJECT-TYPE
A list of the ERPS sub-ring configuration information.
1.3.6.1.4.1.171.12.78.3.2.1not-accessiblecurrent
swERPSMgmtSubRingCtrlRAPSVlanId
OBJECT-TYPE
The RAPS VLAN is an index of the configuration.
1.3.6.1.4.1.171.12.78.3.2.1.1INTEGERnot-accessiblecurrent
swERPSMgmtSubRingCtrlSubRingRAPSVlanId
OBJECT-TYPE
This indicates the ring control VLAN-ID of the sub-ring which connects to another ring.
1.3.6.1.4.1.171.12.78.3.2.1.2INTEGERnot-accessiblecurrent
swERPSMgmtSubRingCtrlTCPropagationState
OBJECT-TYPE
This indicates the state of the sub-ring topology change propagation.
1.3.6.1.4.1.171.12.78.3.2.1.3INTEGER {enabled(1), disabled(2)}read-writecurrent
swERPSMgmtSubRingCtrlRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.12.78.3.2.1.4RowStatusread-createcurrent
swERPSNotify
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.78.4
swERPSNotifyPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.78.4.0
swERPSNotificationBindings
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.78.4.2
swERPSNodeId
OBJECT-TYPE
This used trap object means the node MAC.
1.3.6.1.4.1.171.12.78.4.2.1MacAddressaccessible-for-notifycurrent

Notifications

NameOIDStatus
swERPSSFDetectedTrap
NOTIFICATION-TYPE
When a signal failure occurs, a trap will be generated.
1.3.6.1.4.1.171.12.78.4.0.1current
swERPSSFClearedTrap
NOTIFICATION-TYPE
When the signal failure clears, a trap will be generated.
1.3.6.1.4.1.171.12.78.4.0.2current
swERPSRPLOwnerConflictTrap
NOTIFICATION-TYPE
When a conflict occurs, a trap will be generated.
1.3.6.1.4.1.171.12.78.4.0.3current