MIBs Depot

EQUIPMENT-MIB

Registered at
1.3.6.1.4.1.171.12.11
Last updated
2011-04-20 00:00
Organization
D-Link Corp.
Namespace
dlink
Source file
EQUIPMENT-MIB
Digest
sha256:ef8f6253557c8299b849cf8eeaebc1a18097ae3eec1543fd2bf1f880ebe7d353

Description

equipments MIB.

Contact

http://support.dlink.com

Imports

FromSymbols
DLINK-ID-REC-MIBAgentNotifyLevel, dlink-common-mgmt
Q-BRIDGE-MIBPortList
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue
TIMERANGE-MIBswTimeRangeMgmtRangeName

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
DLINK-ID-REC-MIB
EQUIPMENT-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TIMERANGE-MIB
TOKEN-RING-RMON-MIB

Textual conventions

NameOIDSyntaxAccessStatus
MacAddress
type

Objects

NameOIDSyntaxAccessStatus
swEquipment
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.1
swEquipmentCapacity
OBJECT-TYPE
Indicates the equipment capability supported in the system.
1.3.6.1.4.1.171.12.11.1.1Bits {fanCapable(0), redundantPowerCapable(1), tempteratureDetection(2), stackingCapable(3), chassisCapable(4)}read-onlycurrent
swFanTrapState
OBJECT-TYPE
Indicate the fan warning event trap state.
1.3.6.1.4.1.171.12.11.1.4INTEGER {enabled(1), disabled(2)}read-writecurrent
swPowerTrapState
OBJECT-TYPE
Indicate the power warning event trap state.
1.3.6.1.4.1.171.12.11.1.5INTEGER {enabled(1), disabled(2)}read-writecurrent
swPowerTable
OBJECT-TYPE
A list of power information values.
1.3.6.1.4.1.171.12.11.1.6not-accessiblecurrent
swPowerEntry
OBJECT-TYPE
An entry of power information values.
1.3.6.1.4.1.171.12.11.1.6.1not-accessiblecurrent
swPowerUnitIndex
OBJECT-TYPE
Indicates the unit ID in the System.
1.3.6.1.4.1.171.12.11.1.6.1.1INTEGER (0..65535)read-onlycurrent
swPowerID
OBJECT-TYPE
Indicates ID of the power 1 : main power 2 : redundant power .
1.3.6.1.4.1.171.12.11.1.6.1.2INTEGER (0..65535)read-onlycurrent
swPowerStatus
OBJECT-TYPE
Indicates the current power status. lowVoltage : The voltage of the power unit is too low. overCurrent: The current of the power unit is too high. working : The power unit is working normally. fail : The power unit has failed. connect : The power unit is connected but not powered on. disconnect : The power unit is not connected.
1.3.6.1.4.1.171.12.11.1.6.1.3INTEGER {other(0), lowVoltage(1), overCurrent(2), working(3), fail(4), connect(5), disconnect(6)}read-onlycurrent
swFanTable
OBJECT-TYPE
A list of fan information values.
1.3.6.1.4.1.171.12.11.1.7not-accessiblecurrent
swFanEntry
OBJECT-TYPE
An entry of fan information values.
1.3.6.1.4.1.171.12.11.1.7.1not-accessiblecurrent
swFanUnitIndex
OBJECT-TYPE
Indicates the unit ID in the System.
1.3.6.1.4.1.171.12.11.1.7.1.1INTEGER (0..65535)read-onlycurrent
swFanID
OBJECT-TYPE
Indicates the unit ID.
1.3.6.1.4.1.171.12.11.1.7.1.2INTEGER (0..65535)read-onlycurrent
swFanStatus
OBJECT-TYPE
Indicates the current fan status. speed-0 : If the fan function is normal and the fan does not spin due to the temperature not reaching the threshold, the status of the fan is speed 0. speed-low : Fan spin using the lowest speed. speed-middle: Fan spin using the middle speed. speed-high : Fan spin using the highest speed.
1.3.6.1.4.1.171.12.11.1.7.1.3INTEGER {other(0), working(1), fail(2), speed-0(3), speed-low(4), speed-middle(5), speed-high(6)}read-onlycurrent
swFanPostion
OBJECT-TYPE
Indicates the position of the fan.
1.3.6.1.4.1.171.12.11.1.7.1.4INTEGER {other(1), left(2), right(3), back(4), cpu(5)}read-onlycurrent
swFanNumber
OBJECT-TYPE
Indicates the fan number.
1.3.6.1.4.1.171.12.11.1.7.1.5INTEGER (0..65535)read-onlycurrent
swFanSpeed
OBJECT-TYPE
Indicates the fan work speed(RPM).
1.3.6.1.4.1.171.12.11.1.7.1.6INTEGER (0..65535)read-onlycurrent
swTemperatureTable
OBJECT-TYPE
A list of temperature values.
1.3.6.1.4.1.171.12.11.1.8not-accessiblecurrent
swTemperatureEntry
OBJECT-TYPE
An entry of temperature values.
1.3.6.1.4.1.171.12.11.1.8.1not-accessiblecurrent
swTemperatureUnitIndex
OBJECT-TYPE
Indicates the unit ID in the System.
1.3.6.1.4.1.171.12.11.1.8.1.1INTEGER (0..65535)read-onlycurrent
swTemperatureCurrent
OBJECT-TYPE
The shelf current temperature.
1.3.6.1.4.1.171.12.11.1.8.1.2INTEGER (-500..500)read-onlycurrent
swTemperatureHighThresh
OBJECT-TYPE
The high threshold of shelf temperature.
1.3.6.1.4.1.171.12.11.1.8.1.3INTEGER (-500..500)read-writecurrent
swTemperatureLowThresh
OBJECT-TYPE
The low threshold of shelf temperature.
1.3.6.1.4.1.171.12.11.1.8.1.4INTEGER (-500..500)read-writecurrent
swUnitMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.1.9
swUnitStackingVersion
OBJECT-TYPE
This object indicates the version of this stacking system.
1.3.6.1.4.1.171.12.11.1.9.1INTEGER (0..65535)read-onlycurrent
swUnitMaxSupportedUnits
OBJECT-TYPE
The maximum number of units that are supported in the system.
1.3.6.1.4.1.171.12.11.1.9.2INTEGER (0..65535)read-onlycurrent
swUnitNumOfUnit
OBJECT-TYPE
The current number of units.
1.3.6.1.4.1.171.12.11.1.9.3INTEGER (0..65535)read-onlycurrent
swUnitMgmtTable
OBJECT-TYPE
This table contains the unit information.
1.3.6.1.4.1.171.12.11.1.9.4not-accessiblecurrent
swUnitMgmtEntry
OBJECT-TYPE
A list of management information for each unit in the system.
1.3.6.1.4.1.171.12.11.1.9.4.1not-accessiblecurrent
swUnitMgmtId
OBJECT-TYPE
This object indicates the specific entry in the stacking/chassis table.
1.3.6.1.4.1.171.12.11.1.9.4.1.1INTEGER (1..13)read-onlycurrent
swUnitMgmtMacAddr
OBJECT-TYPE
The MAC address of this unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.2MacAddressread-onlycurrent
swUnitMgmtStartPort
OBJECT-TYPE
This object indicates the starting port of this unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.3INTEGER (1..65535)read-onlycurrent
swUnitMgmtPortRange
OBJECT-TYPE
This object indicates the total ports of this unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.4INTEGER (0..65535)read-onlycurrent
swUnitMgmtFrontPanelLedStatus
OBJECT-TYPE
This object is a set of system LED indicators. The first four octets are defined as a system LED. The first LED is a power LED. The second LED in the stacking module is a master LED but in the chassis is a status LED. The third LED is a console LED. The fourth LED is an RPS (Redundancy Power Supply) LED. The other octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presented as the link/activity LED. The second byte is presented as the speed LED. system LED: 01 = fail/error/non existence. 02 = work normal. link/activity LED : The most significant bit is used for blinking/solid: 8 = The LED blinks. The second most significant bit is used for link status: 1 = link fail. 2 = link pass. speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be set to 0. Note: For the DGS-3700, the first five octets are defined as the system LED. The first LED is the power LED. The second LED is the console LED. The third LED is the RPS (Redundancy Power Supply) LED. The fourth LED is the management port LED. The fifth LED is the fan LED. For the DGS-3200-10 and DGS-3200-16, the first three octets are defined as the system LED. The first LED is the power LED. The second LED is the console LED. The third LED is the RPS (Redundancy Power Supply) LED. For the DGS-3200-24, the first three octets are defined as the system LED, the definition of the first three octets is the same as the DGS-3200-10 and DGS-3200-16, the fourth LED is the SD card LED. The following description is for the SD card LED: 01 = SD card is not present. 02 = SD card is present. 03 = fails to read/write SD card. 04 = read/write SD card successfully.
1.3.6.1.4.1.171.12.11.1.9.4.1.5OCTET STRING (SIZE(0..255))read-onlycurrent
swUnitMgmtCtrlMode
OBJECT-TYPE
This object indicates the stacking mode the user configured for the unit. This object can only be configured when the device is in standalone mode. other (1) - This object indicates the stacking mode that the user has configured for the unit. This object can only be configured when the device is in standalone mode. auto (2) - The system will auto-assign a stacking role to this unit to be: standalone(3), master(4), or slave(5). standalone (3) - The unit is forced to be in standalone mode. master (4) - The unit is forced to be in master mode. If this unit is selected to be a master, the unit can modify the configuration of the stacking system. slave (5) - The unit is forced to be in slave mode. If this unit is selected to be a slave, it can only view the configuration of the stacking system.
1.3.6.1.4.1.171.12.11.1.9.4.1.6INTEGER {other(1), auto(2), stand-alone(3), master(4), slave(5)}read-writecurrent
swUnitMgmtCurrentMode
OBJECT-TYPE
The current stacking role of this unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.7INTEGER {other(1), auto(2), stand-alone(3), master(4), slave(5), backup-master(6)}read-onlycurrent
swUnitMgmtVersion
OBJECT-TYPE
This object indicates the version of this stacking unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.8DisplayString (SIZE(0..32))read-onlycurrent
swUnitMgmtModuleName
OBJECT-TYPE
A textual string containing the stacking unit module name.
1.3.6.1.4.1.171.12.11.1.9.4.1.9DisplayString (SIZE(0..32))read-onlycurrent
swUnitMgmtPromVersion
OBJECT-TYPE
A textual string containing the PROM version of the stacking unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.10DisplayString (SIZE(0..255))read-onlycurrent
swUnitMgmtFirmwareVersion
OBJECT-TYPE
A textual string containing the firmware version of the stacking unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.11DisplayString (SIZE(0..255))read-onlycurrent
swUnitMgmtHardwareVersion
OBJECT-TYPE
A textual string containing the hardware version of the stacking unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.12DisplayString (SIZE(0..255))read-onlycurrent
swUnitMgmtPriority
OBJECT-TYPE
The Priority of the stacking unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.13INTEGER (1..63)read-writecurrent
swUnitMgmtUserSetState
OBJECT-TYPE
This object indicates the user set state of this unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.14INTEGER {other(1), auto(2), user(3)}read-onlycurrent
swUnitMgmtExistState
OBJECT-TYPE
The state of existence of this unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.15INTEGER {exist(1), no-exist(2)}read-onlycurrent
swUnitMgmtBoxId
OBJECT-TYPE
The box ID of the stacking unit. When show, it shows the current box ID of this unit; When set, it sets the new box ID, and the new box ID will take effect after the next boot.
1.3.6.1.4.1.171.12.11.1.9.4.1.16INTEGER {box-1(1), box-2(2), box-3(3), box-4(4), box-5(5), box-6(6), box-7(7), box-8(8), box-9(9), box-10(10), box-11(11), box-12(12), auto(13)}read-writecurrent
swUnitMgmtSerialNumber
OBJECT-TYPE
A text string containing the serial number of the stacking unit.
1.3.6.1.4.1.171.12.11.1.9.4.1.17DisplayStringread-onlycurrent
swUnitTopology
OBJECT-TYPE
The stacking topology state.
1.3.6.1.4.1.171.12.11.1.9.5INTEGER {stand-alone(1), duplex-chain(2), duplex-ring(3), star(4), unstable(5)}read-onlycurrent
swUnitStackMode
OBJECT-TYPE
Indicates the stacking mode supported in the system.
1.3.6.1.4.1.171.12.11.1.9.6INTEGER {enabled(1), disabled(2)}read-writecurrent
swUnitStackForceMasterRole
OBJECT-TYPE
Indicates the stack force master role mode supported in the system.
1.3.6.1.4.1.171.12.11.1.9.7INTEGER {enabled(1), disabled(2)}read-writecurrent
swUnitStackTrapState
OBJECT-TYPE
Indicates the stacking trap state.
1.3.6.1.4.1.171.12.11.1.9.8INTEGER {enabled(1), disabled(2)}read-writecurrent
swUnitStackLogState
OBJECT-TYPE
Indicates the stacking log state.
1.3.6.1.4.1.171.12.11.1.9.9INTEGER {enabled(1), disabled(2)}read-writecurrent
swExternalAlarmTable
OBJECT-TYPE
A list of the status of each of the alarm channels by this agent.
1.3.6.1.4.1.171.12.11.1.10not-accessiblecurrent
swExternalAlarmEntry
OBJECT-TYPE
An entry containing objects with the status of each alarm channel.
1.3.6.1.4.1.171.12.11.1.10.1not-accessiblecurrent
swExternalAlarmChannel
OBJECT-TYPE
The number of the alarm channel.
1.3.6.1.4.1.171.12.11.1.10.1.1INTEGERread-onlycurrent
swExternalAlarmMessage
OBJECT-TYPE
Used to configure the alarm message when an alarm occurs on this channel. If no alarm message is configured on this channel, a default alarm message will be generated.
1.3.6.1.4.1.171.12.11.1.10.1.2DisplayString (SIZE(0..128))read-writecurrent
swExternalAlarmStatus
OBJECT-TYPE
Shows the current status of each alarm channel.
1.3.6.1.4.1.171.12.11.1.10.1.3INTEGER {alarming(1), normal(2)}read-onlycurrent
swEquipmentPowerSaving
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.1.11
swEquipPowerSavingLinkDetectState
OBJECT-TYPE
Indicates the equipment reduced power consumption state.
1.3.6.1.4.1.171.12.11.1.11.1INTEGER {enabled(1), disabled(2)}read-writecurrent
swEquipPowerSavingLenDetect
OBJECT-TYPE
Indicates the equipment reduced power consumption state with a link partner.
1.3.6.1.4.1.171.12.11.1.11.2INTEGER {enabled(1), disabled(2)}read-writecurrent
swEquipPowerSavingHiberState
OBJECT-TYPE
This object indicates the power saving state of system hibernation.
1.3.6.1.4.1.171.12.11.1.11.3INTEGER {enabled(1), disabled(2)}read-writecurrent
swEquipPowerSavingPortLEDState
OBJECT-TYPE
This object indicates the power saving state of port LED.
1.3.6.1.4.1.171.12.11.1.11.4INTEGER {enabled(1), disabled(2)}read-writecurrent
swEquipPowerSavingPortState
OBJECT-TYPE
This object indicates the power saving state of port.
1.3.6.1.4.1.171.12.11.1.11.5INTEGER {enabled(1), disabled(2)}read-writecurrent
swEquipPowerSavingScheduleCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.1.11.6
swEquipPowerSavingHibernationTable
OBJECT-TYPE
A list of the system hibernation configurations of the power saving.
1.3.6.1.4.1.171.12.11.1.11.6.1not-accessiblecurrent
swEquipPowerSavingHibernationEntry
OBJECT-TYPE
An entry containing the system hibernation configurations of the power saving.
1.3.6.1.4.1.171.12.11.1.11.6.1.1not-accessiblecurrent
swEquipPowerSavingHiberRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.12.11.1.11.6.1.1.100RowStatusread-createcurrent
swEquipPowerSavingPortLedTable
OBJECT-TYPE
A list of the port LED configurations of the power saving.
1.3.6.1.4.1.171.12.11.1.11.6.2not-accessiblecurrent
swEquipPowerSavingPortLedEntry
OBJECT-TYPE
An entry containing the port LED configurations of the power saving.
1.3.6.1.4.1.171.12.11.1.11.6.2.1not-accessiblecurrent
swEquipPowerSavingPortLedRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.12.11.1.11.6.2.1.100RowStatusread-createcurrent
swEquipPowerSavingPortTable
OBJECT-TYPE
A list of the port configurations of the power saving.
1.3.6.1.4.1.171.12.11.1.11.6.3not-accessiblecurrent
swEquipPowerSavingPortEntry
OBJECT-TYPE
An entry containing the port configurations of the power saving.
1.3.6.1.4.1.171.12.11.1.11.6.3.1not-accessiblecurrent
swEquipPowerSavingPortIndex
OBJECT-TYPE
Indicates the module's port number.(1..Max port number in the module).
1.3.6.1.4.1.171.12.11.1.11.6.3.1.1INTEGERnot-accessiblecurrent
swEquipPowerSavingPortRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.12.11.1.11.6.3.1.100RowStatusread-createcurrent
swEquipEeeMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.1.11.20
swEquipEeeState
OBJECT-TYPE
This object indicates the EEE state of all ports. Note: If the port's bit has a value of '1', specifies the EEE (Energy Efficient Ethernet) state of this port is 'Enabled', otherwise, if the port's bit has a value of '0', specifies the EEE state of this port is 'Disabled'.
1.3.6.1.4.1.171.12.11.1.11.20.1PortListread-writecurrent
swEquipmentTemperatureCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.1.12
swTemperatureTrapState
OBJECT-TYPE
This object can enable or disable the warning temperature trap.
1.3.6.1.4.1.171.12.11.1.12.1INTEGER {enabled(1), disabled(2)}read-writecurrent
swTemperatureLogState
OBJECT-TYPE
This object can enable or disable the warning temperature log.
1.3.6.1.4.1.171.12.11.1.12.2INTEGER {enabled(1), disabled(2)}read-writecurrent
swEquipmentLEDCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.1.13
swEquipmentPortLEDState
OBJECT-TYPE
This object indicates the LED admin state of all ports.
1.3.6.1.4.1.171.12.11.1.13.1INTEGER {enabled(1), disabled(2)}read-writecurrent
swExternalAlarmStackingTable
OBJECT-TYPE
A list of the status of each of the alarm channels by this agent.
1.3.6.1.4.1.171.12.11.1.15not-accessiblecurrent
swExternalAlarmStackingEntry
OBJECT-TYPE
An entry containing objects with the status of each alarm channel.
1.3.6.1.4.1.171.12.11.1.15.1not-accessiblecurrent
swExternalAlarmStackingUnitIndex
OBJECT-TYPE
Indicates the unit ID in the System..
1.3.6.1.4.1.171.12.11.1.15.1.1INTEGERnot-accessiblecurrent
swExternalAlarmStackingChannel
OBJECT-TYPE
The number of the alarm channel.
1.3.6.1.4.1.171.12.11.1.15.1.2INTEGERnot-accessiblecurrent
swExternalAlarmStackingMessage
OBJECT-TYPE
Used to configure the alarm message when an alarm occurs on this channel. If no alarm message is configured on this channel, a default alarm message will be generated.
1.3.6.1.4.1.171.12.11.1.15.1.3DisplayString (SIZE(0..128))read-writecurrent
swExternalAlarmStackingStatus
OBJECT-TYPE
Shows the current status of each alarm channel.
1.3.6.1.4.1.171.12.11.1.15.1.4INTEGER {alarming(1), normal(2)}read-onlycurrent
swEquipmentNotify
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2
swEquipmentNotifyMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.1
swEquipUnitNotifyMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.1.1
swUnitInsertSeverity
OBJECT-TYPE
Indicates the swUnitInsert detection level.
1.3.6.1.4.1.171.12.11.2.1.1.1AgentNotifyLevelread-writecurrent
swUnitRemoveSeverity
OBJECT-TYPE
Indicates the swUnitRemove detection level.
1.3.6.1.4.1.171.12.11.2.1.1.2AgentNotifyLevelread-writecurrent
swUnitFailureSeverity
OBJECT-TYPE
Indicates the swUnitFailure detection level.
1.3.6.1.4.1.171.12.11.2.1.1.3AgentNotifyLevelread-writecurrent
swEquipPowerNotifyMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.1.2
swPowerStatusChgSeverity
OBJECT-TYPE
Indicates the swPowerStatusChg detection level.
1.3.6.1.4.1.171.12.11.2.1.2.1AgentNotifyLevelread-writecurrent
swPowerFailureSeverity
OBJECT-TYPE
Indicates the swPowerFailure detection level.
1.3.6.1.4.1.171.12.11.2.1.2.2AgentNotifyLevelread-writecurrent
swPowerRecoverSeverity
OBJECT-TYPE
Indicates the swPowerRecover detection level.
1.3.6.1.4.1.171.12.11.2.1.2.3AgentNotifyLevelread-writecurrent
swEquipFanNotifyMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.1.3
swFanFailureSeverity
OBJECT-TYPE
Indicates the swFanFailure detection level.
1.3.6.1.4.1.171.12.11.2.1.3.1AgentNotifyLevelread-writecurrent
swFanRecoverSeverity
OBJECT-TYPE
Indicates the swFanRecover detection level.
1.3.6.1.4.1.171.12.11.2.1.3.2AgentNotifyLevelread-writecurrent
swEquipTemperatureNotifyMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.1.4
swHighTemperatureSeverity
OBJECT-TYPE
Indicates the swHighTemperature detection level.
1.3.6.1.4.1.171.12.11.2.1.4.1AgentNotifyLevelread-writecurrent
swHighTemperatureRecoverSeverity
OBJECT-TYPE
Indicates the swHighTemperatureRecover detection level.
1.3.6.1.4.1.171.12.11.2.1.4.2AgentNotifyLevelread-writecurrent
swLowTemperatureSeverity
OBJECT-TYPE
Indicates the swLowTemperature detection level.
1.3.6.1.4.1.171.12.11.2.1.4.3AgentNotifyLevelread-writecurrent
swLowTemperatureRecoverSeverity
OBJECT-TYPE
Indicates the swLowTemperatureRecover detection level.
1.3.6.1.4.1.171.12.11.2.1.4.4AgentNotifyLevelread-writecurrent
swEquipmentNotification
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2
swEquipUnitNotification
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2.1
swEquipUnitNotifyPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2.1.0
swEquipPowerNotification
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2.2
swEquipPowerNotifyPerfix
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2.2.0
swEquipFanNotification
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2.3
swEquipFanNotifyPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2.3.0
swEquipTemperatureNotification
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2.4
swEquipTemperatureNotifyPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2.4.0
swEquipExternalAlarmNotification
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2.5
swEquipExternalAlarmNotifyPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.2.5.0
swNotificationBindings
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.3
swEquipTemperNotifyBindings
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.3.1
swTemperSensorID
OBJECT-TYPE
This object indicates the ID of the temperature sensor in the unit.
1.3.6.1.4.1.171.12.11.2.3.1.1INTEGERaccessible-for-notifycurrent
swEquipUnitNotifyBindings
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.11.2.3.2
swStackTopologyType
OBJECT-TYPE
This object indicates the MAC address of the switch.
1.3.6.1.4.1.171.12.11.2.3.2.1INTEGER {chain(1), ring(2)}accessible-for-notifycurrent
swStackRoleChangeType
OBJECT-TYPE
This object indicates the role information of the switch.
1.3.6.1.4.1.171.12.11.2.3.2.2INTEGER {backup-to-master(1), slave-to-master(2)}accessible-for-notifycurrent

Notifications

NameOIDStatus
swUnitInsert
NOTIFICATION-TYPE
Unit Hot Insert notification.
1.3.6.1.4.1.171.12.11.2.2.1.0.1current
swUnitRemove
NOTIFICATION-TYPE
Unit Hot Remove notification.
1.3.6.1.4.1.171.12.11.2.2.1.0.2current
swUnitFailure
NOTIFICATION-TYPE
Unit Failure notification.
1.3.6.1.4.1.171.12.11.2.2.1.0.3current
swUnitTPChange
NOTIFICATION-TYPE
The stacking topology change notification.
1.3.6.1.4.1.171.12.11.2.2.1.0.4current
swUnitRoleChange
NOTIFICATION-TYPE
The stacking unit role change notification.
1.3.6.1.4.1.171.12.11.2.2.1.0.5current
swPowerStatusChg
NOTIFICATION-TYPE
Power Status change notification. The notification is issued when the swPowerStatus changes in the following cases: lowVoltage -> overCurrent. lowVoltage -> working. lowVoltage -> disconnect. lowVoltage -> connect. overCurrent -> lowVoltage. overCurrent -> working. overCurrent -> disconnect. overCurrent -> connect. working -> lowVoltage. working -> overCurrent. working -> connect. working -> disconnect. fail -> connect. fail -> disconnect. connect -> lowVoltage. connect -> overCurrent. connect -> working. connect -> disconnect. disconnect -> lowVoltage. disconnect -> overCurrent. disconnect -> working. disconnect -> connect.
1.3.6.1.4.1.171.12.11.2.2.2.0.1current
swPowerFailure
NOTIFICATION-TYPE
Power Failure notification. The notification is issued when the swPowerStatus changes in the following cases: lowVoltage -> fail. overCurrent -> fail. working -> fail. connect -> fail. disconnect -> fail.
1.3.6.1.4.1.171.12.11.2.2.2.0.2current
swPowerRecover
NOTIFICATION-TYPE
Power Recover notification. The notification is issued when the swPowerStatus changes in the following cases: fail -> lowVoltage. fail -> overCurrent. fail -> working.
1.3.6.1.4.1.171.12.11.2.2.2.0.3current
swFanFailure
NOTIFICATION-TYPE
Fan Failure notification.
1.3.6.1.4.1.171.12.11.2.2.3.0.1current
swFanRecover
NOTIFICATION-TYPE
Fan Recover notification.
1.3.6.1.4.1.171.12.11.2.2.3.0.2current
swHighTemperature
NOTIFICATION-TYPE
High Temperature notification.
1.3.6.1.4.1.171.12.11.2.2.4.0.1current
swHighTemperatureRecover
NOTIFICATION-TYPE
High Temperature notification.
1.3.6.1.4.1.171.12.11.2.2.4.0.2current
swLowTemperature
NOTIFICATION-TYPE
Low Temperature notification.
1.3.6.1.4.1.171.12.11.2.2.4.0.3current
swLowTemperatureRecover
NOTIFICATION-TYPE
Low Temperature notification.
1.3.6.1.4.1.171.12.11.2.2.4.0.4current
swExternalAlarm
NOTIFICATION-TYPE
The notice of an Alarm in the specified channel.
1.3.6.1.4.1.171.12.11.2.2.5.0.1current
swExternalAlarmStacking
NOTIFICATION-TYPE
The notice of an Alarm in the specified channel.
1.3.6.1.4.1.171.12.11.2.2.5.0.2current