ENTERASYS-VLAN-AUTHORIZATION-MIB
- Registered at
- 1.3.6.1.4.1.5624.1.2.48
- Last updated
- 2004-06-02 19:22
- Organization
- Enterasys Networks, Inc
- Revisions
- 2004-06-02 19:22
- Namespace
- enterasys
- Source file
ENTERASYS-VLAN-AUTHORIZATION-MIB- Digest
sha256:f40995c6f9c5054663b12a5ed8860f8632f3b29db91195152a97d1dc2f0db141
Description
This MIB module defines a portion of the SNMP MIB under Enterasys Networks' enterprise OID pertaining to proprietary extensions to the IETF Q-BRIDGE-MIB, as specified in RFC2674, pertaining to VLAN authorization, as specified in RFC3580. Specifically, the enabling and disabling of support for the VLAN Tunnel-Type attribute returned from a RADIUS authentication, and how that attribute is applied to the port which initiated the authentication.
Contact
Postal: Enterasys Networks, Inc. 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com
Imports
| From | Symbols |
|---|---|
| BRIDGE-MIB | dot1dBasePortEntry |
| ENTERASYS-MIB-NAMES | etsysModules |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB ENTERASYS-MIB-NAMES ENTERASYS-VLAN-AUTHORIZATION-MIB IANAifType-MIB IF-MIB P-BRIDGE-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| VlanAuthEgressStatus TEXTUAL-CONVENTION The possible egress configurations which may be applied in response to a successful authentication. none(1) No egress manipulation will be made. tagged(2) The authenticating port will be added to the current egress for the VLAN-ID returned. untagged(3) The authenticating port will be added to the current untagged egress for the VLAN-ID returned. dynamic(4) The authenticating port will use information returned in the authentication response to modify the current egress lists. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| etsysVlanAuthorizationObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.48.1 | |||
| etsysVlanAuthorizationSystem OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.48.1.1 | |||
| etsysVlanAuthorizationEnable OBJECT-TYPE The enable/disable state for the VLAN authorization feature. When disabled, no modifications to the VLAN attributes related to packet switching should be enforced. | 1.3.6.1.4.1.5624.1.2.48.1.1.1 | EnabledStatus | read-write | current |
| etsysVlanAuthorizationPorts OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.48.1.2 | |||
| etsysVlanAuthorizationTable OBJECT-TYPE Extensions to the table that contains information about every port that is associated with this transparent bridge. | 1.3.6.1.4.1.5624.1.2.48.1.2.1 | not-accessible | current | |
| etsysVlanAuthorizationEntry OBJECT-TYPE A list of extensions that support the management of proprietary features for each port of a transparent bridge. This is indexed by dot1dBasePort. | 1.3.6.1.4.1.5624.1.2.48.1.2.1.1 | not-accessible | current | |
| etsysVlanAuthorizationStatus OBJECT-TYPE The enabled/disabled status for the application of VLAN authorization on this port, if disabled, the information returned in the VLAN-Tunnel-Type from the authentication will not be applied to the port (although it should be represented in this table). If enabled, those results will be applied to the port. | 1.3.6.1.4.1.5624.1.2.48.1.2.1.1.1 | EnabledStatus | read-write | current |
| etsysVlanAuthorizationAdminEgress OBJECT-TYPE Controls the modification of the current vlan egress list (of the vlan returned in the VLAN-Tunnel-Type, and reported by etsysVlanAuthorizationVlanID) upon successful authentication in the following manner: none(1) No egress manipulation will be made. tagged(2) The authenticating port will be added to the current egress for the VLAN-ID returned. untagged(3) The authenticating port will be added to the current untagged egress for the VLAN-ID returned. dynamic(4) The authenticating port will use information returned in the authentication response to modify the current egress lists. This value is supported only if the device supports a mechanism through which the egress status may be returned through the RADIUS response. Should etsysVlanAuthorizationEnable become disabled, etsysVlanAuthorizationStatus become disabled for a port, or should etsysVlanAuthorizationVlanID become 0 or 4095, all effect on the port egress MUST be removed. | 1.3.6.1.4.1.5624.1.2.48.1.2.1.1.2 | VlanAuthEgressStatus | read-write | current |
| etsysVlanAuthorizationOperEgress OBJECT-TYPE Reports the current state of modification to the current vlan egress list (of the vlan returned in the VLAN-Tunnel-Type) upon successful authentication, if etsysVlanAuthorizationStatus is enabled, in the following manner: none(1) No egress manipulation will be made. tagged(2) The authenticating port will be added to the current egress for the VLAN-ID returned. untagged(3) The authenticating port will be added to the current untagged egress for the VLAN-ID returned. The purpose of this leaf is to report, specifically when etsysVlanAuthorizationAdminEgress has been set to dynamic(4), the currently enforced egress modification. If the port is unauthenticated, or no VLAN-ID has been applied, this leaf should return none(1). | 1.3.6.1.4.1.5624.1.2.48.1.2.1.1.3 | VlanAuthEgressStatus | read-only | current |
| etsysVlanAuthorizationVlanID OBJECT-TYPE The 12 bit VLAN identifier for a given port, used to override the PVID of the given port, obtained as a result of an authentication. A value of zero indicates that there is no authenticated VLAN ID for the given port. Should a port become unauthenticated this value MUST be returned to zero. A value of 4095 indicates that a the port has been authenticated, but that the VLAN returned could not be applied to the port (possibly because of resource constraints or misconfiguration). In this instance, the original PVID should still be applied. Should the feature become disabled or the session terminate, all effect on the Port VLAN ID MUST be removed. | 1.3.6.1.4.1.5624.1.2.48.1.2.1.1.4 | Integer32 (0 | 1..4094 | 4095) | read-only | current |
| etsysVlanAuthorizationConformance OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.48.2 | |||
| etsysVlanAuthorizationGroups OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.48.2.1 | |||
| etsysVlanAuthorizationCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.48.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| etsysVlanAuthorizationGroup OBJECT-GROUP A collection of objects relating to VLAN Authorization. | 1.3.6.1.4.1.5624.1.2.48.2.1.1 | current |
| etsysVlanAuthorizationCompliance MODULE-COMPLIANCE The compliance statement for devices that support the Enterasys VLAN Authorization MIB. | 1.3.6.1.4.1.5624.1.2.48.2.2.1 | current |