ENTERASYS-MSTP-MIB
- Registered at
- 1.3.6.1.4.1.5624.1.2.28
- Last updated
- 2006-11-09 16:40
- Organization
- Enterasys Networks, Inc
- Revisions
- 2006-11-09 16:40, 2006-10-04 19:54, 2004-07-14 16:25, 2004-04-08 19:59, 2004-02-12 21:38, 2003-01-21 14:27, 2002-10-11 17:05
- Namespace
- enterasys
- Source file
ENTERASYS-MSTP-MIB- Digest
sha256:754c8278a0238b9ae23c44bcdd17e408ab25c5ed3e3d5e75e832972c37e31b76
Description
This mib module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to the Multiple Spanning Tree Protocol defined by IEEE 802.1s. This MIB is used to manage devices which support MSTP. It will be supported until a standard IEEE 802.1s MIB has been defined by the IETF.
Contact
Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com
Imports
| From | Symbols |
|---|---|
| BRIDGE-MIB | BridgeId |
| ENTERASYS-MIB-NAMES | etsysModules |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB ENTERASYS-MIB-NAMES ENTERASYS-MSTP-MIB IANAifType-MIB IF-MIB P-BRIDGE-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HexString TEXTUAL-CONVENTION An OCTET-STRING with a suitable display hint. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| etsysMstpObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.28.1 | |||
| etsysMstpNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.28.1.0 | |||
| etsysMstpConfig OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.28.1.1 | |||
| etsysMstpMaxMstId OBJECT-TYPE The maximum Multiple Spanning Tree (MST) instance ID that this device supports. | 1.3.6.1.4.1.5624.1.2.28.1.1.1 | Unsigned32 | read-only | current |
| etsysMstpMaxSupportedMsts OBJECT-TYPE The maximum number of Multiple Spanning Tree instances that this device supports. The value of this object is not affected by the value of etsysMstpMaxConfigurableMsts. This object represents the maximum value that etsysMstpMaxConfigurableMsts can be set to. | 1.3.6.1.4.1.5624.1.2.28.1.1.2 | Unsigned32 | read-only | current |
| etsysMstpNumMsts OBJECT-TYPE The current number of Multiple Spanning Tree instances that are configured in this device. | 1.3.6.1.4.1.5624.1.2.28.1.1.3 | Unsigned32 | read-only | current |
| etsysMstpMstiTable OBJECT-TYPE The list of configured Multiple Spanning Tree instances. | 1.3.6.1.4.1.5624.1.2.28.1.1.4 | not-accessible | current | |
| etsysMstpMstiEntry OBJECT-TYPE A table entry representing a Multiple Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.1.4.1 | not-accessible | current | |
| etsysMstpMstId OBJECT-TYPE The unique ID of this Multiple Spanning Tree instance. This value SHALL be between 1 and etsysMstpMaxMstId inclusively. | 1.3.6.1.4.1.5624.1.2.28.1.1.4.1.1 | Unsigned32 | not-accessible | current |
| etsysMstpMstiStatus OBJECT-TYPE This object allows for the dynamic creation and deletion of the corresponding Spanning Tree instance. Creation and activation of a conceptual row in this table MUST be performed as a single operation -- by setting this object to createAndGo(4) -- and suspension of an active conceptual row is not supported. Consequently, setting this object to createAndWait(5) or notInService(2) SHALL fail. Setting this object to destroy(6) SHALL fail if the corresponding Spanning Tree instance has one or more FIDs allocated to it in the FID to MSTID Allocation Table (etsysMstpAllocTable). Refer to the RowStatus convention for further details on the behavior of this object. | 1.3.6.1.4.1.5624.1.2.28.1.1.4.1.2 | RowStatus | read-create | current |
| etsysMstpAllocTable OBJECT-TYPE A table that contains the mapping of Filtering Databases to Spanning Tree instances. | 1.3.6.1.4.1.5624.1.2.28.1.1.5 | not-accessible | current | |
| etsysMstpAllocEntry OBJECT-TYPE The mapping of a particular Filtering Database to a Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.1.5.1 | not-accessible | current | |
| etsysMstpFdbId OBJECT-TYPE The unique ID of the Filtering Database to which the information in this table entry applies. This value SHALL be between 1 and dot1qMaxVlanId inclusively. | 1.3.6.1.4.1.5624.1.2.28.1.1.5.1.1 | Unsigned32 | not-accessible | current |
| etsysMstpMstIdOfFdb OBJECT-TYPE The ID of the Spanning Tree instance to which the corresponding FID is mapped. This ID must either be 0 (i.e., the CIST) or be a value which is present in the MSTI Table (etsysMstpMstiTable). | 1.3.6.1.4.1.5624.1.2.28.1.1.5.1.2 | Unsigned32 | read-write | current |
| etsysMstpConfigTable OBJECT-TYPE A table that contains the mapping of VLANs to Spanning Tree instances. This table is a read-only table, its elements derived from the VID to FID allocation table and the FID to MSTID allocation table. | 1.3.6.1.4.1.5624.1.2.28.1.1.6 | not-accessible | current | |
| etsysMstpConfigEntry OBJECT-TYPE The mapping of a particular VLAN to a Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.1.6.1 | not-accessible | current | |
| etsysMstpVlanId OBJECT-TYPE The unique ID of the VLAN to which the information in this table entry applies. This value SHALL be between 1 and dot1qMaxVlanId inclusively. | 1.3.6.1.4.1.5624.1.2.28.1.1.6.1.1 | Unsigned32 | not-accessible | current |
| etsysMstpMstIdOfVlan OBJECT-TYPE The ID of the Spanning Tree instance to which the corresponding VLAN is mapped. | 1.3.6.1.4.1.5624.1.2.28.1.1.6.1.2 | Unsigned32 | read-only | current |
| etsysMstpFormatSelector OBJECT-TYPE The format selector value of the Configuration Identifier. This has a value of 0 to indicate the format specified in the IEEE 802.1s standard. | 1.3.6.1.4.1.5624.1.2.28.1.1.7 | Unsigned32 | read-only | current |
| etsysMstpConfigName OBJECT-TYPE The configuration name of the MST region to which this bridge belongs. The default value is the Bridge Address of this bridge, as a text string using the Hexadecimal Representation defined in IEEE Std. 802. | 1.3.6.1.4.1.5624.1.2.28.1.1.8 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| etsysMstpRevisionLevel OBJECT-TYPE The revision level of the MST region to which this bridge belongs. | 1.3.6.1.4.1.5624.1.2.28.1.1.9 | Unsigned32 (0..65535) | read-write | current |
| etsysMstpConfigDigest OBJECT-TYPE The Configuration Digest derived from the MST Configuration Table. | 1.3.6.1.4.1.5624.1.2.28.1.1.10 | HexString (SIZE(16)) | read-only | current |
| etsysMstpMaxConfigurableMsts OBJECT-TYPE The maximum number of Multiple Spanning Tree instances that can configured on this entity. This object cannot be set to a value greater than the value of etsysMstpMaxSupportedMsts, and cannot be set to a value that is less then the number of currently configured spanning tree instances. | 1.3.6.1.4.1.5624.1.2.28.1.1.11 | Unsigned32 | read-write | current |
| etsysMstpBridge OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.28.1.2 | |||
| etsysMstpCistRegionalRootIdentifier OBJECT-TYPE The Bridge Identifier of the current CIST Regional Root. | 1.3.6.1.4.1.5624.1.2.28.1.2.1 | BridgeId | read-only | current |
| etsysMstpCistPathCost OBJECT-TYPE The CIST path cost from this bridge to the CIST Regional Root. | 1.3.6.1.4.1.5624.1.2.28.1.2.2 | Unsigned32 | read-only | current |
| etsysMstpMaxHopCount OBJECT-TYPE The maximum number of hops that the information for a particular Spanning Tree instance may traverse (via relay of BPDUs within the applicable MST region) before being discarded. This value is used only if this bridge is the CIST Regional Root and/or the MSTI Regional Root for one or more Multiple Spanning Tree instances. | 1.3.6.1.4.1.5624.1.2.28.1.2.3 | Unsigned32 (0..255) | read-write | current |
| etsysMstpBridgeTable OBJECT-TYPE A table that contains bridge protocol parameter values associated with each configured Multiple Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.2.4 | not-accessible | current | |
| etsysMstpBridgeEntry OBJECT-TYPE A list of information maintained by each Multiple Spanning Tree instance configured on this bridge. | 1.3.6.1.4.1.5624.1.2.28.1.2.4.1 | not-accessible | current | |
| etsysMstpBridgePriority OBJECT-TYPE The value of the priority component of the Bridge ID for the corresponding Spanning Tree instance. Specifically, the four most significant bits of the most significant octet of the (8 octet long) Bridge ID followed by 12 zero bits. Note that this object may only be set to a 16-bit value in which the least significant 12 bits are zero, i.e., permissible values are 0-61440, in steps of 4096. | 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.1 | Unsigned32 (0..61440) | read-write | current |
| etsysMstpTimeSinceTopologyChange OBJECT-TYPE The elapsed time, in units of hundredths of a second, since the last time a topology change was detected by the corresponding Spanning Tree instance (specifically, the elapsed time since the tcWhile timer for any port was non-zero). | 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.2 | TimeTicks | read-only | current |
| etsysMstpTopologyChangeCount OBJECT-TYPE The total number of topology changes detected by the corresponding Spanning Tree instance since the management entity was last reset or initialized (specifically, the count of times that the tcWhile timer for any port has been non-zero). | 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.3 | Counter32 | read-only | current |
| etsysMstpTopologyChangeInProgress OBJECT-TYPE True(1) if the tcWhile timer is non-zero for any port for the corresponding Spanning Tree instance, false(2) otherwise. | 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.4 | TruthValue | read-only | current |
| etsysMstpDesignatedRoot OBJECT-TYPE The bridge identifier of the root for the corresponding Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.5 | BridgeId | read-only | current |
| etsysMstpRootPathCost OBJECT-TYPE The cost of the path to the root of the corresponding Spanning Tree instance as seen from this bridge. | 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.6 | Unsigned32 | read-only | current |
| etsysMstpRootPort OBJECT-TYPE The port number of the port which offers the lowest cost path from this bridge to the root bridge for the corresponding Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.2.4.1.7 | Unsigned32 | read-only | current |
| etsysMstpPort OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.28.1.3 | |||
| etsysMstpPortTable OBJECT-TYPE A table that contains port parameter values for each configured Multiple Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.3.1 | not-accessible | current | |
| etsysMstpPortEntry OBJECT-TYPE A list of information maintained for every port by each Multiple Spanning Tree instance configured on this bridge. | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1 | not-accessible | current | |
| etsysMstpPortNumber OBJECT-TYPE The port number of the port for which this entry contains Multiple Spanning Tree Protocol management information. | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.1 | InterfaceIndex | not-accessible | current |
| etsysMstpPortPriority OBJECT-TYPE The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID for the corresponding Spanning Tree instance. Permissible values are 0-240, in steps of 16. | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.2 | Unsigned32 (0..240) | read-write | current |
| etsysMstpPortState OBJECT-TYPE The port's current state in the corresponding Spanning Tree instance as defined by application of the Multiple Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are administratively disabled (see dot1dStpPortEnable), this object will have a value of disabled(1). | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.3 | INTEGER {disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)} | read-only | current |
| etsysMstpPortAdminPathCost OBJECT-TYPE The administratively assigned value for the contribution of this port to the path cost of paths towards the root of the corresponding Spanning Tree instance. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port for this instance. If the default Path Cost is being used, this object returns '0' when read. This complements the object etsysMstpPortOperPathCost, which returns the operational value of the path cost. | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.4 | Unsigned32 (0..200000000) | read-write | current |
| etsysMstpPortOperPathCost OBJECT-TYPE The operational value for the contribution of this port to the path cost of paths towards the root of the corresponding Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.5 | Unsigned32 | read-only | current |
| etsysMstpPortDesignatedRoot OBJECT-TYPE The unique Bridge Identifier of the Bridge recorded as the Root of the corresponding Spanning Tree in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.6 | BridgeId | read-only | current |
| etsysMstpPortDesignatedCost OBJECT-TYPE The path cost of the Designated Port of the segment connected to this port, for the corresponding Spanning Tree instance. This value is compared to the Root Path Cost field in received bridge PDUs. | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.7 | Unsigned32 | read-only | current |
| etsysMstpPortDesignatedBridge OBJECT-TYPE The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment on the corresponding Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.8 | BridgeId | read-only | current |
| etsysMstpPortDesignatedPort OBJECT-TYPE The Port Identifier of the port on the Designated Bridge for this port's segment on the corresponding Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.9 | OCTET STRING | read-only | current |
| etsysMstpPortRoleValue OBJECT-TYPE Indicates this port's role on the corresponding Spanning Tree instance. disabled -- this port has no role on this MST instance. root -- this port has the role of root port on this MST instance. designated -- this port has the role of designated port on this MST instance. alternate -- this port has the role of alternate port on this MST instance. backUp -- this port has the role of backup port on this MST instance. master -- this port has the role of master port on this MST instance. | 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.10 | INTEGER {disabled(1), root(2), designated(3), alternate(4), backUp(5), master(6)} | read-only | current |
| etsysMstpGlobalPortTable OBJECT-TYPE A table that contains port parameter values which apply to all Spanning Tree instances. | 1.3.6.1.4.1.5624.1.2.28.1.3.2 | not-accessible | current | |
| etsysMstpGlobalPortEntry OBJECT-TYPE A list of information maintained for every port which applies to all Spanning Tree instances. | 1.3.6.1.4.1.5624.1.2.28.1.3.2.1 | not-accessible | current | |
| etsysMstpHelloTime OBJECT-TYPE The amount of time, in hundredths of a second, between the transmission of Configuration bridge PDUs on this port when it has the role of designated port for any Spanning Tree instance. This is the actual value that this bridge is currently using. | 1.3.6.1.4.1.5624.1.2.28.1.3.2.1.1 | Unsigned32 | read-only | current |
| etsysMstpPortHelloTime OBJECT-TYPE The value, in hundredths of a second, that all bridges attached to this port's LAN segment use for HelloTime when this bridge is acting as the CIST root. | 1.3.6.1.4.1.5624.1.2.28.1.3.2.1.2 | Unsigned32 (100..1000) | read-write | current |
| etsysMstpBoundaryPort OBJECT-TYPE True(1) if this port is attached to a LAN which is in a different MST Region than this bridge, false(2) otherwise. | 1.3.6.1.4.1.5624.1.2.28.1.3.2.1.3 | TruthValue | read-only | current |
| etsysMstpExtn OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.28.1.4 | |||
| etsysMstpAutoEdgeDetection OBJECT-TYPE The enabled/disabled status of automatic edge detection. | 1.3.6.1.4.1.5624.1.2.28.1.4.1 | EnabledStatus | read-write | current |
| etsysMstpBridgeHelloTimeMode OBJECT-TYPE The enabled/disabled status of the legacy bridge hello mode of operation. When enabled, and this bridge is acting as the root bridge, dot1dStpBridgeHelloTime is used. When disabled, and this bridge is acting as the root bridge, etsysMstpPortHelloTime is used. | 1.3.6.1.4.1.5624.1.2.28.1.4.2 | EnabledStatus | read-write | current |
| etsysMstpMstiExtnTable OBJECT-TYPE Extensions to the table of Multiple Spanning Tree instances. | 1.3.6.1.4.1.5624.1.2.28.1.4.3 | not-accessible | current | |
| etsysMstpMstiExtnEntry OBJECT-TYPE A list of extensions to the information maintained for each Multiple Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.4.3.1 | not-accessible | current | |
| etsysMstpMstiExtnBackupRootEnable OBJECT-TYPE The enabled/disabled status of the Backup Root functionality on this MSTI. | 1.3.6.1.4.1.5624.1.2.28.1.4.3.1.1 | EnabledStatus | read-write | current |
| etsysMstpPortExtnTable OBJECT-TYPE Extensions to the table that contains port parameter values for each configured Multiple Spanning Tree instance. | 1.3.6.1.4.1.5624.1.2.28.1.4.4 | not-accessible | current | |
| etsysMstpPortExtnEntry OBJECT-TYPE A list of extensions to the information maintained for every port by each Multiple Spanning Tree instance configured on this bridge. | 1.3.6.1.4.1.5624.1.2.28.1.4.4.1 | not-accessible | current | |
| etsysMstpPortExtnNonForwardingReason OBJECT-TYPE Indicates the reason why this port has been placed in a non-forwarding state on this MSTI (other than as a result of normal Spanning Tree protocol operation). none(1) - the port has not been placed in a non-forwarding state due to any exceptional condition. disputed(2) - the port has been placed in listening state because it has a designated role and an inferior designated BPDU has been received. spanGuardLocked(3) - the port has been placed in blocking state because it is configured as an admin edge port and a BPDU has been received. loopProtectEvent(4) - the port has been placed in listening or blocking state because a BPDU timeout has occurred and the port is awaiting reception of a type 2 BPDU on a point-to-point link. loopProtectAdvisory(5) - the port has been placed in listening state because a BPDU timeout has occurred (as with a Loop Protect event), but this condition may be normal because the link partner does not support the Loop Protect feature. loopbackDetected(6) - the port has been placed in blocking state because a loopback condition has been detected. | 1.3.6.1.4.1.5624.1.2.28.1.4.4.1.1 | INTEGER {none(1), disputed(2), spanGuardLocked(3), loopProtectEvent(4), loopProtectAdvisory(5), loopbackDetected(6)} | read-only | current |
| etsysMstpPortExtnLoopProtectEnable OBJECT-TYPE The enabled/disabled status of the Loop Protect functionality for this port on this MSTI. | 1.3.6.1.4.1.5624.1.2.28.1.4.4.1.2 | EnabledStatus | read-write | current |
| etsysMstpPortExtnLoopProtectBlocking OBJECT-TYPE The state of this port on this MSTI with respect to the Loop Protect feature. true(1) - this port is being held in the blocking state by the Loop Protect feature. false(2) - this port is not being held in the blocking state by the Loop Protect feature. When this object has a value of true(1) setting its value to false(2) will cause the Loop Protect feature to no longer hold the port in the blocking state. All other set operations on this object are undefined and MUST NOT have any effect. | 1.3.6.1.4.1.5624.1.2.28.1.4.4.1.3 | TruthValue | read-write | current |
| etsysMstpConformance OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.28.2 | |||
| etsysMstpGroups OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.28.2.1 | |||
| etsysMstpCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.5624.1.2.28.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| etsysMstpLoopProtectEvent NOTIFICATION-TYPE This notification indicates that a Loop Protect event has occurred on a bridge port on an MSTI. | 1.3.6.1.4.1.5624.1.2.28.1.0.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| etsysMstpConfigGroup OBJECT-GROUP A collection of objects providing configuration support for the Multiple Spanning Tree Protocol. | 1.3.6.1.4.1.5624.1.2.28.2.1.1 | current |
| etsysMstpBridgeGroup OBJECT-GROUP A collection of objects providing bridge-level support for the Multiple Spanning Tree Protocol. | 1.3.6.1.4.1.5624.1.2.28.2.1.2 | current |
| etsysMstpPortGroup OBJECT-GROUP A collection of objects providing port-level support for the Multiple Spanning Tree Protocol. | 1.3.6.1.4.1.5624.1.2.28.2.1.3 | current |
| etsysMstpAutoEdgeDetectGroup OBJECT-GROUP An object for controlling Auto Edge Detection. | 1.3.6.1.4.1.5624.1.2.28.2.1.4 | current |
| etsysMstpBridgeHelloTimeGroup OBJECT-GROUP An object for modifying the Hello Time mode. | 1.3.6.1.4.1.5624.1.2.28.2.1.5 | current |
| etsysMstpBackupRootGroup OBJECT-GROUP An object for enabling and disabling the Backup Root feature. | 1.3.6.1.4.1.5624.1.2.28.2.1.6 | current |
| etsysMstpMaxInstancesGroup OBJECT-GROUP An object for restricting the number of configurable MSTIs. | 1.3.6.1.4.1.5624.1.2.28.2.1.7 | current |
| etsysMstpNonForwardingReasonGroup OBJECT-GROUP An object that indicates the reason for an exceptional non-forwarding condition per port/MSTI. | 1.3.6.1.4.1.5624.1.2.28.2.1.8 | current |
| etsysMstpLoopProtectGroup OBJECT-GROUP A collection of objects providing support for the Loop Protect feature. | 1.3.6.1.4.1.5624.1.2.28.2.1.9 | current |
| etsysMstpLoopProtectNotificationGroup NOTIFICATION-GROUP The Loop Protect Event Notification for MSTIs. | 1.3.6.1.4.1.5624.1.2.28.2.1.10 | current |
| etsysMstpCompliance MODULE-COMPLIANCE The compliance statement for devices that support the Multiple Spanning Tree Protocol. | 1.3.6.1.4.1.5624.1.2.28.2.2.1 | current |